ISO-10303-21;
HEADER;
FILE_DESCRIPTION ((), '1');
FILE_NAME ('C:\\TDMTemp\\Tools\\SMLIB\\holder-r\\HA100\\step\\156101.stp', '2009-12-14T15:24:56', ('Unknown'), ('Unknown'), 'HarmonyWare STEP v1.4.2', 'HarmonyWare Translators', '');
FILE_SCHEMA (('CONFIG_CONTROL_DESIGN'));
ENDSEC;

DATA;
#10 = CARTESIAN_POINT ('', (20., 21., 0.));
#20 = VERTEX_POINT ('', #10);
#30 = CARTESIAN_POINT ('', (20., 21., 0.));
#40 = CARTESIAN_POINT ('', (20., 21., 21.));
#50 = CARTESIAN_POINT ('', (20., 1.28587913910472E-15, 21.));
#60 = CARTESIAN_POINT ('', (20., -21., 21.));
#70 = CARTESIAN_POINT ('', (20., -21., 2.57175827820944E-15));
#80 = CARTESIAN_POINT ('', (20., -21., -21.));
#90 = CARTESIAN_POINT ('', (20., -3.85763741731416E-15, -21.));
#100 = CARTESIAN_POINT ('', (20., 21., -21.));
#110 = CARTESIAN_POINT ('', (20., 21., 0.));
#120 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#30, #40, #50, #60, #70, #80, #90, #100, #110), .UNSPECIFIED., .T., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 2, 3), (0., 32.9867228626928, 65.9734457253857, 98.9601685880785, 131.946891450771), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#130 = EDGE_CURVE ('', #20, #20, #120, .T.);
#140 = ORIENTED_EDGE ('', *, *, #130, .T.);
#150 = EDGE_LOOP ('', (#140));
#160 = FACE_OUTER_BOUND ('', #150, .T.);
#170 = CARTESIAN_POINT ('', (20., 15., 0.));
#180 = VERTEX_POINT ('', #170);
#190 = CARTESIAN_POINT ('', (20., 15., 0.));
#200 = CARTESIAN_POINT ('', (20., 15., 15.));
#210 = CARTESIAN_POINT ('', (20., 2.41728618260448E-15, 15.));
#220 = CARTESIAN_POINT ('', (20., -15., 15.));
#230 = CARTESIAN_POINT ('', (20., -15., 6.27786229722166E-15));
#240 = CARTESIAN_POINT ('', (20., -15., -15.));
#250 = CARTESIAN_POINT ('', (20., -5.69754631333821E-15, -15.));
#260 = CARTESIAN_POINT ('', (20., 15., -15.));
#270 = CARTESIAN_POINT ('', (20., 15., 0.));
#280 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#190, #200, #210, #220, #230, #240, #250, #260, #270), .UNSPECIFIED., .T., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 2, 3), (0., 0.25, 0.5, 0.75, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#290 = EDGE_CURVE ('', #180, #180, #280, .T.);
#300 = ORIENTED_EDGE ('', *, *, #290, .F.);
#310 = EDGE_LOOP ('', (#300));
#320 = FACE_BOUND ('', #310, .T.);
#330 = CARTESIAN_POINT ('', (20., -21., -21.));
#340 = CARTESIAN_POINT ('', (20., -21., 21.));
#350 = CARTESIAN_POINT ('', (20., 21., -21.));
#360 = CARTESIAN_POINT ('', (20., 21., 21.));
#370 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#330, #340), (#350, #360)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.0454545454545453, 0.954545454545454), (0.0454545454545452, 0.954545454545454), .UNSPECIFIED.);
#380 = ADVANCED_FACE ('', (#160, #320), #370, .T.);
#390 = CARTESIAN_POINT ('', (0., 21., 0.));
#400 = VERTEX_POINT ('', #390);
#410 = CARTESIAN_POINT ('', (0., 21., 0.));
#420 = CARTESIAN_POINT ('', (20., 21., 0.));
#430 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#410, #420), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#440 = EDGE_CURVE ('', #400, #20, #430, .T.);
#450 = ORIENTED_EDGE ('', *, *, #440, .F.);
#460 = CARTESIAN_POINT ('', (0., 21., 0.));
#470 = CARTESIAN_POINT ('', (0., 21., 21.));
#480 = CARTESIAN_POINT ('', (0., 1.28587913910472E-15, 21.));
#490 = CARTESIAN_POINT ('', (0., -21., 21.));
#500 = CARTESIAN_POINT ('', (0., -21., 2.57175827820944E-15));
#510 = CARTESIAN_POINT ('', (0., -21., -21.));
#520 = CARTESIAN_POINT ('', (0., -3.85763741731416E-15, -21.));
#530 = CARTESIAN_POINT ('', (0., 21., -21.));
#540 = CARTESIAN_POINT ('', (0., 21., 0.));
#550 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#460, #470, #480, #490, #500, #510, #520, #530, #540), .UNSPECIFIED., .T., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 2, 3), (0., 0.25, 0.5, 0.75, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#560 = EDGE_CURVE ('', #400, #400, #550, .T.);
#570 = ORIENTED_EDGE ('', *, *, #560, .T.);
#580 = ORIENTED_EDGE ('', *, *, #440, .T.);
#590 = ORIENTED_EDGE ('', *, *, #130, .F.);
#600 = EDGE_LOOP ('', (#450, #570, #580, #590));
#610 = FACE_OUTER_BOUND ('', #600, .T.);
#620 = CARTESIAN_POINT ('', (0., 21., 0.));
#630 = CARTESIAN_POINT ('', (20., 21., 0.));
#640 = CARTESIAN_POINT ('', (0., 21., 21.));
#650 = CARTESIAN_POINT ('', (20., 21., 21.));
#660 = CARTESIAN_POINT ('', (0., 1.28587913910472E-15, 21.));
#670 = CARTESIAN_POINT ('', (20., 1.28587913910472E-15, 21.));
#680 = CARTESIAN_POINT ('', (0., -21., 21.));
#690 = CARTESIAN_POINT ('', (20., -21., 21.));
#700 = CARTESIAN_POINT ('', (0., -21., 2.57175827820944E-15));
#710 = CARTESIAN_POINT ('', (20., -21., 2.57175827820944E-15));
#720 = CARTESIAN_POINT ('', (0., -21., -21.));
#730 = CARTESIAN_POINT ('', (20., -21., -21.));
#740 = CARTESIAN_POINT ('', (0., -3.85763741731416E-15, -21.));
#750 = CARTESIAN_POINT ('', (20., -3.85763741731416E-15, -21.));
#760 = CARTESIAN_POINT ('', (0., 21., -21.));
#770 = CARTESIAN_POINT ('', (20., 21., -21.));
#780 = CARTESIAN_POINT ('', (0., 21., 0.));
#790 = CARTESIAN_POINT ('', (20., 21., 0.));
#800 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#620, #630), (#640, #650), (#660, #670), (#680, #690), (#700, #710), (#720, #730), (#740, #750), (#760, #770), (#780, #790)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 32.9867228626928, 65.9734457253857, 98.9601685880785, 131.946891450771), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#810 = ADVANCED_FACE ('', (#610), #800, .T.);
#820 = ORIENTED_EDGE ('', *, *, #560, .F.);
#830 = EDGE_LOOP ('', (#820));
#840 = FACE_OUTER_BOUND ('', #830, .T.);
#850 = CARTESIAN_POINT ('', (0., 8., 0.));
#860 = VERTEX_POINT ('', #850);
#870 = CARTESIAN_POINT ('', (0., 8., 0.));
#880 = CARTESIAN_POINT ('', (0., 8., 8.));
#890 = CARTESIAN_POINT ('', (0., 4.89858719658941E-16, 8.));
#900 = CARTESIAN_POINT ('', (0., -8., 8.));
#910 = CARTESIAN_POINT ('', (0., -8., 9.79717439317883E-16));
#920 = CARTESIAN_POINT ('', (0., -8., -8.));
#930 = CARTESIAN_POINT ('', (0., -1.46957615897682E-15, -8.));
#940 = CARTESIAN_POINT ('', (0., 8., -8.));
#950 = CARTESIAN_POINT ('', (0., 8., 0.));
#960 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#870, #880, #890, #900, #910, #920, #930, #940, #950), .UNSPECIFIED., .T., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 2, 3), (0., 0.25, 0.5, 0.75, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#970 = EDGE_CURVE ('', #860, #860, #960, .T.);
#980 = ORIENTED_EDGE ('', *, *, #970, .T.);
#990 = EDGE_LOOP ('', (#980));
#1000 = FACE_BOUND ('', #990, .T.);
#1010 = CARTESIAN_POINT ('', (0., -21., -21.));
#1020 = CARTESIAN_POINT ('', (0., 21., -21.));
#1030 = CARTESIAN_POINT ('', (0., -21., 21.));
#1040 = CARTESIAN_POINT ('', (0., 21., 21.));
#1050 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1010, #1020), (#1030, #1040)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.0454545454545454, 0.954545454545454), (0.0454545454545454, 0.954545454545454), .UNSPECIFIED.);
#1060 = ADVANCED_FACE ('', (#840, #1000), #1050, .T.);
#1070 = CARTESIAN_POINT ('', (-39.2, 8., 0.));
#1080 = VERTEX_POINT ('', #1070);
#1090 = CARTESIAN_POINT ('', (-40., 7.2, 0.));
#1100 = VERTEX_POINT ('', #1090);
#1110 = CARTESIAN_POINT ('', (-39.2, 8., 0.));
#1120 = CARTESIAN_POINT ('', (-40., 7.2, 0.));
#1130 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#1110, #1120), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#1140 = EDGE_CURVE ('', #1080, #1100, #1130, .T.);
#1150 = ORIENTED_EDGE ('', *, *, #1140, .T.);
#1160 = CARTESIAN_POINT ('', (-40., 7.2, 0.));
#1170 = CARTESIAN_POINT ('', (-40., 7.2, 7.2));
#1180 = CARTESIAN_POINT ('', (-40., 4.40872847693047E-16, 7.2));
#1190 = CARTESIAN_POINT ('', (-40., -7.2, 7.2));
#1200 = CARTESIAN_POINT ('', (-40., -7.2, 8.81745695386094E-16));
#1210 = CARTESIAN_POINT ('', (-40., -7.2, -7.2));
#1220 = CARTESIAN_POINT ('', (-40., -1.32261854307914E-15, -7.2));
#1230 = CARTESIAN_POINT ('', (-40., 7.2, -7.2));
#1240 = CARTESIAN_POINT ('', (-40., 7.2, 0.));
#1250 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1160, #1170, #1180, #1190, #1200, #1210, #1220, #1230, #1240), .UNSPECIFIED., .T., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 2, 3), (0., 0.25, 0.5, 0.75, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#1260 = EDGE_CURVE ('', #1100, #1100, #1250, .T.);
#1270 = ORIENTED_EDGE ('', *, *, #1260, .T.);
#1280 = ORIENTED_EDGE ('', *, *, #1140, .F.);
#1290 = CARTESIAN_POINT ('', (-39.2, 8., 0.));
#1300 = CARTESIAN_POINT ('', (-39.2, 8., 8.));
#1310 = CARTESIAN_POINT ('', (-39.2, 4.89858719658941E-16, 8.));
#1320 = CARTESIAN_POINT ('', (-39.2, -8., 8.));
#1330 = CARTESIAN_POINT ('', (-39.2, -8., 9.79717439317883E-16));
#1340 = CARTESIAN_POINT ('', (-39.2, -8., -8.));
#1350 = CARTESIAN_POINT ('', (-39.2, -1.46957615897682E-15, -8.));
#1360 = CARTESIAN_POINT ('', (-39.2, 8., -8.));
#1370 = CARTESIAN_POINT ('', (-39.2, 8., 0.));
#1380 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1290, #1300, #1310, #1320, #1330, #1340, #1350, #1360, #1370), .UNSPECIFIED., .T., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 2, 3), (0., 12.5663706143592, 25.1327412287183, 37.6991118430775, 50.2654824574367), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#1390 = EDGE_CURVE ('', #1080, #1080, #1380, .T.);
#1400 = ORIENTED_EDGE ('', *, *, #1390, .F.);
#1410 = EDGE_LOOP ('', (#1150, #1270, #1280, #1400));
#1420 = FACE_OUTER_BOUND ('', #1410, .T.);
#1430 = CARTESIAN_POINT ('', (-39.2, 8., 0.));
#1440 = CARTESIAN_POINT ('', (-39.2, 8., 8.));
#1450 = CARTESIAN_POINT ('', (-39.2, 4.89858719658941E-16, 8.));
#1460 = CARTESIAN_POINT ('', (-39.2, -8., 8.));
#1470 = CARTESIAN_POINT ('', (-39.2, -8., 9.79717439317883E-16));
#1480 = CARTESIAN_POINT ('', (-39.2, -8., -8.));
#1490 = CARTESIAN_POINT ('', (-39.2, -1.46957615897682E-15, -8.));
#1500 = CARTESIAN_POINT ('', (-39.2, 8., -8.));
#1510 = CARTESIAN_POINT ('', (-39.2, 8., 0.));
#1520 = CARTESIAN_POINT ('', (-40., 7.2, 0.));
#1530 = CARTESIAN_POINT ('', (-40., 7.2, 7.2));
#1540 = CARTESIAN_POINT ('', (-40., 4.40872847693047E-16, 7.2));
#1550 = CARTESIAN_POINT ('', (-40., -7.2, 7.2));
#1560 = CARTESIAN_POINT ('', (-40., -7.2, 8.81745695386094E-16));
#1570 = CARTESIAN_POINT ('', (-40., -7.2, -7.2));
#1580 = CARTESIAN_POINT ('', (-40., -1.32261854307914E-15, -7.2));
#1590 = CARTESIAN_POINT ('', (-40., 7.2, -7.2));
#1600 = CARTESIAN_POINT ('', (-40., 7.2, 0.));
#1610 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#1430, #1440, #1450, #1460, #1470, #1480, #1490, #1500, #1510), (#1520, #1530, #1540, #1550, #1560, #1570, #1580, #1590, #1600)), .UNSPECIFIED., .F., .T., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 2, 2, 2, 3), (0., 1.), (0., 0.25, 0.5, 0.75, 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.), (1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.)))
   REPRESENTATION_ITEM ('')
);
#1620 = ADVANCED_FACE ('', (#1420), #1610, .T.);
#1630 = ORIENTED_EDGE ('', *, *, #1260, .F.);
#1640 = EDGE_LOOP ('', (#1630));
#1650 = FACE_OUTER_BOUND ('', #1640, .T.);
#1660 = CARTESIAN_POINT ('', (-40., 5.25, 0.));
#1670 = VERTEX_POINT ('', #1660);
#1680 = CARTESIAN_POINT ('', (-40., 5.25, 0.));
#1690 = CARTESIAN_POINT ('', (-40., 5.25, 5.25));
#1700 = CARTESIAN_POINT ('', (-40., 3.2146978477618E-16, 5.25));
#1710 = CARTESIAN_POINT ('', (-40., -5.25, 5.25));
#1720 = CARTESIAN_POINT ('', (-40., -5.25, 6.4293956955236E-16));
#1730 = CARTESIAN_POINT ('', (-40., -5.25, -5.25));
#1740 = CARTESIAN_POINT ('', (-40., -9.64409354328541E-16, -5.25));
#1750 = CARTESIAN_POINT ('', (-40., 5.25, -5.25));
#1760 = CARTESIAN_POINT ('', (-40., 5.25, 0.));
#1770 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1680, #1690, #1700, #1710, #1720, #1730, #1740, #1750, #1760), .UNSPECIFIED., .T., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 2, 3), (0., 8.24668071567321, 16.4933614313464, 24.7400421470196, 32.9867228626928), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#1780 = EDGE_CURVE ('', #1670, #1670, #1770, .T.);
#1790 = ORIENTED_EDGE ('', *, *, #1780, .T.);
#1800 = EDGE_LOOP ('', (#1790));
#1810 = FACE_BOUND ('', #1800, .T.);
#1820 = CARTESIAN_POINT ('', (-40., -7.2, -7.2));
#1830 = CARTESIAN_POINT ('', (-40., 7.2, -7.2));
#1840 = CARTESIAN_POINT ('', (-40., -7.2, 7.2));
#1850 = CARTESIAN_POINT ('', (-40., 7.2, 7.2));
#1860 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1820, #1830), (#1840, #1850)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.0454545454545454, 0.954545454545455), (0.0454545454545454, 0.954545454545454), .UNSPECIFIED.);
#1870 = ADVANCED_FACE ('', (#1650, #1810), #1860, .T.);
#1880 = CARTESIAN_POINT ('', (0., 8., 0.));
#1890 = CARTESIAN_POINT ('', (-39.2, 8., 0.));
#1900 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#1880, #1890), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#1910 = EDGE_CURVE ('', #860, #1080, #1900, .T.);
#1920 = ORIENTED_EDGE ('', *, *, #1910, .T.);
#1930 = ORIENTED_EDGE ('', *, *, #1390, .T.);
#1940 = ORIENTED_EDGE ('', *, *, #1910, .F.);
#1950 = ORIENTED_EDGE ('', *, *, #970, .F.);
#1960 = EDGE_LOOP ('', (#1920, #1930, #1940, #1950));
#1970 = FACE_OUTER_BOUND ('', #1960, .T.);
#1980 = CARTESIAN_POINT ('', (0., 8., 0.));
#1990 = CARTESIAN_POINT ('', (0., 8., 8.));
#2000 = CARTESIAN_POINT ('', (0., 4.89858719658941E-16, 8.));
#2010 = CARTESIAN_POINT ('', (0., -8., 8.));
#2020 = CARTESIAN_POINT ('', (0., -8., 9.79717439317883E-16));
#2030 = CARTESIAN_POINT ('', (0., -8., -8.));
#2040 = CARTESIAN_POINT ('', (0., -1.46957615897682E-15, -8.));
#2050 = CARTESIAN_POINT ('', (0., 8., -8.));
#2060 = CARTESIAN_POINT ('', (0., 8., 0.));
#2070 = CARTESIAN_POINT ('', (-39.2, 8., 0.));
#2080 = CARTESIAN_POINT ('', (-39.2, 8., 8.));
#2090 = CARTESIAN_POINT ('', (-39.2, 4.89858719658941E-16, 8.));
#2100 = CARTESIAN_POINT ('', (-39.2, -8., 8.));
#2110 = CARTESIAN_POINT ('', (-39.2, -8., 9.79717439317883E-16));
#2120 = CARTESIAN_POINT ('', (-39.2, -8., -8.));
#2130 = CARTESIAN_POINT ('', (-39.2, -1.46957615897682E-15, -8.));
#2140 = CARTESIAN_POINT ('', (-39.2, 8., -8.));
#2150 = CARTESIAN_POINT ('', (-39.2, 8., 0.));
#2160 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#1980, #1990, #2000, #2010, #2020, #2030, #2040, #2050, #2060), (#2070, #2080, #2090, #2100, #2110, #2120, #2130, #2140, #2150)), .UNSPECIFIED., .F., .T., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 2, 2, 2, 3), (0., 1.), (0., 12.5663706143592, 25.1327412287183, 37.6991118430775, 50.2654824574367), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.), (1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.)))
   REPRESENTATION_ITEM ('')
);
#2170 = ADVANCED_FACE ('', (#1970), #2160, .T.);
#2180 = ORIENTED_EDGE ('', *, *, #290, .T.);
#2190 = CARTESIAN_POINT ('', (9., 15., 0.));
#2200 = VERTEX_POINT ('', #2190);
#2210 = CARTESIAN_POINT ('', (20., 15., 0.));
#2220 = CARTESIAN_POINT ('', (9., 15., 0.));
#2230 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2210, #2220), .UNSPECIFIED., .F., .U., (2, 2), (4.54524794326616E-5, 1.), .UNSPECIFIED.);
#2240 = EDGE_CURVE ('', #180, #2200, #2230, .T.);
#2250 = ORIENTED_EDGE ('', *, *, #2240, .T.);
#2260 = CARTESIAN_POINT ('', (9., 15., 0.));
#2270 = CARTESIAN_POINT ('', (9., 15., 15.));
#2280 = CARTESIAN_POINT ('', (9., 9.18485099360515E-16, 15.));
#2290 = CARTESIAN_POINT ('', (9., -15., 15.));
#2300 = CARTESIAN_POINT ('', (9., -15., 1.83697019872103E-15));
#2310 = CARTESIAN_POINT ('', (9., -15., -15.));
#2320 = CARTESIAN_POINT ('', (9., -2.75545529808154E-15, -15.));
#2330 = CARTESIAN_POINT ('', (9., 15., -15.));
#2340 = CARTESIAN_POINT ('', (9., 15., 0.));
#2350 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2260, #2270, #2280, #2290, #2300, #2310, #2320, #2330, #2340), .UNSPECIFIED., .T., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 2, 3), (0., 23.5619449019234, 47.1238898038469, 70.6858347057704, 94.2477796076938), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#2360 = EDGE_CURVE ('', #2200, #2200, #2350, .T.);
#2370 = ORIENTED_EDGE ('', *, *, #2360, .F.);
#2380 = ORIENTED_EDGE ('', *, *, #2240, .F.);
#2390 = EDGE_LOOP ('', (#2180, #2250, #2370, #2380));
#2400 = FACE_OUTER_BOUND ('', #2390, .T.);
#2410 = CARTESIAN_POINT ('', (20., 15., 0.));
#2420 = CARTESIAN_POINT ('', (9., 15., 0.));
#2430 = CARTESIAN_POINT ('', (20., 15., 15.));
#2440 = CARTESIAN_POINT ('', (9., 15., 15.));
#2450 = CARTESIAN_POINT ('', (20., 9.18485099360515E-16, 15.));
#2460 = CARTESIAN_POINT ('', (9., 9.18485099360515E-16, 15.));
#2470 = CARTESIAN_POINT ('', (20., -15., 15.));
#2480 = CARTESIAN_POINT ('', (9., -15., 15.));
#2490 = CARTESIAN_POINT ('', (20., -15., 1.83697019872103E-15));
#2500 = CARTESIAN_POINT ('', (9., -15., 1.83697019872103E-15));
#2510 = CARTESIAN_POINT ('', (20., -15., -15.));
#2520 = CARTESIAN_POINT ('', (9., -15., -15.));
#2530 = CARTESIAN_POINT ('', (20., -2.75545529808154E-15, -15.));
#2540 = CARTESIAN_POINT ('', (9., -2.75545529808154E-15, -15.));
#2550 = CARTESIAN_POINT ('', (20., 15., -15.));
#2560 = CARTESIAN_POINT ('', (9., 15., -15.));
#2570 = CARTESIAN_POINT ('', (20., 15., 0.));
#2580 = CARTESIAN_POINT ('', (9., 15., 0.));
#2590 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#2410, #2420), (#2430, #2440), (#2450, #2460), (#2470, #2480), (#2490, #2500), (#2510, #2520), (#2530, #2540), (#2550, #2560), (#2570, #2580)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 23.5619449019234, 47.1238898038469, 70.6858347057704, 94.2477796076938), (4.54524794329947E-5, 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#2600 = ADVANCED_FACE ('', (#2400), #2590, .T.);
#2610 = ORIENTED_EDGE ('', *, *, #2360, .T.);
#2620 = EDGE_LOOP ('', (#2610));
#2630 = FACE_OUTER_BOUND ('', #2620, .T.);
#2640 = CARTESIAN_POINT ('', (9., 5.25, 0.));
#2650 = VERTEX_POINT ('', #2640);
#2660 = CARTESIAN_POINT ('', (9., 5.25, 0.));
#2670 = CARTESIAN_POINT ('', (9., 5.25, 5.25));
#2680 = CARTESIAN_POINT ('', (9., 3.2146978477618E-16, 5.25));
#2690 = CARTESIAN_POINT ('', (9., -5.25, 5.25));
#2700 = CARTESIAN_POINT ('', (9., -5.25, 6.4293956955236E-16));
#2710 = CARTESIAN_POINT ('', (9., -5.25, -5.25));
#2720 = CARTESIAN_POINT ('', (9., -9.64409354328541E-16, -5.25));
#2730 = CARTESIAN_POINT ('', (9., 5.25, -5.25));
#2740 = CARTESIAN_POINT ('', (9., 5.25, 0.));
#2750 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2660, #2670, #2680, #2690, #2700, #2710, #2720, #2730, #2740), .UNSPECIFIED., .T., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 2, 3), (0., 0.25, 0.5, 0.75, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#2760 = EDGE_CURVE ('', #2650, #2650, #2750, .T.);
#2770 = ORIENTED_EDGE ('', *, *, #2760, .F.);
#2780 = EDGE_LOOP ('', (#2770));
#2790 = FACE_BOUND ('', #2780, .T.);
#2800 = CARTESIAN_POINT ('', (9., -15., -15.));
#2810 = CARTESIAN_POINT ('', (9., -15., 15.));
#2820 = CARTESIAN_POINT ('', (9., 15., -15.));
#2830 = CARTESIAN_POINT ('', (9., 15., 15.));
#2840 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2800, #2810), (#2820, #2830)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.0454545454545453, 0.954545454545454), (0.0454545454545451, 0.954545454545455), .UNSPECIFIED.);
#2850 = ADVANCED_FACE ('', (#2630, #2790), #2840, .T.);
#2860 = CARTESIAN_POINT ('', (9., 5.25, 0.));
#2870 = CARTESIAN_POINT ('', (-40., 5.25, 0.));
#2880 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#2860, #2870), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#2890 = EDGE_CURVE ('', #2650, #1670, #2880, .T.);
#2900 = ORIENTED_EDGE ('', *, *, #2890, .F.);
#2910 = ORIENTED_EDGE ('', *, *, #2760, .T.);
#2920 = ORIENTED_EDGE ('', *, *, #2890, .T.);
#2930 = ORIENTED_EDGE ('', *, *, #1780, .F.);
#2940 = EDGE_LOOP ('', (#2900, #2910, #2920, #2930));
#2950 = FACE_OUTER_BOUND ('', #2940, .T.);
#2960 = CARTESIAN_POINT ('', (9., 5.25, 0.));
#2970 = CARTESIAN_POINT ('', (-40., 5.25, 0.));
#2980 = CARTESIAN_POINT ('', (9., 5.25, 5.25));
#2990 = CARTESIAN_POINT ('', (-40., 5.25, 5.25));
#3000 = CARTESIAN_POINT ('', (9., 3.2146978477618E-16, 5.25));
#3010 = CARTESIAN_POINT ('', (-40., 3.2146978477618E-16, 5.25));
#3020 = CARTESIAN_POINT ('', (9., -5.25, 5.25));
#3030 = CARTESIAN_POINT ('', (-40., -5.25, 5.25));
#3040 = CARTESIAN_POINT ('', (9., -5.25, 6.4293956955236E-16));
#3050 = CARTESIAN_POINT ('', (-40., -5.25, 6.4293956955236E-16));
#3060 = CARTESIAN_POINT ('', (9., -5.25, -5.25));
#3070 = CARTESIAN_POINT ('', (-40., -5.25, -5.25));
#3080 = CARTESIAN_POINT ('', (9., -9.64409354328541E-16, -5.25));
#3090 = CARTESIAN_POINT ('', (-40., -9.64409354328541E-16, -5.25));
#3100 = CARTESIAN_POINT ('', (9., 5.25, -5.25));
#3110 = CARTESIAN_POINT ('', (-40., 5.25, -5.25));
#3120 = CARTESIAN_POINT ('', (9., 5.25, 0.));
#3130 = CARTESIAN_POINT ('', (-40., 5.25, 0.));
#3140 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#2960, #2970), (#2980, #2990), (#3000, #3010), (#3020, #3030), (#3040, #3050), (#3060, #3070), (#3080, #3090), (#3100, #3110), (#3120, #3130)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 8.24668071567321, 16.4933614313464, 24.7400421470196, 32.9867228626928), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#3150 = ADVANCED_FACE ('', (#2950), #3140, .T.);
#3160 = CLOSED_SHELL ('', (#380, #810, #1060, #1620, #1870, #2170, #2600, #2850, #3150));
#3170 = MANIFOLD_SOLID_BREP ('', #3160);
#3180 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#3190 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#3200 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#3210 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #3180, 'DISTANCE_ACCURACY_VALUE', '');
#3220 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#3210))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#3180, #3190, #3200))
   REPRESENTATION_CONTEXT ('', '3D')
);
#3230 = COLOUR_RGB ('', 0.71764705882353, 0.71764705882353, 0.71764705882353);
#3240 = FILL_AREA_STYLE_COLOUR ('', #3230);
#3250 = FILL_AREA_STYLE ('', (#3240));
#3260 = SURFACE_STYLE_FILL_AREA (#3250);
#3270 = SURFACE_SIDE_STYLE ('', (#3260));
#3280 = SURFACE_STYLE_USAGE (.POSITIVE., #3270);
#3290 = PRESENTATION_STYLE_ASSIGNMENT ((#3280));
#3300 = STYLED_ITEM ('', (#3290), #3170);
#3310 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#3170), #3220);
#3320 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#3330 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #3320);
#3340 = MECHANICAL_CONTEXT ('', #3320, 'mechanical');
#3350 = PRODUCT ('product-name', '', '', (#3340));
#3360 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#3370 = PERSON ('', '', $, $, $, $);
#3380 = ORGANIZATION ($, '', '');
#3390 = PERSON_AND_ORGANIZATION (#3370, #3380);
#3400 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#3390, #3360, (#3350));
#3410 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#3350));
#3420 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #3350, .NOT_KNOWN.);
#3430 = APPROVAL_STATUS ('approved');
#3440 = APPROVAL (#3430, '');
#3450 = CALENDAR_DATE (2009, 14, 12);
#3460 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#3470 = LOCAL_TIME (15, 24, 56., #3460);
#3480 = DATE_AND_TIME (#3450, #3470);
#3490 = APPROVAL_DATE_TIME (#3480, #3440);
#3500 = APPROVAL_ROLE ('');
#3510 = PERSON ('', '', $, $, $, $);
#3520 = ORGANIZATION ($, '', '');
#3530 = PERSON_AND_ORGANIZATION (#3510, #3520);
#3540 = APPROVAL_PERSON_ORGANIZATION (#3530, #3440, #3500);
#3550 = CC_DESIGN_APPROVAL (#3440, (#3420));
#3560 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#3570 = PERSON ('', '', $, $, $, $);
#3580 = ORGANIZATION ($, '', '');
#3590 = PERSON_AND_ORGANIZATION (#3570, #3580);
#3600 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#3590, #3560, (#3420));
#3610 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#3620 = PERSON ('', '', $, $, $, $);
#3630 = ORGANIZATION ($, '', '');
#3640 = PERSON_AND_ORGANIZATION (#3620, #3630);
#3650 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#3640, #3610, (#3420));
#3660 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#3670 = SECURITY_CLASSIFICATION ('', '', #3660);
#3680 = APPROVAL_STATUS ('approved');
#3690 = APPROVAL (#3680, '');
#3700 = CALENDAR_DATE (2009, 14, 12);
#3710 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#3720 = LOCAL_TIME (15, 24, 56., #3710);
#3730 = DATE_AND_TIME (#3700, #3720);
#3740 = APPROVAL_DATE_TIME (#3730, #3690);
#3750 = APPROVAL_ROLE ('');
#3760 = PERSON ('', '', $, $, $, $);
#3770 = ORGANIZATION ($, '', '');
#3780 = PERSON_AND_ORGANIZATION (#3760, #3770);
#3790 = APPROVAL_PERSON_ORGANIZATION (#3780, #3690, #3750);
#3800 = CC_DESIGN_APPROVAL (#3690, (#3670));
#3810 = DATE_TIME_ROLE ('classification_date');
#3820 = CALENDAR_DATE (2009, 14, 12);
#3830 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#3840 = LOCAL_TIME (15, 24, 56., #3830);
#3850 = DATE_AND_TIME (#3820, #3840);
#3860 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#3850, #3810, (#3670));
#3870 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#3880 = PERSON ('', '', $, $, $, $);
#3890 = ORGANIZATION ($, '', '');
#3900 = PERSON_AND_ORGANIZATION (#3880, #3890);
#3910 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#3900, #3870, (#3670));
#3920 = CC_DESIGN_SECURITY_CLASSIFICATION (#3670, (#3420));
#3930 = DESIGN_CONTEXT ('', #3320, 'design');
#3940 = PRODUCT_DEFINITION ('', '', #3420, #3930);
#3950 = APPROVAL_STATUS ('approved');
#3960 = APPROVAL (#3950, '');
#3970 = CALENDAR_DATE (2009, 14, 12);
#3980 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#3990 = LOCAL_TIME (15, 24, 56., #3980);
#4000 = DATE_AND_TIME (#3970, #3990);
#4010 = APPROVAL_DATE_TIME (#4000, #3960);
#4020 = APPROVAL_ROLE ('');
#4030 = PERSON ('', '', $, $, $, $);
#4040 = ORGANIZATION ($, '', '');
#4050 = PERSON_AND_ORGANIZATION (#4030, #4040);
#4060 = APPROVAL_PERSON_ORGANIZATION (#4050, #3960, #4020);
#4070 = CC_DESIGN_APPROVAL (#3960, (#3940));
#4080 = DATE_TIME_ROLE ('creation_date');
#4090 = CALENDAR_DATE (2009, 14, 12);
#4100 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#4110 = LOCAL_TIME (15, 24, 56., #4100);
#4120 = DATE_AND_TIME (#4090, #4110);
#4130 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#4120, #4080, (#3940));
#4140 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#4150 = PERSON ('', '', $, $, $, $);
#4160 = ORGANIZATION ($, '', '');
#4170 = PERSON_AND_ORGANIZATION (#4150, #4160);
#4180 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#4170, #4140, (#3940));
#4190 = PRODUCT_DEFINITION_SHAPE ('', '', #3940);
#4200 = SHAPE_DEFINITION_REPRESENTATION (#4190, #3310);
ENDSEC;
END-ISO-10303-21;