ISO-10303-21;
HEADER;
FILE_DESCRIPTION ((), '1');
FILE_NAME ('40.32.480.stp', '2017-08-03T10:30:54', ('TDM Systems GmbH'), ('TDM Systems GmbH'), 'HarmonyWare STEP v2.0.2.9', 'TDM', '');
FILE_SCHEMA (('CONFIG_CONTROL_DESIGN'));
ENDSEC;

DATA;
#10 = CARTESIAN_POINT ('', (30., 7.88268590218009, -39.5));
#20 = VERTEX_POINT ('', #10);
#30 = CARTESIAN_POINT ('', (0., 7.88268590218004, -39.5));
#40 = VERTEX_POINT ('', #30);
#50 = CARTESIAN_POINT ('', (30., 7.88268590218009, -39.5));
#60 = CARTESIAN_POINT ('', (5.6843418860808E-14, 7.88268590218009, -39.5));
#70 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#50, #60), .UNSPECIFIED., .F., .U., (2, 2), (0.400000000000002, 1.), .UNSPECIFIED.);
#80 = EDGE_CURVE ('', #20, #40, #70, .T.);
#90 = ORIENTED_EDGE ('', *, *, #80, .T.);
#100 = CARTESIAN_POINT ('', (0., 42.5, -39.5));
#110 = VERTEX_POINT ('', #100);
#120 = CARTESIAN_POINT ('', (0., 7.88268590218003, -39.5));
#130 = CARTESIAN_POINT ('', (0., 42.5, -39.5));
#140 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#120, #130), .UNSPECIFIED., .F., .U., (2, 2), (0.592737481202118, 1.), .UNSPECIFIED.);
#150 = EDGE_CURVE ('', #40, #110, #140, .T.);
#160 = ORIENTED_EDGE ('', *, *, #150, .T.);
#170 = CARTESIAN_POINT ('', (30., 42.5, -39.5));
#180 = VERTEX_POINT ('', #170);
#190 = CARTESIAN_POINT ('', (-1.4210854715202E-14, 42.5, -39.5));
#200 = CARTESIAN_POINT ('', (30., 42.5, -39.5));
#210 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#190, #200), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.6), .UNSPECIFIED.);
#220 = EDGE_CURVE ('', #110, #180, #210, .T.);
#230 = ORIENTED_EDGE ('', *, *, #220, .T.);
#240 = CARTESIAN_POINT ('', (30., 7.88268590218009, -39.5));
#250 = CARTESIAN_POINT ('', (30., 42.5, -39.5));
#260 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#240, #250), .UNSPECIFIED., .F., .U., (2, 2), (0.592737481202119, 1.), .UNSPECIFIED.);
#270 = EDGE_CURVE ('', #20, #180, #260, .T.);
#280 = ORIENTED_EDGE ('', *, *, #270, .F.);
#290 = EDGE_LOOP ('', (#90, #160, #230, #280));
#300 = FACE_OUTER_BOUND ('', #290, .T.);
#310 = CARTESIAN_POINT ('', (30., 7.88268590218001, -39.5));
#320 = CARTESIAN_POINT ('', (30., 42.5, -39.5));
#330 = CARTESIAN_POINT ('', (1.4210854715202E-14, 7.88268590218001, -39.5));
#340 = CARTESIAN_POINT ('', (1.4210854715202E-14, 42.5, -39.5));
#350 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#310, #320), (#330, #340)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.34871812830221, 0.65128187169779), (0.579500498485838, 0.928631969810404), .UNSPECIFIED.);
#360 = ADVANCED_FACE ('', (#300), #350, .T.);
#370 = ORIENTED_EDGE ('', *, *, #150, .F.);
#380 = CARTESIAN_POINT ('', (0., -42.5, -26.));
#390 = VERTEX_POINT ('', #380);
#400 = CARTESIAN_POINT ('', (0., -42.5, -26.));
#410 = CARTESIAN_POINT ('', (0., 7.88268590218004, -39.5));
#420 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#400, #410), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.818181818181818), .UNSPECIFIED.);
#430 = EDGE_CURVE ('', #390, #40, #420, .T.);
#440 = ORIENTED_EDGE ('', *, *, #430, .F.);
#450 = CARTESIAN_POINT ('', (0., -42.5, 32.5));
#460 = VERTEX_POINT ('', #450);
#470 = CARTESIAN_POINT ('', (0., -42.5, -26.));
#480 = CARTESIAN_POINT ('', (0., -42.5, 32.5));
#490 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#470, #480), .UNSPECIFIED., .F., .U., (2, 2), (16.5, 75.), .UNSPECIFIED.);
#500 = EDGE_CURVE ('', #390, #460, #490, .T.);
#510 = ORIENTED_EDGE ('', *, *, #500, .T.);
#520 = CARTESIAN_POINT ('', (0., 42.5, 32.5));
#530 = VERTEX_POINT ('', #520);
#540 = CARTESIAN_POINT ('', (0., -42.5, 32.5));
#550 = CARTESIAN_POINT ('', (0., 42.5, 32.5));
#560 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#540, #550), .UNSPECIFIED., .F., .U., (2, 2), (0., 85.), .UNSPECIFIED.);
#570 = EDGE_CURVE ('', #460, #530, #560, .T.);
#580 = ORIENTED_EDGE ('', *, *, #570, .T.);
#590 = CARTESIAN_POINT ('', (0., 42.5, -39.5));
#600 = CARTESIAN_POINT ('', (0., 42.5, 32.5));
#610 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#590, #600), .UNSPECIFIED., .F., .U., (2, 2), (3., 75.), .UNSPECIFIED.);
#620 = EDGE_CURVE ('', #110, #530, #610, .T.);
#630 = ORIENTED_EDGE ('', *, *, #620, .F.);
#640 = EDGE_LOOP ('', (#370, #440, #510, #580, #630));
#650 = FACE_OUTER_BOUND ('', #640, .T.);
#660 = CARTESIAN_POINT ('', (0., 20., 0.));
#670 = VERTEX_POINT ('', #660);
#680 = CARTESIAN_POINT ('', (0., 20., 0.));
#690 = CARTESIAN_POINT ('', (0., 20., 20.));
#700 = CARTESIAN_POINT ('', (0., 1.22464679914735E-15, 20.));
#710 = CARTESIAN_POINT ('', (0., -20., 20.));
#720 = CARTESIAN_POINT ('', (0., -20., 2.44929359829471E-15));
#730 = CARTESIAN_POINT ('', (0., -20., -20.));
#740 = CARTESIAN_POINT ('', (0., -3.67394039744206E-15, -20.));
#750 = CARTESIAN_POINT ('', (0., 20., -20.));
#760 = CARTESIAN_POINT ('', (0., 20., 0.));
#770 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#680, #690, #700, #710, #720, #730, #740, #750, #760), .UNSPECIFIED., .T., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 2, 3), (0., 0.25, 0.5, 0.75, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#780 = EDGE_CURVE ('', #670, #670, #770, .T.);
#790 = ORIENTED_EDGE ('', *, *, #780, .T.);
#800 = EDGE_LOOP ('', (#790));
#810 = FACE_BOUND ('', #800, .T.);
#820 = CARTESIAN_POINT ('', (0., -42.5, -39.5));
#830 = CARTESIAN_POINT ('', (0., 42.5, -39.5));
#840 = CARTESIAN_POINT ('', (0., -42.5, 32.5));
#850 = CARTESIAN_POINT ('', (0., 42.5, 32.5));
#860 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#820, #830), (#840, #850)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (3., 75.), (0., 85.), .UNSPECIFIED.);
#870 = ADVANCED_FACE ('', (#650, #810), #860, .T.);
#880 = CARTESIAN_POINT ('', (30., 19.0788383248868, -42.5));
#890 = VERTEX_POINT ('', #880);
#900 = CARTESIAN_POINT ('', (30., 19.0788383248868, -42.5));
#910 = CARTESIAN_POINT ('', (30., 7.8826859021801, -39.5));
#920 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#900, #910), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#930 = EDGE_CURVE ('', #890, #20, #920, .T.);
#940 = ORIENTED_EDGE ('', *, *, #930, .F.);
#950 = CARTESIAN_POINT ('', (50., 19.0788383248867, -42.5));
#960 = VERTEX_POINT ('', #950);
#970 = CARTESIAN_POINT ('', (30., 19.0788383248868, -42.5));
#980 = CARTESIAN_POINT ('', (49.9999999999999, 19.0788383248868, -42.5));
#990 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#970, #980), .UNSPECIFIED., .F., .U., (2, 2), (0.600000000000001, 1.), .UNSPECIFIED.);
#1000 = EDGE_CURVE ('', #890, #960, #990, .T.);
#1010 = ORIENTED_EDGE ('', *, *, #1000, .T.);
#1020 = CARTESIAN_POINT ('', (50., -42.5, -26.));
#1030 = VERTEX_POINT ('', #1020);
#1040 = CARTESIAN_POINT ('', (50., 19.0788383248867, -42.5));
#1050 = CARTESIAN_POINT ('', (50., -42.5000000000001, -26.));
#1060 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1040, #1050), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1070 = EDGE_CURVE ('', #960, #1030, #1060, .T.);
#1080 = ORIENTED_EDGE ('', *, *, #1070, .T.);
#1090 = CARTESIAN_POINT ('', (50., -42.5, -26.));
#1100 = CARTESIAN_POINT ('', (0., -42.5, -26.));
#1110 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1090, #1100), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1120 = EDGE_CURVE ('', #1030, #390, #1110, .T.);
#1130 = ORIENTED_EDGE ('', *, *, #1120, .T.);
#1140 = ORIENTED_EDGE ('', *, *, #430, .T.);
#1150 = ORIENTED_EDGE ('', *, *, #80, .F.);
#1160 = EDGE_LOOP ('', (#940, #1010, #1080, #1130, #1140, #1150));
#1170 = FACE_OUTER_BOUND ('', #1160, .T.);
#1180 = CARTESIAN_POINT ('', (50.0000000000001, 19.0788383248868, -42.5));
#1190 = CARTESIAN_POINT ('', (0., 19.0788383248868, -42.5));
#1200 = CARTESIAN_POINT ('', (50.0000000000001, -42.5000000000001, -26.));
#1210 = CARTESIAN_POINT ('', (0., -42.5000000000001, -26.));
#1220 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1180, #1190), (#1200, #1210)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (74.9940846400784, 138.745189175157), (115.45745015515, 165.45745015515), .UNSPECIFIED.);
#1230 = ADVANCED_FACE ('', (#1170), #1220, .T.);
#1240 = CARTESIAN_POINT ('', (30., 42.5, -42.5));
#1250 = VERTEX_POINT ('', #1240);
#1260 = CARTESIAN_POINT ('', (30., 19.0788383248868, -42.5));
#1270 = CARTESIAN_POINT ('', (30., 42.5, -42.5));
#1280 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1260, #1270), .UNSPECIFIED., .F., .U., (2, 2), (0.724456921469256, 1.), .UNSPECIFIED.);
#1290 = EDGE_CURVE ('', #890, #1250, #1280, .T.);
#1300 = ORIENTED_EDGE ('', *, *, #1290, .T.);
#1310 = CARTESIAN_POINT ('', (50., 42.5, -42.5));
#1320 = VERTEX_POINT ('', #1310);
#1330 = CARTESIAN_POINT ('', (30., 42.5, -42.5));
#1340 = CARTESIAN_POINT ('', (50., 42.5, -42.5));
#1350 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1330, #1340), .UNSPECIFIED., .F., .U., (2, 2), (30., 50.), .UNSPECIFIED.);
#1360 = EDGE_CURVE ('', #1250, #1320, #1350, .T.);
#1370 = ORIENTED_EDGE ('', *, *, #1360, .T.);
#1380 = CARTESIAN_POINT ('', (50., 19.0788383248867, -42.5));
#1390 = CARTESIAN_POINT ('', (50., 42.5, -42.5));
#1400 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1380, #1390), .UNSPECIFIED., .F., .U., (2, 2), (61.5788383248867, 85.), .UNSPECIFIED.);
#1410 = EDGE_CURVE ('', #960, #1320, #1400, .T.);
#1420 = ORIENTED_EDGE ('', *, *, #1410, .F.);
#1430 = ORIENTED_EDGE ('', *, *, #1000, .F.);
#1440 = EDGE_LOOP ('', (#1300, #1370, #1420, #1430));
#1450 = FACE_OUTER_BOUND ('', #1440, .T.);
#1460 = CARTESIAN_POINT ('', (30., 19.0788383248867, -42.5));
#1470 = CARTESIAN_POINT ('', (50., 19.0788383248867, -42.5));
#1480 = CARTESIAN_POINT ('', (30., 42.5, -42.5));
#1490 = CARTESIAN_POINT ('', (50., 42.5, -42.5));
#1500 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1460, #1470), (#1480, #1490)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (61.5788383248867, 85.), (30., 50.), .UNSPECIFIED.);
#1510 = ADVANCED_FACE ('', (#1450), #1500, .T.);
#1520 = CARTESIAN_POINT ('', (30., 42.5, -42.5));
#1530 = CARTESIAN_POINT ('', (30., 42.5, -39.5));
#1540 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1520, #1530), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1550 = EDGE_CURVE ('', #1250, #180, #1540, .T.);
#1560 = ORIENTED_EDGE ('', *, *, #1550, .T.);
#1570 = ORIENTED_EDGE ('', *, *, #220, .F.);
#1580 = ORIENTED_EDGE ('', *, *, #620, .T.);
#1590 = CARTESIAN_POINT ('', (50., 42.5, 32.5));
#1600 = VERTEX_POINT ('', #1590);
#1610 = CARTESIAN_POINT ('', (0., 42.5, 32.5));
#1620 = CARTESIAN_POINT ('', (50., 42.5, 32.5));
#1630 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1610, #1620), .UNSPECIFIED., .F., .U., (2, 2), (0., 50.), .UNSPECIFIED.);
#1640 = EDGE_CURVE ('', #530, #1600, #1630, .T.);
#1650 = ORIENTED_EDGE ('', *, *, #1640, .T.);
#1660 = CARTESIAN_POINT ('', (50., 42.5, 10.8999999999997));
#1670 = VERTEX_POINT ('', #1660);
#1680 = CARTESIAN_POINT ('', (50., 42.5, 10.8999999999997));
#1690 = CARTESIAN_POINT ('', (50., 42.5, 32.5));
#1700 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1680, #1690), .UNSPECIFIED., .F., .U., (2, 2), (53.3999999999997, 75.), .UNSPECIFIED.);
#1710 = EDGE_CURVE ('', #1670, #1600, #1700, .T.);
#1720 = ORIENTED_EDGE ('', *, *, #1710, .F.);
#1730 = CARTESIAN_POINT ('', (42., 42.5, 13.0435935394487));
#1740 = VERTEX_POINT ('', #1730);
#1750 = CARTESIAN_POINT ('', (42., 42.5, 13.0435935394487));
#1760 = CARTESIAN_POINT ('', (50., 42.5, 10.8999999999997));
#1770 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1750, #1760), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1780 = EDGE_CURVE ('', #1740, #1670, #1770, .T.);
#1790 = ORIENTED_EDGE ('', *, *, #1780, .F.);
#1800 = CARTESIAN_POINT ('', (42., 42.4999999999999, -23.2435935394493));
#1810 = VERTEX_POINT ('', #1800);
#1820 = CARTESIAN_POINT ('', (42., 42.4999999999999, -23.2435935394493));
#1830 = CARTESIAN_POINT ('', (42., 42.5, 13.0435935394487));
#1840 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1820, #1830), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1850 = EDGE_CURVE ('', #1810, #1740, #1840, .T.);
#1860 = ORIENTED_EDGE ('', *, *, #1850, .F.);
#1870 = CARTESIAN_POINT ('', (50., 42.5, -21.1000000000003));
#1880 = VERTEX_POINT ('', #1870);
#1890 = CARTESIAN_POINT ('', (50., 42.4999999999999, -21.1000000000003));
#1900 = CARTESIAN_POINT ('', (42., 42.4999999999999, -23.2435935394493));
#1910 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1890, #1900), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1920 = EDGE_CURVE ('', #1880, #1810, #1910, .T.);
#1930 = ORIENTED_EDGE ('', *, *, #1920, .F.);
#1940 = CARTESIAN_POINT ('', (50., 42.5, -42.5));
#1950 = CARTESIAN_POINT ('', (50., 42.5, -21.1000000000003));
#1960 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1940, #1950), .UNSPECIFIED., .F., .U., (2, 2), (0., 21.3999999999997), .UNSPECIFIED.);
#1970 = EDGE_CURVE ('', #1320, #1880, #1960, .T.);
#1980 = ORIENTED_EDGE ('', *, *, #1970, .F.);
#1990 = ORIENTED_EDGE ('', *, *, #1360, .F.);
#2000 = EDGE_LOOP ('', (#1560, #1570, #1580, #1650, #1720, #1790, #1860, #1930, #1980, #1990));
#2010 = FACE_OUTER_BOUND ('', #2000, .T.);
#2020 = CARTESIAN_POINT ('', (0., 42.5, -42.5));
#2030 = CARTESIAN_POINT ('', (50., 42.5, -42.5));
#2040 = CARTESIAN_POINT ('', (0., 42.5, 32.5));
#2050 = CARTESIAN_POINT ('', (50., 42.5, 32.5));
#2060 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2020, #2030), (#2040, #2050)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 75.), (0., 50.), .UNSPECIFIED.);
#2070 = ADVANCED_FACE ('', (#2010), #2060, .T.);
#2080 = ORIENTED_EDGE ('', *, *, #570, .F.);
#2090 = CARTESIAN_POINT ('', (50., -42.5, 32.5));
#2100 = VERTEX_POINT ('', #2090);
#2110 = CARTESIAN_POINT ('', (0., -42.5, 32.5));
#2120 = CARTESIAN_POINT ('', (50., -42.5, 32.5));
#2130 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2110, #2120), .UNSPECIFIED., .F., .U., (2, 2), (0., 50.), .UNSPECIFIED.);
#2140 = EDGE_CURVE ('', #460, #2100, #2130, .T.);
#2150 = ORIENTED_EDGE ('', *, *, #2140, .T.);
#2160 = CARTESIAN_POINT ('', (50., -42.5, 32.5));
#2170 = CARTESIAN_POINT ('', (50., 42.5, 32.5));
#2180 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2160, #2170), .UNSPECIFIED., .F., .U., (2, 2), (0., 85.), .UNSPECIFIED.);
#2190 = EDGE_CURVE ('', #2100, #1600, #2180, .T.);
#2200 = ORIENTED_EDGE ('', *, *, #2190, .T.);
#2210 = ORIENTED_EDGE ('', *, *, #1640, .F.);
#2220 = EDGE_LOOP ('', (#2080, #2150, #2200, #2210));
#2230 = FACE_OUTER_BOUND ('', #2220, .T.);
#2240 = CARTESIAN_POINT ('', (0., -42.5, 32.5));
#2250 = CARTESIAN_POINT ('', (0., 42.5, 32.5));
#2260 = CARTESIAN_POINT ('', (50., -42.5, 32.5));
#2270 = CARTESIAN_POINT ('', (50., 42.5, 32.5));
#2280 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2240, #2250), (#2260, #2270)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 50.), (0., 85.), .UNSPECIFIED.);
#2290 = ADVANCED_FACE ('', (#2230), #2280, .T.);
#2300 = ORIENTED_EDGE ('', *, *, #1120, .F.);
#2310 = CARTESIAN_POINT ('', (50., -42.5, -21.1));
#2320 = VERTEX_POINT ('', #2310);
#2330 = CARTESIAN_POINT ('', (50., -42.5, -26.));
#2340 = CARTESIAN_POINT ('', (50., -42.5, -21.1));
#2350 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2330, #2340), .UNSPECIFIED., .F., .U., (2, 2), (16.5, 21.4), .UNSPECIFIED.);
#2360 = EDGE_CURVE ('', #1030, #2320, #2350, .T.);
#2370 = ORIENTED_EDGE ('', *, *, #2360, .T.);
#2380 = CARTESIAN_POINT ('', (42., -42.5000000000001, -23.243593539449));
#2390 = VERTEX_POINT ('', #2380);
#2400 = CARTESIAN_POINT ('', (50., -42.5000000000001, -21.1));
#2410 = CARTESIAN_POINT ('', (42., -42.5000000000001, -23.243593539449));
#2420 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2400, #2410), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2430 = EDGE_CURVE ('', #2320, #2390, #2420, .T.);
#2440 = ORIENTED_EDGE ('', *, *, #2430, .T.);
#2450 = CARTESIAN_POINT ('', (42., -42.5, 13.043593539449));
#2460 = VERTEX_POINT ('', #2450);
#2470 = CARTESIAN_POINT ('', (42., -42.5000000000001, -23.243593539449));
#2480 = CARTESIAN_POINT ('', (42., -42.5, 13.043593539449));
#2490 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2470, #2480), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2500 = EDGE_CURVE ('', #2390, #2460, #2490, .T.);
#2510 = ORIENTED_EDGE ('', *, *, #2500, .T.);
#2520 = CARTESIAN_POINT ('', (50., -42.5, 10.9));
#2530 = VERTEX_POINT ('', #2520);
#2540 = CARTESIAN_POINT ('', (42., -42.5, 13.043593539449));
#2550 = CARTESIAN_POINT ('', (50., -42.5, 10.9));
#2560 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2540, #2550), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2570 = EDGE_CURVE ('', #2460, #2530, #2560, .T.);
#2580 = ORIENTED_EDGE ('', *, *, #2570, .T.);
#2590 = CARTESIAN_POINT ('', (50., -42.5, 10.9));
#2600 = CARTESIAN_POINT ('', (50., -42.5, 32.5));
#2610 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2590, #2600), .UNSPECIFIED., .F., .U., (2, 2), (53.4, 75.), .UNSPECIFIED.);
#2620 = EDGE_CURVE ('', #2530, #2100, #2610, .T.);
#2630 = ORIENTED_EDGE ('', *, *, #2620, .T.);
#2640 = ORIENTED_EDGE ('', *, *, #2140, .F.);
#2650 = ORIENTED_EDGE ('', *, *, #500, .F.);
#2660 = EDGE_LOOP ('', (#2300, #2370, #2440, #2510, #2580, #2630, #2640, #2650));
#2670 = FACE_OUTER_BOUND ('', #2660, .T.);
#2680 = CARTESIAN_POINT ('', (0., -42.5, -26.));
#2690 = CARTESIAN_POINT ('', (0., -42.5, 32.5));
#2700 = CARTESIAN_POINT ('', (50., -42.5, -26.));
#2710 = CARTESIAN_POINT ('', (50., -42.5, 32.5));
#2720 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2680, #2690), (#2700, #2710)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 50.), (16.5, 75.), .UNSPECIFIED.);
#2730 = ADVANCED_FACE ('', (#2670), #2720, .T.);
#2740 = ORIENTED_EDGE ('', *, *, #1070, .F.);
#2750 = ORIENTED_EDGE ('', *, *, #1410, .T.);
#2760 = ORIENTED_EDGE ('', *, *, #1970, .T.);
#2770 = CARTESIAN_POINT ('', (50., -42.5, -21.1));
#2780 = CARTESIAN_POINT ('', (50., 42.4999999999999, -21.1000000000003));
#2790 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2770, #2780), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2800 = EDGE_CURVE ('', #2320, #1880, #2790, .T.);
#2810 = ORIENTED_EDGE ('', *, *, #2800, .F.);
#2820 = ORIENTED_EDGE ('', *, *, #2360, .F.);
#2830 = EDGE_LOOP ('', (#2740, #2750, #2760, #2810, #2820));
#2840 = FACE_OUTER_BOUND ('', #2830, .T.);
#2850 = CARTESIAN_POINT ('', (50., -42.5, -42.5));
#2860 = CARTESIAN_POINT ('', (50., -42.5, 32.5));
#2870 = CARTESIAN_POINT ('', (50., 42.5, -42.5));
#2880 = CARTESIAN_POINT ('', (50., 42.5, 32.5));
#2890 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2850, #2860), (#2870, #2880)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 85.), (0., 75.), .UNSPECIFIED.);
#2900 = ADVANCED_FACE ('', (#2840), #2890, .T.);
#2910 = ORIENTED_EDGE ('', *, *, #2800, .T.);
#2920 = ORIENTED_EDGE ('', *, *, #1920, .T.);
#2930 = CARTESIAN_POINT ('', (42., -42.5000000000001, -23.243593539449));
#2940 = CARTESIAN_POINT ('', (42., 42.4999999999999, -23.2435935394493));
#2950 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2930, #2940), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2960 = EDGE_CURVE ('', #2390, #1810, #2950, .T.);
#2970 = ORIENTED_EDGE ('', *, *, #2960, .F.);
#2980 = ORIENTED_EDGE ('', *, *, #2430, .F.);
#2990 = EDGE_LOOP ('', (#2910, #2920, #2970, #2980));
#3000 = FACE_OUTER_BOUND ('', #2990, .T.);
#3010 = CARTESIAN_POINT ('', (50., -42.5000000000001, -21.1));
#3020 = CARTESIAN_POINT ('', (42., -42.5000000000001, -23.243593539449));
#3030 = CARTESIAN_POINT ('', (50., 42.4999999999999, -21.1000000000003));
#3040 = CARTESIAN_POINT ('', (42., 42.4999999999999, -23.2435935394493));
#3050 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3010, #3020), (#3030, #3040)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#3060 = ADVANCED_FACE ('', (#3000), #3050, .T.);
#3070 = ORIENTED_EDGE ('', *, *, #2960, .T.);
#3080 = ORIENTED_EDGE ('', *, *, #1850, .T.);
#3090 = CARTESIAN_POINT ('', (42., -42.5, 13.043593539449));
#3100 = CARTESIAN_POINT ('', (42., 42.5, 13.0435935394487));
#3110 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3090, #3100), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3120 = EDGE_CURVE ('', #2460, #1740, #3110, .T.);
#3130 = ORIENTED_EDGE ('', *, *, #3120, .F.);
#3140 = ORIENTED_EDGE ('', *, *, #2500, .F.);
#3150 = EDGE_LOOP ('', (#3070, #3080, #3130, #3140));
#3160 = FACE_OUTER_BOUND ('', #3150, .T.);
#3170 = CARTESIAN_POINT ('', (42., -42.5000000000001, -23.243593539449));
#3180 = CARTESIAN_POINT ('', (42., -42.5, 13.043593539449));
#3190 = CARTESIAN_POINT ('', (42., 42.4999999999999, -23.2435935394493));
#3200 = CARTESIAN_POINT ('', (42., 42.5, 13.0435935394487));
#3210 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3170, #3180), (#3190, #3200)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#3220 = ADVANCED_FACE ('', (#3160), #3210, .T.);
#3230 = ORIENTED_EDGE ('', *, *, #3120, .T.);
#3240 = ORIENTED_EDGE ('', *, *, #1780, .T.);
#3250 = CARTESIAN_POINT ('', (50., -42.5, 10.9));
#3260 = CARTESIAN_POINT ('', (50., 42.5, 10.8999999999997));
#3270 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3250, #3260), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3280 = EDGE_CURVE ('', #2530, #1670, #3270, .T.);
#3290 = ORIENTED_EDGE ('', *, *, #3280, .F.);
#3300 = ORIENTED_EDGE ('', *, *, #2570, .F.);
#3310 = EDGE_LOOP ('', (#3230, #3240, #3290, #3300));
#3320 = FACE_OUTER_BOUND ('', #3310, .T.);
#3330 = CARTESIAN_POINT ('', (42., -42.5, 13.043593539449));
#3340 = CARTESIAN_POINT ('', (50., -42.5, 10.9));
#3350 = CARTESIAN_POINT ('', (42., 42.5, 13.0435935394487));
#3360 = CARTESIAN_POINT ('', (50., 42.5, 10.8999999999997));
#3370 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3330, #3340), (#3350, #3360)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#3380 = ADVANCED_FACE ('', (#3320), #3370, .T.);
#3390 = ORIENTED_EDGE ('', *, *, #3280, .T.);
#3400 = ORIENTED_EDGE ('', *, *, #1710, .T.);
#3410 = ORIENTED_EDGE ('', *, *, #2190, .F.);
#3420 = ORIENTED_EDGE ('', *, *, #2620, .F.);
#3430 = EDGE_LOOP ('', (#3390, #3400, #3410, #3420));
#3440 = FACE_OUTER_BOUND ('', #3430, .T.);
#3450 = CARTESIAN_POINT ('', (50., -42.5, -42.5));
#3460 = CARTESIAN_POINT ('', (50., -42.5, 32.5));
#3470 = CARTESIAN_POINT ('', (50., 42.5, -42.5));
#3480 = CARTESIAN_POINT ('', (50., 42.5, 32.5));
#3490 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3450, #3460), (#3470, #3480)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 85.), (0., 75.), .UNSPECIFIED.);
#3500 = ADVANCED_FACE ('', (#3440), #3490, .T.);
#3510 = ORIENTED_EDGE ('', *, *, #930, .T.);
#3520 = ORIENTED_EDGE ('', *, *, #270, .T.);
#3530 = ORIENTED_EDGE ('', *, *, #1550, .F.);
#3540 = ORIENTED_EDGE ('', *, *, #1290, .F.);
#3550 = EDGE_LOOP ('', (#3510, #3520, #3530, #3540));
#3560 = FACE_OUTER_BOUND ('', #3550, .T.);
#3570 = CARTESIAN_POINT ('', (30., 7.88268590218008, -42.5));
#3580 = CARTESIAN_POINT ('', (30., 42.5, -42.5));
#3590 = CARTESIAN_POINT ('', (30., 7.88268590218008, -39.5));
#3600 = CARTESIAN_POINT ('', (30., 42.5, -39.5));
#3610 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3570, #3580), (#3590, #3600)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0.592737481202119, 1.), .UNSPECIFIED.);
#3620 = ADVANCED_FACE ('', (#3560), #3610, .T.);
#3630 = CARTESIAN_POINT ('', (-63., 20., 0.));
#3640 = VERTEX_POINT ('', #3630);
#3650 = CARTESIAN_POINT ('', (-63., 20., 0.));
#3660 = CARTESIAN_POINT ('', (-63., 20., 20.));
#3670 = CARTESIAN_POINT ('', (-63., 1.22464679914735E-15, 20.));
#3680 = CARTESIAN_POINT ('', (-63., -20., 20.));
#3690 = CARTESIAN_POINT ('', (-63., -20., 2.44929359829471E-15));
#3700 = CARTESIAN_POINT ('', (-63., -20., -20.));
#3710 = CARTESIAN_POINT ('', (-63., -3.67394039744206E-15, -20.));
#3720 = CARTESIAN_POINT ('', (-63., 20., -20.));
#3730 = CARTESIAN_POINT ('', (-63., 20., 0.));
#3740 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#3650, #3660, #3670, #3680, #3690, #3700, #3710, #3720, #3730), .UNSPECIFIED., .T., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 2, 3), (0., 0.25, 0.5, 0.75, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#3750 = EDGE_CURVE ('', #3640, #3640, #3740, .T.);
#3760 = ORIENTED_EDGE ('', *, *, #3750, .F.);
#3770 = EDGE_LOOP ('', (#3760));
#3780 = FACE_OUTER_BOUND ('', #3770, .T.);
#3790 = CARTESIAN_POINT ('', (-63., -20., -20.));
#3800 = CARTESIAN_POINT ('', (-63., 20., -20.));
#3810 = CARTESIAN_POINT ('', (-63., -20., 20.));
#3820 = CARTESIAN_POINT ('', (-63., 20., 20.));
#3830 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3790, #3800), (#3810, #3820)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.178587826733388, 0.821412173266612), (0.178587826733387, 0.821412173266612), .UNSPECIFIED.);
#3840 = ADVANCED_FACE ('', (#3780), #3830, .T.);
#3850 = CARTESIAN_POINT ('', (-63., 20., 0.));
#3860 = CARTESIAN_POINT ('', (0., 20., 0.));
#3870 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3850, #3860), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3880 = EDGE_CURVE ('', #3640, #670, #3870, .T.);
#3890 = ORIENTED_EDGE ('', *, *, #3880, .F.);
#3900 = ORIENTED_EDGE ('', *, *, #3750, .T.);
#3910 = ORIENTED_EDGE ('', *, *, #3880, .T.);
#3920 = ORIENTED_EDGE ('', *, *, #780, .F.);
#3930 = EDGE_LOOP ('', (#3890, #3900, #3910, #3920));
#3940 = FACE_OUTER_BOUND ('', #3930, .T.);
#3950 = CARTESIAN_POINT ('', (-63., 20., 0.));
#3960 = CARTESIAN_POINT ('', (0., 20., 0.));
#3970 = CARTESIAN_POINT ('', (-63., 20., 20.));
#3980 = CARTESIAN_POINT ('', (0., 20., 20.));
#3990 = CARTESIAN_POINT ('', (-63., 1.22464679914735E-15, 20.));
#4000 = CARTESIAN_POINT ('', (0., 1.22464679914735E-15, 20.));
#4010 = CARTESIAN_POINT ('', (-63., -20., 20.));
#4020 = CARTESIAN_POINT ('', (0., -20., 20.));
#4030 = CARTESIAN_POINT ('', (-63., -20., 2.44929359829471E-15));
#4040 = CARTESIAN_POINT ('', (0., -20., 2.44929359829471E-15));
#4050 = CARTESIAN_POINT ('', (-63., -20., -20.));
#4060 = CARTESIAN_POINT ('', (0., -20., -20.));
#4070 = CARTESIAN_POINT ('', (-63., -3.67394039744206E-15, -20.));
#4080 = CARTESIAN_POINT ('', (0., -3.67394039744206E-15, -20.));
#4090 = CARTESIAN_POINT ('', (-63., 20., -20.));
#4100 = CARTESIAN_POINT ('', (0., 20., -20.));
#4110 = CARTESIAN_POINT ('', (-63., 20., 0.));
#4120 = CARTESIAN_POINT ('', (0., 20., 0.));
#4130 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#3950, #3960), (#3970, #3980), (#3990, #4000), (#4010, #4020), (#4030, #4040), (#4050, #4060), (#4070, #4080), (#4090, #4100), (#4110, #4120)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 31.4159265358979, 62.8318530717959, 94.2477796076938, 125.663706143592), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#4140 = ADVANCED_FACE ('', (#3940), #4130, .T.);
#4150 = CLOSED_SHELL ('', (#360, #870, #1230, #1510, #2070, #2290, #2730, #2900, #3060, #3220, #3380, #3500, #3620, #3840, #4140));
#4160 = MANIFOLD_SOLID_BREP ('NOCUT', #4150);
#4170 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#4180 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#4190 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#4200 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #4170, 'DISTANCE_ACCURACY_VALUE', '');
#4210 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#4200))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#4170, #4180, #4190))
   REPRESENTATION_CONTEXT ('', '3D')
);
#4220 = COLOUR_RGB ('', 0.75294117647059, 0.75294117647059, 0.75294117647059);
#4230 = FILL_AREA_STYLE_COLOUR ('', #4220);
#4240 = FILL_AREA_STYLE ('', (#4230));
#4250 = SURFACE_STYLE_FILL_AREA (#4240);
#4260 = SURFACE_SIDE_STYLE ('', (#4250));
#4270 = SURFACE_STYLE_USAGE (.POSITIVE., #4260);
#4280 = PRESENTATION_STYLE_ASSIGNMENT ((#4270));
#4290 = STYLED_ITEM ('', (#4280), #4160);
#4300 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#4160), #4210);
#4310 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#4320 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #4310);
#4330 = MECHANICAL_CONTEXT ('', #4310, 'mechanical');
#4340 = PRODUCT ('NONE', '', '', (#4330));
#4350 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#4360 = PERSON ('', '', $, $, $, $);
#4370 = ORGANIZATION ($, '', '');
#4380 = PERSON_AND_ORGANIZATION (#4360, #4370);
#4390 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#4380, #4350, (#4340));
#4400 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#4340));
#4410 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #4340, .NOT_KNOWN.);
#4420 = APPROVAL_STATUS ('approved');
#4430 = APPROVAL (#4420, '');
#4440 = CALENDAR_DATE (2017, 3, 8);
#4450 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#4460 = LOCAL_TIME (10, 30, 54., #4450);
#4470 = DATE_AND_TIME (#4440, #4460);
#4480 = APPROVAL_DATE_TIME (#4470, #4430);
#4490 = APPROVAL_ROLE ('');
#4500 = PERSON ('', '', $, $, $, $);
#4510 = ORGANIZATION ($, '', '');
#4520 = PERSON_AND_ORGANIZATION (#4500, #4510);
#4530 = APPROVAL_PERSON_ORGANIZATION (#4520, #4430, #4490);
#4540 = CC_DESIGN_APPROVAL (#4430, (#4410));
#4550 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#4560 = PERSON ('', '', $, $, $, $);
#4570 = ORGANIZATION ($, '', '');
#4580 = PERSON_AND_ORGANIZATION (#4560, #4570);
#4590 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#4580, #4550, (#4410));
#4600 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#4610 = PERSON ('', '', $, $, $, $);
#4620 = ORGANIZATION ($, '', '');
#4630 = PERSON_AND_ORGANIZATION (#4610, #4620);
#4640 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#4630, #4600, (#4410));
#4650 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#4660 = SECURITY_CLASSIFICATION ('', '', #4650);
#4670 = APPROVAL_STATUS ('approved');
#4680 = APPROVAL (#4670, '');
#4690 = CALENDAR_DATE (2017, 3, 8);
#4700 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#4710 = LOCAL_TIME (10, 30, 54., #4700);
#4720 = DATE_AND_TIME (#4690, #4710);
#4730 = APPROVAL_DATE_TIME (#4720, #4680);
#4740 = APPROVAL_ROLE ('');
#4750 = PERSON ('', '', $, $, $, $);
#4760 = ORGANIZATION ($, '', '');
#4770 = PERSON_AND_ORGANIZATION (#4750, #4760);
#4780 = APPROVAL_PERSON_ORGANIZATION (#4770, #4680, #4740);
#4790 = CC_DESIGN_APPROVAL (#4680, (#4660));
#4800 = DATE_TIME_ROLE ('classification_date');
#4810 = CALENDAR_DATE (2017, 3, 8);
#4820 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#4830 = LOCAL_TIME (10, 30, 54., #4820);
#4840 = DATE_AND_TIME (#4810, #4830);
#4850 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#4840, #4800, (#4660));
#4860 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#4870 = PERSON ('', '', $, $, $, $);
#4880 = ORGANIZATION ($, '', '');
#4890 = PERSON_AND_ORGANIZATION (#4870, #4880);
#4900 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#4890, #4860, (#4660));
#4910 = CC_DESIGN_SECURITY_CLASSIFICATION (#4660, (#4410));
#4920 = DESIGN_CONTEXT ('', #4310, 'design');
#4930 = PRODUCT_DEFINITION ('', '', #4410, #4920);
#4940 = APPROVAL_STATUS ('approved');
#4950 = APPROVAL (#4940, '');
#4960 = CALENDAR_DATE (2017, 3, 8);
#4970 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#4980 = LOCAL_TIME (10, 30, 54., #4970);
#4990 = DATE_AND_TIME (#4960, #4980);
#5000 = APPROVAL_DATE_TIME (#4990, #4950);
#5010 = APPROVAL_ROLE ('');
#5020 = PERSON ('', '', $, $, $, $);
#5030 = ORGANIZATION ($, '', '');
#5040 = PERSON_AND_ORGANIZATION (#5020, #5030);
#5050 = APPROVAL_PERSON_ORGANIZATION (#5040, #4950, #5010);
#5060 = CC_DESIGN_APPROVAL (#4950, (#4930));
#5070 = DATE_TIME_ROLE ('creation_date');
#5080 = CALENDAR_DATE (2017, 3, 8);
#5090 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#5100 = LOCAL_TIME (10, 30, 54., #5090);
#5110 = DATE_AND_TIME (#5080, #5100);
#5120 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#5110, #5070, (#4930));
#5130 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#5140 = PERSON ('', '', $, $, $, $);
#5150 = ORGANIZATION ($, '', '');
#5160 = PERSON_AND_ORGANIZATION (#5140, #5150);
#5170 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#5160, #5130, (#4930));
#5180 = PRODUCT_DEFINITION_SHAPE ('', '', #4930);
#5190 = SHAPE_DEFINITION_REPRESENTATION (#5180, #4300);
ENDSEC;
END-ISO-10303-21;