ISO-10303-21;
HEADER;
FILE_DESCRIPTION ((), '1');
FILE_NAME ('q:\\engin ozkan\\KMH01-B1-20x16x30-IK.stp', '2018-01-17T10:19:29', ('Unknown'), ('TDM'), 'HarmonyWare STEP v2.0.2.9', 'T3D tool generator', '');
FILE_SCHEMA (('CONFIG_CONTROL_DESIGN'));
ENDSEC;

DATA;
#10 = CARTESIAN_POINT ('', (23.5, 21.5478801107225, 19.5660589091224));
#20 = VERTEX_POINT ('', #10);
#30 = CARTESIAN_POINT ('', (26., 21.5478801107225, 19.5660589091224));
#40 = VERTEX_POINT ('', #30);
#50 = CARTESIAN_POINT ('', (23.5, 21.5478801107225, 19.5660589091224));
#60 = CARTESIAN_POINT ('', (26., 21.5478801107225, 19.5660589091224));
#70 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#50, #60), .UNSPECIFIED., .F., .U., (2, 2), (0.083461499025941, 0.403875730544448), .UNSPECIFIED.);
#80 = EDGE_CURVE ('', #20, #40, #70, .T.);
#90 = ORIENTED_EDGE ('', *, *, #80, .T.);
#100 = CARTESIAN_POINT ('', (26., 18.0660589091224, 18.9521198892775));
#110 = VERTEX_POINT ('', #100);
#120 = CARTESIAN_POINT ('', (26., 21.5478801107225, 19.5660589091224));
#130 = CARTESIAN_POINT ('', (26., 20.1139390198449, 17.5181787983999));
#140 = CARTESIAN_POINT ('', (26., 18.0660589091224, 18.9521198892775));
#150 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#120, #130, #140), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (179.999999999999, 269.999999999999), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#160 = EDGE_CURVE ('', #40, #110, #150, .T.);
#170 = ORIENTED_EDGE ('', *, *, #160, .T.);
#180 = CARTESIAN_POINT ('', (30., 18.0660589091224, 18.9521198892775));
#190 = VERTEX_POINT ('', #180);
#200 = CARTESIAN_POINT ('', (26., 18.0660589091224, 18.9521198892775));
#210 = CARTESIAN_POINT ('', (30., 18.0660589091224, 18.9521198892775));
#220 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#200, #210), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#230 = EDGE_CURVE ('', #110, #190, #220, .T.);
#240 = ORIENTED_EDGE ('', *, *, #230, .T.);
#250 = CARTESIAN_POINT ('', (30., 20.9339410908776, 23.0478801107225));
#260 = VERTEX_POINT ('', #250);
#270 = CARTESIAN_POINT ('', (30., 20.9339410908776, 23.0478801107225));
#280 = CARTESIAN_POINT ('', (30., 18.8860609801551, 24.4818212016001));
#290 = CARTESIAN_POINT ('', (30., 17.4521198892775, 22.4339410908776));
#300 = CARTESIAN_POINT ('', (30., 16.0181787983999, 20.3860609801551));
#310 = CARTESIAN_POINT ('', (30., 18.0660589091224, 18.9521198892775));
#320 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#270, #280, #290, #300, #310), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (90.000000000001, 180.000000000001, 270.000000000001), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#330 = EDGE_CURVE ('', #260, #190, #320, .T.);
#340 = ORIENTED_EDGE ('', *, *, #330, .F.);
#350 = CARTESIAN_POINT ('', (26., 20.9339410908776, 23.0478801107225));
#360 = VERTEX_POINT ('', #350);
#370 = CARTESIAN_POINT ('', (26., 20.9339410908776, 23.0478801107225));
#380 = CARTESIAN_POINT ('', (30., 20.9339410908776, 23.0478801107225));
#390 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#370, #380), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#400 = EDGE_CURVE ('', #360, #260, #390, .T.);
#410 = ORIENTED_EDGE ('', *, *, #400, .F.);
#420 = CARTESIAN_POINT ('', (26., 20.9339410908776, 23.0478801107225));
#430 = CARTESIAN_POINT ('', (26., 22.9818212016001, 21.6139390198449));
#440 = CARTESIAN_POINT ('', (26., 21.5478801107225, 19.5660589091224));
#450 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#420, #430, #440), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (89.999999999999, 179.999999999999), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#460 = EDGE_CURVE ('', #360, #40, #450, .T.);
#470 = ORIENTED_EDGE ('', *, *, #460, .T.);
#480 = ORIENTED_EDGE ('', *, *, #80, .F.);
#490 = CARTESIAN_POINT ('', (23.5, 17., 21.));
#500 = VERTEX_POINT ('', #490);
#510 = CARTESIAN_POINT ('', (23.5, 21.5478801107225, 19.5660589091224));
#520 = CARTESIAN_POINT ('', (23.5, 22., 20.2117530278025));
#530 = CARTESIAN_POINT ('', (23.5, 22., 21.));
#540 = CARTESIAN_POINT ('', (23.5, 22., 23.5));
#550 = CARTESIAN_POINT ('', (23.5, 19.5, 23.5));
#560 = CARTESIAN_POINT ('', (23.5, 17., 23.5));
#570 = CARTESIAN_POINT ('', (23.5, 17., 21.));
#580 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#510, #520, #530, #540, #550, #560, #570), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 3), (144.504734311718, 180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.860086715499668, 0.884485304221337, 1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#590 = EDGE_CURVE ('', #20, #500, #580, .T.);
#600 = ORIENTED_EDGE ('', *, *, #590, .T.);
#610 = CARTESIAN_POINT ('', (23.5, 17., 21.));
#620 = CARTESIAN_POINT ('', (23.5, 17., 18.5));
#630 = CARTESIAN_POINT ('', (23.5, 19.5, 18.5));
#640 = CARTESIAN_POINT ('', (23.5, 20.8014176263794, 18.5));
#650 = CARTESIAN_POINT ('', (23.5, 21.5478801107225, 19.5660589091224));
#660 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#610, #620, #630, #640, #650), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 90., 144.504734311718), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.82262147696521, 0.860086715499668))
   REPRESENTATION_ITEM ('')
);
#670 = EDGE_CURVE ('', #500, #20, #660, .T.);
#680 = ORIENTED_EDGE ('', *, *, #670, .T.);
#690 = EDGE_LOOP ('', (#90, #170, #240, #340, #410, #470, #480, #600, #680));
#700 = FACE_OUTER_BOUND ('', #690, .T.);
#710 = CARTESIAN_POINT ('', (30.6512, 21.5478801107225, 19.5660589091224));
#720 = CARTESIAN_POINT ('', (22.8488, 21.5478801107225, 19.5660589091224));
#730 = CARTESIAN_POINT ('', (30.6512, 20.1139390198449, 17.5181787983999));
#740 = CARTESIAN_POINT ('', (22.8488, 20.1139390198449, 17.5181787983999));
#750 = CARTESIAN_POINT ('', (30.6512, 18.0660589091224, 18.9521198892775));
#760 = CARTESIAN_POINT ('', (22.8488, 18.0660589091224, 18.9521198892775));
#770 = CARTESIAN_POINT ('', (30.6512, 16.0181787983999, 20.3860609801551));
#780 = CARTESIAN_POINT ('', (22.8488, 16.0181787983999, 20.3860609801551));
#790 = CARTESIAN_POINT ('', (30.6512, 17.4521198892775, 22.4339410908776));
#800 = CARTESIAN_POINT ('', (22.8488, 17.4521198892775, 22.4339410908776));
#810 = CARTESIAN_POINT ('', (30.6512, 18.8860609801552, 24.4818212016001));
#820 = CARTESIAN_POINT ('', (22.8488, 18.8860609801552, 24.4818212016001));
#830 = CARTESIAN_POINT ('', (30.6512, 20.9339410908776, 23.0478801107225));
#840 = CARTESIAN_POINT ('', (22.8488, 20.9339410908776, 23.0478801107225));
#850 = CARTESIAN_POINT ('', (30.6512, 22.9818212016001, 21.6139390198448));
#860 = CARTESIAN_POINT ('', (22.8488, 22.9818212016001, 21.6139390198448));
#870 = CARTESIAN_POINT ('', (30.6512, 21.5478801107225, 19.5660589091224));
#880 = CARTESIAN_POINT ('', (22.8488, 21.5478801107225, 19.5660589091224));
#890 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#710, #720), (#730, #740), (#750, #760), (#770, #780), (#790, #800), (#810, #820), (#830, #840), (#850, #860), (#870, #880)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#900 = ADVANCED_FACE ('', (#700), #890, .T.);
#910 = CARTESIAN_POINT ('', (26., 25.4018880055096, 19.9193900007763));
#920 = VERTEX_POINT ('', #910);
#930 = CARTESIAN_POINT ('', (30., 25.4018880055096, 19.9193900007763));
#940 = VERTEX_POINT ('', #930);
#950 = CARTESIAN_POINT ('', (26., 25.4018880055096, 19.9193900007763));
#960 = CARTESIAN_POINT ('', (30., 25.4018880055096, 19.9193900007763));
#970 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#950, #960), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#980 = EDGE_CURVE ('', #920, #940, #970, .T.);
#990 = ORIENTED_EDGE ('', *, *, #980, .T.);
#1000 = CARTESIAN_POINT ('', (30., 22.5340058237543, 15.8236297793314));
#1010 = VERTEX_POINT ('', #1000);
#1020 = CARTESIAN_POINT ('', (30., 22.5340058237543, 15.8236297793314));
#1030 = CARTESIAN_POINT ('', (30., 24.9065912244286, 17.2142640686366));
#1040 = CARTESIAN_POINT ('', (30., 25.4018880055096, 19.9193900007763));
#1050 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1020, #1030, #1040), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (335.375681647836, 384.624318352164), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.90905934288631, 1.))
   REPRESENTATION_ITEM ('')
);
#1060 = EDGE_CURVE ('', #1010, #940, #1050, .T.);
#1070 = ORIENTED_EDGE ('', *, *, #1060, .F.);
#1080 = CARTESIAN_POINT ('', (26., 22.5340058237543, 15.8236297793314));
#1090 = VERTEX_POINT ('', #1080);
#1100 = CARTESIAN_POINT ('', (26., 22.5340058237543, 15.8236297793314));
#1110 = CARTESIAN_POINT ('', (30., 22.5340058237543, 15.8236297793314));
#1120 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1100, #1110), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1130 = EDGE_CURVE ('', #1090, #1010, #1120, .T.);
#1140 = ORIENTED_EDGE ('', *, *, #1130, .F.);
#1150 = CARTESIAN_POINT ('', (26., 25.4018880055096, 19.9193900007763));
#1160 = CARTESIAN_POINT ('', (26., 24.9065912244286, 17.2142640686366));
#1170 = CARTESIAN_POINT ('', (26., 22.5340058237543, 15.8236297793314));
#1180 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1150, #1160, #1170), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (155.375681647836, 204.624318352164), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.90905934288631, 1.))
   REPRESENTATION_ITEM ('')
);
#1190 = EDGE_CURVE ('', #920, #1090, #1180, .T.);
#1200 = ORIENTED_EDGE ('', *, *, #1190, .F.);
#1210 = EDGE_LOOP ('', (#990, #1070, #1140, #1200));
#1220 = FACE_OUTER_BOUND ('', #1210, .T.);
#1230 = CARTESIAN_POINT ('', (25.5988, 14.5850877342661, 24.4414586181063));
#1240 = CARTESIAN_POINT ('', (30.4012, 14.5850877342661, 24.4414586181063));
#1250 = CARTESIAN_POINT ('', (25.5988, 11.1436291161598, 19.5265463523724));
#1260 = CARTESIAN_POINT ('', (30.4012, 11.1436291161598, 19.5265463523724));
#1270 = CARTESIAN_POINT ('', (25.5988, 16.0585413818937, 16.0850877342661));
#1280 = CARTESIAN_POINT ('', (30.4012, 16.0585413818937, 16.0850877342661));
#1290 = CARTESIAN_POINT ('', (25.5988, 20.9734536476276, 12.6436291161598));
#1300 = CARTESIAN_POINT ('', (30.4012, 20.9734536476276, 12.6436291161598));
#1310 = CARTESIAN_POINT ('', (25.5988, 24.4149122657339, 17.5585413818937));
#1320 = CARTESIAN_POINT ('', (30.4012, 24.4149122657339, 17.5585413818937));
#1330 = CARTESIAN_POINT ('', (25.5988, 27.8563708838402, 22.4734536476276));
#1340 = CARTESIAN_POINT ('', (30.4012, 27.8563708838402, 22.4734536476276));
#1350 = CARTESIAN_POINT ('', (25.5988, 22.9414586181063, 25.9149122657339));
#1360 = CARTESIAN_POINT ('', (30.4012, 22.9414586181063, 25.9149122657339));
#1370 = CARTESIAN_POINT ('', (25.5988, 18.0265463523724, 29.3563708838402));
#1380 = CARTESIAN_POINT ('', (30.4012, 18.0265463523724, 29.3563708838402));
#1390 = CARTESIAN_POINT ('', (25.5988, 14.5850877342661, 24.4414586181063));
#1400 = CARTESIAN_POINT ('', (30.4012, 14.5850877342661, 24.4414586181063));
#1410 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#1230, #1240), (#1250, #1260), (#1270, #1280), (#1290, #1300), (#1310, #1320), (#1330, #1340), (#1350, #1360), (#1370, #1380), (#1390, #1400)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#1420 = ADVANCED_FACE ('', (#1220), #1410, .T.);
#1430 = CARTESIAN_POINT ('', (30., 20.9339410908776, 23.0478801107225));
#1440 = CARTESIAN_POINT ('', (30., 25.4018880055096, 19.9193900007763));
#1450 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1430, #1440), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1460 = EDGE_CURVE ('', #260, #940, #1450, .T.);
#1470 = ORIENTED_EDGE ('', *, *, #1460, .F.);
#1480 = ORIENTED_EDGE ('', *, *, #330, .T.);
#1490 = CARTESIAN_POINT ('', (30., 18.0660589091224, 18.9521198892775));
#1500 = CARTESIAN_POINT ('', (30., 22.5340058237543, 15.8236297793314));
#1510 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1490, #1500), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1520 = EDGE_CURVE ('', #190, #1010, #1510, .T.);
#1530 = ORIENTED_EDGE ('', *, *, #1520, .T.);
#1540 = ORIENTED_EDGE ('', *, *, #1060, .T.);
#1550 = EDGE_LOOP ('', (#1470, #1480, #1530, #1540));
#1560 = FACE_OUTER_BOUND ('', #1550, .T.);
#1570 = CARTESIAN_POINT ('', (30., 29.4718469925593, 21.6337054462017));
#1580 = CARTESIAN_POINT ('', (30., 22.315084206069, 11.4127889379497));
#1590 = CARTESIAN_POINT ('', (30., 19.1049825978405, 28.8926620429818));
#1600 = CARTESIAN_POINT ('', (30., 11.9482198113502, 18.6717455347298));
#1610 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1570, #1580), (#1590, #1600)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-7.8049803377633, 4.85062428044542), (-6.23871757356331, 6.2387175735633), .UNSPECIFIED.);
#1620 = ADVANCED_FACE ('', (#1560), #1610, .T.);
#1630 = CARTESIAN_POINT ('', (26., 20.9339410908776, 23.0478801107225));
#1640 = CARTESIAN_POINT ('', (26., 25.4018880055096, 19.9193900007763));
#1650 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1630, #1640), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1660 = EDGE_CURVE ('', #360, #920, #1650, .T.);
#1670 = ORIENTED_EDGE ('', *, *, #1660, .T.);
#1680 = ORIENTED_EDGE ('', *, *, #1190, .T.);
#1690 = CARTESIAN_POINT ('', (26., 18.0660589091224, 18.9521198892775));
#1700 = CARTESIAN_POINT ('', (26., 22.5340058237543, 15.8236297793314));
#1710 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1690, #1700), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1720 = EDGE_CURVE ('', #110, #1090, #1710, .T.);
#1730 = ORIENTED_EDGE ('', *, *, #1720, .F.);
#1740 = ORIENTED_EDGE ('', *, *, #160, .F.);
#1750 = ORIENTED_EDGE ('', *, *, #460, .F.);
#1760 = EDGE_LOOP ('', (#1670, #1680, #1730, #1740, #1750));
#1770 = FACE_OUTER_BOUND ('', #1760, .T.);
#1780 = CARTESIAN_POINT ('', (26., 20.4791307776932, 26.4965320379541));
#1790 = CARTESIAN_POINT ('', (26., 14.6698318529424, 18.1999933580022));
#1800 = CARTESIAN_POINT ('', (26., 28.7981150616896, 20.6715165320517));
#1810 = CARTESIAN_POINT ('', (26., 22.9888161369388, 12.3749778520998));
#1820 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1780, #1790), (#1800, #1810)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.35062428044542, 7.80498033776331), (-5.06410179758095, 5.0641017975809), .UNSPECIFIED.);
#1830 = ADVANCED_FACE ('', (#1770), #1820, .T.);
#1840 = ORIENTED_EDGE ('', *, *, #400, .T.);
#1850 = ORIENTED_EDGE ('', *, *, #1460, .T.);
#1860 = ORIENTED_EDGE ('', *, *, #980, .F.);
#1870 = ORIENTED_EDGE ('', *, *, #1660, .F.);
#1880 = EDGE_LOOP ('', (#1840, #1850, #1860, #1870));
#1890 = FACE_OUTER_BOUND ('', #1880, .T.);
#1900 = CARTESIAN_POINT ('', (30.001, 20.9328002344955, 23.0486789469612));
#1910 = CARTESIAN_POINT ('', (25.999, 20.9328002344955, 23.0486789469612));
#1920 = CARTESIAN_POINT ('', (30.001, 25.4030288618917, 19.9185911645376));
#1930 = CARTESIAN_POINT ('', (25.999, 25.4030288618917, 19.9185911645376));
#1940 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1900, #1910), (#1920, #1930)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-5.45574878579857, 0.00139272848064209), (-20.5902215817323, -16.5882215817323), .UNSPECIFIED.);
#1950 = ADVANCED_FACE ('', (#1890), #1940, .T.);
#1960 = ORIENTED_EDGE ('', *, *, #1720, .T.);
#1970 = ORIENTED_EDGE ('', *, *, #1130, .T.);
#1980 = ORIENTED_EDGE ('', *, *, #1520, .F.);
#1990 = ORIENTED_EDGE ('', *, *, #230, .F.);
#2000 = EDGE_LOOP ('', (#1960, #1970, #1980, #1990));
#2010 = FACE_OUTER_BOUND ('', #2000, .T.);
#2020 = CARTESIAN_POINT ('', (25.999, 22.5351466801364, 15.8228309430927));
#2030 = CARTESIAN_POINT ('', (25.999, 18.0649180527403, 18.9529187255162));
#2040 = CARTESIAN_POINT ('', (30.001, 22.5351466801364, 15.8228309430927));
#2050 = CARTESIAN_POINT ('', (30.001, 18.0649180527403, 18.9529187255162));
#2060 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2020, #2030), (#2040, #2050)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (16.5882215817323, 20.5902215817323), (-5.45574878579843, 0.00139272848064032), .UNSPECIFIED.);
#2070 = ADVANCED_FACE ('', (#2010), #2060, .T.);
#2080 = CARTESIAN_POINT ('', (16., 23., 6.00000000000001));
#2090 = VERTEX_POINT ('', #2080);
#2100 = CARTESIAN_POINT ('', (30., 23., 6.00000000000001));
#2110 = VERTEX_POINT ('', #2100);
#2120 = CARTESIAN_POINT ('', (16., 23., 6.00000000000001));
#2130 = CARTESIAN_POINT ('', (30., 23., 6.00000000000001));
#2140 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2120, #2130), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2150 = EDGE_CURVE ('', #2090, #2110, #2140, .T.);
#2160 = ORIENTED_EDGE ('', *, *, #2150, .T.);
#2170 = CARTESIAN_POINT ('', (30., -25., 5.99999999999998));
#2180 = VERTEX_POINT ('', #2170);
#2190 = CARTESIAN_POINT ('', (30., -25., 5.99999999999998));
#2200 = CARTESIAN_POINT ('', (30., 23., 6.00000000000001));
#2210 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2190, #2200), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2220 = EDGE_CURVE ('', #2180, #2110, #2210, .T.);
#2230 = ORIENTED_EDGE ('', *, *, #2220, .F.);
#2240 = CARTESIAN_POINT ('', (16., -25., 5.99999999999998));
#2250 = VERTEX_POINT ('', #2240);
#2260 = CARTESIAN_POINT ('', (30., -25., 5.99999999999998));
#2270 = CARTESIAN_POINT ('', (16., -25., 5.99999999999998));
#2280 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2260, #2270), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2290 = EDGE_CURVE ('', #2180, #2250, #2280, .T.);
#2300 = ORIENTED_EDGE ('', *, *, #2290, .T.);
#2310 = CARTESIAN_POINT ('', (16., 23., 6.00000000000001));
#2320 = CARTESIAN_POINT ('', (16., -25., 5.99999999999998));
#2330 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2310, #2320), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2340 = EDGE_CURVE ('', #2090, #2250, #2330, .T.);
#2350 = ORIENTED_EDGE ('', *, *, #2340, .F.);
#2360 = EDGE_LOOP ('', (#2160, #2230, #2300, #2350));
#2370 = FACE_OUTER_BOUND ('', #2360, .T.);
#2380 = CARTESIAN_POINT ('', (16.55, -24.2, 5.99999999999998));
#2390 = VERTEX_POINT ('', #2380);
#2400 = CARTESIAN_POINT ('', (29.45, -24.2, 5.99999999999998));
#2410 = VERTEX_POINT ('', #2400);
#2420 = CARTESIAN_POINT ('', (16.55, -24.2, 5.99999999999998));
#2430 = CARTESIAN_POINT ('', (29.45, -24.2, 5.99999999999998));
#2440 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2420, #2430), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2450 = EDGE_CURVE ('', #2390, #2410, #2440, .T.);
#2460 = ORIENTED_EDGE ('', *, *, #2450, .T.);
#2470 = CARTESIAN_POINT ('', (29.45, 22.2, 6.));
#2480 = VERTEX_POINT ('', #2470);
#2490 = CARTESIAN_POINT ('', (29.45, -24.2, 5.99999999999998));
#2500 = CARTESIAN_POINT ('', (29.45, 22.2, 6.));
#2510 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2490, #2500), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2520 = EDGE_CURVE ('', #2410, #2480, #2510, .T.);
#2530 = ORIENTED_EDGE ('', *, *, #2520, .T.);
#2540 = CARTESIAN_POINT ('', (16.55, 22.2, 6.));
#2550 = VERTEX_POINT ('', #2540);
#2560 = CARTESIAN_POINT ('', (29.45, 22.2, 6.));
#2570 = CARTESIAN_POINT ('', (16.55, 22.2, 6.));
#2580 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2560, #2570), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2590 = EDGE_CURVE ('', #2480, #2550, #2580, .T.);
#2600 = ORIENTED_EDGE ('', *, *, #2590, .T.);
#2610 = CARTESIAN_POINT ('', (16.55, 22.2, 6.));
#2620 = CARTESIAN_POINT ('', (16.55, -24.2, 5.99999999999998));
#2630 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2610, #2620), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2640 = EDGE_CURVE ('', #2550, #2390, #2630, .T.);
#2650 = ORIENTED_EDGE ('', *, *, #2640, .T.);
#2660 = EDGE_LOOP ('', (#2460, #2530, #2600, #2650));
#2670 = FACE_BOUND ('', #2660, .T.);
#2680 = CARTESIAN_POINT ('', (30.001, 23.001, 6.));
#2690 = CARTESIAN_POINT ('', (15.999, 23.001, 6.));
#2700 = CARTESIAN_POINT ('', (30.001, -25.001, 5.99999999999999));
#2710 = CARTESIAN_POINT ('', (15.999, -25.001, 5.99999999999999));
#2720 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2680, #2690), (#2700, #2710)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (6.999, 55.001), (59.2358128784795, 73.2378128784795), .UNSPECIFIED.);
#2730 = ADVANCED_FACE ('', (#2370, #2670), #2720, .T.);
#2740 = CARTESIAN_POINT ('', (23., 6.97500000000002, -27.5));
#2750 = VERTEX_POINT ('', #2740);
#2760 = CARTESIAN_POINT ('', (23., 7.40000000000003, -27.2446342369133));
#2770 = VERTEX_POINT ('', #2760);
#2780 = CARTESIAN_POINT ('', (23., 6.97500000000002, -27.5));
#2790 = CARTESIAN_POINT ('', (23., 7.40000000000001, -27.2446342369133));
#2800 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2780, #2790), .UNSPECIFIED., .F., .U., (2, 2), (0.00388552070021997, 0.996114479299794), .UNSPECIFIED.);
#2810 = EDGE_CURVE ('', #2750, #2770, #2800, .T.);
#2820 = ORIENTED_EDGE ('', *, *, #2810, .T.);
#2830 = CARTESIAN_POINT ('', (23., 11.6, -27.2446342369133));
#2840 = VERTEX_POINT ('', #2830);
#2850 = CARTESIAN_POINT ('', (23., 11.6, -27.2446342369133));
#2860 = CARTESIAN_POINT ('', (25.1, 11.6, -27.2446342369133));
#2870 = CARTESIAN_POINT ('', (25.1, 9.50000000000002, -27.2446342369133));
#2880 = CARTESIAN_POINT ('', (25.1, 7.40000000000003, -27.2446342369133));
#2890 = CARTESIAN_POINT ('', (23., 7.40000000000003, -27.2446342369133));
#2900 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2850, #2860, #2870, #2880, #2890), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 90., 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#2910 = EDGE_CURVE ('', #2840, #2770, #2900, .T.);
#2920 = ORIENTED_EDGE ('', *, *, #2910, .F.);
#2930 = CARTESIAN_POINT ('', (23., 7.40000000000003, -27.2446342369133));
#2940 = CARTESIAN_POINT ('', (20.9, 7.40000000000003, -27.2446342369133));
#2950 = CARTESIAN_POINT ('', (20.9, 9.50000000000002, -27.2446342369133));
#2960 = CARTESIAN_POINT ('', (20.9, 11.6, -27.2446342369133));
#2970 = CARTESIAN_POINT ('', (23., 11.6, -27.2446342369133));
#2980 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2930, #2940, #2950, #2960, #2970), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#2990 = EDGE_CURVE ('', #2770, #2840, #2980, .T.);
#3000 = ORIENTED_EDGE ('', *, *, #2990, .F.);
#3010 = ORIENTED_EDGE ('', *, *, #2810, .F.);
#3020 = CARTESIAN_POINT ('', (23., 12.025, -27.5));
#3030 = VERTEX_POINT ('', #3020);
#3040 = CARTESIAN_POINT ('', (23., 6.97500000000002, -27.5));
#3050 = CARTESIAN_POINT ('', (20.475, 6.97500000000003, -27.5));
#3060 = CARTESIAN_POINT ('', (20.475, 9.50000000000002, -27.5));
#3070 = CARTESIAN_POINT ('', (20.475, 12.025, -27.5));
#3080 = CARTESIAN_POINT ('', (23., 12.025, -27.5));
#3090 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#3040, #3050, #3060, #3070, #3080), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#3100 = EDGE_CURVE ('', #2750, #3030, #3090, .T.);
#3110 = ORIENTED_EDGE ('', *, *, #3100, .T.);
#3120 = CARTESIAN_POINT ('', (23., 12.025, -27.5));
#3130 = CARTESIAN_POINT ('', (25.525, 12.025, -27.5));
#3140 = CARTESIAN_POINT ('', (25.525, 9.50000000000002, -27.5));
#3150 = CARTESIAN_POINT ('', (25.525, 6.97500000000003, -27.5));
#3160 = CARTESIAN_POINT ('', (23., 6.97500000000002, -27.5));
#3170 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#3120, #3130, #3140, #3150, #3160), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 90., 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#3180 = EDGE_CURVE ('', #3030, #2750, #3170, .T.);
#3190 = ORIENTED_EDGE ('', *, *, #3180, .T.);
#3200 = EDGE_LOOP ('', (#2820, #2920, #3000, #3010, #3110, #3190));
#3210 = FACE_OUTER_BOUND ('', #3200, .T.);
#3220 = CARTESIAN_POINT ('', (23., 7.40166427948236, -27.2436342369133));
#3230 = CARTESIAN_POINT ('', (23., 6.97333572051767, -27.501));
#3240 = CARTESIAN_POINT ('', (25.0983357205177, 7.40166427948236, -27.2436342369133));
#3250 = CARTESIAN_POINT ('', (25.5266642794824, 6.97333572051767, -27.501));
#3260 = CARTESIAN_POINT ('', (25.0983357205177, 9.50000000000002, -27.2436342369133));
#3270 = CARTESIAN_POINT ('', (25.5266642794824, 9.50000000000002, -27.501));
#3280 = CARTESIAN_POINT ('', (25.0983357205177, 11.5983357205177, -27.2436342369133));
#3290 = CARTESIAN_POINT ('', (25.5266642794824, 12.0266642794824, -27.501));
#3300 = CARTESIAN_POINT ('', (23., 11.5983357205177, -27.2436342369133));
#3310 = CARTESIAN_POINT ('', (23., 12.0266642794824, -27.501));
#3320 = CARTESIAN_POINT ('', (20.9016642794823, 11.5983357205177, -27.2436342369133));
#3330 = CARTESIAN_POINT ('', (20.4733357205177, 12.0266642794824, -27.501));
#3340 = CARTESIAN_POINT ('', (20.9016642794823, 9.50000000000003, -27.2436342369133));
#3350 = CARTESIAN_POINT ('', (20.4733357205177, 9.50000000000003, -27.501));
#3360 = CARTESIAN_POINT ('', (20.9016642794823, 7.40166427948236, -27.2436342369133));
#3370 = CARTESIAN_POINT ('', (20.4733357205176, 6.97333572051768, -27.501));
#3380 = CARTESIAN_POINT ('', (23., 7.40166427948236, -27.2436342369133));
#3390 = CARTESIAN_POINT ('', (23., 6.97333572051767, -27.501));
#3400 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#3220, #3230), (#3240, #3250), (#3260, #3270), (#3280, #3290), (#3300, #3310), (#3320, #3330), (#3340, #3350), (#3360, #3370), (#3380, #3390)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#3410 = ADVANCED_FACE ('', (#3210), #3400, .T.);
#3420 = CARTESIAN_POINT ('', (23., 6.90000000000003, -27.5475792385528));
#3430 = VERTEX_POINT ('', #3420);
#3440 = CARTESIAN_POINT ('', (23., 6.90000000000003, -27.5));
#3450 = VERTEX_POINT ('', #3440);
#3460 = CARTESIAN_POINT ('', (23., 6.90000000000003, -27.5475792385528));
#3470 = CARTESIAN_POINT ('', (23., 6.90000000000003, -27.5));
#3480 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3460, #3470), .UNSPECIFIED., .F., .U., (2, 2), (0.888591018869407, 0.916088731552125), .UNSPECIFIED.);
#3490 = EDGE_CURVE ('', #3430, #3450, #3480, .T.);
#3500 = ORIENTED_EDGE ('', *, *, #3490, .T.);
#3510 = CARTESIAN_POINT ('', (23., 12.1, -27.5));
#3520 = VERTEX_POINT ('', #3510);
#3530 = CARTESIAN_POINT ('', (23., 12.1, -27.5));
#3540 = CARTESIAN_POINT ('', (25.6, 12.1, -27.5));
#3550 = CARTESIAN_POINT ('', (25.6, 9.50000000000002, -27.5));
#3560 = CARTESIAN_POINT ('', (25.6, 6.90000000000003, -27.5));
#3570 = CARTESIAN_POINT ('', (23., 6.90000000000003, -27.5));
#3580 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#3530, #3540, #3550, #3560, #3570), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 90., 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#3590 = EDGE_CURVE ('', #3520, #3450, #3580, .T.);
#3600 = ORIENTED_EDGE ('', *, *, #3590, .F.);
#3610 = CARTESIAN_POINT ('', (23., 6.90000000000003, -27.5));
#3620 = CARTESIAN_POINT ('', (20.4, 6.90000000000003, -27.5));
#3630 = CARTESIAN_POINT ('', (20.4, 9.50000000000002, -27.5));
#3640 = CARTESIAN_POINT ('', (20.4, 12.1, -27.5));
#3650 = CARTESIAN_POINT ('', (23., 12.1, -27.5));
#3660 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#3610, #3620, #3630, #3640, #3650), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#3670 = EDGE_CURVE ('', #3450, #3520, #3660, .T.);
#3680 = ORIENTED_EDGE ('', *, *, #3670, .F.);
#3690 = ORIENTED_EDGE ('', *, *, #3490, .F.);
#3700 = CARTESIAN_POINT ('', (23., 12.1, -28.9409150391947));
#3710 = VERTEX_POINT ('', #3700);
#3720 = CARTESIAN_POINT ('', (23., 12.1, -28.9409150391947));
#3730 = CARTESIAN_POINT ('', (17.8, 12.1, -28.9409150391947));
#3740 = CARTESIAN_POINT ('', (17.8, 6.90000000000003, -27.5475792385528));
#3750 = CARTESIAN_POINT ('', (23., 6.90000000000003, -27.5475792385528));
#3760 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#3720, #3730, #3740, #3750), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.333333333333333, 0.333333333333333, 1.))
   REPRESENTATION_ITEM ('')
);
#3770 = EDGE_CURVE ('', #3710, #3430, #3760, .T.);
#3780 = ORIENTED_EDGE ('', *, *, #3770, .F.);
#3790 = CARTESIAN_POINT ('', (23., 6.90000000000003, -27.5475792385528));
#3800 = CARTESIAN_POINT ('', (28.2, 6.90000000000002, -27.5475792385528));
#3810 = CARTESIAN_POINT ('', (28.2, 12.1, -28.9409150391947));
#3820 = CARTESIAN_POINT ('', (23., 12.1, -28.9409150391947));
#3830 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#3790, #3800, #3810, #3820), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.333333333333333, 0.333333333333333, 1.))
   REPRESENTATION_ITEM ('')
);
#3840 = EDGE_CURVE ('', #3430, #3710, #3830, .T.);
#3850 = ORIENTED_EDGE ('', *, *, #3840, .F.);
#3860 = EDGE_LOOP ('', (#3500, #3600, #3680, #3690, #3780, #3850));
#3870 = FACE_OUTER_BOUND ('', #3860, .T.);
#3880 = CARTESIAN_POINT ('', (23., 6.90000000000003, -27.3548084960805));
#3890 = CARTESIAN_POINT ('', (23., 6.90000000000003, -29.0851065431142));
#3900 = CARTESIAN_POINT ('', (25.6, 6.90000000000003, -27.3548084960805));
#3910 = CARTESIAN_POINT ('', (25.6, 6.90000000000002, -29.0851065431142));
#3920 = CARTESIAN_POINT ('', (25.6, 9.50000000000002, -27.3548084960805));
#3930 = CARTESIAN_POINT ('', (25.6, 9.50000000000002, -29.0851065431142));
#3940 = CARTESIAN_POINT ('', (25.6, 12.1, -27.3548084960805));
#3950 = CARTESIAN_POINT ('', (25.6, 12.1, -29.0851065431142));
#3960 = CARTESIAN_POINT ('', (23., 12.1, -27.3548084960805));
#3970 = CARTESIAN_POINT ('', (23., 12.1, -29.0851065431142));
#3980 = CARTESIAN_POINT ('', (20.4, 12.1, -27.3548084960805));
#3990 = CARTESIAN_POINT ('', (20.4, 12.1, -29.0851065431142));
#4000 = CARTESIAN_POINT ('', (20.4, 9.50000000000003, -27.3548084960805));
#4010 = CARTESIAN_POINT ('', (20.4, 9.50000000000003, -29.0851065431142));
#4020 = CARTESIAN_POINT ('', (20.4, 6.90000000000003, -27.3548084960805));
#4030 = CARTESIAN_POINT ('', (20.4, 6.90000000000003, -29.0851065431142));
#4040 = CARTESIAN_POINT ('', (23., 6.90000000000003, -27.3548084960805));
#4050 = CARTESIAN_POINT ('', (23., 6.90000000000003, -29.0851065431142));
#4060 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#3880, #3890), (#3900, #3910), (#3920, #3930), (#3940, #3950), (#3960, #3970), (#3980, #3990), (#4000, #4010), (#4020, #4030), (#4040, #4050)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#4070 = ADVANCED_FACE ('', (#3870), #4060, .T.);
#4080 = CARTESIAN_POINT ('', (0.300000000000001, -9.3809683021095, -23.1732050807569));
#4090 = VERTEX_POINT ('', #4080);
#4100 = CARTESIAN_POINT ('', (0.3, -25., -4.59242549680257E-15));
#4110 = VERTEX_POINT ('', #4100);
#4120 = CARTESIAN_POINT ('', (0.3, -9.38096830210948, -23.1732050807569));
#4130 = CARTESIAN_POINT ('', (0.3, -25., -16.8503144509568));
#4140 = CARTESIAN_POINT ('', (0.3, -25., -1.07156594925393E-14));
#4150 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#4120, #4130, #4140), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (292.039068702687, 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.829228174896506, 1.))
   REPRESENTATION_ITEM ('')
);
#4160 = EDGE_CURVE ('', #4090, #4110, #4150, .T.);
#4170 = ORIENTED_EDGE ('', *, *, #4160, .T.);
#4180 = CARTESIAN_POINT ('', (0.3, -9.29258004503344, 23.2087904921098));
#4190 = VERTEX_POINT ('', #4180);
#4200 = CARTESIAN_POINT ('', (0.3, -25., -4.59242549680257E-15));
#4210 = CARTESIAN_POINT ('', (0.3, -25., 16.9196882107089));
#4220 = CARTESIAN_POINT ('', (0.3, -9.29258004503344, 23.2087904921098));
#4230 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#4200, #4210, #4220), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 68.1793034434911), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.828161578981221, 1.))
   REPRESENTATION_ITEM ('')
);
#4240 = EDGE_CURVE ('', #4110, #4190, #4230, .T.);
#4250 = ORIENTED_EDGE ('', *, *, #4240, .T.);
#4260 = CARTESIAN_POINT ('', (0., -9.29258004503342, 23.2087904921098));
#4270 = VERTEX_POINT ('', #4260);
#4280 = CARTESIAN_POINT ('', (0.3, -9.29258004503344, 23.2087904921098));
#4290 = CARTESIAN_POINT ('', (0., -9.29258004503342, 23.2087904921098));
#4300 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4280, #4290), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4310 = EDGE_CURVE ('', #4190, #4270, #4300, .T.);
#4320 = ORIENTED_EDGE ('', *, *, #4310, .T.);
#4330 = CARTESIAN_POINT ('', (0., -9.7979589711327, -23.));
#4340 = VERTEX_POINT ('', #4330);
#4350 = CARTESIAN_POINT ('', (0., -9.79795897113269, -23.));
#4360 = CARTESIAN_POINT ('', (0., -25.181370280884, -16.4466942239564));
#4370 = CARTESIAN_POINT ('', (0., -24.9985049486537, 0.273405069695434));
#4380 = CARTESIAN_POINT ('', (0., -24.8156396164235, 16.9935043633473));
#4390 = CARTESIAN_POINT ('', (0., -9.29258004503344, 23.2087904921098));
#4400 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#4350, #4360, #4370, #4380, #4390), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (293.073918065631, 360.626610754561, 428.179303443491), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.831214056292876, 1., 0.831214056292876, 1.))
   REPRESENTATION_ITEM ('')
);
#4410 = EDGE_CURVE ('', #4340, #4270, #4400, .T.);
#4420 = ORIENTED_EDGE ('', *, *, #4410, .F.);
#4430 = CARTESIAN_POINT ('', (0., -9.7979589711327, -23.));
#4440 = CARTESIAN_POINT ('', (0.102172823855618, -9.65948536931358, -23.0589895073569));
#4450 = CARTESIAN_POINT ('', (0.202175542401186, -9.52048470094539, -23.1167261038289));
#4460 = CARTESIAN_POINT ('', (0.300000000000001, -9.3809683021095, -23.1732050807569));
#4470 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#4430, #4440, #4450, #4460), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.999972815283336, 0.999972815283336, 1.))
   REPRESENTATION_ITEM ('')
);
#4480 = EDGE_CURVE ('', #4340, #4090, #4470, .T.);
#4490 = ORIENTED_EDGE ('', *, *, #4480, .T.);
#4500 = EDGE_LOOP ('', (#4170, #4250, #4320, #4420, #4490));
#4510 = FACE_OUTER_BOUND ('', #4500, .T.);
#4520 = CARTESIAN_POINT ('', (0.3312, 25., 4.59242549680257E-15));
#4530 = CARTESIAN_POINT ('', (-0.0312000000000001, 25., 4.59242549680257E-15));
#4540 = CARTESIAN_POINT ('', (0.3312, 25., -25.));
#4550 = CARTESIAN_POINT ('', (-0.0312000000000001, 25., -25.));
#4560 = CARTESIAN_POINT ('', (0.3312, 1.01200368843873E-14, -25.));
#4570 = CARTESIAN_POINT ('', (-0.0312, 1.01192321947391E-14, -25.));
#4580 = CARTESIAN_POINT ('', (0.3312, -25., -25.));
#4590 = CARTESIAN_POINT ('', (-0.0312, -25., -25.));
#4600 = CARTESIAN_POINT ('', (0.3312, -25., -1.65358266916722E-14));
#4610 = CARTESIAN_POINT ('', (-0.0312, -25., -1.65358266916722E-14));
#4620 = CARTESIAN_POINT ('', (0.3312, -25., 25.));
#4630 = CARTESIAN_POINT ('', (-0.0312, -25., 25.));
#4640 = CARTESIAN_POINT ('', (0.3312, -1.40698323019558E-14, 25.));
#4650 = CARTESIAN_POINT ('', (-0.0312, -1.40706369916041E-14, 25.));
#4660 = CARTESIAN_POINT ('', (0.3312, 25., 25.));
#4670 = CARTESIAN_POINT ('', (-0.0312000000000001, 25., 25.));
#4680 = CARTESIAN_POINT ('', (0.3312, 25., 4.59242549680257E-15));
#4690 = CARTESIAN_POINT ('', (-0.0312000000000001, 25., 4.59242549680257E-15));
#4700 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#4520, #4530), (#4540, #4550), (#4560, #4570), (#4580, #4590), (#4600, #4610), (#4620, #4630), (#4640, #4650), (#4660, #4670), (#4680, #4690)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#4710 = ADVANCED_FACE ('', (#4510), #4700, .T.);
#4720 = CARTESIAN_POINT ('', (30., 17.2473318782053, 19.4226648000346));
#4730 = VERTEX_POINT ('', #4720);
#4740 = CARTESIAN_POINT ('', (30., 19.5000479965544, 23.7499999995812));
#4750 = VERTEX_POINT ('', #4740);
#4760 = CARTESIAN_POINT ('', (30., 17.2473318782053, 19.4226648000346));
#4770 = CARTESIAN_POINT ('', (30., 16.2901719656612, 20.7896308212678));
#4780 = CARTESIAN_POINT ('', (30., 17.060731290024, 22.2698299730798));
#4790 = CARTESIAN_POINT ('', (30., 17.8312906143867, 23.7500291248919));
#4800 = CARTESIAN_POINT ('', (30., 19.5000479965544, 23.7499999995812));
#4810 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#4760, #4770, #4780, #4790, #4800), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (144.999999999999, 207.500499999999, 270.000999999999), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.854909607089452, 1., 0.854909607089452, 1.))
   REPRESENTATION_ITEM ('')
);
#4820 = EDGE_CURVE ('', #4730, #4750, #4810, .T.);
#4830 = ORIENTED_EDGE ('', *, *, #4820, .F.);
#4840 = CARTESIAN_POINT ('', (23.5, 17.2473318782053, 19.4226648000346));
#4850 = VERTEX_POINT ('', #4840);
#4860 = CARTESIAN_POINT ('', (30., 17.2473318782053, 19.4226648000346));
#4870 = CARTESIAN_POINT ('', (23.5, 17.2473318782053, 19.4226648000346));
#4880 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4860, #4870), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4890 = EDGE_CURVE ('', #4730, #4850, #4880, .T.);
#4900 = ORIENTED_EDGE ('', *, *, #4890, .T.);
#4910 = CARTESIAN_POINT ('', (23.5, 19.5000479965544, 23.7499999995812));
#4920 = VERTEX_POINT ('', #4910);
#4930 = CARTESIAN_POINT ('', (23.5, 17.2473318782053, 19.4226648000346));
#4940 = CARTESIAN_POINT ('', (23.5, 16.2901719656612, 20.7896308212678));
#4950 = CARTESIAN_POINT ('', (23.5, 17.060731290024, 22.2698299730798));
#4960 = CARTESIAN_POINT ('', (23.5, 17.8312906143867, 23.7500291248919));
#4970 = CARTESIAN_POINT ('', (23.5, 19.5000479965544, 23.7499999995812));
#4980 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#4930, #4940, #4950, #4960, #4970), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (144.999999999999, 207.500499999999, 270.000999999999), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.854909607089452, 1., 0.854909607089452, 1.))
   REPRESENTATION_ITEM ('')
);
#4990 = EDGE_CURVE ('', #4850, #4920, #4980, .T.);
#5000 = ORIENTED_EDGE ('', *, *, #4990, .T.);
#5010 = CARTESIAN_POINT ('', (30., 19.5000479965544, 23.7499999995812));
#5020 = CARTESIAN_POINT ('', (23.5, 19.5000479965544, 23.7499999995812));
#5030 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5010, #5020), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5040 = EDGE_CURVE ('', #4750, #4920, #5030, .T.);
#5050 = ORIENTED_EDGE ('', *, *, #5040, .F.);
#5060 = EDGE_LOOP ('', (#4830, #4900, #5000, #5050));
#5070 = FACE_OUTER_BOUND ('', #5060, .T.);
#5080 = CARTESIAN_POINT ('', (30.6512, 22.25, 21.));
#5090 = CARTESIAN_POINT ('', (22.8488, 22.25, 21.));
#5100 = CARTESIAN_POINT ('', (30.6512, 22.25, 23.75));
#5110 = CARTESIAN_POINT ('', (22.8488, 22.25, 23.75));
#5120 = CARTESIAN_POINT ('', (30.6512, 19.5, 23.75));
#5130 = CARTESIAN_POINT ('', (22.8488, 19.5, 23.75));
#5140 = CARTESIAN_POINT ('', (30.6512, 16.75, 23.75));
#5150 = CARTESIAN_POINT ('', (22.8488, 16.75, 23.75));
#5160 = CARTESIAN_POINT ('', (30.6512, 16.75, 21.));
#5170 = CARTESIAN_POINT ('', (22.8488, 16.75, 21.));
#5180 = CARTESIAN_POINT ('', (30.6512, 16.75, 18.25));
#5190 = CARTESIAN_POINT ('', (22.8488, 16.75, 18.25));
#5200 = CARTESIAN_POINT ('', (30.6512, 19.5, 18.25));
#5210 = CARTESIAN_POINT ('', (22.8488, 19.5, 18.25));
#5220 = CARTESIAN_POINT ('', (30.6512, 22.25, 18.25));
#5230 = CARTESIAN_POINT ('', (22.8488, 22.25, 18.25));
#5240 = CARTESIAN_POINT ('', (30.6512, 22.25, 21.));
#5250 = CARTESIAN_POINT ('', (22.8488, 22.25, 21.));
#5260 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#5080, #5090), (#5100, #5110), (#5120, #5130), (#5140, #5150), (#5160, #5170), (#5180, #5190), (#5200, #5210), (#5220, #5230), (#5240, #5250)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#5270 = ADVANCED_FACE ('', (#5070), #5260, .T.);
#5280 = CARTESIAN_POINT ('', (-37.9996207671431, -10., -3.99344751077374E-15));
#5290 = VERTEX_POINT ('', #5280);
#5300 = CARTESIAN_POINT ('', (-40., -9.464, -9.97610858038028E-15));
#5310 = VERTEX_POINT ('', #5300);
#5320 = CARTESIAN_POINT ('', (-37.9996207671431, -10., -4.20729480353334E-15));
#5330 = CARTESIAN_POINT ('', (-40., -9.46400000000001, -1.73969294162783E-15));
#5340 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5320, #5330), .UNSPECIFIED., .F., .U., (2, 2), (0.000499405898530402, 0.999500594101463), .UNSPECIFIED.);
#5350 = EDGE_CURVE ('', #5290, #5310, #5340, .T.);
#5360 = ORIENTED_EDGE ('', *, *, #5350, .T.);
#5370 = CARTESIAN_POINT ('', (-40., 5.05641137566951, 8.));
#5380 = VERTEX_POINT ('', #5370);
#5390 = CARTESIAN_POINT ('', (-40., 5.05641137566951, 8.));
#5400 = CARTESIAN_POINT ('', (-40., 11.0687150801985, 4.19991489430499));
#5410 = CARTESIAN_POINT ('', (-40., 9.09063518132809, -2.63204255284751));
#5420 = CARTESIAN_POINT ('', (-40., 7.11255528245773, -9.464));
#5430 = CARTESIAN_POINT ('', (-40., -3.76969764118977E-15, -9.464));
#5440 = CARTESIAN_POINT ('', (-40., -7.11255528245774, -9.464));
#5450 = CARTESIAN_POINT ('', (-40., -9.09063518132809, -2.63204255284749));
#5460 = CARTESIAN_POINT ('', (-40., -9.464, -1.34250285584789));
#5470 = CARTESIAN_POINT ('', (-40., -9.464, -9.55084056151965E-15));
#5480 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5390, #5400, #5410, #5420, #5430, #5440, #5450, #5460, #5470), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 2, 3), (302.294991788279, 376.14749589414, 450., 523.852504105861, 540.501523392588), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.799409471160244, 1., 0.799409471160244, 1., 0.799409471160244, 1., 0.954779656779126, 0.929947907704163))
   REPRESENTATION_ITEM ('')
);
#5490 = EDGE_CURVE ('', #5380, #5310, #5480, .T.);
#5500 = ORIENTED_EDGE ('', *, *, #5490, .F.);
#5510 = CARTESIAN_POINT ('', (-37.9996207671431, 6.00000000000001, 8.));
#5520 = VERTEX_POINT ('', #5510);
#5530 = CARTESIAN_POINT ('', (-37.9996207671431, 6.00000000000001, 8.));
#5540 = CARTESIAN_POINT ('', (-38.6727958714194, 5.69937212407403, 8.));
#5550 = CARTESIAN_POINT ('', (-39.3409810690626, 5.38691990728015, 8.));
#5560 = CARTESIAN_POINT ('', (-40., 5.05641137566951, 8.));
#5570 = B_SPLINE_CURVE_WITH_KNOTS ('', 3, (#5530, #5540, #5550, #5560), .UNSPECIFIED., .F., .U., (4, 4), (0., 1.), .UNSPECIFIED.);
#5580 = EDGE_CURVE ('', #5520, #5380, #5570, .T.);
#5590 = ORIENTED_EDGE ('', *, *, #5580, .F.);
#5600 = CARTESIAN_POINT ('', (-37.9996207671431, -10., -4.55256321433351E-15));
#5610 = CARTESIAN_POINT ('', (-37.9996207671431, -10., -1.6227766016838));
#5620 = CARTESIAN_POINT ('', (-37.9996207671431, -9.48683298050514, -3.16227766016838));
#5630 = CARTESIAN_POINT ('', (-37.9996207671431, -7.20759220056127, -10.));
#5640 = CARTESIAN_POINT ('', (-37.9996207671431, 1.97215226305253E-31, -10.));
#5650 = CARTESIAN_POINT ('', (-37.9996207671431, 7.20759220056127, -10.));
#5660 = CARTESIAN_POINT ('', (-37.9996207671431, 9.48683298050514, -3.16227766016838));
#5670 = CARTESIAN_POINT ('', (-37.9996207671431, 11.766073760449, 3.67544467966324));
#5680 = CARTESIAN_POINT ('', (-37.9996207671431, 6., 8.));
#5690 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5600, #5610, #5620, #5630, #5640, #5650, #5660, #5670, #5680), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 2, 3), (179.561835621107, 198.434948822922, 270., 341.565051177078, 413.130102354156), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.926697180237449, 0.950220847350557, 1., 0.811242185175561, 1., 0.811242185175561, 1., 0.811242185175561, 1.))
   REPRESENTATION_ITEM ('')
);
#5700 = EDGE_CURVE ('', #5290, #5520, #5690, .T.);
#5710 = ORIENTED_EDGE ('', *, *, #5700, .F.);
#5720 = EDGE_LOOP ('', (#5360, #5500, #5590, #5710));
#5730 = FACE_OUTER_BOUND ('', #5720, .T.);
#5740 = CARTESIAN_POINT ('', (-40.001, -9.46373205080758, -1.73845937460146E-15));
#5750 = CARTESIAN_POINT ('', (-37.9986207671431, -10.0002679491924, -4.2085283705597E-15));
#5760 = CARTESIAN_POINT ('', (-40.001, -9.46373205080758, -9.46373205080758));
#5770 = CARTESIAN_POINT ('', (-37.9986207671431, -10.0002679491924, -10.0002679491924));
#5780 = CARTESIAN_POINT ('', (-40.001, 3.82350817550135E-15, -9.46373205080758));
#5790 = CARTESIAN_POINT ('', (-37.9986207671431, 4.04027777368005E-15, -10.0002679491924));
#5800 = CARTESIAN_POINT ('', (-40.001, 9.46373205080758, -9.46373205080758));
#5810 = CARTESIAN_POINT ('', (-37.9986207671431, 10.0002679491924, -10.0002679491924));
#5820 = CARTESIAN_POINT ('', (-40.001, 9.46373205080758, 5.90855697640124E-15));
#5830 = CARTESIAN_POINT ('', (-37.9986207671431, 10.0002679491924, 3.87202717680039E-15));
#5840 = CARTESIAN_POINT ('', (-40.001, 9.46373205080758, 9.46373205080759));
#5850 = CARTESIAN_POINT ('', (-37.9986207671431, 10.0002679491924, 10.0002679491924));
#5860 = CARTESIAN_POINT ('', (-40.001, -2.66453525910038E-15, 9.46373205080759));
#5870 = CARTESIAN_POINT ('', (-37.9986207671431, -2.81559816022061E-15, 10.0002679491924));
#5880 = CARTESIAN_POINT ('', (-40.001, -9.46373205080758, 9.46373205080759));
#5890 = CARTESIAN_POINT ('', (-37.9986207671431, -10.0002679491924, 10.0002679491924));
#5900 = CARTESIAN_POINT ('', (-40.001, -9.46373205080758, -1.73845937460146E-15));
#5910 = CARTESIAN_POINT ('', (-37.9986207671431, -10.0002679491924, -4.2085283705597E-15));
#5920 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#5740, #5750), (#5760, #5770), (#5780, #5790), (#5800, #5810), (#5820, #5830), (#5840, #5850), (#5860, #5870), (#5880, #5890), (#5900, #5910)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#5930 = ADVANCED_FACE ('', (#5730), #5920, .T.);
#5940 = CARTESIAN_POINT ('', (0., -10., -6.12323399573677E-16));
#5950 = VERTEX_POINT ('', #5940);
#5960 = CARTESIAN_POINT ('', (4.44089209850063E-16, -10., -1.83697019872103E-15));
#5970 = CARTESIAN_POINT ('', (-37.9996207671431, -10., -1.83697019872103E-15));
#5980 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5960, #5970), .UNSPECIFIED., .F., .U., (2, 2), (0.0833552622225888, 0.916644737777411), .UNSPECIFIED.);
#5990 = EDGE_CURVE ('', #5950, #5290, #5980, .T.);
#6000 = ORIENTED_EDGE ('', *, *, #5990, .T.);
#6010 = ORIENTED_EDGE ('', *, *, #5700, .T.);
#6020 = CARTESIAN_POINT ('', (-33.4013203435596, 6.00000000000001, 8.));
#6030 = VERTEX_POINT ('', #6020);
#6040 = CARTESIAN_POINT ('', (-33.4013203435596, 6.00000000000001, 8.));
#6050 = CARTESIAN_POINT ('', (-37.9996207671431, 6.00000000000001, 8.));
#6060 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6040, #6050), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6070 = EDGE_CURVE ('', #6030, #5520, #6060, .T.);
#6080 = ORIENTED_EDGE ('', *, *, #6070, .F.);
#6090 = CARTESIAN_POINT ('', (-31.7, 7.76702224700976, 6.29867965644035));
#6100 = VERTEX_POINT ('', #6090);
#6110 = CARTESIAN_POINT ('', (-31.7, 7.76702224700976, 6.29867965644035));
#6120 = CARTESIAN_POINT ('', (-32.3382775048174, 7.24941003902303, 6.93695716125773));
#6130 = CARTESIAN_POINT ('', (-32.9082529997164, 6.65742312512429, 7.50693265615678));
#6140 = CARTESIAN_POINT ('', (-33.4013203435596, 6.00000000000001, 8.));
#6150 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#6110, #6120, #6130, #6140), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.994966952547642, 0.994966952547642, 1.))
   REPRESENTATION_ITEM ('')
);
#6160 = EDGE_CURVE ('', #6100, #6030, #6150, .T.);
#6170 = ORIENTED_EDGE ('', *, *, #6160, .F.);
#6180 = CARTESIAN_POINT ('', (-29.9986796564404, 6.00000000000001, 8.));
#6190 = VERTEX_POINT ('', #6180);
#6200 = CARTESIAN_POINT ('', (-29.9986796564404, 6.00000000000001, 8.));
#6210 = CARTESIAN_POINT ('', (-30.4917470002836, 6.65742312512429, 7.50693265615678));
#6220 = CARTESIAN_POINT ('', (-31.0617224951826, 7.24941003902303, 6.93695716125773));
#6230 = CARTESIAN_POINT ('', (-31.7, 7.76702224700976, 6.29867965644035));
#6240 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#6200, #6210, #6220, #6230), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.994966952547642, 0.994966952547642, 1.))
   REPRESENTATION_ITEM ('')
);
#6250 = EDGE_CURVE ('', #6190, #6100, #6240, .T.);
#6260 = ORIENTED_EDGE ('', *, *, #6250, .F.);
#6270 = CARTESIAN_POINT ('', (-29.4013203435596, 6.00000000000001, 8.));
#6280 = VERTEX_POINT ('', #6270);
#6290 = CARTESIAN_POINT ('', (-29.4013203435596, 6.00000000000001, 8.));
#6300 = CARTESIAN_POINT ('', (-29.9986796564404, 6.00000000000001, 8.));
#6310 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6290, #6300), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6320 = EDGE_CURVE ('', #6280, #6190, #6310, .T.);
#6330 = ORIENTED_EDGE ('', *, *, #6320, .F.);
#6340 = CARTESIAN_POINT ('', (-27.7, 7.76702224700976, 6.29867965644035));
#6350 = VERTEX_POINT ('', #6340);
#6360 = CARTESIAN_POINT ('', (-27.7, 7.76702224700976, 6.29867965644035));
#6370 = CARTESIAN_POINT ('', (-28.3382775048174, 7.24941003902303, 6.93695716125773));
#6380 = CARTESIAN_POINT ('', (-28.9082529997164, 6.65742312512429, 7.50693265615678));
#6390 = CARTESIAN_POINT ('', (-29.4013203435596, 6.00000000000001, 8.));
#6400 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#6360, #6370, #6380, #6390), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.994966952547642, 0.994966952547642, 1.))
   REPRESENTATION_ITEM ('')
);
#6410 = EDGE_CURVE ('', #6350, #6280, #6400, .T.);
#6420 = ORIENTED_EDGE ('', *, *, #6410, .F.);
#6430 = CARTESIAN_POINT ('', (-25.9986796564404, 6.00000000000001, 8.));
#6440 = VERTEX_POINT ('', #6430);
#6450 = CARTESIAN_POINT ('', (-25.9986796564404, 6.00000000000001, 8.));
#6460 = CARTESIAN_POINT ('', (-26.4917470002836, 6.65742312512429, 7.50693265615678));
#6470 = CARTESIAN_POINT ('', (-27.0617224951826, 7.24941003902304, 6.93695716125772));
#6480 = CARTESIAN_POINT ('', (-27.7, 7.76702224700976, 6.29867965644035));
#6490 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#6450, #6460, #6470, #6480), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.994966952547642, 0.994966952547642, 1.))
   REPRESENTATION_ITEM ('')
);
#6500 = EDGE_CURVE ('', #6440, #6350, #6490, .T.);
#6510 = ORIENTED_EDGE ('', *, *, #6500, .F.);
#6520 = CARTESIAN_POINT ('', (-25.4013203435596, 6.00000000000001, 8.));
#6530 = VERTEX_POINT ('', #6520);
#6540 = CARTESIAN_POINT ('', (-25.4013203435596, 6.00000000000001, 8.));
#6550 = CARTESIAN_POINT ('', (-25.9986796564404, 6.00000000000001, 8.));
#6560 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6540, #6550), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6570 = EDGE_CURVE ('', #6530, #6440, #6560, .T.);
#6580 = ORIENTED_EDGE ('', *, *, #6570, .F.);
#6590 = CARTESIAN_POINT ('', (-23.7, 7.76702224700976, 6.29867965644035));
#6600 = VERTEX_POINT ('', #6590);
#6610 = CARTESIAN_POINT ('', (-23.7, 7.76702224700976, 6.29867965644035));
#6620 = CARTESIAN_POINT ('', (-24.3382775048174, 7.24941003902303, 6.93695716125773));
#6630 = CARTESIAN_POINT ('', (-24.9082529997164, 6.65742312512429, 7.50693265615678));
#6640 = CARTESIAN_POINT ('', (-25.4013203435596, 6.00000000000001, 8.));
#6650 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#6610, #6620, #6630, #6640), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.994966952547642, 0.994966952547642, 1.))
   REPRESENTATION_ITEM ('')
);
#6660 = EDGE_CURVE ('', #6600, #6530, #6650, .T.);
#6670 = ORIENTED_EDGE ('', *, *, #6660, .F.);
#6680 = CARTESIAN_POINT ('', (-21.9986796564404, 6.00000000000001, 8.));
#6690 = VERTEX_POINT ('', #6680);
#6700 = CARTESIAN_POINT ('', (-21.9986796564404, 6.00000000000001, 8.));
#6710 = CARTESIAN_POINT ('', (-22.4917470002836, 6.65742312512429, 7.50693265615678));
#6720 = CARTESIAN_POINT ('', (-23.0617224951826, 7.24941003902303, 6.93695716125773));
#6730 = CARTESIAN_POINT ('', (-23.7, 7.76702224700976, 6.29867965644035));
#6740 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#6700, #6710, #6720, #6730), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.994966952547642, 0.994966952547642, 1.))
   REPRESENTATION_ITEM ('')
);
#6750 = EDGE_CURVE ('', #6690, #6600, #6740, .T.);
#6760 = ORIENTED_EDGE ('', *, *, #6750, .F.);
#6770 = CARTESIAN_POINT ('', (-21.4013203435596, 6.00000000000001, 8.));
#6780 = VERTEX_POINT ('', #6770);
#6790 = CARTESIAN_POINT ('', (-21.4013203435596, 6.00000000000001, 8.));
#6800 = CARTESIAN_POINT ('', (-21.9986796564404, 6.00000000000001, 8.));
#6810 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6790, #6800), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6820 = EDGE_CURVE ('', #6780, #6690, #6810, .T.);
#6830 = ORIENTED_EDGE ('', *, *, #6820, .F.);
#6840 = CARTESIAN_POINT ('', (-19.7, 7.76702224700976, 6.29867965644035));
#6850 = VERTEX_POINT ('', #6840);
#6860 = CARTESIAN_POINT ('', (-19.7, 7.76702224700976, 6.29867965644035));
#6870 = CARTESIAN_POINT ('', (-20.3382775048174, 7.24941003902303, 6.93695716125773));
#6880 = CARTESIAN_POINT ('', (-20.9082529997164, 6.65742312512429, 7.50693265615678));
#6890 = CARTESIAN_POINT ('', (-21.4013203435596, 6.00000000000001, 8.));
#6900 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#6860, #6870, #6880, #6890), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.994966952547642, 0.994966952547642, 1.))
   REPRESENTATION_ITEM ('')
);
#6910 = EDGE_CURVE ('', #6850, #6780, #6900, .T.);
#6920 = ORIENTED_EDGE ('', *, *, #6910, .F.);
#6930 = CARTESIAN_POINT ('', (-17.9986796564404, 6.00000000000001, 8.));
#6940 = VERTEX_POINT ('', #6930);
#6950 = CARTESIAN_POINT ('', (-17.9986796564404, 6.00000000000001, 8.));
#6960 = CARTESIAN_POINT ('', (-18.4917470002836, 6.65742312512429, 7.50693265615678));
#6970 = CARTESIAN_POINT ('', (-19.0617224951826, 7.24941003902303, 6.93695716125773));
#6980 = CARTESIAN_POINT ('', (-19.7, 7.76702224700976, 6.29867965644035));
#6990 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#6950, #6960, #6970, #6980), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.994966952547642, 0.994966952547642, 1.))
   REPRESENTATION_ITEM ('')
);
#7000 = EDGE_CURVE ('', #6940, #6850, #6990, .T.);
#7010 = ORIENTED_EDGE ('', *, *, #7000, .F.);
#7020 = CARTESIAN_POINT ('', (-17.4013203435596, 6.00000000000001, 8.));
#7030 = VERTEX_POINT ('', #7020);
#7040 = CARTESIAN_POINT ('', (-17.4013203435596, 6.00000000000001, 8.));
#7050 = CARTESIAN_POINT ('', (-17.9986796564404, 6.00000000000001, 8.));
#7060 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7040, #7050), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#7070 = EDGE_CURVE ('', #7030, #6940, #7060, .T.);
#7080 = ORIENTED_EDGE ('', *, *, #7070, .F.);
#7090 = CARTESIAN_POINT ('', (-15.7, 7.76702224700976, 6.29867965644035));
#7100 = VERTEX_POINT ('', #7090);
#7110 = CARTESIAN_POINT ('', (-15.7, 7.76702224700976, 6.29867965644035));
#7120 = CARTESIAN_POINT ('', (-16.3382775048174, 7.24941003902303, 6.93695716125773));
#7130 = CARTESIAN_POINT ('', (-16.9082529997164, 6.65742312512429, 7.50693265615678));
#7140 = CARTESIAN_POINT ('', (-17.4013203435596, 6.00000000000001, 8.));
#7150 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#7110, #7120, #7130, #7140), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.994966952547642, 0.994966952547642, 1.))
   REPRESENTATION_ITEM ('')
);
#7160 = EDGE_CURVE ('', #7100, #7030, #7150, .T.);
#7170 = ORIENTED_EDGE ('', *, *, #7160, .F.);
#7180 = CARTESIAN_POINT ('', (-13.9986796564404, 6.00000000000001, 8.));
#7190 = VERTEX_POINT ('', #7180);
#7200 = CARTESIAN_POINT ('', (-13.9986796564404, 6.00000000000001, 8.));
#7210 = CARTESIAN_POINT ('', (-14.4917470002836, 6.65742312512429, 7.50693265615678));
#7220 = CARTESIAN_POINT ('', (-15.0617224951826, 7.24941003902304, 6.93695716125772));
#7230 = CARTESIAN_POINT ('', (-15.7, 7.76702224700976, 6.29867965644035));
#7240 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#7200, #7210, #7220, #7230), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.994966952547642, 0.994966952547642, 1.))
   REPRESENTATION_ITEM ('')
);
#7250 = EDGE_CURVE ('', #7190, #7100, #7240, .T.);
#7260 = ORIENTED_EDGE ('', *, *, #7250, .F.);
#7270 = CARTESIAN_POINT ('', (-13.4013203435596, 6.00000000000001, 8.));
#7280 = VERTEX_POINT ('', #7270);
#7290 = CARTESIAN_POINT ('', (-13.4013203435596, 6.00000000000001, 8.));
#7300 = CARTESIAN_POINT ('', (-13.9986796564404, 6.00000000000001, 8.));
#7310 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7290, #7300), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#7320 = EDGE_CURVE ('', #7280, #7190, #7310, .T.);
#7330 = ORIENTED_EDGE ('', *, *, #7320, .F.);
#7340 = CARTESIAN_POINT ('', (-11.7, 7.76702224700976, 6.29867965644035));
#7350 = VERTEX_POINT ('', #7340);
#7360 = CARTESIAN_POINT ('', (-11.7, 7.76702224700976, 6.29867965644035));
#7370 = CARTESIAN_POINT ('', (-12.3382775048174, 7.24941003902303, 6.93695716125773));
#7380 = CARTESIAN_POINT ('', (-12.9082529997164, 6.65742312512429, 7.50693265615678));
#7390 = CARTESIAN_POINT ('', (-13.4013203435596, 6.00000000000001, 8.));
#7400 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#7360, #7370, #7380, #7390), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.994966952547642, 0.994966952547642, 1.))
   REPRESENTATION_ITEM ('')
);
#7410 = EDGE_CURVE ('', #7350, #7280, #7400, .T.);
#7420 = ORIENTED_EDGE ('', *, *, #7410, .F.);
#7430 = CARTESIAN_POINT ('', (-9.99867965644036, 6.00000000000001, 8.));
#7440 = VERTEX_POINT ('', #7430);
#7450 = CARTESIAN_POINT ('', (-9.99867965644036, 6.00000000000001, 8.));
#7460 = CARTESIAN_POINT ('', (-10.4917470002836, 6.65742312512429, 7.50693265615678));
#7470 = CARTESIAN_POINT ('', (-11.0617224951826, 7.24941003902303, 6.93695716125773));
#7480 = CARTESIAN_POINT ('', (-11.7, 7.76702224700976, 6.29867965644035));
#7490 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#7450, #7460, #7470, #7480), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.994966952547642, 0.994966952547642, 1.))
   REPRESENTATION_ITEM ('')
);
#7500 = EDGE_CURVE ('', #7440, #7350, #7490, .T.);
#7510 = ORIENTED_EDGE ('', *, *, #7500, .F.);
#7520 = CARTESIAN_POINT ('', (-7., 6.00000000000001, 8.));
#7530 = VERTEX_POINT ('', #7520);
#7540 = CARTESIAN_POINT ('', (-7., 6.00000000000001, 8.));
#7550 = CARTESIAN_POINT ('', (-9.99867965644036, 6.00000000000001, 8.));
#7560 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7540, #7550), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#7570 = EDGE_CURVE ('', #7530, #7440, #7560, .T.);
#7580 = ORIENTED_EDGE ('', *, *, #7570, .F.);
#7590 = CARTESIAN_POINT ('', (-7., -6.00000000000001, 8.));
#7600 = VERTEX_POINT ('', #7590);
#7610 = CARTESIAN_POINT ('', (-6.99999999999999, -6.00000000000001, 7.99999999999999));
#7620 = CARTESIAN_POINT ('', (-7., -9.84572931585235E-15, 12.5));
#7630 = CARTESIAN_POINT ('', (-6.99999999999999, 5.99999999999999, 8.));
#7640 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#7610, #7620, #7630), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (323.130102354156, 396.869897645844), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.8, 1.))
   REPRESENTATION_ITEM ('')
);
#7650 = EDGE_CURVE ('', #7600, #7530, #7640, .T.);
#7660 = ORIENTED_EDGE ('', *, *, #7650, .F.);
#7670 = CARTESIAN_POINT ('', (-9.99867965644036, -6.00000000000001, 8.));
#7680 = VERTEX_POINT ('', #7670);
#7690 = CARTESIAN_POINT ('', (-9.99867965644036, -6.00000000000001, 8.));
#7700 = CARTESIAN_POINT ('', (-7., -6.00000000000001, 8.));
#7710 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7690, #7700), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#7720 = EDGE_CURVE ('', #7680, #7600, #7710, .T.);
#7730 = ORIENTED_EDGE ('', *, *, #7720, .F.);
#7740 = CARTESIAN_POINT ('', (-11.7, -7.76702224700974, 6.29867965644035));
#7750 = VERTEX_POINT ('', #7740);
#7760 = CARTESIAN_POINT ('', (-11.7, -7.76702224700974, 6.29867965644035));
#7770 = CARTESIAN_POINT ('', (-11.0617224951826, -7.24941003902303, 6.93695716125773));
#7780 = CARTESIAN_POINT ('', (-10.4917470002836, -6.65742312512429, 7.50693265615678));
#7790 = CARTESIAN_POINT ('', (-9.99867965644036, -6.00000000000001, 8.));
#7800 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#7760, #7770, #7780, #7790), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.994966952547642, 0.994966952547642, 1.))
   REPRESENTATION_ITEM ('')
);
#7810 = EDGE_CURVE ('', #7750, #7680, #7800, .T.);
#7820 = ORIENTED_EDGE ('', *, *, #7810, .F.);
#7830 = CARTESIAN_POINT ('', (-13.4013203435596, -6.00000000000001, 8.));
#7840 = VERTEX_POINT ('', #7830);
#7850 = CARTESIAN_POINT ('', (-13.4013203435596, -6.00000000000001, 8.));
#7860 = CARTESIAN_POINT ('', (-12.9082529997164, -6.65742312512429, 7.50693265615679));
#7870 = CARTESIAN_POINT ('', (-12.3382775048174, -7.24941003902303, 6.93695716125773));
#7880 = CARTESIAN_POINT ('', (-11.7, -7.76702224700974, 6.29867965644035));
#7890 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#7850, #7860, #7870, #7880), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.994966952547642, 0.994966952547642, 1.))
   REPRESENTATION_ITEM ('')
);
#7900 = EDGE_CURVE ('', #7840, #7750, #7890, .T.);
#7910 = ORIENTED_EDGE ('', *, *, #7900, .F.);
#7920 = CARTESIAN_POINT ('', (-13.9986796564404, -6.00000000000001, 8.));
#7930 = VERTEX_POINT ('', #7920);
#7940 = CARTESIAN_POINT ('', (-13.9986796564404, -6.00000000000001, 8.));
#7950 = CARTESIAN_POINT ('', (-13.4013203435596, -6.00000000000001, 8.));
#7960 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7940, #7950), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#7970 = EDGE_CURVE ('', #7930, #7840, #7960, .T.);
#7980 = ORIENTED_EDGE ('', *, *, #7970, .F.);
#7990 = CARTESIAN_POINT ('', (-15.7, -7.76702224700974, 6.29867965644035));
#8000 = VERTEX_POINT ('', #7990);
#8010 = CARTESIAN_POINT ('', (-15.7, -7.76702224700974, 6.29867965644035));
#8020 = CARTESIAN_POINT ('', (-15.0617224951826, -7.24941003902303, 6.93695716125773));
#8030 = CARTESIAN_POINT ('', (-14.4917470002836, -6.65742312512429, 7.50693265615678));
#8040 = CARTESIAN_POINT ('', (-13.9986796564404, -6.00000000000001, 8.));
#8050 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#8010, #8020, #8030, #8040), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.994966952547642, 0.994966952547642, 1.))
   REPRESENTATION_ITEM ('')
);
#8060 = EDGE_CURVE ('', #8000, #7930, #8050, .T.);
#8070 = ORIENTED_EDGE ('', *, *, #8060, .F.);
#8080 = CARTESIAN_POINT ('', (-17.4013203435596, -6.00000000000001, 8.));
#8090 = VERTEX_POINT ('', #8080);
#8100 = CARTESIAN_POINT ('', (-17.4013203435596, -6.00000000000001, 8.));
#8110 = CARTESIAN_POINT ('', (-16.9082529997164, -6.65742312512429, 7.50693265615679));
#8120 = CARTESIAN_POINT ('', (-16.3382775048174, -7.24941003902303, 6.93695716125773));
#8130 = CARTESIAN_POINT ('', (-15.7, -7.76702224700974, 6.29867965644035));
#8140 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#8100, #8110, #8120, #8130), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.994966952547642, 0.994966952547642, 1.))
   REPRESENTATION_ITEM ('')
);
#8150 = EDGE_CURVE ('', #8090, #8000, #8140, .T.);
#8160 = ORIENTED_EDGE ('', *, *, #8150, .F.);
#8170 = CARTESIAN_POINT ('', (-17.9986796564404, -6.00000000000001, 8.));
#8180 = VERTEX_POINT ('', #8170);
#8190 = CARTESIAN_POINT ('', (-17.9986796564404, -6.00000000000001, 8.));
#8200 = CARTESIAN_POINT ('', (-17.4013203435596, -6.00000000000001, 8.));
#8210 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8190, #8200), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#8220 = EDGE_CURVE ('', #8180, #8090, #8210, .T.);
#8230 = ORIENTED_EDGE ('', *, *, #8220, .F.);
#8240 = CARTESIAN_POINT ('', (-19.7, -7.76702224700974, 6.29867965644035));
#8250 = VERTEX_POINT ('', #8240);
#8260 = CARTESIAN_POINT ('', (-19.7, -7.76702224700974, 6.29867965644035));
#8270 = CARTESIAN_POINT ('', (-19.0617224951826, -7.24941003902303, 6.93695716125773));
#8280 = CARTESIAN_POINT ('', (-18.4917470002836, -6.65742312512429, 7.50693265615678));
#8290 = CARTESIAN_POINT ('', (-17.9986796564404, -6.00000000000001, 8.));
#8300 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#8260, #8270, #8280, #8290), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.994966952547642, 0.994966952547642, 1.))
   REPRESENTATION_ITEM ('')
);
#8310 = EDGE_CURVE ('', #8250, #8180, #8300, .T.);
#8320 = ORIENTED_EDGE ('', *, *, #8310, .F.);
#8330 = CARTESIAN_POINT ('', (-21.4013203435596, -6.00000000000001, 8.));
#8340 = VERTEX_POINT ('', #8330);
#8350 = CARTESIAN_POINT ('', (-21.4013203435596, -6.00000000000001, 8.));
#8360 = CARTESIAN_POINT ('', (-20.9082529997164, -6.65742312512429, 7.50693265615679));
#8370 = CARTESIAN_POINT ('', (-20.3382775048174, -7.24941003902303, 6.93695716125773));
#8380 = CARTESIAN_POINT ('', (-19.7, -7.76702224700974, 6.29867965644035));
#8390 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#8350, #8360, #8370, #8380), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.994966952547642, 0.994966952547642, 1.))
   REPRESENTATION_ITEM ('')
);
#8400 = EDGE_CURVE ('', #8340, #8250, #8390, .T.);
#8410 = ORIENTED_EDGE ('', *, *, #8400, .F.);
#8420 = CARTESIAN_POINT ('', (-21.9986796564404, -6.00000000000001, 8.));
#8430 = VERTEX_POINT ('', #8420);
#8440 = CARTESIAN_POINT ('', (-21.9986796564404, -6.00000000000001, 8.));
#8450 = CARTESIAN_POINT ('', (-21.4013203435596, -6.00000000000001, 8.));
#8460 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8440, #8450), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#8470 = EDGE_CURVE ('', #8430, #8340, #8460, .T.);
#8480 = ORIENTED_EDGE ('', *, *, #8470, .F.);
#8490 = CARTESIAN_POINT ('', (-23.7, -7.76702224700974, 6.29867965644035));
#8500 = VERTEX_POINT ('', #8490);
#8510 = CARTESIAN_POINT ('', (-23.7, -7.76702224700974, 6.29867965644035));
#8520 = CARTESIAN_POINT ('', (-23.0617224951826, -7.24941003902303, 6.93695716125773));
#8530 = CARTESIAN_POINT ('', (-22.4917470002836, -6.65742312512429, 7.50693265615678));
#8540 = CARTESIAN_POINT ('', (-21.9986796564404, -6.00000000000001, 8.));
#8550 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#8510, #8520, #8530, #8540), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.994966952547642, 0.994966952547642, 1.))
   REPRESENTATION_ITEM ('')
);
#8560 = EDGE_CURVE ('', #8500, #8430, #8550, .T.);
#8570 = ORIENTED_EDGE ('', *, *, #8560, .F.);
#8580 = CARTESIAN_POINT ('', (-25.4013203435596, -6.00000000000001, 8.));
#8590 = VERTEX_POINT ('', #8580);
#8600 = CARTESIAN_POINT ('', (-25.4013203435596, -6.00000000000001, 8.));
#8610 = CARTESIAN_POINT ('', (-24.9082529997164, -6.65742312512429, 7.50693265615679));
#8620 = CARTESIAN_POINT ('', (-24.3382775048174, -7.24941003902303, 6.93695716125773));
#8630 = CARTESIAN_POINT ('', (-23.7, -7.76702224700974, 6.29867965644035));
#8640 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#8600, #8610, #8620, #8630), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.994966952547642, 0.994966952547642, 1.))
   REPRESENTATION_ITEM ('')
);
#8650 = EDGE_CURVE ('', #8590, #8500, #8640, .T.);
#8660 = ORIENTED_EDGE ('', *, *, #8650, .F.);
#8670 = CARTESIAN_POINT ('', (-25.9986796564404, -6.00000000000001, 8.));
#8680 = VERTEX_POINT ('', #8670);
#8690 = CARTESIAN_POINT ('', (-25.9986796564404, -6.00000000000001, 8.));
#8700 = CARTESIAN_POINT ('', (-25.4013203435596, -6.00000000000001, 8.));
#8710 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8690, #8700), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#8720 = EDGE_CURVE ('', #8680, #8590, #8710, .T.);
#8730 = ORIENTED_EDGE ('', *, *, #8720, .F.);
#8740 = CARTESIAN_POINT ('', (-27.7, -7.76702224700974, 6.29867965644035));
#8750 = VERTEX_POINT ('', #8740);
#8760 = CARTESIAN_POINT ('', (-27.7, -7.76702224700974, 6.29867965644035));
#8770 = CARTESIAN_POINT ('', (-27.0617224951826, -7.24941003902303, 6.93695716125773));
#8780 = CARTESIAN_POINT ('', (-26.4917470002836, -6.65742312512429, 7.50693265615678));
#8790 = CARTESIAN_POINT ('', (-25.9986796564404, -6.00000000000001, 8.));
#8800 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#8760, #8770, #8780, #8790), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.994966952547642, 0.994966952547642, 1.))
   REPRESENTATION_ITEM ('')
);
#8810 = EDGE_CURVE ('', #8750, #8680, #8800, .T.);
#8820 = ORIENTED_EDGE ('', *, *, #8810, .F.);
#8830 = CARTESIAN_POINT ('', (-29.4013203435596, -6.00000000000001, 8.));
#8840 = VERTEX_POINT ('', #8830);
#8850 = CARTESIAN_POINT ('', (-29.4013203435596, -6.00000000000001, 8.));
#8860 = CARTESIAN_POINT ('', (-28.9082529997164, -6.65742312512429, 7.50693265615679));
#8870 = CARTESIAN_POINT ('', (-28.3382775048174, -7.24941003902303, 6.93695716125773));
#8880 = CARTESIAN_POINT ('', (-27.7, -7.76702224700974, 6.29867965644035));
#8890 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#8850, #8860, #8870, #8880), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.994966952547642, 0.994966952547642, 1.))
   REPRESENTATION_ITEM ('')
);
#8900 = EDGE_CURVE ('', #8840, #8750, #8890, .T.);
#8910 = ORIENTED_EDGE ('', *, *, #8900, .F.);
#8920 = CARTESIAN_POINT ('', (-29.9986796564404, -6.00000000000001, 8.));
#8930 = VERTEX_POINT ('', #8920);
#8940 = CARTESIAN_POINT ('', (-29.9986796564404, -6.00000000000001, 8.));
#8950 = CARTESIAN_POINT ('', (-29.4013203435596, -6.00000000000001, 8.));
#8960 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8940, #8950), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#8970 = EDGE_CURVE ('', #8930, #8840, #8960, .T.);
#8980 = ORIENTED_EDGE ('', *, *, #8970, .F.);
#8990 = CARTESIAN_POINT ('', (-31.7, -7.76702224700974, 6.29867965644035));
#9000 = VERTEX_POINT ('', #8990);
#9010 = CARTESIAN_POINT ('', (-31.7, -7.76702224700974, 6.29867965644035));
#9020 = CARTESIAN_POINT ('', (-31.0617224951826, -7.24941003902303, 6.93695716125773));
#9030 = CARTESIAN_POINT ('', (-30.4917470002836, -6.65742312512429, 7.50693265615678));
#9040 = CARTESIAN_POINT ('', (-29.9986796564404, -6.00000000000001, 8.));
#9050 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#9010, #9020, #9030, #9040), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.994966952547642, 0.994966952547642, 1.))
   REPRESENTATION_ITEM ('')
);
#9060 = EDGE_CURVE ('', #9000, #8930, #9050, .T.);
#9070 = ORIENTED_EDGE ('', *, *, #9060, .F.);
#9080 = CARTESIAN_POINT ('', (-33.4013203435596, -6.00000000000001, 8.));
#9090 = VERTEX_POINT ('', #9080);
#9100 = CARTESIAN_POINT ('', (-33.4013203435596, -6.00000000000001, 8.));
#9110 = CARTESIAN_POINT ('', (-32.9082529997164, -6.65742312512429, 7.50693265615679));
#9120 = CARTESIAN_POINT ('', (-32.3382775048174, -7.24941003902303, 6.93695716125773));
#9130 = CARTESIAN_POINT ('', (-31.7, -7.76702224700974, 6.29867965644035));
#9140 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#9100, #9110, #9120, #9130), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.994966952547642, 0.994966952547642, 1.))
   REPRESENTATION_ITEM ('')
);
#9150 = EDGE_CURVE ('', #9090, #9000, #9140, .T.);
#9160 = ORIENTED_EDGE ('', *, *, #9150, .F.);
#9170 = CARTESIAN_POINT ('', (-37.9996207671431, -6., 8.));
#9180 = VERTEX_POINT ('', #9170);
#9190 = CARTESIAN_POINT ('', (-37.9996207671431, -6., 8.));
#9200 = CARTESIAN_POINT ('', (-33.4013203435596, -6.00000000000001, 8.));
#9210 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9190, #9200), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9220 = EDGE_CURVE ('', #9180, #9090, #9210, .T.);
#9230 = ORIENTED_EDGE ('', *, *, #9220, .F.);
#9240 = CARTESIAN_POINT ('', (-37.9996207671431, -6., 8.));
#9250 = CARTESIAN_POINT ('', (-37.9996207671431, -10., 5.));
#9260 = CARTESIAN_POINT ('', (-37.9996207671431, -10., -4.55256321433351E-15));
#9270 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#9240, #9250, #9260), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (126.869897645844, 179.561835621107), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.861021337825003, 0.926697180237449))
   REPRESENTATION_ITEM ('')
);
#9280 = EDGE_CURVE ('', #9180, #5290, #9270, .T.);
#9290 = ORIENTED_EDGE ('', *, *, #9280, .T.);
#9300 = ORIENTED_EDGE ('', *, *, #5990, .F.);
#9310 = CARTESIAN_POINT ('', (0., 10., 1.83697019872103E-15));
#9320 = VERTEX_POINT ('', #9310);
#9330 = CARTESIAN_POINT ('', (0., 10., 1.83697019872103E-15));
#9340 = CARTESIAN_POINT ('', (0., 10., 10.));
#9350 = CARTESIAN_POINT ('', (0., -1.22464679914735E-15, 10.));
#9360 = CARTESIAN_POINT ('', (0., -10., 10.));
#9370 = CARTESIAN_POINT ('', (0., -10., -6.12323399573677E-16));
#9380 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#9330, #9340, #9350, #9360, #9370), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 90., 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#9390 = EDGE_CURVE ('', #9320, #5950, #9380, .T.);
#9400 = ORIENTED_EDGE ('', *, *, #9390, .F.);
#9410 = CARTESIAN_POINT ('', (0., -10., -6.12323399573677E-16));
#9420 = CARTESIAN_POINT ('', (0., -10., -10.));
#9430 = CARTESIAN_POINT ('', (0., 1.97215226305253E-31, -10.));
#9440 = CARTESIAN_POINT ('', (0., 10., -10.));
#9450 = CARTESIAN_POINT ('', (0., 10., 1.83697019872103E-15));
#9460 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#9410, #9420, #9430, #9440, #9450), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#9470 = EDGE_CURVE ('', #5950, #9320, #9460, .T.);
#9480 = ORIENTED_EDGE ('', *, *, #9470, .F.);
#9490 = EDGE_LOOP ('', (#6000, #6010, #6080, #6170, #6260, #6330, #6420, #6510, #6580, #6670, #6760, #6830, #6920, #7010, #7080, #7170, #7260, #7330, #7420, #7510, #7580, #7660, #7730, #7820, #7910, #7980, #8070, #8160, #8230, #8320, #8410, #8480, #8570, #8660, #8730, #8820, #8910, #8980, #9070, #9160, #9230, #9290, #9300, #9400, #9480));
#9500 = FACE_OUTER_BOUND ('', #9490, .T.);
#9510 = CARTESIAN_POINT ('', (-41.8007828438574, -10., -1.83697019872103E-15));
#9520 = CARTESIAN_POINT ('', (3.80116207671431, -10., -1.83697019872103E-15));
#9530 = CARTESIAN_POINT ('', (-41.8007828438574, -10., -10.));
#9540 = CARTESIAN_POINT ('', (3.8011620767143, -10., -10.));
#9550 = CARTESIAN_POINT ('', (-41.8007828438574, -1.07620830402835E-16, -10.));
#9560 = CARTESIAN_POINT ('', (3.80116207671431, -1.07620830402835E-16, -10.));
#9570 = CARTESIAN_POINT ('', (-41.8007828438574, 10., -10.));
#9580 = CARTESIAN_POINT ('', (3.8011620767143, 10., -10.));
#9590 = CARTESIAN_POINT ('', (-41.8007828438574, 10., -1.16403343982657E-15));
#9600 = CARTESIAN_POINT ('', (3.80116207671431, 10., -1.16403343982657E-15));
#9610 = CARTESIAN_POINT ('', (-41.8007828438574, 10., 10.));
#9620 = CARTESIAN_POINT ('', (3.80116207671431, 10., 10.));
#9630 = CARTESIAN_POINT ('', (-41.8007828438574, 4.44089209850063E-16, 10.));
#9640 = CARTESIAN_POINT ('', (3.80116207671431, 4.44089209850063E-16, 10.));
#9650 = CARTESIAN_POINT ('', (-41.8007828438574, -10., 10.));
#9660 = CARTESIAN_POINT ('', (3.80116207671431, -10., 10.));
#9670 = CARTESIAN_POINT ('', (-41.8007828438574, -10., -1.83697019872103E-15));
#9680 = CARTESIAN_POINT ('', (3.80116207671431, -10., -1.83697019872103E-15));
#9690 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#9510, #9520), (#9530, #9540), (#9550, #9560), (#9570, #9580), (#9590, #9600), (#9610, #9620), (#9630, #9640), (#9650, #9660), (#9670, #9680)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#9700 = ADVANCED_FACE ('', (#9500), #9690, .T.);
#9710 = CARTESIAN_POINT ('', (23., 7.40000000000002, -16.));
#9720 = VERTEX_POINT ('', #9710);
#9730 = CARTESIAN_POINT ('', (23., 7.40000000000003, -27.2446342369133));
#9740 = CARTESIAN_POINT ('', (23., 7.40000000000004, -16.));
#9750 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9730, #9740), .UNSPECIFIED., .F., .U., (2, 2), (0.083407429575443, 0.916592570424557), .UNSPECIFIED.);
#9760 = EDGE_CURVE ('', #2770, #9720, #9750, .T.);
#9770 = ORIENTED_EDGE ('', *, *, #9760, .T.);
#9780 = CARTESIAN_POINT ('', (23., 7.40000000000002, -16.));
#9790 = CARTESIAN_POINT ('', (20.9, 7.40000000000002, -16.));
#9800 = CARTESIAN_POINT ('', (20.9, 9.50000000000002, -16.));
#9810 = CARTESIAN_POINT ('', (20.9, 11.6, -16.));
#9820 = CARTESIAN_POINT ('', (23., 11.6, -16.));
#9830 = CARTESIAN_POINT ('', (25.1, 11.6, -16.));
#9840 = CARTESIAN_POINT ('', (25.1, 9.50000000000002, -16.));
#9850 = CARTESIAN_POINT ('', (25.1, 7.40000000000002, -16.));
#9860 = CARTESIAN_POINT ('', (23., 7.40000000000002, -16.));
#9870 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#9780, #9790, #9800, #9810, #9820, #9830, #9840, #9850, #9860), .UNSPECIFIED., .T., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 2, 3), (0., 90., 180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#9880 = EDGE_CURVE ('', #9720, #9720, #9870, .T.);
#9890 = ORIENTED_EDGE ('', *, *, #9880, .F.);
#9900 = ORIENTED_EDGE ('', *, *, #9760, .F.);
#9910 = ORIENTED_EDGE ('', *, *, #2990, .T.);
#9920 = ORIENTED_EDGE ('', *, *, #2910, .T.);
#9930 = EDGE_LOOP ('', (#9770, #9890, #9900, #9910, #9920));
#9940 = FACE_OUTER_BOUND ('', #9930, .T.);
#9950 = CARTESIAN_POINT ('', (23., 7.40000000000004, -14.8743365763087));
#9960 = CARTESIAN_POINT ('', (23., 7.40000000000002, -28.3702976606046));
#9970 = CARTESIAN_POINT ('', (25.1, 7.40000000000004, -14.8743365763087));
#9980 = CARTESIAN_POINT ('', (25.1, 7.40000000000003, -28.3702976606046));
#9990 = CARTESIAN_POINT ('', (25.1, 9.50000000000005, -14.8743365763087));
#10000 = CARTESIAN_POINT ('', (25.1, 9.50000000000002, -28.3702976606046));
#10010 = CARTESIAN_POINT ('', (25.1, 11.6, -14.8743365763087));
#10020 = CARTESIAN_POINT ('', (25.1, 11.6, -28.3702976606046));
#10030 = CARTESIAN_POINT ('', (23., 11.6, -14.8743365763087));
#10040 = CARTESIAN_POINT ('', (23., 11.6, -28.3702976606046));
#10050 = CARTESIAN_POINT ('', (20.9, 11.6, -14.8743365763087));
#10060 = CARTESIAN_POINT ('', (20.9, 11.6, -28.3702976606046));
#10070 = CARTESIAN_POINT ('', (20.9, 9.50000000000005, -14.8743365763087));
#10080 = CARTESIAN_POINT ('', (20.9, 9.50000000000002, -28.3702976606046));
#10090 = CARTESIAN_POINT ('', (20.9, 7.40000000000004, -14.8743365763087));
#10100 = CARTESIAN_POINT ('', (20.9, 7.40000000000003, -28.3702976606046));
#10110 = CARTESIAN_POINT ('', (23., 7.40000000000004, -14.8743365763087));
#10120 = CARTESIAN_POINT ('', (23., 7.40000000000002, -28.3702976606046));
#10130 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#9950, #9960), (#9970, #9980), (#9990, #10000), (#10010, #10020), (#10030, #10040), (#10050, #10060), (#10070, #10080), (#10090, #10100), (#10110, #10120)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#10140 = ADVANCED_FACE ('', (#9940), #10130, .T.);
#10150 = CARTESIAN_POINT ('', (30., 30., -16.5));
#10160 = VERTEX_POINT ('', #10150);
#10170 = CARTESIAN_POINT ('', (30., -25., -16.5));
#10180 = VERTEX_POINT ('', #10170);
#10190 = CARTESIAN_POINT ('', (30., 30., -16.5));
#10200 = CARTESIAN_POINT ('', (30., -25., -16.5));
#10210 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10190, #10200), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10220 = EDGE_CURVE ('', #10160, #10180, #10210, .T.);
#10230 = ORIENTED_EDGE ('', *, *, #10220, .T.);
#10240 = CARTESIAN_POINT ('', (30., -25., -19.));
#10250 = VERTEX_POINT ('', #10240);
#10260 = CARTESIAN_POINT ('', (30., -25., -16.5));
#10270 = CARTESIAN_POINT ('', (30., -25., -19.));
#10280 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10260, #10270), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10290 = EDGE_CURVE ('', #10180, #10250, #10280, .T.);
#10300 = ORIENTED_EDGE ('', *, *, #10290, .T.);
#10310 = CARTESIAN_POINT ('', (30., 16.0525588832576, -30.));
#10320 = VERTEX_POINT ('', #10310);
#10330 = CARTESIAN_POINT ('', (30., -25., -19.));
#10340 = CARTESIAN_POINT ('', (30., 16.0525588832576, -30.));
#10350 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10330, #10340), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10360 = EDGE_CURVE ('', #10250, #10320, #10350, .T.);
#10370 = ORIENTED_EDGE ('', *, *, #10360, .T.);
#10380 = CARTESIAN_POINT ('', (30., 30., -30.));
#10390 = VERTEX_POINT ('', #10380);
#10400 = CARTESIAN_POINT ('', (30., 16.0525588832576, -30.));
#10410 = CARTESIAN_POINT ('', (30., 30., -30.));
#10420 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10400, #10410), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10430 = EDGE_CURVE ('', #10320, #10390, #10420, .T.);
#10440 = ORIENTED_EDGE ('', *, *, #10430, .T.);
#10450 = CARTESIAN_POINT ('', (30., 30., -30.));
#10460 = CARTESIAN_POINT ('', (30., 30., -16.5));
#10470 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10450, #10460), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10480 = EDGE_CURVE ('', #10390, #10160, #10470, .T.);
#10490 = ORIENTED_EDGE ('', *, *, #10480, .T.);
#10500 = EDGE_LOOP ('', (#10230, #10300, #10370, #10440, #10490));
#10510 = FACE_OUTER_BOUND ('', #10500, .T.);
#10520 = CARTESIAN_POINT ('', (30., 30.001, -16.499));
#10530 = CARTESIAN_POINT ('', (30., 30.001, -30.001));
#10540 = CARTESIAN_POINT ('', (30., -25.001, -16.499));
#10550 = CARTESIAN_POINT ('', (30., -25.001, -30.001));
#10560 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#10520, #10530), (#10540, #10550)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-7.001, 48.001), (14.499, 28.001), .UNSPECIFIED.);
#10570 = ADVANCED_FACE ('', (#10510), #10560, .T.);
#10580 = CARTESIAN_POINT ('', (29.5, -25., -16.));
#10590 = VERTEX_POINT ('', #10580);
#10600 = CARTESIAN_POINT ('', (30., -25., -16.5));
#10610 = CARTESIAN_POINT ('', (29.5, -25., -16.));
#10620 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10600, #10610), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10630 = EDGE_CURVE ('', #10180, #10590, #10620, .T.);
#10640 = ORIENTED_EDGE ('', *, *, #10630, .F.);
#10650 = ORIENTED_EDGE ('', *, *, #10220, .F.);
#10660 = CARTESIAN_POINT ('', (29.5, 30., -16.));
#10670 = VERTEX_POINT ('', #10660);
#10680 = CARTESIAN_POINT ('', (29.5, 30., -16.));
#10690 = CARTESIAN_POINT ('', (30., 30., -16.5));
#10700 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10680, #10690), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10710 = EDGE_CURVE ('', #10670, #10160, #10700, .T.);
#10720 = ORIENTED_EDGE ('', *, *, #10710, .F.);
#10730 = CARTESIAN_POINT ('', (29.5, -25., -16.));
#10740 = CARTESIAN_POINT ('', (29.5, 30., -16.));
#10750 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10730, #10740), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10760 = EDGE_CURVE ('', #10590, #10670, #10750, .T.);
#10770 = ORIENTED_EDGE ('', *, *, #10760, .F.);
#10780 = EDGE_LOOP ('', (#10640, #10650, #10720, #10770));
#10790 = FACE_OUTER_BOUND ('', #10780, .T.);
#10800 = CARTESIAN_POINT ('', (29.499, -25.001, -15.999));
#10810 = CARTESIAN_POINT ('', (29.499, 30.001, -15.999));
#10820 = CARTESIAN_POINT ('', (30.001, -25.001, -16.501));
#10830 = CARTESIAN_POINT ('', (30.001, 30.001, -16.501));
#10840 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#10800, #10810), (#10820, #10830)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.708520994748923, 0.00141421356237004), (-55.001, 0.00100000000000122), .UNSPECIFIED.);
#10850 = ADVANCED_FACE ('', (#10790), #10840, .T.);
#10860 = CARTESIAN_POINT ('', (0.300000000000002, 23., 25.));
#10870 = VERTEX_POINT ('', #10860);
#10880 = CARTESIAN_POINT ('', (0.3, 23., 9.79795897113273));
#10890 = VERTEX_POINT ('', #10880);
#10900 = CARTESIAN_POINT ('', (0.300000000000002, 23., 25.));
#10910 = CARTESIAN_POINT ('', (0.3, 23., 9.79795897113273));
#10920 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10900, #10910), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10930 = EDGE_CURVE ('', #10870, #10890, #10920, .T.);
#10940 = ORIENTED_EDGE ('', *, *, #10930, .F.);
#10950 = CARTESIAN_POINT ('', (30., 23., 25.));
#10960 = VERTEX_POINT ('', #10950);
#10970 = CARTESIAN_POINT ('', (30., 23., 25.));
#10980 = CARTESIAN_POINT ('', (0.300000000000001, 23., 25.));
#10990 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10970, #10980), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11000 = EDGE_CURVE ('', #10960, #10870, #10990, .T.);
#11010 = ORIENTED_EDGE ('', *, *, #11000, .F.);
#11020 = CARTESIAN_POINT ('', (30., 23., 23.749938913895));
#11030 = VERTEX_POINT ('', #11020);
#11040 = CARTESIAN_POINT ('', (30., 23., 23.749938913895));
#11050 = CARTESIAN_POINT ('', (30., 23., 25.));
#11060 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11040, #11050), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11070 = EDGE_CURVE ('', #11030, #10960, #11060, .T.);
#11080 = ORIENTED_EDGE ('', *, *, #11070, .F.);
#11090 = CARTESIAN_POINT ('', (23.5, 23., 23.749938913895));
#11100 = VERTEX_POINT ('', #11090);
#11110 = CARTESIAN_POINT ('', (30., 23., 23.749938913895));
#11120 = CARTESIAN_POINT ('', (23.5, 23., 23.749938913895));
#11130 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11110, #11120), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11140 = EDGE_CURVE ('', #11030, #11100, #11130, .T.);
#11150 = ORIENTED_EDGE ('', *, *, #11140, .T.);
#11160 = CARTESIAN_POINT ('', (23.5, 23., 11.2070032884445));
#11170 = VERTEX_POINT ('', #11160);
#11180 = CARTESIAN_POINT ('', (23.5, 23., 11.2070032884445));
#11190 = CARTESIAN_POINT ('', (23.5, 23., 23.749938913895));
#11200 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11180, #11190), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11210 = EDGE_CURVE ('', #11170, #11100, #11200, .T.);
#11220 = ORIENTED_EDGE ('', *, *, #11210, .F.);
#11230 = CARTESIAN_POINT ('', (30., 23., 11.2070032884445));
#11240 = VERTEX_POINT ('', #11230);
#11250 = CARTESIAN_POINT ('', (30., 23., 11.2070032884445));
#11260 = CARTESIAN_POINT ('', (23.5, 23., 11.2070032884445));
#11270 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11250, #11260), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11280 = EDGE_CURVE ('', #11240, #11170, #11270, .T.);
#11290 = ORIENTED_EDGE ('', *, *, #11280, .F.);
#11300 = CARTESIAN_POINT ('', (30., 23., 6.00000000000001));
#11310 = CARTESIAN_POINT ('', (30., 23., 11.2070032884445));
#11320 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11300, #11310), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11330 = EDGE_CURVE ('', #2110, #11240, #11320, .T.);
#11340 = ORIENTED_EDGE ('', *, *, #11330, .F.);
#11350 = ORIENTED_EDGE ('', *, *, #2150, .F.);
#11360 = CARTESIAN_POINT ('', (16., 23., -2.));
#11370 = VERTEX_POINT ('', #11360);
#11380 = CARTESIAN_POINT ('', (16., 23., -2.));
#11390 = CARTESIAN_POINT ('', (16., 23., 6.00000000000001));
#11400 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11380, #11390), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11410 = EDGE_CURVE ('', #11370, #2090, #11400, .T.);
#11420 = ORIENTED_EDGE ('', *, *, #11410, .F.);
#11430 = CARTESIAN_POINT ('', (0., 23., -2.));
#11440 = VERTEX_POINT ('', #11430);
#11450 = CARTESIAN_POINT ('', (16., 23., -2.));
#11460 = CARTESIAN_POINT ('', (0., 23., -2.));
#11470 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11450, #11460), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11480 = EDGE_CURVE ('', #11370, #11440, #11470, .T.);
#11490 = ORIENTED_EDGE ('', *, *, #11480, .T.);
#11500 = CARTESIAN_POINT ('', (0., 23., 9.79795897113273));
#11510 = VERTEX_POINT ('', #11500);
#11520 = CARTESIAN_POINT ('', (0., 23., -2.));
#11530 = CARTESIAN_POINT ('', (0., 23., 9.79795897113273));
#11540 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11520, #11530), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11550 = EDGE_CURVE ('', #11440, #11510, #11540, .T.);
#11560 = ORIENTED_EDGE ('', *, *, #11550, .T.);
#11570 = CARTESIAN_POINT ('', (0.3, 23., 9.79795897113273));
#11580 = CARTESIAN_POINT ('', (0., 23., 9.79795897113273));
#11590 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11570, #11580), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11600 = EDGE_CURVE ('', #10890, #11510, #11590, .T.);
#11610 = ORIENTED_EDGE ('', *, *, #11600, .F.);
#11620 = EDGE_LOOP ('', (#10940, #11010, #11080, #11150, #11220, #11290, #11340, #11350, #11420, #11490, #11560, #11610));
#11630 = FACE_OUTER_BOUND ('', #11620, .T.);
#11640 = CARTESIAN_POINT ('', (30.001, 23., 25.001));
#11650 = CARTESIAN_POINT ('', (-0.00100000000000122, 23., 25.001));
#11660 = CARTESIAN_POINT ('', (30.001, 23., -2.00099999999999));
#11670 = CARTESIAN_POINT ('', (-0.00100000000000122, 23., -2.00099999999999));
#11680 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#11640, #11650), (#11660, #11670)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-27.001, 0.00100000000000122), (-0.00100000000000122, 30.001), .UNSPECIFIED.);
#11690 = ADVANCED_FACE ('', (#11630), #11680, .T.);
#11700 = ORIENTED_EDGE ('', *, *, #10290, .F.);
#11710 = ORIENTED_EDGE ('', *, *, #10630, .T.);
#11720 = CARTESIAN_POINT ('', (18., -25., -16.));
#11730 = VERTEX_POINT ('', #11720);
#11740 = CARTESIAN_POINT ('', (29.5, -25., -16.));
#11750 = CARTESIAN_POINT ('', (18., -25., -16.));
#11760 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11740, #11750), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11770 = EDGE_CURVE ('', #10590, #11730, #11760, .T.);
#11780 = ORIENTED_EDGE ('', *, *, #11770, .T.);
#11790 = CARTESIAN_POINT ('', (18., -25., -16.3));
#11800 = VERTEX_POINT ('', #11790);
#11810 = CARTESIAN_POINT ('', (18., -25., -16.3));
#11820 = CARTESIAN_POINT ('', (18., -25., -16.));
#11830 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11810, #11820), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11840 = EDGE_CURVE ('', #11800, #11730, #11830, .T.);
#11850 = ORIENTED_EDGE ('', *, *, #11840, .F.);
#11860 = CARTESIAN_POINT ('', (16., -25., -16.3));
#11870 = VERTEX_POINT ('', #11860);
#11880 = CARTESIAN_POINT ('', (16., -25., -16.3));
#11890 = CARTESIAN_POINT ('', (18., -25., -16.3));
#11900 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11880, #11890), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11910 = EDGE_CURVE ('', #11870, #11800, #11900, .T.);
#11920 = ORIENTED_EDGE ('', *, *, #11910, .F.);
#11930 = CARTESIAN_POINT ('', (16., -25., 5.99999999999998));
#11940 = CARTESIAN_POINT ('', (16., -25., -16.3));
#11950 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11930, #11940), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11960 = EDGE_CURVE ('', #2250, #11870, #11950, .T.);
#11970 = ORIENTED_EDGE ('', *, *, #11960, .F.);
#11980 = ORIENTED_EDGE ('', *, *, #2290, .F.);
#11990 = CARTESIAN_POINT ('', (30., -25., 19.));
#12000 = VERTEX_POINT ('', #11990);
#12010 = CARTESIAN_POINT ('', (30., -25., 19.));
#12020 = CARTESIAN_POINT ('', (30., -25., 5.99999999999998));
#12030 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#12010, #12020), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#12040 = EDGE_CURVE ('', #12000, #2180, #12030, .T.);
#12050 = ORIENTED_EDGE ('', *, *, #12040, .F.);
#12060 = CARTESIAN_POINT ('', (0.300000000000002, -25., 19.));
#12070 = VERTEX_POINT ('', #12060);
#12080 = CARTESIAN_POINT ('', (30., -25., 19.));
#12090 = CARTESIAN_POINT ('', (0.300000000000001, -25., 19.));
#12100 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#12080, #12090), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#12110 = EDGE_CURVE ('', #12000, #12070, #12100, .T.);
#12120 = ORIENTED_EDGE ('', *, *, #12110, .T.);
#12130 = CARTESIAN_POINT ('', (0.3, -25., -4.59242549680257E-15));
#12140 = CARTESIAN_POINT ('', (0.300000000000002, -25., 19.));
#12150 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#12130, #12140), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#12160 = EDGE_CURVE ('', #4110, #12070, #12150, .T.);
#12170 = ORIENTED_EDGE ('', *, *, #12160, .F.);
#12180 = CARTESIAN_POINT ('', (0.300000000000002, -25., -19.));
#12190 = VERTEX_POINT ('', #12180);
#12200 = CARTESIAN_POINT ('', (0.300000000000002, -25., -19.));
#12210 = CARTESIAN_POINT ('', (0.3, -25., -4.59242549680257E-15));
#12220 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#12200, #12210), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#12230 = EDGE_CURVE ('', #12190, #4110, #12220, .T.);
#12240 = ORIENTED_EDGE ('', *, *, #12230, .F.);
#12250 = CARTESIAN_POINT ('', (30., -25., -19.));
#12260 = CARTESIAN_POINT ('', (0.300000000000001, -25., -19.));
#12270 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#12250, #12260), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#12280 = EDGE_CURVE ('', #10250, #12190, #12270, .T.);
#12290 = ORIENTED_EDGE ('', *, *, #12280, .F.);
#12300 = EDGE_LOOP ('', (#11700, #11710, #11780, #11850, #11920, #11970, #11980, #12050, #12120, #12170, #12240, #12290));
#12310 = FACE_OUTER_BOUND ('', #12300, .T.);
#12320 = CARTESIAN_POINT ('', (30.001, -25., 19.001));
#12330 = CARTESIAN_POINT ('', (30.001, -25., -19.001));
#12340 = CARTESIAN_POINT ('', (0.298999999999999, -25., 19.001));
#12350 = CARTESIAN_POINT ('', (0.298999999999999, -25., -19.001));
#12360 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#12320, #12330), (#12340, #12350)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-29.701, 0.00100000000000122), (-38.001, 0.00100000000000122), .UNSPECIFIED.);
#12370 = ADVANCED_FACE ('', (#12310), #12360, .T.);
#12380 = CARTESIAN_POINT ('', (18., 30., -16.));
#12390 = VERTEX_POINT ('', #12380);
#12400 = CARTESIAN_POINT ('', (29.5, 30., -16.));
#12410 = CARTESIAN_POINT ('', (18., 30., -16.));
#12420 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#12400, #12410), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#12430 = EDGE_CURVE ('', #10670, #12390, #12420, .T.);
#12440 = ORIENTED_EDGE ('', *, *, #12430, .F.);
#12450 = ORIENTED_EDGE ('', *, *, #10710, .T.);
#12460 = ORIENTED_EDGE ('', *, *, #10480, .F.);
#12470 = CARTESIAN_POINT ('', (12.1243556529823, 30., -30.));
#12480 = VERTEX_POINT ('', #12470);
#12490 = CARTESIAN_POINT ('', (30., 30., -30.));
#12500 = CARTESIAN_POINT ('', (12.1243556529823, 30., -30.));
#12510 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#12490, #12500), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#12520 = EDGE_CURVE ('', #10390, #12480, #12510, .T.);
#12530 = ORIENTED_EDGE ('', *, *, #12520, .T.);
#12540 = CARTESIAN_POINT ('', (0.3, 30., -23.1732050807569));
#12550 = VERTEX_POINT ('', #12540);
#12560 = CARTESIAN_POINT ('', (0.3, 30., -23.1732050807569));
#12570 = CARTESIAN_POINT ('', (12.1243556529823, 30., -30.));
#12580 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#12560, #12570), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#12590 = EDGE_CURVE ('', #12550, #12480, #12580, .T.);
#12600 = ORIENTED_EDGE ('', *, *, #12590, .F.);
#12610 = CARTESIAN_POINT ('', (0.300000000000002, 30., -1.99999999999999));
#12620 = VERTEX_POINT ('', #12610);
#12630 = CARTESIAN_POINT ('', (0.300000000000002, 30., -1.99999999999999));
#12640 = CARTESIAN_POINT ('', (0.3, 30., -23.1732050807569));
#12650 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#12630, #12640), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#12660 = EDGE_CURVE ('', #12620, #12550, #12650, .T.);
#12670 = ORIENTED_EDGE ('', *, *, #12660, .F.);
#12680 = CARTESIAN_POINT ('', (16., 30., -1.99999999999999));
#12690 = VERTEX_POINT ('', #12680);
#12700 = CARTESIAN_POINT ('', (16., 30., -1.99999999999999));
#12710 = CARTESIAN_POINT ('', (0.300000000000002, 30., -1.99999999999999));
#12720 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#12700, #12710), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#12730 = EDGE_CURVE ('', #12690, #12620, #12720, .T.);
#12740 = ORIENTED_EDGE ('', *, *, #12730, .F.);
#12750 = CARTESIAN_POINT ('', (16., 30., -16.3));
#12760 = VERTEX_POINT ('', #12750);
#12770 = CARTESIAN_POINT ('', (16., 30., -16.3));
#12780 = CARTESIAN_POINT ('', (16., 30., -1.99999999999999));
#12790 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#12770, #12780), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#12800 = EDGE_CURVE ('', #12760, #12690, #12790, .T.);
#12810 = ORIENTED_EDGE ('', *, *, #12800, .F.);
#12820 = CARTESIAN_POINT ('', (18., 30., -16.3));
#12830 = VERTEX_POINT ('', #12820);
#12840 = CARTESIAN_POINT ('', (18., 30., -16.3));
#12850 = CARTESIAN_POINT ('', (16., 30., -16.3));
#12860 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#12840, #12850), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#12870 = EDGE_CURVE ('', #12830, #12760, #12860, .T.);
#12880 = ORIENTED_EDGE ('', *, *, #12870, .F.);
#12890 = CARTESIAN_POINT ('', (18., 30., -16.));
#12900 = CARTESIAN_POINT ('', (18., 30., -16.3));
#12910 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#12890, #12900), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#12920 = EDGE_CURVE ('', #12390, #12830, #12910, .T.);
#12930 = ORIENTED_EDGE ('', *, *, #12920, .F.);
#12940 = EDGE_LOOP ('', (#12440, #12450, #12460, #12530, #12600, #12670, #12740, #12810, #12880, #12930));
#12950 = FACE_OUTER_BOUND ('', #12940, .T.);
#12960 = CARTESIAN_POINT ('', (30.001, 30., -1.99899999999999));
#12970 = CARTESIAN_POINT ('', (0.298999999999999, 30., -1.99899999999999));
#12980 = CARTESIAN_POINT ('', (30.001, 30., -30.001));
#12990 = CARTESIAN_POINT ('', (0.298999999999999, 30., -30.001));
#13000 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#12960, #12970), (#12980, #12990)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-28.001, 0.000999999999999668), (-0.00100000000000122, 29.701), .UNSPECIFIED.);
#13010 = ADVANCED_FACE ('', (#12950), #13000, .T.);
#13020 = CARTESIAN_POINT ('', (0.3, 24.9198715887542, -2.));
#13030 = VERTEX_POINT ('', #13020);
#13040 = CARTESIAN_POINT ('', (0.3, 24.9198715887542, -2.));
#13050 = CARTESIAN_POINT ('', (0.300000000000002, 30., -1.99999999999999));
#13060 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#13040, #13050), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#13070 = EDGE_CURVE ('', #13030, #12620, #13060, .T.);
#13080 = ORIENTED_EDGE ('', *, *, #13070, .F.);
#13090 = CARTESIAN_POINT ('', (0., 24.9198715887542, -2.));
#13100 = VERTEX_POINT ('', #13090);
#13110 = CARTESIAN_POINT ('', (0., 24.9198715887542, -2.));
#13120 = CARTESIAN_POINT ('', (0.3, 24.9198715887542, -2.));
#13130 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#13110, #13120), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#13140 = EDGE_CURVE ('', #13100, #13030, #13130, .T.);
#13150 = ORIENTED_EDGE ('', *, *, #13140, .F.);
#13160 = CARTESIAN_POINT ('', (0., 24.9198715887542, -2.));
#13170 = CARTESIAN_POINT ('', (0., 23., -2.));
#13180 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#13160, #13170), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#13190 = EDGE_CURVE ('', #13100, #11440, #13180, .T.);
#13200 = ORIENTED_EDGE ('', *, *, #13190, .T.);
#13210 = ORIENTED_EDGE ('', *, *, #11480, .F.);
#13220 = CARTESIAN_POINT ('', (16., 30., -1.99999999999999));
#13230 = CARTESIAN_POINT ('', (16., 23., -2.));
#13240 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#13220, #13230), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#13250 = EDGE_CURVE ('', #12690, #11370, #13240, .T.);
#13260 = ORIENTED_EDGE ('', *, *, #13250, .F.);
#13270 = ORIENTED_EDGE ('', *, *, #12730, .T.);
#13280 = EDGE_LOOP ('', (#13080, #13150, #13200, #13210, #13260, #13270));
#13290 = FACE_OUTER_BOUND ('', #13280, .T.);
#13300 = CARTESIAN_POINT ('', (16.001, 22.999, -2.));
#13310 = CARTESIAN_POINT ('', (-0.00100000000000122, 22.999, -2.));
#13320 = CARTESIAN_POINT ('', (16.001, 30.001, -1.99999999999999));
#13330 = CARTESIAN_POINT ('', (-0.00100000000000122, 30.001, -1.99999999999999));
#13340 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#13300, #13310), (#13320, #13330)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-7.001, 0.00100000000000122), (13.999, 30.001), .UNSPECIFIED.);
#13350 = ADVANCED_FACE ('', (#13290), #13340, .T.);
#13360 = CARTESIAN_POINT ('', (0.300000000000002, -2.6076951545868, 25.));
#13370 = VERTEX_POINT ('', #13360);
#13380 = CARTESIAN_POINT ('', (0.3, -4.59242549680257E-15, 25.));
#13390 = VERTEX_POINT ('', #13380);
#13400 = CARTESIAN_POINT ('', (0.300000000000002, -2.6076951545868, 25.));
#13410 = CARTESIAN_POINT ('', (0.3, -4.59242549680257E-15, 25.));
#13420 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#13400, #13410), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#13430 = EDGE_CURVE ('', #13370, #13390, #13420, .T.);
#13440 = ORIENTED_EDGE ('', *, *, #13430, .F.);
#13450 = CARTESIAN_POINT ('', (30., -2.6076951545868, 25.));
#13460 = VERTEX_POINT ('', #13450);
#13470 = CARTESIAN_POINT ('', (30., -2.6076951545868, 25.));
#13480 = CARTESIAN_POINT ('', (0.300000000000001, -2.6076951545868, 25.));
#13490 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#13470, #13480), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#13500 = EDGE_CURVE ('', #13460, #13370, #13490, .T.);
#13510 = ORIENTED_EDGE ('', *, *, #13500, .F.);
#13520 = CARTESIAN_POINT ('', (30., 23., 25.));
#13530 = CARTESIAN_POINT ('', (30., -2.6076951545868, 25.));
#13540 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#13520, #13530), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#13550 = EDGE_CURVE ('', #10960, #13460, #13540, .T.);
#13560 = ORIENTED_EDGE ('', *, *, #13550, .F.);
#13570 = ORIENTED_EDGE ('', *, *, #11000, .T.);
#13580 = CARTESIAN_POINT ('', (0.3, -4.59242549680257E-15, 25.));
#13590 = CARTESIAN_POINT ('', (0.300000000000002, 23., 25.));
#13600 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#13580, #13590), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#13610 = EDGE_CURVE ('', #13390, #10870, #13600, .T.);
#13620 = ORIENTED_EDGE ('', *, *, #13610, .F.);
#13630 = EDGE_LOOP ('', (#13440, #13510, #13560, #13570, #13620));
#13640 = FACE_OUTER_BOUND ('', #13630, .T.);
#13650 = CARTESIAN_POINT ('', (30.001, -2.60869515458681, 25.));
#13660 = CARTESIAN_POINT ('', (0.298999999999999, -2.60869515458681, 25.));
#13670 = CARTESIAN_POINT ('', (30.001, 23.001, 25.));
#13680 = CARTESIAN_POINT ('', (0.298999999999999, 23.001, 25.));
#13690 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#13650, #13660), (#13670, #13680)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-25.6086951545868, 0.00099999999999989), (-0.00100000000000122, 29.701), .UNSPECIFIED.);
#13700 = ADVANCED_FACE ('', (#13640), #13690, .T.);
#13710 = CARTESIAN_POINT ('', (30., -2.6076951545868, 25.));
#13720 = CARTESIAN_POINT ('', (30., -25., 19.));
#13730 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#13710, #13720), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#13740 = EDGE_CURVE ('', #13460, #12000, #13730, .T.);
#13750 = ORIENTED_EDGE ('', *, *, #13740, .F.);
#13760 = ORIENTED_EDGE ('', *, *, #13500, .T.);
#13770 = CARTESIAN_POINT ('', (0.3, -3.55678486035565, 24.7456921797945));
#13780 = VERTEX_POINT ('', #13770);
#13790 = CARTESIAN_POINT ('', (0.3, -3.55678486035565, 24.7456921797945));
#13800 = CARTESIAN_POINT ('', (0.300000000000002, -2.6076951545868, 25.));
#13810 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#13790, #13800), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#13820 = EDGE_CURVE ('', #13780, #13370, #13810, .T.);
#13830 = ORIENTED_EDGE ('', *, *, #13820, .F.);
#13840 = CARTESIAN_POINT ('', (0., -3.55678486035567, 24.7456921797945));
#13850 = VERTEX_POINT ('', #13840);
#13860 = CARTESIAN_POINT ('', (0., -3.55678486035567, 24.7456921797945));
#13870 = CARTESIAN_POINT ('', (0.3, -3.55678486035565, 24.7456921797945));
#13880 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#13860, #13870), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#13890 = EDGE_CURVE ('', #13850, #13780, #13880, .T.);
#13900 = ORIENTED_EDGE ('', *, *, #13890, .F.);
#13910 = CARTESIAN_POINT ('', (0., -3.55678486035567, 24.7456921797945));
#13920 = CARTESIAN_POINT ('', (0., -9.29258004503342, 23.2087904921098));
#13930 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#13910, #13920), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#13940 = EDGE_CURVE ('', #13850, #4270, #13930, .T.);
#13950 = ORIENTED_EDGE ('', *, *, #13940, .T.);
#13960 = ORIENTED_EDGE ('', *, *, #4310, .F.);
#13970 = CARTESIAN_POINT ('', (0.300000000000002, -25., 19.));
#13980 = CARTESIAN_POINT ('', (0.3, -9.29258004503344, 23.2087904921098));
#13990 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#13970, #13980), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#14000 = EDGE_CURVE ('', #12070, #4190, #13990, .T.);
#14010 = ORIENTED_EDGE ('', *, *, #14000, .F.);
#14020 = ORIENTED_EDGE ('', *, *, #12110, .F.);
#14030 = EDGE_LOOP ('', (#13750, #13760, #13830, #13900, #13950, #13960, #14010, #14020));
#14040 = FACE_OUTER_BOUND ('', #14030, .T.);
#14050 = CARTESIAN_POINT ('', (30.001, -25.0011830127019, 18.9996830127019));
#14060 = CARTESIAN_POINT ('', (-0.00100000000000122, -25.0011830127019, 18.9996830127019));
#14070 = CARTESIAN_POINT ('', (30.001, -2.60651214188491, 25.0003169872981));
#14080 = CARTESIAN_POINT ('', (-0.00100000000000122, -2.60651214188491, 25.0003169872981));
#14090 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#14050, #14060), (#14070, #14080)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-23.183444575809, 0.00122474487139357), (-0.00100000000000122, 30.001), .UNSPECIFIED.);
#14100 = ADVANCED_FACE ('', (#14040), #14090, .T.);
#14110 = CARTESIAN_POINT ('', (0.300000000000004, -9.42538660821075, -23.1732050807569));
#14120 = VERTEX_POINT ('', #14110);
#14130 = CARTESIAN_POINT ('', (0.300000000000004, -9.42538660821075, -23.1732050807569));
#14140 = CARTESIAN_POINT ('', (0.300000000000002, -25., -19.));
#14150 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#14130, #14140), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#14160 = EDGE_CURVE ('', #14120, #12190, #14150, .T.);
#14170 = ORIENTED_EDGE ('', *, *, #14160, .F.);
#14180 = CARTESIAN_POINT ('', (12.1243556529823, 16.0525588832576, -30.));
#14190 = VERTEX_POINT ('', #14180);
#14200 = CARTESIAN_POINT ('', (0.300000000000004, -9.42538660821075, -23.1732050807569));
#14210 = CARTESIAN_POINT ('', (12.1243556529823, 16.0525588832576, -30.));
#14220 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#14200, #14210), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#14230 = EDGE_CURVE ('', #14120, #14190, #14220, .T.);
#14240 = ORIENTED_EDGE ('', *, *, #14230, .T.);
#14250 = CARTESIAN_POINT ('', (30., 16.0525588832576, -30.));
#14260 = CARTESIAN_POINT ('', (12.1243556529823, 16.0525588832576, -30.));
#14270 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#14250, #14260), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#14280 = EDGE_CURVE ('', #10320, #14190, #14270, .T.);
#14290 = ORIENTED_EDGE ('', *, *, #14280, .F.);
#14300 = ORIENTED_EDGE ('', *, *, #10360, .F.);
#14310 = ORIENTED_EDGE ('', *, *, #12280, .T.);
#14320 = EDGE_LOOP ('', (#14170, #14240, #14290, #14300, #14310));
#14330 = FACE_OUTER_BOUND ('', #14320, .T.);
#14340 = ORIENTED_EDGE ('', *, *, #3770, .T.);
#14350 = ORIENTED_EDGE ('', *, *, #3840, .T.);
#14360 = EDGE_LOOP ('', (#14340, #14350));
#14370 = FACE_BOUND ('', #14360, .T.);
#14380 = CARTESIAN_POINT ('', (30.001, 16.0537418959595, -30.0003169872981));
#14390 = CARTESIAN_POINT ('', (0.299000000000003, 16.0537418959595, -30.0003169872981));
#14400 = CARTESIAN_POINT ('', (30.001, -25.0011830127019, -18.9996830127019));
#14410 = CARTESIAN_POINT ('', (0.299000000000003, -25.0011830127019, -18.9996830127019));
#14420 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#14380, #14390), (#14400, #14410)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-42.5019611015904, 0.00122474487139357), (-0.00100000000000122, 29.701), .UNSPECIFIED.);
#14430 = ADVANCED_FACE ('', (#14330, #14370), #14420, .T.);
#14440 = CARTESIAN_POINT ('', (0., -3.55678486035568, 24.7456921797945));
#14450 = CARTESIAN_POINT ('', (0., 15.4674352653084, 27.4801098566735));
#14460 = CARTESIAN_POINT ('', (0., 23., 9.79795897113273));
#14470 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#14440, #14450, #14460), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (81.8206965565088, 156.926081934369), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.79279315077855, 1.))
   REPRESENTATION_ITEM ('')
);
#14480 = EDGE_CURVE ('', #13850, #11510, #14470, .T.);
#14490 = ORIENTED_EDGE ('', *, *, #14480, .T.);
#14500 = ORIENTED_EDGE ('', *, *, #11550, .F.);
#14510 = ORIENTED_EDGE ('', *, *, #13190, .F.);
#14520 = CARTESIAN_POINT ('', (3.46944695195361E-15, 9.79795897113273, -23.));
#14530 = VERTEX_POINT ('', #14520);
#14540 = CARTESIAN_POINT ('', (0., 24.9198715887542, -2.));
#14550 = CARTESIAN_POINT ('', (0., 23.7101185793445, -17.0734448242996));
#14560 = CARTESIAN_POINT ('', (0., 9.79795897113273, -23.));
#14570 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#14540, #14550, #14560), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (184.588565735786, 246.926081934369), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.855646599662505, 1.))
   REPRESENTATION_ITEM ('')
);
#14580 = EDGE_CURVE ('', #13100, #14530, #14570, .T.);
#14590 = ORIENTED_EDGE ('', *, *, #14580, .T.);
#14600 = CARTESIAN_POINT ('', (3.46944695195361E-15, 9.79795897113273, -23.));
#14610 = CARTESIAN_POINT ('', (-3.94430452610506E-31, -9.7979589711327, -23.));
#14620 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#14600, #14610), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#14630 = EDGE_CURVE ('', #14530, #4340, #14620, .T.);
#14640 = ORIENTED_EDGE ('', *, *, #14630, .T.);
#14650 = ORIENTED_EDGE ('', *, *, #4410, .T.);
#14660 = ORIENTED_EDGE ('', *, *, #13940, .F.);
#14670 = EDGE_LOOP ('', (#14490, #14500, #14510, #14590, #14640, #14650, #14660));
#14680 = FACE_OUTER_BOUND ('', #14670, .T.);
#14690 = ORIENTED_EDGE ('', *, *, #9470, .T.);
#14700 = ORIENTED_EDGE ('', *, *, #9390, .T.);
#14710 = EDGE_LOOP ('', (#14690, #14700));
#14720 = FACE_BOUND ('', #14710, .T.);
#14730 = CARTESIAN_POINT ('', (0., -25.182370280884, 27.4811098566735));
#14740 = CARTESIAN_POINT ('', (0., -25.182370280884, -23.001));
#14750 = CARTESIAN_POINT ('', (0., 24.9208715887542, 27.4811098566735));
#14760 = CARTESIAN_POINT ('', (0., 24.9208715887542, -23.001));
#14770 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#14730, #14740), (#14750, #14760)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1.92087158875422, 48.182370280884), (-29.4811098566735, 21.001), .UNSPECIFIED.);
#14780 = ADVANCED_FACE ('', (#14680, #14720), #14770, .T.);
#14790 = CARTESIAN_POINT ('', (0.300000000000001, -9.3809683021095, -23.1732050807569));
#14800 = CARTESIAN_POINT ('', (0.300000000000004, -9.42538660821075, -23.1732050807569));
#14810 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#14790, #14800), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#14820 = EDGE_CURVE ('', #4090, #14120, #14810, .T.);
#14830 = ORIENTED_EDGE ('', *, *, #14820, .F.);
#14840 = ORIENTED_EDGE ('', *, *, #4480, .F.);
#14850 = ORIENTED_EDGE ('', *, *, #14630, .F.);
#14860 = CARTESIAN_POINT ('', (0.300000000000001, 9.38096830210953, -23.1732050807569));
#14870 = VERTEX_POINT ('', #14860);
#14880 = CARTESIAN_POINT ('', (0.300000000000001, 9.38096830210953, -23.1732050807569));
#14890 = CARTESIAN_POINT ('', (0.202175542401191, 9.5204847009454, -23.1167261038289));
#14900 = CARTESIAN_POINT ('', (0.10217282385562, 9.65948536931361, -23.0589895073569));
#14910 = CARTESIAN_POINT ('', (3.46944695195361E-15, 9.79795897113273, -23.));
#14920 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#14880, #14890, #14900, #14910), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.999972815283336, 0.999972815283336, 1.))
   REPRESENTATION_ITEM ('')
);
#14930 = EDGE_CURVE ('', #14870, #14530, #14920, .T.);
#14940 = ORIENTED_EDGE ('', *, *, #14930, .F.);
#14950 = CARTESIAN_POINT ('', (0.3, 30., -23.1732050807569));
#14960 = CARTESIAN_POINT ('', (0.300000000000001, 9.38096830210953, -23.1732050807569));
#14970 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#14950, #14960), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#14980 = EDGE_CURVE ('', #12550, #14870, #14970, .T.);
#14990 = ORIENTED_EDGE ('', *, *, #14980, .F.);
#15000 = ORIENTED_EDGE ('', *, *, #12590, .T.);
#15010 = CARTESIAN_POINT ('', (12.1243556529823, 16.0525588832576, -30.));
#15020 = CARTESIAN_POINT ('', (12.1243556529823, 30., -30.));
#15030 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#15010, #15020), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#15040 = EDGE_CURVE ('', #14190, #12480, #15030, .T.);
#15050 = ORIENTED_EDGE ('', *, *, #15040, .F.);
#15060 = ORIENTED_EDGE ('', *, *, #14230, .F.);
#15070 = EDGE_LOOP ('', (#14830, #14840, #14850, #14940, #14990, #15000, #15050, #15060));
#15080 = FACE_OUTER_BOUND ('', #15070, .T.);
#15090 = CARTESIAN_POINT ('', (12.1255386656842, -9.7989589711327, -30.0006830127019));
#15100 = CARTESIAN_POINT ('', (12.1255386656842, 30.001, -30.0006830127019));
#15110 = CARTESIAN_POINT ('', (-0.00118301270188747, -9.7989589711327, -22.9993169872981));
#15120 = CARTESIAN_POINT ('', (-0.00118301270188526, 30.001, -22.9993169872981));
#15130 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#15090, #15100), (#15110, #15120)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-14.0013660254039, 0.00136602540378306), (29.2010410288674, 69.0010000000001), .UNSPECIFIED.);
#15140 = ADVANCED_FACE ('', (#15080), #15130, .T.);
#15150 = CARTESIAN_POINT ('', (23.5, 23., 11.2070032884445));
#15160 = CARTESIAN_POINT ('', (23.5, 17.2473318782053, 19.4226648000346));
#15170 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#15150, #15160), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#15180 = EDGE_CURVE ('', #11170, #4850, #15170, .T.);
#15190 = ORIENTED_EDGE ('', *, *, #15180, .F.);
#15200 = ORIENTED_EDGE ('', *, *, #11210, .T.);
#15210 = CARTESIAN_POINT ('', (23.5, 19.5000479965544, 23.7499999995812));
#15220 = CARTESIAN_POINT ('', (23.5, 23., 23.749938913895));
#15230 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#15210, #15220), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#15240 = EDGE_CURVE ('', #4920, #11100, #15230, .T.);
#15250 = ORIENTED_EDGE ('', *, *, #15240, .F.);
#15260 = ORIENTED_EDGE ('', *, *, #4990, .F.);
#15270 = EDGE_LOOP ('', (#15190, #15200, #15250, #15260));
#15280 = FACE_OUTER_BOUND ('', #15270, .T.);
#15290 = ORIENTED_EDGE ('', *, *, #670, .F.);
#15300 = ORIENTED_EDGE ('', *, *, #590, .F.);
#15310 = EDGE_LOOP ('', (#15290, #15300));
#15320 = FACE_BOUND ('', #15310, .T.);
#15330 = CARTESIAN_POINT ('', (23.5, 23.001, 23.7510291248919));
#15340 = CARTESIAN_POINT ('', (23.5, 23.001, 11.2060032884445));
#15350 = CARTESIAN_POINT ('', (23.5, 16.2891719656612, 23.7510291248919));
#15360 = CARTESIAN_POINT ('', (23.5, 16.2891719656612, 11.2060032884445));
#15370 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#15330, #15340), (#15350, #15360)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-6.71082803433876, 0.00100000000000122), (1.24897087510812, 13.7939967115555), .UNSPECIFIED.);
#15380 = ADVANCED_FACE ('', (#15280, #15320), #15370, .T.);
#15390 = ORIENTED_EDGE ('', *, *, #2220, .T.);
#15400 = ORIENTED_EDGE ('', *, *, #11330, .T.);
#15410 = CARTESIAN_POINT ('', (30., 23., 11.2070032884445));
#15420 = CARTESIAN_POINT ('', (30., 17.2473318782053, 19.4226648000346));
#15430 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#15410, #15420), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#15440 = EDGE_CURVE ('', #11240, #4730, #15430, .T.);
#15450 = ORIENTED_EDGE ('', *, *, #15440, .T.);
#15460 = ORIENTED_EDGE ('', *, *, #4820, .T.);
#15470 = CARTESIAN_POINT ('', (30., 19.5000479965544, 23.7499999995812));
#15480 = CARTESIAN_POINT ('', (30., 23., 23.749938913895));
#15490 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#15470, #15480), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#15500 = EDGE_CURVE ('', #4750, #11030, #15490, .T.);
#15510 = ORIENTED_EDGE ('', *, *, #15500, .T.);
#15520 = ORIENTED_EDGE ('', *, *, #11070, .T.);
#15530 = ORIENTED_EDGE ('', *, *, #13550, .T.);
#15540 = ORIENTED_EDGE ('', *, *, #13740, .T.);
#15550 = ORIENTED_EDGE ('', *, *, #12040, .T.);
#15560 = EDGE_LOOP ('', (#15390, #15400, #15450, #15460, #15510, #15520, #15530, #15540, #15550));
#15570 = FACE_OUTER_BOUND ('', #15560, .T.);
#15580 = CARTESIAN_POINT ('', (30., 23.001, 25.001));
#15590 = CARTESIAN_POINT ('', (30., 23.001, 5.99899999999999));
#15600 = CARTESIAN_POINT ('', (30., -25.001, 25.001));
#15610 = CARTESIAN_POINT ('', (30., -25.001, 5.99899999999998));
#15620 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#15580, #15590), (#15600, #15610)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00100000000000122, 48.001), (-27.001, -7.99899999999999), .UNSPECIFIED.);
#15630 = ADVANCED_FACE ('', (#15570), #15620, .T.);
#15640 = ORIENTED_EDGE ('', *, *, #7570, .T.);
#15650 = CARTESIAN_POINT ('', (-9.99867965644036, 6.00000000000001, 8.));
#15660 = CARTESIAN_POINT ('', (-9.99867965644036, -6.00000000000001, 8.));
#15670 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#15650, #15660), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#15680 = EDGE_CURVE ('', #7440, #7680, #15670, .T.);
#15690 = ORIENTED_EDGE ('', *, *, #15680, .T.);
#15700 = ORIENTED_EDGE ('', *, *, #7720, .T.);
#15710 = CARTESIAN_POINT ('', (-7., 6.00000000000001, 8.));
#15720 = CARTESIAN_POINT ('', (-7., -6.00000000000001, 8.));
#15730 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#15710, #15720), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#15740 = EDGE_CURVE ('', #7530, #7600, #15730, .T.);
#15750 = ORIENTED_EDGE ('', *, *, #15740, .F.);
#15760 = EDGE_LOOP ('', (#15640, #15690, #15700, #15750));
#15770 = FACE_OUTER_BOUND ('', #15760, .T.);
#15780 = CARTESIAN_POINT ('', (-6.999, -6.00100000000001, 8.));
#15790 = CARTESIAN_POINT ('', (-9.99967965644036, -6.00100000000001, 8.));
#15800 = CARTESIAN_POINT ('', (-6.999, 6.00100000000001, 8.));
#15810 = CARTESIAN_POINT ('', (-9.99967965644036, 6.00100000000001, 8.));
#15820 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#15780, #15790), (#15800, #15810)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (33.999, 46.001), (-33.001, -30.0003203435596), .UNSPECIFIED.);
#15830 = ADVANCED_FACE ('', (#15770), #15820, .T.);
#15840 = ORIENTED_EDGE ('', *, *, #7970, .T.);
#15850 = CARTESIAN_POINT ('', (-13.4013203435596, 6.00000000000001, 8.));
#15860 = CARTESIAN_POINT ('', (-13.4013203435596, -6.00000000000001, 8.));
#15870 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#15850, #15860), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#15880 = EDGE_CURVE ('', #7280, #7840, #15870, .T.);
#15890 = ORIENTED_EDGE ('', *, *, #15880, .F.);
#15900 = ORIENTED_EDGE ('', *, *, #7320, .T.);
#15910 = CARTESIAN_POINT ('', (-13.9986796564404, 6.00000000000001, 8.));
#15920 = CARTESIAN_POINT ('', (-13.9986796564404, -6.00000000000001, 8.));
#15930 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#15910, #15920), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#15940 = EDGE_CURVE ('', #7190, #7930, #15930, .T.);
#15950 = ORIENTED_EDGE ('', *, *, #15940, .T.);
#15960 = EDGE_LOOP ('', (#15840, #15890, #15900, #15950));
#15970 = FACE_OUTER_BOUND ('', #15960, .T.);
#15980 = CARTESIAN_POINT ('', (-13.4003203435596, -6.00100000000001, 8.));
#15990 = CARTESIAN_POINT ('', (-13.9996796564404, -6.00100000000001, 8.));
#16000 = CARTESIAN_POINT ('', (-13.4003203435596, 6.00100000000001, 8.));
#16010 = CARTESIAN_POINT ('', (-13.9996796564404, 6.00100000000001, 8.));
#16020 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#15980, #15990), (#16000, #16010)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (33.999, 46.001), (-26.5996796564404, -26.0003203435596), .UNSPECIFIED.);
#16030 = ADVANCED_FACE ('', (#15970), #16020, .T.);
#16040 = ORIENTED_EDGE ('', *, *, #6320, .T.);
#16050 = CARTESIAN_POINT ('', (-29.9986796564404, 6.00000000000001, 8.));
#16060 = CARTESIAN_POINT ('', (-29.9986796564404, -6.00000000000001, 8.));
#16070 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#16050, #16060), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#16080 = EDGE_CURVE ('', #6190, #8930, #16070, .T.);
#16090 = ORIENTED_EDGE ('', *, *, #16080, .T.);
#16100 = ORIENTED_EDGE ('', *, *, #8970, .T.);
#16110 = CARTESIAN_POINT ('', (-29.4013203435596, -6.00000000000001, 8.));
#16120 = CARTESIAN_POINT ('', (-29.4013203435596, 6.00000000000001, 8.));
#16130 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#16110, #16120), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#16140 = EDGE_CURVE ('', #8840, #6280, #16130, .T.);
#16150 = ORIENTED_EDGE ('', *, *, #16140, .T.);
#16160 = EDGE_LOOP ('', (#16040, #16090, #16100, #16150));
#16170 = FACE_OUTER_BOUND ('', #16160, .T.);
#16180 = CARTESIAN_POINT ('', (-29.4003203435596, -6.00100000000001, 8.));
#16190 = CARTESIAN_POINT ('', (-29.9996796564404, -6.00100000000001, 8.));
#16200 = CARTESIAN_POINT ('', (-29.4003203435596, 6.00100000000001, 8.));
#16210 = CARTESIAN_POINT ('', (-29.9996796564404, 6.00100000000001, 8.));
#16220 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#16180, #16190), (#16200, #16210)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (33.999, 46.001), (-10.5996796564404, -10.0003203435596), .UNSPECIFIED.);
#16230 = ADVANCED_FACE ('', (#16170), #16220, .T.);
#16240 = ORIENTED_EDGE ('', *, *, #6570, .T.);
#16250 = CARTESIAN_POINT ('', (-25.9986796564404, 6.00000000000001, 8.));
#16260 = CARTESIAN_POINT ('', (-25.9986796564404, -6.00000000000001, 8.));
#16270 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#16250, #16260), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#16280 = EDGE_CURVE ('', #6440, #8680, #16270, .T.);
#16290 = ORIENTED_EDGE ('', *, *, #16280, .T.);
#16300 = ORIENTED_EDGE ('', *, *, #8720, .T.);
#16310 = CARTESIAN_POINT ('', (-25.4013203435596, -6.00000000000001, 8.));
#16320 = CARTESIAN_POINT ('', (-25.4013203435596, 6.00000000000001, 8.));
#16330 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#16310, #16320), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#16340 = EDGE_CURVE ('', #8590, #6530, #16330, .T.);
#16350 = ORIENTED_EDGE ('', *, *, #16340, .T.);
#16360 = EDGE_LOOP ('', (#16240, #16290, #16300, #16350));
#16370 = FACE_OUTER_BOUND ('', #16360, .T.);
#16380 = CARTESIAN_POINT ('', (-25.4003203435596, -6.00100000000001, 8.));
#16390 = CARTESIAN_POINT ('', (-25.9996796564404, -6.00100000000001, 8.));
#16400 = CARTESIAN_POINT ('', (-25.4003203435596, 6.00100000000001, 8.));
#16410 = CARTESIAN_POINT ('', (-25.9996796564404, 6.00100000000001, 8.));
#16420 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#16380, #16390), (#16400, #16410)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (33.999, 46.001), (-14.5996796564404, -14.0003203435596), .UNSPECIFIED.);
#16430 = ADVANCED_FACE ('', (#16370), #16420, .T.);
#16440 = ORIENTED_EDGE ('', *, *, #6820, .T.);
#16450 = CARTESIAN_POINT ('', (-21.9986796564404, 6.00000000000001, 8.));
#16460 = CARTESIAN_POINT ('', (-21.9986796564404, -6.00000000000001, 8.));
#16470 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#16450, #16460), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#16480 = EDGE_CURVE ('', #6690, #8430, #16470, .T.);
#16490 = ORIENTED_EDGE ('', *, *, #16480, .T.);
#16500 = ORIENTED_EDGE ('', *, *, #8470, .T.);
#16510 = CARTESIAN_POINT ('', (-21.4013203435596, -6.00000000000001, 8.));
#16520 = CARTESIAN_POINT ('', (-21.4013203435596, 6.00000000000001, 8.));
#16530 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#16510, #16520), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#16540 = EDGE_CURVE ('', #8340, #6780, #16530, .T.);
#16550 = ORIENTED_EDGE ('', *, *, #16540, .T.);
#16560 = EDGE_LOOP ('', (#16440, #16490, #16500, #16550));
#16570 = FACE_OUTER_BOUND ('', #16560, .T.);
#16580 = CARTESIAN_POINT ('', (-21.4003203435596, -6.00100000000001, 8.));
#16590 = CARTESIAN_POINT ('', (-21.9996796564404, -6.00100000000001, 8.));
#16600 = CARTESIAN_POINT ('', (-21.4003203435596, 6.00100000000001, 8.));
#16610 = CARTESIAN_POINT ('', (-21.9996796564404, 6.00100000000001, 8.));
#16620 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#16580, #16590), (#16600, #16610)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (33.999, 46.001), (-18.5996796564404, -18.0003203435596), .UNSPECIFIED.);
#16630 = ADVANCED_FACE ('', (#16570), #16620, .T.);
#16640 = ORIENTED_EDGE ('', *, *, #8220, .T.);
#16650 = CARTESIAN_POINT ('', (-17.4013203435596, 6.00000000000001, 8.));
#16660 = CARTESIAN_POINT ('', (-17.4013203435596, -6.00000000000001, 8.));
#16670 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#16650, #16660), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#16680 = EDGE_CURVE ('', #7030, #8090, #16670, .T.);
#16690 = ORIENTED_EDGE ('', *, *, #16680, .F.);
#16700 = ORIENTED_EDGE ('', *, *, #7070, .T.);
#16710 = CARTESIAN_POINT ('', (-17.9986796564404, 6.00000000000001, 8.));
#16720 = CARTESIAN_POINT ('', (-17.9986796564404, -6.00000000000001, 8.));
#16730 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#16710, #16720), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#16740 = EDGE_CURVE ('', #6940, #8180, #16730, .T.);
#16750 = ORIENTED_EDGE ('', *, *, #16740, .T.);
#16760 = EDGE_LOOP ('', (#16640, #16690, #16700, #16750));
#16770 = FACE_OUTER_BOUND ('', #16760, .T.);
#16780 = CARTESIAN_POINT ('', (-17.4003203435596, -6.00100000000001, 8.));
#16790 = CARTESIAN_POINT ('', (-17.9996796564404, -6.00100000000001, 8.));
#16800 = CARTESIAN_POINT ('', (-17.4003203435596, 6.00100000000001, 8.));
#16810 = CARTESIAN_POINT ('', (-17.9996796564404, 6.00100000000001, 8.));
#16820 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#16780, #16790), (#16800, #16810)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (33.999, 46.001), (-22.5996796564404, -22.0003203435596), .UNSPECIFIED.);
#16830 = ADVANCED_FACE ('', (#16770), #16820, .T.);
#16840 = CARTESIAN_POINT ('', (-40., -5.05641137566951, 8.));
#16850 = VERTEX_POINT ('', #16840);
#16860 = CARTESIAN_POINT ('', (-40., -5.05641137566951, 8.));
#16870 = CARTESIAN_POINT ('', (-40., 5.05641137566951, 8.));
#16880 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#16860, #16870), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#16890 = EDGE_CURVE ('', #16850, #5380, #16880, .T.);
#16900 = ORIENTED_EDGE ('', *, *, #16890, .T.);
#16910 = ORIENTED_EDGE ('', *, *, #5490, .T.);
#16920 = CARTESIAN_POINT ('', (-40., -9.464, -9.55084056151965E-15));
#16930 = CARTESIAN_POINT ('', (-40., -9.464, 5.21417734258298));
#16940 = CARTESIAN_POINT ('', (-40., -5.0564113756695, 8.00000000000001));
#16950 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#16920, #16930, #16940), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (540.501523392588, 597.705008211721), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.929947907704163, 0.844629814381118, 1.))
   REPRESENTATION_ITEM ('')
);
#16960 = EDGE_CURVE ('', #5310, #16850, #16950, .T.);
#16970 = ORIENTED_EDGE ('', *, *, #16960, .T.);
#16980 = EDGE_LOOP ('', (#16900, #16910, #16970));
#16990 = FACE_OUTER_BOUND ('', #16980, .T.);
#17000 = CARTESIAN_POINT ('', (-40., -11.0697150801984, 8.00100000000001));
#17010 = CARTESIAN_POINT ('', (-40., -11.0697150801984, -9.465));
#17020 = CARTESIAN_POINT ('', (-40., 11.0697150801985, 8.00100000000001));
#17030 = CARTESIAN_POINT ('', (-40., 11.0697150801985, -9.465));
#17040 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#17000, #17010), (#17020, #17030)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-11.0697150801985, 11.0697150801984), (-8.00100000000001, 9.465), .UNSPECIFIED.);
#17050 = ADVANCED_FACE ('', (#16990), #17040, .T.);
#17060 = ORIENTED_EDGE ('', *, *, #7650, .T.);
#17070 = ORIENTED_EDGE ('', *, *, #15740, .T.);
#17080 = EDGE_LOOP ('', (#17060, #17070));
#17090 = FACE_OUTER_BOUND ('', #17080, .T.);
#17100 = CARTESIAN_POINT ('', (-7., -6.00100000000001, 7.99899999999999));
#17110 = CARTESIAN_POINT ('', (-7., 6.00100000000001, 7.99899999999999));
#17120 = CARTESIAN_POINT ('', (-7., -6.00100000000001, 12.501));
#17130 = CARTESIAN_POINT ('', (-7., 6.00100000000001, 12.501));
#17140 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#17100, #17110), (#17120, #17130)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.501, 2.00100000000001), (-46.001, -33.999), .UNSPECIFIED.);
#17150 = ADVANCED_FACE ('', (#17090), #17140, .T.);
#17160 = ORIENTED_EDGE ('', *, *, #6070, .T.);
#17170 = ORIENTED_EDGE ('', *, *, #5580, .T.);
#17180 = ORIENTED_EDGE ('', *, *, #16890, .F.);
#17190 = CARTESIAN_POINT ('', (-40., -5.05641137566951, 8.));
#17200 = CARTESIAN_POINT ('', (-39.3409810690626, -5.38691990728015, 8.));
#17210 = CARTESIAN_POINT ('', (-38.6727958714194, -5.69937212407403, 8.));
#17220 = CARTESIAN_POINT ('', (-37.9996207671431, -6., 8.));
#17230 = B_SPLINE_CURVE_WITH_KNOTS ('', 3, (#17190, #17200, #17210, #17220), .UNSPECIFIED., .F., .U., (4, 4), (0., 1.), .UNSPECIFIED.);
#17240 = EDGE_CURVE ('', #16850, #9180, #17230, .T.);
#17250 = ORIENTED_EDGE ('', *, *, #17240, .T.);
#17260 = ORIENTED_EDGE ('', *, *, #9220, .T.);
#17270 = CARTESIAN_POINT ('', (-33.4013203435596, -6.00000000000001, 8.));
#17280 = CARTESIAN_POINT ('', (-33.4013203435596, 6.00000000000001, 8.));
#17290 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#17270, #17280), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#17300 = EDGE_CURVE ('', #9090, #6030, #17290, .T.);
#17310 = ORIENTED_EDGE ('', *, *, #17300, .T.);
#17320 = EDGE_LOOP ('', (#17160, #17170, #17180, #17250, #17260, #17310));
#17330 = FACE_OUTER_BOUND ('', #17320, .T.);
#17340 = CARTESIAN_POINT ('', (-33.4003203435596, -6.00100000000001, 8.));
#17350 = CARTESIAN_POINT ('', (-40.001, -6.00100000000001, 8.));
#17360 = CARTESIAN_POINT ('', (-33.4003203435596, 6.00100000000001, 8.));
#17370 = CARTESIAN_POINT ('', (-40.001, 6.00100000000001, 8.));
#17380 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#17340, #17350), (#17360, #17370)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (33.999, 46.001), (-6.5996796564404, 0.000999999999997669), .UNSPECIFIED.);
#17390 = ADVANCED_FACE ('', (#17330), #17380, .T.);
#17400 = ORIENTED_EDGE ('', *, *, #7000, .T.);
#17410 = CARTESIAN_POINT ('', (-19.7, 7.76702224700976, 6.29867965644035));
#17420 = CARTESIAN_POINT ('', (-19.7, -7.76702224700974, 6.29867965644035));
#17430 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#17410, #17420), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#17440 = EDGE_CURVE ('', #6850, #8250, #17430, .T.);
#17450 = ORIENTED_EDGE ('', *, *, #17440, .T.);
#17460 = ORIENTED_EDGE ('', *, *, #8310, .T.);
#17470 = ORIENTED_EDGE ('', *, *, #16740, .F.);
#17480 = EDGE_LOOP ('', (#17400, #17450, #17460, #17470));
#17490 = FACE_OUTER_BOUND ('', #17480, .T.);
#17500 = CARTESIAN_POINT ('', (-19.701, -7.76802224700974, 6.29767965644035));
#17510 = CARTESIAN_POINT ('', (-19.701, 7.76802224700976, 6.29767965644035));
#17520 = CARTESIAN_POINT ('', (-17.9976796564404, -7.76802224700974, 8.00099999999998));
#17530 = CARTESIAN_POINT ('', (-17.9976796564404, 7.76802224700976, 8.00099999999998));
#17540 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#17500, #17510), (#17520, #17530)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.40744451736565, 0.00141421356237537), (-47.7680222470097, -32.2319777529902), .UNSPECIFIED.);
#17550 = ADVANCED_FACE ('', (#17490), #17540, .T.);
#17560 = ORIENTED_EDGE ('', *, *, #6910, .T.);
#17570 = ORIENTED_EDGE ('', *, *, #16540, .F.);
#17580 = ORIENTED_EDGE ('', *, *, #8400, .T.);
#17590 = ORIENTED_EDGE ('', *, *, #17440, .F.);
#17600 = EDGE_LOOP ('', (#17560, #17570, #17580, #17590));
#17610 = FACE_OUTER_BOUND ('', #17600, .T.);
#17620 = CARTESIAN_POINT ('', (-21.4023203435596, -7.76802224700974, 8.001));
#17630 = CARTESIAN_POINT ('', (-21.4023203435596, 7.76802224700976, 8.001));
#17640 = CARTESIAN_POINT ('', (-19.699, -7.76802224700974, 6.29767965644037));
#17650 = CARTESIAN_POINT ('', (-19.699, 7.76802224700976, 6.29767965644037));
#17660 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#17620, #17630), (#17640, #17650)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.40744451736565, 0.00141421356237359), (-47.7680222470097, -32.2319777529902), .UNSPECIFIED.);
#17670 = ADVANCED_FACE ('', (#17610), #17660, .T.);
#17680 = ORIENTED_EDGE ('', *, *, #6750, .T.);
#17690 = CARTESIAN_POINT ('', (-23.7, 7.76702224700976, 6.29867965644035));
#17700 = CARTESIAN_POINT ('', (-23.7, -7.76702224700974, 6.29867965644035));
#17710 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#17690, #17700), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#17720 = EDGE_CURVE ('', #6600, #8500, #17710, .T.);
#17730 = ORIENTED_EDGE ('', *, *, #17720, .T.);
#17740 = ORIENTED_EDGE ('', *, *, #8560, .T.);
#17750 = ORIENTED_EDGE ('', *, *, #16480, .F.);
#17760 = EDGE_LOOP ('', (#17680, #17730, #17740, #17750));
#17770 = FACE_OUTER_BOUND ('', #17760, .T.);
#17780 = CARTESIAN_POINT ('', (-23.701, -7.76802224700974, 6.29767965644035));
#17790 = CARTESIAN_POINT ('', (-23.701, 7.76802224700976, 6.29767965644035));
#17800 = CARTESIAN_POINT ('', (-21.9976796564404, -7.76802224700974, 8.00099999999998));
#17810 = CARTESIAN_POINT ('', (-21.9976796564404, 7.76802224700976, 8.00099999999998));
#17820 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#17780, #17790), (#17800, #17810)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.40744451736565, 0.00141421356237537), (-47.7680222470097, -32.2319777529902), .UNSPECIFIED.);
#17830 = ADVANCED_FACE ('', (#17770), #17820, .T.);
#17840 = ORIENTED_EDGE ('', *, *, #6660, .T.);
#17850 = ORIENTED_EDGE ('', *, *, #16340, .F.);
#17860 = ORIENTED_EDGE ('', *, *, #8650, .T.);
#17870 = ORIENTED_EDGE ('', *, *, #17720, .F.);
#17880 = EDGE_LOOP ('', (#17840, #17850, #17860, #17870));
#17890 = FACE_OUTER_BOUND ('', #17880, .T.);
#17900 = CARTESIAN_POINT ('', (-25.4023203435596, -7.76802224700974, 8.001));
#17910 = CARTESIAN_POINT ('', (-25.4023203435596, 7.76802224700976, 8.001));
#17920 = CARTESIAN_POINT ('', (-23.699, -7.76802224700974, 6.29767965644037));
#17930 = CARTESIAN_POINT ('', (-23.699, 7.76802224700976, 6.29767965644037));
#17940 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#17900, #17910), (#17920, #17930)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.40744451736565, 0.00141421356237359), (-47.7680222470097, -32.2319777529902), .UNSPECIFIED.);
#17950 = ADVANCED_FACE ('', (#17890), #17940, .T.);
#17960 = ORIENTED_EDGE ('', *, *, #6500, .T.);
#17970 = CARTESIAN_POINT ('', (-27.7, 7.76702224700976, 6.29867965644035));
#17980 = CARTESIAN_POINT ('', (-27.7, -7.76702224700974, 6.29867965644035));
#17990 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#17970, #17980), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#18000 = EDGE_CURVE ('', #6350, #8750, #17990, .T.);
#18010 = ORIENTED_EDGE ('', *, *, #18000, .T.);
#18020 = ORIENTED_EDGE ('', *, *, #8810, .T.);
#18030 = ORIENTED_EDGE ('', *, *, #16280, .F.);
#18040 = EDGE_LOOP ('', (#17960, #18010, #18020, #18030));
#18050 = FACE_OUTER_BOUND ('', #18040, .T.);
#18060 = CARTESIAN_POINT ('', (-27.701, -7.76802224700974, 6.29767965644035));
#18070 = CARTESIAN_POINT ('', (-27.701, 7.76802224700976, 6.29767965644035));
#18080 = CARTESIAN_POINT ('', (-25.9976796564404, -7.76802224700974, 8.00099999999998));
#18090 = CARTESIAN_POINT ('', (-25.9976796564404, 7.76802224700976, 8.00099999999998));
#18100 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#18060, #18070), (#18080, #18090)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.40744451736565, 0.00141421356237537), (-47.7680222470097, -32.2319777529902), .UNSPECIFIED.);
#18110 = ADVANCED_FACE ('', (#18050), #18100, .T.);
#18120 = ORIENTED_EDGE ('', *, *, #6410, .T.);
#18130 = ORIENTED_EDGE ('', *, *, #16140, .F.);
#18140 = ORIENTED_EDGE ('', *, *, #8900, .T.);
#18150 = ORIENTED_EDGE ('', *, *, #18000, .F.);
#18160 = EDGE_LOOP ('', (#18120, #18130, #18140, #18150));
#18170 = FACE_OUTER_BOUND ('', #18160, .T.);
#18180 = CARTESIAN_POINT ('', (-29.4023203435596, -7.76802224700974, 8.001));
#18190 = CARTESIAN_POINT ('', (-29.4023203435596, 7.76802224700976, 8.001));
#18200 = CARTESIAN_POINT ('', (-27.699, -7.76802224700974, 6.29767965644037));
#18210 = CARTESIAN_POINT ('', (-27.699, 7.76802224700976, 6.29767965644038));
#18220 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#18180, #18190), (#18200, #18210)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.40744451736565, 0.00141421356237714), (-47.7680222470097, -32.2319777529902), .UNSPECIFIED.);
#18230 = ADVANCED_FACE ('', (#18170), #18220, .T.);
#18240 = ORIENTED_EDGE ('', *, *, #6250, .T.);
#18250 = CARTESIAN_POINT ('', (-31.7, 7.76702224700976, 6.29867965644035));
#18260 = CARTESIAN_POINT ('', (-31.7, -7.76702224700974, 6.29867965644035));
#18270 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#18250, #18260), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#18280 = EDGE_CURVE ('', #6100, #9000, #18270, .T.);
#18290 = ORIENTED_EDGE ('', *, *, #18280, .T.);
#18300 = ORIENTED_EDGE ('', *, *, #9060, .T.);
#18310 = ORIENTED_EDGE ('', *, *, #16080, .F.);
#18320 = EDGE_LOOP ('', (#18240, #18290, #18300, #18310));
#18330 = FACE_OUTER_BOUND ('', #18320, .T.);
#18340 = CARTESIAN_POINT ('', (-31.701, -7.76802224700974, 6.29767965644035));
#18350 = CARTESIAN_POINT ('', (-31.701, 7.76802224700976, 6.29767965644035));
#18360 = CARTESIAN_POINT ('', (-29.9976796564404, -7.76802224700974, 8.00099999999998));
#18370 = CARTESIAN_POINT ('', (-29.9976796564404, 7.76802224700976, 8.00099999999998));
#18380 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#18340, #18350), (#18360, #18370)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.40744451736565, 0.00141421356237359), (-47.7680222470097, -32.2319777529902), .UNSPECIFIED.);
#18390 = ADVANCED_FACE ('', (#18330), #18380, .T.);
#18400 = ORIENTED_EDGE ('', *, *, #6160, .T.);
#18410 = ORIENTED_EDGE ('', *, *, #17300, .F.);
#18420 = ORIENTED_EDGE ('', *, *, #9150, .T.);
#18430 = ORIENTED_EDGE ('', *, *, #18280, .F.);
#18440 = EDGE_LOOP ('', (#18400, #18410, #18420, #18430));
#18450 = FACE_OUTER_BOUND ('', #18440, .T.);
#18460 = CARTESIAN_POINT ('', (-33.4023203435596, -7.76802224700974, 8.001));
#18470 = CARTESIAN_POINT ('', (-33.4023203435596, 7.76802224700976, 8.001));
#18480 = CARTESIAN_POINT ('', (-31.699, -7.76802224700974, 6.29767965644037));
#18490 = CARTESIAN_POINT ('', (-31.699, 7.76802224700976, 6.29767965644038));
#18500 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#18460, #18470), (#18480, #18490)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.40744451736565, 0.00141421356237359), (-47.7680222470097, -32.2319777529902), .UNSPECIFIED.);
#18510 = ADVANCED_FACE ('', (#18450), #18500, .T.);
#18520 = ORIENTED_EDGE ('', *, *, #7250, .T.);
#18530 = CARTESIAN_POINT ('', (-15.7, 7.76702224700976, 6.29867965644035));
#18540 = CARTESIAN_POINT ('', (-15.7, -7.76702224700974, 6.29867965644035));
#18550 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#18530, #18540), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#18560 = EDGE_CURVE ('', #7100, #8000, #18550, .T.);
#18570 = ORIENTED_EDGE ('', *, *, #18560, .T.);
#18580 = ORIENTED_EDGE ('', *, *, #8060, .T.);
#18590 = ORIENTED_EDGE ('', *, *, #15940, .F.);
#18600 = EDGE_LOOP ('', (#18520, #18570, #18580, #18590));
#18610 = FACE_OUTER_BOUND ('', #18600, .T.);
#18620 = CARTESIAN_POINT ('', (-15.701, -7.76802224700974, 6.29767965644035));
#18630 = CARTESIAN_POINT ('', (-15.701, 7.76802224700976, 6.29767965644035));
#18640 = CARTESIAN_POINT ('', (-13.9976796564404, -7.76802224700974, 8.00099999999998));
#18650 = CARTESIAN_POINT ('', (-13.9976796564404, 7.76802224700976, 8.00099999999998));
#18660 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#18620, #18630), (#18640, #18650)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.40744451736565, 0.00141421356237181), (-47.7680222470097, -32.2319777529902), .UNSPECIFIED.);
#18670 = ADVANCED_FACE ('', (#18610), #18660, .T.);
#18680 = ORIENTED_EDGE ('', *, *, #7160, .T.);
#18690 = ORIENTED_EDGE ('', *, *, #16680, .T.);
#18700 = ORIENTED_EDGE ('', *, *, #8150, .T.);
#18710 = ORIENTED_EDGE ('', *, *, #18560, .F.);
#18720 = EDGE_LOOP ('', (#18680, #18690, #18700, #18710));
#18730 = FACE_OUTER_BOUND ('', #18720, .T.);
#18740 = CARTESIAN_POINT ('', (-17.4023203435596, -7.76802224700974, 8.001));
#18750 = CARTESIAN_POINT ('', (-17.4023203435596, 7.76802224700976, 8.001));
#18760 = CARTESIAN_POINT ('', (-15.699, -7.76802224700974, 6.29767965644037));
#18770 = CARTESIAN_POINT ('', (-15.699, 7.76802224700976, 6.29767965644037));
#18780 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#18740, #18750), (#18760, #18770)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.40744451736565, 0.00141421356237004), (-47.7680222470097, -32.2319777529902), .UNSPECIFIED.);
#18790 = ADVANCED_FACE ('', (#18730), #18780, .T.);
#18800 = ORIENTED_EDGE ('', *, *, #7500, .T.);
#18810 = CARTESIAN_POINT ('', (-11.7, 7.76702224700976, 6.29867965644035));
#18820 = CARTESIAN_POINT ('', (-11.7, -7.76702224700974, 6.29867965644035));
#18830 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#18810, #18820), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#18840 = EDGE_CURVE ('', #7350, #7750, #18830, .T.);
#18850 = ORIENTED_EDGE ('', *, *, #18840, .T.);
#18860 = ORIENTED_EDGE ('', *, *, #7810, .T.);
#18870 = ORIENTED_EDGE ('', *, *, #15680, .F.);
#18880 = EDGE_LOOP ('', (#18800, #18850, #18860, #18870));
#18890 = FACE_OUTER_BOUND ('', #18880, .T.);
#18900 = CARTESIAN_POINT ('', (-11.701, -7.76802224700974, 6.29767965644035));
#18910 = CARTESIAN_POINT ('', (-11.701, 7.76802224700976, 6.29767965644035));
#18920 = CARTESIAN_POINT ('', (-9.99767965644036, -7.76802224700974, 8.001));
#18930 = CARTESIAN_POINT ('', (-9.99767965644036, 7.76802224700976, 8.001));
#18940 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#18900, #18910), (#18920, #18930)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.40744451736567, 0.00141421356237359), (-47.7680222470097, -32.2319777529902), .UNSPECIFIED.);
#18950 = ADVANCED_FACE ('', (#18890), #18940, .T.);
#18960 = ORIENTED_EDGE ('', *, *, #7410, .T.);
#18970 = ORIENTED_EDGE ('', *, *, #15880, .T.);
#18980 = ORIENTED_EDGE ('', *, *, #7900, .T.);
#18990 = ORIENTED_EDGE ('', *, *, #18840, .F.);
#19000 = EDGE_LOOP ('', (#18960, #18970, #18980, #18990));
#19010 = FACE_OUTER_BOUND ('', #19000, .T.);
#19020 = CARTESIAN_POINT ('', (-13.4023203435596, -7.76802224700974, 8.001));
#19030 = CARTESIAN_POINT ('', (-13.4023203435596, 7.76802224700976, 8.001));
#19040 = CARTESIAN_POINT ('', (-11.699, -7.76802224700974, 6.29767965644037));
#19050 = CARTESIAN_POINT ('', (-11.699, 7.76802224700976, 6.29767965644037));
#19060 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#19020, #19030), (#19040, #19050)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.40744451736565, 0.00141421356237181), (-47.7680222470097, -32.2319777529902), .UNSPECIFIED.);
#19070 = ADVANCED_FACE ('', (#19010), #19060, .T.);
#19080 = ORIENTED_EDGE ('', *, *, #14280, .T.);
#19090 = ORIENTED_EDGE ('', *, *, #15040, .T.);
#19100 = ORIENTED_EDGE ('', *, *, #12520, .F.);
#19110 = ORIENTED_EDGE ('', *, *, #10430, .F.);
#19120 = EDGE_LOOP ('', (#19080, #19090, #19100, #19110));
#19130 = FACE_OUTER_BOUND ('', #19120, .T.);
#19140 = CARTESIAN_POINT ('', (30.001, 30.001, -30.));
#19150 = CARTESIAN_POINT ('', (12.1233556529823, 30.001, -30.));
#19160 = CARTESIAN_POINT ('', (30.001, 16.0515588832576, -30.));
#19170 = CARTESIAN_POINT ('', (12.1233556529823, 16.0515588832576, -30.));
#19180 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#19140, #19150), (#19160, #19170)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-13.9484411167424, 0.00100000000000122), (-0.00100000000000122, 17.8766443470177), .UNSPECIFIED.);
#19190 = ADVANCED_FACE ('', (#19130), #19180, .T.);
#19200 = ORIENTED_EDGE ('', *, *, #11410, .T.);
#19210 = ORIENTED_EDGE ('', *, *, #2340, .T.);
#19220 = ORIENTED_EDGE ('', *, *, #11960, .T.);
#19230 = CARTESIAN_POINT ('', (16., 30., -16.3));
#19240 = CARTESIAN_POINT ('', (16., -25., -16.3));
#19250 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#19230, #19240), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#19260 = EDGE_CURVE ('', #12760, #11870, #19250, .T.);
#19270 = ORIENTED_EDGE ('', *, *, #19260, .F.);
#19280 = ORIENTED_EDGE ('', *, *, #12800, .T.);
#19290 = ORIENTED_EDGE ('', *, *, #13250, .T.);
#19300 = EDGE_LOOP ('', (#19200, #19210, #19220, #19270, #19280, #19290));
#19310 = FACE_OUTER_BOUND ('', #19300, .T.);
#19320 = CARTESIAN_POINT ('', (16., 30.001, 6.00100000000001));
#19330 = CARTESIAN_POINT ('', (16., 30.001, -16.301));
#19340 = CARTESIAN_POINT ('', (16., -25.001, 6.001));
#19350 = CARTESIAN_POINT ('', (16., -25.001, -16.301));
#19360 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#19320, #19330), (#19340, #19350)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00100000000000122, 55.001), (-0.00100000000000033, 22.301), .UNSPECIFIED.);
#19370 = ADVANCED_FACE ('', (#19310), #19360, .T.);
#19380 = ORIENTED_EDGE ('', *, *, #11770, .F.);
#19390 = ORIENTED_EDGE ('', *, *, #10760, .T.);
#19400 = ORIENTED_EDGE ('', *, *, #12430, .T.);
#19410 = CARTESIAN_POINT ('', (18., 30., -16.));
#19420 = CARTESIAN_POINT ('', (18., -25., -16.));
#19430 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#19410, #19420), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#19440 = EDGE_CURVE ('', #12390, #11730, #19430, .T.);
#19450 = ORIENTED_EDGE ('', *, *, #19440, .T.);
#19460 = EDGE_LOOP ('', (#19380, #19390, #19400, #19450));
#19470 = FACE_OUTER_BOUND ('', #19460, .T.);
#19480 = ORIENTED_EDGE ('', *, *, #9880, .T.);
#19490 = EDGE_LOOP ('', (#19480));
#19500 = FACE_BOUND ('', #19490, .T.);
#19510 = CARTESIAN_POINT ('', (29.501, -25.001, -16.));
#19520 = CARTESIAN_POINT ('', (17.999, -25.001, -16.));
#19530 = CARTESIAN_POINT ('', (29.501, 30.001, -16.));
#19540 = CARTESIAN_POINT ('', (17.999, 30.001, -16.));
#19550 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#19510, #19520), (#19530, #19540)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-55.001, 0.00100000000000122), (59.7358128784795, 71.2378128784795), .UNSPECIFIED.);
#19560 = ADVANCED_FACE ('', (#19470, #19500), #19550, .T.);
#19570 = ORIENTED_EDGE ('', *, *, #15180, .T.);
#19580 = ORIENTED_EDGE ('', *, *, #4890, .F.);
#19590 = ORIENTED_EDGE ('', *, *, #15440, .F.);
#19600 = ORIENTED_EDGE ('', *, *, #11280, .T.);
#19610 = EDGE_LOOP ('', (#19570, #19580, #19590, #19600));
#19620 = FACE_OUTER_BOUND ('', #19610, .T.);
#19630 = CARTESIAN_POINT ('', (30.001, 17.2465330419665, 19.4238056564166));
#19640 = CARTESIAN_POINT ('', (23.499, 17.2465330419665, 19.4238056564166));
#19650 = CARTESIAN_POINT ('', (30.001, 23.0007988362387, 11.2058624320625));
#19660 = CARTESIAN_POINT ('', (23.499, 23.0007988362387, 11.2058624320625));
#19670 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#19630, #19640), (#19650, #19660)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00139272848063854, 10.0308635316953), (-0.00100000000000122, 6.501), .UNSPECIFIED.);
#19680 = ADVANCED_FACE ('', (#19620), #19670, .T.);
#19690 = ORIENTED_EDGE ('', *, *, #15240, .T.);
#19700 = ORIENTED_EDGE ('', *, *, #11140, .F.);
#19710 = ORIENTED_EDGE ('', *, *, #15500, .F.);
#19720 = ORIENTED_EDGE ('', *, *, #5040, .T.);
#19730 = EDGE_LOOP ('', (#19690, #19700, #19710, #19720));
#19740 = FACE_OUTER_BOUND ('', #19730, .T.);
#19750 = CARTESIAN_POINT ('', (30.001, 23.001000017453, 23.7499388964415));
#19760 = CARTESIAN_POINT ('', (23.499, 23.001000017453, 23.7499388964415));
#19770 = CARTESIAN_POINT ('', (30.001, 19.4990479791014, 23.7500000170348));
#19780 = CARTESIAN_POINT ('', (23.499, 19.4990479791014, 23.7500000170348));
#19790 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#19750, #19760), (#19770, #19780)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00100001745314415, 3.50095202143181), (-0.00100000000000122, 6.501), .UNSPECIFIED.);
#19800 = ADVANCED_FACE ('', (#19740), #19790, .T.);
#19810 = ORIENTED_EDGE ('', *, *, #13140, .T.);
#19820 = CARTESIAN_POINT ('', (0.3, 24.9198715887542, -2.));
#19830 = CARTESIAN_POINT ('', (0.3, 23.6853126013869, -17.3825257169682));
#19840 = CARTESIAN_POINT ('', (0.3, 9.38096830210952, -23.1732050807569));
#19850 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#19820, #19830, #19840), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (184.588565735786, 247.960931297313), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.850937805308123, 1.))
   REPRESENTATION_ITEM ('')
);
#19860 = EDGE_CURVE ('', #13030, #14870, #19850, .T.);
#19870 = ORIENTED_EDGE ('', *, *, #19860, .T.);
#19880 = ORIENTED_EDGE ('', *, *, #14930, .T.);
#19890 = ORIENTED_EDGE ('', *, *, #14580, .F.);
#19900 = EDGE_LOOP ('', (#19810, #19870, #19880, #19890));
#19910 = FACE_OUTER_BOUND ('', #19900, .T.);
#19920 = CARTESIAN_POINT ('', (0.3312, 25., 4.59242549680257E-15));
#19930 = CARTESIAN_POINT ('', (-0.0312000000000001, 25., 4.59242549680257E-15));
#19940 = CARTESIAN_POINT ('', (0.3312, 25., -25.));
#19950 = CARTESIAN_POINT ('', (-0.0312000000000001, 25., -25.));
#19960 = CARTESIAN_POINT ('', (0.3312, 1.01200368843873E-14, -25.));
#19970 = CARTESIAN_POINT ('', (-0.0312, 1.01192321947391E-14, -25.));
#19980 = CARTESIAN_POINT ('', (0.3312, -25., -25.));
#19990 = CARTESIAN_POINT ('', (-0.0312, -25., -25.));
#20000 = CARTESIAN_POINT ('', (0.3312, -25., -1.65358266916722E-14));
#20010 = CARTESIAN_POINT ('', (-0.0312, -25., -1.65358266916722E-14));
#20020 = CARTESIAN_POINT ('', (0.3312, -25., 25.));
#20030 = CARTESIAN_POINT ('', (-0.0312, -25., 25.));
#20040 = CARTESIAN_POINT ('', (0.3312, -1.40698323019558E-14, 25.));
#20050 = CARTESIAN_POINT ('', (-0.0312, -1.40706369916041E-14, 25.));
#20060 = CARTESIAN_POINT ('', (0.3312, 25., 25.));
#20070 = CARTESIAN_POINT ('', (-0.0312000000000001, 25., 25.));
#20080 = CARTESIAN_POINT ('', (0.3312, 25., 4.59242549680257E-15));
#20090 = CARTESIAN_POINT ('', (-0.0312000000000001, 25., 4.59242549680257E-15));
#20100 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#19920, #19930), (#19940, #19950), (#19960, #19970), (#19980, #19990), (#20000, #20010), (#20020, #20030), (#20040, #20050), (#20060, #20070), (#20080, #20090)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#20110 = ADVANCED_FACE ('', (#19910), #20100, .T.);
#20120 = ORIENTED_EDGE ('', *, *, #13070, .T.);
#20130 = ORIENTED_EDGE ('', *, *, #12660, .T.);
#20140 = ORIENTED_EDGE ('', *, *, #14980, .T.);
#20150 = ORIENTED_EDGE ('', *, *, #19860, .F.);
#20160 = EDGE_LOOP ('', (#20120, #20130, #20140, #20150));
#20170 = FACE_OUTER_BOUND ('', #20160, .T.);
#20180 = CARTESIAN_POINT ('', (0.3, 9.37996830210951, -1.999));
#20190 = CARTESIAN_POINT ('', (0.3, 9.37996830210952, -23.1742050807569));
#20200 = CARTESIAN_POINT ('', (0.3, 30.001, -1.99899999999999));
#20210 = CARTESIAN_POINT ('', (0.3, 30.001, -23.1742050807569));
#20220 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#20180, #20190), (#20200, #20210)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (9.37996830210951, 30.001), (1.999, 23.1742050807569), .UNSPECIFIED.);
#20230 = ADVANCED_FACE ('', (#20170), #20220, .T.);
#20240 = ORIENTED_EDGE ('', *, *, #12230, .T.);
#20250 = ORIENTED_EDGE ('', *, *, #4160, .F.);
#20260 = ORIENTED_EDGE ('', *, *, #14820, .T.);
#20270 = ORIENTED_EDGE ('', *, *, #14160, .T.);
#20280 = EDGE_LOOP ('', (#20240, #20250, #20260, #20270));
#20290 = FACE_OUTER_BOUND ('', #20280, .T.);
#20300 = CARTESIAN_POINT ('', (0.3, -25.001, 0.000999999999995407));
#20310 = CARTESIAN_POINT ('', (0.3, -25.001, -23.1742050807569));
#20320 = CARTESIAN_POINT ('', (0.3, -9.37996830210948, 0.000999999999998277));
#20330 = CARTESIAN_POINT ('', (0.3, -9.37996830210948, -23.1742050807569));
#20340 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#20300, #20310), (#20320, #20330)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-25.001, -9.37996830210948), (-0.001, 23.1742050807569), .UNSPECIFIED.);
#20350 = ADVANCED_FACE ('', (#20290), #20340, .T.);
#20360 = ORIENTED_EDGE ('', *, *, #14000, .T.);
#20370 = ORIENTED_EDGE ('', *, *, #4240, .F.);
#20380 = ORIENTED_EDGE ('', *, *, #12160, .T.);
#20390 = EDGE_LOOP ('', (#20360, #20370, #20380));
#20400 = FACE_OUTER_BOUND ('', #20390, .T.);
#20410 = CARTESIAN_POINT ('', (0.3, -25.001, 23.2097904921098));
#20420 = CARTESIAN_POINT ('', (0.3, -25.001, -0.00100000000000459));
#20430 = CARTESIAN_POINT ('', (0.3, -9.29158004503343, 23.2097904921098));
#20440 = CARTESIAN_POINT ('', (0.3, -9.29158004503343, -0.00100000000000171));
#20450 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#20410, #20420), (#20430, #20440)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-25.001, -9.29158004503343), (-23.2097904921098, 0.001), .UNSPECIFIED.);
#20460 = ADVANCED_FACE ('', (#20400), #20450, .T.);
#20470 = ORIENTED_EDGE ('', *, *, #10930, .T.);
#20480 = CARTESIAN_POINT ('', (0.3, -6.12323399573677E-15, 25.));
#20490 = CARTESIAN_POINT ('', (0.3, 16.5239576400731, 25.));
#20500 = CARTESIAN_POINT ('', (0.3, 23., 9.79795897113273));
#20510 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#20480, #20490, #20500), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (90., 156.926081934369), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.83424167926486, 1.))
   REPRESENTATION_ITEM ('')
);
#20520 = EDGE_CURVE ('', #13390, #10890, #20510, .T.);
#20530 = ORIENTED_EDGE ('', *, *, #20520, .F.);
#20540 = ORIENTED_EDGE ('', *, *, #13610, .T.);
#20550 = EDGE_LOOP ('', (#20470, #20530, #20540));
#20560 = FACE_OUTER_BOUND ('', #20550, .T.);
#20570 = CARTESIAN_POINT ('', (0.3, -0.00100000000000612, 25.001));
#20580 = CARTESIAN_POINT ('', (0.3, -0.00100000000000333, 9.79695897113272));
#20590 = CARTESIAN_POINT ('', (0.3, 23.001, 25.001));
#20600 = CARTESIAN_POINT ('', (0.3, 23.001, 9.79695897113272));
#20610 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#20570, #20580), (#20590, #20600)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00100000000000153, 23.001), (-25.001, -9.79695897113272), .UNSPECIFIED.);
#20620 = ADVANCED_FACE ('', (#20560), #20610, .T.);
#20630 = ORIENTED_EDGE ('', *, *, #13430, .T.);
#20640 = CARTESIAN_POINT ('', (0.3, -3.55678486035566, 24.7456921797945));
#20650 = CARTESIAN_POINT ('', (0.3, -1.78748385262207, 25.));
#20660 = CARTESIAN_POINT ('', (0.3, -6.12323399573677E-15, 25.));
#20670 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#20640, #20650, #20660), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (81.8206965565088, 90.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.997453679924983, 1.))
   REPRESENTATION_ITEM ('')
);
#20680 = EDGE_CURVE ('', #13780, #13390, #20670, .T.);
#20690 = ORIENTED_EDGE ('', *, *, #20680, .F.);
#20700 = ORIENTED_EDGE ('', *, *, #13820, .T.);
#20710 = EDGE_LOOP ('', (#20630, #20690, #20700));
#20720 = FACE_OUTER_BOUND ('', #20710, .T.);
#20730 = CARTESIAN_POINT ('', (0.3, -3.55778486035566, 25.001));
#20740 = CARTESIAN_POINT ('', (0.3, -3.55778486035566, 24.7446921797945));
#20750 = CARTESIAN_POINT ('', (0.3, 0.000999999999995407, 25.001));
#20760 = CARTESIAN_POINT ('', (0.3, 0.000999999999995454, 24.7446921797945));
#20770 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#20730, #20740), (#20750, #20760)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-3.55778486035566, 0.001), (-25.001, -24.7446921797945), .UNSPECIFIED.);
#20780 = ADVANCED_FACE ('', (#20720), #20770, .T.);
#20790 = ORIENTED_EDGE ('', *, *, #11600, .T.);
#20800 = ORIENTED_EDGE ('', *, *, #14480, .F.);
#20810 = ORIENTED_EDGE ('', *, *, #13890, .T.);
#20820 = ORIENTED_EDGE ('', *, *, #20680, .T.);
#20830 = ORIENTED_EDGE ('', *, *, #20520, .T.);
#20840 = EDGE_LOOP ('', (#20790, #20800, #20810, #20820, #20830));
#20850 = FACE_OUTER_BOUND ('', #20840, .T.);
#20860 = CARTESIAN_POINT ('', (0.3312, 25., 4.59242549680257E-15));
#20870 = CARTESIAN_POINT ('', (-0.0312000000000001, 25., 4.59242549680257E-15));
#20880 = CARTESIAN_POINT ('', (0.3312, 25., -25.));
#20890 = CARTESIAN_POINT ('', (-0.0312000000000001, 25., -25.));
#20900 = CARTESIAN_POINT ('', (0.3312, 1.01200368843873E-14, -25.));
#20910 = CARTESIAN_POINT ('', (-0.0312, 1.01192321947391E-14, -25.));
#20920 = CARTESIAN_POINT ('', (0.3312, -25., -25.));
#20930 = CARTESIAN_POINT ('', (-0.0312, -25., -25.));
#20940 = CARTESIAN_POINT ('', (0.3312, -25., -1.65358266916722E-14));
#20950 = CARTESIAN_POINT ('', (-0.0312, -25., -1.65358266916722E-14));
#20960 = CARTESIAN_POINT ('', (0.3312, -25., 25.));
#20970 = CARTESIAN_POINT ('', (-0.0312, -25., 25.));
#20980 = CARTESIAN_POINT ('', (0.3312, -1.40698323019558E-14, 25.));
#20990 = CARTESIAN_POINT ('', (-0.0312, -1.40706369916041E-14, 25.));
#21000 = CARTESIAN_POINT ('', (0.3312, 25., 25.));
#21010 = CARTESIAN_POINT ('', (-0.0312000000000001, 25., 25.));
#21020 = CARTESIAN_POINT ('', (0.3312, 25., 4.59242549680257E-15));
#21030 = CARTESIAN_POINT ('', (-0.0312000000000001, 25., 4.59242549680257E-15));
#21040 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#20860, #20870), (#20880, #20890), (#20900, #20910), (#20920, #20930), (#20940, #20950), (#20960, #20970), (#20980, #20990), (#21000, #21010), (#21020, #21030)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#21050 = ADVANCED_FACE ('', (#20850), #21040, .T.);
#21060 = ORIENTED_EDGE ('', *, *, #12870, .T.);
#21070 = ORIENTED_EDGE ('', *, *, #19260, .T.);
#21080 = ORIENTED_EDGE ('', *, *, #11910, .T.);
#21090 = CARTESIAN_POINT ('', (18., 30., -16.3));
#21100 = CARTESIAN_POINT ('', (18., -25., -16.3));
#21110 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#21090, #21100), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#21120 = EDGE_CURVE ('', #12830, #11800, #21110, .T.);
#21130 = ORIENTED_EDGE ('', *, *, #21120, .F.);
#21140 = EDGE_LOOP ('', (#21060, #21070, #21080, #21130));
#21150 = FACE_OUTER_BOUND ('', #21140, .T.);
#21160 = CARTESIAN_POINT ('', (18.001, -25.001, -16.3));
#21170 = CARTESIAN_POINT ('', (15.999, -25.001, -16.3));
#21180 = CARTESIAN_POINT ('', (18.001, 30.001, -16.3));
#21190 = CARTESIAN_POINT ('', (15.999, 30.001, -16.3));
#21200 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#21160, #21170), (#21180, #21190)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (2.0213748416157, 57.0233748416157), (-0.00100000000000122, 2.001), .UNSPECIFIED.);
#21210 = ADVANCED_FACE ('', (#21150), #21200, .T.);
#21220 = ORIENTED_EDGE ('', *, *, #12920, .T.);
#21230 = ORIENTED_EDGE ('', *, *, #21120, .T.);
#21240 = ORIENTED_EDGE ('', *, *, #11840, .T.);
#21250 = ORIENTED_EDGE ('', *, *, #19440, .F.);
#21260 = EDGE_LOOP ('', (#21220, #21230, #21240, #21250));
#21270 = FACE_OUTER_BOUND ('', #21260, .T.);
#21280 = CARTESIAN_POINT ('', (18., -25.001, -15.999));
#21290 = CARTESIAN_POINT ('', (18., -25.001, -16.301));
#21300 = CARTESIAN_POINT ('', (18., 30.001, -15.999));
#21310 = CARTESIAN_POINT ('', (18., 30.001, -16.301));
#21320 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#21280, #21290), (#21300, #21310)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (2.0213748416157, 57.0233748416157), (-0.301, 0.00100000000000122), .UNSPECIFIED.);
#21330 = ADVANCED_FACE ('', (#21270), #21320, .T.);
#21340 = ORIENTED_EDGE ('', *, *, #3670, .T.);
#21350 = ORIENTED_EDGE ('', *, *, #3590, .T.);
#21360 = EDGE_LOOP ('', (#21340, #21350));
#21370 = FACE_OUTER_BOUND ('', #21360, .T.);
#21380 = ORIENTED_EDGE ('', *, *, #3180, .F.);
#21390 = ORIENTED_EDGE ('', *, *, #3100, .F.);
#21400 = EDGE_LOOP ('', (#21380, #21390));
#21410 = FACE_BOUND ('', #21400, .T.);
#21420 = CARTESIAN_POINT ('', (25.601, 12.101, -27.5));
#21430 = CARTESIAN_POINT ('', (20.399, 12.101, -27.5));
#21440 = CARTESIAN_POINT ('', (25.601, 6.89900000000002, -27.5));
#21450 = CARTESIAN_POINT ('', (20.399, 6.89900000000002, -27.5));
#21460 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#21420, #21430), (#21440, #21450)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.601, 2.601), (-2.601, 2.601), .UNSPECIFIED.);
#21470 = ADVANCED_FACE ('', (#21370, #21410), #21460, .T.);
#21480 = CARTESIAN_POINT ('', (16.25, -24.2, 1.29999999999999));
#21490 = VERTEX_POINT ('', #21480);
#21500 = CARTESIAN_POINT ('', (16.25, -24.2, 5.69999999999999));
#21510 = VERTEX_POINT ('', #21500);
#21520 = CARTESIAN_POINT ('', (16.25, -24.2, 1.29999999999999));
#21530 = CARTESIAN_POINT ('', (16.25, -24.2, 5.69999999999999));
#21540 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#21520, #21530), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#21550 = EDGE_CURVE ('', #21490, #21510, #21540, .T.);
#21560 = ORIENTED_EDGE ('', *, *, #21550, .T.);
#21570 = CARTESIAN_POINT ('', (16.25, 22.2, 5.7));
#21580 = VERTEX_POINT ('', #21570);
#21590 = CARTESIAN_POINT ('', (16.25, -24.2, 5.69999999999999));
#21600 = CARTESIAN_POINT ('', (16.25, 22.2, 5.7));
#21610 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#21590, #21600), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#21620 = EDGE_CURVE ('', #21510, #21580, #21610, .T.);
#21630 = ORIENTED_EDGE ('', *, *, #21620, .T.);
#21640 = CARTESIAN_POINT ('', (16.25, 22.2, 1.29999999999999));
#21650 = VERTEX_POINT ('', #21640);
#21660 = CARTESIAN_POINT ('', (16.25, 22.2, 5.7));
#21670 = CARTESIAN_POINT ('', (16.25, 22.2, 1.29999999999999));
#21680 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#21660, #21670), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#21690 = EDGE_CURVE ('', #21580, #21650, #21680, .T.);
#21700 = ORIENTED_EDGE ('', *, *, #21690, .T.);
#21710 = CARTESIAN_POINT ('', (16.25, 22.2, 1.29999999999999));
#21720 = CARTESIAN_POINT ('', (16.25, -24.2, 1.29999999999999));
#21730 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#21710, #21720), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#21740 = EDGE_CURVE ('', #21650, #21490, #21730, .T.);
#21750 = ORIENTED_EDGE ('', *, *, #21740, .T.);
#21760 = EDGE_LOOP ('', (#21560, #21630, #21700, #21750));
#21770 = FACE_OUTER_BOUND ('', #21760, .T.);
#21780 = CARTESIAN_POINT ('', (16.25, -24.201, 1.29899999999999));
#21790 = CARTESIAN_POINT ('', (16.25, 22.201, 1.29899999999999));
#21800 = CARTESIAN_POINT ('', (16.25, -24.201, 5.70099999999999));
#21810 = CARTESIAN_POINT ('', (16.25, 22.201, 5.701));
#21820 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#21780, #21790), (#21800, #21810)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-4.701, -0.298999999999998), (-46.701, -0.298999999999999), .UNSPECIFIED.);
#21830 = ADVANCED_FACE ('', (#21770), #21820, .T.);
#21840 = CARTESIAN_POINT ('', (16.55, 22.5, 1.29999999999999));
#21850 = VERTEX_POINT ('', #21840);
#21860 = CARTESIAN_POINT ('', (16.55, 22.5, 5.7));
#21870 = VERTEX_POINT ('', #21860);
#21880 = CARTESIAN_POINT ('', (16.55, 22.5, 1.29999999999999));
#21890 = CARTESIAN_POINT ('', (16.55, 22.5, 5.7));
#21900 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#21880, #21890), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#21910 = EDGE_CURVE ('', #21850, #21870, #21900, .T.);
#21920 = ORIENTED_EDGE ('', *, *, #21910, .T.);
#21930 = CARTESIAN_POINT ('', (29.45, 22.5, 5.7));
#21940 = VERTEX_POINT ('', #21930);
#21950 = CARTESIAN_POINT ('', (16.55, 22.5, 5.7));
#21960 = CARTESIAN_POINT ('', (29.45, 22.5, 5.7));
#21970 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#21950, #21960), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#21980 = EDGE_CURVE ('', #21870, #21940, #21970, .T.);
#21990 = ORIENTED_EDGE ('', *, *, #21980, .T.);
#22000 = CARTESIAN_POINT ('', (29.45, 22.5, 1.29999999999999));
#22010 = VERTEX_POINT ('', #22000);
#22020 = CARTESIAN_POINT ('', (29.45, 22.5, 5.7));
#22030 = CARTESIAN_POINT ('', (29.45, 22.5, 1.29999999999999));
#22040 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#22020, #22030), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#22050 = EDGE_CURVE ('', #21940, #22010, #22040, .T.);
#22060 = ORIENTED_EDGE ('', *, *, #22050, .T.);
#22070 = CARTESIAN_POINT ('', (29.45, 22.5, 1.29999999999999));
#22080 = CARTESIAN_POINT ('', (16.55, 22.5, 1.29999999999999));
#22090 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#22070, #22080), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#22100 = EDGE_CURVE ('', #22010, #21850, #22090, .T.);
#22110 = ORIENTED_EDGE ('', *, *, #22100, .T.);
#22120 = EDGE_LOOP ('', (#21920, #21990, #22060, #22110));
#22130 = FACE_OUTER_BOUND ('', #22120, .T.);
#22140 = CARTESIAN_POINT ('', (29.451, 22.5, 5.701));
#22150 = CARTESIAN_POINT ('', (16.549, 22.5, 5.701));
#22160 = CARTESIAN_POINT ('', (29.451, 22.5, 1.29899999999999));
#22170 = CARTESIAN_POINT ('', (16.549, 22.5, 1.29899999999999));
#22180 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#22140, #22150), (#22160, #22170)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.298999999999998, 4.701), (-13.201, -0.298999999999999), .UNSPECIFIED.);
#22190 = ADVANCED_FACE ('', (#22130), #22180, .T.);
#22200 = CARTESIAN_POINT ('', (29.75, 22.2, 1.29999999999999));
#22210 = VERTEX_POINT ('', #22200);
#22220 = CARTESIAN_POINT ('', (29.75, 22.2, 5.7));
#22230 = VERTEX_POINT ('', #22220);
#22240 = CARTESIAN_POINT ('', (29.75, 22.2, 1.29999999999999));
#22250 = CARTESIAN_POINT ('', (29.75, 22.2, 5.7));
#22260 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#22240, #22250), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#22270 = EDGE_CURVE ('', #22210, #22230, #22260, .T.);
#22280 = ORIENTED_EDGE ('', *, *, #22270, .T.);
#22290 = CARTESIAN_POINT ('', (29.75, -24.2, 5.69999999999999));
#22300 = VERTEX_POINT ('', #22290);
#22310 = CARTESIAN_POINT ('', (29.75, 22.2, 5.7));
#22320 = CARTESIAN_POINT ('', (29.75, -24.2, 5.69999999999999));
#22330 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#22310, #22320), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#22340 = EDGE_CURVE ('', #22230, #22300, #22330, .T.);
#22350 = ORIENTED_EDGE ('', *, *, #22340, .T.);
#22360 = CARTESIAN_POINT ('', (29.75, -24.2, 1.29999999999999));
#22370 = VERTEX_POINT ('', #22360);
#22380 = CARTESIAN_POINT ('', (29.75, -24.2, 5.69999999999999));
#22390 = CARTESIAN_POINT ('', (29.75, -24.2, 1.29999999999999));
#22400 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#22380, #22390), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#22410 = EDGE_CURVE ('', #22300, #22370, #22400, .T.);
#22420 = ORIENTED_EDGE ('', *, *, #22410, .T.);
#22430 = CARTESIAN_POINT ('', (29.75, -24.2, 1.29999999999999));
#22440 = CARTESIAN_POINT ('', (29.75, 22.2, 1.29999999999999));
#22450 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#22430, #22440), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#22460 = EDGE_CURVE ('', #22370, #22210, #22450, .T.);
#22470 = ORIENTED_EDGE ('', *, *, #22460, .T.);
#22480 = EDGE_LOOP ('', (#22280, #22350, #22420, #22470));
#22490 = FACE_OUTER_BOUND ('', #22480, .T.);
#22500 = CARTESIAN_POINT ('', (29.75, -24.201, 5.70099999999999));
#22510 = CARTESIAN_POINT ('', (29.75, 22.201, 5.701));
#22520 = CARTESIAN_POINT ('', (29.75, -24.201, 1.29899999999999));
#22530 = CARTESIAN_POINT ('', (29.75, 22.201, 1.29899999999999));
#22540 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#22500, #22510), (#22520, #22530)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.298999999999998, 4.701), (-46.701, -0.298999999999999), .UNSPECIFIED.);
#22550 = ADVANCED_FACE ('', (#22490), #22540, .T.);
#22560 = CARTESIAN_POINT ('', (29.45, -24.5, 1.29999999999999));
#22570 = VERTEX_POINT ('', #22560);
#22580 = CARTESIAN_POINT ('', (29.45, -24.5, 5.69999999999999));
#22590 = VERTEX_POINT ('', #22580);
#22600 = CARTESIAN_POINT ('', (29.45, -24.5, 1.29999999999999));
#22610 = CARTESIAN_POINT ('', (29.45, -24.5, 5.69999999999999));
#22620 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#22600, #22610), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#22630 = EDGE_CURVE ('', #22570, #22590, #22620, .T.);
#22640 = ORIENTED_EDGE ('', *, *, #22630, .T.);
#22650 = CARTESIAN_POINT ('', (16.55, -24.5, 5.69999999999999));
#22660 = VERTEX_POINT ('', #22650);
#22670 = CARTESIAN_POINT ('', (29.45, -24.5, 5.69999999999999));
#22680 = CARTESIAN_POINT ('', (16.55, -24.5, 5.69999999999999));
#22690 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#22670, #22680), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#22700 = EDGE_CURVE ('', #22590, #22660, #22690, .T.);
#22710 = ORIENTED_EDGE ('', *, *, #22700, .T.);
#22720 = CARTESIAN_POINT ('', (16.55, -24.5, 1.29999999999999));
#22730 = VERTEX_POINT ('', #22720);
#22740 = CARTESIAN_POINT ('', (16.55, -24.5, 5.69999999999999));
#22750 = CARTESIAN_POINT ('', (16.55, -24.5, 1.29999999999999));
#22760 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#22740, #22750), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#22770 = EDGE_CURVE ('', #22660, #22730, #22760, .T.);
#22780 = ORIENTED_EDGE ('', *, *, #22770, .T.);
#22790 = CARTESIAN_POINT ('', (16.55, -24.5, 1.29999999999999));
#22800 = CARTESIAN_POINT ('', (29.45, -24.5, 1.29999999999999));
#22810 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#22790, #22800), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#22820 = EDGE_CURVE ('', #22730, #22570, #22810, .T.);
#22830 = ORIENTED_EDGE ('', *, *, #22820, .T.);
#22840 = EDGE_LOOP ('', (#22640, #22710, #22780, #22830));
#22850 = FACE_OUTER_BOUND ('', #22840, .T.);
#22860 = CARTESIAN_POINT ('', (29.451, -24.5, 1.29899999999999));
#22870 = CARTESIAN_POINT ('', (16.549, -24.5, 1.29899999999999));
#22880 = CARTESIAN_POINT ('', (29.451, -24.5, 5.70099999999999));
#22890 = CARTESIAN_POINT ('', (16.549, -24.5, 5.70099999999999));
#22900 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#22860, #22870), (#22880, #22890)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-4.701, -0.298999999999998), (-13.201, -0.298999999999999), .UNSPECIFIED.);
#22910 = ADVANCED_FACE ('', (#22850), #22900, .T.);
#22920 = CARTESIAN_POINT ('', (16.55, -24.2, 0.999999999999988));
#22930 = VERTEX_POINT ('', #22920);
#22940 = CARTESIAN_POINT ('', (16.55, 22.2, 0.999999999999996));
#22950 = VERTEX_POINT ('', #22940);
#22960 = CARTESIAN_POINT ('', (16.55, -24.2, 0.999999999999988));
#22970 = CARTESIAN_POINT ('', (16.55, 22.2, 0.999999999999996));
#22980 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#22960, #22970), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#22990 = EDGE_CURVE ('', #22930, #22950, #22980, .T.);
#23000 = ORIENTED_EDGE ('', *, *, #22990, .T.);
#23010 = CARTESIAN_POINT ('', (29.45, 22.2, 0.999999999999996));
#23020 = VERTEX_POINT ('', #23010);
#23030 = CARTESIAN_POINT ('', (16.55, 22.2, 0.999999999999996));
#23040 = CARTESIAN_POINT ('', (29.45, 22.2, 0.999999999999996));
#23050 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#23030, #23040), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#23060 = EDGE_CURVE ('', #22950, #23020, #23050, .T.);
#23070 = ORIENTED_EDGE ('', *, *, #23060, .T.);
#23080 = CARTESIAN_POINT ('', (29.45, -24.2, 0.999999999999988));
#23090 = VERTEX_POINT ('', #23080);
#23100 = CARTESIAN_POINT ('', (29.45, 22.2, 0.999999999999996));
#23110 = CARTESIAN_POINT ('', (29.45, -24.2, 0.999999999999988));
#23120 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#23100, #23110), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#23130 = EDGE_CURVE ('', #23020, #23090, #23120, .T.);
#23140 = ORIENTED_EDGE ('', *, *, #23130, .T.);
#23150 = CARTESIAN_POINT ('', (29.45, -24.2, 0.999999999999988));
#23160 = CARTESIAN_POINT ('', (16.55, -24.2, 0.999999999999988));
#23170 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#23150, #23160), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#23180 = EDGE_CURVE ('', #23090, #22930, #23170, .T.);
#23190 = ORIENTED_EDGE ('', *, *, #23180, .T.);
#23200 = EDGE_LOOP ('', (#23000, #23070, #23140, #23190));
#23210 = FACE_OUTER_BOUND ('', #23200, .T.);
#23220 = CARTESIAN_POINT ('', (29.451, -24.201, 0.999999999999988));
#23230 = CARTESIAN_POINT ('', (29.451, 22.201, 0.999999999999996));
#23240 = CARTESIAN_POINT ('', (16.549, -24.201, 0.999999999999988));
#23250 = CARTESIAN_POINT ('', (16.549, 22.201, 0.999999999999996));
#23260 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#23220, #23230), (#23240, #23250)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.298999999999999, 13.201), (0.298999999999999, 46.701), .UNSPECIFIED.);
#23270 = ADVANCED_FACE ('', (#23210), #23260, .T.);
#23280 = CARTESIAN_POINT ('', (16.55, -24.2, 0.999999999999988));
#23290 = CARTESIAN_POINT ('', (16.55, -24.5, 1.29999999999999));
#23300 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#23280, #23290), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#23310 = EDGE_CURVE ('', #22930, #22730, #23300, .T.);
#23320 = ORIENTED_EDGE ('', *, *, #23310, .F.);
#23330 = ORIENTED_EDGE ('', *, *, #23180, .F.);
#23340 = CARTESIAN_POINT ('', (29.45, -24.5, 1.29999999999999));
#23350 = CARTESIAN_POINT ('', (29.45, -24.2, 0.999999999999988));
#23360 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#23340, #23350), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#23370 = EDGE_CURVE ('', #22570, #23090, #23360, .T.);
#23380 = ORIENTED_EDGE ('', *, *, #23370, .F.);
#23390 = ORIENTED_EDGE ('', *, *, #22820, .F.);
#23400 = EDGE_LOOP ('', (#23320, #23330, #23380, #23390));
#23410 = FACE_OUTER_BOUND ('', #23400, .T.);
#23420 = CARTESIAN_POINT ('', (29.451, -24.199, 0.998999999999987));
#23430 = CARTESIAN_POINT ('', (16.549, -24.199, 0.998999999999987));
#23440 = CARTESIAN_POINT ('', (29.451, -24.501, 1.30099999999999));
#23450 = CARTESIAN_POINT ('', (16.549, -24.501, 1.30099999999999));
#23460 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#23420, #23430), (#23440, #23450)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.425678282274305, 0.00141421356237359), (-13.201, -0.298999999999999), .UNSPECIFIED.);
#23470 = ADVANCED_FACE ('', (#23410), #23460, .T.);
#23480 = CARTESIAN_POINT ('', (16.55, -24.2, 0.999999999999988));
#23490 = CARTESIAN_POINT ('', (16.25, -24.2, 1.29999999999999));
#23500 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#23480, #23490), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#23510 = EDGE_CURVE ('', #22930, #21490, #23500, .T.);
#23520 = ORIENTED_EDGE ('', *, *, #23510, .F.);
#23530 = ORIENTED_EDGE ('', *, *, #23310, .T.);
#23540 = CARTESIAN_POINT ('', (16.25, -24.2, 1.29999999999999));
#23550 = CARTESIAN_POINT ('', (16.55, -24.5, 1.29999999999999));
#23560 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#23540, #23550), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#23570 = EDGE_CURVE ('', #21490, #22730, #23560, .T.);
#23580 = ORIENTED_EDGE ('', *, *, #23570, .F.);
#23590 = EDGE_LOOP ('', (#23520, #23530, #23580));
#23600 = FACE_OUTER_BOUND ('', #23590, .T.);
#23610 = CARTESIAN_POINT ('', (16.7016666666667, -24.5013333333333, 1.14966666666665));
#23620 = CARTESIAN_POINT ('', (16.5003333333333, -24.0986666666667, 0.948333333333318));
#23630 = CARTESIAN_POINT ('', (16.3996666666667, -24.5013333333333, 1.45166666666665));
#23640 = CARTESIAN_POINT ('', (16.1983333333333, -24.0986666666667, 1.25033333333332));
#23650 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#23610, #23620), (#23630, #23640)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.213546247918339, 0.213546247918337), (-0.00163299316185572, 0.491530941718491), .UNSPECIFIED.);
#23660 = ADVANCED_FACE ('', (#23600), #23650, .T.);
#23670 = CARTESIAN_POINT ('', (29.45, -24.5, 1.29999999999999));
#23680 = CARTESIAN_POINT ('', (29.75, -24.2, 1.29999999999999));
#23690 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#23670, #23680), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#23700 = EDGE_CURVE ('', #22570, #22370, #23690, .T.);
#23710 = ORIENTED_EDGE ('', *, *, #23700, .F.);
#23720 = ORIENTED_EDGE ('', *, *, #23370, .T.);
#23730 = CARTESIAN_POINT ('', (29.75, -24.2, 1.29999999999999));
#23740 = CARTESIAN_POINT ('', (29.45, -24.2, 0.999999999999988));
#23750 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#23730, #23740), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#23760 = EDGE_CURVE ('', #22370, #23090, #23750, .T.);
#23770 = ORIENTED_EDGE ('', *, *, #23760, .F.);
#23780 = EDGE_LOOP ('', (#23710, #23720, #23770));
#23790 = FACE_OUTER_BOUND ('', #23780, .T.);
#23800 = CARTESIAN_POINT ('', (29.6003333333333, -24.5013333333333, 1.45166666666665));
#23810 = CARTESIAN_POINT ('', (29.8016666666667, -24.0986666666667, 1.25033333333332));
#23820 = CARTESIAN_POINT ('', (29.2983333333333, -24.5013333333333, 1.14966666666665));
#23830 = CARTESIAN_POINT ('', (29.4996666666667, -24.0986666666667, 0.948333333333319));
#23840 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#23800, #23810), (#23820, #23830)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00141421356237359, 0.425678282274301), (-0.369056454579335, 0.124107480301015), .UNSPECIFIED.);
#23850 = ADVANCED_FACE ('', (#23790), #23840, .T.);
#23860 = ORIENTED_EDGE ('', *, *, #23570, .T.);
#23870 = ORIENTED_EDGE ('', *, *, #22770, .F.);
#23880 = CARTESIAN_POINT ('', (16.25, -24.2, 5.69999999999999));
#23890 = CARTESIAN_POINT ('', (16.55, -24.5, 5.69999999999999));
#23900 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#23880, #23890), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#23910 = EDGE_CURVE ('', #21510, #22660, #23900, .T.);
#23920 = ORIENTED_EDGE ('', *, *, #23910, .F.);
#23930 = ORIENTED_EDGE ('', *, *, #21550, .F.);
#23940 = EDGE_LOOP ('', (#23860, #23870, #23920, #23930));
#23950 = FACE_OUTER_BOUND ('', #23940, .T.);
#23960 = CARTESIAN_POINT ('', (16.249, -24.199, 1.29899999999999));
#23970 = CARTESIAN_POINT ('', (16.249, -24.199, 5.70099999999999));
#23980 = CARTESIAN_POINT ('', (16.551, -24.501, 1.29899999999999));
#23990 = CARTESIAN_POINT ('', (16.551, -24.501, 5.70099999999999));
#24000 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#23960, #23970), (#23980, #23990)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.425678282274305, 0.00141421356237004), (0.298999999999998, 4.701), .UNSPECIFIED.);
#24010 = ADVANCED_FACE ('', (#23950), #24000, .T.);
#24020 = ORIENTED_EDGE ('', *, *, #23510, .T.);
#24030 = ORIENTED_EDGE ('', *, *, #21740, .F.);
#24040 = CARTESIAN_POINT ('', (16.55, 22.2, 0.999999999999996));
#24050 = CARTESIAN_POINT ('', (16.25, 22.2, 1.29999999999999));
#24060 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#24040, #24050), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#24070 = EDGE_CURVE ('', #22950, #21650, #24060, .T.);
#24080 = ORIENTED_EDGE ('', *, *, #24070, .F.);
#24090 = ORIENTED_EDGE ('', *, *, #22990, .F.);
#24100 = EDGE_LOOP ('', (#24020, #24030, #24080, #24090));
#24110 = FACE_OUTER_BOUND ('', #24100, .T.);
#24120 = CARTESIAN_POINT ('', (16.551, -24.201, 0.998999999999986));
#24130 = CARTESIAN_POINT ('', (16.551, 22.201, 0.998999999999994));
#24140 = CARTESIAN_POINT ('', (16.249, -24.201, 1.30099999999999));
#24150 = CARTESIAN_POINT ('', (16.249, 22.201, 1.301));
#24160 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#24120, #24130), (#24140, #24150)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.425678282274301, 0.00141421356237537), (0.298999999999999, 46.701), .UNSPECIFIED.);
#24170 = ADVANCED_FACE ('', (#24110), #24160, .T.);
#24180 = CARTESIAN_POINT ('', (29.45, 22.2, 0.999999999999996));
#24190 = CARTESIAN_POINT ('', (29.45, 22.5, 1.29999999999999));
#24200 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#24180, #24190), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#24210 = EDGE_CURVE ('', #23020, #22010, #24200, .T.);
#24220 = ORIENTED_EDGE ('', *, *, #24210, .F.);
#24230 = ORIENTED_EDGE ('', *, *, #23060, .F.);
#24240 = CARTESIAN_POINT ('', (16.55, 22.5, 1.29999999999999));
#24250 = CARTESIAN_POINT ('', (16.55, 22.2, 0.999999999999996));
#24260 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#24240, #24250), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#24270 = EDGE_CURVE ('', #21850, #22950, #24260, .T.);
#24280 = ORIENTED_EDGE ('', *, *, #24270, .F.);
#24290 = ORIENTED_EDGE ('', *, *, #22100, .F.);
#24300 = EDGE_LOOP ('', (#24220, #24230, #24280, #24290));
#24310 = FACE_OUTER_BOUND ('', #24300, .T.);
#24320 = CARTESIAN_POINT ('', (29.451, 22.501, 1.301));
#24330 = CARTESIAN_POINT ('', (16.549, 22.501, 1.301));
#24340 = CARTESIAN_POINT ('', (29.451, 22.199, 0.998999999999996));
#24350 = CARTESIAN_POINT ('', (16.549, 22.199, 0.998999999999996));
#24360 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#24320, #24330), (#24340, #24350)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00141421356237359, 0.425678282274301), (-13.201, -0.298999999999999), .UNSPECIFIED.);
#24370 = ADVANCED_FACE ('', (#24310), #24360, .T.);
#24380 = ORIENTED_EDGE ('', *, *, #23760, .T.);
#24390 = ORIENTED_EDGE ('', *, *, #23130, .F.);
#24400 = CARTESIAN_POINT ('', (29.75, 22.2, 1.29999999999999));
#24410 = CARTESIAN_POINT ('', (29.45, 22.2, 0.999999999999996));
#24420 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#24400, #24410), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#24430 = EDGE_CURVE ('', #22210, #23020, #24420, .T.);
#24440 = ORIENTED_EDGE ('', *, *, #24430, .F.);
#24450 = ORIENTED_EDGE ('', *, *, #22460, .F.);
#24460 = EDGE_LOOP ('', (#24380, #24390, #24440, #24450));
#24470 = FACE_OUTER_BOUND ('', #24460, .T.);
#24480 = CARTESIAN_POINT ('', (29.751, -24.201, 1.30099999999999));
#24490 = CARTESIAN_POINT ('', (29.751, 22.201, 1.301));
#24500 = CARTESIAN_POINT ('', (29.449, -24.201, 0.998999999999987));
#24510 = CARTESIAN_POINT ('', (29.449, 22.201, 0.998999999999996));
#24520 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#24480, #24490), (#24500, #24510)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00141421356237359, 0.425678282274301), (0.298999999999999, 46.701), .UNSPECIFIED.);
#24530 = ADVANCED_FACE ('', (#24470), #24520, .T.);
#24540 = ORIENTED_EDGE ('', *, *, #23700, .T.);
#24550 = ORIENTED_EDGE ('', *, *, #22410, .F.);
#24560 = CARTESIAN_POINT ('', (29.45, -24.5, 5.69999999999999));
#24570 = CARTESIAN_POINT ('', (29.75, -24.2, 5.69999999999999));
#24580 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#24560, #24570), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#24590 = EDGE_CURVE ('', #22590, #22300, #24580, .T.);
#24600 = ORIENTED_EDGE ('', *, *, #24590, .F.);
#24610 = ORIENTED_EDGE ('', *, *, #22630, .F.);
#24620 = EDGE_LOOP ('', (#24540, #24550, #24600, #24610));
#24630 = FACE_OUTER_BOUND ('', #24620, .T.);
#24640 = CARTESIAN_POINT ('', (29.449, -24.501, 1.29899999999999));
#24650 = CARTESIAN_POINT ('', (29.449, -24.501, 5.70099999999999));
#24660 = CARTESIAN_POINT ('', (29.751, -24.199, 1.29899999999999));
#24670 = CARTESIAN_POINT ('', (29.751, -24.199, 5.70099999999999));
#24680 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#24640, #24650), (#24660, #24670)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.425678282274305, 0.00141421356237359), (0.298999999999998, 4.701), .UNSPECIFIED.);
#24690 = ADVANCED_FACE ('', (#24630), #24680, .T.);
#24700 = CARTESIAN_POINT ('', (16.55, -24.5, 5.69999999999999));
#24710 = CARTESIAN_POINT ('', (16.55, -24.2, 5.99999999999998));
#24720 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#24700, #24710), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#24730 = EDGE_CURVE ('', #22660, #2390, #24720, .T.);
#24740 = ORIENTED_EDGE ('', *, *, #24730, .F.);
#24750 = ORIENTED_EDGE ('', *, *, #22700, .F.);
#24760 = CARTESIAN_POINT ('', (29.45, -24.2, 5.99999999999998));
#24770 = CARTESIAN_POINT ('', (29.45, -24.5, 5.69999999999999));
#24780 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#24760, #24770), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#24790 = EDGE_CURVE ('', #2410, #22590, #24780, .T.);
#24800 = ORIENTED_EDGE ('', *, *, #24790, .F.);
#24810 = ORIENTED_EDGE ('', *, *, #2450, .F.);
#24820 = EDGE_LOOP ('', (#24740, #24750, #24800, #24810));
#24830 = FACE_OUTER_BOUND ('', #24820, .T.);
#24840 = CARTESIAN_POINT ('', (29.451, -24.501, 5.69899999999999));
#24850 = CARTESIAN_POINT ('', (16.549, -24.501, 5.69899999999999));
#24860 = CARTESIAN_POINT ('', (29.451, -24.199, 6.00099999999999));
#24870 = CARTESIAN_POINT ('', (16.549, -24.199, 6.00099999999999));
#24880 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#24840, #24850), (#24860, #24870)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00141421356237004, 0.425678282274305), (-13.201, -0.298999999999999), .UNSPECIFIED.);
#24890 = ADVANCED_FACE ('', (#24830), #24880, .T.);
#24900 = ORIENTED_EDGE ('', *, *, #23910, .T.);
#24910 = ORIENTED_EDGE ('', *, *, #24730, .T.);
#24920 = CARTESIAN_POINT ('', (16.25, -24.2, 5.69999999999999));
#24930 = CARTESIAN_POINT ('', (16.55, -24.2, 5.99999999999998));
#24940 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#24920, #24930), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#24950 = EDGE_CURVE ('', #21510, #2390, #24940, .T.);
#24960 = ORIENTED_EDGE ('', *, *, #24950, .F.);
#24970 = EDGE_LOOP ('', (#24900, #24910, #24960));
#24980 = FACE_OUTER_BOUND ('', #24970, .T.);
#24990 = CARTESIAN_POINT ('', (16.3996666666667, -24.5013333333333, 5.54833333333332));
#25000 = CARTESIAN_POINT ('', (16.1983333333333, -24.0986666666667, 5.74966666666665));
#25010 = CARTESIAN_POINT ('', (16.7016666666667, -24.5013333333333, 5.85033333333332));
#25020 = CARTESIAN_POINT ('', (16.5003333333333, -24.0986666666667, 6.05166666666665));
#25030 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#24990, #25000), (#25010, #25020)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.425678282274301, 0.00141421356237537), (-0.369056454579329, 0.124107480301017), .UNSPECIFIED.);
#25040 = ADVANCED_FACE ('', (#24980), #25030, .T.);
#25050 = ORIENTED_EDGE ('', *, *, #24270, .T.);
#25060 = ORIENTED_EDGE ('', *, *, #24070, .T.);
#25070 = CARTESIAN_POINT ('', (16.55, 22.5, 1.29999999999999));
#25080 = CARTESIAN_POINT ('', (16.25, 22.2, 1.29999999999999));
#25090 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#25070, #25080), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#25100 = EDGE_CURVE ('', #21850, #21650, #25090, .T.);
#25110 = ORIENTED_EDGE ('', *, *, #25100, .F.);
#25120 = EDGE_LOOP ('', (#25050, #25060, #25110));
#25130 = FACE_OUTER_BOUND ('', #25120, .T.);
#25140 = CARTESIAN_POINT ('', (16.5003333333333, 22.0986666666667, 0.948333333333325));
#25150 = CARTESIAN_POINT ('', (16.7016666666667, 22.5013333333333, 1.14966666666666));
#25160 = CARTESIAN_POINT ('', (16.1983333333333, 22.0986666666667, 1.25033333333333));
#25170 = CARTESIAN_POINT ('', (16.3996666666667, 22.5013333333333, 1.45166666666666));
#25180 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#25140, #25150), (#25160, #25170)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.425678282274301, 0.00141421356237359), (-0.124107480301021, 0.369056454579333), .UNSPECIFIED.);
#25190 = ADVANCED_FACE ('', (#25130), #25180, .T.);
#25200 = ORIENTED_EDGE ('', *, *, #24430, .T.);
#25210 = ORIENTED_EDGE ('', *, *, #24210, .T.);
#25220 = CARTESIAN_POINT ('', (29.75, 22.2, 1.29999999999999));
#25230 = CARTESIAN_POINT ('', (29.45, 22.5, 1.29999999999999));
#25240 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#25220, #25230), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#25250 = EDGE_CURVE ('', #22210, #22010, #25240, .T.);
#25260 = ORIENTED_EDGE ('', *, *, #25250, .F.);
#25270 = EDGE_LOOP ('', (#25200, #25210, #25260));
#25280 = FACE_OUTER_BOUND ('', #25270, .T.);
#25290 = CARTESIAN_POINT ('', (29.8016666666667, 22.0986666666667, 1.25033333333333));
#25300 = CARTESIAN_POINT ('', (29.6003333333333, 22.5013333333333, 1.45166666666666));
#25310 = CARTESIAN_POINT ('', (29.4996666666667, 22.0986666666667, 0.948333333333329));
#25320 = CARTESIAN_POINT ('', (29.2983333333333, 22.5013333333333, 1.14966666666666));
#25330 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#25290, #25300), (#25310, #25320)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.213546247918337, 0.213546247918334), (-0.491530941718493, 0.0016329931618575), .UNSPECIFIED.);
#25340 = ADVANCED_FACE ('', (#25280), #25330, .T.);
#25350 = ORIENTED_EDGE ('', *, *, #24790, .T.);
#25360 = ORIENTED_EDGE ('', *, *, #24590, .T.);
#25370 = CARTESIAN_POINT ('', (29.45, -24.2, 5.99999999999998));
#25380 = CARTESIAN_POINT ('', (29.75, -24.2, 5.69999999999999));
#25390 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#25370, #25380), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#25400 = EDGE_CURVE ('', #2410, #22300, #25390, .T.);
#25410 = ORIENTED_EDGE ('', *, *, #25400, .F.);
#25420 = EDGE_LOOP ('', (#25350, #25360, #25410));
#25430 = FACE_OUTER_BOUND ('', #25420, .T.);
#25440 = CARTESIAN_POINT ('', (29.2983333333333, -24.5013333333333, 5.85033333333332));
#25450 = CARTESIAN_POINT ('', (29.4996666666667, -24.0986666666667, 6.05166666666665));
#25460 = CARTESIAN_POINT ('', (29.6003333333333, -24.5013333333333, 5.54833333333332));
#25470 = CARTESIAN_POINT ('', (29.8016666666667, -24.0986666666667, 5.74966666666665));
#25480 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#25440, #25450), (#25460, #25470)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00141421356237004, 0.425678282274305), (-0.369056454579335, 0.124107480301019), .UNSPECIFIED.);
#25490 = ADVANCED_FACE ('', (#25430), #25480, .T.);
#25500 = ORIENTED_EDGE ('', *, *, #24950, .T.);
#25510 = ORIENTED_EDGE ('', *, *, #2640, .F.);
#25520 = CARTESIAN_POINT ('', (16.25, 22.2, 5.7));
#25530 = CARTESIAN_POINT ('', (16.55, 22.2, 6.));
#25540 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#25520, #25530), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#25550 = EDGE_CURVE ('', #21580, #2550, #25540, .T.);
#25560 = ORIENTED_EDGE ('', *, *, #25550, .F.);
#25570 = ORIENTED_EDGE ('', *, *, #21620, .F.);
#25580 = EDGE_LOOP ('', (#25500, #25510, #25560, #25570));
#25590 = FACE_OUTER_BOUND ('', #25580, .T.);
#25600 = CARTESIAN_POINT ('', (16.249, -24.201, 5.69899999999998));
#25610 = CARTESIAN_POINT ('', (16.249, 22.201, 5.699));
#25620 = CARTESIAN_POINT ('', (16.551, -24.201, 6.00099999999999));
#25630 = CARTESIAN_POINT ('', (16.551, 22.201, 6.001));
#25640 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#25600, #25610), (#25620, #25630)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00141421356237359, 0.425678282274303), (-46.701, -0.298999999999999), .UNSPECIFIED.);
#25650 = ADVANCED_FACE ('', (#25590), #25640, .T.);
#25660 = ORIENTED_EDGE ('', *, *, #25100, .T.);
#25670 = ORIENTED_EDGE ('', *, *, #21690, .F.);
#25680 = CARTESIAN_POINT ('', (16.55, 22.5, 5.7));
#25690 = CARTESIAN_POINT ('', (16.25, 22.2, 5.7));
#25700 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#25680, #25690), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#25710 = EDGE_CURVE ('', #21870, #21580, #25700, .T.);
#25720 = ORIENTED_EDGE ('', *, *, #25710, .F.);
#25730 = ORIENTED_EDGE ('', *, *, #21910, .F.);
#25740 = EDGE_LOOP ('', (#25660, #25670, #25720, #25730));
#25750 = FACE_OUTER_BOUND ('', #25740, .T.);
#25760 = CARTESIAN_POINT ('', (16.551, 22.501, 1.29899999999999));
#25770 = CARTESIAN_POINT ('', (16.551, 22.501, 5.701));
#25780 = CARTESIAN_POINT ('', (16.249, 22.199, 1.29899999999999));
#25790 = CARTESIAN_POINT ('', (16.249, 22.199, 5.701));
#25800 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#25760, #25770), (#25780, #25790)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.425678282274301, 0.00141421356237359), (0.298999999999998, 4.701), .UNSPECIFIED.);
#25810 = ADVANCED_FACE ('', (#25750), #25800, .T.);
#25820 = ORIENTED_EDGE ('', *, *, #25250, .T.);
#25830 = ORIENTED_EDGE ('', *, *, #22050, .F.);
#25840 = CARTESIAN_POINT ('', (29.75, 22.2, 5.7));
#25850 = CARTESIAN_POINT ('', (29.45, 22.5, 5.7));
#25860 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#25840, #25850), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#25870 = EDGE_CURVE ('', #22230, #21940, #25860, .T.);
#25880 = ORIENTED_EDGE ('', *, *, #25870, .F.);
#25890 = ORIENTED_EDGE ('', *, *, #22270, .F.);
#25900 = EDGE_LOOP ('', (#25820, #25830, #25880, #25890));
#25910 = FACE_OUTER_BOUND ('', #25900, .T.);
#25920 = CARTESIAN_POINT ('', (29.751, 22.199, 1.29899999999999));
#25930 = CARTESIAN_POINT ('', (29.751, 22.199, 5.701));
#25940 = CARTESIAN_POINT ('', (29.449, 22.501, 1.29899999999999));
#25950 = CARTESIAN_POINT ('', (29.449, 22.501, 5.701));
#25960 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#25920, #25930), (#25940, #25950)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.425678282274305, 0.00141421356237359), (0.298999999999998, 4.701), .UNSPECIFIED.);
#25970 = ADVANCED_FACE ('', (#25910), #25960, .T.);
#25980 = ORIENTED_EDGE ('', *, *, #25400, .T.);
#25990 = ORIENTED_EDGE ('', *, *, #22340, .F.);
#26000 = CARTESIAN_POINT ('', (29.45, 22.2, 6.));
#26010 = CARTESIAN_POINT ('', (29.75, 22.2, 5.7));
#26020 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#26000, #26010), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#26030 = EDGE_CURVE ('', #2480, #22230, #26020, .T.);
#26040 = ORIENTED_EDGE ('', *, *, #26030, .F.);
#26050 = ORIENTED_EDGE ('', *, *, #2520, .F.);
#26060 = EDGE_LOOP ('', (#25980, #25990, #26040, #26050));
#26070 = FACE_OUTER_BOUND ('', #26060, .T.);
#26080 = CARTESIAN_POINT ('', (29.449, -24.201, 6.00099999999999));
#26090 = CARTESIAN_POINT ('', (29.449, 22.201, 6.001));
#26100 = CARTESIAN_POINT ('', (29.751, -24.201, 5.69899999999999));
#26110 = CARTESIAN_POINT ('', (29.751, 22.201, 5.699));
#26120 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#26080, #26090), (#26100, #26110)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.425678282274305, 0.00141421356237004), (-46.701, -0.298999999999999), .UNSPECIFIED.);
#26130 = ADVANCED_FACE ('', (#26070), #26120, .T.);
#26140 = ORIENTED_EDGE ('', *, *, #25710, .T.);
#26150 = ORIENTED_EDGE ('', *, *, #25550, .T.);
#26160 = CARTESIAN_POINT ('', (16.55, 22.5, 5.7));
#26170 = CARTESIAN_POINT ('', (16.55, 22.2, 6.));
#26180 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#26160, #26170), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#26190 = EDGE_CURVE ('', #21870, #2550, #26180, .T.);
#26200 = ORIENTED_EDGE ('', *, *, #26190, .F.);
#26210 = EDGE_LOOP ('', (#26140, #26150, #26200));
#26220 = FACE_OUTER_BOUND ('', #26210, .T.);
#26230 = CARTESIAN_POINT ('', (16.1983333333333, 22.0986666666667, 5.74966666666666));
#26240 = CARTESIAN_POINT ('', (16.3996666666667, 22.5013333333333, 5.54833333333333));
#26250 = CARTESIAN_POINT ('', (16.5003333333333, 22.0986666666667, 6.05166666666666));
#26260 = CARTESIAN_POINT ('', (16.7016666666667, 22.5013333333333, 5.85033333333333));
#26270 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#26230, #26240), (#26250, #26260)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.425678282274303, 0.00141421356237359), (-0.124107480301017, 0.369056454579329), .UNSPECIFIED.);
#26280 = ADVANCED_FACE ('', (#26220), #26270, .T.);
#26290 = ORIENTED_EDGE ('', *, *, #26030, .T.);
#26300 = ORIENTED_EDGE ('', *, *, #25870, .T.);
#26310 = CARTESIAN_POINT ('', (29.45, 22.2, 6.));
#26320 = CARTESIAN_POINT ('', (29.45, 22.5, 5.7));
#26330 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#26310, #26320), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#26340 = EDGE_CURVE ('', #2480, #21940, #26330, .T.);
#26350 = ORIENTED_EDGE ('', *, *, #26340, .F.);
#26360 = EDGE_LOOP ('', (#26290, #26300, #26350));
#26370 = FACE_OUTER_BOUND ('', #26360, .T.);
#26380 = CARTESIAN_POINT ('', (29.4996666666667, 22.0986666666667, 6.05166666666666));
#26390 = CARTESIAN_POINT ('', (29.2983333333333, 22.5013333333333, 5.85033333333333));
#26400 = CARTESIAN_POINT ('', (29.8016666666667, 22.0986666666667, 5.74966666666666));
#26410 = CARTESIAN_POINT ('', (29.6003333333333, 22.5013333333333, 5.54833333333333));
#26420 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#26380, #26390), (#26400, #26410)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.213546247918337, 0.213546247918337), (-0.491530941718494, 0.00163299316185928), .UNSPECIFIED.);
#26430 = ADVANCED_FACE ('', (#26370), #26420, .T.);
#26440 = ORIENTED_EDGE ('', *, *, #26190, .T.);
#26450 = ORIENTED_EDGE ('', *, *, #2590, .F.);
#26460 = ORIENTED_EDGE ('', *, *, #26340, .T.);
#26470 = ORIENTED_EDGE ('', *, *, #21980, .F.);
#26480 = EDGE_LOOP ('', (#26440, #26450, #26460, #26470));
#26490 = FACE_OUTER_BOUND ('', #26480, .T.);
#26500 = CARTESIAN_POINT ('', (29.451, 22.199, 6.00099999999999));
#26510 = CARTESIAN_POINT ('', (16.549, 22.199, 6.00099999999999));
#26520 = CARTESIAN_POINT ('', (29.451, 22.501, 5.69899999999999));
#26530 = CARTESIAN_POINT ('', (16.549, 22.501, 5.69899999999999));
#26540 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#26500, #26510), (#26520, #26530)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.425678282274301, 0.00141421356237714), (-13.201, -0.298999999999999), .UNSPECIFIED.);
#26550 = ADVANCED_FACE ('', (#26490), #26540, .T.);
#26560 = ORIENTED_EDGE ('', *, *, #5350, .F.);
#26570 = ORIENTED_EDGE ('', *, *, #9280, .F.);
#26580 = ORIENTED_EDGE ('', *, *, #17240, .F.);
#26590 = ORIENTED_EDGE ('', *, *, #16960, .F.);
#26600 = EDGE_LOOP ('', (#26560, #26570, #26580, #26590));
#26610 = FACE_OUTER_BOUND ('', #26600, .T.);
#26620 = CARTESIAN_POINT ('', (-40.001, -9.46373205080758, -1.73845937460146E-15));
#26630 = CARTESIAN_POINT ('', (-37.9986207671431, -10.0002679491924, -4.2085283705597E-15));
#26640 = CARTESIAN_POINT ('', (-40.001, -9.46373205080758, -9.46373205080758));
#26650 = CARTESIAN_POINT ('', (-37.9986207671431, -10.0002679491924, -10.0002679491924));
#26660 = CARTESIAN_POINT ('', (-40.001, 3.82350817550135E-15, -9.46373205080758));
#26670 = CARTESIAN_POINT ('', (-37.9986207671431, 4.04027777368005E-15, -10.0002679491924));
#26680 = CARTESIAN_POINT ('', (-40.001, 9.46373205080758, -9.46373205080758));
#26690 = CARTESIAN_POINT ('', (-37.9986207671431, 10.0002679491924, -10.0002679491924));
#26700 = CARTESIAN_POINT ('', (-40.001, 9.46373205080758, 5.90855697640124E-15));
#26710 = CARTESIAN_POINT ('', (-37.9986207671431, 10.0002679491924, 3.87202717680039E-15));
#26720 = CARTESIAN_POINT ('', (-40.001, 9.46373205080758, 9.46373205080759));
#26730 = CARTESIAN_POINT ('', (-37.9986207671431, 10.0002679491924, 10.0002679491924));
#26740 = CARTESIAN_POINT ('', (-40.001, -2.66453525910038E-15, 9.46373205080759));
#26750 = CARTESIAN_POINT ('', (-37.9986207671431, -2.81559816022061E-15, 10.0002679491924));
#26760 = CARTESIAN_POINT ('', (-40.001, -9.46373205080758, 9.46373205080759));
#26770 = CARTESIAN_POINT ('', (-37.9986207671431, -10.0002679491924, 10.0002679491924));
#26780 = CARTESIAN_POINT ('', (-40.001, -9.46373205080758, -1.73845937460146E-15));
#26790 = CARTESIAN_POINT ('', (-37.9986207671431, -10.0002679491924, -4.2085283705597E-15));
#26800 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#26620, #26630), (#26640, #26650), (#26660, #26670), (#26680, #26690), (#26700, #26710), (#26720, #26730), (#26740, #26750), (#26760, #26770), (#26780, #26790)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#26810 = ADVANCED_FACE ('', (#26610), #26800, .T.);
#26820 = CLOSED_SHELL ('', (#900, #1420, #1620, #1830, #1950, #2070, #2730, #3410, #4070, #4710, #5270, #5930, #9700, #10140, #10570, #10850, #11690, #12370, #13010, #13350, #13700, #14100, #14430, #14780, #15140, #15380, #15630, #15830, #16030, #16230, #16430, #16630, #16830, #17050, #17150, #17390, #17550, #17670, #17830, #17950, #18110, #18230, #18390, #18510, #18670, #18790, #18950, #19070, #19190, #19370, #19560, #19680, #19800, #20110, #20230, #20350, #20460, #20620, #20780, #21050, #21210, #21330, #21470, #21830, #22190, #22550, #22910, #23270, #23470, #23660, #23850, #24010, #24170, #24370, #24530, #24690, #24890, #25040, #25190, #25340, #25490, #25650, #25810, #25970, #26130, #26280, #26430, #26550, #26810));
#26830 = MANIFOLD_SOLID_BREP ('NOCUT', #26820);
#26840 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#26850 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#26860 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#26870 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #26840, 'DISTANCE_ACCURACY_VALUE', '');
#26880 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#26870))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#26840, #26850, #26860))
   REPRESENTATION_CONTEXT ('', '3D')
);
#26890 = COLOUR_RGB ('', 0.75294117647059, 0.75294117647059, 0.75294117647059);
#26900 = FILL_AREA_STYLE_COLOUR ('', #26890);
#26910 = FILL_AREA_STYLE ('', (#26900));
#26920 = SURFACE_STYLE_FILL_AREA (#26910);
#26930 = SURFACE_SIDE_STYLE ('', (#26920));
#26940 = SURFACE_STYLE_USAGE (.POSITIVE., #26930);
#26950 = PRESENTATION_STYLE_ASSIGNMENT ((#26940));
#26960 = STYLED_ITEM ('', (#26950), #26830);
#26970 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#26830), #26880);
#26980 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#26990 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #26980);
#27000 = MECHANICAL_CONTEXT ('', #26980, 'mechanical');
#27010 = PRODUCT ('NONE', '', '', (#27000));
#27020 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#27030 = PERSON ('', '', $, $, $, $);
#27040 = ORGANIZATION ($, '', '');
#27050 = PERSON_AND_ORGANIZATION (#27030, #27040);
#27060 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#27050, #27020, (#27010));
#27070 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#27010));
#27080 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #27010, .NOT_KNOWN.);
#27090 = APPROVAL_STATUS ('approved');
#27100 = APPROVAL (#27090, '');
#27110 = CALENDAR_DATE (2018, 17, 1);
#27120 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#27130 = LOCAL_TIME (10, 19, 29., #27120);
#27140 = DATE_AND_TIME (#27110, #27130);
#27150 = APPROVAL_DATE_TIME (#27140, #27100);
#27160 = APPROVAL_ROLE ('');
#27170 = PERSON ('', '', $, $, $, $);
#27180 = ORGANIZATION ($, '', '');
#27190 = PERSON_AND_ORGANIZATION (#27170, #27180);
#27200 = APPROVAL_PERSON_ORGANIZATION (#27190, #27100, #27160);
#27210 = CC_DESIGN_APPROVAL (#27100, (#27080));
#27220 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#27230 = PERSON ('', '', $, $, $, $);
#27240 = ORGANIZATION ($, '', '');
#27250 = PERSON_AND_ORGANIZATION (#27230, #27240);
#27260 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#27250, #27220, (#27080));
#27270 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#27280 = PERSON ('', '', $, $, $, $);
#27290 = ORGANIZATION ($, '', '');
#27300 = PERSON_AND_ORGANIZATION (#27280, #27290);
#27310 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#27300, #27270, (#27080));
#27320 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#27330 = SECURITY_CLASSIFICATION ('', '', #27320);
#27340 = APPROVAL_STATUS ('approved');
#27350 = APPROVAL (#27340, '');
#27360 = CALENDAR_DATE (2018, 17, 1);
#27370 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#27380 = LOCAL_TIME (10, 19, 29., #27370);
#27390 = DATE_AND_TIME (#27360, #27380);
#27400 = APPROVAL_DATE_TIME (#27390, #27350);
#27410 = APPROVAL_ROLE ('');
#27420 = PERSON ('', '', $, $, $, $);
#27430 = ORGANIZATION ($, '', '');
#27440 = PERSON_AND_ORGANIZATION (#27420, #27430);
#27450 = APPROVAL_PERSON_ORGANIZATION (#27440, #27350, #27410);
#27460 = CC_DESIGN_APPROVAL (#27350, (#27330));
#27470 = DATE_TIME_ROLE ('classification_date');
#27480 = CALENDAR_DATE (2018, 17, 1);
#27490 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#27500 = LOCAL_TIME (10, 19, 29., #27490);
#27510 = DATE_AND_TIME (#27480, #27500);
#27520 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#27510, #27470, (#27330));
#27530 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#27540 = PERSON ('', '', $, $, $, $);
#27550 = ORGANIZATION ($, '', '');
#27560 = PERSON_AND_ORGANIZATION (#27540, #27550);
#27570 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#27560, #27530, (#27330));
#27580 = CC_DESIGN_SECURITY_CLASSIFICATION (#27330, (#27080));
#27590 = DESIGN_CONTEXT ('', #26980, 'design');
#27600 = PRODUCT_DEFINITION ('', '', #27080, #27590);
#27610 = APPROVAL_STATUS ('approved');
#27620 = APPROVAL (#27610, '');
#27630 = CALENDAR_DATE (2018, 17, 1);
#27640 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#27650 = LOCAL_TIME (10, 19, 29., #27640);
#27660 = DATE_AND_TIME (#27630, #27650);
#27670 = APPROVAL_DATE_TIME (#27660, #27620);
#27680 = APPROVAL_ROLE ('');
#27690 = PERSON ('', '', $, $, $, $);
#27700 = ORGANIZATION ($, '', '');
#27710 = PERSON_AND_ORGANIZATION (#27690, #27700);
#27720 = APPROVAL_PERSON_ORGANIZATION (#27710, #27620, #27680);
#27730 = CC_DESIGN_APPROVAL (#27620, (#27600));
#27740 = DATE_TIME_ROLE ('creation_date');
#27750 = CALENDAR_DATE (2018, 17, 1);
#27760 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#27770 = LOCAL_TIME (10, 19, 29., #27760);
#27780 = DATE_AND_TIME (#27750, #27770);
#27790 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#27780, #27740, (#27600));
#27800 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#27810 = PERSON ('', '', $, $, $, $);
#27820 = ORGANIZATION ($, '', '');
#27830 = PERSON_AND_ORGANIZATION (#27810, #27820);
#27840 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#27830, #27800, (#27600));
#27850 = PRODUCT_DEFINITION_SHAPE ('', '', #27600);
#27860 = SHAPE_DEFINITION_REPRESENTATION (#27850, #26970);
ENDSEC;
END-ISO-10303-21;