ISO-10303-21;
HEADER;
FILE_DESCRIPTION ((), '1');
FILE_NAME ('71616-3R.stp', '2018-04-17T15:28:35', ('TDM Systems GmbH'), ('TDM Systems GmbH'), 'HarmonyWare STEP v2.0.6.4', 'TDM', '');
FILE_SCHEMA (('CONFIG_CONTROL_DESIGN'));
ENDSEC;

DATA;
#1 = CARTESIAN_POINT ('', (9.15000000000001, -0.999999999999999, 0.));
#2 = VERTEX_POINT ('', #1);
#3 = CARTESIAN_POINT ('', (5.85000000000001, -0.999999999999999, 0.));
#4 = VERTEX_POINT ('', #3);
#5 = CARTESIAN_POINT ('', (9.15000000000001, -0.999999999999999, 0.));
#6 = CARTESIAN_POINT ('', (9.15000000000001, -2.65, 0.));
#7 = CARTESIAN_POINT ('', (7.50000000000001, -2.65, 0.));
#8 = CARTESIAN_POINT ('', (5.85000000000001, -2.65, 0.));
#9 = CARTESIAN_POINT ('', (5.85000000000001, -0.999999999999999, 0.));
#10 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5, #6, #7, #8, #9), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 90., 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#11 = EDGE_CURVE ('', #2, #4, #10, .T.);
#12 = ORIENTED_EDGE ('', *, *, #11, .T.);
#13 = CARTESIAN_POINT ('', (5.85000000000001, -0.999999999999998, 15.5286796564404));
#14 = VERTEX_POINT ('', #13);
#15 = CARTESIAN_POINT ('', (5.85000000000001, -0.999999999999999, 0.));
#16 = CARTESIAN_POINT ('', (5.85000000000001, -0.999999999999998, 15.5286796564404));
#17 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#15, #16), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#18 = EDGE_CURVE ('', #4, #14, #17, .T.);
#19 = ORIENTED_EDGE ('', *, *, #18, .T.);
#20 = CARTESIAN_POINT ('', (6.32132034355965, -2.15464898020724, 16.));
#21 = VERTEX_POINT ('', #20);
#22 = CARTESIAN_POINT ('', (5.85000000000001, -0.999999999999998, 15.5286796564404));
#23 = CARTESIAN_POINT ('', (5.85000000000001, -1.43733570905331, 15.5286796564404));
#24 = CARTESIAN_POINT ('', (6.01527838570109, -1.8422376448763, 15.6939580421414));
#25 = CARTESIAN_POINT ('', (6.32132034355965, -2.15464898020724, 16.));
#26 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#22, #23, #24, #25), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (3.14159265358979, 3.91669229911478), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.950558541094929, 0.950558541094929, 1.))
   REPRESENTATION_ITEM ('')
);
#27 = EDGE_CURVE ('', #14, #21, #26, .T.);
#28 = ORIENTED_EDGE ('', *, *, #27, .T.);
#29 = CARTESIAN_POINT ('', (9.15000000000001, -0.999999999999998, 16.));
#30 = VERTEX_POINT ('', #29);
#31 = CARTESIAN_POINT ('', (9.15000000000001, -0.999999999999998, 16.));
#32 = CARTESIAN_POINT ('', (9.15000000000001, -2.10865012936717, 16.));
#33 = CARTESIAN_POINT ('', (8.12356979034966, -2.52763238920995, 16.));
#34 = CARTESIAN_POINT ('', (7.09713958069929, -2.94661464905273, 16.));
#35 = CARTESIAN_POINT ('', (6.32132034355965, -2.15464898020724, 16.));
#36 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#31, #32, #33, #34, #35), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 67.7950308046662, 135.590061609332), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.830036470602464, 1., 0.830036470602464, 1.))
   REPRESENTATION_ITEM ('')
);
#37 = EDGE_CURVE ('', #30, #21, #36, .T.);
#38 = ORIENTED_EDGE ('', *, *, #37, .F.);
#39 = CARTESIAN_POINT ('', (9.15000000000001, -0.999999999999999, 0.));
#40 = CARTESIAN_POINT ('', (9.15000000000001, -0.999999999999998, 16.));
#41 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#39, #40), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#42 = EDGE_CURVE ('', #2, #30, #41, .T.);
#43 = ORIENTED_EDGE ('', *, *, #42, .F.);
#44 = EDGE_LOOP ('', (#12, #19, #28, #38, #43));
#45 = FACE_OUTER_BOUND ('', #44, .T.);
#46 = CARTESIAN_POINT ('', (9.15000000000001, -0.999999999999999, -1.6012));
#47 = CARTESIAN_POINT ('', (9.15000000000001, -0.999999999999998, 17.6012));
#48 = CARTESIAN_POINT ('', (9.15000000000001, -2.65, -1.6012));
#49 = CARTESIAN_POINT ('', (9.15000000000001, -2.65, 17.6012));
#50 = CARTESIAN_POINT ('', (7.50000000000001, -2.65, -1.6012));
#51 = CARTESIAN_POINT ('', (7.50000000000001, -2.65, 17.6012));
#52 = CARTESIAN_POINT ('', (5.85000000000001, -2.65, -1.6012));
#53 = CARTESIAN_POINT ('', (5.85000000000001, -2.65, 17.6012));
#54 = CARTESIAN_POINT ('', (5.85000000000001, -1., -1.6012));
#55 = CARTESIAN_POINT ('', (5.85000000000001, -0.999999999999999, 17.6012));
#56 = CARTESIAN_POINT ('', (5.85000000000001, 0.649999999999999, -1.6012));
#57 = CARTESIAN_POINT ('', (5.85000000000001, 0.65, 17.6012));
#58 = CARTESIAN_POINT ('', (7.50000000000001, 0.65, -1.6012));
#59 = CARTESIAN_POINT ('', (7.50000000000001, 0.650000000000001, 17.6012));
#60 = CARTESIAN_POINT ('', (9.15000000000001, 0.650000000000001, -1.6012));
#61 = CARTESIAN_POINT ('', (9.15000000000001, 0.650000000000002, 17.6012));
#62 = CARTESIAN_POINT ('', (9.15000000000001, -0.999999999999999, -1.6012));
#63 = CARTESIAN_POINT ('', (9.15000000000001, -0.999999999999998, 17.6012));
#64 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#46, #47), (#48, #49), (#50, #51), (#52, #53), (#54, #55), (#56, #57), (#58, #59), (#60, #61), (#62, #63)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#65 = ADVANCED_FACE ('', (#45), #64, .T.);
#66 = CARTESIAN_POINT ('', (6.32132034355965, 0.154648980207243, 16.));
#67 = VERTEX_POINT ('', #66);
#68 = CARTESIAN_POINT ('', (6.32132034355965, 0.154648980207244, 16.));
#69 = CARTESIAN_POINT ('', (7.09713958069929, 0.946614649052734, 16.));
#70 = CARTESIAN_POINT ('', (8.12356979034965, 0.527632389209953, 16.));
#71 = CARTESIAN_POINT ('', (9.15000000000001, 0.108650129367171, 16.));
#72 = CARTESIAN_POINT ('', (9.15000000000001, -0.999999999999998, 16.));
#73 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#68, #69, #70, #71, #72), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (224.409938390668, 292.204969195334, 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.830036470602464, 1., 0.830036470602464, 1.))
   REPRESENTATION_ITEM ('')
);
#74 = EDGE_CURVE ('', #67, #30, #73, .T.);
#75 = ORIENTED_EDGE ('', *, *, #74, .T.);
#76 = ORIENTED_EDGE ('', *, *, #37, .T.);
#77 = CARTESIAN_POINT ('', (6.32132034355963, -8., 16.));
#78 = VERTEX_POINT ('', #77);
#79 = CARTESIAN_POINT ('', (6.32132034355965, -2.15464898020724, 16.));
#80 = CARTESIAN_POINT ('', (6.32132034355963, -8., 16.));
#81 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#79, #80), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#82 = EDGE_CURVE ('', #21, #78, #81, .T.);
#83 = ORIENTED_EDGE ('', *, *, #82, .T.);
#84 = CARTESIAN_POINT ('', (11.5, -8., 16.));
#85 = VERTEX_POINT ('', #84);
#86 = CARTESIAN_POINT ('', (6.32132034355963, -8., 16.));
#87 = CARTESIAN_POINT ('', (11.5, -8., 16.));
#88 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#86, #87), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#89 = EDGE_CURVE ('', #78, #85, #88, .T.);
#90 = ORIENTED_EDGE ('', *, *, #89, .T.);
#91 = CARTESIAN_POINT ('', (11.5, 2.7, 16.));
#92 = VERTEX_POINT ('', #91);
#93 = CARTESIAN_POINT ('', (11.5, -8., 16.));
#94 = CARTESIAN_POINT ('', (11.5, 2.7, 16.));
#95 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#93, #94), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#96 = EDGE_CURVE ('', #85, #92, #95, .T.);
#97 = ORIENTED_EDGE ('', *, *, #96, .T.);
#98 = CARTESIAN_POINT ('', (6.32132034355965, 2.7, 16.));
#99 = VERTEX_POINT ('', #98);
#100 = CARTESIAN_POINT ('', (11.5, 2.7, 16.));
#101 = CARTESIAN_POINT ('', (6.32132034355965, 2.7, 16.));
#102 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#100, #101), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#103 = EDGE_CURVE ('', #92, #99, #102, .T.);
#104 = ORIENTED_EDGE ('', *, *, #103, .T.);
#105 = CARTESIAN_POINT ('', (6.32132034355965, 2.7, 16.));
#106 = CARTESIAN_POINT ('', (6.32132034355965, 0.154648980207243, 16.));
#107 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#105, #106), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#108 = EDGE_CURVE ('', #99, #67, #107, .T.);
#109 = ORIENTED_EDGE ('', *, *, #108, .T.);
#110 = EDGE_LOOP ('', (#75, #76, #83, #90, #97, #104, #109));
#111 = FACE_OUTER_BOUND ('', #110, .T.);
#112 = CARTESIAN_POINT ('', (6.32032034355964, -8.001, 16.));
#113 = CARTESIAN_POINT ('', (6.32032034355964, 2.70100000000001, 16.));
#114 = CARTESIAN_POINT ('', (11.501, -8.001, 16.));
#115 = CARTESIAN_POINT ('', (11.501, 2.70100000000001, 16.));
#116 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#112, #113), (#114, #115)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (86.3203203435596, 91.501), (-16.001, -5.299), .UNSPECIFIED.);
#117 = ADVANCED_FACE ('', (#111), #116, .T.);
#118 = ORIENTED_EDGE ('', *, *, #108, .F.);
#119 = CARTESIAN_POINT ('', (6.19999999999997, 2.7, 15.8786796564403));
#120 = VERTEX_POINT ('', #119);
#121 = CARTESIAN_POINT ('', (6.32132034355965, 2.7, 16.));
#122 = CARTESIAN_POINT ('', (6.19999999999997, 2.7, 15.8786796564403));
#123 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#121, #122), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#124 = EDGE_CURVE ('', #99, #120, #123, .T.);
#125 = ORIENTED_EDGE ('', *, *, #124, .T.);
#126 = CARTESIAN_POINT ('', (4.5, 3.6464346247147, 14.1786796564403));
#127 = VERTEX_POINT ('', #126);
#128 = CARTESIAN_POINT ('', (6.19999999999997, 2.7, 15.8786796564403));
#129 = CARTESIAN_POINT ('', (5.49181579267113, 2.7, 15.1704954491115));
#130 = CARTESIAN_POINT ('', (4.87305918008278, 3.04447804848519, 14.5517388365231));
#131 = CARTESIAN_POINT ('', (4.5, 3.6464346247147, 14.1786796564403));
#132 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#128, #129, #130, #131), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (1.5707963267949, 2.5867816206097), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.915815128498098, 0.915815128498098, 1.))
   REPRESENTATION_ITEM ('')
);
#133 = EDGE_CURVE ('', #120, #127, #132, .T.);
#134 = ORIENTED_EDGE ('', *, *, #133, .T.);
#135 = CARTESIAN_POINT ('', (4.5, -8., 14.1786796564403));
#136 = VERTEX_POINT ('', #135);
#137 = CARTESIAN_POINT ('', (4.5, 3.6464346247147, 14.1786796564403));
#138 = CARTESIAN_POINT ('', (4.5, -8., 14.1786796564403));
#139 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#137, #138), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#140 = EDGE_CURVE ('', #127, #136, #139, .T.);
#141 = ORIENTED_EDGE ('', *, *, #140, .T.);
#142 = CARTESIAN_POINT ('', (6.32132034355963, -8., 16.));
#143 = CARTESIAN_POINT ('', (4.5, -8., 14.1786796564403));
#144 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#142, #143), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#145 = EDGE_CURVE ('', #78, #136, #144, .T.);
#146 = ORIENTED_EDGE ('', *, *, #145, .F.);
#147 = ORIENTED_EDGE ('', *, *, #82, .F.);
#148 = ORIENTED_EDGE ('', *, *, #27, .F.);
#149 = CARTESIAN_POINT ('', (6.32132034355965, 0.154648980207243, 16.));
#150 = CARTESIAN_POINT ('', (6.01527838570109, -0.1577623551237, 15.6939580421414));
#151 = CARTESIAN_POINT ('', (5.85000000000001, -0.56266429094669, 15.5286796564404));
#152 = CARTESIAN_POINT ('', (5.85000000000001, -0.999999999999998, 15.5286796564404));
#153 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#149, #150, #151, #152), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (2.36649300806481, 3.14159265358979), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.950558541094929, 0.950558541094929, 1.))
   REPRESENTATION_ITEM ('')
);
#154 = EDGE_CURVE ('', #67, #14, #153, .T.);
#155 = ORIENTED_EDGE ('', *, *, #154, .F.);
#156 = EDGE_LOOP ('', (#118, #125, #134, #141, #146, #147, #148, #155));
#157 = FACE_OUTER_BOUND ('', #156, .T.);
#158 = CARTESIAN_POINT ('', (4.499, -8.001, 14.1776796564403));
#159 = CARTESIAN_POINT ('', (4.499, 3.6474346247147, 14.1776796564403));
#160 = CARTESIAN_POINT ('', (6.32232034355964, -8.001, 16.001));
#161 = CARTESIAN_POINT ('', (6.32232034355964, 3.6474346247147, 16.001));
#162 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#158, #159), (#160, #161)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (2.54417019870917, 5.12273455712201), (-13.001, -1.35256537528531), .UNSPECIFIED.);
#163 = ADVANCED_FACE ('', (#157), #162, .T.);
#164 = CARTESIAN_POINT ('', (12.1224402221811, 7.7042135623731, 14.1));
#165 = VERTEX_POINT ('', #164);
#166 = CARTESIAN_POINT ('', (11.5, 8., 14.1));
#167 = VERTEX_POINT ('', #166);
#168 = CARTESIAN_POINT ('', (12.1224402221811, 7.7042135623731, 14.1));
#169 = CARTESIAN_POINT ('', (11.7569357472492, 7.73787310718364, 14.1));
#170 = CARTESIAN_POINT ('', (11.5, 8., 14.1));
#171 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#168, #169, #170), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (275.261565190527, 315.572995999195), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.938759627530807, 1.))
   REPRESENTATION_ITEM ('')
);
#172 = EDGE_CURVE ('', #165, #167, #171, .T.);
#173 = ORIENTED_EDGE ('', *, *, #172, .T.);
#174 = CARTESIAN_POINT ('', (4.19999999999997, 8., 14.1));
#175 = VERTEX_POINT ('', #174);
#176 = CARTESIAN_POINT ('', (4.19999999999997, 8., 14.1));
#177 = CARTESIAN_POINT ('', (11.5, 8., 14.1));
#178 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#176, #177), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#179 = EDGE_CURVE ('', #175, #167, #178, .T.);
#180 = ORIENTED_EDGE ('', *, *, #179, .F.);
#181 = CARTESIAN_POINT ('', (4.19999999999997, 7.7042135623731, 14.1));
#182 = VERTEX_POINT ('', #181);
#183 = CARTESIAN_POINT ('', (4.19999999999997, 7.7042135623731, 14.1));
#184 = CARTESIAN_POINT ('', (4.19999999999997, 8., 14.1));
#185 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#183, #184), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#186 = EDGE_CURVE ('', #182, #175, #185, .T.);
#187 = ORIENTED_EDGE ('', *, *, #186, .F.);
#188 = CARTESIAN_POINT ('', (12.1224402221811, 7.7042135623731, 14.1));
#189 = CARTESIAN_POINT ('', (4.19999999999997, 7.7042135623731, 14.1));
#190 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#188, #189), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#191 = EDGE_CURVE ('', #165, #182, #190, .T.);
#192 = ORIENTED_EDGE ('', *, *, #191, .F.);
#193 = EDGE_LOOP ('', (#173, #180, #187, #192));
#194 = FACE_OUTER_BOUND ('', #193, .T.);
#195 = CARTESIAN_POINT ('', (4.19899999999998, 7.7032135623731, 14.1));
#196 = CARTESIAN_POINT ('', (4.19899999999998, 8.001, 14.1));
#197 = CARTESIAN_POINT ('', (12.1234402221811, 7.7032135623731, 14.1));
#198 = CARTESIAN_POINT ('', (12.1234402221811, 8.001, 14.1));
#199 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#195, #196), (#197, #198)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-5.92344022218114, 2.001), (3.0032135623731, 3.301), .UNSPECIFIED.);
#200 = ADVANCED_FACE ('', (#194), #199, .T.);
#201 = CARTESIAN_POINT ('', (4.19999999999997, 8., 15.));
#202 = VERTEX_POINT ('', #201);
#203 = CARTESIAN_POINT ('', (4.19999999999997, 8., 14.1));
#204 = CARTESIAN_POINT ('', (4.19999999999997, 8., 15.));
#205 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#203, #204), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#206 = EDGE_CURVE ('', #175, #202, #205, .T.);
#207 = ORIENTED_EDGE ('', *, *, #206, .F.);
#208 = ORIENTED_EDGE ('', *, *, #179, .T.);
#209 = CARTESIAN_POINT ('', (11.5, 8., 0.));
#210 = VERTEX_POINT ('', #209);
#211 = CARTESIAN_POINT ('', (11.5, 8., 0.));
#212 = CARTESIAN_POINT ('', (11.5, 8., 14.1));
#213 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#211, #212), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#214 = EDGE_CURVE ('', #210, #167, #213, .T.);
#215 = ORIENTED_EDGE ('', *, *, #214, .F.);
#216 = CARTESIAN_POINT ('', (-80., 8., 0.));
#217 = VERTEX_POINT ('', #216);
#218 = CARTESIAN_POINT ('', (-80., 8., 0.));
#219 = CARTESIAN_POINT ('', (11.5, 8., 0.));
#220 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#218, #219), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#221 = EDGE_CURVE ('', #217, #210, #220, .T.);
#222 = ORIENTED_EDGE ('', *, *, #221, .F.);
#223 = CARTESIAN_POINT ('', (-80., 8.00000000000001, 16.));
#224 = VERTEX_POINT ('', #223);
#225 = CARTESIAN_POINT ('', (-80., 8.00000000000001, 16.));
#226 = CARTESIAN_POINT ('', (-80., 8., 0.));
#227 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#225, #226), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#228 = EDGE_CURVE ('', #224, #217, #227, .T.);
#229 = ORIENTED_EDGE ('', *, *, #228, .F.);
#230 = CARTESIAN_POINT ('', (3.19999999999997, 8., 16.));
#231 = VERTEX_POINT ('', #230);
#232 = CARTESIAN_POINT ('', (-80., 8.00000000000001, 16.));
#233 = CARTESIAN_POINT ('', (3.19999999999997, 8., 16.));
#234 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#232, #233), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#235 = EDGE_CURVE ('', #224, #231, #234, .T.);
#236 = ORIENTED_EDGE ('', *, *, #235, .T.);
#237 = CARTESIAN_POINT ('', (4.19999999999997, 8., 15.));
#238 = CARTESIAN_POINT ('', (3.19999999999997, 8., 16.));
#239 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#237, #238), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#240 = EDGE_CURVE ('', #202, #231, #239, .T.);
#241 = ORIENTED_EDGE ('', *, *, #240, .F.);
#242 = EDGE_LOOP ('', (#207, #208, #215, #222, #229, #236, #241));
#243 = FACE_OUTER_BOUND ('', #242, .T.);
#244 = CARTESIAN_POINT ('', (11.501, 8., 16.001));
#245 = CARTESIAN_POINT ('', (-80.001, 8.00000000000001, 16.001));
#246 = CARTESIAN_POINT ('', (11.501, 8., -0.000999999999997669));
#247 = CARTESIAN_POINT ('', (-80.001, 8.00000000000001, -0.000999999999997669));
#248 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#244, #245), (#246, #247)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.000999999999999446, 16.001), (-91.501, 0.00100000000000477), .UNSPECIFIED.);
#249 = ADVANCED_FACE ('', (#243), #248, .T.);
#250 = ORIENTED_EDGE ('', *, *, #235, .F.);
#251 = CARTESIAN_POINT ('', (-80., -7.99999999999999, 16.));
#252 = VERTEX_POINT ('', #251);
#253 = CARTESIAN_POINT ('', (-80., -7.99999999999999, 16.));
#254 = CARTESIAN_POINT ('', (-80., 8.00000000000001, 16.));
#255 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#253, #254), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#256 = EDGE_CURVE ('', #252, #224, #255, .T.);
#257 = ORIENTED_EDGE ('', *, *, #256, .F.);
#258 = CARTESIAN_POINT ('', (2.67867965644035, -8., 16.));
#259 = VERTEX_POINT ('', #258);
#260 = CARTESIAN_POINT ('', (-80., -7.99999999999999, 16.));
#261 = CARTESIAN_POINT ('', (2.67867965644035, -8., 16.));
#262 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#260, #261), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#263 = EDGE_CURVE ('', #252, #259, #262, .T.);
#264 = ORIENTED_EDGE ('', *, *, #263, .T.);
#265 = CARTESIAN_POINT ('', (2.67867965644034, 5., 16.));
#266 = VERTEX_POINT ('', #265);
#267 = CARTESIAN_POINT ('', (2.67867965644035, -8., 16.));
#268 = CARTESIAN_POINT ('', (2.67867965644034, 5., 16.));
#269 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#267, #268), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#270 = EDGE_CURVE ('', #259, #266, #269, .T.);
#271 = ORIENTED_EDGE ('', *, *, #270, .T.);
#272 = CARTESIAN_POINT ('', (3.19999999999997, 5., 16.));
#273 = VERTEX_POINT ('', #272);
#274 = CARTESIAN_POINT ('', (3.19999999999997, 5., 16.));
#275 = CARTESIAN_POINT ('', (2.67867965644034, 5., 16.));
#276 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#274, #275), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#277 = EDGE_CURVE ('', #273, #266, #276, .T.);
#278 = ORIENTED_EDGE ('', *, *, #277, .F.);
#279 = CARTESIAN_POINT ('', (3.19999999999997, 8., 16.));
#280 = CARTESIAN_POINT ('', (3.19999999999997, 5., 16.));
#281 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#279, #280), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#282 = EDGE_CURVE ('', #231, #273, #281, .T.);
#283 = ORIENTED_EDGE ('', *, *, #282, .F.);
#284 = EDGE_LOOP ('', (#250, #257, #264, #271, #278, #283));
#285 = FACE_OUTER_BOUND ('', #284, .T.);
#286 = CARTESIAN_POINT ('', (-80.001, -8.00099999999999, 16.));
#287 = CARTESIAN_POINT ('', (-80.001, 8.001, 16.));
#288 = CARTESIAN_POINT ('', (3.20099999999998, -8.001, 16.));
#289 = CARTESIAN_POINT ('', (3.20099999999998, 8.00099999999999, 16.));
#290 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#286, #287), (#288, #289)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00100000000000477, 83.201), (-16.001, 0.000999999999999446), .UNSPECIFIED.);
#291 = ADVANCED_FACE ('', (#285), #290, .T.);
#292 = CARTESIAN_POINT ('', (4.5, -8., 14.1786796564403));
#293 = CARTESIAN_POINT ('', (2.67867965644035, -8., 16.));
#294 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#292, #293), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#295 = EDGE_CURVE ('', #136, #259, #294, .T.);
#296 = ORIENTED_EDGE ('', *, *, #295, .T.);
#297 = ORIENTED_EDGE ('', *, *, #263, .F.);
#298 = CARTESIAN_POINT ('', (-80., -8., 8.88178419700125E-16));
#299 = VERTEX_POINT ('', #298);
#300 = CARTESIAN_POINT ('', (-80., -8., 8.88178419700125E-16));
#301 = CARTESIAN_POINT ('', (-80., -7.99999999999999, 16.));
#302 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#300, #301), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#303 = EDGE_CURVE ('', #299, #252, #302, .T.);
#304 = ORIENTED_EDGE ('', *, *, #303, .F.);
#305 = CARTESIAN_POINT ('', (11.5, -8., 8.88178419700125E-16));
#306 = VERTEX_POINT ('', #305);
#307 = CARTESIAN_POINT ('', (-80., -8., 8.88178419700125E-16));
#308 = CARTESIAN_POINT ('', (11.5, -8., 8.88178419700125E-16));
#309 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#307, #308), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#310 = EDGE_CURVE ('', #299, #306, #309, .T.);
#311 = ORIENTED_EDGE ('', *, *, #310, .T.);
#312 = CARTESIAN_POINT ('', (11.5, -8., 8.88178419700125E-16));
#313 = CARTESIAN_POINT ('', (11.5, -8., 16.));
#314 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#312, #313), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#315 = EDGE_CURVE ('', #306, #85, #314, .T.);
#316 = ORIENTED_EDGE ('', *, *, #315, .T.);
#317 = ORIENTED_EDGE ('', *, *, #89, .F.);
#318 = ORIENTED_EDGE ('', *, *, #145, .T.);
#319 = EDGE_LOOP ('', (#296, #297, #304, #311, #316, #317, #318));
#320 = FACE_OUTER_BOUND ('', #319, .T.);
#321 = CARTESIAN_POINT ('', (11.501, -8., -0.000999999999997669));
#322 = CARTESIAN_POINT ('', (-80.001, -8., -0.000999999999997669));
#323 = CARTESIAN_POINT ('', (11.501, -8., 16.001));
#324 = CARTESIAN_POINT ('', (-80.001, -8., 16.001));
#325 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#321, #322), (#323, #324)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-16.001, 0.00100000000000033), (-91.501, 0.00100000000000477), .UNSPECIFIED.);
#326 = ADVANCED_FACE ('', (#320), #325, .T.);
#327 = CARTESIAN_POINT ('', (15.6219163867213, 7.7, 0.));
#328 = VERTEX_POINT ('', #327);
#329 = CARTESIAN_POINT ('', (15.6219163867213, 5.3, 0.));
#330 = VERTEX_POINT ('', #329);
#331 = CARTESIAN_POINT ('', (15.6219163867213, 7.7, 0.));
#332 = CARTESIAN_POINT ('', (15.6219163867213, 5.3, 0.));
#333 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#331, #332), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#334 = EDGE_CURVE ('', #328, #330, #333, .T.);
#335 = ORIENTED_EDGE ('', *, *, #334, .T.);
#336 = CARTESIAN_POINT ('', (12.5, 5.3, 0.));
#337 = VERTEX_POINT ('', #336);
#338 = CARTESIAN_POINT ('', (12.5, 5.3, 0.));
#339 = CARTESIAN_POINT ('', (15.6219163867213, 5.3, 0.));
#340 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#338, #339), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#341 = EDGE_CURVE ('', #337, #330, #340, .T.);
#342 = ORIENTED_EDGE ('', *, *, #341, .F.);
#343 = CARTESIAN_POINT ('', (11.5, 4.3, 0.));
#344 = VERTEX_POINT ('', #343);
#345 = CARTESIAN_POINT ('', (11.5, 4.3, 0.));
#346 = CARTESIAN_POINT ('', (11.5, 5.3, 0.));
#347 = CARTESIAN_POINT ('', (12.5, 5.3, 0.));
#348 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#345, #346, #347), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 90.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#349 = EDGE_CURVE ('', #344, #337, #348, .T.);
#350 = ORIENTED_EDGE ('', *, *, #349, .F.);
#351 = CARTESIAN_POINT ('', (11.5, -8., 8.88178419700125E-16));
#352 = CARTESIAN_POINT ('', (11.5, 4.3, 9.86076131526265E-32));
#353 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#351, #352), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#354 = EDGE_CURVE ('', #306, #344, #353, .T.);
#355 = ORIENTED_EDGE ('', *, *, #354, .F.);
#356 = ORIENTED_EDGE ('', *, *, #310, .F.);
#357 = CARTESIAN_POINT ('', (-80., 8., 0.));
#358 = CARTESIAN_POINT ('', (-80., -8., 8.88178419700125E-16));
#359 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#357, #358), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#360 = EDGE_CURVE ('', #217, #299, #359, .T.);
#361 = ORIENTED_EDGE ('', *, *, #360, .F.);
#362 = ORIENTED_EDGE ('', *, *, #221, .T.);
#363 = CARTESIAN_POINT ('', (12.2141428428543, 7.7, 0.));
#364 = VERTEX_POINT ('', #363);
#365 = CARTESIAN_POINT ('', (12.2141428428543, 7.7, 0.));
#366 = CARTESIAN_POINT ('', (11.7940588176459, 7.7, 0.));
#367 = CARTESIAN_POINT ('', (11.5, 8., 0.));
#368 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#365, #366, #367), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (270., 315.572995999194), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.921954445729289, 1.))
   REPRESENTATION_ITEM ('')
);
#369 = EDGE_CURVE ('', #364, #210, #368, .T.);
#370 = ORIENTED_EDGE ('', *, *, #369, .F.);
#371 = CARTESIAN_POINT ('', (15.6219163867213, 7.7, 0.));
#372 = CARTESIAN_POINT ('', (12.2141428428543, 7.7, 0.));
#373 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#371, #372), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#374 = EDGE_CURVE ('', #328, #364, #373, .T.);
#375 = ORIENTED_EDGE ('', *, *, #374, .F.);
#376 = EDGE_LOOP ('', (#335, #342, #350, #355, #356, #361, #362, #370, #375));
#377 = FACE_OUTER_BOUND ('', #376, .T.);
#378 = ORIENTED_EDGE ('', *, *, #11, .F.);
#379 = CARTESIAN_POINT ('', (5.85000000000001, -0.999999999999999, 0.));
#380 = CARTESIAN_POINT ('', (5.85000000000001, 0.650000000000001, 0.));
#381 = CARTESIAN_POINT ('', (7.50000000000001, 0.650000000000002, 0.));
#382 = CARTESIAN_POINT ('', (9.15000000000001, 0.650000000000002, 0.));
#383 = CARTESIAN_POINT ('', (9.15000000000001, -0.999999999999998, 0.));
#384 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#379, #380, #381, #382, #383), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#385 = EDGE_CURVE ('', #4, #2, #384, .T.);
#386 = ORIENTED_EDGE ('', *, *, #385, .F.);
#387 = EDGE_LOOP ('', (#378, #386));
#388 = FACE_BOUND ('', #387, .T.);
#389 = CARTESIAN_POINT ('', (15.6229163867213, -8.001, 8.88178419700125E-16));
#390 = CARTESIAN_POINT ('', (15.6229163867213, 8.001, 1.83083715338312E-32));
#391 = CARTESIAN_POINT ('', (-80.001, -8.00099999999999, 8.88178419700125E-16));
#392 = CARTESIAN_POINT ('', (-80.001, 8.00100000000001, 1.83083715338312E-32));
#393 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#389, #390), (#391, #392)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-95.6229163867213, 0.00100000000000477), (-16.001, 0.00100000000000122), .UNSPECIFIED.);
#394 = ADVANCED_FACE ('', (#377, #388), #393, .T.);
#395 = ORIENTED_EDGE ('', *, *, #228, .T.);
#396 = ORIENTED_EDGE ('', *, *, #360, .T.);
#397 = ORIENTED_EDGE ('', *, *, #303, .T.);
#398 = ORIENTED_EDGE ('', *, *, #256, .T.);
#399 = EDGE_LOOP ('', (#395, #396, #397, #398));
#400 = FACE_OUTER_BOUND ('', #399, .T.);
#401 = CARTESIAN_POINT ('', (-80., -8.00099999999999, 16.001));
#402 = CARTESIAN_POINT ('', (-80., -8.00099999999999, -0.00099999999999234));
#403 = CARTESIAN_POINT ('', (-80., 8.001, 16.001));
#404 = CARTESIAN_POINT ('', (-80., 8.001, -0.00099999999999234));
#405 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#401, #402), (#403, #404)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00100000000000122, 16.001), (-16.001, 0.000999999999999446), .UNSPECIFIED.);
#406 = ADVANCED_FACE ('', (#400), #405, .T.);
#407 = CARTESIAN_POINT ('', (12.5, 5.3, 14.0957864376269));
#408 = VERTEX_POINT ('', #407);
#409 = CARTESIAN_POINT ('', (12.5, 5.3, 0.));
#410 = CARTESIAN_POINT ('', (12.5, 5.3, 14.0957864376269));
#411 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#409, #410), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#412 = EDGE_CURVE ('', #337, #408, #411, .T.);
#413 = ORIENTED_EDGE ('', *, *, #412, .F.);
#414 = ORIENTED_EDGE ('', *, *, #341, .T.);
#415 = CARTESIAN_POINT ('', (19.3988709793649, 5.3, 14.0957864376269));
#416 = VERTEX_POINT ('', #415);
#417 = CARTESIAN_POINT ('', (19.3988709793649, 5.3, 14.0957864376269));
#418 = CARTESIAN_POINT ('', (15.6219163867213, 5.3, 0.));
#419 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#417, #418), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#420 = EDGE_CURVE ('', #416, #330, #419, .T.);
#421 = ORIENTED_EDGE ('', *, *, #420, .F.);
#422 = CARTESIAN_POINT ('', (12.5, 5.3, 14.0957864376269));
#423 = CARTESIAN_POINT ('', (19.3988709793649, 5.3, 14.0957864376269));
#424 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#422, #423), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#425 = EDGE_CURVE ('', #408, #416, #424, .T.);
#426 = ORIENTED_EDGE ('', *, *, #425, .F.);
#427 = EDGE_LOOP ('', (#413, #414, #421, #426));
#428 = FACE_OUTER_BOUND ('', #427, .T.);
#429 = CARTESIAN_POINT ('', (19.3998709793649, 5.3, 14.0967864376269));
#430 = CARTESIAN_POINT ('', (19.3998709793649, 5.3, -0.000999999999999446));
#431 = CARTESIAN_POINT ('', (12.499, 5.3, 14.0967864376269));
#432 = CARTESIAN_POINT ('', (12.499, 5.3, -0.000999999999999446));
#433 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#429, #430), (#431, #432)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-6.901, -0.000129020635127777), (-14.0967864376269, 0.000999999999999446), .UNSPECIFIED.);
#434 = ADVANCED_FACE ('', (#428), #433, .T.);
#435 = CARTESIAN_POINT ('', (11.5, 4.3, 14.1));
#436 = VERTEX_POINT ('', #435);
#437 = CARTESIAN_POINT ('', (12.4082973793269, 5.29578643762691, 14.1));
#438 = VERTEX_POINT ('', #437);
#439 = CARTESIAN_POINT ('', (11.5, 4.3, 14.1));
#440 = CARTESIAN_POINT ('', (11.5, 5.21214074123316, 14.1));
#441 = CARTESIAN_POINT ('', (12.4082973793269, 5.29578643762691, 14.1));
#442 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#439, #440, #441), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 84.7384348094801), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.738817508141579, 1.))
   REPRESENTATION_ITEM ('')
);
#443 = EDGE_CURVE ('', #436, #438, #442, .T.);
#444 = ORIENTED_EDGE ('', *, *, #443, .F.);
#445 = CARTESIAN_POINT ('', (11.5, 4.3, 0.));
#446 = CARTESIAN_POINT ('', (11.5, 4.3, 14.1));
#447 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#445, #446), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#448 = EDGE_CURVE ('', #344, #436, #447, .T.);
#449 = ORIENTED_EDGE ('', *, *, #448, .F.);
#450 = ORIENTED_EDGE ('', *, *, #349, .T.);
#451 = ORIENTED_EDGE ('', *, *, #412, .T.);
#452 = CARTESIAN_POINT ('', (12.4082973793269, 5.29578643762691, 14.1));
#453 = CARTESIAN_POINT ('', (12.4387896607632, 5.29859449165571, 14.0971919459712));
#454 = CARTESIAN_POINT ('', (12.4693786937801, 5.3, 14.0957864376269));
#455 = CARTESIAN_POINT ('', (12.5, 5.3, 14.0957864376269));
#456 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#452, #453, #454, #455), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (3.0497610172069, 3.14159265358979), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.999297369337099, 0.999297369337099, 1.))
   REPRESENTATION_ITEM ('')
);
#457 = EDGE_CURVE ('', #438, #408, #456, .T.);
#458 = ORIENTED_EDGE ('', *, *, #457, .F.);
#459 = EDGE_LOOP ('', (#444, #449, #450, #451, #458));
#460 = FACE_OUTER_BOUND ('', #459, .T.);
#461 = CARTESIAN_POINT ('', (13.5, 4.3, -1.4112));
#462 = CARTESIAN_POINT ('', (13.5, 4.3, 15.5112));
#463 = CARTESIAN_POINT ('', (13.5, 3.3, -1.4112));
#464 = CARTESIAN_POINT ('', (13.5, 3.3, 15.5112));
#465 = CARTESIAN_POINT ('', (12.5, 3.3, -1.4112));
#466 = CARTESIAN_POINT ('', (12.5, 3.3, 15.5112));
#467 = CARTESIAN_POINT ('', (11.5, 3.3, -1.4112));
#468 = CARTESIAN_POINT ('', (11.5, 3.3, 15.5112));
#469 = CARTESIAN_POINT ('', (11.5, 4.3, -1.4112));
#470 = CARTESIAN_POINT ('', (11.5, 4.3, 15.5112));
#471 = CARTESIAN_POINT ('', (11.5, 5.3, -1.4112));
#472 = CARTESIAN_POINT ('', (11.5, 5.3, 15.5112));
#473 = CARTESIAN_POINT ('', (12.5, 5.3, -1.4112));
#474 = CARTESIAN_POINT ('', (12.5, 5.3, 15.5112));
#475 = CARTESIAN_POINT ('', (13.5, 5.3, -1.4112));
#476 = CARTESIAN_POINT ('', (13.5, 5.3, 15.5112));
#477 = CARTESIAN_POINT ('', (13.5, 4.3, -1.4112));
#478 = CARTESIAN_POINT ('', (13.5, 4.3, 15.5112));
#479 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#461, #462), (#463, #464), (#465, #466), (#467, #468), (#469, #470), (#471, #472), (#473, #474), (#475, #476), (#477, #478)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#480 = ADVANCED_FACE ('', (#460), #479, .T.);
#481 = ORIENTED_EDGE ('', *, *, #96, .F.);
#482 = ORIENTED_EDGE ('', *, *, #315, .F.);
#483 = ORIENTED_EDGE ('', *, *, #354, .T.);
#484 = ORIENTED_EDGE ('', *, *, #448, .T.);
#485 = CARTESIAN_POINT ('', (11.5, 2.7, 14.1));
#486 = VERTEX_POINT ('', #485);
#487 = CARTESIAN_POINT ('', (11.5, 2.7, 14.1));
#488 = CARTESIAN_POINT ('', (11.5, 4.3, 14.1));
#489 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#487, #488), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#490 = EDGE_CURVE ('', #486, #436, #489, .T.);
#491 = ORIENTED_EDGE ('', *, *, #490, .F.);
#492 = CARTESIAN_POINT ('', (11.5, 2.7, 16.));
#493 = CARTESIAN_POINT ('', (11.5, 2.7, 14.1));
#494 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#492, #493), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#495 = EDGE_CURVE ('', #92, #486, #494, .T.);
#496 = ORIENTED_EDGE ('', *, *, #495, .F.);
#497 = EDGE_LOOP ('', (#481, #482, #483, #484, #491, #496));
#498 = FACE_OUTER_BOUND ('', #497, .T.);
#499 = CARTESIAN_POINT ('', (11.5, 4.301, 16.001));
#500 = CARTESIAN_POINT ('', (11.5, 4.301, -0.00099999999999234));
#501 = CARTESIAN_POINT ('', (11.5, -8.001, 16.001));
#502 = CARTESIAN_POINT ('', (11.5, -8.001, -0.00099999999999234));
#503 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#499, #500), (#501, #502)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.000999999999999446, 12.301), (-16.001, 0.000999999999999446), .UNSPECIFIED.);
#504 = ADVANCED_FACE ('', (#498), #503, .T.);
#505 = CARTESIAN_POINT ('', (12.2141428428543, 7.7, 14.0957864376269));
#506 = VERTEX_POINT ('', #505);
#507 = CARTESIAN_POINT ('', (12.2141428428543, 7.7, 0.));
#508 = CARTESIAN_POINT ('', (12.2141428428543, 7.7, 14.0957864376269));
#509 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#507, #508), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#510 = EDGE_CURVE ('', #364, #506, #509, .T.);
#511 = ORIENTED_EDGE ('', *, *, #510, .F.);
#512 = ORIENTED_EDGE ('', *, *, #369, .T.);
#513 = ORIENTED_EDGE ('', *, *, #214, .T.);
#514 = ORIENTED_EDGE ('', *, *, #172, .F.);
#515 = CARTESIAN_POINT ('', (12.2141428428543, 7.7, 14.0957864376269));
#516 = CARTESIAN_POINT ('', (12.1835215366343, 7.7, 14.0957864376269));
#517 = CARTESIAN_POINT ('', (12.1529325036174, 7.70140550834429, 14.0971919459712));
#518 = CARTESIAN_POINT ('', (12.1224402221811, 7.7042135623731, 14.1));
#519 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#515, #516, #517, #518), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (3.14159265358979, 3.2334242899728), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.999297369337097, 0.999297369337097, 1.))
   REPRESENTATION_ITEM ('')
);
#520 = EDGE_CURVE ('', #506, #165, #519, .T.);
#521 = ORIENTED_EDGE ('', *, *, #520, .F.);
#522 = EDGE_LOOP ('', (#511, #512, #513, #514, #521));
#523 = FACE_OUTER_BOUND ('', #522, .T.);
#524 = CARTESIAN_POINT ('', (13.2141428428543, 8.7, -1.4112));
#525 = CARTESIAN_POINT ('', (13.2141428428543, 8.7, 15.5112));
#526 = CARTESIAN_POINT ('', (13.2141428428543, 7.7, -1.4112));
#527 = CARTESIAN_POINT ('', (13.2141428428543, 7.7, 15.5112));
#528 = CARTESIAN_POINT ('', (12.2141428428543, 7.7, -1.4112));
#529 = CARTESIAN_POINT ('', (12.2141428428543, 7.7, 15.5112));
#530 = CARTESIAN_POINT ('', (11.2141428428543, 7.7, -1.4112));
#531 = CARTESIAN_POINT ('', (11.2141428428543, 7.7, 15.5112));
#532 = CARTESIAN_POINT ('', (11.2141428428543, 8.7, -1.4112));
#533 = CARTESIAN_POINT ('', (11.2141428428543, 8.7, 15.5112));
#534 = CARTESIAN_POINT ('', (11.2141428428543, 9.7, -1.4112));
#535 = CARTESIAN_POINT ('', (11.2141428428543, 9.7, 15.5112));
#536 = CARTESIAN_POINT ('', (12.2141428428543, 9.7, -1.4112));
#537 = CARTESIAN_POINT ('', (12.2141428428543, 9.7, 15.5112));
#538 = CARTESIAN_POINT ('', (13.2141428428543, 9.7, -1.4112));
#539 = CARTESIAN_POINT ('', (13.2141428428543, 9.7, 15.5112));
#540 = CARTESIAN_POINT ('', (13.2141428428543, 8.7, -1.4112));
#541 = CARTESIAN_POINT ('', (13.2141428428543, 8.7, 15.5112));
#542 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#524, #525), (#526, #527), (#528, #529), (#530, #531), (#532, #533), (#534, #535), (#536, #537), (#538, #539), (#540, #541)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#543 = ADVANCED_FACE ('', (#523), #542, .T.);
#544 = CARTESIAN_POINT ('', (19.3988709793649, 7.7, 14.0957864376269));
#545 = VERTEX_POINT ('', #544);
#546 = CARTESIAN_POINT ('', (15.6219163867213, 7.7, 0.));
#547 = CARTESIAN_POINT ('', (19.3988709793649, 7.7, 14.0957864376269));
#548 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#546, #547), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#549 = EDGE_CURVE ('', #328, #545, #548, .T.);
#550 = ORIENTED_EDGE ('', *, *, #549, .F.);
#551 = ORIENTED_EDGE ('', *, *, #374, .T.);
#552 = ORIENTED_EDGE ('', *, *, #510, .T.);
#553 = CARTESIAN_POINT ('', (19.3988709793649, 7.7, 14.0957864376269));
#554 = CARTESIAN_POINT ('', (12.2141428428543, 7.7, 14.0957864376269));
#555 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#553, #554), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#556 = EDGE_CURVE ('', #545, #506, #555, .T.);
#557 = ORIENTED_EDGE ('', *, *, #556, .F.);
#558 = EDGE_LOOP ('', (#550, #551, #552, #557));
#559 = FACE_OUTER_BOUND ('', #558, .T.);
#560 = CARTESIAN_POINT ('', (12.2131428428543, 7.7, 14.0967864376269));
#561 = CARTESIAN_POINT ('', (12.2131428428543, 7.7, -0.000999999999999446));
#562 = CARTESIAN_POINT ('', (19.3998709793649, 7.7, 14.0967864376269));
#563 = CARTESIAN_POINT ('', (19.3998709793649, 7.7, -0.000999999999999446));
#564 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#560, #561), (#562, #563)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.000129020635128541, 7.18685715714571), (-14.0967864376269, 0.000999999999999446), .UNSPECIFIED.);
#565 = ADVANCED_FACE ('', (#559), #564, .T.);
#566 = CARTESIAN_POINT ('', (19.0868053829966, 6.46464466094067, 12.9311417766862));
#567 = VERTEX_POINT ('', #566);
#568 = CARTESIAN_POINT ('', (19.0868053829966, 6.53535533905933, 12.9311417766862));
#569 = VERTEX_POINT ('', #568);
#570 = CARTESIAN_POINT ('', (19.0868053829966, 6.46464466094067, 12.9311417766862));
#571 = CARTESIAN_POINT ('', (19.08125597352, 6.48535533905933, 12.9104310985676));
#572 = CARTESIAN_POINT ('', (19.08125597352, 6.51464466094067, 12.9104310985676));
#573 = CARTESIAN_POINT ('', (19.0868053829966, 6.53535533905933, 12.9311417766862));
#574 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#570, #571, #572, #573), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (2.3561944901924, 3.92699081698723), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.804737854124381, 0.804737854124381, 1.))
   REPRESENTATION_ITEM ('')
);
#575 = EDGE_CURVE ('', #567, #569, #574, .T.);
#576 = ORIENTED_EDGE ('', *, *, #575, .F.);
#577 = CARTESIAN_POINT ('', (19.3988709793649, 5.3, 14.0957864376269));
#578 = CARTESIAN_POINT ('', (19.0868053829966, 6.46464466094067, 12.9311417766862));
#579 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#577, #578), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#580 = EDGE_CURVE ('', #416, #567, #579, .T.);
#581 = ORIENTED_EDGE ('', *, *, #580, .F.);
#582 = ORIENTED_EDGE ('', *, *, #420, .T.);
#583 = ORIENTED_EDGE ('', *, *, #334, .F.);
#584 = ORIENTED_EDGE ('', *, *, #549, .T.);
#585 = CARTESIAN_POINT ('', (19.0868053829966, 6.53535533905933, 12.9311417766862));
#586 = CARTESIAN_POINT ('', (19.3988709793649, 7.7, 14.0957864376269));
#587 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#585, #586), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#588 = EDGE_CURVE ('', #569, #545, #587, .T.);
#589 = ORIENTED_EDGE ('', *, *, #588, .F.);
#590 = EDGE_LOOP ('', (#576, #581, #582, #583, #584, #589));
#591 = FACE_OUTER_BOUND ('', #590, .T.);
#592 = CARTESIAN_POINT ('', (19.399187966663, 5.299, 14.0969694503288));
#593 = CARTESIAN_POINT ('', (19.399187966663, 7.701, 14.0969694503288));
#594 = CARTESIAN_POINT ('', (15.6215993994232, 5.299, -0.00118301270189554));
#595 = CARTESIAN_POINT ('', (15.6215993994232, 7.701, -0.00118301270189554));
#596 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#592, #593), (#594, #595)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-14.5986188886535, -0.00313745588813941), (-2.701, -0.298999999999999), .UNSPECIFIED.);
#597 = ADVANCED_FACE ('', (#591), #596, .T.);
#598 = ORIENTED_EDGE ('', *, *, #103, .F.);
#599 = ORIENTED_EDGE ('', *, *, #495, .T.);
#600 = CARTESIAN_POINT ('', (6.19999999999997, 2.7, 14.1));
#601 = VERTEX_POINT ('', #600);
#602 = CARTESIAN_POINT ('', (11.5, 2.7, 14.1));
#603 = CARTESIAN_POINT ('', (6.19999999999997, 2.7, 14.1));
#604 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#602, #603), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#605 = EDGE_CURVE ('', #486, #601, #604, .T.);
#606 = ORIENTED_EDGE ('', *, *, #605, .T.);
#607 = CARTESIAN_POINT ('', (6.19999999999997, 2.7, 14.1));
#608 = CARTESIAN_POINT ('', (6.19999999999997, 2.7, 15.8786796564403));
#609 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#607, #608), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#610 = EDGE_CURVE ('', #601, #120, #609, .T.);
#611 = ORIENTED_EDGE ('', *, *, #610, .T.);
#612 = ORIENTED_EDGE ('', *, *, #124, .F.);
#613 = EDGE_LOOP ('', (#598, #599, #606, #611, #612));
#614 = FACE_OUTER_BOUND ('', #613, .T.);
#615 = CARTESIAN_POINT ('', (6.19899999999998, 2.7, 16.001));
#616 = CARTESIAN_POINT ('', (6.19899999999998, 2.7, 14.099));
#617 = CARTESIAN_POINT ('', (11.501, 2.7, 16.001));
#618 = CARTESIAN_POINT ('', (11.501, 2.7, 14.099));
#619 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#615, #616), (#617, #618)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (7.899, 13.201), (-1.901, 0.00100000000000033), .UNSPECIFIED.);
#620 = ADVANCED_FACE ('', (#614), #619, .T.);
#621 = CARTESIAN_POINT ('', (4.19999999999997, 4.7, 14.1));
#622 = VERTEX_POINT ('', #621);
#623 = CARTESIAN_POINT ('', (4.19999999999997, 5.29578643762691, 14.1));
#624 = VERTEX_POINT ('', #623);
#625 = CARTESIAN_POINT ('', (4.19999999999997, 4.7, 14.1));
#626 = CARTESIAN_POINT ('', (4.19999999999997, 5.29578643762691, 14.1));
#627 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#625, #626), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#628 = EDGE_CURVE ('', #622, #624, #627, .T.);
#629 = ORIENTED_EDGE ('', *, *, #628, .F.);
#630 = CARTESIAN_POINT ('', (6.19999999999997, 2.7, 14.1));
#631 = CARTESIAN_POINT ('', (4.19999999999997, 2.7, 14.1));
#632 = CARTESIAN_POINT ('', (4.19999999999997, 4.7, 14.1));
#633 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#630, #631, #632), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#634 = EDGE_CURVE ('', #601, #622, #633, .T.);
#635 = ORIENTED_EDGE ('', *, *, #634, .F.);
#636 = ORIENTED_EDGE ('', *, *, #605, .F.);
#637 = ORIENTED_EDGE ('', *, *, #490, .T.);
#638 = ORIENTED_EDGE ('', *, *, #443, .T.);
#639 = CARTESIAN_POINT ('', (4.19999999999997, 5.29578643762691, 14.1));
#640 = CARTESIAN_POINT ('', (12.4082973793269, 5.29578643762691, 14.1));
#641 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#639, #640), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#642 = EDGE_CURVE ('', #624, #438, #641, .T.);
#643 = ORIENTED_EDGE ('', *, *, #642, .F.);
#644 = EDGE_LOOP ('', (#629, #635, #636, #637, #638, #643));
#645 = FACE_OUTER_BOUND ('', #644, .T.);
#646 = CARTESIAN_POINT ('', (4.19899999999998, 2.699, 14.1));
#647 = CARTESIAN_POINT ('', (4.19899999999998, 5.29678643762691, 14.1));
#648 = CARTESIAN_POINT ('', (12.4092973793269, 2.699, 14.1));
#649 = CARTESIAN_POINT ('', (12.4092973793269, 5.29678643762691, 14.1));
#650 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#646, #647), (#648, #649)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-6.20929737932697, 2.001), (-2.001, 0.596786437626909), .UNSPECIFIED.);
#651 = ADVANCED_FACE ('', (#645), #650, .T.);
#652 = CARTESIAN_POINT ('', (4.19999999999997, 5., 15.));
#653 = VERTEX_POINT ('', #652);
#654 = CARTESIAN_POINT ('', (4.19999999999997, 5., 14.4786796564404));
#655 = VERTEX_POINT ('', #654);
#656 = CARTESIAN_POINT ('', (4.19999999999997, 5., 15.));
#657 = CARTESIAN_POINT ('', (4.19999999999997, 5., 14.4786796564404));
#658 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#656, #657), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#659 = EDGE_CURVE ('', #653, #655, #658, .T.);
#660 = ORIENTED_EDGE ('', *, *, #659, .T.);
#661 = CARTESIAN_POINT ('', (4.19999999999997, 4.7, 14.4786796564404));
#662 = VERTEX_POINT ('', #661);
#663 = CARTESIAN_POINT ('', (4.19999999999997, 4.7, 14.4786796564404));
#664 = CARTESIAN_POINT ('', (4.19999999999997, 5., 14.4786796564404));
#665 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#663, #664), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#666 = EDGE_CURVE ('', #662, #655, #665, .T.);
#667 = ORIENTED_EDGE ('', *, *, #666, .F.);
#668 = CARTESIAN_POINT ('', (4.19999999999997, 4.7, 14.1));
#669 = CARTESIAN_POINT ('', (4.19999999999997, 4.7, 14.4786796564404));
#670 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#668, #669), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#671 = EDGE_CURVE ('', #622, #662, #670, .T.);
#672 = ORIENTED_EDGE ('', *, *, #671, .F.);
#673 = ORIENTED_EDGE ('', *, *, #628, .T.);
#674 = CARTESIAN_POINT ('', (4.19999999999997, 6.46464466094067, 12.9311417766862));
#675 = VERTEX_POINT ('', #674);
#676 = CARTESIAN_POINT ('', (4.19999999999997, 6.46464466094067, 12.9311417766862));
#677 = CARTESIAN_POINT ('', (4.19999999999997, 5.29578643762691, 14.1));
#678 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#676, #677), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#679 = EDGE_CURVE ('', #675, #624, #678, .T.);
#680 = ORIENTED_EDGE ('', *, *, #679, .F.);
#681 = CARTESIAN_POINT ('', (4.19999999999997, 6.53535533905933, 12.9311417766862));
#682 = VERTEX_POINT ('', #681);
#683 = CARTESIAN_POINT ('', (4.19999999999997, 6.53535533905933, 12.9311417766862));
#684 = CARTESIAN_POINT ('', (4.19999999999997, 6.5, 12.8957864376269));
#685 = CARTESIAN_POINT ('', (4.19999999999997, 6.46464466094067, 12.9311417766862));
#686 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#683, #684, #685), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (45.0000000000007, 134.999999999996), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186574, 1.))
   REPRESENTATION_ITEM ('')
);
#687 = EDGE_CURVE ('', #682, #675, #686, .T.);
#688 = ORIENTED_EDGE ('', *, *, #687, .F.);
#689 = CARTESIAN_POINT ('', (4.19999999999997, 7.7042135623731, 14.1));
#690 = CARTESIAN_POINT ('', (4.19999999999997, 6.53535533905933, 12.9311417766862));
#691 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#689, #690), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#692 = EDGE_CURVE ('', #182, #682, #691, .T.);
#693 = ORIENTED_EDGE ('', *, *, #692, .F.);
#694 = ORIENTED_EDGE ('', *, *, #186, .T.);
#695 = ORIENTED_EDGE ('', *, *, #206, .T.);
#696 = CARTESIAN_POINT ('', (4.19999999999997, 5., 15.));
#697 = CARTESIAN_POINT ('', (4.19999999999997, 8., 15.));
#698 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#696, #697), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#699 = EDGE_CURVE ('', #653, #202, #698, .T.);
#700 = ORIENTED_EDGE ('', *, *, #699, .F.);
#701 = EDGE_LOOP ('', (#660, #667, #672, #673, #680, #688, #693, #694, #695, #700));
#702 = FACE_OUTER_BOUND ('', #701, .T.);
#703 = CARTESIAN_POINT ('', (4.19999999999997, 8.001, 15.001));
#704 = CARTESIAN_POINT ('', (4.19999999999997, 8.001, 12.8947864376269));
#705 = CARTESIAN_POINT ('', (4.19999999999997, 4.699, 15.001));
#706 = CARTESIAN_POINT ('', (4.19999999999997, 4.699, 12.8947864376269));
#707 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#703, #704), (#705, #706)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-3.301, 0.000999999999999446), (-0.901000000000013, 1.2052135623731), .UNSPECIFIED.);
#708 = ADVANCED_FACE ('', (#702), #707, .T.);
#709 = ORIENTED_EDGE ('', *, *, #133, .F.);
#710 = ORIENTED_EDGE ('', *, *, #610, .F.);
#711 = ORIENTED_EDGE ('', *, *, #634, .T.);
#712 = ORIENTED_EDGE ('', *, *, #671, .T.);
#713 = CARTESIAN_POINT ('', (4.5, 3.6464346247147, 14.1786796564403));
#714 = CARTESIAN_POINT ('', (4.302615378463, 3.9649282507244, 14.3760642779773));
#715 = CARTESIAN_POINT ('', (4.19999999999997, 4.32530161645917, 14.4786796564404));
#716 = CARTESIAN_POINT ('', (4.19999999999997, 4.7, 14.4786796564404));
#717 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#713, #714, #715, #716), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (5.7283742741995, 6.28318530717959), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.97451280205571, 0.97451280205571, 1.))
   REPRESENTATION_ITEM ('')
);
#718 = EDGE_CURVE ('', #127, #662, #717, .T.);
#719 = ORIENTED_EDGE ('', *, *, #718, .F.);
#720 = EDGE_LOOP ('', (#709, #710, #711, #712, #719));
#721 = FACE_OUTER_BOUND ('', #720, .T.);
#722 = CARTESIAN_POINT ('', (8.19999999999997, 4.7, 13.920932034356));
#723 = CARTESIAN_POINT ('', (8.19999999999997, 4.7, 16.0577476220844));
#724 = CARTESIAN_POINT ('', (8.19999999999997, 2.7, 13.920932034356));
#725 = CARTESIAN_POINT ('', (8.19999999999997, 2.7, 16.0577476220844));
#726 = CARTESIAN_POINT ('', (6.19999999999997, 2.7, 13.920932034356));
#727 = CARTESIAN_POINT ('', (6.19999999999997, 2.7, 16.0577476220844));
#728 = CARTESIAN_POINT ('', (4.19999999999997, 2.7, 13.920932034356));
#729 = CARTESIAN_POINT ('', (4.19999999999997, 2.7, 16.0577476220844));
#730 = CARTESIAN_POINT ('', (4.19999999999997, 4.7, 13.920932034356));
#731 = CARTESIAN_POINT ('', (4.19999999999997, 4.7, 16.0577476220844));
#732 = CARTESIAN_POINT ('', (4.19999999999997, 6.69999999999999, 13.920932034356));
#733 = CARTESIAN_POINT ('', (4.19999999999997, 6.69999999999999, 16.0577476220844));
#734 = CARTESIAN_POINT ('', (6.19999999999997, 6.7, 13.920932034356));
#735 = CARTESIAN_POINT ('', (6.19999999999997, 6.7, 16.0577476220844));
#736 = CARTESIAN_POINT ('', (8.19999999999997, 6.7, 13.920932034356));
#737 = CARTESIAN_POINT ('', (8.19999999999997, 6.7, 16.0577476220844));
#738 = CARTESIAN_POINT ('', (8.19999999999997, 4.7, 13.920932034356));
#739 = CARTESIAN_POINT ('', (8.19999999999997, 4.7, 16.0577476220844));
#740 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#722, #723), (#724, #725), (#726, #727), (#728, #729), (#730, #731), (#732, #733), (#734, #735), (#736, #737), (#738, #739)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#741 = ADVANCED_FACE ('', (#721), #740, .T.);
#742 = CARTESIAN_POINT ('', (4.19999999999997, 6.46464466094067, 12.9311417766862));
#743 = CARTESIAN_POINT ('', (19.0868053829966, 6.46464466094067, 12.9311417766862));
#744 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#742, #743), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#745 = EDGE_CURVE ('', #675, #567, #744, .T.);
#746 = ORIENTED_EDGE ('', *, *, #745, .T.);
#747 = ORIENTED_EDGE ('', *, *, #575, .T.);
#748 = CARTESIAN_POINT ('', (4.19999999999997, 6.53535533905933, 12.9311417766862));
#749 = CARTESIAN_POINT ('', (19.0868053829966, 6.53535533905933, 12.9311417766862));
#750 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#748, #749), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#751 = EDGE_CURVE ('', #682, #569, #750, .T.);
#752 = ORIENTED_EDGE ('', *, *, #751, .F.);
#753 = ORIENTED_EDGE ('', *, *, #687, .T.);
#754 = EDGE_LOOP ('', (#746, #747, #752, #753));
#755 = FACE_OUTER_BOUND ('', #754, .T.);
#756 = CARTESIAN_POINT ('', (2.71011946170032, 6.45, 12.9664971157456));
#757 = CARTESIAN_POINT ('', (20.5766859212963, 6.45, 12.9664971157456));
#758 = CARTESIAN_POINT ('', (2.71011946170032, 6.45000000000001, 13.0164971157456));
#759 = CARTESIAN_POINT ('', (20.5766859212963, 6.45000000000001, 13.0164971157456));
#760 = CARTESIAN_POINT ('', (2.71011946170032, 6.50000000000001, 13.0164971157456));
#761 = CARTESIAN_POINT ('', (20.5766859212963, 6.50000000000001, 13.0164971157456));
#762 = CARTESIAN_POINT ('', (2.71011946170032, 6.55000000000001, 13.0164971157456));
#763 = CARTESIAN_POINT ('', (20.5766859212963, 6.55000000000001, 13.0164971157456));
#764 = CARTESIAN_POINT ('', (2.71011946170032, 6.55, 12.9664971157456));
#765 = CARTESIAN_POINT ('', (20.5766859212963, 6.55, 12.9664971157456));
#766 = CARTESIAN_POINT ('', (2.71011946170032, 6.55, 12.9164971157456));
#767 = CARTESIAN_POINT ('', (20.5766859212963, 6.55, 12.9164971157456));
#768 = CARTESIAN_POINT ('', (2.71011946170032, 6.5, 12.9164971157456));
#769 = CARTESIAN_POINT ('', (20.5766859212963, 6.5, 12.9164971157456));
#770 = CARTESIAN_POINT ('', (2.71011946170032, 6.45, 12.9164971157456));
#771 = CARTESIAN_POINT ('', (20.5766859212963, 6.45, 12.9164971157456));
#772 = CARTESIAN_POINT ('', (2.71011946170032, 6.45, 12.9664971157456));
#773 = CARTESIAN_POINT ('', (20.5766859212963, 6.45, 12.9664971157456));
#774 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#756, #757), (#758, #759), (#760, #761), (#762, #763), (#764, #765), (#766, #767), (#768, #769), (#770, #771), (#772, #773)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.249999999999999, 0.5, 0.750000000000002, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#775 = ADVANCED_FACE ('', (#755), #774, .T.);
#776 = ORIENTED_EDGE ('', *, *, #751, .T.);
#777 = ORIENTED_EDGE ('', *, *, #588, .T.);
#778 = ORIENTED_EDGE ('', *, *, #556, .T.);
#779 = ORIENTED_EDGE ('', *, *, #520, .T.);
#780 = ORIENTED_EDGE ('', *, *, #191, .T.);
#781 = ORIENTED_EDGE ('', *, *, #692, .T.);
#782 = EDGE_LOOP ('', (#776, #777, #778, #779, #780, #781));
#783 = FACE_OUTER_BOUND ('', #782, .T.);
#784 = CARTESIAN_POINT ('', (19.3998709793649, 6.53435533905933, 12.9301417766862));
#785 = CARTESIAN_POINT ('', (4.19899999999997, 6.53435533905933, 12.9301417766862));
#786 = CARTESIAN_POINT ('', (19.3998709793649, 7.7052135623731, 14.101));
#787 = CARTESIAN_POINT ('', (4.19899999999997, 7.7052135623731, 14.101));
#788 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#784, #785), (#786, #787)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (1.70978419690907, 3.36562777593547), (-20.5889863572279, -5.38811537786295), .UNSPECIFIED.);
#789 = ADVANCED_FACE ('', (#783), #788, .T.);
#790 = ORIENTED_EDGE ('', *, *, #425, .T.);
#791 = ORIENTED_EDGE ('', *, *, #580, .T.);
#792 = ORIENTED_EDGE ('', *, *, #745, .F.);
#793 = ORIENTED_EDGE ('', *, *, #679, .T.);
#794 = ORIENTED_EDGE ('', *, *, #642, .T.);
#795 = ORIENTED_EDGE ('', *, *, #457, .T.);
#796 = EDGE_LOOP ('', (#790, #791, #792, #793, #794, #795));
#797 = FACE_OUTER_BOUND ('', #796, .T.);
#798 = CARTESIAN_POINT ('', (19.3998709793649, 5.29478643762691, 14.101));
#799 = CARTESIAN_POINT ('', (4.19899999999997, 5.29478643762691, 14.101));
#800 = CARTESIAN_POINT ('', (19.3998709793649, 6.46564466094067, 12.9301417766862));
#801 = CARTESIAN_POINT ('', (4.19899999999997, 6.46564466094067, 12.9301417766862));
#802 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#798, #799), (#800, #801)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00141421356237403, 1.65442936546403), (-20.5889863572279, -5.38811537786295), .UNSPECIFIED.);
#803 = ADVANCED_FACE ('', (#797), #802, .T.);
#804 = ORIENTED_EDGE ('', *, *, #18, .F.);
#805 = ORIENTED_EDGE ('', *, *, #385, .T.);
#806 = ORIENTED_EDGE ('', *, *, #42, .T.);
#807 = ORIENTED_EDGE ('', *, *, #74, .F.);
#808 = ORIENTED_EDGE ('', *, *, #154, .T.);
#809 = EDGE_LOOP ('', (#804, #805, #806, #807, #808));
#810 = FACE_OUTER_BOUND ('', #809, .T.);
#811 = CARTESIAN_POINT ('', (9.15000000000001, -0.999999999999999, -1.6012));
#812 = CARTESIAN_POINT ('', (9.15000000000001, -0.999999999999998, 17.6012));
#813 = CARTESIAN_POINT ('', (9.15000000000001, -2.65, -1.6012));
#814 = CARTESIAN_POINT ('', (9.15000000000001, -2.65, 17.6012));
#815 = CARTESIAN_POINT ('', (7.50000000000001, -2.65, -1.6012));
#816 = CARTESIAN_POINT ('', (7.50000000000001, -2.65, 17.6012));
#817 = CARTESIAN_POINT ('', (5.85000000000001, -2.65, -1.6012));
#818 = CARTESIAN_POINT ('', (5.85000000000001, -2.65, 17.6012));
#819 = CARTESIAN_POINT ('', (5.85000000000001, -1., -1.6012));
#820 = CARTESIAN_POINT ('', (5.85000000000001, -0.999999999999999, 17.6012));
#821 = CARTESIAN_POINT ('', (5.85000000000001, 0.649999999999999, -1.6012));
#822 = CARTESIAN_POINT ('', (5.85000000000001, 0.65, 17.6012));
#823 = CARTESIAN_POINT ('', (7.50000000000001, 0.65, -1.6012));
#824 = CARTESIAN_POINT ('', (7.50000000000001, 0.650000000000001, 17.6012));
#825 = CARTESIAN_POINT ('', (9.15000000000001, 0.650000000000001, -1.6012));
#826 = CARTESIAN_POINT ('', (9.15000000000001, 0.650000000000002, 17.6012));
#827 = CARTESIAN_POINT ('', (9.15000000000001, -0.999999999999999, -1.6012));
#828 = CARTESIAN_POINT ('', (9.15000000000001, -0.999999999999998, 17.6012));
#829 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#811, #812), (#813, #814), (#815, #816), (#817, #818), (#819, #820), (#821, #822), (#823, #824), (#825, #826), (#827, #828)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#830 = ADVANCED_FACE ('', (#810), #829, .T.);
#831 = ORIENTED_EDGE ('', *, *, #270, .F.);
#832 = ORIENTED_EDGE ('', *, *, #295, .F.);
#833 = ORIENTED_EDGE ('', *, *, #140, .F.);
#834 = ORIENTED_EDGE ('', *, *, #718, .T.);
#835 = ORIENTED_EDGE ('', *, *, #666, .T.);
#836 = CARTESIAN_POINT ('', (4.19999999999997, 5., 14.4786796564404));
#837 = CARTESIAN_POINT ('', (2.67867965644034, 5., 16.));
#838 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#836, #837), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#839 = EDGE_CURVE ('', #655, #266, #838, .T.);
#840 = ORIENTED_EDGE ('', *, *, #839, .T.);
#841 = EDGE_LOOP ('', (#831, #832, #833, #834, #835, #840));
#842 = FACE_OUTER_BOUND ('', #841, .T.);
#843 = CARTESIAN_POINT ('', (2.67767965644035, -8.00099999999999, 16.001));
#844 = CARTESIAN_POINT ('', (2.67767965644035, 5.001, 16.001));
#845 = CARTESIAN_POINT ('', (4.501, -8.00099999999999, 14.1776796564403));
#846 = CARTESIAN_POINT ('', (4.501, 5.001, 14.1776796564403));
#847 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#843, #844), (#845, #846)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00141421356237359, 2.57715014485047), (-13.001, 0.00100000000000122), .UNSPECIFIED.);
#848 = ADVANCED_FACE ('', (#842), #847, .T.);
#849 = ORIENTED_EDGE ('', *, *, #277, .T.);
#850 = ORIENTED_EDGE ('', *, *, #839, .F.);
#851 = ORIENTED_EDGE ('', *, *, #659, .F.);
#852 = CARTESIAN_POINT ('', (3.19999999999997, 5., 16.));
#853 = CARTESIAN_POINT ('', (4.19999999999997, 5., 15.));
#854 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#852, #853), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#855 = EDGE_CURVE ('', #273, #653, #854, .T.);
#856 = ORIENTED_EDGE ('', *, *, #855, .F.);
#857 = EDGE_LOOP ('', (#849, #850, #851, #856));
#858 = FACE_OUTER_BOUND ('', #857, .T.);
#859 = CARTESIAN_POINT ('', (4.20099999999998, 5., 16.001));
#860 = CARTESIAN_POINT ('', (4.20099999999998, 5., 14.4776796564404));
#861 = CARTESIAN_POINT ('', (2.67767965644035, 5., 16.001));
#862 = CARTESIAN_POINT ('', (2.67767965644035, 5., 14.4776796564404));
#863 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#859, #860), (#861, #862)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (3.92032034355965, 5.44364068711928), (1.79899999999999, 3.32232034355963), .UNSPECIFIED.);
#864 = ADVANCED_FACE ('', (#858), #863, .T.);
#865 = ORIENTED_EDGE ('', *, *, #855, .T.);
#866 = ORIENTED_EDGE ('', *, *, #699, .T.);
#867 = ORIENTED_EDGE ('', *, *, #240, .T.);
#868 = ORIENTED_EDGE ('', *, *, #282, .T.);
#869 = EDGE_LOOP ('', (#865, #866, #867, #868));
#870 = FACE_OUTER_BOUND ('', #869, .T.);
#871 = CARTESIAN_POINT ('', (3.19899999999997, 4.999, 16.001));
#872 = CARTESIAN_POINT ('', (3.19899999999997, 8.001, 16.001));
#873 = CARTESIAN_POINT ('', (4.20099999999998, 4.999, 14.999));
#874 = CARTESIAN_POINT ('', (4.20099999999998, 8.001, 14.999));
#875 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#871, #872), (#873, #874)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1.41562777593546, 0.00141421356237181), (-3.001, 0.000999999999999446), .UNSPECIFIED.);
#876 = ADVANCED_FACE ('', (#870), #875, .T.);
#877 = CLOSED_SHELL ('', (#65, #117, #163, #200, #249, #291, #326, #394, #406, #434, #480, #504, #543, #565, #597, #620, #651, #708, #741, #775, #789, #803, #830, #848, #864, #876));
#878 = MANIFOLD_SOLID_BREP ('NOCUT', #877);
#879 = COLOUR_RGB ('', 0.75294117647059, 0.75294117647059, 0.75294117647059);
#880 = FILL_AREA_STYLE_COLOUR ('', #879);
#881 = FILL_AREA_STYLE ('', (#880));
#882 = SURFACE_STYLE_FILL_AREA (#881);
#883 = SURFACE_SIDE_STYLE ('', (#882));
#884 = SURFACE_STYLE_USAGE (.POSITIVE., #883);
#885 = PRESENTATION_STYLE_ASSIGNMENT ((#884));
#886 = STYLED_ITEM ('', (#885), #878);
#887 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#888 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#889 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#890 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #887, 'DISTANCE_ACCURACY_VALUE', '');
#891 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#890))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#887, #888, #889))
   REPRESENTATION_CONTEXT ('', '3D')
);
#892 = SHAPE_REPRESENTATION ('', (), #891);
#893 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#894 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #893);
#895 = MECHANICAL_CONTEXT ('', #893, 'mechanical');
#896 = PRODUCT ('', '', '', (#895));
#897 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#898 = PERSON ('', '', $, $, $, $);
#899 = ORGANIZATION ($, '', '');
#900 = PERSON_AND_ORGANIZATION (#898, #899);
#901 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#900, #897, (#896));
#902 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#896));
#903 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #896, .NOT_KNOWN.);
#904 = APPROVAL_STATUS ('approved');
#905 = APPROVAL (#904, '');
#906 = CALENDAR_DATE (2018, 17, 4);
#907 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#908 = LOCAL_TIME (15, 28, 35., #907);
#909 = DATE_AND_TIME (#906, #908);
#910 = APPROVAL_DATE_TIME (#909, #905);
#911 = APPROVAL_ROLE ('');
#912 = PERSON ('', '', $, $, $, $);
#913 = ORGANIZATION ($, '', '');
#914 = PERSON_AND_ORGANIZATION (#912, #913);
#915 = APPROVAL_PERSON_ORGANIZATION (#914, #905, #911);
#916 = CC_DESIGN_APPROVAL (#905, (#903));
#917 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#918 = PERSON ('', '', $, $, $, $);
#919 = ORGANIZATION ($, '', '');
#920 = PERSON_AND_ORGANIZATION (#918, #919);
#921 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#920, #917, (#903));
#922 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#923 = PERSON ('', '', $, $, $, $);
#924 = ORGANIZATION ($, '', '');
#925 = PERSON_AND_ORGANIZATION (#923, #924);
#926 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#925, #922, (#903));
#927 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#928 = SECURITY_CLASSIFICATION ('', '', #927);
#929 = APPROVAL_STATUS ('approved');
#930 = APPROVAL (#929, '');
#931 = CALENDAR_DATE (2018, 17, 4);
#932 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#933 = LOCAL_TIME (15, 28, 35., #932);
#934 = DATE_AND_TIME (#931, #933);
#935 = APPROVAL_DATE_TIME (#934, #930);
#936 = APPROVAL_ROLE ('');
#937 = PERSON ('', '', $, $, $, $);
#938 = ORGANIZATION ($, '', '');
#939 = PERSON_AND_ORGANIZATION (#937, #938);
#940 = APPROVAL_PERSON_ORGANIZATION (#939, #930, #936);
#941 = CC_DESIGN_APPROVAL (#930, (#928));
#942 = DATE_TIME_ROLE ('classification_date');
#943 = CALENDAR_DATE (2018, 17, 4);
#944 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#945 = LOCAL_TIME (15, 28, 35., #944);
#946 = DATE_AND_TIME (#943, #945);
#947 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#946, #942, (#928));
#948 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#949 = PERSON ('', '', $, $, $, $);
#950 = ORGANIZATION ($, '', '');
#951 = PERSON_AND_ORGANIZATION (#949, #950);
#952 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#951, #948, (#928));
#953 = CC_DESIGN_SECURITY_CLASSIFICATION (#928, (#903));
#954 = DESIGN_CONTEXT ('', #893, 'design');
#955 = PRODUCT_DEFINITION ('', '', #903, #954);
#956 = APPROVAL_STATUS ('approved');
#957 = APPROVAL (#956, '');
#958 = CALENDAR_DATE (2018, 17, 4);
#959 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#960 = LOCAL_TIME (15, 28, 35., #959);
#961 = DATE_AND_TIME (#958, #960);
#962 = APPROVAL_DATE_TIME (#961, #957);
#963 = APPROVAL_ROLE ('');
#964 = PERSON ('', '', $, $, $, $);
#965 = ORGANIZATION ($, '', '');
#966 = PERSON_AND_ORGANIZATION (#964, #965);
#967 = APPROVAL_PERSON_ORGANIZATION (#966, #957, #963);
#968 = CC_DESIGN_APPROVAL (#957, (#955));
#969 = DATE_TIME_ROLE ('creation_date');
#970 = CALENDAR_DATE (2018, 17, 4);
#971 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#972 = LOCAL_TIME (15, 28, 35., #971);
#973 = DATE_AND_TIME (#970, #972);
#974 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#973, #969, (#955));
#975 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#976 = PERSON ('', '', $, $, $, $);
#977 = ORGANIZATION ($, '', '');
#978 = PERSON_AND_ORGANIZATION (#976, #977);
#979 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#978, #975, (#955));
#980 = PRODUCT_DEFINITION_SHAPE ('', '', #955);
#981 = SHAPE_DEFINITION_REPRESENTATION (#980, #892);
#982 = SHAPE_REPRESENTATION_RELATIONSHIP ('', '', #892, #983);
#983 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#878), #891);
ENDSEC;
END-ISO-10303-21;