ISO-10303-21;
HEADER;
FILE_DESCRIPTION ((), '1');
FILE_NAME ('C:\\TDMTemp\\Tools\\SMLIB\\inserts\\D\\step\\DCGT 11T304FN-ALU AT10.stp', '2011-04-26T09:37:06', ('Unknown'), ('Unknown'), 'HarmonyWare STEP v1.4.6', 'HarmonyWare Translators', '');
FILE_SCHEMA (('CONFIG_CONTROL_DESIGN'));
ENDSEC;

DATA;
#10 = CARTESIAN_POINT ('', (0.768392850788466, 0., 0.));
#20 = VERTEX_POINT ('', #10);
#30 = CARTESIAN_POINT ('', (11.4196511377322, 0., 0.));
#40 = VERTEX_POINT ('', #30);
#50 = CARTESIAN_POINT ('', (0.768392850788466, 0., 0.));
#60 = CARTESIAN_POINT ('', (11.4196511377322, 0., 0.));
#70 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#50, #60), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#80 = EDGE_CURVE ('', #20, #40, #70, .T.);
#90 = ORIENTED_EDGE ('', *, *, #80, .T.);
#100 = CARTESIAN_POINT ('', (11.7473119554478, 0.170569425459581, 0.));
#110 = VERTEX_POINT ('', #100);
#120 = CARTESIAN_POINT ('', (11.4196511377322, -5.55111512312578E-17, 0.));
#130 = CARTESIAN_POINT ('', (11.6278779579529, -4.05057910596244E-17, 0.));
#140 = CARTESIAN_POINT ('', (11.7473119554478, 0.170569425459581, 0.));
#150 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#120, #130, #140), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.887010833178222, 1.))
   REPRESENTATION_ITEM ('')
);
#160 = EDGE_CURVE ('', #40, #110, #150, .T.);
#170 = ORIENTED_EDGE ('', *, *, #160, .T.);
#180 = CARTESIAN_POINT ('', (17.8570640391246, 8.89556942545958, 0.));
#190 = VERTEX_POINT ('', #180);
#200 = CARTESIAN_POINT ('', (11.7473119554478, 0.170569425459582, 0.));
#210 = CARTESIAN_POINT ('', (17.8570640391246, 8.89556942545958, 0.));
#220 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#200, #210), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#230 = EDGE_CURVE ('', #110, #190, #220, .T.);
#240 = ORIENTED_EDGE ('', *, *, #230, .T.);
#250 = CARTESIAN_POINT ('', (17.529403221409, 9.525, 0.));
#260 = VERTEX_POINT ('', #250);
#270 = CARTESIAN_POINT ('', (17.8570640391246, 8.89556942545958, 0.));
#280 = CARTESIAN_POINT ('', (17.9962859294257, 9.09439889058803, 0.));
#290 = CARTESIAN_POINT ('', (17.8842075546802, 9.30969944529401, 0.));
#300 = CARTESIAN_POINT ('', (17.7721291799348, 9.525, 0.));
#310 = CARTESIAN_POINT ('', (17.529403221409, 9.525, 0.));
#320 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#270, #280, #290, #300, #310), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 0.5, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.854911870672947, 1., 0.854911870672947, 1.))
   REPRESENTATION_ITEM ('')
);
#330 = EDGE_CURVE ('', #190, #260, #320, .T.);
#340 = ORIENTED_EDGE ('', *, *, #330, .T.);
#350 = CARTESIAN_POINT ('', (6.87814493446525, 9.525, 0.));
#360 = VERTEX_POINT ('', #350);
#370 = CARTESIAN_POINT ('', (17.529403221409, 9.525, 0.));
#380 = CARTESIAN_POINT ('', (6.87814493446525, 9.525, 0.));
#390 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#370, #380), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#400 = EDGE_CURVE ('', #260, #360, #390, .T.);
#410 = ORIENTED_EDGE ('', *, *, #400, .T.);
#420 = CARTESIAN_POINT ('', (6.55048411674965, 9.35443057454042, 0.));
#430 = VERTEX_POINT ('', #420);
#440 = CARTESIAN_POINT ('', (6.87814493446525, 9.525, 0.));
#450 = CARTESIAN_POINT ('', (6.66991811424455, 9.525, 0.));
#460 = CARTESIAN_POINT ('', (6.55048411674965, 9.35443057454042, 0.));
#470 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#440, #450, #460), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.887010833178221, 1.))
   REPRESENTATION_ITEM ('')
);
#480 = EDGE_CURVE ('', #360, #430, #470, .T.);
#490 = ORIENTED_EDGE ('', *, *, #480, .T.);
#500 = CARTESIAN_POINT ('', (0.440732033072868, 0.629430574540416, 0.));
#510 = VERTEX_POINT ('', #500);
#520 = CARTESIAN_POINT ('', (6.55048411674965, 9.35443057454042, 0.));
#530 = CARTESIAN_POINT ('', (0.440732033072868, 0.629430574540416, 0.));
#540 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#520, #530), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#550 = EDGE_CURVE ('', #430, #510, #540, .T.);
#560 = ORIENTED_EDGE ('', *, *, #550, .T.);
#570 = CARTESIAN_POINT ('', (0.44073203307287, 0.629430574540419, 0.));
#580 = CARTESIAN_POINT ('', (0.301510142771727, 0.430601109411973, 0.));
#590 = CARTESIAN_POINT ('', (0.413588517517178, 0.215300554705987, 0.));
#600 = CARTESIAN_POINT ('', (0.525666892262628, 4.2618254024561E-17, 0.));
#610 = CARTESIAN_POINT ('', (0.768392850788466, 0., 0.));
#620 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#570, #580, #590, #600, #610), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 0.5, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.854911870672947, 1., 0.854911870672947, 1.))
   REPRESENTATION_ITEM ('')
);
#630 = EDGE_CURVE ('', #510, #20, #620, .T.);
#640 = ORIENTED_EDGE ('', *, *, #630, .T.);
#650 = EDGE_LOOP ('', (#90, #170, #240, #340, #410, #490, #560, #640));
#660 = FACE_OUTER_BOUND ('', #650, .T.);
#670 = CARTESIAN_POINT ('', (17.9962859294257, 0., 0.));
#680 = CARTESIAN_POINT ('', (0.301510142771729, 0., 0.));
#690 = CARTESIAN_POINT ('', (17.9962859294257, 9.525, 0.));
#700 = CARTESIAN_POINT ('', (0.301510142771729, 9.525, 0.));
#710 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#670, #680), (#690, #700)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.284551919336238, 0.715448080663762), (0.0997579547495853, 0.900242045250415), .UNSPECIFIED.);
#720 = ADVANCED_FACE ('', (#660), #710, .T.);
#730 = ORIENTED_EDGE ('', *, *, #630, .F.);
#740 = CARTESIAN_POINT ('', (0.936398740470971, 0.48745470678453, -3.97));
#750 = VERTEX_POINT ('', #740);
#760 = CARTESIAN_POINT ('', (0.44073203307287, 0.629430574540419, 0.));
#770 = CARTESIAN_POINT ('', (0.936398740470971, 0.48745470678453, -3.97));
#780 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#760, #770), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#790 = EDGE_CURVE ('', #510, #750, #780, .T.);
#800 = ORIENTED_EDGE ('', *, *, #790, .T.);
#810 = CARTESIAN_POINT ('', (0.768392850788466, 0., 0.));
#820 = CARTESIAN_POINT ('', (0.936398740470971, 0.48745470678453, -3.97));
#830 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#810, #820), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#840 = EDGE_CURVE ('', #20, #750, #830, .T.);
#850 = ORIENTED_EDGE ('', *, *, #840, .F.);
#860 = EDGE_LOOP ('', (#730, #800, #850));
#870 = FACE_OUTER_BOUND ('', #860, .T.);
#880 = CARTESIAN_POINT ('', (0.44073203307287, 0.629430574540419, 0.));
#890 = CARTESIAN_POINT ('', (0.301510142771727, 0.430601109411973, 0.));
#900 = CARTESIAN_POINT ('', (0.413588517517178, 0.215300554705987, 0.));
#910 = CARTESIAN_POINT ('', (0.525666892262628, 4.2618254024561E-17, 0.));
#920 = CARTESIAN_POINT ('', (0.768392850788466, 0., 0.));
#930 = CARTESIAN_POINT ('', (0.936398740470971, 0.48745470678453, -3.97));
#940 = CARTESIAN_POINT ('', (0.936398740470971, 0.48745470678453, -3.97));
#950 = CARTESIAN_POINT ('', (0.936398740470971, 0.48745470678453, -3.97));
#960 = CARTESIAN_POINT ('', (0.936398740470971, 0.48745470678453, -3.97));
#970 = CARTESIAN_POINT ('', (0.936398740470971, 0.48745470678453, -3.97));
#980 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#880, #890, #900, #910, #920), (#930, #940, #950, #960, #970)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 2, 3), (0., 1.), (0., 0.5, 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.854911870672947, 1., 0.854911870672947, 1.), (1., 0.854911870672947, 1., 0.854911870672947, 1.)))
   REPRESENTATION_ITEM ('')
);
#990 = ADVANCED_FACE ('', (#870), #980, .T.);
#1000 = CARTESIAN_POINT ('', (6.92366908729867, 9.03754529321547, -3.97));
#1010 = VERTEX_POINT ('', #1000);
#1020 = CARTESIAN_POINT ('', (6.92366908729867, 9.03754529321547, -3.97));
#1030 = CARTESIAN_POINT ('', (0.936398740470971, 0.48745470678453, -3.97));
#1040 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1020, #1030), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1050 = EDGE_CURVE ('', #1010, #750, #1040, .T.);
#1060 = ORIENTED_EDGE ('', *, *, #1050, .T.);
#1070 = ORIENTED_EDGE ('', *, *, #790, .F.);
#1080 = ORIENTED_EDGE ('', *, *, #550, .F.);
#1090 = CARTESIAN_POINT ('', (6.55048411674965, 9.35443057454042, 0.));
#1100 = CARTESIAN_POINT ('', (6.92366908729867, 9.03754529321547, -3.97));
#1110 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#1090, #1100), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#1120 = EDGE_CURVE ('', #430, #1010, #1110, .T.);
#1130 = ORIENTED_EDGE ('', *, *, #1120, .T.);
#1140 = EDGE_LOOP ('', (#1060, #1070, #1080, #1130));
#1150 = FACE_OUTER_BOUND ('', #1140, .T.);
#1160 = CARTESIAN_POINT ('', (6.92366908729867, 9.03754529321547, -3.97));
#1170 = CARTESIAN_POINT ('', (6.55048411674965, 9.35443057454042, 0.));
#1180 = CARTESIAN_POINT ('', (0.936398740470971, 0.48745470678453, -3.97));
#1190 = CARTESIAN_POINT ('', (0.440732033072868, 0.629430574540416, 0.));
#1200 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1160, #1170), (#1180, #1190)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#1210 = ADVANCED_FACE ('', (#1150), #1200, .T.);
#1220 = CARTESIAN_POINT ('', (11.3741269848987, 0.487454706784531, -3.97));
#1230 = VERTEX_POINT ('', #1220);
#1240 = CARTESIAN_POINT ('', (0.936398740470972, 0.487454706784531, -3.97));
#1250 = CARTESIAN_POINT ('', (11.3741269848987, 0.487454706784531, -3.97));
#1260 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1240, #1250), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1270 = EDGE_CURVE ('', #750, #1230, #1260, .T.);
#1280 = ORIENTED_EDGE ('', *, *, #1270, .F.);
#1290 = ORIENTED_EDGE ('', *, *, #1050, .F.);
#1300 = CARTESIAN_POINT ('', (17.3613973317264, 9.03754529321547, -3.97));
#1310 = VERTEX_POINT ('', #1300);
#1320 = CARTESIAN_POINT ('', (17.3613973317264, 9.03754529321547, -3.97));
#1330 = CARTESIAN_POINT ('', (6.92366908729867, 9.03754529321547, -3.97));
#1340 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1320, #1330), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1350 = EDGE_CURVE ('', #1310, #1010, #1340, .T.);
#1360 = ORIENTED_EDGE ('', *, *, #1350, .F.);
#1370 = CARTESIAN_POINT ('', (11.3741269848988, 0.487454706784531, -3.97));
#1380 = CARTESIAN_POINT ('', (17.3613973317264, 9.03754529321547, -3.97));
#1390 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1370, #1380), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1400 = EDGE_CURVE ('', #1230, #1310, #1390, .T.);
#1410 = ORIENTED_EDGE ('', *, *, #1400, .F.);
#1420 = EDGE_LOOP ('', (#1280, #1290, #1360, #1410));
#1430 = FACE_OUTER_BOUND ('', #1420, .T.);
#1440 = CARTESIAN_POINT ('', (17.3613973317264, 0.48745470678453, -3.97));
#1450 = CARTESIAN_POINT ('', (17.3613973317264, 9.03754529321547, -3.97));
#1460 = CARTESIAN_POINT ('', (0.93639874047097, 0.48745470678453, -3.97));
#1470 = CARTESIAN_POINT ('', (0.93639874047097, 9.03754529321547, -3.97));
#1480 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1440, #1450), (#1460, #1470)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.0968110208049716, 0.903188979195028), (0.290118563699395, 0.709881436300605), .UNSPECIFIED.);
#1490 = ADVANCED_FACE ('', (#1430), #1480, .T.);
#1500 = ORIENTED_EDGE ('', *, *, #1270, .T.);
#1510 = CARTESIAN_POINT ('', (11.4196511377322, -5.55111512312578E-17, 0.));
#1520 = CARTESIAN_POINT ('', (11.3741269848987, 0.487454706784531, -3.97));
#1530 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#1510, #1520), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#1540 = EDGE_CURVE ('', #40, #1230, #1530, .T.);
#1550 = ORIENTED_EDGE ('', *, *, #1540, .F.);
#1560 = ORIENTED_EDGE ('', *, *, #80, .F.);
#1570 = ORIENTED_EDGE ('', *, *, #840, .T.);
#1580 = EDGE_LOOP ('', (#1500, #1550, #1560, #1570));
#1590 = FACE_OUTER_BOUND ('', #1580, .T.);
#1600 = CARTESIAN_POINT ('', (0.936398740470972, 0.487454706784531, -3.97));
#1610 = CARTESIAN_POINT ('', (0.768392850788466, 0., 0.));
#1620 = CARTESIAN_POINT ('', (11.3741269848987, 0.487454706784531, -3.97));
#1630 = CARTESIAN_POINT ('', (11.4196511377322, 0., 0.));
#1640 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1600, #1610), (#1620, #1630)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#1650 = ADVANCED_FACE ('', (#1590), #1640, .T.);
#1660 = ORIENTED_EDGE ('', *, *, #160, .F.);
#1670 = ORIENTED_EDGE ('', *, *, #1540, .T.);
#1680 = CARTESIAN_POINT ('', (11.7473119554478, 0.170569425459581, 0.));
#1690 = CARTESIAN_POINT ('', (11.3741269848987, 0.487454706784531, -3.97));
#1700 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#1680, #1690), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#1710 = EDGE_CURVE ('', #110, #1230, #1700, .T.);
#1720 = ORIENTED_EDGE ('', *, *, #1710, .F.);
#1730 = EDGE_LOOP ('', (#1660, #1670, #1720));
#1740 = FACE_OUTER_BOUND ('', #1730, .T.);
#1750 = CARTESIAN_POINT ('', (11.4196511377322, -5.55111512312578E-17, 0.));
#1760 = CARTESIAN_POINT ('', (11.6278779579529, -4.05057910596244E-17, 0.));
#1770 = CARTESIAN_POINT ('', (11.7473119554478, 0.170569425459581, 0.));
#1780 = CARTESIAN_POINT ('', (11.3741269848987, 0.487454706784531, -3.97));
#1790 = CARTESIAN_POINT ('', (11.3741269848987, 0.487454706784531, -3.97));
#1800 = CARTESIAN_POINT ('', (11.3741269848987, 0.487454706784531, -3.97));
#1810 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#1750, #1760, #1770), (#1780, #1790, #1800)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 3), (0., 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.887010833178222, 1.), (1., 0.887010833178222, 1.)))
   REPRESENTATION_ITEM ('')
);
#1820 = ADVANCED_FACE ('', (#1740), #1810, .T.);
#1830 = ORIENTED_EDGE ('', *, *, #1400, .T.);
#1840 = CARTESIAN_POINT ('', (17.8570640391246, 8.89556942545958, 0.));
#1850 = CARTESIAN_POINT ('', (17.3613973317264, 9.03754529321547, -3.97));
#1860 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#1840, #1850), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#1870 = EDGE_CURVE ('', #190, #1310, #1860, .T.);
#1880 = ORIENTED_EDGE ('', *, *, #1870, .F.);
#1890 = ORIENTED_EDGE ('', *, *, #230, .F.);
#1900 = ORIENTED_EDGE ('', *, *, #1710, .T.);
#1910 = EDGE_LOOP ('', (#1830, #1880, #1890, #1900));
#1920 = FACE_OUTER_BOUND ('', #1910, .T.);
#1930 = CARTESIAN_POINT ('', (11.3741269848988, 0.487454706784531, -3.97));
#1940 = CARTESIAN_POINT ('', (11.7473119554478, 0.170569425459582, 0.));
#1950 = CARTESIAN_POINT ('', (17.3613973317264, 9.03754529321547, -3.97));
#1960 = CARTESIAN_POINT ('', (17.8570640391246, 8.89556942545958, 0.));
#1970 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1930, #1940), (#1950, #1960)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#1980 = ADVANCED_FACE ('', (#1920), #1970, .T.);
#1990 = ORIENTED_EDGE ('', *, *, #480, .F.);
#2000 = CARTESIAN_POINT ('', (6.87814493446525, 9.525, 0.));
#2010 = CARTESIAN_POINT ('', (6.92366908729867, 9.03754529321547, -3.97));
#2020 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#2000, #2010), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#2030 = EDGE_CURVE ('', #360, #1010, #2020, .T.);
#2040 = ORIENTED_EDGE ('', *, *, #2030, .T.);
#2050 = ORIENTED_EDGE ('', *, *, #1120, .F.);
#2060 = EDGE_LOOP ('', (#1990, #2040, #2050));
#2070 = FACE_OUTER_BOUND ('', #2060, .T.);
#2080 = CARTESIAN_POINT ('', (6.87814493446525, 9.525, 0.));
#2090 = CARTESIAN_POINT ('', (6.66991811424455, 9.525, 0.));
#2100 = CARTESIAN_POINT ('', (6.55048411674965, 9.35443057454042, 0.));
#2110 = CARTESIAN_POINT ('', (6.92366908729867, 9.03754529321547, -3.97));
#2120 = CARTESIAN_POINT ('', (6.92366908729867, 9.03754529321547, -3.97));
#2130 = CARTESIAN_POINT ('', (6.92366908729867, 9.03754529321547, -3.97));
#2140 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#2080, #2090, #2100), (#2110, #2120, #2130)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 3), (0., 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.887010833178221, 1.), (1., 0.887010833178221, 1.)))
   REPRESENTATION_ITEM ('')
);
#2150 = ADVANCED_FACE ('', (#2070), #2140, .T.);
#2160 = ORIENTED_EDGE ('', *, *, #1350, .T.);
#2170 = ORIENTED_EDGE ('', *, *, #2030, .F.);
#2180 = ORIENTED_EDGE ('', *, *, #400, .F.);
#2190 = CARTESIAN_POINT ('', (17.3613973317264, 9.03754529321547, -3.97));
#2200 = CARTESIAN_POINT ('', (17.529403221409, 9.525, 0.));
#2210 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2190, #2200), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2220 = EDGE_CURVE ('', #1310, #260, #2210, .T.);
#2230 = ORIENTED_EDGE ('', *, *, #2220, .F.);
#2240 = EDGE_LOOP ('', (#2160, #2170, #2180, #2230));
#2250 = FACE_OUTER_BOUND ('', #2240, .T.);
#2260 = CARTESIAN_POINT ('', (17.3613973317264, 9.03754529321547, -3.97));
#2270 = CARTESIAN_POINT ('', (17.529403221409, 9.525, 0.));
#2280 = CARTESIAN_POINT ('', (6.92366908729867, 9.03754529321547, -3.97));
#2290 = CARTESIAN_POINT ('', (6.87814493446525, 9.525, 0.));
#2300 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2260, #2270), (#2280, #2290)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#2310 = ADVANCED_FACE ('', (#2250), #2300, .T.);
#2320 = ORIENTED_EDGE ('', *, *, #330, .F.);
#2330 = ORIENTED_EDGE ('', *, *, #1870, .T.);
#2340 = ORIENTED_EDGE ('', *, *, #2220, .T.);
#2350 = EDGE_LOOP ('', (#2320, #2330, #2340));
#2360 = FACE_OUTER_BOUND ('', #2350, .T.);
#2370 = CARTESIAN_POINT ('', (17.8570640391246, 8.89556942545958, 0.));
#2380 = CARTESIAN_POINT ('', (17.9962859294257, 9.09439889058803, 0.));
#2390 = CARTESIAN_POINT ('', (17.8842075546802, 9.30969944529401, 0.));
#2400 = CARTESIAN_POINT ('', (17.7721291799348, 9.525, 0.));
#2410 = CARTESIAN_POINT ('', (17.529403221409, 9.525, 0.));
#2420 = CARTESIAN_POINT ('', (17.3613973317264, 9.03754529321547, -3.97));
#2430 = CARTESIAN_POINT ('', (17.3613973317264, 9.03754529321547, -3.97));
#2440 = CARTESIAN_POINT ('', (17.3613973317264, 9.03754529321547, -3.97));
#2450 = CARTESIAN_POINT ('', (17.3613973317264, 9.03754529321547, -3.97));
#2460 = CARTESIAN_POINT ('', (17.3613973317264, 9.03754529321547, -3.97));
#2470 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#2370, #2380, #2390, #2400, #2410), (#2420, #2430, #2440, #2450, #2460)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 2, 3), (0., 1.), (0., 0.5, 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.854911870672947, 1., 0.854911870672947, 1.), (1., 0.854911870672947, 1., 0.854911870672947, 1.)))
   REPRESENTATION_ITEM ('')
);
#2480 = ADVANCED_FACE ('', (#2360), #2470, .T.);
#2490 = CLOSED_SHELL ('', (#720, #990, #1210, #1490, #1650, #1820, #1980, #2150, #2310, #2480));
#2500 = MANIFOLD_SOLID_BREP ('', #2490);
#2510 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#2520 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#2530 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#2540 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #2510, 'DISTANCE_ACCURACY_VALUE', '');
#2550 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#2540))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#2510, #2520, #2530))
   REPRESENTATION_CONTEXT ('', '3D')
);
#2560 = COLOUR_RGB ('', 1., 0.75, 0.);
#2570 = FILL_AREA_STYLE_COLOUR ('', #2560);
#2580 = FILL_AREA_STYLE ('', (#2570));
#2590 = SURFACE_STYLE_FILL_AREA (#2580);
#2600 = SURFACE_SIDE_STYLE ('', (#2590));
#2610 = SURFACE_STYLE_USAGE (.POSITIVE., #2600);
#2620 = PRESENTATION_STYLE_ASSIGNMENT ((#2610));
#2630 = STYLED_ITEM ('', (#2620), #2500);
#2640 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#2500), #2550);
#2650 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#2660 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #2650);
#2670 = MECHANICAL_CONTEXT ('', #2650, 'mechanical');
#2680 = PRODUCT ('product-name', '', '', (#2670));
#2690 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#2700 = PERSON ('', '', $, $, $, $);
#2710 = ORGANIZATION ($, '', '');
#2720 = PERSON_AND_ORGANIZATION (#2700, #2710);
#2730 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#2720, #2690, (#2680));
#2740 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#2680));
#2750 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #2680, .NOT_KNOWN.);
#2760 = APPROVAL_STATUS ('approved');
#2770 = APPROVAL (#2760, '');
#2780 = CALENDAR_DATE (2011, 26, 4);
#2790 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#2800 = LOCAL_TIME (9, 37, 6., #2790);
#2810 = DATE_AND_TIME (#2780, #2800);
#2820 = APPROVAL_DATE_TIME (#2810, #2770);
#2830 = APPROVAL_ROLE ('');
#2840 = PERSON ('', '', $, $, $, $);
#2850 = ORGANIZATION ($, '', '');
#2860 = PERSON_AND_ORGANIZATION (#2840, #2850);
#2870 = APPROVAL_PERSON_ORGANIZATION (#2860, #2770, #2830);
#2880 = CC_DESIGN_APPROVAL (#2770, (#2750));
#2890 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#2900 = PERSON ('', '', $, $, $, $);
#2910 = ORGANIZATION ($, '', '');
#2920 = PERSON_AND_ORGANIZATION (#2900, #2910);
#2930 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#2920, #2890, (#2750));
#2940 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#2950 = PERSON ('', '', $, $, $, $);
#2960 = ORGANIZATION ($, '', '');
#2970 = PERSON_AND_ORGANIZATION (#2950, #2960);
#2980 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#2970, #2940, (#2750));
#2990 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#3000 = SECURITY_CLASSIFICATION ('', '', #2990);
#3010 = APPROVAL_STATUS ('approved');
#3020 = APPROVAL (#3010, '');
#3030 = CALENDAR_DATE (2011, 26, 4);
#3040 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#3050 = LOCAL_TIME (9, 37, 6., #3040);
#3060 = DATE_AND_TIME (#3030, #3050);
#3070 = APPROVAL_DATE_TIME (#3060, #3020);
#3080 = APPROVAL_ROLE ('');
#3090 = PERSON ('', '', $, $, $, $);
#3100 = ORGANIZATION ($, '', '');
#3110 = PERSON_AND_ORGANIZATION (#3090, #3100);
#3120 = APPROVAL_PERSON_ORGANIZATION (#3110, #3020, #3080);
#3130 = CC_DESIGN_APPROVAL (#3020, (#3000));
#3140 = DATE_TIME_ROLE ('classification_date');
#3150 = CALENDAR_DATE (2011, 26, 4);
#3160 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#3170 = LOCAL_TIME (9, 37, 6., #3160);
#3180 = DATE_AND_TIME (#3150, #3170);
#3190 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#3180, #3140, (#3000));
#3200 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#3210 = PERSON ('', '', $, $, $, $);
#3220 = ORGANIZATION ($, '', '');
#3230 = PERSON_AND_ORGANIZATION (#3210, #3220);
#3240 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#3230, #3200, (#3000));
#3250 = CC_DESIGN_SECURITY_CLASSIFICATION (#3000, (#2750));
#3260 = DESIGN_CONTEXT ('', #2650, 'design');
#3270 = PRODUCT_DEFINITION ('', '', #2750, #3260);
#3280 = APPROVAL_STATUS ('approved');
#3290 = APPROVAL (#3280, '');
#3300 = CALENDAR_DATE (2011, 26, 4);
#3310 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#3320 = LOCAL_TIME (9, 37, 6., #3310);
#3330 = DATE_AND_TIME (#3300, #3320);
#3340 = APPROVAL_DATE_TIME (#3330, #3290);
#3350 = APPROVAL_ROLE ('');
#3360 = PERSON ('', '', $, $, $, $);
#3370 = ORGANIZATION ($, '', '');
#3380 = PERSON_AND_ORGANIZATION (#3360, #3370);
#3390 = APPROVAL_PERSON_ORGANIZATION (#3380, #3290, #3350);
#3400 = CC_DESIGN_APPROVAL (#3290, (#3270));
#3410 = DATE_TIME_ROLE ('creation_date');
#3420 = CALENDAR_DATE (2011, 26, 4);
#3430 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#3440 = LOCAL_TIME (9, 37, 6., #3430);
#3450 = DATE_AND_TIME (#3420, #3440);
#3460 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#3450, #3410, (#3270));
#3470 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#3480 = PERSON ('', '', $, $, $, $);
#3490 = ORGANIZATION ($, '', '');
#3500 = PERSON_AND_ORGANIZATION (#3480, #3490);
#3510 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#3500, #3470, (#3270));
#3520 = PRODUCT_DEFINITION_SHAPE ('', '', #3270);
#3530 = SHAPE_DEFINITION_REPRESENTATION (#3520, #2640);
ENDSEC;
END-ISO-10303-21;