ISO-10303-21;
HEADER;
FILE_DESCRIPTION ((), '1');
FILE_NAME ('C:\\TDMTemp\\Tools\\SMLIB\\grooving\\test\\step\\KA5R.stp', '2010-04-07T06:20:08', ('Unknown'), ('Unknown'), 'HarmonyWare STEP v1.4.3', 'HarmonyWare Translators', '');
FILE_SCHEMA (('CONFIG_CONTROL_DESIGN'));
ENDSEC;

DATA;
#10 = CARTESIAN_POINT ('', (-6., -11., -5.7));
#20 = VERTEX_POINT ('', #10);
#30 = CARTESIAN_POINT ('', (-5.5, -11., -5.7));
#40 = VERTEX_POINT ('', #30);
#50 = CARTESIAN_POINT ('', (-6., -11., -5.7));
#60 = CARTESIAN_POINT ('', (-5.5, -11., -5.7));
#70 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#50, #60), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.0416666666666672), .UNSPECIFIED.);
#80 = EDGE_CURVE ('', #20, #40, #70, .T.);
#90 = ORIENTED_EDGE ('', *, *, #80, .F.);
#100 = CARTESIAN_POINT ('', (-6., -11., 0.));
#110 = VERTEX_POINT ('', #100);
#120 = CARTESIAN_POINT ('', (-6., -11., 0.));
#130 = CARTESIAN_POINT ('', (-6., -11., -5.7));
#140 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#120, #130), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.7125), .UNSPECIFIED.);
#150 = EDGE_CURVE ('', #110, #20, #140, .T.);
#160 = ORIENTED_EDGE ('', *, *, #150, .F.);
#170 = CARTESIAN_POINT ('', (6., -11., 0.));
#180 = VERTEX_POINT ('', #170);
#190 = CARTESIAN_POINT ('', (-6., -11., 0.));
#200 = CARTESIAN_POINT ('', (6., -11., 0.));
#210 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#190, #200), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.545454545454545), .UNSPECIFIED.);
#220 = EDGE_CURVE ('', #110, #180, #210, .T.);
#230 = ORIENTED_EDGE ('', *, *, #220, .T.);
#240 = CARTESIAN_POINT ('', (6., -11., -5.7));
#250 = VERTEX_POINT ('', #240);
#260 = CARTESIAN_POINT ('', (6., -11., -5.7));
#270 = CARTESIAN_POINT ('', (6., -11., 0.));
#280 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#260, #270), .UNSPECIFIED., .F., .U., (2, 2), (0.2875, 1.), .UNSPECIFIED.);
#290 = EDGE_CURVE ('', #250, #180, #280, .T.);
#300 = ORIENTED_EDGE ('', *, *, #290, .F.);
#310 = CARTESIAN_POINT ('', (-2.5, -11., -5.7));
#320 = VERTEX_POINT ('', #310);
#330 = CARTESIAN_POINT ('', (-2.5, -11., -5.7));
#340 = CARTESIAN_POINT ('', (6., -11., -5.7));
#350 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#330, #340), .UNSPECIFIED., .F., .U., (2, 2), (0.291666666666667, 1.), .UNSPECIFIED.);
#360 = EDGE_CURVE ('', #320, #250, #350, .T.);
#370 = ORIENTED_EDGE ('', *, *, #360, .F.);
#380 = CARTESIAN_POINT ('', (-5.5, -11., -5.7));
#390 = CARTESIAN_POINT ('', (-2.5, -11., -5.7));
#400 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#380, #390), .UNSPECIFIED., .F., .U., (2, 2), (0.0416666666666672, 0.291666666666667), .UNSPECIFIED.);
#410 = EDGE_CURVE ('', #40, #320, #400, .T.);
#420 = ORIENTED_EDGE ('', *, *, #410, .F.);
#430 = EDGE_LOOP ('', (#90, #160, #230, #300, #370, #420));
#440 = FACE_OUTER_BOUND ('', #430, .F.);
#450 = CARTESIAN_POINT ('', (-6., -11., 0.));
#460 = CARTESIAN_POINT ('', (-6., -11., -5.7));
#470 = CARTESIAN_POINT ('', (6., -11., 0.));
#480 = CARTESIAN_POINT ('', (6., -11., -5.7));
#490 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#450, #460), (#470, #480)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 0.545454545454545), (0., 0.7125), .UNSPECIFIED.);
#500 = ADVANCED_FACE ('', (#440), #490, .F.);
#510 = CARTESIAN_POINT ('', (6.12959334402281, 9.67535044952597, 0.));
#520 = VERTEX_POINT ('', #510);
#530 = CARTESIAN_POINT ('', (6.12959334402281, 12.7, 0.));
#540 = VERTEX_POINT ('', #530);
#550 = CARTESIAN_POINT ('', (6.12959334402281, 9.67535044952597, 0.));
#560 = CARTESIAN_POINT ('', (6.12959334402281, 12.7, 0.));
#570 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#550, #560), .UNSPECIFIED., .F., .U., (2, 2), (0.312579647619539, 1.), .UNSPECIFIED.);
#580 = EDGE_CURVE ('', #520, #540, #570, .T.);
#590 = ORIENTED_EDGE ('', *, *, #580, .F.);
#600 = CARTESIAN_POINT ('', (6., 9.67535044952597, 0.));
#610 = VERTEX_POINT ('', #600);
#620 = CARTESIAN_POINT ('', (6.12959334402281, 9.67535044952597, 0.));
#630 = CARTESIAN_POINT ('', (6., 9.67535044952597, 0.));
#640 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#620, #630), .UNSPECIFIED., .F., .U., (2, 2), (0.987040665597719, 1.), .UNSPECIFIED.);
#650 = EDGE_CURVE ('', #520, #610, #640, .T.);
#660 = ORIENTED_EDGE ('', *, *, #650, .T.);
#670 = CARTESIAN_POINT ('', (6., -11., 0.));
#680 = CARTESIAN_POINT ('', (6., 9.67535044952597, 0.));
#690 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#670, #680), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#700 = EDGE_CURVE ('', #180, #610, #690, .T.);
#710 = ORIENTED_EDGE ('', *, *, #700, .F.);
#720 = ORIENTED_EDGE ('', *, *, #220, .F.);
#730 = CARTESIAN_POINT ('', (-6., 12.7, 0.));
#740 = VERTEX_POINT ('', #730);
#750 = CARTESIAN_POINT ('', (-6., -11., 0.));
#760 = CARTESIAN_POINT ('', (-6., 12.7, 0.));
#770 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#750, #760), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#780 = EDGE_CURVE ('', #110, #740, #770, .T.);
#790 = ORIENTED_EDGE ('', *, *, #780, .T.);
#800 = CARTESIAN_POINT ('', (-6., 12.7, 0.));
#810 = CARTESIAN_POINT ('', (6.12959334402281, 12.7, 0.));
#820 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#800, #810), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.551345152001037), .UNSPECIFIED.);
#830 = EDGE_CURVE ('', #740, #540, #820, .T.);
#840 = ORIENTED_EDGE ('', *, *, #830, .T.);
#850 = EDGE_LOOP ('', (#590, #660, #710, #720, #790, #840));
#860 = FACE_OUTER_BOUND ('', #850, .F.);
#870 = CARTESIAN_POINT ('', (1.23259516440783E-32, -2.75, 0.));
#880 = VERTEX_POINT ('', #870);
#890 = CARTESIAN_POINT ('', (1.23259516440783E-32, -2.75, 0.));
#900 = CARTESIAN_POINT ('', (-2.75, -2.75, 0.));
#910 = CARTESIAN_POINT ('', (-2.75, -5.84722569117195E-16, 0.));
#920 = CARTESIAN_POINT ('', (-2.75, 2.75, 0.));
#930 = CARTESIAN_POINT ('', (-4.47800172228038E-16, 2.75, 0.));
#940 = CARTESIAN_POINT ('', (2.75, 2.75, 0.));
#950 = CARTESIAN_POINT ('', (2.75, 1.99855472876365E-16, 0.));
#960 = CARTESIAN_POINT ('', (2.75, -2.75, 0.));
#970 = CARTESIAN_POINT ('', (1.23259516440783E-32, -2.75, 0.));
#980 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#890, #900, #910, #920, #930, #940, #950, #960, #970), .UNSPECIFIED., .T., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 2, 3), (0., 0.25, 0.5, 0.75, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#990 = EDGE_CURVE ('', #880, #880, #980, .T.);
#1000 = ORIENTED_EDGE ('', *, *, #990, .F.);
#1010 = EDGE_LOOP ('', (#1000));
#1020 = FACE_BOUND ('', #1010, .F.);
#1030 = CARTESIAN_POINT ('', (6.12959334402281, 12.7, 0.));
#1040 = CARTESIAN_POINT ('', (-6., 12.7, 0.));
#1050 = CARTESIAN_POINT ('', (6.12959334402281, -11., 0.));
#1060 = CARTESIAN_POINT ('', (-6., -11., 0.));
#1070 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1030, #1040), (#1050, #1060)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.1668619895339, 0.833138010466099), (0.468243841412362, 0.809242035031822), .UNSPECIFIED.);
#1080 = ADVANCED_FACE ('', (#860, #1020), #1070, .F.);
#1090 = CARTESIAN_POINT ('', (16., 8.38463695074006, -7.32));
#1100 = VERTEX_POINT ('', #1090);
#1110 = CARTESIAN_POINT ('', (6.12959334402281, 9.67535044952597, 0.));
#1120 = CARTESIAN_POINT ('', (10.1368152854225, 8.80935484212894, -4.91130514409978));
#1130 = CARTESIAN_POINT ('', (16., 8.38463695074006, -7.32));
#1140 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1110, #1120, #1130), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.969328153402271, 1.))
   REPRESENTATION_ITEM ('')
);
#1150 = EDGE_CURVE ('', #520, #1100, #1140, .T.);
#1160 = ORIENTED_EDGE ('', *, *, #1150, .F.);
#1170 = ORIENTED_EDGE ('', *, *, #580, .T.);
#1180 = CARTESIAN_POINT ('', (16., 12.7, -7.32));
#1190 = VERTEX_POINT ('', #1180);
#1200 = CARTESIAN_POINT ('', (6.12959334402281, 12.7, 2.66453525910038E-15));
#1210 = CARTESIAN_POINT ('', (10.1368152854225, 12.7, -4.91130514409977));
#1220 = CARTESIAN_POINT ('', (16., 12.7, -7.32));
#1230 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1200, #1210, #1220), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.969328153402271, 1.))
   REPRESENTATION_ITEM ('')
);
#1240 = EDGE_CURVE ('', #540, #1190, #1230, .T.);
#1250 = ORIENTED_EDGE ('', *, *, #1240, .T.);
#1260 = CARTESIAN_POINT ('', (16., 8.38463695074006, -7.32));
#1270 = CARTESIAN_POINT ('', (16., 12.7, -7.32));
#1280 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1260, #1270), .UNSPECIFIED., .F., .U., (2, 2), (0.019235670622741, 1.), .UNSPECIFIED.);
#1290 = EDGE_CURVE ('', #1100, #1190, #1280, .T.);
#1300 = ORIENTED_EDGE ('', *, *, #1290, .F.);
#1310 = EDGE_LOOP ('', (#1160, #1170, #1250, #1300));
#1320 = FACE_OUTER_BOUND ('', #1310, .F.);
#1330 = CARTESIAN_POINT ('', (6.12959334402281, 12.7, 3.89359069116221E-15));
#1340 = CARTESIAN_POINT ('', (6.12959334402281, 8.38463695074006, 3.89359069116221E-15));
#1350 = CARTESIAN_POINT ('', (10.1368152854225, 12.7, -4.91130514409977));
#1360 = CARTESIAN_POINT ('', (10.1368152854225, 8.38463695074006, -4.91130514409977));
#1370 = CARTESIAN_POINT ('', (16., 12.7, -7.32));
#1380 = CARTESIAN_POINT ('', (16., 8.38463695074006, -7.32));
#1390 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#1330, #1340), (#1350, #1360), (#1370, #1380)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 3), (2, 2), (0.334807660052209, 1.), (0., 0.980764329377259), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((0.969479994980877, 0.969479994980877), (0.954421584896888, 0.954421584896888), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#1400 = ADVANCED_FACE ('', (#1320), #1390, .F.);
#1410 = CARTESIAN_POINT ('', (6., 8.3, -7.45079230508252));
#1420 = VERTEX_POINT ('', #1410);
#1430 = CARTESIAN_POINT ('', (6., 8.36157473848496, -7.45079230508252));
#1440 = VERTEX_POINT ('', #1430);
#1450 = CARTESIAN_POINT ('', (6., 8.3, -7.45079230508252));
#1460 = CARTESIAN_POINT ('', (6., 8.36157473848496, -7.45079230508252));
#1470 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1450, #1460), .UNSPECIFIED., .F., .U., (2, 2), (0.933478735807474, 0.936456907260252), .UNSPECIFIED.);
#1480 = EDGE_CURVE ('', #1420, #1440, #1470, .T.);
#1490 = ORIENTED_EDGE ('', *, *, #1480, .F.);
#1500 = CARTESIAN_POINT ('', (6., 8.3, -5.7));
#1510 = VERTEX_POINT ('', #1500);
#1520 = CARTESIAN_POINT ('', (6., 8.3, -5.7));
#1530 = CARTESIAN_POINT ('', (6., 8.3, -7.45079230508252));
#1540 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1520, #1530), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.761214045688053), .UNSPECIFIED.);
#1550 = EDGE_CURVE ('', #1510, #1420, #1540, .T.);
#1560 = ORIENTED_EDGE ('', *, *, #1550, .F.);
#1570 = CARTESIAN_POINT ('', (6., -11., -5.7));
#1580 = CARTESIAN_POINT ('', (6., 8.3, -5.7));
#1590 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1570, #1580), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1600 = EDGE_CURVE ('', #250, #1510, #1590, .T.);
#1610 = ORIENTED_EDGE ('', *, *, #1600, .F.);
#1620 = ORIENTED_EDGE ('', *, *, #290, .T.);
#1630 = ORIENTED_EDGE ('', *, *, #700, .T.);
#1640 = CARTESIAN_POINT ('', (6., 9.67535044952597, 0.));
#1650 = CARTESIAN_POINT ('', (6., 8.36157473848496, -7.45079230508252));
#1660 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1640, #1650), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.931349038135315), .UNSPECIFIED.);
#1670 = EDGE_CURVE ('', #610, #1440, #1660, .T.);
#1680 = ORIENTED_EDGE ('', *, *, #1670, .T.);
#1690 = EDGE_LOOP ('', (#1490, #1560, #1610, #1620, #1630, #1680));
#1700 = FACE_OUTER_BOUND ('', #1690, .F.);
#1710 = CARTESIAN_POINT ('', (6., 9.67535044952597, -7.45079230508252));
#1720 = CARTESIAN_POINT ('', (6., 9.67535044952597, 0.));
#1730 = CARTESIAN_POINT ('', (6., -11., -7.45079230508252));
#1740 = CARTESIAN_POINT ('', (6., -11., 0.));
#1750 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1710, #1720), (#1730, #1740)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.0760822114450424, 0.923917788554957), (0.35849311272336, 0.664028286568531), .UNSPECIFIED.);
#1760 = ADVANCED_FACE ('', (#1700), #1750, .F.);
#1770 = CARTESIAN_POINT ('', (-6., 12.7, -5.7));
#1780 = VERTEX_POINT ('', #1770);
#1790 = CARTESIAN_POINT ('', (-6., 12.7, -5.7));
#1800 = CARTESIAN_POINT ('', (-6., -11., -5.7));
#1810 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1790, #1800), .UNSPECIFIED., .F., .U., (2, 2), (-0.227979274611399, 1.), .UNSPECIFIED.);
#1820 = EDGE_CURVE ('', #1780, #20, #1810, .T.);
#1830 = ORIENTED_EDGE ('', *, *, #1820, .F.);
#1840 = CARTESIAN_POINT ('', (-6., 12.7, 0.));
#1850 = CARTESIAN_POINT ('', (-6., 12.7, -5.7));
#1860 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1840, #1850), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.7125), .UNSPECIFIED.);
#1870 = EDGE_CURVE ('', #740, #1780, #1860, .T.);
#1880 = ORIENTED_EDGE ('', *, *, #1870, .F.);
#1890 = ORIENTED_EDGE ('', *, *, #780, .F.);
#1900 = ORIENTED_EDGE ('', *, *, #150, .T.);
#1910 = EDGE_LOOP ('', (#1830, #1880, #1890, #1900));
#1920 = FACE_OUTER_BOUND ('', #1910, .F.);
#1930 = CARTESIAN_POINT ('', (-6., -11., 0.));
#1940 = CARTESIAN_POINT ('', (-6., 12.7, 0.));
#1950 = CARTESIAN_POINT ('', (-6., -11., -5.7));
#1960 = CARTESIAN_POINT ('', (-6., 12.7, -5.7));
#1970 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1930, #1940), (#1950, #1960)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 0.7125), (0., 1.), .UNSPECIFIED.);
#1980 = ADVANCED_FACE ('', (#1920), #1970, .F.);
#1990 = CARTESIAN_POINT ('', (16., 8.3, -7.8));
#2000 = VERTEX_POINT ('', #1990);
#2010 = CARTESIAN_POINT ('', (6., 8.36157473848496, -7.45079230508252));
#2020 = CARTESIAN_POINT ('', (16., 8.3, -7.8));
#2030 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2010, #2020), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2040 = EDGE_CURVE ('', #1440, #2000, #2030, .T.);
#2050 = ORIENTED_EDGE ('', *, *, #2040, .F.);
#2060 = ORIENTED_EDGE ('', *, *, #1670, .F.);
#2070 = ORIENTED_EDGE ('', *, *, #650, .F.);
#2080 = ORIENTED_EDGE ('', *, *, #1150, .T.);
#2090 = CARTESIAN_POINT ('', (16., 8.38463695074006, -7.32));
#2100 = CARTESIAN_POINT ('', (16., 8.3, -7.8));
#2110 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2090, #2100), .UNSPECIFIED., .F., .U., (2, 2), (0.915, 0.975), .UNSPECIFIED.);
#2120 = EDGE_CURVE ('', #1100, #2000, #2110, .T.);
#2130 = ORIENTED_EDGE ('', *, *, #2120, .T.);
#2140 = EDGE_LOOP ('', (#2050, #2060, #2070, #2080, #2130));
#2150 = FACE_OUTER_BOUND ('', #2140, .F.);
#2160 = CARTESIAN_POINT ('', (16., 9.67535044952597, 0.));
#2170 = CARTESIAN_POINT ('', (6., 9.67535044952597, 0.));
#2180 = CARTESIAN_POINT ('', (16., 8.3, -7.8));
#2190 = CARTESIAN_POINT ('', (6., 8.3, -7.8));
#2200 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2160, #2170), (#2180, #2190)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 0.975), (0., 1.), .UNSPECIFIED.);
#2210 = ADVANCED_FACE ('', (#2150), #2200, .F.);
#2220 = CARTESIAN_POINT ('', (16., 12.7, -7.8));
#2230 = VERTEX_POINT ('', #2220);
#2240 = CARTESIAN_POINT ('', (16., 8.29999999999999, -7.8));
#2250 = CARTESIAN_POINT ('', (16., 12.7, -7.8));
#2260 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2240, #2250), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2270 = EDGE_CURVE ('', #2000, #2230, #2260, .T.);
#2280 = ORIENTED_EDGE ('', *, *, #2270, .F.);
#2290 = ORIENTED_EDGE ('', *, *, #2120, .F.);
#2300 = ORIENTED_EDGE ('', *, *, #1290, .T.);
#2310 = CARTESIAN_POINT ('', (16., 12.7, -7.32));
#2320 = CARTESIAN_POINT ('', (16., 12.7, -7.8));
#2330 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2310, #2320), .UNSPECIFIED., .F., .U., (2, 2), (0.915, 0.975), .UNSPECIFIED.);
#2340 = EDGE_CURVE ('', #1190, #2230, #2330, .T.);
#2350 = ORIENTED_EDGE ('', *, *, #2340, .T.);
#2360 = EDGE_LOOP ('', (#2280, #2290, #2300, #2350));
#2370 = FACE_OUTER_BOUND ('', #2360, .F.);
#2380 = CARTESIAN_POINT ('', (16., 8.29999999999999, -7.32));
#2390 = CARTESIAN_POINT ('', (16., 8.29999999999999, -7.8));
#2400 = CARTESIAN_POINT ('', (16., 12.7, -7.32));
#2410 = CARTESIAN_POINT ('', (16., 12.7, -7.8));
#2420 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2380, #2390), (#2400, #2410)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.814345991561181, 1.), (0.914999999999999, 0.975), .UNSPECIFIED.);
#2430 = ADVANCED_FACE ('', (#2370), #2420, .F.);
#2440 = CARTESIAN_POINT ('', (4., 8.3, -5.7));
#2450 = VERTEX_POINT ('', #2440);
#2460 = CARTESIAN_POINT ('', (4., 8.3, -7.38095076609903));
#2470 = VERTEX_POINT ('', #2460);
#2480 = CARTESIAN_POINT ('', (4., 8.3, -5.7));
#2490 = CARTESIAN_POINT ('', (4., 8.3, -7.38095076609903));
#2500 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2480, #2490), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2510 = EDGE_CURVE ('', #2450, #2470, #2500, .T.);
#2520 = ORIENTED_EDGE ('', *, *, #2510, .F.);
#2530 = CARTESIAN_POINT ('', (6., 8.3, -5.7));
#2540 = CARTESIAN_POINT ('', (4., 8.3, -5.7));
#2550 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2530, #2540), .UNSPECIFIED., .F., .U., (2, 2), (0.4, 0.48), .UNSPECIFIED.);
#2560 = EDGE_CURVE ('', #1510, #2450, #2550, .T.);
#2570 = ORIENTED_EDGE ('', *, *, #2560, .F.);
#2580 = ORIENTED_EDGE ('', *, *, #1550, .T.);
#2590 = CARTESIAN_POINT ('', (4., 8.3, -7.38095076609903));
#2600 = CARTESIAN_POINT ('', (6., 8.3, -7.45079230508252));
#2610 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2590, #2600), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.166666666666667), .UNSPECIFIED.);
#2620 = EDGE_CURVE ('', #2470, #1420, #2610, .T.);
#2630 = ORIENTED_EDGE ('', *, *, #2620, .F.);
#2640 = EDGE_LOOP ('', (#2520, #2570, #2580, #2630));
#2650 = FACE_OUTER_BOUND ('', #2640, .F.);
#2660 = CARTESIAN_POINT ('', (6., 8.3, -5.7));
#2670 = CARTESIAN_POINT ('', (4., 8.3, -5.7));
#2680 = CARTESIAN_POINT ('', (6., 8.3, -7.45079230508252));
#2690 = CARTESIAN_POINT ('', (4., 8.3, -7.45079230508252));
#2700 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2660, #2670), (#2680, #2690)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 0.761214045688053), (0.4, 0.48), .UNSPECIFIED.);
#2710 = ADVANCED_FACE ('', (#2650), #2700, .F.);
#2720 = CARTESIAN_POINT ('', (4., 12.7, -7.38095076609902));
#2730 = VERTEX_POINT ('', #2720);
#2740 = CARTESIAN_POINT ('', (4., 12.7, -5.7));
#2750 = VERTEX_POINT ('', #2740);
#2760 = CARTESIAN_POINT ('', (4., 12.7, -7.38095076609903));
#2770 = CARTESIAN_POINT ('', (4., 12.7, -5.7));
#2780 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2760, #2770), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2790 = EDGE_CURVE ('', #2730, #2750, #2780, .T.);
#2800 = ORIENTED_EDGE ('', *, *, #2790, .F.);
#2810 = CARTESIAN_POINT ('', (16., 12.7, -7.8));
#2820 = CARTESIAN_POINT ('', (4., 12.7, -7.38095076609902));
#2830 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2810, #2820), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2840 = EDGE_CURVE ('', #2230, #2730, #2830, .T.);
#2850 = ORIENTED_EDGE ('', *, *, #2840, .F.);
#2860 = ORIENTED_EDGE ('', *, *, #2340, .F.);
#2870 = ORIENTED_EDGE ('', *, *, #1240, .F.);
#2880 = ORIENTED_EDGE ('', *, *, #830, .F.);
#2890 = ORIENTED_EDGE ('', *, *, #1870, .T.);
#2900 = CARTESIAN_POINT ('', (4., 12.7, -5.7));
#2910 = CARTESIAN_POINT ('', (-6., 12.7, -5.7));
#2920 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2900, #2910), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2930 = EDGE_CURVE ('', #2750, #1780, #2920, .T.);
#2940 = ORIENTED_EDGE ('', *, *, #2930, .F.);
#2950 = EDGE_LOOP ('', (#2800, #2850, #2860, #2870, #2880, #2890, #2940));
#2960 = FACE_OUTER_BOUND ('', #2950, .F.);
#2970 = CARTESIAN_POINT ('', (-6., 12.7, 0.));
#2980 = CARTESIAN_POINT ('', (16., 12.7, 0.));
#2990 = CARTESIAN_POINT ('', (-6., 12.7, -7.8));
#3000 = CARTESIAN_POINT ('', (16., 12.7, -7.8));
#3010 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2970, #2980), (#2990, #3000)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 0.975), (0., 1.), .UNSPECIFIED.);
#3020 = ADVANCED_FACE ('', (#2960), #3010, .F.);
#3030 = ORIENTED_EDGE ('', *, *, #2620, .T.);
#3040 = ORIENTED_EDGE ('', *, *, #1480, .T.);
#3050 = ORIENTED_EDGE ('', *, *, #2040, .T.);
#3060 = ORIENTED_EDGE ('', *, *, #2270, .T.);
#3070 = ORIENTED_EDGE ('', *, *, #2840, .T.);
#3080 = CARTESIAN_POINT ('', (4., 12.7, -7.38095076609903));
#3090 = CARTESIAN_POINT ('', (4., 8.3, -7.38095076609903));
#3100 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3080, #3090), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.181818181818182), .UNSPECIFIED.);
#3110 = EDGE_CURVE ('', #2730, #2470, #3100, .T.);
#3120 = ORIENTED_EDGE ('', *, *, #3110, .T.);
#3130 = EDGE_LOOP ('', (#3030, #3040, #3050, #3060, #3070, #3120));
#3140 = FACE_OUTER_BOUND ('', #3130, .F.);
#3150 = CARTESIAN_POINT ('', (16., 12.7, -7.8));
#3160 = CARTESIAN_POINT ('', (16., 8.29999999999999, -7.8));
#3170 = CARTESIAN_POINT ('', (4., 12.7, -7.38095076609903));
#3180 = CARTESIAN_POINT ('', (4., 8.29999999999999, -7.38095076609903));
#3190 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3150, #3160), (#3170, #3180)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 0.181818181818182), .UNSPECIFIED.);
#3200 = ADVANCED_FACE ('', (#3140), #3190, .F.);
#3210 = ORIENTED_EDGE ('', *, *, #2510, .T.);
#3220 = ORIENTED_EDGE ('', *, *, #3110, .F.);
#3230 = ORIENTED_EDGE ('', *, *, #2790, .T.);
#3240 = CARTESIAN_POINT ('', (4., 12.7, -5.7));
#3250 = CARTESIAN_POINT ('', (4., 8.3, -5.7));
#3260 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3240, #3250), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.181818181818182), .UNSPECIFIED.);
#3270 = EDGE_CURVE ('', #2750, #2450, #3260, .T.);
#3280 = ORIENTED_EDGE ('', *, *, #3270, .T.);
#3290 = EDGE_LOOP ('', (#3210, #3220, #3230, #3280));
#3300 = FACE_OUTER_BOUND ('', #3290, .F.);
#3310 = CARTESIAN_POINT ('', (4., 12.7, -7.38095076609903));
#3320 = CARTESIAN_POINT ('', (4., 8.3, -7.38095076609903));
#3330 = CARTESIAN_POINT ('', (4., 12.7, -5.7));
#3340 = CARTESIAN_POINT ('', (4., 8.3, -5.7));
#3350 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3310, #3320), (#3330, #3340)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 0.181818181818182), .UNSPECIFIED.);
#3360 = ADVANCED_FACE ('', (#3300), #3350, .F.);
#3370 = CARTESIAN_POINT ('', (-2.5, 1.14564392373896, -5.7));
#3380 = VERTEX_POINT ('', #3370);
#3390 = CARTESIAN_POINT ('', (1.23259516440783E-32, -2.75, -5.7));
#3400 = VERTEX_POINT ('', #3390);
#3410 = CARTESIAN_POINT ('', (-2.5, 1.14564392373896, -5.7));
#3420 = CARTESIAN_POINT ('', (-1.76479168388714, 2.75, -5.7));
#3430 = CARTESIAN_POINT ('', (-4.47800172228038E-16, 2.75, -5.7));
#3440 = CARTESIAN_POINT ('', (2.75, 2.75, -5.7));
#3450 = CARTESIAN_POINT ('', (2.75, 1.99855472876365E-16, -5.7));
#3460 = CARTESIAN_POINT ('', (2.75, -2.75, -5.7));
#3470 = CARTESIAN_POINT ('', (1.23259516440783E-32, -2.75, -5.7));
#3480 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#3410, #3420, #3430, #3440, #3450, #3460, #3470), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 3), (0.320756114053581, 0.5, 0.75, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.881131270969548, 0.790002725170088, 1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#3490 = EDGE_CURVE ('', #3380, #3400, #3480, .T.);
#3500 = ORIENTED_EDGE ('', *, *, #3490, .T.);
#3510 = CARTESIAN_POINT ('', (-2.5, -1.14564392373897, -5.7));
#3520 = VERTEX_POINT ('', #3510);
#3530 = CARTESIAN_POINT ('', (1.23259516440783E-32, -2.75, -5.7));
#3540 = CARTESIAN_POINT ('', (-1.76479168388714, -2.75, -5.7));
#3550 = CARTESIAN_POINT ('', (-2.5, -1.14564392373897, -5.7));
#3560 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#3530, #3540, #3550), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 0.179243885946419), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.790002725170088, 0.881131270969548))
   REPRESENTATION_ITEM ('')
);
#3570 = EDGE_CURVE ('', #3400, #3520, #3560, .T.);
#3580 = ORIENTED_EDGE ('', *, *, #3570, .T.);
#3590 = CARTESIAN_POINT ('', (-2.5, -11., -5.7));
#3600 = CARTESIAN_POINT ('', (-2.5, -1.14564392373897, -5.7));
#3610 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3590, #3600), .UNSPECIFIED., .F., .U., (2, 2), (0.0267379679144385, 0.553708881083478), .UNSPECIFIED.);
#3620 = EDGE_CURVE ('', #320, #3520, #3610, .T.);
#3630 = ORIENTED_EDGE ('', *, *, #3620, .F.);
#3640 = ORIENTED_EDGE ('', *, *, #360, .T.);
#3650 = ORIENTED_EDGE ('', *, *, #1600, .T.);
#3660 = ORIENTED_EDGE ('', *, *, #2560, .T.);
#3670 = ORIENTED_EDGE ('', *, *, #3270, .F.);
#3680 = ORIENTED_EDGE ('', *, *, #2930, .T.);
#3690 = ORIENTED_EDGE ('', *, *, #1820, .T.);
#3700 = ORIENTED_EDGE ('', *, *, #80, .T.);
#3710 = CARTESIAN_POINT ('', (-5.5, 7.2, -5.7));
#3720 = VERTEX_POINT ('', #3710);
#3730 = CARTESIAN_POINT ('', (-5.5, -11., -5.7));
#3740 = CARTESIAN_POINT ('', (-5.5, 7.2, -5.7));
#3750 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3730, #3740), .UNSPECIFIED., .F., .U., (2, 2), (0.0267379679144385, 1.), .UNSPECIFIED.);
#3760 = EDGE_CURVE ('', #40, #3720, #3750, .T.);
#3770 = ORIENTED_EDGE ('', *, *, #3760, .T.);
#3780 = CARTESIAN_POINT ('', (-2.5, 7.2, -5.7));
#3790 = VERTEX_POINT ('', #3780);
#3800 = CARTESIAN_POINT ('', (-5.5, 7.2, -5.7));
#3810 = CARTESIAN_POINT ('', (-2.5, 7.2, -5.7));
#3820 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3800, #3810), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3830 = EDGE_CURVE ('', #3720, #3790, #3820, .T.);
#3840 = ORIENTED_EDGE ('', *, *, #3830, .T.);
#3850 = CARTESIAN_POINT ('', (-2.5, 1.14564392373896, -5.7));
#3860 = CARTESIAN_POINT ('', (-2.5, 7.2, -5.7));
#3870 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3850, #3860), .UNSPECIFIED., .F., .U., (2, 2), (0.676237642980693, 1.), .UNSPECIFIED.);
#3880 = EDGE_CURVE ('', #3380, #3790, #3870, .T.);
#3890 = ORIENTED_EDGE ('', *, *, #3880, .F.);
#3900 = EDGE_LOOP ('', (#3500, #3580, #3630, #3640, #3650, #3660, #3670, #3680, #3690, #3700, #3770, #3840, #3890));
#3910 = FACE_OUTER_BOUND ('', #3900, .F.);
#3920 = CARTESIAN_POINT ('', (6.00000000000001, -11., -5.7));
#3930 = CARTESIAN_POINT ('', (-6., -11., -5.7));
#3940 = CARTESIAN_POINT ('', (6.00000000000001, 12.7, -5.7));
#3950 = CARTESIAN_POINT ('', (-6., 12.7, -5.7));
#3960 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3920, #3930), (#3940, #3950)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-8.88178419700125E-17, 1.2279792746114), (0.4, 0.88), .UNSPECIFIED.);
#3970 = ADVANCED_FACE ('', (#3910), #3960, .F.);
#3980 = ORIENTED_EDGE ('', *, *, #410, .T.);
#3990 = CARTESIAN_POINT ('', (-2.5, -11.5, -5.7));
#4000 = VERTEX_POINT ('', #3990);
#4010 = CARTESIAN_POINT ('', (-2.5, -11.5, -5.7));
#4020 = CARTESIAN_POINT ('', (-2.5, -11., -5.7));
#4030 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4010, #4020), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.0267379679144385), .UNSPECIFIED.);
#4040 = EDGE_CURVE ('', #4000, #320, #4030, .T.);
#4050 = ORIENTED_EDGE ('', *, *, #4040, .F.);
#4060 = CARTESIAN_POINT ('', (-5.5, -11.5, -5.7));
#4070 = VERTEX_POINT ('', #4060);
#4080 = CARTESIAN_POINT ('', (-5.5, -11.5, -5.7));
#4090 = CARTESIAN_POINT ('', (-2.5, -11.5, -5.7));
#4100 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4080, #4090), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4110 = EDGE_CURVE ('', #4070, #4000, #4100, .T.);
#4120 = ORIENTED_EDGE ('', *, *, #4110, .F.);
#4130 = CARTESIAN_POINT ('', (-5.5, -11.5, -5.7));
#4140 = CARTESIAN_POINT ('', (-5.5, -11., -5.7));
#4150 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4130, #4140), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.0267379679144385), .UNSPECIFIED.);
#4160 = EDGE_CURVE ('', #4070, #40, #4150, .T.);
#4170 = ORIENTED_EDGE ('', *, *, #4160, .T.);
#4180 = EDGE_LOOP ('', (#3980, #4050, #4120, #4170));
#4190 = FACE_OUTER_BOUND ('', #4180, .F.);
#4200 = CARTESIAN_POINT ('', (-5.5, -11.5, -5.7));
#4210 = CARTESIAN_POINT ('', (-2.5, -11.5, -5.7));
#4220 = CARTESIAN_POINT ('', (-5.5, -11., -5.7));
#4230 = CARTESIAN_POINT ('', (-2.5, -11., -5.7));
#4240 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4200, #4210), (#4220, #4230)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 0.0267379679144385), (0., 1.), .UNSPECIFIED.);
#4250 = ADVANCED_FACE ('', (#4190), #4240, .F.);
#4260 = CARTESIAN_POINT ('', (-5.5, -11.5, -6.5));
#4270 = VERTEX_POINT ('', #4260);
#4280 = CARTESIAN_POINT ('', (-5.5, -11.5, -6.5));
#4290 = CARTESIAN_POINT ('', (-5.5, -11.5, -5.7));
#4300 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4280, #4290), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4310 = EDGE_CURVE ('', #4270, #4070, #4300, .T.);
#4320 = ORIENTED_EDGE ('', *, *, #4310, .F.);
#4330 = CARTESIAN_POINT ('', (-5.5, 7.2, -6.5));
#4340 = VERTEX_POINT ('', #4330);
#4350 = CARTESIAN_POINT ('', (-5.5, -11.5, -6.5));
#4360 = CARTESIAN_POINT ('', (-5.5, 7.2, -6.5));
#4370 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4350, #4360), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4380 = EDGE_CURVE ('', #4270, #4340, #4370, .T.);
#4390 = ORIENTED_EDGE ('', *, *, #4380, .T.);
#4400 = CARTESIAN_POINT ('', (-5.5, 7.2, -6.5));
#4410 = CARTESIAN_POINT ('', (-5.5, 7.2, -5.7));
#4420 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4400, #4410), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4430 = EDGE_CURVE ('', #4340, #3720, #4420, .T.);
#4440 = ORIENTED_EDGE ('', *, *, #4430, .T.);
#4450 = ORIENTED_EDGE ('', *, *, #3760, .F.);
#4460 = ORIENTED_EDGE ('', *, *, #4160, .F.);
#4470 = EDGE_LOOP ('', (#4320, #4390, #4440, #4450, #4460));
#4480 = FACE_OUTER_BOUND ('', #4470, .F.);
#4490 = CARTESIAN_POINT ('', (-5.5, -11.5, -6.5));
#4500 = CARTESIAN_POINT ('', (-5.5, -11.5, -5.7));
#4510 = CARTESIAN_POINT ('', (-5.5, 7.2, -6.5));
#4520 = CARTESIAN_POINT ('', (-5.5, 7.2, -5.7));
#4530 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4490, #4500), (#4510, #4520)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#4540 = ADVANCED_FACE ('', (#4480), #4530, .F.);
#4550 = ORIENTED_EDGE ('', *, *, #4430, .F.);
#4560 = CARTESIAN_POINT ('', (-2.5, 7.2, -6.5));
#4570 = VERTEX_POINT ('', #4560);
#4580 = CARTESIAN_POINT ('', (-5.5, 7.2, -6.5));
#4590 = CARTESIAN_POINT ('', (-5.5, 7.2, -8.));
#4600 = CARTESIAN_POINT ('', (-4., 7.2, -8.));
#4610 = CARTESIAN_POINT ('', (-2.5, 7.2, -8.));
#4620 = CARTESIAN_POINT ('', (-2.5, 7.2, -6.5));
#4630 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#4580, #4590, #4600, #4610, #4620), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 0.5, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#4640 = EDGE_CURVE ('', #4340, #4570, #4630, .T.);
#4650 = ORIENTED_EDGE ('', *, *, #4640, .T.);
#4660 = CARTESIAN_POINT ('', (-2.5, 7.2, -5.7));
#4670 = CARTESIAN_POINT ('', (-2.5, 7.2, -6.5));
#4680 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4660, #4670), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4690 = EDGE_CURVE ('', #3790, #4570, #4680, .T.);
#4700 = ORIENTED_EDGE ('', *, *, #4690, .F.);
#4710 = ORIENTED_EDGE ('', *, *, #3830, .F.);
#4720 = EDGE_LOOP ('', (#4550, #4650, #4700, #4710));
#4730 = FACE_OUTER_BOUND ('', #4720, .F.);
#4740 = CARTESIAN_POINT ('', (-2.5, 7.2, -8.));
#4750 = CARTESIAN_POINT ('', (-5.5, 7.2, -8.));
#4760 = CARTESIAN_POINT ('', (-2.5, 7.2, -5.7));
#4770 = CARTESIAN_POINT ('', (-5.5, 7.2, -5.7));
#4780 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4740, #4750), (#4760, #4770)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.223440207428575, 0.776559792571425), (0.139269835776402, 0.860730164223598), .UNSPECIFIED.);
#4790 = ADVANCED_FACE ('', (#4730), #4780, .F.);
#4800 = ORIENTED_EDGE ('', *, *, #4310, .T.);
#4810 = ORIENTED_EDGE ('', *, *, #4110, .T.);
#4820 = CARTESIAN_POINT ('', (-2.5, -11.5, -6.5));
#4830 = VERTEX_POINT ('', #4820);
#4840 = CARTESIAN_POINT ('', (-2.5, -11.5, -5.7));
#4850 = CARTESIAN_POINT ('', (-2.5, -11.5, -6.5));
#4860 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4840, #4850), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4870 = EDGE_CURVE ('', #4000, #4830, #4860, .T.);
#4880 = ORIENTED_EDGE ('', *, *, #4870, .T.);
#4890 = CARTESIAN_POINT ('', (-5.5, -11.5, -6.5));
#4900 = CARTESIAN_POINT ('', (-5.5, -11.5, -8.));
#4910 = CARTESIAN_POINT ('', (-4., -11.5, -8.));
#4920 = CARTESIAN_POINT ('', (-2.5, -11.5, -8.));
#4930 = CARTESIAN_POINT ('', (-2.5, -11.5, -6.5));
#4940 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#4890, #4900, #4910, #4920, #4930), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 0.5, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#4950 = EDGE_CURVE ('', #4270, #4830, #4940, .T.);
#4960 = ORIENTED_EDGE ('', *, *, #4950, .F.);
#4970 = EDGE_LOOP ('', (#4800, #4810, #4880, #4960));
#4980 = FACE_OUTER_BOUND ('', #4970, .F.);
#4990 = CARTESIAN_POINT ('', (-2.5, -11.5, -8.));
#5000 = CARTESIAN_POINT ('', (-2.5, -11.5, -5.7));
#5010 = CARTESIAN_POINT ('', (-5.5, -11.5, -8.));
#5020 = CARTESIAN_POINT ('', (-5.5, -11.5, -5.7));
#5030 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4990, #5000), (#5010, #5020)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.139269835776402, 0.860730164223598), (0.223440207428575, 0.776559792571425), .UNSPECIFIED.);
#5040 = ADVANCED_FACE ('', (#4980), #5030, .F.);
#5050 = CARTESIAN_POINT ('', (-2.5, 1.14564392373897, -6.5));
#5060 = VERTEX_POINT ('', #5050);
#5070 = CARTESIAN_POINT ('', (-2.5, -1.14564392373897, -6.5));
#5080 = VERTEX_POINT ('', #5070);
#5090 = CARTESIAN_POINT ('', (-2.5, 1.14564392373897, -6.50000000000001));
#5100 = CARTESIAN_POINT ('', (-2.5, 1.14564392373897, -6.52943199771656));
#5110 = CARTESIAN_POINT ('', (-2.50087404267913, 1.14374215554963, -6.55893597041115));
#5120 = CARTESIAN_POINT ('', (-2.50258803204035, 1.13997944801141, -6.58807609330106));
#5130 = CARTESIAN_POINT ('', (-2.50430079758479, 1.13621942710868, -6.6171954096607));
#5140 = CARTESIAN_POINT ('', (-2.50685979101768, 1.13058375413279, -6.64609118606852));
#5150 = CARTESIAN_POINT ('', (-2.51016877101991, 1.12318864889048, -6.67436430011795));
#5160 = CARTESIAN_POINT ('', (-2.5134745132344, 1.1158007796487, -6.70260974934566));
#5170 = CARTESIAN_POINT ('', (-2.51754253741373, 1.10662457862713, -6.73036226735985));
#5180 = CARTESIAN_POINT ('', (-2.52223021963016, 1.09583516971504, -6.75728675874526));
#5190 = CARTESIAN_POINT ('', (-2.52691263361581, 1.08505788643212, -6.78418099116092));
#5200 = CARTESIAN_POINT ('', (-2.53223135891244, 1.07262771786372, -6.81036139509968));
#5210 = CARTESIAN_POINT ('', (-2.53801763097827, 1.05875705657316, -6.83557048837699));
#5220 = CARTESIAN_POINT ('', (-2.54379721975867, 1.04490241623484, -6.86075046453645));
#5230 = CARTESIAN_POINT ('', (-2.55006337672787, 1.0295608756575, -6.88505533440909));
#5240 = CARTESIAN_POINT ('', (-2.55664047117211, 1.01296075993339, -6.9083053643313));
#5250 = CARTESIAN_POINT ('', (-2.5632103315876, 0.996378902380197, -6.93152982196069));
#5260 = CARTESIAN_POINT ('', (-2.57011064847072, 0.978489153976925, -6.9537775395001));
#5270 = CARTESIAN_POINT ('', (-2.57717367237709, 0.959518557614396, -6.97493709206911));
#5280 = CARTESIAN_POINT ('', (-2.58422967861952, 0.940566810015748, -6.9960756209759));
#5290 = CARTESIAN_POINT ('', (-2.59146697359996, 0.920485007297479, -7.01618756693815));
#5300 = CARTESIAN_POINT ('', (-2.59873479820682, 0.899487325418755, -7.03521568945938));
#5310 = CARTESIAN_POINT ('', (-2.60599632336343, 0.878507843463564, -7.05422731918979));
#5320 = CARTESIAN_POINT ('', (-2.61330513330685, 0.856565388038233, -7.07220266967247));
#5330 = CARTESIAN_POINT ('', (-2.62053159653265, 0.833854994332964, -7.08912386120003));
#5340 = CARTESIAN_POINT ('', (-2.63137206238, 0.799786980748849, -7.11450745385375));
#5350 = CARTESIAN_POINT ('', (-2.64206170688228, 0.763869958063629, -7.13760688915177));
#5360 = CARTESIAN_POINT ('', (-2.65225272203109, 0.726674272613698, -7.15846584932507));
#5370 = CARTESIAN_POINT ('', (-2.66242872306673, 0.689533386437737, -7.17929407862571));
#5380 = CARTESIAN_POINT ('', (-2.67214519148899, 0.650984323874547, -7.19796777836538));
#5390 = CARTESIAN_POINT ('', (-2.68115157208631, 0.611495091966503, -7.21458996927579));
#5400 = CARTESIAN_POINT ('', (-2.69014767714479, 0.572050914021199, -7.23119319563475));
#5410 = CARTESIAN_POINT ('', (-2.69846295058096, 0.531552573972716, -7.24580089576334));
#5420 = CARTESIAN_POINT ('', (-2.70592361284496, 0.49038495230593, -7.25852903979198));
#5430 = CARTESIAN_POINT ('', (-2.71337760163257, 0.44925415460213, -7.27124579864252));
#5440 = CARTESIAN_POINT ('', (-2.71999804468852, 0.407352718860395, -7.28211928473223));
#5450 = CARTESIAN_POINT ('', (-2.72566914681605, 0.365003701481293, -7.29125272613967));
#5460 = CARTESIAN_POINT ('', (-2.73133620556071, 0.322684878108195, -7.30037965558529));
#5470 = CARTESIAN_POINT ('', (-2.73606838369152, 0.279826378146826, -7.30778960352078));
#5480 = CARTESIAN_POINT ('', (-2.7397935945467, 0.236708806935608, -7.31355996438767));
#5490 = CARTESIAN_POINT ('', (-2.74351666690028, 0.193615987879052, -7.31932701271025));
#5500 = CARTESIAN_POINT ('', (-2.74624181241227, 0.150178100146026, -7.32346816465146));
#5510 = CARTESIAN_POINT ('', (-2.74793118338051, 0.106649947984101, -7.32602886054245));
#5520 = CARTESIAN_POINT ('', (-2.74905823132132, 0.0776105509635414, -7.32773720470442));
#5530 = CARTESIAN_POINT ('', (-2.74972637305611, 0.0485000287334471, -7.32874362482569));
#5540 = CARTESIAN_POINT ('', (-2.74993163375126, 0.0193909693966331, -7.32905312236562));
#5550 = CARTESIAN_POINT ('', (-2.75002305590777, 0.00642593010045134, -7.32919097112675));
#5560 = CARTESIAN_POINT ('', (-2.75002278151496, -0.00654228720947637, -7.32919055768746));
#5570 = CARTESIAN_POINT ('', (-2.74993081089473, -0.0195073138041992, -7.32905188163932));
#5580 = CARTESIAN_POINT ('', (-2.74961846431063, -0.0635385681286422, -7.3285809161307));
#5590 = CARTESIAN_POINT ('', (-2.74824496809378, -0.107587670954525, -7.32651602258959));
#5600 = CARTESIAN_POINT ('', (-2.74582911052551, -0.15140176944374, -7.32283374991231));
#5610 = CARTESIAN_POINT ('', (-2.74341408876854, -0.195200709622523, -7.31915275118643));
#5620 = CARTESIAN_POINT ('', (-2.73995240929015, -0.238850811121758, -7.31384811727016));
#5630 = CARTESIAN_POINT ('', (-2.73549429939764, -0.282083211061915, -7.30686140888267));
#5640 = CARTESIAN_POINT ('', (-2.73103782350221, -0.325299765359711, -7.29987726128021));
#5650 = CARTESIAN_POINT ('', (-2.72557579320178, -0.368189327869735, -7.29119729523937));
#5660 = CARTESIAN_POINT ('', (-2.71919649452923, -0.410451488168763, -7.28073195167982));
#5670 = CARTESIAN_POINT ('', (-2.7128196534183, -0.452697367389157, -7.2702706397902));
#5680 = CARTESIAN_POINT ('', (-2.70551066647593, -0.494414254539623, -7.25800028343192));
#5690 = CARTESIAN_POINT ('', (-2.69740706620474, -0.535252388307374, -7.24380887923353));
#5700 = CARTESIAN_POINT ('', (-2.68930678963742, -0.576073772252989, -7.22962329566097));
#5710 = CARTESIAN_POINT ('', (-2.6803898719238, -0.616126110811819, -7.21347875069444));
#5720 = CARTESIAN_POINT ('', (-2.67085902198439, -0.654990140906407, -7.19525841279318));
#5730 = CARTESIAN_POINT ('', (-2.66133249258545, -0.693836553095377, -7.17704633456527));
#5740 = CARTESIAN_POINT ('', (-2.65116106338396, -0.731619472342003, -7.15669918919906));
#5750 = CARTESIAN_POINT ('', (-2.64063205376103, -0.767829640382439, -7.13412836771274));
#5760 = CARTESIAN_POINT ('', (-2.63010865540473, -0.804020510795177, -7.11156957498335));
#5770 = CARTESIAN_POINT ('', (-2.61918599114355, -0.838781676801763, -7.08669552959686));
#5780 = CARTESIAN_POINT ('', (-2.60825397849457, -0.871499388219668, -7.0595024679336));
#5790 = CARTESIAN_POINT ('', (-2.597329333006, -0.904195050941139, -7.03232773186635));
#5800 = CARTESIAN_POINT ('', (-2.58634219027923, -0.935008947287446, -7.00269485471847));
#5810 = CARTESIAN_POINT ('', (-2.57578964789611, -0.963227745546842, -6.97077050986663));
#5820 = CARTESIAN_POINT ('', (-2.56524661436381, -0.991421115967758, -6.93887493190545));
#5830 = CARTESIAN_POINT ('', (-2.55507558816991, -1.01719412076326, -6.90448329354905));
#5840 = CARTESIAN_POINT ('', (-2.54585161642501, -1.03977860487036, -6.86803869164292));
#5850 = CARTESIAN_POINT ('', (-2.53971572838897, -1.0548020535176, -6.8437953393215));
#5860 = CARTESIAN_POINT ('', (-2.53397439319449, -1.06847894976487, -6.81854875560853));
#5870 = CARTESIAN_POINT ('', (-2.52879870945109, -1.08059108226865, -6.79251796985345));
#5880 = CARTESIAN_POINT ('', (-2.52362691266541, -1.09269411851591, -6.7665067333152));
#5890 = CARTESIAN_POINT ('', (-2.51900102962042, -1.10328059874456, -6.73961013404494));
#5900 = CARTESIAN_POINT ('', (-2.51507445316256, -1.11216028298489, -6.71212288973497));
#5910 = CARTESIAN_POINT ('', (-2.5111510240393, -1.12103284974319, -6.6846576777363));
#5920 = CARTESIAN_POINT ('', (-2.50791016800757, -1.1282383074279, -6.65648405854948));
#5930 = CARTESIAN_POINT ('', (-2.50546827288733, -1.13363518539033, -6.62796451325895));
#5940 = CARTESIAN_POINT ('', (-2.50302830345634, -1.13902780735103, -6.59946745860739));
#5950 = CARTESIAN_POINT ('', (-2.50137573524945, -1.14263868009708, -6.57049362723783));
#5960 = CARTESIAN_POINT ('', (-2.50057287611416, -1.14439297937472, -6.54145238419449));
#5970 = CARTESIAN_POINT ('', (-2.50019151598685, -1.14522627598487, -6.52765772002811));
#5980 = CARTESIAN_POINT ('', (-2.5, -1.14564392373897, -6.51382507064178));
#5990 = CARTESIAN_POINT ('', (-2.5, -1.14564392373897, -6.50000000000001));
#6000 = B_SPLINE_CURVE_WITH_KNOTS ('', 3, (#5090, #5100, #5110, #5120, #5130, #5140, #5150, #5160, #5170, #5180, #5190, #5200, #5210, #5220, #5230, #5240, #5250, #5260, #5270, #5280, #5290, #5300, #5310, #5320, #5330, #5340, #5350, #5360, #5370, #5380, #5390, #5400, #5410, #5420, #5430, #5440, #5450, #5460, #5470, #5480, #5490, #5500, #5510, #5520, #5530, #5540, #5550, #5560, #5570, #5580, #5590, #5600, #5610, #5620, #5630, #5640, #5650, #5660, #5670, #5680, #5690, #5700, #5710, #5720, #5730, #5740, #5750, #5760, #5770, #5780, #5790, #5800, #5810, #5820, #5830, #5840, #5850, #5860, #5870, #5880, #5890, #5900, #5910, #5920, #5930, #5940, #5950, #5960, #5970, #5980, #5990), .UNSPECIFIED., .F., .U., (4, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 4), (0., 0.0882959931496649, 0.176528941498175, 0.264675555218589, 0.352723105759709, 0.440668959231557, 0.528518082629313, 0.616279921086074, 0.703965691205465, 0.83550370178904, 0.966847921415618, 1.09804228810024, 1.22911930293631, 1.36010286247123, 1.49101122933567, 1.57834551415778, 1.6172437973871, 1.74934843976028, 1.8814073780508, 2.01341791378422, 2.14537759376636, 2.27728315028681, 2.40912891116487, 2.54090440696147, 2.67259109832224, 2.80415912736837, 2.891679635635, 2.9791344156747, 3.06651909661983, 3.15383486562088, 3.19531007754621), .UNSPECIFIED.);
#6010 = EDGE_CURVE ('', #5060, #5080, #6000, .T.);
#6020 = ORIENTED_EDGE ('', *, *, #6010, .F.);
#6030 = CARTESIAN_POINT ('', (-2.5, 1.14564392373896, -6.5));
#6040 = CARTESIAN_POINT ('', (-2.5, 7.2, -6.5));
#6050 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#6030, #6040), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0.676237642980693, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#6060 = EDGE_CURVE ('', #5060, #4570, #6050, .T.);
#6070 = ORIENTED_EDGE ('', *, *, #6060, .T.);
#6080 = ORIENTED_EDGE ('', *, *, #4640, .F.);
#6090 = ORIENTED_EDGE ('', *, *, #4380, .F.);
#6100 = ORIENTED_EDGE ('', *, *, #4950, .T.);
#6110 = CARTESIAN_POINT ('', (-2.5, -11.5, -6.5));
#6120 = CARTESIAN_POINT ('', (-2.5, -1.14564392373897, -6.5));
#6130 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#6110, #6120), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 0.553708881083478), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#6140 = EDGE_CURVE ('', #4830, #5080, #6130, .T.);
#6150 = ORIENTED_EDGE ('', *, *, #6140, .T.);
#6160 = EDGE_LOOP ('', (#6020, #6070, #6080, #6090, #6100, #6150));
#6170 = FACE_OUTER_BOUND ('', #6160, .F.);
#6180 = CARTESIAN_POINT ('', (-5.5, -11.5, -6.5));
#6190 = CARTESIAN_POINT ('', (-5.5, 7.2, -6.5));
#6200 = CARTESIAN_POINT ('', (-5.5, -11.5, -8.));
#6210 = CARTESIAN_POINT ('', (-5.5, 7.2, -8.));
#6220 = CARTESIAN_POINT ('', (-4., -11.5, -8.));
#6230 = CARTESIAN_POINT ('', (-4., 7.2, -8.));
#6240 = CARTESIAN_POINT ('', (-2.5, -11.5, -8.));
#6250 = CARTESIAN_POINT ('', (-2.5, 7.2, -8.));
#6260 = CARTESIAN_POINT ('', (-2.5, -11.5, -6.5));
#6270 = CARTESIAN_POINT ('', (-2.5, 7.2, -6.5));
#6280 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#6180, #6190), (#6200, #6210), (#6220, #6230), (#6240, #6250), (#6260, #6270)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 3), (2, 2), (0., 0.5, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#6290 = ADVANCED_FACE ('', (#6170), #6280, .F.);
#6300 = ORIENTED_EDGE ('', *, *, #3490, .F.);
#6310 = CARTESIAN_POINT ('', (-2.5, 1.14564392373896, -6.5));
#6320 = CARTESIAN_POINT ('', (-2.5, 1.14564392373896, -5.7));
#6330 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6310, #6320), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6340 = EDGE_CURVE ('', #5060, #3380, #6330, .T.);
#6350 = ORIENTED_EDGE ('', *, *, #6340, .F.);
#6360 = ORIENTED_EDGE ('', *, *, #6010, .T.);
#6370 = CARTESIAN_POINT ('', (-2.5, -1.14564392373897, -6.5));
#6380 = CARTESIAN_POINT ('', (-2.5, -1.14564392373897, -5.7));
#6390 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6370, #6380), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6400 = EDGE_CURVE ('', #5080, #3520, #6390, .T.);
#6410 = ORIENTED_EDGE ('', *, *, #6400, .T.);
#6420 = ORIENTED_EDGE ('', *, *, #3570, .F.);
#6430 = CARTESIAN_POINT ('', (0., -2.75, 0.));
#6440 = CARTESIAN_POINT ('', (0., -2.75, -5.7));
#6450 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6430, #6440), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.235537190082645), .UNSPECIFIED.);
#6460 = EDGE_CURVE ('', #880, #3400, #6450, .T.);
#6470 = ORIENTED_EDGE ('', *, *, #6460, .F.);
#6480 = ORIENTED_EDGE ('', *, *, #990, .T.);
#6490 = ORIENTED_EDGE ('', *, *, #6460, .T.);
#6500 = EDGE_LOOP ('', (#6300, #6350, #6360, #6410, #6420, #6470, #6480, #6490));
#6510 = FACE_OUTER_BOUND ('', #6500, .F.);
#6520 = CARTESIAN_POINT ('', (0., -2.75, 0.));
#6530 = CARTESIAN_POINT ('', (0., -2.75, -7.32915640557665));
#6540 = CARTESIAN_POINT ('', (-2.75, -2.75, 0.));
#6550 = CARTESIAN_POINT ('', (-2.75, -2.75, -7.32915640557665));
#6560 = CARTESIAN_POINT ('', (-2.75, -1.68388934882761E-16, 0.));
#6570 = CARTESIAN_POINT ('', (-2.75, -1.68388934882761E-16, -7.32915640557665));
#6580 = CARTESIAN_POINT ('', (-2.75, 2.75, 0.));
#6590 = CARTESIAN_POINT ('', (-2.75, 2.75, -7.32915640557665));
#6600 = CARTESIAN_POINT ('', (-3.36777869765522E-16, 2.75, 0.));
#6610 = CARTESIAN_POINT ('', (-3.36777869765522E-16, 2.75, -7.32915640557665));
#6620 = CARTESIAN_POINT ('', (2.75, 2.75, 0.));
#6630 = CARTESIAN_POINT ('', (2.75, 2.75, -7.32915640557665));
#6640 = CARTESIAN_POINT ('', (2.75, 5.05166804648283E-16, 0.));
#6650 = CARTESIAN_POINT ('', (2.75, 5.05166804648283E-16, -7.32915640557665));
#6660 = CARTESIAN_POINT ('', (2.75, -2.75, 0.));
#6670 = CARTESIAN_POINT ('', (2.75, -2.75, -7.32915640557665));
#6680 = CARTESIAN_POINT ('', (0., -2.75, 0.));
#6690 = CARTESIAN_POINT ('', (0., -2.75, -7.32915640557665));
#6700 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#6520, #6530), (#6540, #6550), (#6560, #6570), (#6580, #6590), (#6600, #6610), (#6620, #6630), (#6640, #6650), (#6660, #6670), (#6680, #6690)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 0.302857702709779), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#6710 = ADVANCED_FACE ('', (#6510), #6700, .F.);
#6720 = ORIENTED_EDGE ('', *, *, #6340, .T.);
#6730 = ORIENTED_EDGE ('', *, *, #3880, .T.);
#6740 = ORIENTED_EDGE ('', *, *, #4690, .T.);
#6750 = ORIENTED_EDGE ('', *, *, #6060, .F.);
#6760 = EDGE_LOOP ('', (#6720, #6730, #6740, #6750));
#6770 = FACE_OUTER_BOUND ('', #6760, .F.);
#6780 = CARTESIAN_POINT ('', (-2.5, -11.5, -5.7));
#6790 = CARTESIAN_POINT ('', (-2.5, -11.5, -6.5));
#6800 = CARTESIAN_POINT ('', (-2.5, 7.2, -5.7));
#6810 = CARTESIAN_POINT ('', (-2.5, 7.2, -6.5));
#6820 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#6780, #6790), (#6800, #6810)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#6830 = ADVANCED_FACE ('', (#6770), #6820, .F.);
#6840 = ORIENTED_EDGE ('', *, *, #6400, .F.);
#6850 = ORIENTED_EDGE ('', *, *, #6140, .F.);
#6860 = ORIENTED_EDGE ('', *, *, #4870, .F.);
#6870 = ORIENTED_EDGE ('', *, *, #4040, .T.);
#6880 = ORIENTED_EDGE ('', *, *, #3620, .T.);
#6890 = EDGE_LOOP ('', (#6840, #6850, #6860, #6870, #6880));
#6900 = FACE_OUTER_BOUND ('', #6890, .F.);
#6910 = CARTESIAN_POINT ('', (-2.5, -11.5, -5.7));
#6920 = CARTESIAN_POINT ('', (-2.5, -11.5, -6.5));
#6930 = CARTESIAN_POINT ('', (-2.5, 7.2, -5.7));
#6940 = CARTESIAN_POINT ('', (-2.5, 7.2, -6.5));
#6950 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#6910, #6920), (#6930, #6940)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#6960 = ADVANCED_FACE ('', (#6900), #6950, .F.);
#6970 = CLOSED_SHELL ('', (#500, #1080, #1400, #1760, #1980, #2210, #2430, #2710, #3020, #3200, #3360, #3970, #4250, #4540, #4790, #5040, #6290, #6710, #6830, #6960));
#6980 = MANIFOLD_SOLID_BREP ('', #6970);
#6990 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#7000 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#7010 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#7020 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #6990, 'DISTANCE_ACCURACY_VALUE', '');
#7030 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#7020))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#6990, #7000, #7010))
   REPRESENTATION_CONTEXT ('', '3D')
);
#7040 = COLOUR_RGB ('', 0.71764705882353, 0.71764705882353, 0.71764705882353);
#7050 = FILL_AREA_STYLE_COLOUR ('', #7040);
#7060 = FILL_AREA_STYLE ('', (#7050));
#7070 = SURFACE_STYLE_FILL_AREA (#7060);
#7080 = SURFACE_SIDE_STYLE ('', (#7070));
#7090 = SURFACE_STYLE_USAGE (.POSITIVE., #7080);
#7100 = PRESENTATION_STYLE_ASSIGNMENT ((#7090));
#7110 = STYLED_ITEM ('', (#7100), #6980);
#7120 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#6980), #7030);
#7130 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#7140 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #7130);
#7150 = MECHANICAL_CONTEXT ('', #7130, 'mechanical');
#7160 = PRODUCT ('product-name', '', '', (#7150));
#7170 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#7180 = PERSON ('', '', $, $, $, $);
#7190 = ORGANIZATION ($, '', '');
#7200 = PERSON_AND_ORGANIZATION (#7180, #7190);
#7210 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#7200, #7170, (#7160));
#7220 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#7160));
#7230 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #7160, .NOT_KNOWN.);
#7240 = APPROVAL_STATUS ('approved');
#7250 = APPROVAL (#7240, '');
#7260 = CALENDAR_DATE (2010, 7, 4);
#7270 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#7280 = LOCAL_TIME (6, 20, 8., #7270);
#7290 = DATE_AND_TIME (#7260, #7280);
#7300 = APPROVAL_DATE_TIME (#7290, #7250);
#7310 = APPROVAL_ROLE ('');
#7320 = PERSON ('', '', $, $, $, $);
#7330 = ORGANIZATION ($, '', '');
#7340 = PERSON_AND_ORGANIZATION (#7320, #7330);
#7350 = APPROVAL_PERSON_ORGANIZATION (#7340, #7250, #7310);
#7360 = CC_DESIGN_APPROVAL (#7250, (#7230));
#7370 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#7380 = PERSON ('', '', $, $, $, $);
#7390 = ORGANIZATION ($, '', '');
#7400 = PERSON_AND_ORGANIZATION (#7380, #7390);
#7410 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#7400, #7370, (#7230));
#7420 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#7430 = PERSON ('', '', $, $, $, $);
#7440 = ORGANIZATION ($, '', '');
#7450 = PERSON_AND_ORGANIZATION (#7430, #7440);
#7460 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#7450, #7420, (#7230));
#7470 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#7480 = SECURITY_CLASSIFICATION ('', '', #7470);
#7490 = APPROVAL_STATUS ('approved');
#7500 = APPROVAL (#7490, '');
#7510 = CALENDAR_DATE (2010, 7, 4);
#7520 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#7530 = LOCAL_TIME (6, 20, 8., #7520);
#7540 = DATE_AND_TIME (#7510, #7530);
#7550 = APPROVAL_DATE_TIME (#7540, #7500);
#7560 = APPROVAL_ROLE ('');
#7570 = PERSON ('', '', $, $, $, $);
#7580 = ORGANIZATION ($, '', '');
#7590 = PERSON_AND_ORGANIZATION (#7570, #7580);
#7600 = APPROVAL_PERSON_ORGANIZATION (#7590, #7500, #7560);
#7610 = CC_DESIGN_APPROVAL (#7500, (#7480));
#7620 = DATE_TIME_ROLE ('classification_date');
#7630 = CALENDAR_DATE (2010, 7, 4);
#7640 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#7650 = LOCAL_TIME (6, 20, 8., #7640);
#7660 = DATE_AND_TIME (#7630, #7650);
#7670 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#7660, #7620, (#7480));
#7680 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#7690 = PERSON ('', '', $, $, $, $);
#7700 = ORGANIZATION ($, '', '');
#7710 = PERSON_AND_ORGANIZATION (#7690, #7700);
#7720 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#7710, #7680, (#7480));
#7730 = CC_DESIGN_SECURITY_CLASSIFICATION (#7480, (#7230));
#7740 = DESIGN_CONTEXT ('', #7130, 'design');
#7750 = PRODUCT_DEFINITION ('', '', #7230, #7740);
#7760 = APPROVAL_STATUS ('approved');
#7770 = APPROVAL (#7760, '');
#7780 = CALENDAR_DATE (2010, 7, 4);
#7790 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#7800 = LOCAL_TIME (6, 20, 8., #7790);
#7810 = DATE_AND_TIME (#7780, #7800);
#7820 = APPROVAL_DATE_TIME (#7810, #7770);
#7830 = APPROVAL_ROLE ('');
#7840 = PERSON ('', '', $, $, $, $);
#7850 = ORGANIZATION ($, '', '');
#7860 = PERSON_AND_ORGANIZATION (#7840, #7850);
#7870 = APPROVAL_PERSON_ORGANIZATION (#7860, #7770, #7830);
#7880 = CC_DESIGN_APPROVAL (#7770, (#7750));
#7890 = DATE_TIME_ROLE ('creation_date');
#7900 = CALENDAR_DATE (2010, 7, 4);
#7910 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#7920 = LOCAL_TIME (6, 20, 8., #7910);
#7930 = DATE_AND_TIME (#7900, #7920);
#7940 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#7930, #7890, (#7750));
#7950 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#7960 = PERSON ('', '', $, $, $, $);
#7970 = ORGANIZATION ($, '', '');
#7980 = PERSON_AND_ORGANIZATION (#7960, #7970);
#7990 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#7980, #7950, (#7750));
#8000 = PRODUCT_DEFINITION_SHAPE ('', '', #7750);
#8010 = SHAPE_DEFINITION_REPRESENTATION (#8000, #7120);
ENDSEC;
END-ISO-10303-21;