ISO-10303-21;
HEADER;
FILE_DESCRIPTION ((), '1');
FILE_NAME ('C:\\TDMTemp\\Tools\\SMLIB\\inserts\\D\\step\\DCGT 11T302FN-ALU AT10.stp', '2011-04-26T09:35:39', ('Unknown'), ('Unknown'), 'HarmonyWare STEP v1.4.6', 'HarmonyWare Translators', '');
FILE_SCHEMA (('CONFIG_CONTROL_DESIGN'));
ENDSEC;

DATA;
#10 = CARTESIAN_POINT ('', (0.936413655905565, 0.487454706784531, -3.97));
#20 = VERTEX_POINT ('', #10);
#30 = CARTESIAN_POINT ('', (11.3741310268705, 0.487454706784531, -3.97));
#40 = VERTEX_POINT ('', #30);
#50 = CARTESIAN_POINT ('', (0.936413655905565, 0.487454706784531, -3.97));
#60 = CARTESIAN_POINT ('', (11.3741310268705, 0.487454706784531, -3.97));
#70 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#50, #60), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#80 = EDGE_CURVE ('', #20, #40, #70, .T.);
#90 = ORIENTED_EDGE ('', *, *, #80, .F.);
#100 = CARTESIAN_POINT ('', (6.92366504532689, 9.03754529321547, -3.97));
#110 = VERTEX_POINT ('', #100);
#120 = CARTESIAN_POINT ('', (6.92366504532689, 9.03754529321547, -3.97));
#130 = CARTESIAN_POINT ('', (0.936413655905566, 0.487454706784532, -3.97));
#140 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#120, #130), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#150 = EDGE_CURVE ('', #110, #20, #140, .T.);
#160 = ORIENTED_EDGE ('', *, *, #150, .F.);
#170 = CARTESIAN_POINT ('', (17.3613824162919, 9.03754529321547, -3.97));
#180 = VERTEX_POINT ('', #170);
#190 = CARTESIAN_POINT ('', (17.3613824162919, 9.03754529321547, -3.97));
#200 = CARTESIAN_POINT ('', (6.92366504532689, 9.03754529321547, -3.97));
#210 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#190, #200), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#220 = EDGE_CURVE ('', #180, #110, #210, .T.);
#230 = ORIENTED_EDGE ('', *, *, #220, .F.);
#240 = CARTESIAN_POINT ('', (11.3741310268705, 0.487454706784531, -3.97));
#250 = CARTESIAN_POINT ('', (17.3613824162919, 9.03754529321547, -3.97));
#260 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#240, #250), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#270 = EDGE_CURVE ('', #40, #180, #260, .T.);
#280 = ORIENTED_EDGE ('', *, *, #270, .F.);
#290 = EDGE_LOOP ('', (#90, #160, #230, #280));
#300 = FACE_OUTER_BOUND ('', #290, .T.);
#310 = CARTESIAN_POINT ('', (17.3613824162919, 0.487454706784531, -3.97));
#320 = CARTESIAN_POINT ('', (17.3613824162919, 9.03754529321547, -3.97));
#330 = CARTESIAN_POINT ('', (0.936413655905564, 0.487454706784531, -3.97));
#340 = CARTESIAN_POINT ('', (0.936413655905564, 9.03754529321547, -3.97));
#350 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#310, #320), (#330, #340)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.0968111769267777, 0.903188823073222), (0.290118263784664, 0.709881736215336), .UNSPECIFIED.);
#360 = ADVANCED_FACE ('', (#300), #350, .T.);
#370 = ORIENTED_EDGE ('', *, *, #150, .T.);
#380 = CARTESIAN_POINT ('', (0.220366016536435, 0.314715287270209, 0.));
#390 = VERTEX_POINT ('', #380);
#400 = CARTESIAN_POINT ('', (0.220366016536435, 0.314715287270209, 0.));
#410 = CARTESIAN_POINT ('', (0.936413655905565, 0.487454706784531, -3.97));
#420 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#400, #410), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#430 = EDGE_CURVE ('', #390, #20, #420, .T.);
#440 = ORIENTED_EDGE ('', *, *, #430, .F.);
#450 = CARTESIAN_POINT ('', (6.6102011154971, 9.43971528727021, 0.));
#460 = VERTEX_POINT ('', #450);
#470 = CARTESIAN_POINT ('', (6.6102011154971, 9.43971528727021, 0.));
#480 = CARTESIAN_POINT ('', (0.220366016536436, 0.314715287270209, 0.));
#490 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#470, #480), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#500 = EDGE_CURVE ('', #460, #390, #490, .T.);
#510 = ORIENTED_EDGE ('', *, *, #500, .F.);
#520 = CARTESIAN_POINT ('', (6.6102011154971, 9.43971528727021, 0.));
#530 = CARTESIAN_POINT ('', (6.92366504532689, 9.03754529321547, -3.97));
#540 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#520, #530), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#550 = EDGE_CURVE ('', #460, #110, #540, .T.);
#560 = ORIENTED_EDGE ('', *, *, #550, .T.);
#570 = EDGE_LOOP ('', (#370, #440, #510, #560));
#580 = FACE_OUTER_BOUND ('', #570, .T.);
#590 = CARTESIAN_POINT ('', (6.92366504532689, 9.03754529321547, -3.97));
#600 = CARTESIAN_POINT ('', (6.6102011154971, 9.43971528727021, 0.));
#610 = CARTESIAN_POINT ('', (0.936413655905566, 0.487454706784532, -3.97));
#620 = CARTESIAN_POINT ('', (0.220366016536436, 0.314715287270209, 0.));
#630 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#590, #600), (#610, #620)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#640 = ADVANCED_FACE ('', (#580), #630, .T.);
#650 = CARTESIAN_POINT ('', (0.384196425394233, 0., 0.));
#660 = VERTEX_POINT ('', #650);
#670 = CARTESIAN_POINT ('', (0.220366016536435, 0.314715287270209, 0.));
#680 = CARTESIAN_POINT ('', (0.150755071385864, 0.215300554705986, 0.));
#690 = CARTESIAN_POINT ('', (0.206794258758589, 0.107650277352993, 0.));
#700 = CARTESIAN_POINT ('', (0.262833446131314, 2.13091270122805E-17, 0.));
#710 = CARTESIAN_POINT ('', (0.384196425394233, 0., 0.));
#720 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#670, #680, #690, #700, #710), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 0.5, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.854911870672947, 1., 0.854911870672947, 1.))
   REPRESENTATION_ITEM ('')
);
#730 = EDGE_CURVE ('', #390, #660, #720, .T.);
#740 = ORIENTED_EDGE ('', *, *, #730, .F.);
#750 = ORIENTED_EDGE ('', *, *, #430, .T.);
#760 = CARTESIAN_POINT ('', (0.384196425394233, 0., 0.));
#770 = CARTESIAN_POINT ('', (0.936413655905565, 0.487454706784531, -3.97));
#780 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#760, #770), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#790 = EDGE_CURVE ('', #660, #20, #780, .T.);
#800 = ORIENTED_EDGE ('', *, *, #790, .F.);
#810 = EDGE_LOOP ('', (#740, #750, #800));
#820 = FACE_OUTER_BOUND ('', #810, .T.);
#830 = CARTESIAN_POINT ('', (0.220366016536435, 0.314715287270209, 0.));
#840 = CARTESIAN_POINT ('', (0.150755071385864, 0.215300554705986, 0.));
#850 = CARTESIAN_POINT ('', (0.206794258758589, 0.107650277352993, 0.));
#860 = CARTESIAN_POINT ('', (0.262833446131314, 2.13091270122805E-17, 0.));
#870 = CARTESIAN_POINT ('', (0.384196425394233, 0., 0.));
#880 = CARTESIAN_POINT ('', (0.936413655905565, 0.487454706784531, -3.97));
#890 = CARTESIAN_POINT ('', (0.936413655905565, 0.487454706784531, -3.97));
#900 = CARTESIAN_POINT ('', (0.936413655905565, 0.487454706784531, -3.97));
#910 = CARTESIAN_POINT ('', (0.936413655905565, 0.487454706784531, -3.97));
#920 = CARTESIAN_POINT ('', (0.936413655905565, 0.487454706784531, -3.97));
#930 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#830, #840, #850, #860, #870), (#880, #890, #900, #910, #920)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 2, 3), (0., 1.), (0., 0.5, 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.854911870672947, 1., 0.854911870672947, 1.), (1., 0.854911870672947, 1., 0.854911870672947, 1.)))
   REPRESENTATION_ITEM ('')
);
#940 = ADVANCED_FACE ('', (#820), #930, .T.);
#950 = ORIENTED_EDGE ('', *, *, #80, .T.);
#960 = CARTESIAN_POINT ('', (11.5237645478425, 0., 0.));
#970 = VERTEX_POINT ('', #960);
#980 = CARTESIAN_POINT ('', (11.5237645478425, -2.77555756156289E-17, 0.));
#990 = CARTESIAN_POINT ('', (11.3741310268705, 0.487454706784531, -3.97));
#1000 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#980, #990), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#1010 = EDGE_CURVE ('', #970, #40, #1000, .T.);
#1020 = ORIENTED_EDGE ('', *, *, #1010, .F.);
#1030 = CARTESIAN_POINT ('', (0.384196425394233, 0., 0.));
#1040 = CARTESIAN_POINT ('', (11.5237645478425, 0., 0.));
#1050 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1030, #1040), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1060 = EDGE_CURVE ('', #660, #970, #1050, .T.);
#1070 = ORIENTED_EDGE ('', *, *, #1060, .F.);
#1080 = ORIENTED_EDGE ('', *, *, #790, .T.);
#1090 = EDGE_LOOP ('', (#950, #1020, #1070, #1080));
#1100 = FACE_OUTER_BOUND ('', #1090, .T.);
#1110 = CARTESIAN_POINT ('', (0.936413655905565, 0.487454706784531, -3.97));
#1120 = CARTESIAN_POINT ('', (0.384196425394233, 0., 0.));
#1130 = CARTESIAN_POINT ('', (11.3741310268705, 0.487454706784531, -3.97));
#1140 = CARTESIAN_POINT ('', (11.5237645478425, 0., 0.));
#1150 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1110, #1120), (#1130, #1140)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#1160 = ADVANCED_FACE ('', (#1100), #1150, .T.);
#1170 = CARTESIAN_POINT ('', (11.6875949567003, 0.0852847127297907, 0.));
#1180 = VERTEX_POINT ('', #1170);
#1190 = CARTESIAN_POINT ('', (11.5237645478425, -2.77555756156289E-17, 0.));
#1200 = CARTESIAN_POINT ('', (11.6278779579529, -2.02528955298122E-17, 0.));
#1210 = CARTESIAN_POINT ('', (11.6875949567003, 0.0852847127297907, 0.));
#1220 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1190, #1200, #1210), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.887010833178222, 1.))
   REPRESENTATION_ITEM ('')
);
#1230 = EDGE_CURVE ('', #970, #1180, #1220, .T.);
#1240 = ORIENTED_EDGE ('', *, *, #1230, .F.);
#1250 = ORIENTED_EDGE ('', *, *, #1010, .T.);
#1260 = CARTESIAN_POINT ('', (11.6875949567003, 0.0852847127297907, 0.));
#1270 = CARTESIAN_POINT ('', (11.3741310268705, 0.487454706784531, -3.97));
#1280 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#1260, #1270), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#1290 = EDGE_CURVE ('', #1180, #40, #1280, .T.);
#1300 = ORIENTED_EDGE ('', *, *, #1290, .F.);
#1310 = EDGE_LOOP ('', (#1240, #1250, #1300));
#1320 = FACE_OUTER_BOUND ('', #1310, .T.);
#1330 = CARTESIAN_POINT ('', (11.5237645478425, -2.77555756156289E-17, 0.));
#1340 = CARTESIAN_POINT ('', (11.6278779579529, -2.02528955298122E-17, 0.));
#1350 = CARTESIAN_POINT ('', (11.6875949567003, 0.0852847127297907, 0.));
#1360 = CARTESIAN_POINT ('', (11.3741310268705, 0.487454706784531, -3.97));
#1370 = CARTESIAN_POINT ('', (11.3741310268705, 0.487454706784531, -3.97));
#1380 = CARTESIAN_POINT ('', (11.3741310268705, 0.487454706784531, -3.97));
#1390 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#1330, #1340, #1350), (#1360, #1370, #1380)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 3), (0., 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.887010833178222, 1.), (1., 0.887010833178222, 1.)))
   REPRESENTATION_ITEM ('')
);
#1400 = ADVANCED_FACE ('', (#1320), #1390, .T.);
#1410 = ORIENTED_EDGE ('', *, *, #270, .T.);
#1420 = CARTESIAN_POINT ('', (18.077430055661, 9.21028471272979, 0.));
#1430 = VERTEX_POINT ('', #1420);
#1440 = CARTESIAN_POINT ('', (18.077430055661, 9.21028471272979, 0.));
#1450 = CARTESIAN_POINT ('', (17.3613824162919, 9.03754529321547, -3.97));
#1460 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#1440, #1450), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#1470 = EDGE_CURVE ('', #1430, #180, #1460, .T.);
#1480 = ORIENTED_EDGE ('', *, *, #1470, .F.);
#1490 = CARTESIAN_POINT ('', (11.6875949567003, 0.0852847127297908, 0.));
#1500 = CARTESIAN_POINT ('', (18.077430055661, 9.21028471272979, 0.));
#1510 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1490, #1500), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1520 = EDGE_CURVE ('', #1180, #1430, #1510, .T.);
#1530 = ORIENTED_EDGE ('', *, *, #1520, .F.);
#1540 = ORIENTED_EDGE ('', *, *, #1290, .T.);
#1550 = EDGE_LOOP ('', (#1410, #1480, #1530, #1540));
#1560 = FACE_OUTER_BOUND ('', #1550, .T.);
#1570 = CARTESIAN_POINT ('', (11.3741310268705, 0.487454706784531, -3.97));
#1580 = CARTESIAN_POINT ('', (11.6875949567003, 0.0852847127297908, 0.));
#1590 = CARTESIAN_POINT ('', (17.3613824162919, 9.03754529321547, -3.97));
#1600 = CARTESIAN_POINT ('', (18.077430055661, 9.21028471272979, 0.));
#1610 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1570, #1580), (#1590, #1600)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#1620 = ADVANCED_FACE ('', (#1560), #1610, .T.);
#1630 = CARTESIAN_POINT ('', (17.9135996468032, 9.525, 0.));
#1640 = VERTEX_POINT ('', #1630);
#1650 = CARTESIAN_POINT ('', (18.077430055661, 9.21028471272979, 0.));
#1660 = CARTESIAN_POINT ('', (18.1470410008116, 9.30969944529402, 0.));
#1670 = CARTESIAN_POINT ('', (18.0910018134388, 9.41734972264701, 0.));
#1680 = CARTESIAN_POINT ('', (18.0349626260661, 9.525, 0.));
#1690 = CARTESIAN_POINT ('', (17.9135996468032, 9.525, 0.));
#1700 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1650, #1660, #1670, #1680, #1690), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 0.5, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.854911870672947, 1., 0.854911870672947, 1.))
   REPRESENTATION_ITEM ('')
);
#1710 = EDGE_CURVE ('', #1430, #1640, #1700, .T.);
#1720 = ORIENTED_EDGE ('', *, *, #1710, .F.);
#1730 = ORIENTED_EDGE ('', *, *, #1470, .T.);
#1740 = CARTESIAN_POINT ('', (17.3613824162919, 9.03754529321547, -3.97));
#1750 = CARTESIAN_POINT ('', (17.9135996468032, 9.525, 0.));
#1760 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1740, #1750), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1770 = EDGE_CURVE ('', #180, #1640, #1760, .T.);
#1780 = ORIENTED_EDGE ('', *, *, #1770, .T.);
#1790 = EDGE_LOOP ('', (#1720, #1730, #1780));
#1800 = FACE_OUTER_BOUND ('', #1790, .T.);
#1810 = CARTESIAN_POINT ('', (18.077430055661, 9.21028471272979, 0.));
#1820 = CARTESIAN_POINT ('', (18.1470410008116, 9.30969944529402, 0.));
#1830 = CARTESIAN_POINT ('', (18.0910018134388, 9.41734972264701, 0.));
#1840 = CARTESIAN_POINT ('', (18.0349626260661, 9.525, 0.));
#1850 = CARTESIAN_POINT ('', (17.9135996468032, 9.525, 0.));
#1860 = CARTESIAN_POINT ('', (17.3613824162919, 9.03754529321547, -3.97));
#1870 = CARTESIAN_POINT ('', (17.3613824162919, 9.03754529321547, -3.97));
#1880 = CARTESIAN_POINT ('', (17.3613824162919, 9.03754529321547, -3.97));
#1890 = CARTESIAN_POINT ('', (17.3613824162919, 9.03754529321547, -3.97));
#1900 = CARTESIAN_POINT ('', (17.3613824162919, 9.03754529321547, -3.97));
#1910 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#1810, #1820, #1830, #1840, #1850), (#1860, #1870, #1880, #1890, #1900)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 2, 3), (0., 1.), (0., 0.5, 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.854911870672947, 1., 0.854911870672947, 1.), (1., 0.854911870672947, 1., 0.854911870672947, 1.)))
   REPRESENTATION_ITEM ('')
);
#1920 = ADVANCED_FACE ('', (#1800), #1910, .T.);
#1930 = ORIENTED_EDGE ('', *, *, #220, .T.);
#1940 = CARTESIAN_POINT ('', (6.7740315243549, 9.525, 0.));
#1950 = VERTEX_POINT ('', #1940);
#1960 = CARTESIAN_POINT ('', (6.7740315243549, 9.525, 0.));
#1970 = CARTESIAN_POINT ('', (6.92366504532689, 9.03754529321547, -3.97));
#1980 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#1960, #1970), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#1990 = EDGE_CURVE ('', #1950, #110, #1980, .T.);
#2000 = ORIENTED_EDGE ('', *, *, #1990, .F.);
#2010 = CARTESIAN_POINT ('', (17.9135996468032, 9.525, 0.));
#2020 = CARTESIAN_POINT ('', (6.7740315243549, 9.525, 0.));
#2030 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2010, #2020), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2040 = EDGE_CURVE ('', #1640, #1950, #2030, .T.);
#2050 = ORIENTED_EDGE ('', *, *, #2040, .F.);
#2060 = ORIENTED_EDGE ('', *, *, #1770, .F.);
#2070 = EDGE_LOOP ('', (#1930, #2000, #2050, #2060));
#2080 = FACE_OUTER_BOUND ('', #2070, .T.);
#2090 = CARTESIAN_POINT ('', (17.3613824162919, 9.03754529321547, -3.97));
#2100 = CARTESIAN_POINT ('', (17.9135996468032, 9.525, 0.));
#2110 = CARTESIAN_POINT ('', (6.92366504532689, 9.03754529321547, -3.97));
#2120 = CARTESIAN_POINT ('', (6.7740315243549, 9.525, 0.));
#2130 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2090, #2100), (#2110, #2120)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#2140 = ADVANCED_FACE ('', (#2080), #2130, .T.);
#2150 = CARTESIAN_POINT ('', (6.7740315243549, 9.525, 0.));
#2160 = CARTESIAN_POINT ('', (6.66991811424455, 9.525, 0.));
#2170 = CARTESIAN_POINT ('', (6.6102011154971, 9.43971528727021, 0.));
#2180 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2150, #2160, #2170), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.887010833178222, 1.))
   REPRESENTATION_ITEM ('')
);
#2190 = EDGE_CURVE ('', #1950, #460, #2180, .T.);
#2200 = ORIENTED_EDGE ('', *, *, #2190, .F.);
#2210 = ORIENTED_EDGE ('', *, *, #1990, .T.);
#2220 = ORIENTED_EDGE ('', *, *, #550, .F.);
#2230 = EDGE_LOOP ('', (#2200, #2210, #2220));
#2240 = FACE_OUTER_BOUND ('', #2230, .T.);
#2250 = CARTESIAN_POINT ('', (6.7740315243549, 9.525, 0.));
#2260 = CARTESIAN_POINT ('', (6.66991811424455, 9.525, 0.));
#2270 = CARTESIAN_POINT ('', (6.6102011154971, 9.43971528727021, 0.));
#2280 = CARTESIAN_POINT ('', (6.92366504532689, 9.03754529321547, -3.97));
#2290 = CARTESIAN_POINT ('', (6.92366504532689, 9.03754529321547, -3.97));
#2300 = CARTESIAN_POINT ('', (6.92366504532689, 9.03754529321547, -3.97));
#2310 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#2250, #2260, #2270), (#2280, #2290, #2300)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 3), (0., 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.887010833178222, 1.), (1., 0.887010833178222, 1.)))
   REPRESENTATION_ITEM ('')
);
#2320 = ADVANCED_FACE ('', (#2240), #2310, .T.);
#2330 = ORIENTED_EDGE ('', *, *, #1060, .T.);
#2340 = ORIENTED_EDGE ('', *, *, #1230, .T.);
#2350 = ORIENTED_EDGE ('', *, *, #1520, .T.);
#2360 = ORIENTED_EDGE ('', *, *, #1710, .T.);
#2370 = ORIENTED_EDGE ('', *, *, #2040, .T.);
#2380 = ORIENTED_EDGE ('', *, *, #2190, .T.);
#2390 = ORIENTED_EDGE ('', *, *, #500, .T.);
#2400 = ORIENTED_EDGE ('', *, *, #730, .T.);
#2410 = EDGE_LOOP ('', (#2330, #2340, #2350, #2360, #2370, #2380, #2390, #2400));
#2420 = FACE_OUTER_BOUND ('', #2410, .T.);
#2430 = CARTESIAN_POINT ('', (18.1470410008116, 8.88178419700125E-16, 0.));
#2440 = CARTESIAN_POINT ('', (0.150755071385863, 8.88178419700125E-16, 0.));
#2450 = CARTESIAN_POINT ('', (18.1470410008116, 9.525, 0.));
#2460 = CARTESIAN_POINT ('', (0.150755071385863, 9.525, 0.));
#2470 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2430, #2440), (#2450, #2460)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.287366405829437, 0.712633594170563), (0.098255647360113, 0.901744352639887), .UNSPECIFIED.);
#2480 = ADVANCED_FACE ('', (#2420), #2470, .T.);
#2490 = CLOSED_SHELL ('', (#360, #640, #940, #1160, #1400, #1620, #1920, #2140, #2320, #2480));
#2500 = MANIFOLD_SOLID_BREP ('', #2490);
#2510 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#2520 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#2530 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#2540 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #2510, 'DISTANCE_ACCURACY_VALUE', '');
#2550 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#2540))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#2510, #2520, #2530))
   REPRESENTATION_CONTEXT ('', '3D')
);
#2560 = COLOUR_RGB ('', 1., 0.75, 0.);
#2570 = FILL_AREA_STYLE_COLOUR ('', #2560);
#2580 = FILL_AREA_STYLE ('', (#2570));
#2590 = SURFACE_STYLE_FILL_AREA (#2580);
#2600 = SURFACE_SIDE_STYLE ('', (#2590));
#2610 = SURFACE_STYLE_USAGE (.POSITIVE., #2600);
#2620 = PRESENTATION_STYLE_ASSIGNMENT ((#2610));
#2630 = STYLED_ITEM ('', (#2620), #2500);
#2640 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#2500), #2550);
#2650 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#2660 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #2650);
#2670 = MECHANICAL_CONTEXT ('', #2650, 'mechanical');
#2680 = PRODUCT ('product-name', '', '', (#2670));
#2690 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#2700 = PERSON ('', '', $, $, $, $);
#2710 = ORGANIZATION ($, '', '');
#2720 = PERSON_AND_ORGANIZATION (#2700, #2710);
#2730 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#2720, #2690, (#2680));
#2740 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#2680));
#2750 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #2680, .NOT_KNOWN.);
#2760 = APPROVAL_STATUS ('approved');
#2770 = APPROVAL (#2760, '');
#2780 = CALENDAR_DATE (2011, 26, 4);
#2790 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#2800 = LOCAL_TIME (9, 35, 39., #2790);
#2810 = DATE_AND_TIME (#2780, #2800);
#2820 = APPROVAL_DATE_TIME (#2810, #2770);
#2830 = APPROVAL_ROLE ('');
#2840 = PERSON ('', '', $, $, $, $);
#2850 = ORGANIZATION ($, '', '');
#2860 = PERSON_AND_ORGANIZATION (#2840, #2850);
#2870 = APPROVAL_PERSON_ORGANIZATION (#2860, #2770, #2830);
#2880 = CC_DESIGN_APPROVAL (#2770, (#2750));
#2890 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#2900 = PERSON ('', '', $, $, $, $);
#2910 = ORGANIZATION ($, '', '');
#2920 = PERSON_AND_ORGANIZATION (#2900, #2910);
#2930 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#2920, #2890, (#2750));
#2940 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#2950 = PERSON ('', '', $, $, $, $);
#2960 = ORGANIZATION ($, '', '');
#2970 = PERSON_AND_ORGANIZATION (#2950, #2960);
#2980 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#2970, #2940, (#2750));
#2990 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#3000 = SECURITY_CLASSIFICATION ('', '', #2990);
#3010 = APPROVAL_STATUS ('approved');
#3020 = APPROVAL (#3010, '');
#3030 = CALENDAR_DATE (2011, 26, 4);
#3040 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#3050 = LOCAL_TIME (9, 35, 39., #3040);
#3060 = DATE_AND_TIME (#3030, #3050);
#3070 = APPROVAL_DATE_TIME (#3060, #3020);
#3080 = APPROVAL_ROLE ('');
#3090 = PERSON ('', '', $, $, $, $);
#3100 = ORGANIZATION ($, '', '');
#3110 = PERSON_AND_ORGANIZATION (#3090, #3100);
#3120 = APPROVAL_PERSON_ORGANIZATION (#3110, #3020, #3080);
#3130 = CC_DESIGN_APPROVAL (#3020, (#3000));
#3140 = DATE_TIME_ROLE ('classification_date');
#3150 = CALENDAR_DATE (2011, 26, 4);
#3160 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#3170 = LOCAL_TIME (9, 35, 39., #3160);
#3180 = DATE_AND_TIME (#3150, #3170);
#3190 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#3180, #3140, (#3000));
#3200 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#3210 = PERSON ('', '', $, $, $, $);
#3220 = ORGANIZATION ($, '', '');
#3230 = PERSON_AND_ORGANIZATION (#3210, #3220);
#3240 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#3230, #3200, (#3000));
#3250 = CC_DESIGN_SECURITY_CLASSIFICATION (#3000, (#2750));
#3260 = DESIGN_CONTEXT ('', #2650, 'design');
#3270 = PRODUCT_DEFINITION ('', '', #2750, #3260);
#3280 = APPROVAL_STATUS ('approved');
#3290 = APPROVAL (#3280, '');
#3300 = CALENDAR_DATE (2011, 26, 4);
#3310 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#3320 = LOCAL_TIME (9, 35, 39., #3310);
#3330 = DATE_AND_TIME (#3300, #3320);
#3340 = APPROVAL_DATE_TIME (#3330, #3290);
#3350 = APPROVAL_ROLE ('');
#3360 = PERSON ('', '', $, $, $, $);
#3370 = ORGANIZATION ($, '', '');
#3380 = PERSON_AND_ORGANIZATION (#3360, #3370);
#3390 = APPROVAL_PERSON_ORGANIZATION (#3380, #3290, #3350);
#3400 = CC_DESIGN_APPROVAL (#3290, (#3270));
#3410 = DATE_TIME_ROLE ('creation_date');
#3420 = CALENDAR_DATE (2011, 26, 4);
#3430 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#3440 = LOCAL_TIME (9, 35, 39., #3430);
#3450 = DATE_AND_TIME (#3420, #3440);
#3460 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#3450, #3410, (#3270));
#3470 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#3480 = PERSON ('', '', $, $, $, $);
#3490 = ORGANIZATION ($, '', '');
#3500 = PERSON_AND_ORGANIZATION (#3480, #3490);
#3510 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#3500, #3470, (#3270));
#3520 = PRODUCT_DEFINITION_SHAPE ('', '', #3270);
#3530 = SHAPE_DEFINITION_REPRESENTATION (#3520, #2640);
ENDSEC;
END-ISO-10303-21;