ISO-10303-21;
HEADER;
FILE_DESCRIPTION ((), '1');
FILE_NAME ('C:\\TDMTemp\\Tools\\SMLIB\\grooving\\test\\step\\KI2FR.stp', '2010-04-07T06:21:20', ('Unknown'), ('Unknown'), 'HarmonyWare STEP v1.4.3', 'HarmonyWare Translators', '');
FILE_SCHEMA (('CONFIG_CONTROL_DESIGN'));
ENDSEC;

DATA;
#10 = CARTESIAN_POINT ('', (5., -4.25, -3.5));
#20 = VERTEX_POINT ('', #10);
#30 = CARTESIAN_POINT ('', (5., -4.5, -3.5));
#40 = VERTEX_POINT ('', #30);
#50 = CARTESIAN_POINT ('', (5., -4.25, -3.5));
#60 = CARTESIAN_POINT ('', (5., -4.5, -3.5));
#70 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#50, #60), .UNSPECIFIED., .F., .U., (2, 2), (0.975, 1.), .UNSPECIFIED.);
#80 = EDGE_CURVE ('', #20, #40, #70, .T.);
#90 = ORIENTED_EDGE ('', *, *, #80, .F.);
#100 = CARTESIAN_POINT ('', (5., -4.25, -4.15));
#110 = VERTEX_POINT ('', #100);
#120 = CARTESIAN_POINT ('', (5., -4.25, -3.5));
#130 = CARTESIAN_POINT ('', (5., -4.25, -4.15));
#140 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#120, #130), .UNSPECIFIED., .F., .U., (2, 2), (0.35, 1.), .UNSPECIFIED.);
#150 = EDGE_CURVE ('', #20, #110, #140, .T.);
#160 = ORIENTED_EDGE ('', *, *, #150, .T.);
#170 = CARTESIAN_POINT ('', (5., -2.75, -4.15));
#180 = VERTEX_POINT ('', #170);
#190 = CARTESIAN_POINT ('', (5., -2.75, -4.15));
#200 = CARTESIAN_POINT ('', (5., -2.75, -4.9));
#210 = CARTESIAN_POINT ('', (5., -3.5, -4.9));
#220 = CARTESIAN_POINT ('', (5., -4.25, -4.9));
#230 = CARTESIAN_POINT ('', (5., -4.25, -4.15));
#240 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#190, #200, #210, #220, #230), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 0.5, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#250 = EDGE_CURVE ('', #180, #110, #240, .T.);
#260 = ORIENTED_EDGE ('', *, *, #250, .F.);
#270 = CARTESIAN_POINT ('', (5., -2.75, -3.5));
#280 = VERTEX_POINT ('', #270);
#290 = CARTESIAN_POINT ('', (5., -2.75, -3.5));
#300 = CARTESIAN_POINT ('', (5., -2.75, -4.15));
#310 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#290, #300), .UNSPECIFIED., .F., .U., (2, 2), (0.349999999999999, 1.), .UNSPECIFIED.);
#320 = EDGE_CURVE ('', #280, #180, #310, .T.);
#330 = ORIENTED_EDGE ('', *, *, #320, .F.);
#340 = CARTESIAN_POINT ('', (5., 2., -3.5));
#350 = VERTEX_POINT ('', #340);
#360 = CARTESIAN_POINT ('', (5., 2., -3.5));
#370 = CARTESIAN_POINT ('', (5., -2.75, -3.5));
#380 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#360, #370), .UNSPECIFIED., .F., .U., (2, 2), (0.35, 0.825), .UNSPECIFIED.);
#390 = EDGE_CURVE ('', #350, #280, #380, .T.);
#400 = ORIENTED_EDGE ('', *, *, #390, .F.);
#410 = CARTESIAN_POINT ('', (5., 2., -2.));
#420 = VERTEX_POINT ('', #410);
#430 = CARTESIAN_POINT ('', (5., 2., -2.));
#440 = CARTESIAN_POINT ('', (5., 2., -3.5));
#450 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#430, #440), .UNSPECIFIED., .F., .U., (2, 2), (0.571428571428571, 1.), .UNSPECIFIED.);
#460 = EDGE_CURVE ('', #420, #350, #450, .T.);
#470 = ORIENTED_EDGE ('', *, *, #460, .F.);
#480 = CARTESIAN_POINT ('', (5., -4.5, -2.));
#490 = VERTEX_POINT ('', #480);
#500 = CARTESIAN_POINT ('', (5., 2., -2.));
#510 = CARTESIAN_POINT ('', (5., -4.5, -2.));
#520 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#500, #510), .UNSPECIFIED., .F., .U., (2, 2), (0.35, 1.), .UNSPECIFIED.);
#530 = EDGE_CURVE ('', #420, #490, #520, .T.);
#540 = ORIENTED_EDGE ('', *, *, #530, .T.);
#550 = CARTESIAN_POINT ('', (5., -4.5, -3.5));
#560 = CARTESIAN_POINT ('', (5., -4.5, -2.));
#570 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#550, #560), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#580 = EDGE_CURVE ('', #40, #490, #570, .T.);
#590 = ORIENTED_EDGE ('', *, *, #580, .F.);
#600 = EDGE_LOOP ('', (#90, #160, #260, #330, #400, #470, #540, #590));
#610 = FACE_OUTER_BOUND ('', #600, .T.);
#620 = CARTESIAN_POINT ('', (5., 2., -2.));
#630 = CARTESIAN_POINT ('', (5., 2., -4.9));
#640 = CARTESIAN_POINT ('', (5., -4.5, -2.));
#650 = CARTESIAN_POINT ('', (5., -4.5, -4.9));
#660 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#620, #630), (#640, #650)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1.66930457818656, 0.894419014215738), (-0.29869850378687, 0.845116637438771), .UNSPECIFIED.);
#670 = ADVANCED_FACE ('', (#610), #660, .T.);
#680 = CARTESIAN_POINT ('', (-5., -4.25, -3.5));
#690 = VERTEX_POINT ('', #680);
#700 = CARTESIAN_POINT ('', (5., -4.25, -3.5));
#710 = CARTESIAN_POINT ('', (-5., -4.25, -3.5));
#720 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#700, #710), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#730 = EDGE_CURVE ('', #20, #690, #720, .T.);
#740 = ORIENTED_EDGE ('', *, *, #730, .T.);
#750 = CARTESIAN_POINT ('', (-5., -4.25, -4.15));
#760 = VERTEX_POINT ('', #750);
#770 = CARTESIAN_POINT ('', (-5., -4.25, -3.5));
#780 = CARTESIAN_POINT ('', (-5., -4.25, -4.15));
#790 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#770, #780), .UNSPECIFIED., .F., .U., (2, 2), (0.35, 1.), .UNSPECIFIED.);
#800 = EDGE_CURVE ('', #690, #760, #790, .T.);
#810 = ORIENTED_EDGE ('', *, *, #800, .T.);
#820 = CARTESIAN_POINT ('', (-5., -4.25, -4.15));
#830 = CARTESIAN_POINT ('', (5., -4.25, -4.15));
#840 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#820, #830), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#850 = EDGE_CURVE ('', #760, #110, #840, .T.);
#860 = ORIENTED_EDGE ('', *, *, #850, .T.);
#870 = ORIENTED_EDGE ('', *, *, #150, .F.);
#880 = EDGE_LOOP ('', (#740, #810, #860, #870));
#890 = FACE_OUTER_BOUND ('', #880, .T.);
#900 = CARTESIAN_POINT ('', (-5., -4.25, -3.5));
#910 = CARTESIAN_POINT ('', (5., -4.25, -3.5));
#920 = CARTESIAN_POINT ('', (-5., -4.25, -4.15));
#930 = CARTESIAN_POINT ('', (5., -4.25, -4.15));
#940 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#900, #910), (#920, #930)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.35, 1.), (0., 1.), .UNSPECIFIED.);
#950 = ADVANCED_FACE ('', (#890), #940, .T.);
#960 = CARTESIAN_POINT ('', (-5., -2.75, -3.5));
#970 = VERTEX_POINT ('', #960);
#980 = CARTESIAN_POINT ('', (-5., -2.75, -3.5));
#990 = CARTESIAN_POINT ('', (5., -2.75, -3.5));
#1000 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#980, #990), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1010 = EDGE_CURVE ('', #970, #280, #1000, .T.);
#1020 = ORIENTED_EDGE ('', *, *, #1010, .T.);
#1030 = ORIENTED_EDGE ('', *, *, #320, .T.);
#1040 = CARTESIAN_POINT ('', (-5., -2.75, -4.15));
#1050 = VERTEX_POINT ('', #1040);
#1060 = CARTESIAN_POINT ('', (-5., -2.75, -4.15));
#1070 = CARTESIAN_POINT ('', (5., -2.75, -4.15));
#1080 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#1060, #1070), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#1090 = EDGE_CURVE ('', #1050, #180, #1080, .T.);
#1100 = ORIENTED_EDGE ('', *, *, #1090, .F.);
#1110 = CARTESIAN_POINT ('', (-5., -2.75, -3.5));
#1120 = CARTESIAN_POINT ('', (-5., -2.75, -4.15));
#1130 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1110, #1120), .UNSPECIFIED., .F., .U., (2, 2), (0.349999999999999, 1.), .UNSPECIFIED.);
#1140 = EDGE_CURVE ('', #970, #1050, #1130, .T.);
#1150 = ORIENTED_EDGE ('', *, *, #1140, .F.);
#1160 = EDGE_LOOP ('', (#1020, #1030, #1100, #1150));
#1170 = FACE_OUTER_BOUND ('', #1160, .T.);
#1180 = CARTESIAN_POINT ('', (-5., -2.75, -3.5));
#1190 = CARTESIAN_POINT ('', (-5., -2.75, -4.15));
#1200 = CARTESIAN_POINT ('', (5., -2.75, -3.5));
#1210 = CARTESIAN_POINT ('', (5., -2.75, -4.15));
#1220 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1180, #1190), (#1200, #1210)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0.349999999999999, 1.), .UNSPECIFIED.);
#1230 = ADVANCED_FACE ('', (#1170), #1220, .T.);
#1240 = CARTESIAN_POINT ('', (-5., -2.75, -4.15));
#1250 = CARTESIAN_POINT ('', (-5., -2.75, -4.9));
#1260 = CARTESIAN_POINT ('', (-5., -3.5, -4.9));
#1270 = CARTESIAN_POINT ('', (-5., -4.25, -4.9));
#1280 = CARTESIAN_POINT ('', (-5., -4.25, -4.15));
#1290 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1240, #1250, #1260, #1270, #1280), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 0.5, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#1300 = EDGE_CURVE ('', #1050, #760, #1290, .T.);
#1310 = ORIENTED_EDGE ('', *, *, #1300, .F.);
#1320 = ORIENTED_EDGE ('', *, *, #1090, .T.);
#1330 = ORIENTED_EDGE ('', *, *, #250, .T.);
#1340 = ORIENTED_EDGE ('', *, *, #850, .F.);
#1350 = EDGE_LOOP ('', (#1310, #1320, #1330, #1340));
#1360 = FACE_OUTER_BOUND ('', #1350, .T.);
#1370 = CARTESIAN_POINT ('', (-5., -2.75, -4.15));
#1380 = CARTESIAN_POINT ('', (-5., -2.75, -4.9));
#1390 = CARTESIAN_POINT ('', (-5., -3.5, -4.9));
#1400 = CARTESIAN_POINT ('', (-5., -4.25, -4.9));
#1410 = CARTESIAN_POINT ('', (-5., -4.25, -4.15));
#1420 = CARTESIAN_POINT ('', (5., -2.75, -4.15));
#1430 = CARTESIAN_POINT ('', (5., -2.75, -4.9));
#1440 = CARTESIAN_POINT ('', (5., -3.5, -4.9));
#1450 = CARTESIAN_POINT ('', (5., -4.25, -4.9));
#1460 = CARTESIAN_POINT ('', (5., -4.25, -4.15));
#1470 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#1370, #1380, #1390, #1400, #1410), (#1420, #1430, #1440, #1450, #1460)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 2, 3), (0., 1.), (0., 0.5, 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.707106781186548, 1., 0.707106781186548, 1.), (1., 0.707106781186548, 1., 0.707106781186548, 1.)))
   REPRESENTATION_ITEM ('')
);
#1480 = ADVANCED_FACE ('', (#1360), #1470, .T.);
#1490 = CARTESIAN_POINT ('', (6.5, 5.5, -5.5));
#1500 = VERTEX_POINT ('', #1490);
#1510 = CARTESIAN_POINT ('', (-8.88178419700125E-16, 5.5, -5.15934943466023));
#1520 = VERTEX_POINT ('', #1510);
#1530 = CARTESIAN_POINT ('', (6.5, 5.5, -5.5));
#1540 = CARTESIAN_POINT ('', (-8.88178419700125E-16, 5.5, -5.15934943466023));
#1550 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1530, #1540), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1560 = EDGE_CURVE ('', #1500, #1520, #1550, .T.);
#1570 = ORIENTED_EDGE ('', *, *, #1560, .F.);
#1580 = CARTESIAN_POINT ('', (6.5, 3.9, -5.5));
#1590 = VERTEX_POINT ('', #1580);
#1600 = CARTESIAN_POINT ('', (6.5, 5.5, -5.5));
#1610 = CARTESIAN_POINT ('', (6.5, 3.9, -5.5));
#1620 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1600, #1610), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1630 = EDGE_CURVE ('', #1500, #1590, #1620, .T.);
#1640 = ORIENTED_EDGE ('', *, *, #1630, .T.);
#1650 = CARTESIAN_POINT ('', (-8.88178419700125E-16, 3.9, -5.15934943466023));
#1660 = VERTEX_POINT ('', #1650);
#1670 = CARTESIAN_POINT ('', (6.5, 3.9, -5.5));
#1680 = CARTESIAN_POINT ('', (-8.88178419700125E-16, 3.9, -5.15934943466023));
#1690 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1670, #1680), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1700 = EDGE_CURVE ('', #1590, #1660, #1690, .T.);
#1710 = ORIENTED_EDGE ('', *, *, #1700, .T.);
#1720 = CARTESIAN_POINT ('', (-8.88178419700125E-16, 5.5, -5.15934943466023));
#1730 = CARTESIAN_POINT ('', (-8.88178419700125E-16, 3.9, -5.15934943466023));
#1740 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1720, #1730), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1750 = EDGE_CURVE ('', #1520, #1660, #1740, .T.);
#1760 = ORIENTED_EDGE ('', *, *, #1750, .F.);
#1770 = EDGE_LOOP ('', (#1570, #1640, #1710, #1760));
#1780 = FACE_OUTER_BOUND ('', #1770, .T.);
#1790 = CARTESIAN_POINT ('', (6.5, 5.5, -5.5));
#1800 = CARTESIAN_POINT ('', (-8.88178419700125E-16, 5.5, -5.15934943466023));
#1810 = CARTESIAN_POINT ('', (6.5, 3.9, -5.5));
#1820 = CARTESIAN_POINT ('', (-8.88178419700125E-16, 3.9, -5.15934943466023));
#1830 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1790, #1800), (#1810, #1820)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#1840 = ADVANCED_FACE ('', (#1780), #1830, .T.);
#1850 = CARTESIAN_POINT ('', (0., 5.5, -3.5));
#1860 = VERTEX_POINT ('', #1850);
#1870 = CARTESIAN_POINT ('', (3.15908604963741E-16, 5.5, -5.15934943466023));
#1880 = CARTESIAN_POINT ('', (0., 5.5, -3.5));
#1890 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1870, #1880), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1900 = EDGE_CURVE ('', #1520, #1860, #1890, .T.);
#1910 = ORIENTED_EDGE ('', *, *, #1900, .F.);
#1920 = ORIENTED_EDGE ('', *, *, #1750, .T.);
#1930 = CARTESIAN_POINT ('', (0., 3.9, -3.5));
#1940 = VERTEX_POINT ('', #1930);
#1950 = CARTESIAN_POINT ('', (3.15908604963741E-16, 3.9, -5.15934943466023));
#1960 = CARTESIAN_POINT ('', (0., 3.9, -3.5));
#1970 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1950, #1960), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1980 = EDGE_CURVE ('', #1660, #1940, #1970, .T.);
#1990 = ORIENTED_EDGE ('', *, *, #1980, .T.);
#2000 = CARTESIAN_POINT ('', (0., 5.5, -3.5));
#2010 = CARTESIAN_POINT ('', (0., 3.9, -3.5));
#2020 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2000, #2010), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2030 = EDGE_CURVE ('', #1860, #1940, #2020, .T.);
#2040 = ORIENTED_EDGE ('', *, *, #2030, .F.);
#2050 = EDGE_LOOP ('', (#1910, #1920, #1990, #2040));
#2060 = FACE_OUTER_BOUND ('', #2050, .T.);
#2070 = CARTESIAN_POINT ('', (3.15908604963741E-16, 5.5, -5.15934943466023));
#2080 = CARTESIAN_POINT ('', (0., 5.5, -3.5));
#2090 = CARTESIAN_POINT ('', (3.15908604963741E-16, 3.9, -5.15934943466023));
#2100 = CARTESIAN_POINT ('', (0., 3.9, -3.5));
#2110 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2070, #2080), (#2090, #2100)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#2120 = ADVANCED_FACE ('', (#2060), #2110, .T.);
#2130 = CARTESIAN_POINT ('', (3.84529946162075, -4.5, 0.));
#2140 = VERTEX_POINT ('', #2130);
#2150 = CARTESIAN_POINT ('', (5., -4.5, -2.));
#2160 = CARTESIAN_POINT ('', (3.84529946162075, -4.5, 0.));
#2170 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2150, #2160), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2180 = EDGE_CURVE ('', #490, #2140, #2170, .T.);
#2190 = ORIENTED_EDGE ('', *, *, #2180, .T.);
#2200 = CARTESIAN_POINT ('', (-3.84529946162075, -4.5, 2.35448907652527E-16));
#2210 = VERTEX_POINT ('', #2200);
#2220 = CARTESIAN_POINT ('', (3.84529946162075, -4.5, -2.35448907652527E-16));
#2230 = CARTESIAN_POINT ('', (-3.84529946162075, -4.5, 2.35448907652527E-16));
#2240 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2220, #2230), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2250 = EDGE_CURVE ('', #2140, #2210, #2240, .T.);
#2260 = ORIENTED_EDGE ('', *, *, #2250, .T.);
#2270 = CARTESIAN_POINT ('', (-5., -4.5, -2.));
#2280 = VERTEX_POINT ('', #2270);
#2290 = CARTESIAN_POINT ('', (-3.84529946162075, -4.5, 2.35448907652527E-16));
#2300 = CARTESIAN_POINT ('', (-5., -4.5, -2.));
#2310 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2290, #2300), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2320 = EDGE_CURVE ('', #2210, #2280, #2310, .T.);
#2330 = ORIENTED_EDGE ('', *, *, #2320, .T.);
#2340 = CARTESIAN_POINT ('', (-5., -4.5, -3.5));
#2350 = VERTEX_POINT ('', #2340);
#2360 = CARTESIAN_POINT ('', (-5., -4.5, -2.));
#2370 = CARTESIAN_POINT ('', (-5., -4.5, -3.5));
#2380 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2360, #2370), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2390 = EDGE_CURVE ('', #2280, #2350, #2380, .T.);
#2400 = ORIENTED_EDGE ('', *, *, #2390, .T.);
#2410 = CARTESIAN_POINT ('', (-5., -4.5, -3.5));
#2420 = CARTESIAN_POINT ('', (5., -4.5, -3.5));
#2430 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2410, #2420), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2440 = EDGE_CURVE ('', #2350, #40, #2430, .T.);
#2450 = ORIENTED_EDGE ('', *, *, #2440, .T.);
#2460 = ORIENTED_EDGE ('', *, *, #580, .T.);
#2470 = EDGE_LOOP ('', (#2190, #2260, #2330, #2400, #2450, #2460));
#2480 = FACE_OUTER_BOUND ('', #2470, .T.);
#2490 = CARTESIAN_POINT ('', (5., -4.5, -3.5));
#2500 = CARTESIAN_POINT ('', (-5., -4.5, -3.5));
#2510 = CARTESIAN_POINT ('', (5., -4.5, 0.));
#2520 = CARTESIAN_POINT ('', (-5., -4.5, 0.));
#2530 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2490, #2500), (#2510, #2520)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.349840716032679, 0.650159283967321), (0.070973474379083, 0.929026525620917), .UNSPECIFIED.);
#2540 = ADVANCED_FACE ('', (#2480), #2530, .T.);
#2550 = ORIENTED_EDGE ('', *, *, #800, .F.);
#2560 = CARTESIAN_POINT ('', (-5., -4.25, -3.5));
#2570 = CARTESIAN_POINT ('', (-5., -4.5, -3.5));
#2580 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2560, #2570), .UNSPECIFIED., .F., .U., (2, 2), (0.975, 1.), .UNSPECIFIED.);
#2590 = EDGE_CURVE ('', #690, #2350, #2580, .T.);
#2600 = ORIENTED_EDGE ('', *, *, #2590, .T.);
#2610 = ORIENTED_EDGE ('', *, *, #2390, .F.);
#2620 = CARTESIAN_POINT ('', (-5., 5.5, -2.));
#2630 = VERTEX_POINT ('', #2620);
#2640 = CARTESIAN_POINT ('', (-5., 5.5, -2.));
#2650 = CARTESIAN_POINT ('', (-5., -4.5, -2.));
#2660 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2640, #2650), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2670 = EDGE_CURVE ('', #2630, #2280, #2660, .T.);
#2680 = ORIENTED_EDGE ('', *, *, #2670, .F.);
#2690 = CARTESIAN_POINT ('', (-5., 5.5, -3.5));
#2700 = VERTEX_POINT ('', #2690);
#2710 = CARTESIAN_POINT ('', (-5., 5.5, -2.));
#2720 = CARTESIAN_POINT ('', (-5., 5.5, -3.5));
#2730 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2710, #2720), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2740 = EDGE_CURVE ('', #2630, #2700, #2730, .T.);
#2750 = ORIENTED_EDGE ('', *, *, #2740, .T.);
#2760 = CARTESIAN_POINT ('', (-5., 5.5, -3.5));
#2770 = CARTESIAN_POINT ('', (-5., -2.75, -3.5));
#2780 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2760, #2770), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.825), .UNSPECIFIED.);
#2790 = EDGE_CURVE ('', #2700, #970, #2780, .T.);
#2800 = ORIENTED_EDGE ('', *, *, #2790, .T.);
#2810 = ORIENTED_EDGE ('', *, *, #1140, .T.);
#2820 = ORIENTED_EDGE ('', *, *, #1300, .T.);
#2830 = EDGE_LOOP ('', (#2550, #2600, #2610, #2680, #2750, #2800, #2810, #2820));
#2840 = FACE_OUTER_BOUND ('', #2830, .T.);
#2850 = CARTESIAN_POINT ('', (-5., 5.5, -2.));
#2860 = CARTESIAN_POINT ('', (-5., -4.5, -2.));
#2870 = CARTESIAN_POINT ('', (-5., 5.5, -4.9));
#2880 = CARTESIAN_POINT ('', (-5., -4.5, -4.9));
#2890 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2850, #2860), (#2870, #2880)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.93333333333333), (0., 1.), .UNSPECIFIED.);
#2900 = ADVANCED_FACE ('', (#2840), #2890, .T.);
#2910 = CARTESIAN_POINT ('', (-9.86076131526265E-32, -2.15, -4.44089209850063E-16));
#2920 = VERTEX_POINT ('', #2910);
#2930 = CARTESIAN_POINT ('', (-9.86076131526265E-32, -2.15, -4.44089209850063E-16));
#2940 = CARTESIAN_POINT ('', (2.15, -2.15, -4.44089209850063E-16));
#2950 = CARTESIAN_POINT ('', (2.15, -7.92135408784905E-16, -2.71926214689378E-32));
#2960 = CARTESIAN_POINT ('', (2.15, 2.15, 4.44089209850062E-16));
#2970 = CARTESIAN_POINT ('', (1.04045517905429E-15, 2.15, 4.44089209850063E-16));
#2980 = CARTESIAN_POINT ('', (-2.15, 2.15, 4.44089209850063E-16));
#2990 = CARTESIAN_POINT ('', (-2.15, 5.11618832086066E-16, 8.15778644068134E-32));
#3000 = CARTESIAN_POINT ('', (-2.15, -2.15, -4.44089209850062E-16));
#3010 = CARTESIAN_POINT ('', (-9.86076131526265E-32, -2.15, -4.44089209850063E-16));
#3020 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2930, #2940, #2950, #2960, #2970, #2980, #2990, #3000, #3010), .UNSPECIFIED., .T., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 2, 3), (0., 0.25, 0.5, 0.75, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#3030 = EDGE_CURVE ('', #2920, #2920, #3020, .T.);
#3040 = ORIENTED_EDGE ('', *, *, #3030, .T.);
#3050 = CARTESIAN_POINT ('', (4.93038065763132E-32, -2.15, -3.5));
#3060 = VERTEX_POINT ('', #3050);
#3070 = CARTESIAN_POINT ('', (0., -2.15, 0.));
#3080 = CARTESIAN_POINT ('', (0., -2.15, -3.5));
#3090 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#3070, #3080), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#3100 = EDGE_CURVE ('', #2920, #3060, #3090, .T.);
#3110 = ORIENTED_EDGE ('', *, *, #3100, .T.);
#3120 = CARTESIAN_POINT ('', (4.93038065763132E-32, -2.15, -3.5));
#3130 = CARTESIAN_POINT ('', (2.15, -2.15, -3.5));
#3140 = CARTESIAN_POINT ('', (2.15, -6.91994857731754E-17, -3.5));
#3150 = CARTESIAN_POINT ('', (2.15, 2.15, -3.5));
#3160 = CARTESIAN_POINT ('', (1.04045517905429E-15, 2.15, -3.5));
#3170 = CARTESIAN_POINT ('', (-2.15, 2.15, -3.5));
#3180 = CARTESIAN_POINT ('', (-2.15, 1.2345547550978E-15, -3.5));
#3190 = CARTESIAN_POINT ('', (-2.15, -2.15, -3.5));
#3200 = CARTESIAN_POINT ('', (4.93038065763132E-32, -2.15, -3.5));
#3210 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#3120, #3130, #3140, #3150, #3160, #3170, #3180, #3190, #3200), .UNSPECIFIED., .T., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 2, 3), (0., 0.25, 0.5, 0.75, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#3220 = EDGE_CURVE ('', #3060, #3060, #3210, .T.);
#3230 = ORIENTED_EDGE ('', *, *, #3220, .F.);
#3240 = ORIENTED_EDGE ('', *, *, #3100, .F.);
#3250 = EDGE_LOOP ('', (#3040, #3110, #3230, #3240));
#3260 = FACE_OUTER_BOUND ('', #3250, .T.);
#3270 = CARTESIAN_POINT ('', (0., -2.15, 0.));
#3280 = CARTESIAN_POINT ('', (0., -2.15, -3.5));
#3290 = CARTESIAN_POINT ('', (2.15, -2.15, 0.));
#3300 = CARTESIAN_POINT ('', (2.15, -2.15, -3.5));
#3310 = CARTESIAN_POINT ('', (2.15, -1.3164953090834E-16, 0.));
#3320 = CARTESIAN_POINT ('', (2.15, -1.3164953090834E-16, -3.5));
#3330 = CARTESIAN_POINT ('', (2.15, 2.15, 0.));
#3340 = CARTESIAN_POINT ('', (2.15, 2.15, -3.5));
#3350 = CARTESIAN_POINT ('', (2.63299061816681E-16, 2.15, 0.));
#3360 = CARTESIAN_POINT ('', (2.63299061816681E-16, 2.15, -3.5));
#3370 = CARTESIAN_POINT ('', (-2.15, 2.15, 0.));
#3380 = CARTESIAN_POINT ('', (-2.15, 2.15, -3.5));
#3390 = CARTESIAN_POINT ('', (-2.15, 3.94948592725021E-16, 0.));
#3400 = CARTESIAN_POINT ('', (-2.15, 3.94948592725021E-16, -3.5));
#3410 = CARTESIAN_POINT ('', (-2.15, -2.15, 0.));
#3420 = CARTESIAN_POINT ('', (-2.15, -2.15, -3.5));
#3430 = CARTESIAN_POINT ('', (0., -2.15, 0.));
#3440 = CARTESIAN_POINT ('', (0., -2.15, -3.5));
#3450 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#3270, #3280), (#3290, #3300), (#3310, #3320), (#3330, #3340), (#3350, #3360), (#3370, #3380), (#3390, #3400), (#3410, #3420), (#3430, #3440)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#3460 = ADVANCED_FACE ('', (#3260), #3450, .T.);
#3470 = CARTESIAN_POINT ('', (3.84529946162075, 3.15470053837926, 0.));
#3480 = VERTEX_POINT ('', #3470);
#3490 = CARTESIAN_POINT ('', (3.84529946162075, 3.15470053837926, 9.86076131526265E-32));
#3500 = CARTESIAN_POINT ('', (5., 2., -2.));
#3510 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3490, #3500), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3520 = EDGE_CURVE ('', #3480, #420, #3510, .T.);
#3530 = ORIENTED_EDGE ('', *, *, #3520, .F.);
#3540 = CARTESIAN_POINT ('', (3.84529946162075, 3.15470053837926, 0.));
#3550 = CARTESIAN_POINT ('', (3.84529946162075, -4.5, 0.));
#3560 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3540, #3550), .UNSPECIFIED., .F., .U., (2, 2), (0.234529946162074, 1.), .UNSPECIFIED.);
#3570 = EDGE_CURVE ('', #3480, #2140, #3560, .T.);
#3580 = ORIENTED_EDGE ('', *, *, #3570, .T.);
#3590 = ORIENTED_EDGE ('', *, *, #2180, .F.);
#3600 = ORIENTED_EDGE ('', *, *, #530, .F.);
#3610 = EDGE_LOOP ('', (#3530, #3580, #3590, #3600));
#3620 = FACE_OUTER_BOUND ('', #3610, .T.);
#3630 = CARTESIAN_POINT ('', (5., 3.15470053837927, -2.));
#3640 = CARTESIAN_POINT ('', (5., -4.5, -2.));
#3650 = CARTESIAN_POINT ('', (3.84529946162075, 3.15470053837927, 0.));
#3660 = CARTESIAN_POINT ('', (3.84529946162075, -4.5, 0.));
#3670 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3630, #3640), (#3650, #3660)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0.234529946162073, 1.), .UNSPECIFIED.);
#3680 = ADVANCED_FACE ('', (#3620), #3670, .T.);
#3690 = CARTESIAN_POINT ('', (-4.13397459621556, 5.5, -0.5));
#3700 = VERTEX_POINT ('', #3690);
#3710 = CARTESIAN_POINT ('', (-3.84529946162075, 5., 2.35448907652527E-16));
#3720 = VERTEX_POINT ('', #3710);
#3730 = CARTESIAN_POINT ('', (-4.13397459621556, 5.5, -0.5));
#3740 = CARTESIAN_POINT ('', (-3.84529946162075, 5.00000000000001, -9.93649607039515E-15));
#3750 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3730, #3740), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3760 = EDGE_CURVE ('', #3700, #3720, #3750, .T.);
#3770 = ORIENTED_EDGE ('', *, *, #3760, .F.);
#3780 = CARTESIAN_POINT ('', (-4.13397459621556, 5.5, -0.5));
#3790 = CARTESIAN_POINT ('', (-5., 5.5, -2.));
#3800 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3780, #3790), .UNSPECIFIED., .F., .U., (2, 2), (0.25, 1.), .UNSPECIFIED.);
#3810 = EDGE_CURVE ('', #3700, #2630, #3800, .T.);
#3820 = ORIENTED_EDGE ('', *, *, #3810, .T.);
#3830 = ORIENTED_EDGE ('', *, *, #2670, .T.);
#3840 = ORIENTED_EDGE ('', *, *, #2320, .F.);
#3850 = CARTESIAN_POINT ('', (-3.84529946162075, 5., 2.35448907652527E-16));
#3860 = CARTESIAN_POINT ('', (-3.84529946162075, -4.5, 2.35448907652527E-16));
#3870 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3850, #3860), .UNSPECIFIED., .F., .U., (2, 2), (0.05, 1.), .UNSPECIFIED.);
#3880 = EDGE_CURVE ('', #3720, #2210, #3870, .T.);
#3890 = ORIENTED_EDGE ('', *, *, #3880, .F.);
#3900 = EDGE_LOOP ('', (#3770, #3820, #3830, #3840, #3890));
#3910 = FACE_OUTER_BOUND ('', #3900, .T.);
#3920 = CARTESIAN_POINT ('', (-3.84529946162075, 5.5, 2.35448907652527E-16));
#3930 = CARTESIAN_POINT ('', (-3.84529946162075, -4.5, 2.35448907652527E-16));
#3940 = CARTESIAN_POINT ('', (-5., 5.5, -2.));
#3950 = CARTESIAN_POINT ('', (-5., -4.5, -2.));
#3960 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3920, #3930), (#3940, #3950)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#3970 = ADVANCED_FACE ('', (#3910), #3960, .T.);
#3980 = ORIENTED_EDGE ('', *, *, #1010, .F.);
#3990 = ORIENTED_EDGE ('', *, *, #2790, .F.);
#4000 = CARTESIAN_POINT ('', (-5., 5.5, -3.5));
#4010 = CARTESIAN_POINT ('', (0., 5.5, -3.5));
#4020 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4000, #4010), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.5), .UNSPECIFIED.);
#4030 = EDGE_CURVE ('', #2700, #1860, #4020, .T.);
#4040 = ORIENTED_EDGE ('', *, *, #4030, .T.);
#4050 = ORIENTED_EDGE ('', *, *, #2030, .T.);
#4060 = CARTESIAN_POINT ('', (3.10000000000002, 3.9, -3.5));
#4070 = VERTEX_POINT ('', #4060);
#4080 = CARTESIAN_POINT ('', (3.10000000000002, 3.9, -3.5));
#4090 = CARTESIAN_POINT ('', (0., 3.9, -3.5));
#4100 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4080, #4090), .UNSPECIFIED., .F., .U., (2, 2), (0.189999999999998, 0.5), .UNSPECIFIED.);
#4110 = EDGE_CURVE ('', #4070, #1940, #4100, .T.);
#4120 = ORIENTED_EDGE ('', *, *, #4110, .F.);
#4130 = CARTESIAN_POINT ('', (5., 2., -3.5));
#4140 = CARTESIAN_POINT ('', (3.10000000000002, 3.9, -3.5));
#4150 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4130, #4140), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.542857142857143), .UNSPECIFIED.);
#4160 = EDGE_CURVE ('', #350, #4070, #4150, .T.);
#4170 = ORIENTED_EDGE ('', *, *, #4160, .F.);
#4180 = ORIENTED_EDGE ('', *, *, #390, .T.);
#4190 = EDGE_LOOP ('', (#3980, #3990, #4040, #4050, #4120, #4170, #4180));
#4200 = FACE_OUTER_BOUND ('', #4190, .T.);
#4210 = ORIENTED_EDGE ('', *, *, #3220, .T.);
#4220 = EDGE_LOOP ('', (#4210));
#4230 = FACE_BOUND ('', #4220, .T.);
#4240 = CARTESIAN_POINT ('', (-5., 5.5, -3.5));
#4250 = CARTESIAN_POINT ('', (-5., -4.5, -3.5));
#4260 = CARTESIAN_POINT ('', (5., 5.5, -3.5));
#4270 = CARTESIAN_POINT ('', (5., -4.5, -3.5));
#4280 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4240, #4250), (#4260, #4270)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#4290 = ADVANCED_FACE ('', (#4200, #4230), #4280, .T.);
#4300 = ORIENTED_EDGE ('', *, *, #730, .F.);
#4310 = ORIENTED_EDGE ('', *, *, #80, .T.);
#4320 = ORIENTED_EDGE ('', *, *, #2440, .F.);
#4330 = ORIENTED_EDGE ('', *, *, #2590, .F.);
#4340 = EDGE_LOOP ('', (#4300, #4310, #4320, #4330));
#4350 = FACE_OUTER_BOUND ('', #4340, .T.);
#4360 = CARTESIAN_POINT ('', (-5., 5.5, -3.5));
#4370 = CARTESIAN_POINT ('', (-5., -4.5, -3.5));
#4380 = CARTESIAN_POINT ('', (5., 5.5, -3.5));
#4390 = CARTESIAN_POINT ('', (5., -4.5, -3.5));
#4400 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4360, #4370), (#4380, #4390)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#4410 = ADVANCED_FACE ('', (#4350), #4400, .T.);
#4420 = CARTESIAN_POINT ('', (1.9, 5.5, -0.5));
#4430 = VERTEX_POINT ('', #4420);
#4440 = CARTESIAN_POINT ('', (1.4, 5., -8.57224447675662E-17));
#4450 = VERTEX_POINT ('', #4440);
#4460 = CARTESIAN_POINT ('', (1.9, 5.49999999999999, -0.499999999999996));
#4470 = CARTESIAN_POINT ('', (1.4, 5., 1.27675647831893E-15));
#4480 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4460, #4470), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4490 = EDGE_CURVE ('', #4430, #4450, #4480, .T.);
#4500 = ORIENTED_EDGE ('', *, *, #4490, .F.);
#4510 = CARTESIAN_POINT ('', (1.9, 5.5, -0.5));
#4520 = CARTESIAN_POINT ('', (-4.13397459621556, 5.5, -0.5));
#4530 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4510, #4520), .UNSPECIFIED., .F., .U., (2, 2), (0.4, 0.924693443149179), .UNSPECIFIED.);
#4540 = EDGE_CURVE ('', #4430, #3700, #4530, .T.);
#4550 = ORIENTED_EDGE ('', *, *, #4540, .T.);
#4560 = ORIENTED_EDGE ('', *, *, #3760, .T.);
#4570 = CARTESIAN_POINT ('', (-3.84529946162074, 5., 2.35448907652527E-16));
#4580 = CARTESIAN_POINT ('', (1.4, 5., -8.57224447675662E-17));
#4590 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4570, #4580), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.507022486983571), .UNSPECIFIED.);
#4600 = EDGE_CURVE ('', #3720, #4450, #4590, .T.);
#4610 = ORIENTED_EDGE ('', *, *, #4600, .T.);
#4620 = EDGE_LOOP ('', (#4500, #4550, #4560, #4610));
#4630 = FACE_OUTER_BOUND ('', #4620, .T.);
#4640 = CARTESIAN_POINT ('', (-4.13397459621556, 4.99999999999999, 7.105427357601E-15));
#4650 = CARTESIAN_POINT ('', (-4.13397459621556, 5.5, -0.499999999999995));
#4660 = CARTESIAN_POINT ('', (1.9, 4.99999999999999, 7.105427357601E-15));
#4670 = CARTESIAN_POINT ('', (1.9, 5.5, -0.499999999999995));
#4680 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4640, #4650), (#4660, #4670)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.515277699642784, 0.701490072484191), (0.492256850268254, 0.514078624536177), .UNSPECIFIED.);
#4690 = ADVANCED_FACE ('', (#4630), #4680, .T.);
#4700 = CARTESIAN_POINT ('', (3.10000000000002, 3.9, -1.70000000000002));
#4710 = VERTEX_POINT ('', #4700);
#4720 = CARTESIAN_POINT ('', (6.5, 3.9, -5.1));
#4730 = VERTEX_POINT ('', #4720);
#4740 = CARTESIAN_POINT ('', (3.10000000000002, 3.9, -1.70000000000002));
#4750 = CARTESIAN_POINT ('', (6.5, 3.9, -5.1));
#4760 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4740, #4750), .UNSPECIFIED., .F., .U., (2, 2), (0.333333333333337, 1.), .UNSPECIFIED.);
#4770 = EDGE_CURVE ('', #4710, #4730, #4760, .T.);
#4780 = ORIENTED_EDGE ('', *, *, #4770, .F.);
#4790 = CARTESIAN_POINT ('', (3.10000000000002, 3.9, -1.70000000000002));
#4800 = CARTESIAN_POINT ('', (3.10000000000002, 3.9, -3.5));
#4810 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4790, #4800), .UNSPECIFIED., .F., .U., (2, 2), (0.485714285714292, 1.), .UNSPECIFIED.);
#4820 = EDGE_CURVE ('', #4710, #4070, #4810, .T.);
#4830 = ORIENTED_EDGE ('', *, *, #4820, .T.);
#4840 = ORIENTED_EDGE ('', *, *, #4110, .T.);
#4850 = ORIENTED_EDGE ('', *, *, #1980, .F.);
#4860 = ORIENTED_EDGE ('', *, *, #1700, .F.);
#4870 = CARTESIAN_POINT ('', (6.5, 3.9, -5.1));
#4880 = CARTESIAN_POINT ('', (6.5, 3.9, -5.5));
#4890 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4870, #4880), .UNSPECIFIED., .F., .U., (2, 2), (0.927272727272727, 1.), .UNSPECIFIED.);
#4900 = EDGE_CURVE ('', #4730, #1590, #4890, .T.);
#4910 = ORIENTED_EDGE ('', *, *, #4900, .F.);
#4920 = EDGE_LOOP ('', (#4780, #4830, #4840, #4850, #4860, #4910));
#4930 = FACE_OUTER_BOUND ('', #4920, .T.);
#4940 = CARTESIAN_POINT ('', (-8.88178419700125E-16, 3.9, -5.5));
#4950 = CARTESIAN_POINT ('', (-8.88178419700125E-16, 3.9, -1.70000000000002));
#4960 = CARTESIAN_POINT ('', (6.5, 3.9, -5.5));
#4970 = CARTESIAN_POINT ('', (6.5, 3.9, -1.70000000000002));
#4980 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4940, #4950), (#4960, #4970)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.44651378132595, 0.910061009834385), (0.303883864861816, 0.574880706143669), .UNSPECIFIED.);
#4990 = ADVANCED_FACE ('', (#4930), #4980, .T.);
#5000 = CARTESIAN_POINT ('', (6.5, 5.5, -5.1));
#5010 = VERTEX_POINT ('', #5000);
#5020 = CARTESIAN_POINT ('', (6.5, 5.5, -5.1));
#5030 = CARTESIAN_POINT ('', (1.9, 5.5, -0.500000000000003));
#5040 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5020, #5030), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5050 = EDGE_CURVE ('', #5010, #4430, #5040, .T.);
#5060 = ORIENTED_EDGE ('', *, *, #5050, .F.);
#5070 = CARTESIAN_POINT ('', (6.5, 5.5, -5.1));
#5080 = CARTESIAN_POINT ('', (6.5, 5.5, -5.5));
#5090 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5070, #5080), .UNSPECIFIED., .F., .U., (2, 2), (0.927272727272727, 1.), .UNSPECIFIED.);
#5100 = EDGE_CURVE ('', #5010, #1500, #5090, .T.);
#5110 = ORIENTED_EDGE ('', *, *, #5100, .T.);
#5120 = ORIENTED_EDGE ('', *, *, #1560, .T.);
#5130 = ORIENTED_EDGE ('', *, *, #1900, .T.);
#5140 = ORIENTED_EDGE ('', *, *, #4030, .F.);
#5150 = ORIENTED_EDGE ('', *, *, #2740, .F.);
#5160 = ORIENTED_EDGE ('', *, *, #3810, .F.);
#5170 = ORIENTED_EDGE ('', *, *, #4540, .F.);
#5180 = EDGE_LOOP ('', (#5060, #5110, #5120, #5130, #5140, #5150, #5160, #5170));
#5190 = FACE_OUTER_BOUND ('', #5180, .T.);
#5200 = CARTESIAN_POINT ('', (6.5, 5.5, -5.5));
#5210 = CARTESIAN_POINT ('', (6.5, 5.5, -0.5));
#5220 = CARTESIAN_POINT ('', (-5., 5.5, -5.5));
#5230 = CARTESIAN_POINT ('', (-5., 5.5, -0.5));
#5240 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5200, #5210), (#5220, #5230)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.0577344833071922, 0.929026525620917), (0.178230105784312, 0.607256631405229), .UNSPECIFIED.);
#5250 = ADVANCED_FACE ('', (#5190), #5240, .T.);
#5260 = CARTESIAN_POINT ('', (1.4, 3.5, 8.88178419700125E-16));
#5270 = VERTEX_POINT ('', #5260);
#5280 = CARTESIAN_POINT ('', (3.50000000000002, 3.5, -2.14306111918917E-16));
#5290 = VERTEX_POINT ('', #5280);
#5300 = CARTESIAN_POINT ('', (1.4, 3.5, 8.57224447675664E-17));
#5310 = CARTESIAN_POINT ('', (3.50000000000002, 3.5, 5.04249675103329E-17));
#5320 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5300, #5310), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.411764705882356), .UNSPECIFIED.);
#5330 = EDGE_CURVE ('', #5270, #5290, #5320, .T.);
#5340 = ORIENTED_EDGE ('', *, *, #5330, .F.);
#5350 = CARTESIAN_POINT ('', (1.4, 5., 8.88178419700125E-16));
#5360 = CARTESIAN_POINT ('', (1.4, 3.5, 8.88178419700125E-16));
#5370 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5350, #5360), .UNSPECIFIED., .F., .U., (2, 2), (0.25, 1.), .UNSPECIFIED.);
#5380 = EDGE_CURVE ('', #4450, #5270, #5370, .T.);
#5390 = ORIENTED_EDGE ('', *, *, #5380, .F.);
#5400 = ORIENTED_EDGE ('', *, *, #4600, .F.);
#5410 = ORIENTED_EDGE ('', *, *, #3880, .T.);
#5420 = ORIENTED_EDGE ('', *, *, #2250, .F.);
#5430 = ORIENTED_EDGE ('', *, *, #3570, .F.);
#5440 = CARTESIAN_POINT ('', (3.50000000000002, 3.5, -2.14306111918917E-16));
#5450 = CARTESIAN_POINT ('', (3.84529946162075, 3.15470053837926, -2.35448907652527E-16));
#5460 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5440, #5450), .UNSPECIFIED., .F., .U., (2, 2), (0.852769564283226, 1.), .UNSPECIFIED.);
#5470 = EDGE_CURVE ('', #5290, #3480, #5460, .T.);
#5480 = ORIENTED_EDGE ('', *, *, #5470, .F.);
#5490 = EDGE_LOOP ('', (#5340, #5390, #5400, #5410, #5420, #5430, #5480));
#5500 = FACE_OUTER_BOUND ('', #5490, .T.);
#5510 = ORIENTED_EDGE ('', *, *, #3030, .F.);
#5520 = EDGE_LOOP ('', (#5510));
#5530 = FACE_BOUND ('', #5520, .T.);
#5540 = CARTESIAN_POINT ('', (3.84529946162075, 5., -2.35448907652527E-16));
#5550 = CARTESIAN_POINT ('', (3.84529946162075, -4.5, -2.35448907652527E-16));
#5560 = CARTESIAN_POINT ('', (-3.84529946162075, 5., 2.35448907652527E-16));
#5570 = CARTESIAN_POINT ('', (-3.84529946162075, -4.5, 2.35448907652527E-16));
#5580 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5540, #5550), (#5560, #5570)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.22044604925031E-16, 1.), (0.0499999999999998, 1.), .UNSPECIFIED.);
#5590 = ADVANCED_FACE ('', (#5500, #5530), #5580, .T.);
#5600 = CARTESIAN_POINT ('', (6.5, 3.9, -5.1));
#5610 = CARTESIAN_POINT ('', (6.5, 5.5, -5.1));
#5620 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5600, #5610), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5630 = EDGE_CURVE ('', #4730, #5010, #5620, .T.);
#5640 = ORIENTED_EDGE ('', *, *, #5630, .F.);
#5650 = ORIENTED_EDGE ('', *, *, #4900, .T.);
#5660 = ORIENTED_EDGE ('', *, *, #1630, .F.);
#5670 = ORIENTED_EDGE ('', *, *, #5100, .F.);
#5680 = EDGE_LOOP ('', (#5640, #5650, #5660, #5670));
#5690 = FACE_OUTER_BOUND ('', #5680, .T.);
#5700 = CARTESIAN_POINT ('', (6.5, 5.5, -5.1));
#5710 = CARTESIAN_POINT ('', (6.5, 5.5, -5.5));
#5720 = CARTESIAN_POINT ('', (6.5, 3.9, -5.1));
#5730 = CARTESIAN_POINT ('', (6.5, 3.9, -5.5));
#5740 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5700, #5710), (#5720, #5730)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0.927272727272727, 1.), .UNSPECIFIED.);
#5750 = ADVANCED_FACE ('', (#5690), #5740, .T.);
#5760 = CARTESIAN_POINT ('', (3.50000000000002, 3.5, -2.10000000000002));
#5770 = VERTEX_POINT ('', #5760);
#5780 = CARTESIAN_POINT ('', (3.50000000000002, 3.5, 8.88178419700125E-16));
#5790 = CARTESIAN_POINT ('', (3.50000000000002, 3.5, -2.10000000000002));
#5800 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5780, #5790), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.600000000000004), .UNSPECIFIED.);
#5810 = EDGE_CURVE ('', #5290, #5770, #5800, .T.);
#5820 = ORIENTED_EDGE ('', *, *, #5810, .F.);
#5830 = ORIENTED_EDGE ('', *, *, #5470, .T.);
#5840 = ORIENTED_EDGE ('', *, *, #3520, .T.);
#5850 = ORIENTED_EDGE ('', *, *, #460, .T.);
#5860 = ORIENTED_EDGE ('', *, *, #4160, .T.);
#5870 = ORIENTED_EDGE ('', *, *, #4820, .F.);
#5880 = CARTESIAN_POINT ('', (3.50000000000002, 3.5, -2.10000000000002));
#5890 = CARTESIAN_POINT ('', (3.10000000000002, 3.9, -1.70000000000002));
#5900 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5880, #5890), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5910 = EDGE_CURVE ('', #5770, #4710, #5900, .T.);
#5920 = ORIENTED_EDGE ('', *, *, #5910, .F.);
#5930 = EDGE_LOOP ('', (#5820, #5830, #5840, #5850, #5860, #5870, #5920));
#5940 = FACE_OUTER_BOUND ('', #5930, .T.);
#5950 = CARTESIAN_POINT ('', (5., 2., 0.));
#5960 = CARTESIAN_POINT ('', (3.10000000000002, 3.9, 0.));
#5970 = CARTESIAN_POINT ('', (5., 2., -3.5));
#5980 = CARTESIAN_POINT ('', (3.10000000000002, 3.9, -3.5));
#5990 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5950, #5960), (#5970, #5980)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 0.542857142857143), .UNSPECIFIED.);
#6000 = ADVANCED_FACE ('', (#5940), #5990, .T.);
#6010 = ORIENTED_EDGE ('', *, *, #5910, .T.);
#6020 = ORIENTED_EDGE ('', *, *, #4770, .T.);
#6030 = ORIENTED_EDGE ('', *, *, #5630, .T.);
#6040 = ORIENTED_EDGE ('', *, *, #5050, .T.);
#6050 = ORIENTED_EDGE ('', *, *, #4490, .T.);
#6060 = ORIENTED_EDGE ('', *, *, #5380, .T.);
#6070 = CARTESIAN_POINT ('', (3.50000000000002, 3.5, -2.10000000000002));
#6080 = CARTESIAN_POINT ('', (1.4, 3.5, 8.88178419700125E-16));
#6090 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6070, #6080), .UNSPECIFIED., .F., .U., (2, 2), (0.588235294117644, 1.), .UNSPECIFIED.);
#6100 = EDGE_CURVE ('', #5770, #5270, #6090, .T.);
#6110 = ORIENTED_EDGE ('', *, *, #6100, .F.);
#6120 = EDGE_LOOP ('', (#6010, #6020, #6030, #6040, #6050, #6060, #6110));
#6130 = FACE_OUTER_BOUND ('', #6120, .T.);
#6140 = CARTESIAN_POINT ('', (6.5, 5.5, -5.1));
#6150 = CARTESIAN_POINT ('', (6.5, 3.5, -5.1));
#6160 = CARTESIAN_POINT ('', (1.4, 5.5, 8.88178419700125E-16));
#6170 = CARTESIAN_POINT ('', (1.4, 3.5, 8.88178419700125E-16));
#6180 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#6140, #6150), (#6160, #6170)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#6190 = ADVANCED_FACE ('', (#6130), #6180, .T.);
#6200 = ORIENTED_EDGE ('', *, *, #5810, .T.);
#6210 = ORIENTED_EDGE ('', *, *, #6100, .T.);
#6220 = ORIENTED_EDGE ('', *, *, #5330, .T.);
#6230 = EDGE_LOOP ('', (#6200, #6210, #6220));
#6240 = FACE_OUTER_BOUND ('', #6230, .T.);
#6250 = CARTESIAN_POINT ('', (1.4, 3.5, -2.10000000000002));
#6260 = CARTESIAN_POINT ('', (3.50000000000002, 3.5, -2.10000000000002));
#6270 = CARTESIAN_POINT ('', (1.4, 3.5, 8.88178419700125E-16));
#6280 = CARTESIAN_POINT ('', (3.50000000000002, 3.5, 8.88178419700125E-16));
#6290 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#6250, #6260), (#6270, #6280)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.556719795282341, 0.821412173266613), (0.178587826733387, 0.443280204717659), .UNSPECIFIED.);
#6300 = ADVANCED_FACE ('', (#6240), #6290, .T.);
#6310 = CLOSED_SHELL ('', (#670, #950, #1230, #1480, #1840, #2120, #2540, #2900, #3460, #3680, #3970, #4290, #4410, #4690, #4990, #5250, #5590, #5750, #6000, #6190, #6300));
#6320 = MANIFOLD_SOLID_BREP ('', #6310);
#6330 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#6340 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#6350 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#6360 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #6330, 'DISTANCE_ACCURACY_VALUE', '');
#6370 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#6360))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#6330, #6340, #6350))
   REPRESENTATION_CONTEXT ('', '3D')
);
#6380 = COLOUR_RGB ('', 0.71764705882353, 0.71764705882353, 0.71764705882353);
#6390 = FILL_AREA_STYLE_COLOUR ('', #6380);
#6400 = FILL_AREA_STYLE ('', (#6390));
#6410 = SURFACE_STYLE_FILL_AREA (#6400);
#6420 = SURFACE_SIDE_STYLE ('', (#6410));
#6430 = SURFACE_STYLE_USAGE (.POSITIVE., #6420);
#6440 = PRESENTATION_STYLE_ASSIGNMENT ((#6430));
#6450 = STYLED_ITEM ('', (#6440), #6320);
#6460 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#6320), #6370);
#6470 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#6480 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #6470);
#6490 = MECHANICAL_CONTEXT ('', #6470, 'mechanical');
#6500 = PRODUCT ('product-name', '', '', (#6490));
#6510 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#6520 = PERSON ('', '', $, $, $, $);
#6530 = ORGANIZATION ($, '', '');
#6540 = PERSON_AND_ORGANIZATION (#6520, #6530);
#6550 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#6540, #6510, (#6500));
#6560 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#6500));
#6570 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #6500, .NOT_KNOWN.);
#6580 = APPROVAL_STATUS ('approved');
#6590 = APPROVAL (#6580, '');
#6600 = CALENDAR_DATE (2010, 7, 4);
#6610 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#6620 = LOCAL_TIME (6, 21, 20., #6610);
#6630 = DATE_AND_TIME (#6600, #6620);
#6640 = APPROVAL_DATE_TIME (#6630, #6590);
#6650 = APPROVAL_ROLE ('');
#6660 = PERSON ('', '', $, $, $, $);
#6670 = ORGANIZATION ($, '', '');
#6680 = PERSON_AND_ORGANIZATION (#6660, #6670);
#6690 = APPROVAL_PERSON_ORGANIZATION (#6680, #6590, #6650);
#6700 = CC_DESIGN_APPROVAL (#6590, (#6570));
#6710 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#6720 = PERSON ('', '', $, $, $, $);
#6730 = ORGANIZATION ($, '', '');
#6740 = PERSON_AND_ORGANIZATION (#6720, #6730);
#6750 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#6740, #6710, (#6570));
#6760 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#6770 = PERSON ('', '', $, $, $, $);
#6780 = ORGANIZATION ($, '', '');
#6790 = PERSON_AND_ORGANIZATION (#6770, #6780);
#6800 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#6790, #6760, (#6570));
#6810 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#6820 = SECURITY_CLASSIFICATION ('', '', #6810);
#6830 = APPROVAL_STATUS ('approved');
#6840 = APPROVAL (#6830, '');
#6850 = CALENDAR_DATE (2010, 7, 4);
#6860 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#6870 = LOCAL_TIME (6, 21, 20., #6860);
#6880 = DATE_AND_TIME (#6850, #6870);
#6890 = APPROVAL_DATE_TIME (#6880, #6840);
#6900 = APPROVAL_ROLE ('');
#6910 = PERSON ('', '', $, $, $, $);
#6920 = ORGANIZATION ($, '', '');
#6930 = PERSON_AND_ORGANIZATION (#6910, #6920);
#6940 = APPROVAL_PERSON_ORGANIZATION (#6930, #6840, #6900);
#6950 = CC_DESIGN_APPROVAL (#6840, (#6820));
#6960 = DATE_TIME_ROLE ('classification_date');
#6970 = CALENDAR_DATE (2010, 7, 4);
#6980 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#6990 = LOCAL_TIME (6, 21, 20., #6980);
#7000 = DATE_AND_TIME (#6970, #6990);
#7010 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#7000, #6960, (#6820));
#7020 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#7030 = PERSON ('', '', $, $, $, $);
#7040 = ORGANIZATION ($, '', '');
#7050 = PERSON_AND_ORGANIZATION (#7030, #7040);
#7060 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#7050, #7020, (#6820));
#7070 = CC_DESIGN_SECURITY_CLASSIFICATION (#6820, (#6570));
#7080 = DESIGN_CONTEXT ('', #6470, 'design');
#7090 = PRODUCT_DEFINITION ('', '', #6570, #7080);
#7100 = APPROVAL_STATUS ('approved');
#7110 = APPROVAL (#7100, '');
#7120 = CALENDAR_DATE (2010, 7, 4);
#7130 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#7140 = LOCAL_TIME (6, 21, 20., #7130);
#7150 = DATE_AND_TIME (#7120, #7140);
#7160 = APPROVAL_DATE_TIME (#7150, #7110);
#7170 = APPROVAL_ROLE ('');
#7180 = PERSON ('', '', $, $, $, $);
#7190 = ORGANIZATION ($, '', '');
#7200 = PERSON_AND_ORGANIZATION (#7180, #7190);
#7210 = APPROVAL_PERSON_ORGANIZATION (#7200, #7110, #7170);
#7220 = CC_DESIGN_APPROVAL (#7110, (#7090));
#7230 = DATE_TIME_ROLE ('creation_date');
#7240 = CALENDAR_DATE (2010, 7, 4);
#7250 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#7260 = LOCAL_TIME (6, 21, 20., #7250);
#7270 = DATE_AND_TIME (#7240, #7260);
#7280 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#7270, #7230, (#7090));
#7290 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#7300 = PERSON ('', '', $, $, $, $);
#7310 = ORGANIZATION ($, '', '');
#7320 = PERSON_AND_ORGANIZATION (#7300, #7310);
#7330 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#7320, #7290, (#7090));
#7340 = PRODUCT_DEFINITION_SHAPE ('', '', #7090);
#7350 = SHAPE_DEFINITION_REPRESENTATION (#7340, #6460);
ENDSEC;
END-ISO-10303-21;