ISO-10303-21;
HEADER;
FILE_DESCRIPTION ((), '1');
FILE_NAME ('q:\\engin ozkan\\ban\\KMH01-B1-40x25x44-IK.stp', '2017-11-17T13:23:20', ('Unknown'), ('TDM'), 'HarmonyWare STEP v2.0.2.9', 'T3D tool generator', '');
FILE_SCHEMA (('CONFIG_CONTROL_DESIGN'));
ENDSEC;

DATA;
#10 = CARTESIAN_POINT ('', (22., 30., 9.00000000000002));
#20 = VERTEX_POINT ('', #10);
#30 = CARTESIAN_POINT ('', (44., 30., 9.00000000000002));
#40 = VERTEX_POINT ('', #30);
#50 = CARTESIAN_POINT ('', (22., 30., 9.00000000000002));
#60 = CARTESIAN_POINT ('', (44., 30., 9.00000000000002));
#70 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#50, #60), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#80 = EDGE_CURVE ('', #20, #40, #70, .T.);
#90 = ORIENTED_EDGE ('', *, *, #80, .T.);
#100 = CARTESIAN_POINT ('', (44., -42.5, 8.99999999999998));
#110 = VERTEX_POINT ('', #100);
#120 = CARTESIAN_POINT ('', (44., -42.5, 8.99999999999998));
#130 = CARTESIAN_POINT ('', (44., 30., 9.00000000000002));
#140 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#120, #130), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#150 = EDGE_CURVE ('', #110, #40, #140, .T.);
#160 = ORIENTED_EDGE ('', *, *, #150, .F.);
#170 = CARTESIAN_POINT ('', (22., -42.5, 8.99999999999999));
#180 = VERTEX_POINT ('', #170);
#190 = CARTESIAN_POINT ('', (44., -42.5, 8.99999999999998));
#200 = CARTESIAN_POINT ('', (22., -42.5, 8.99999999999999));
#210 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#190, #200), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#220 = EDGE_CURVE ('', #110, #180, #210, .T.);
#230 = ORIENTED_EDGE ('', *, *, #220, .T.);
#240 = CARTESIAN_POINT ('', (22., 30., 9.00000000000002));
#250 = CARTESIAN_POINT ('', (22., -42.5, 8.99999999999999));
#260 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#240, #250), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#270 = EDGE_CURVE ('', #20, #180, #260, .T.);
#280 = ORIENTED_EDGE ('', *, *, #270, .F.);
#290 = EDGE_LOOP ('', (#90, #160, #230, #280));
#300 = FACE_OUTER_BOUND ('', #290, .T.);
#310 = CARTESIAN_POINT ('', (22.8, -42.2, 8.99999999999998));
#320 = VERTEX_POINT ('', #310);
#330 = CARTESIAN_POINT ('', (43.2, -42.2, 8.99999999999999));
#340 = VERTEX_POINT ('', #330);
#350 = CARTESIAN_POINT ('', (22.8, -42.2, 8.99999999999998));
#360 = CARTESIAN_POINT ('', (43.2, -42.2, 8.99999999999999));
#370 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#350, #360), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#380 = EDGE_CURVE ('', #320, #340, #370, .T.);
#390 = ORIENTED_EDGE ('', *, *, #380, .T.);
#400 = CARTESIAN_POINT ('', (43.2, 29.7, 8.99999999999999));
#410 = VERTEX_POINT ('', #400);
#420 = CARTESIAN_POINT ('', (43.2, -42.2, 8.99999999999999));
#430 = CARTESIAN_POINT ('', (43.2, 29.7, 8.99999999999999));
#440 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#420, #430), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#450 = EDGE_CURVE ('', #340, #410, #440, .T.);
#460 = ORIENTED_EDGE ('', *, *, #450, .T.);
#470 = CARTESIAN_POINT ('', (22.8, 29.7, 8.99999999999999));
#480 = VERTEX_POINT ('', #470);
#490 = CARTESIAN_POINT ('', (43.2, 29.7, 8.99999999999999));
#500 = CARTESIAN_POINT ('', (22.8, 29.7, 8.99999999999999));
#510 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#490, #500), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#520 = EDGE_CURVE ('', #410, #480, #510, .T.);
#530 = ORIENTED_EDGE ('', *, *, #520, .T.);
#540 = CARTESIAN_POINT ('', (22.8, 29.7, 8.99999999999999));
#550 = CARTESIAN_POINT ('', (22.8, -42.2, 8.99999999999998));
#560 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#540, #550), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#570 = EDGE_CURVE ('', #480, #320, #560, .T.);
#580 = ORIENTED_EDGE ('', *, *, #570, .T.);
#590 = EDGE_LOOP ('', (#390, #460, #530, #580));
#600 = FACE_BOUND ('', #590, .T.);
#610 = CARTESIAN_POINT ('', (44.001, 30.001, 9.00000000000001));
#620 = CARTESIAN_POINT ('', (21.999, 30.001, 9.00000000000001));
#630 = CARTESIAN_POINT ('', (44.001, -42.501, 8.99999999999999));
#640 = CARTESIAN_POINT ('', (21.999, -42.501, 8.99999999999999));
#650 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#610, #620), (#630, #640)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (12.499, 85.001), (91.546801721287, 113.548801721287), .UNSPECIFIED.);
#660 = ADVANCED_FACE ('', (#300, #600), #650, .T.);
#670 = CARTESIAN_POINT ('', (0.300000000000002, 42.5, -48.));
#680 = VERTEX_POINT ('', #670);
#690 = CARTESIAN_POINT ('', (0.300000000000002, 6.0166604983953, -48.));
#700 = VERTEX_POINT ('', #690);
#710 = CARTESIAN_POINT ('', (0.300000000000002, 42.5, -48.));
#720 = CARTESIAN_POINT ('', (0.300000000000002, 6.0166604983953, -48.));
#730 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#710, #720), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#740 = EDGE_CURVE ('', #680, #700, #730, .T.);
#750 = ORIENTED_EDGE ('', *, *, #740, .F.);
#760 = CARTESIAN_POINT ('', (44., 42.5, -48.));
#770 = VERTEX_POINT ('', #760);
#780 = CARTESIAN_POINT ('', (44., 42.5, -48.));
#790 = CARTESIAN_POINT ('', (0.300000000000004, 42.5, -48.));
#800 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#780, #790), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#810 = EDGE_CURVE ('', #770, #680, #800, .T.);
#820 = ORIENTED_EDGE ('', *, *, #810, .F.);
#830 = CARTESIAN_POINT ('', (44., 6.0166604983953, -48.));
#840 = VERTEX_POINT ('', #830);
#850 = CARTESIAN_POINT ('', (44., 6.0166604983953, -48.));
#860 = CARTESIAN_POINT ('', (44., 42.5, -48.));
#870 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#850, #860), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#880 = EDGE_CURVE ('', #840, #770, #870, .T.);
#890 = ORIENTED_EDGE ('', *, *, #880, .F.);
#900 = CARTESIAN_POINT ('', (44., 6.0166604983953, -48.));
#910 = CARTESIAN_POINT ('', (0.300000000000004, 6.0166604983953, -48.));
#920 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#900, #910), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#930 = EDGE_CURVE ('', #840, #700, #920, .T.);
#940 = ORIENTED_EDGE ('', *, *, #930, .T.);
#950 = EDGE_LOOP ('', (#750, #820, #890, #940));
#960 = FACE_OUTER_BOUND ('', #950, .T.);
#970 = CARTESIAN_POINT ('', (34.5, 9.50000000000002, -48.));
#980 = VERTEX_POINT ('', #970);
#990 = CARTESIAN_POINT ('', (34.5, 9.50000000000001, -48.));
#1000 = CARTESIAN_POINT ('', (37., 9.50000000000001, -48.));
#1010 = CARTESIAN_POINT ('', (37., 12., -48.));
#1020 = CARTESIAN_POINT ('', (37., 14.5, -48.));
#1030 = CARTESIAN_POINT ('', (34.5, 14.5, -48.));
#1040 = CARTESIAN_POINT ('', (32., 14.5, -48.));
#1050 = CARTESIAN_POINT ('', (32., 12., -48.));
#1060 = CARTESIAN_POINT ('', (32., 9.50000000000001, -48.));
#1070 = CARTESIAN_POINT ('', (34.5, 9.50000000000001, -48.));
#1080 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#990, #1000, #1010, #1020, #1030, #1040, #1050, #1060, #1070), .UNSPECIFIED., .T., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 2, 3), (0., 90., 180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#1090 = EDGE_CURVE ('', #980, #980, #1080, .T.);
#1100 = ORIENTED_EDGE ('', *, *, #1090, .T.);
#1110 = EDGE_LOOP ('', (#1100));
#1120 = FACE_BOUND ('', #1110, .T.);
#1130 = CARTESIAN_POINT ('', (44.001, 42.501, -48.));
#1140 = CARTESIAN_POINT ('', (0.298999999999999, 42.501, -48.));
#1150 = CARTESIAN_POINT ('', (44.001, 6.01566049839529, -48.));
#1160 = CARTESIAN_POINT ('', (0.298999999999999, 6.01566049839529, -48.));
#1170 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1130, #1140), (#1150, #1160)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-36.4843395016047, 0.000999999999997669), (-0.000999999999997669, 43.701), .UNSPECIFIED.);
#1180 = ADVANCED_FACE ('', (#960, #1120), #1170, .T.);
#1190 = CARTESIAN_POINT ('', (0.3, 41.4517792139252, -1.99999999999999));
#1200 = VERTEX_POINT ('', #1190);
#1210 = CARTESIAN_POINT ('', (0.3, -25.8069758011279, 32.5));
#1220 = VERTEX_POINT ('', #1210);
#1230 = CARTESIAN_POINT ('', (0.3, 41.4517792139252, -2.));
#1240 = CARTESIAN_POINT ('', (0.3, 39.8818309842393, -34.5385736971153));
#1250 = CARTESIAN_POINT ('', (0.3, 7.90129206591113, -40.7408834426694));
#1260 = CARTESIAN_POINT ('', (0.3, -24.0792468524171, -46.9431931882234));
#1270 = CARTESIAN_POINT ('', (0.3, -37.69894069297, -17.3505005872433));
#1280 = CARTESIAN_POINT ('', (0.3, -51.318634533523, 12.2421920137368));
#1290 = CARTESIAN_POINT ('', (0.3, -25.8069758011279, 32.5));
#1300 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1230, #1240, #1250, #1260, #1270, #1280, #1290), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 3), (182.762312355604, 259.024304406773, 335.286296457943, 411.548288509112), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.786601101089875, 1., 0.786601101089875, 1., 0.786601101089875, 1.))
   REPRESENTATION_ITEM ('')
);
#1310 = EDGE_CURVE ('', #1200, #1220, #1300, .T.);
#1320 = ORIENTED_EDGE ('', *, *, #1310, .T.);
#1330 = CARTESIAN_POINT ('', (0., -25.8069758011279, 32.5));
#1340 = VERTEX_POINT ('', #1330);
#1350 = CARTESIAN_POINT ('', (0.3, -25.8069758011279, 32.5));
#1360 = CARTESIAN_POINT ('', (0., -25.8069758011279, 32.5));
#1370 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1350, #1360), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1380 = EDGE_CURVE ('', #1220, #1340, #1370, .T.);
#1390 = ORIENTED_EDGE ('', *, *, #1380, .T.);
#1400 = CARTESIAN_POINT ('', (0., 41.4517792139252, -1.99999999999999));
#1410 = VERTEX_POINT ('', #1400);
#1420 = CARTESIAN_POINT ('', (0., 41.4517792139252, -2.));
#1430 = CARTESIAN_POINT ('', (0., 39.8818309842393, -34.5385736971153));
#1440 = CARTESIAN_POINT ('', (0., 7.90129206591113, -40.7408834426694));
#1450 = CARTESIAN_POINT ('', (0., -24.0792468524171, -46.9431931882234));
#1460 = CARTESIAN_POINT ('', (0., -37.69894069297, -17.3505005872433));
#1470 = CARTESIAN_POINT ('', (0., -51.318634533523, 12.2421920137368));
#1480 = CARTESIAN_POINT ('', (0., -25.8069758011279, 32.5));
#1490 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1420, #1430, #1440, #1450, #1460, #1470, #1480), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 3), (182.762312355604, 259.024304406773, 335.286296457943, 411.548288509112), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.786601101089875, 1., 0.786601101089875, 1., 0.786601101089875, 1.))
   REPRESENTATION_ITEM ('')
);
#1500 = EDGE_CURVE ('', #1410, #1340, #1490, .T.);
#1510 = ORIENTED_EDGE ('', *, *, #1500, .F.);
#1520 = CARTESIAN_POINT ('', (0., 41.4517792139252, -1.99999999999999));
#1530 = CARTESIAN_POINT ('', (0.3, 41.4517792139252, -1.99999999999999));
#1540 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1520, #1530), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1550 = EDGE_CURVE ('', #1410, #1200, #1540, .T.);
#1560 = ORIENTED_EDGE ('', *, *, #1550, .T.);
#1570 = EDGE_LOOP ('', (#1320, #1390, #1510, #1560));
#1580 = FACE_OUTER_BOUND ('', #1570, .T.);
#1590 = CARTESIAN_POINT ('', (0.3312, 41.5, 7.62342632469227E-15));
#1600 = CARTESIAN_POINT ('', (-0.0312000000000001, 41.5, 7.62342632469227E-15));
#1610 = CARTESIAN_POINT ('', (0.3312, 41.5, -41.5));
#1620 = CARTESIAN_POINT ('', (-0.0312000000000001, 41.5, -41.5));
#1630 = CARTESIAN_POINT ('', (0.3312, -2.04788483795369E-15, -41.5));
#1640 = CARTESIAN_POINT ('', (-0.0312, -2.04836959075384E-15, -41.5));
#1650 = CARTESIAN_POINT ('', (0.3312, -41.5, -41.5));
#1660 = CARTESIAN_POINT ('', (-0.0312, -41.5, -41.5));
#1670 = CARTESIAN_POINT ('', (0.3312, -41.5, -5.60028318355279E-15));
#1680 = CARTESIAN_POINT ('', (-0.0312, -41.5, -5.60028318355279E-15));
#1690 = CARTESIAN_POINT ('', (0.3312, -41.5, 41.5));
#1700 = CARTESIAN_POINT ('', (-0.0312, -41.5, 41.5));
#1710 = CARTESIAN_POINT ('', (0.3312, -2.03538785626603E-14, 41.5));
#1720 = CARTESIAN_POINT ('', (-0.0312, -2.03543633154604E-14, 41.5));
#1730 = CARTESIAN_POINT ('', (0.3312, 41.5, 41.5));
#1740 = CARTESIAN_POINT ('', (-0.0312000000000001, 41.5, 41.5));
#1750 = CARTESIAN_POINT ('', (0.3312, 41.5, 7.62342632469227E-15));
#1760 = CARTESIAN_POINT ('', (-0.0312000000000001, 41.5, 7.62342632469227E-15));
#1770 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#1590, #1600), (#1610, #1620), (#1630, #1640), (#1650, #1660), (#1670, #1680), (#1690, #1700), (#1710, #1720), (#1730, #1740), (#1750, #1760)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#1780 = ADVANCED_FACE ('', (#1580), #1770, .T.);
#1790 = CARTESIAN_POINT ('', (44., 21.5186038117718, 24.0623001455081));
#1800 = VERTEX_POINT ('', #1790);
#1810 = CARTESIAN_POINT ('', (44., 25.0000741764932, 30.7499999993527));
#1820 = VERTEX_POINT ('', #1810);
#1830 = CARTESIAN_POINT ('', (44., 21.5186038117718, 24.0623001455081));
#1840 = CARTESIAN_POINT ('', (44., 20.0393566742037, 26.1748839965049));
#1850 = CARTESIAN_POINT ('', (44., 21.2302210845825, 28.4624645038507));
#1860 = CARTESIAN_POINT ('', (44., 22.4210854949613, 30.7500450111966));
#1870 = CARTESIAN_POINT ('', (44., 25.0000741764932, 30.7499999993527));
#1880 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1830, #1840, #1850, #1860, #1870), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (145., 207.5005, 270.001), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.854909607089453, 1., 0.854909607089453, 1.))
   REPRESENTATION_ITEM ('')
);
#1890 = EDGE_CURVE ('', #1800, #1820, #1880, .T.);
#1900 = ORIENTED_EDGE ('', *, *, #1890, .F.);
#1910 = CARTESIAN_POINT ('', (36.5, 21.5186038117718, 24.0623001455081));
#1920 = VERTEX_POINT ('', #1910);
#1930 = CARTESIAN_POINT ('', (44., 21.5186038117718, 24.0623001455081));
#1940 = CARTESIAN_POINT ('', (36.5, 21.5186038117718, 24.0623001455081));
#1950 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1930, #1940), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1960 = EDGE_CURVE ('', #1800, #1920, #1950, .T.);
#1970 = ORIENTED_EDGE ('', *, *, #1960, .T.);
#1980 = CARTESIAN_POINT ('', (36.5, 25.0000741764932, 30.7499999993527));
#1990 = VERTEX_POINT ('', #1980);
#2000 = CARTESIAN_POINT ('', (36.5, 21.5186038117718, 24.0623001455081));
#2010 = CARTESIAN_POINT ('', (36.5, 20.0393566742037, 26.1748839965049));
#2020 = CARTESIAN_POINT ('', (36.5, 21.2302210845825, 28.4624645038507));
#2030 = CARTESIAN_POINT ('', (36.5, 22.4210854949613, 30.7500450111966));
#2040 = CARTESIAN_POINT ('', (36.5, 25.0000741764932, 30.7499999993527));
#2050 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2000, #2010, #2020, #2030, #2040), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (145., 207.5005, 270.001), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.854909607089453, 1., 0.854909607089453, 1.))
   REPRESENTATION_ITEM ('')
);
#2060 = EDGE_CURVE ('', #1920, #1990, #2050, .T.);
#2070 = ORIENTED_EDGE ('', *, *, #2060, .T.);
#2080 = CARTESIAN_POINT ('', (44., 25.0000741764932, 30.7499999993527));
#2090 = CARTESIAN_POINT ('', (36.5, 25.0000741764932, 30.7499999993527));
#2100 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2080, #2090), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2110 = EDGE_CURVE ('', #1820, #1990, #2100, .T.);
#2120 = ORIENTED_EDGE ('', *, *, #2110, .F.);
#2130 = EDGE_LOOP ('', (#1900, #1970, #2070, #2120));
#2140 = FACE_OUTER_BOUND ('', #2130, .T.);
#2150 = CARTESIAN_POINT ('', (44.7512, 29.25, 26.5));
#2160 = CARTESIAN_POINT ('', (35.7488, 29.25, 26.5));
#2170 = CARTESIAN_POINT ('', (44.7512, 29.25, 30.75));
#2180 = CARTESIAN_POINT ('', (35.7488, 29.25, 30.75));
#2190 = CARTESIAN_POINT ('', (44.7512, 25., 30.75));
#2200 = CARTESIAN_POINT ('', (35.7488, 25., 30.75));
#2210 = CARTESIAN_POINT ('', (44.7512, 20.75, 30.75));
#2220 = CARTESIAN_POINT ('', (35.7488, 20.75, 30.75));
#2230 = CARTESIAN_POINT ('', (44.7512, 20.75, 26.5));
#2240 = CARTESIAN_POINT ('', (35.7488, 20.75, 26.5));
#2250 = CARTESIAN_POINT ('', (44.7512, 20.75, 22.25));
#2260 = CARTESIAN_POINT ('', (35.7488, 20.75, 22.25));
#2270 = CARTESIAN_POINT ('', (44.7512, 25., 22.25));
#2280 = CARTESIAN_POINT ('', (35.7488, 25., 22.25));
#2290 = CARTESIAN_POINT ('', (44.7512, 29.25, 22.25));
#2300 = CARTESIAN_POINT ('', (35.7488, 29.25, 22.25));
#2310 = CARTESIAN_POINT ('', (44.7512, 29.25, 26.5));
#2320 = CARTESIAN_POINT ('', (35.7488, 29.25, 26.5));
#2330 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#2150, #2160), (#2170, #2180), (#2190, #2200), (#2210, #2220), (#2230, #2240), (#2250, #2260), (#2270, #2280), (#2290, #2300), (#2310, #2320)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#2340 = ADVANCED_FACE ('', (#2140), #2330, .T.);
#2350 = CARTESIAN_POINT ('', (-59.500000274339, -20., -6.07002629972285E-15));
#2360 = VERTEX_POINT ('', #2350);
#2370 = CARTESIAN_POINT ('', (-63., -19.0621779, -2.45257260129645E-14));
#2380 = VERTEX_POINT ('', #2370);
#2390 = CARTESIAN_POINT ('', (-59.500000274339, -20., -2.21092394544367E-15));
#2400 = CARTESIAN_POINT ('', (-63., -19.0621779, -3.50124738716435E-15));
#2410 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2390, #2400), .UNSPECIFIED., .F., .U., (2, 2), (0.000285551136022164, 0.999714448863982), .UNSPECIFIED.);
#2420 = EDGE_CURVE ('', #2360, #2380, #2410, .T.);
#2430 = ORIENTED_EDGE ('', *, *, #2420, .T.);
#2440 = CARTESIAN_POINT ('', (-63., 10.3617868290777, 16.));
#2450 = VERTEX_POINT ('', #2440);
#2460 = CARTESIAN_POINT ('', (-63., 10.3617868290777, 16.));
#2470 = CARTESIAN_POINT ('', (-63., 22.3174320835041, 8.25738452934749));
#2480 = CARTESIAN_POINT ('', (-63., 18.2806109401635, -5.40239668532626));
#2490 = CARTESIAN_POINT ('', (-63., 14.2437897968229, -19.0621779));
#2500 = CARTESIAN_POINT ('', (-63., -7.59284098325969E-15, -19.0621779));
#2510 = CARTESIAN_POINT ('', (-63., -14.2437897968229, -19.0621779));
#2520 = CARTESIAN_POINT ('', (-63., -18.2806109401635, -5.40239668532624));
#2530 = CARTESIAN_POINT ('', (-63., -19.0621779, -2.75773315010955));
#2540 = CARTESIAN_POINT ('', (-63., -19.0621779, -2.43687976764454E-14));
#2550 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2460, #2470, #2480, #2490, #2500, #2510, #2520, #2530, #2540), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 2, 3), (302.92756512312, 376.46378256156, 450., 523.53621743844, 540.49386709157), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.801064668131945, 1., 0.801064668131945, 1., 0.801064668131945, 1., 0.954124977066279, 0.929407761641234))
   REPRESENTATION_ITEM ('')
);
#2560 = EDGE_CURVE ('', #2450, #2380, #2550, .T.);
#2570 = ORIENTED_EDGE ('', *, *, #2560, .F.);
#2580 = CARTESIAN_POINT ('', (-59.500000274339, 12., 16.));
#2590 = VERTEX_POINT ('', #2580);
#2600 = CARTESIAN_POINT ('', (-59.500000274339, 12., 16.));
#2610 = CARTESIAN_POINT ('', (-60.6761824698201, 11.474738217615, 16.));
#2620 = CARTESIAN_POINT ('', (-61.8446063220679, 10.9313216796317, 16.));
#2630 = CARTESIAN_POINT ('', (-63., 10.3617868290777, 16.));
#2640 = B_SPLINE_CURVE_WITH_KNOTS ('', 3, (#2600, #2610, #2620, #2630), .UNSPECIFIED., .F., .U., (4, 4), (0., 1.), .UNSPECIFIED.);
#2650 = EDGE_CURVE ('', #2590, #2450, #2640, .T.);
#2660 = ORIENTED_EDGE ('', *, *, #2650, .F.);
#2670 = CARTESIAN_POINT ('', (-59.500000274339, -20., -6.70904052638622E-15));
#2680 = CARTESIAN_POINT ('', (-59.500000274339, -20., -3.24555320336759));
#2690 = CARTESIAN_POINT ('', (-59.500000274339, -18.9736659610103, -6.32455532033676));
#2700 = CARTESIAN_POINT ('', (-59.500000274339, -14.4151844011225, -20.));
#2710 = CARTESIAN_POINT ('', (-59.500000274339, 3.94430452610506E-31, -20.));
#2720 = CARTESIAN_POINT ('', (-59.500000274339, 14.4151844011225, -20.));
#2730 = CARTESIAN_POINT ('', (-59.500000274339, 18.9736659610103, -6.32455532033676));
#2740 = CARTESIAN_POINT ('', (-59.500000274339, 23.532147520898, 7.35088935932649));
#2750 = CARTESIAN_POINT ('', (-59.500000274339, 12., 16.));
#2760 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2670, #2680, #2690, #2700, #2710, #2720, #2730, #2740, #2750), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 2, 3), (179.561835621107, 198.434948822922, 270., 341.565051177078, 413.130102354156), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.926697180237448, 0.950220847350557, 1., 0.811242185175561, 1., 0.811242185175561, 1., 0.811242185175561, 1.))
   REPRESENTATION_ITEM ('')
);
#2770 = EDGE_CURVE ('', #2360, #2590, #2760, .T.);
#2780 = ORIENTED_EDGE ('', *, *, #2770, .F.);
#2790 = EDGE_LOOP ('', (#2430, #2570, #2660, #2780));
#2800 = FACE_OUTER_BOUND ('', #2790, .T.);
#2810 = CARTESIAN_POINT ('', (-63.001, -19.0619099508076, -3.50161605103373E-15));
#2820 = CARTESIAN_POINT ('', (-59.499000274339, -20.0002679491924, -2.21055528157428E-15));
#2830 = CARTESIAN_POINT ('', (-63.001, -19.0619099508076, -19.0619099508076));
#2840 = CARTESIAN_POINT ('', (-59.499000274339, -20.0002679491924, -20.0002679491924));
#2850 = CARTESIAN_POINT ('', (-63.001, 5.22099056471457E-15, -19.0619099508076));
#2860 = CARTESIAN_POINT ('', (-59.499000274339, 5.20473956884648E-15, -20.0002679491924));
#2870 = CARTESIAN_POINT ('', (-63.001, 19.0619099508076, -19.0619099508076));
#2880 = CARTESIAN_POINT ('', (-59.499000274339, 20.0002679491924, -20.0002679491924));
#2890 = CARTESIAN_POINT ('', (-63.001, 19.0619099508076, -4.16186516785617E-15));
#2900 = CARTESIAN_POINT ('', (-59.499000274339, 20.0002679491924, -2.90330639013289E-15));
#2910 = CARTESIAN_POINT ('', (-63.001, 19.0619099508076, 19.0619099508076));
#2920 = CARTESIAN_POINT ('', (-59.499000274339, 20.0002679491924, 20.0002679491924));
#2930 = CARTESIAN_POINT ('', (-63.001, 8.21565038222616E-15, 19.0619099508076));
#2940 = CARTESIAN_POINT ('', (-59.499000274339, 8.34681709001188E-15, 20.0002679491924));
#2950 = CARTESIAN_POINT ('', (-63.001, -19.0619099508076, 19.0619099508076));
#2960 = CARTESIAN_POINT ('', (-59.499000274339, -20.0002679491924, 20.0002679491924));
#2970 = CARTESIAN_POINT ('', (-63.001, -19.0619099508076, -3.50161605103373E-15));
#2980 = CARTESIAN_POINT ('', (-59.499000274339, -20.0002679491924, -2.21055528157428E-15));
#2990 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#2810, #2820), (#2830, #2840), (#2850, #2860), (#2870, #2880), (#2890, #2900), (#2910, #2920), (#2930, #2940), (#2950, #2960), (#2970, #2980)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#3000 = ADVANCED_FACE ('', (#2800), #2990, .T.);
#3010 = CARTESIAN_POINT ('', (0., -20., -1.22464679914735E-15));
#3020 = VERTEX_POINT ('', #3010);
#3030 = CARTESIAN_POINT ('', (8.88178419700125E-16, -20., -3.67394039744206E-15));
#3040 = CARTESIAN_POINT ('', (-59.500000274339, -20., -3.67394039744206E-15));
#3050 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3030, #3040), .UNSPECIFIED., .F., .U., (2, 2), (0.0833473384647489, 0.916652661535251), .UNSPECIFIED.);
#3060 = EDGE_CURVE ('', #3020, #2360, #3050, .T.);
#3070 = ORIENTED_EDGE ('', *, *, #3060, .T.);
#3080 = ORIENTED_EDGE ('', *, *, #2770, .T.);
#3090 = CARTESIAN_POINT ('', (-49.4013203435596, 12., 16.));
#3100 = VERTEX_POINT ('', #3090);
#3110 = CARTESIAN_POINT ('', (-49.4013203435596, 12., 16.));
#3120 = CARTESIAN_POINT ('', (-59.500000274339, 12., 16.));
#3130 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3110, #3120), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3140 = EDGE_CURVE ('', #3100, #2590, #3130, .T.);
#3150 = ORIENTED_EDGE ('', *, *, #3140, .F.);
#3160 = CARTESIAN_POINT ('', (-47.7, 13.9838392468771, 14.2986796564404));
#3170 = VERTEX_POINT ('', #3160);
#3180 = CARTESIAN_POINT ('', (-47.7, 13.9838392468771, 14.2986796564404));
#3190 = CARTESIAN_POINT ('', (-48.3099694281291, 13.360136607061, 14.9086490845694));
#3200 = CARTESIAN_POINT ('', (-48.8778851832775, 12.6979135470429, 15.4765648397178));
#3210 = CARTESIAN_POINT ('', (-49.4013203435596, 12., 16.));
#3220 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#3180, #3190, #3200, #3210), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#3230 = EDGE_CURVE ('', #3170, #3100, #3220, .T.);
#3240 = ORIENTED_EDGE ('', *, *, #3230, .F.);
#3250 = CARTESIAN_POINT ('', (-45.9986796564404, 12., 16.));
#3260 = VERTEX_POINT ('', #3250);
#3270 = CARTESIAN_POINT ('', (-45.9986796564404, 12., 16.));
#3280 = CARTESIAN_POINT ('', (-46.5221148167225, 12.6979135470429, 15.4765648397178));
#3290 = CARTESIAN_POINT ('', (-47.0900305718709, 13.3601366070611, 14.9086490845694));
#3300 = CARTESIAN_POINT ('', (-47.7, 13.9838392468771, 14.2986796564404));
#3310 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#3270, #3280, #3290, #3300), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#3320 = EDGE_CURVE ('', #3260, #3170, #3310, .T.);
#3330 = ORIENTED_EDGE ('', *, *, #3320, .F.);
#3340 = CARTESIAN_POINT ('', (-45.4013203435596, 12., 16.));
#3350 = VERTEX_POINT ('', #3340);
#3360 = CARTESIAN_POINT ('', (-45.4013203435596, 12., 16.));
#3370 = CARTESIAN_POINT ('', (-45.9986796564404, 12., 16.));
#3380 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3360, #3370), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3390 = EDGE_CURVE ('', #3350, #3260, #3380, .T.);
#3400 = ORIENTED_EDGE ('', *, *, #3390, .F.);
#3410 = CARTESIAN_POINT ('', (-43.7, 13.9838392468771, 14.2986796564404));
#3420 = VERTEX_POINT ('', #3410);
#3430 = CARTESIAN_POINT ('', (-43.7, 13.9838392468771, 14.2986796564404));
#3440 = CARTESIAN_POINT ('', (-44.3099694281291, 13.360136607061, 14.9086490845694));
#3450 = CARTESIAN_POINT ('', (-44.8778851832775, 12.6979135470429, 15.4765648397178));
#3460 = CARTESIAN_POINT ('', (-45.4013203435596, 12., 16.));
#3470 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#3430, #3440, #3450, #3460), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#3480 = EDGE_CURVE ('', #3420, #3350, #3470, .T.);
#3490 = ORIENTED_EDGE ('', *, *, #3480, .F.);
#3500 = CARTESIAN_POINT ('', (-41.9986796564404, 12., 16.));
#3510 = VERTEX_POINT ('', #3500);
#3520 = CARTESIAN_POINT ('', (-41.9986796564404, 12., 16.));
#3530 = CARTESIAN_POINT ('', (-42.5221148167225, 12.6979135470429, 15.4765648397178));
#3540 = CARTESIAN_POINT ('', (-43.0900305718709, 13.3601366070611, 14.9086490845694));
#3550 = CARTESIAN_POINT ('', (-43.7, 13.9838392468771, 14.2986796564404));
#3560 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#3520, #3530, #3540, #3550), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#3570 = EDGE_CURVE ('', #3510, #3420, #3560, .T.);
#3580 = ORIENTED_EDGE ('', *, *, #3570, .F.);
#3590 = CARTESIAN_POINT ('', (-41.4013203435596, 12., 16.));
#3600 = VERTEX_POINT ('', #3590);
#3610 = CARTESIAN_POINT ('', (-41.4013203435596, 12., 16.));
#3620 = CARTESIAN_POINT ('', (-41.9986796564404, 12., 16.));
#3630 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3610, #3620), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3640 = EDGE_CURVE ('', #3600, #3510, #3630, .T.);
#3650 = ORIENTED_EDGE ('', *, *, #3640, .F.);
#3660 = CARTESIAN_POINT ('', (-39.7, 13.9838392468771, 14.2986796564404));
#3670 = VERTEX_POINT ('', #3660);
#3680 = CARTESIAN_POINT ('', (-39.7, 13.9838392468771, 14.2986796564404));
#3690 = CARTESIAN_POINT ('', (-40.3099694281291, 13.3601366070611, 14.9086490845694));
#3700 = CARTESIAN_POINT ('', (-40.8778851832775, 12.6979135470429, 15.4765648397178));
#3710 = CARTESIAN_POINT ('', (-41.4013203435596, 12., 16.));
#3720 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#3680, #3690, #3700, #3710), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#3730 = EDGE_CURVE ('', #3670, #3600, #3720, .T.);
#3740 = ORIENTED_EDGE ('', *, *, #3730, .F.);
#3750 = CARTESIAN_POINT ('', (-37.9986796564404, 12., 16.));
#3760 = VERTEX_POINT ('', #3750);
#3770 = CARTESIAN_POINT ('', (-37.9986796564404, 12., 16.));
#3780 = CARTESIAN_POINT ('', (-38.5221148167225, 12.6979135470429, 15.4765648397178));
#3790 = CARTESIAN_POINT ('', (-39.0900305718709, 13.3601366070611, 14.9086490845694));
#3800 = CARTESIAN_POINT ('', (-39.7, 13.9838392468771, 14.2986796564404));
#3810 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#3770, #3780, #3790, #3800), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#3820 = EDGE_CURVE ('', #3760, #3670, #3810, .T.);
#3830 = ORIENTED_EDGE ('', *, *, #3820, .F.);
#3840 = CARTESIAN_POINT ('', (-37.4013203435596, 12., 16.));
#3850 = VERTEX_POINT ('', #3840);
#3860 = CARTESIAN_POINT ('', (-37.4013203435596, 12., 16.));
#3870 = CARTESIAN_POINT ('', (-37.9986796564404, 12., 16.));
#3880 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3860, #3870), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3890 = EDGE_CURVE ('', #3850, #3760, #3880, .T.);
#3900 = ORIENTED_EDGE ('', *, *, #3890, .F.);
#3910 = CARTESIAN_POINT ('', (-35.7, 13.9838392468771, 14.2986796564404));
#3920 = VERTEX_POINT ('', #3910);
#3930 = CARTESIAN_POINT ('', (-35.7, 13.9838392468771, 14.2986796564404));
#3940 = CARTESIAN_POINT ('', (-36.3099694281291, 13.3601366070611, 14.9086490845694));
#3950 = CARTESIAN_POINT ('', (-36.8778851832775, 12.6979135470429, 15.4765648397178));
#3960 = CARTESIAN_POINT ('', (-37.4013203435596, 12., 16.));
#3970 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#3930, #3940, #3950, #3960), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#3980 = EDGE_CURVE ('', #3920, #3850, #3970, .T.);
#3990 = ORIENTED_EDGE ('', *, *, #3980, .F.);
#4000 = CARTESIAN_POINT ('', (-33.9986796564404, 12., 16.));
#4010 = VERTEX_POINT ('', #4000);
#4020 = CARTESIAN_POINT ('', (-33.9986796564404, 12., 16.));
#4030 = CARTESIAN_POINT ('', (-34.5221148167225, 12.6979135470429, 15.4765648397178));
#4040 = CARTESIAN_POINT ('', (-35.0900305718709, 13.3601366070611, 14.9086490845694));
#4050 = CARTESIAN_POINT ('', (-35.7, 13.9838392468771, 14.2986796564404));
#4060 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#4020, #4030, #4040, #4050), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#4070 = EDGE_CURVE ('', #4010, #3920, #4060, .T.);
#4080 = ORIENTED_EDGE ('', *, *, #4070, .F.);
#4090 = CARTESIAN_POINT ('', (-33.4013203435596, 12., 16.));
#4100 = VERTEX_POINT ('', #4090);
#4110 = CARTESIAN_POINT ('', (-33.4013203435596, 12., 16.));
#4120 = CARTESIAN_POINT ('', (-33.9986796564404, 12., 16.));
#4130 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4110, #4120), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4140 = EDGE_CURVE ('', #4100, #4010, #4130, .T.);
#4150 = ORIENTED_EDGE ('', *, *, #4140, .F.);
#4160 = CARTESIAN_POINT ('', (-31.7, 13.9838392468771, 14.2986796564404));
#4170 = VERTEX_POINT ('', #4160);
#4180 = CARTESIAN_POINT ('', (-31.7, 13.9838392468771, 14.2986796564404));
#4190 = CARTESIAN_POINT ('', (-32.3099694281291, 13.360136607061, 14.9086490845694));
#4200 = CARTESIAN_POINT ('', (-32.8778851832775, 12.6979135470429, 15.4765648397178));
#4210 = CARTESIAN_POINT ('', (-33.4013203435596, 12., 16.));
#4220 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#4180, #4190, #4200, #4210), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#4230 = EDGE_CURVE ('', #4170, #4100, #4220, .T.);
#4240 = ORIENTED_EDGE ('', *, *, #4230, .F.);
#4250 = CARTESIAN_POINT ('', (-29.9986796564404, 12., 16.));
#4260 = VERTEX_POINT ('', #4250);
#4270 = CARTESIAN_POINT ('', (-29.9986796564404, 12., 16.));
#4280 = CARTESIAN_POINT ('', (-30.5221148167225, 12.6979135470429, 15.4765648397178));
#4290 = CARTESIAN_POINT ('', (-31.0900305718709, 13.3601366070611, 14.9086490845694));
#4300 = CARTESIAN_POINT ('', (-31.7, 13.9838392468771, 14.2986796564404));
#4310 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#4270, #4280, #4290, #4300), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#4320 = EDGE_CURVE ('', #4260, #4170, #4310, .T.);
#4330 = ORIENTED_EDGE ('', *, *, #4320, .F.);
#4340 = CARTESIAN_POINT ('', (-29.4013203435596, 12., 16.));
#4350 = VERTEX_POINT ('', #4340);
#4360 = CARTESIAN_POINT ('', (-29.4013203435596, 12., 16.));
#4370 = CARTESIAN_POINT ('', (-29.9986796564404, 12., 16.));
#4380 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4360, #4370), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4390 = EDGE_CURVE ('', #4350, #4260, #4380, .T.);
#4400 = ORIENTED_EDGE ('', *, *, #4390, .F.);
#4410 = CARTESIAN_POINT ('', (-27.7, 13.983839246877, 14.2986796564404));
#4420 = VERTEX_POINT ('', #4410);
#4430 = CARTESIAN_POINT ('', (-27.7, 13.983839246877, 14.2986796564404));
#4440 = CARTESIAN_POINT ('', (-28.3099694281291, 13.360136607061, 14.9086490845694));
#4450 = CARTESIAN_POINT ('', (-28.8778851832775, 12.6979135470429, 15.4765648397178));
#4460 = CARTESIAN_POINT ('', (-29.4013203435596, 12., 16.));
#4470 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#4430, #4440, #4450, #4460), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#4480 = EDGE_CURVE ('', #4420, #4350, #4470, .T.);
#4490 = ORIENTED_EDGE ('', *, *, #4480, .F.);
#4500 = CARTESIAN_POINT ('', (-25.9986796564404, 12., 16.));
#4510 = VERTEX_POINT ('', #4500);
#4520 = CARTESIAN_POINT ('', (-25.9986796564404, 12., 16.));
#4530 = CARTESIAN_POINT ('', (-26.5221148167225, 12.6979135470429, 15.4765648397178));
#4540 = CARTESIAN_POINT ('', (-27.0900305718709, 13.3601366070611, 14.9086490845694));
#4550 = CARTESIAN_POINT ('', (-27.7, 13.983839246877, 14.2986796564404));
#4560 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#4520, #4530, #4540, #4550), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#4570 = EDGE_CURVE ('', #4510, #4420, #4560, .T.);
#4580 = ORIENTED_EDGE ('', *, *, #4570, .F.);
#4590 = CARTESIAN_POINT ('', (-25.4013203435596, 12., 16.));
#4600 = VERTEX_POINT ('', #4590);
#4610 = CARTESIAN_POINT ('', (-25.4013203435596, 12., 16.));
#4620 = CARTESIAN_POINT ('', (-25.9986796564404, 12., 16.));
#4630 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4610, #4620), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4640 = EDGE_CURVE ('', #4600, #4510, #4630, .T.);
#4650 = ORIENTED_EDGE ('', *, *, #4640, .F.);
#4660 = CARTESIAN_POINT ('', (-23.7, 13.9838392468771, 14.2986796564404));
#4670 = VERTEX_POINT ('', #4660);
#4680 = CARTESIAN_POINT ('', (-23.7, 13.9838392468771, 14.2986796564404));
#4690 = CARTESIAN_POINT ('', (-24.3099694281291, 13.3601366070611, 14.9086490845694));
#4700 = CARTESIAN_POINT ('', (-24.8778851832775, 12.6979135470429, 15.4765648397178));
#4710 = CARTESIAN_POINT ('', (-25.4013203435596, 12., 16.));
#4720 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#4680, #4690, #4700, #4710), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#4730 = EDGE_CURVE ('', #4670, #4600, #4720, .T.);
#4740 = ORIENTED_EDGE ('', *, *, #4730, .F.);
#4750 = CARTESIAN_POINT ('', (-21.9986796564404, 12., 16.));
#4760 = VERTEX_POINT ('', #4750);
#4770 = CARTESIAN_POINT ('', (-21.9986796564404, 12., 16.));
#4780 = CARTESIAN_POINT ('', (-22.5221148167225, 12.6979135470429, 15.4765648397178));
#4790 = CARTESIAN_POINT ('', (-23.0900305718709, 13.3601366070611, 14.9086490845694));
#4800 = CARTESIAN_POINT ('', (-23.7, 13.9838392468771, 14.2986796564404));
#4810 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#4770, #4780, #4790, #4800), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#4820 = EDGE_CURVE ('', #4760, #4670, #4810, .T.);
#4830 = ORIENTED_EDGE ('', *, *, #4820, .F.);
#4840 = CARTESIAN_POINT ('', (-21.4013203435596, 12., 16.));
#4850 = VERTEX_POINT ('', #4840);
#4860 = CARTESIAN_POINT ('', (-21.4013203435596, 12., 16.));
#4870 = CARTESIAN_POINT ('', (-21.9986796564404, 12., 16.));
#4880 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4860, #4870), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4890 = EDGE_CURVE ('', #4850, #4760, #4880, .T.);
#4900 = ORIENTED_EDGE ('', *, *, #4890, .F.);
#4910 = CARTESIAN_POINT ('', (-19.7, 13.9838392468771, 14.2986796564404));
#4920 = VERTEX_POINT ('', #4910);
#4930 = CARTESIAN_POINT ('', (-19.7, 13.9838392468771, 14.2986796564404));
#4940 = CARTESIAN_POINT ('', (-20.3099694281291, 13.3601366070611, 14.9086490845694));
#4950 = CARTESIAN_POINT ('', (-20.8778851832775, 12.6979135470429, 15.4765648397178));
#4960 = CARTESIAN_POINT ('', (-21.4013203435596, 12., 16.));
#4970 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#4930, #4940, #4950, #4960), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#4980 = EDGE_CURVE ('', #4920, #4850, #4970, .T.);
#4990 = ORIENTED_EDGE ('', *, *, #4980, .F.);
#5000 = CARTESIAN_POINT ('', (-17.9986796564404, 12., 16.));
#5010 = VERTEX_POINT ('', #5000);
#5020 = CARTESIAN_POINT ('', (-17.9986796564404, 12., 16.));
#5030 = CARTESIAN_POINT ('', (-18.5221148167225, 12.6979135470429, 15.4765648397178));
#5040 = CARTESIAN_POINT ('', (-19.0900305718709, 13.3601366070611, 14.9086490845694));
#5050 = CARTESIAN_POINT ('', (-19.7, 13.9838392468771, 14.2986796564404));
#5060 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#5020, #5030, #5040, #5050), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#5070 = EDGE_CURVE ('', #5010, #4920, #5060, .T.);
#5080 = ORIENTED_EDGE ('', *, *, #5070, .F.);
#5090 = CARTESIAN_POINT ('', (-17.4013203435596, 12., 16.));
#5100 = VERTEX_POINT ('', #5090);
#5110 = CARTESIAN_POINT ('', (-17.4013203435596, 12., 16.));
#5120 = CARTESIAN_POINT ('', (-17.9986796564404, 12., 16.));
#5130 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5110, #5120), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5140 = EDGE_CURVE ('', #5100, #5010, #5130, .T.);
#5150 = ORIENTED_EDGE ('', *, *, #5140, .F.);
#5160 = CARTESIAN_POINT ('', (-15.7, 13.9838392468771, 14.2986796564404));
#5170 = VERTEX_POINT ('', #5160);
#5180 = CARTESIAN_POINT ('', (-15.7, 13.9838392468771, 14.2986796564404));
#5190 = CARTESIAN_POINT ('', (-16.3099694281291, 13.360136607061, 14.9086490845694));
#5200 = CARTESIAN_POINT ('', (-16.8778851832775, 12.6979135470429, 15.4765648397178));
#5210 = CARTESIAN_POINT ('', (-17.4013203435596, 12., 16.));
#5220 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#5180, #5190, #5200, #5210), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#5230 = EDGE_CURVE ('', #5170, #5100, #5220, .T.);
#5240 = ORIENTED_EDGE ('', *, *, #5230, .F.);
#5250 = CARTESIAN_POINT ('', (-13.9986796564404, 12., 16.));
#5260 = VERTEX_POINT ('', #5250);
#5270 = CARTESIAN_POINT ('', (-13.9986796564404, 12., 16.));
#5280 = CARTESIAN_POINT ('', (-14.5221148167225, 12.6979135470429, 15.4765648397178));
#5290 = CARTESIAN_POINT ('', (-15.0900305718709, 13.3601366070611, 14.9086490845694));
#5300 = CARTESIAN_POINT ('', (-15.7, 13.9838392468771, 14.2986796564404));
#5310 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#5270, #5280, #5290, #5300), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#5320 = EDGE_CURVE ('', #5260, #5170, #5310, .T.);
#5330 = ORIENTED_EDGE ('', *, *, #5320, .F.);
#5340 = CARTESIAN_POINT ('', (-13.4013203435596, 12., 16.));
#5350 = VERTEX_POINT ('', #5340);
#5360 = CARTESIAN_POINT ('', (-13.4013203435596, 12., 16.));
#5370 = CARTESIAN_POINT ('', (-13.9986796564404, 12., 16.));
#5380 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5360, #5370), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5390 = EDGE_CURVE ('', #5350, #5260, #5380, .T.);
#5400 = ORIENTED_EDGE ('', *, *, #5390, .F.);
#5410 = CARTESIAN_POINT ('', (-11.7, 13.983839246877, 14.2986796564404));
#5420 = VERTEX_POINT ('', #5410);
#5430 = CARTESIAN_POINT ('', (-11.7, 13.983839246877, 14.2986796564404));
#5440 = CARTESIAN_POINT ('', (-12.3099694281291, 13.360136607061, 14.9086490845694));
#5450 = CARTESIAN_POINT ('', (-12.8778851832775, 12.6979135470429, 15.4765648397178));
#5460 = CARTESIAN_POINT ('', (-13.4013203435596, 12., 16.));
#5470 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#5430, #5440, #5450, #5460), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#5480 = EDGE_CURVE ('', #5420, #5350, #5470, .T.);
#5490 = ORIENTED_EDGE ('', *, *, #5480, .F.);
#5500 = CARTESIAN_POINT ('', (-9.99867965644037, 12., 16.));
#5510 = VERTEX_POINT ('', #5500);
#5520 = CARTESIAN_POINT ('', (-9.99867965644037, 12., 16.));
#5530 = CARTESIAN_POINT ('', (-10.5221148167225, 12.6979135470429, 15.4765648397178));
#5540 = CARTESIAN_POINT ('', (-11.0900305718709, 13.360136607061, 14.9086490845694));
#5550 = CARTESIAN_POINT ('', (-11.7, 13.983839246877, 14.2986796564404));
#5560 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#5520, #5530, #5540, #5550), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#5570 = EDGE_CURVE ('', #5510, #5420, #5560, .T.);
#5580 = ORIENTED_EDGE ('', *, *, #5570, .F.);
#5590 = CARTESIAN_POINT ('', (-7., 12., 16.));
#5600 = VERTEX_POINT ('', #5590);
#5610 = CARTESIAN_POINT ('', (-7., 12., 16.));
#5620 = CARTESIAN_POINT ('', (-9.99867965644037, 12., 16.));
#5630 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5610, #5620), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5640 = EDGE_CURVE ('', #5600, #5510, #5630, .T.);
#5650 = ORIENTED_EDGE ('', *, *, #5640, .F.);
#5660 = CARTESIAN_POINT ('', (-7., -12., 16.));
#5670 = VERTEX_POINT ('', #5660);
#5680 = CARTESIAN_POINT ('', (-7., -12., 16.));
#5690 = CARTESIAN_POINT ('', (-7., -5.4806039165027E-15, 25.));
#5700 = CARTESIAN_POINT ('', (-7., 12., 16.));
#5710 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5680, #5690, #5700), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (233.130102354156, 306.869897645844), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.8, 1.))
   REPRESENTATION_ITEM ('')
);
#5720 = EDGE_CURVE ('', #5670, #5600, #5710, .T.);
#5730 = ORIENTED_EDGE ('', *, *, #5720, .F.);
#5740 = CARTESIAN_POINT ('', (-9.99867965644037, -12., 16.));
#5750 = VERTEX_POINT ('', #5740);
#5760 = CARTESIAN_POINT ('', (-9.99867965644037, -12., 16.));
#5770 = CARTESIAN_POINT ('', (-7., -12., 16.));
#5780 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5760, #5770), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5790 = EDGE_CURVE ('', #5750, #5670, #5780, .T.);
#5800 = ORIENTED_EDGE ('', *, *, #5790, .F.);
#5810 = CARTESIAN_POINT ('', (-11.7, -13.983839246877, 14.2986796564404));
#5820 = VERTEX_POINT ('', #5810);
#5830 = CARTESIAN_POINT ('', (-11.7, -13.983839246877, 14.2986796564404));
#5840 = CARTESIAN_POINT ('', (-11.0900305718709, -13.360136607061, 14.9086490845694));
#5850 = CARTESIAN_POINT ('', (-10.5221148167225, -12.6979135470429, 15.4765648397178));
#5860 = CARTESIAN_POINT ('', (-9.99867965644037, -12., 16.));
#5870 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#5830, #5840, #5850, #5860), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#5880 = EDGE_CURVE ('', #5820, #5750, #5870, .T.);
#5890 = ORIENTED_EDGE ('', *, *, #5880, .F.);
#5900 = CARTESIAN_POINT ('', (-13.4013203435596, -12., 16.));
#5910 = VERTEX_POINT ('', #5900);
#5920 = CARTESIAN_POINT ('', (-13.4013203435596, -12., 16.));
#5930 = CARTESIAN_POINT ('', (-12.8778851832775, -12.6979135470429, 15.4765648397178));
#5940 = CARTESIAN_POINT ('', (-12.3099694281291, -13.360136607061, 14.9086490845695));
#5950 = CARTESIAN_POINT ('', (-11.7, -13.983839246877, 14.2986796564404));
#5960 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#5920, #5930, #5940, #5950), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#5970 = EDGE_CURVE ('', #5910, #5820, #5960, .T.);
#5980 = ORIENTED_EDGE ('', *, *, #5970, .F.);
#5990 = CARTESIAN_POINT ('', (-13.9986796564404, -12., 16.));
#6000 = VERTEX_POINT ('', #5990);
#6010 = CARTESIAN_POINT ('', (-13.9986796564404, -12., 16.));
#6020 = CARTESIAN_POINT ('', (-13.4013203435596, -12., 16.));
#6030 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6010, #6020), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6040 = EDGE_CURVE ('', #6000, #5910, #6030, .T.);
#6050 = ORIENTED_EDGE ('', *, *, #6040, .F.);
#6060 = CARTESIAN_POINT ('', (-15.7, -13.983839246877, 14.2986796564404));
#6070 = VERTEX_POINT ('', #6060);
#6080 = CARTESIAN_POINT ('', (-15.7, -13.983839246877, 14.2986796564404));
#6090 = CARTESIAN_POINT ('', (-15.0900305718709, -13.360136607061, 14.9086490845694));
#6100 = CARTESIAN_POINT ('', (-14.5221148167225, -12.6979135470429, 15.4765648397178));
#6110 = CARTESIAN_POINT ('', (-13.9986796564404, -12., 16.));
#6120 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#6080, #6090, #6100, #6110), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#6130 = EDGE_CURVE ('', #6070, #6000, #6120, .T.);
#6140 = ORIENTED_EDGE ('', *, *, #6130, .F.);
#6150 = CARTESIAN_POINT ('', (-17.4013203435596, -12., 16.));
#6160 = VERTEX_POINT ('', #6150);
#6170 = CARTESIAN_POINT ('', (-17.4013203435596, -12., 16.));
#6180 = CARTESIAN_POINT ('', (-16.8778851832775, -12.6979135470429, 15.4765648397178));
#6190 = CARTESIAN_POINT ('', (-16.3099694281291, -13.360136607061, 14.9086490845694));
#6200 = CARTESIAN_POINT ('', (-15.7, -13.983839246877, 14.2986796564404));
#6210 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#6170, #6180, #6190, #6200), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#6220 = EDGE_CURVE ('', #6160, #6070, #6210, .T.);
#6230 = ORIENTED_EDGE ('', *, *, #6220, .F.);
#6240 = CARTESIAN_POINT ('', (-17.9986796564404, -12., 16.));
#6250 = VERTEX_POINT ('', #6240);
#6260 = CARTESIAN_POINT ('', (-17.9986796564404, -12., 16.));
#6270 = CARTESIAN_POINT ('', (-17.4013203435596, -12., 16.));
#6280 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6260, #6270), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6290 = EDGE_CURVE ('', #6250, #6160, #6280, .T.);
#6300 = ORIENTED_EDGE ('', *, *, #6290, .F.);
#6310 = CARTESIAN_POINT ('', (-19.7, -13.983839246877, 14.2986796564404));
#6320 = VERTEX_POINT ('', #6310);
#6330 = CARTESIAN_POINT ('', (-19.7, -13.983839246877, 14.2986796564404));
#6340 = CARTESIAN_POINT ('', (-19.0900305718709, -13.360136607061, 14.9086490845694));
#6350 = CARTESIAN_POINT ('', (-18.5221148167225, -12.6979135470429, 15.4765648397178));
#6360 = CARTESIAN_POINT ('', (-17.9986796564404, -12., 16.));
#6370 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#6330, #6340, #6350, #6360), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#6380 = EDGE_CURVE ('', #6320, #6250, #6370, .T.);
#6390 = ORIENTED_EDGE ('', *, *, #6380, .F.);
#6400 = CARTESIAN_POINT ('', (-21.4013203435596, -12., 16.));
#6410 = VERTEX_POINT ('', #6400);
#6420 = CARTESIAN_POINT ('', (-21.4013203435596, -12., 16.));
#6430 = CARTESIAN_POINT ('', (-20.8778851832775, -12.6979135470429, 15.4765648397178));
#6440 = CARTESIAN_POINT ('', (-20.3099694281291, -13.360136607061, 14.9086490845694));
#6450 = CARTESIAN_POINT ('', (-19.7, -13.983839246877, 14.2986796564404));
#6460 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#6420, #6430, #6440, #6450), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#6470 = EDGE_CURVE ('', #6410, #6320, #6460, .T.);
#6480 = ORIENTED_EDGE ('', *, *, #6470, .F.);
#6490 = CARTESIAN_POINT ('', (-21.9986796564404, -12., 16.));
#6500 = VERTEX_POINT ('', #6490);
#6510 = CARTESIAN_POINT ('', (-21.9986796564404, -12., 16.));
#6520 = CARTESIAN_POINT ('', (-21.4013203435596, -12., 16.));
#6530 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6510, #6520), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6540 = EDGE_CURVE ('', #6500, #6410, #6530, .T.);
#6550 = ORIENTED_EDGE ('', *, *, #6540, .F.);
#6560 = CARTESIAN_POINT ('', (-23.7, -13.983839246877, 14.2986796564404));
#6570 = VERTEX_POINT ('', #6560);
#6580 = CARTESIAN_POINT ('', (-23.7, -13.983839246877, 14.2986796564404));
#6590 = CARTESIAN_POINT ('', (-23.0900305718709, -13.360136607061, 14.9086490845694));
#6600 = CARTESIAN_POINT ('', (-22.5221148167225, -12.6979135470429, 15.4765648397178));
#6610 = CARTESIAN_POINT ('', (-21.9986796564404, -12., 16.));
#6620 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#6580, #6590, #6600, #6610), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#6630 = EDGE_CURVE ('', #6570, #6500, #6620, .T.);
#6640 = ORIENTED_EDGE ('', *, *, #6630, .F.);
#6650 = CARTESIAN_POINT ('', (-25.4013203435596, -12., 16.));
#6660 = VERTEX_POINT ('', #6650);
#6670 = CARTESIAN_POINT ('', (-25.4013203435596, -12., 16.));
#6680 = CARTESIAN_POINT ('', (-24.8778851832775, -12.6979135470429, 15.4765648397178));
#6690 = CARTESIAN_POINT ('', (-24.3099694281291, -13.360136607061, 14.9086490845694));
#6700 = CARTESIAN_POINT ('', (-23.7, -13.983839246877, 14.2986796564404));
#6710 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#6670, #6680, #6690, #6700), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#6720 = EDGE_CURVE ('', #6660, #6570, #6710, .T.);
#6730 = ORIENTED_EDGE ('', *, *, #6720, .F.);
#6740 = CARTESIAN_POINT ('', (-25.9986796564404, -12., 16.));
#6750 = VERTEX_POINT ('', #6740);
#6760 = CARTESIAN_POINT ('', (-25.9986796564404, -12., 16.));
#6770 = CARTESIAN_POINT ('', (-25.4013203435596, -12., 16.));
#6780 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6760, #6770), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6790 = EDGE_CURVE ('', #6750, #6660, #6780, .T.);
#6800 = ORIENTED_EDGE ('', *, *, #6790, .F.);
#6810 = CARTESIAN_POINT ('', (-27.7, -13.983839246877, 14.2986796564404));
#6820 = VERTEX_POINT ('', #6810);
#6830 = CARTESIAN_POINT ('', (-27.7, -13.983839246877, 14.2986796564404));
#6840 = CARTESIAN_POINT ('', (-27.0900305718709, -13.360136607061, 14.9086490845694));
#6850 = CARTESIAN_POINT ('', (-26.5221148167225, -12.6979135470429, 15.4765648397178));
#6860 = CARTESIAN_POINT ('', (-25.9986796564404, -12., 16.));
#6870 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#6830, #6840, #6850, #6860), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#6880 = EDGE_CURVE ('', #6820, #6750, #6870, .T.);
#6890 = ORIENTED_EDGE ('', *, *, #6880, .F.);
#6900 = CARTESIAN_POINT ('', (-29.4013203435596, -12., 16.));
#6910 = VERTEX_POINT ('', #6900);
#6920 = CARTESIAN_POINT ('', (-29.4013203435596, -12., 16.));
#6930 = CARTESIAN_POINT ('', (-28.8778851832775, -12.6979135470429, 15.4765648397178));
#6940 = CARTESIAN_POINT ('', (-28.3099694281291, -13.360136607061, 14.9086490845695));
#6950 = CARTESIAN_POINT ('', (-27.7, -13.983839246877, 14.2986796564404));
#6960 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#6920, #6930, #6940, #6950), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#6970 = EDGE_CURVE ('', #6910, #6820, #6960, .T.);
#6980 = ORIENTED_EDGE ('', *, *, #6970, .F.);
#6990 = CARTESIAN_POINT ('', (-29.9986796564404, -12., 16.));
#7000 = VERTEX_POINT ('', #6990);
#7010 = CARTESIAN_POINT ('', (-29.9986796564404, -12., 16.));
#7020 = CARTESIAN_POINT ('', (-29.4013203435596, -12., 16.));
#7030 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7010, #7020), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#7040 = EDGE_CURVE ('', #7000, #6910, #7030, .T.);
#7050 = ORIENTED_EDGE ('', *, *, #7040, .F.);
#7060 = CARTESIAN_POINT ('', (-31.7, -13.983839246877, 14.2986796564404));
#7070 = VERTEX_POINT ('', #7060);
#7080 = CARTESIAN_POINT ('', (-31.7, -13.983839246877, 14.2986796564404));
#7090 = CARTESIAN_POINT ('', (-31.0900305718709, -13.360136607061, 14.9086490845694));
#7100 = CARTESIAN_POINT ('', (-30.5221148167225, -12.6979135470429, 15.4765648397178));
#7110 = CARTESIAN_POINT ('', (-29.9986796564404, -12., 16.));
#7120 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#7080, #7090, #7100, #7110), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#7130 = EDGE_CURVE ('', #7070, #7000, #7120, .T.);
#7140 = ORIENTED_EDGE ('', *, *, #7130, .F.);
#7150 = CARTESIAN_POINT ('', (-33.4013203435596, -12., 16.));
#7160 = VERTEX_POINT ('', #7150);
#7170 = CARTESIAN_POINT ('', (-33.4013203435596, -12., 16.));
#7180 = CARTESIAN_POINT ('', (-32.8778851832775, -12.6979135470429, 15.4765648397178));
#7190 = CARTESIAN_POINT ('', (-32.3099694281291, -13.360136607061, 14.9086490845694));
#7200 = CARTESIAN_POINT ('', (-31.7, -13.983839246877, 14.2986796564404));
#7210 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#7170, #7180, #7190, #7200), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#7220 = EDGE_CURVE ('', #7160, #7070, #7210, .T.);
#7230 = ORIENTED_EDGE ('', *, *, #7220, .F.);
#7240 = CARTESIAN_POINT ('', (-33.9986796564404, -12., 16.));
#7250 = VERTEX_POINT ('', #7240);
#7260 = CARTESIAN_POINT ('', (-33.9986796564404, -12., 16.));
#7270 = CARTESIAN_POINT ('', (-33.4013203435596, -12., 16.));
#7280 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7260, #7270), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#7290 = EDGE_CURVE ('', #7250, #7160, #7280, .T.);
#7300 = ORIENTED_EDGE ('', *, *, #7290, .F.);
#7310 = CARTESIAN_POINT ('', (-35.7, -13.983839246877, 14.2986796564404));
#7320 = VERTEX_POINT ('', #7310);
#7330 = CARTESIAN_POINT ('', (-35.7, -13.983839246877, 14.2986796564404));
#7340 = CARTESIAN_POINT ('', (-35.0900305718709, -13.360136607061, 14.9086490845694));
#7350 = CARTESIAN_POINT ('', (-34.5221148167225, -12.6979135470429, 15.4765648397178));
#7360 = CARTESIAN_POINT ('', (-33.9986796564404, -12., 16.));
#7370 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#7330, #7340, #7350, #7360), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#7380 = EDGE_CURVE ('', #7320, #7250, #7370, .T.);
#7390 = ORIENTED_EDGE ('', *, *, #7380, .F.);
#7400 = CARTESIAN_POINT ('', (-37.4013203435596, -12., 16.));
#7410 = VERTEX_POINT ('', #7400);
#7420 = CARTESIAN_POINT ('', (-37.4013203435596, -12., 16.));
#7430 = CARTESIAN_POINT ('', (-36.8778851832775, -12.6979135470429, 15.4765648397178));
#7440 = CARTESIAN_POINT ('', (-36.3099694281291, -13.360136607061, 14.9086490845694));
#7450 = CARTESIAN_POINT ('', (-35.7, -13.983839246877, 14.2986796564404));
#7460 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#7420, #7430, #7440, #7450), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#7470 = EDGE_CURVE ('', #7410, #7320, #7460, .T.);
#7480 = ORIENTED_EDGE ('', *, *, #7470, .F.);
#7490 = CARTESIAN_POINT ('', (-37.9986796564404, -12., 16.));
#7500 = VERTEX_POINT ('', #7490);
#7510 = CARTESIAN_POINT ('', (-37.9986796564404, -12., 16.));
#7520 = CARTESIAN_POINT ('', (-37.4013203435596, -12., 16.));
#7530 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7510, #7520), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#7540 = EDGE_CURVE ('', #7500, #7410, #7530, .T.);
#7550 = ORIENTED_EDGE ('', *, *, #7540, .F.);
#7560 = CARTESIAN_POINT ('', (-39.7, -13.983839246877, 14.2986796564404));
#7570 = VERTEX_POINT ('', #7560);
#7580 = CARTESIAN_POINT ('', (-39.7, -13.983839246877, 14.2986796564404));
#7590 = CARTESIAN_POINT ('', (-39.0900305718709, -13.360136607061, 14.9086490845694));
#7600 = CARTESIAN_POINT ('', (-38.5221148167225, -12.6979135470429, 15.4765648397178));
#7610 = CARTESIAN_POINT ('', (-37.9986796564404, -12., 16.));
#7620 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#7580, #7590, #7600, #7610), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#7630 = EDGE_CURVE ('', #7570, #7500, #7620, .T.);
#7640 = ORIENTED_EDGE ('', *, *, #7630, .F.);
#7650 = CARTESIAN_POINT ('', (-41.4013203435596, -12., 16.));
#7660 = VERTEX_POINT ('', #7650);
#7670 = CARTESIAN_POINT ('', (-41.4013203435596, -12., 16.));
#7680 = CARTESIAN_POINT ('', (-40.8778851832775, -12.6979135470429, 15.4765648397178));
#7690 = CARTESIAN_POINT ('', (-40.3099694281291, -13.360136607061, 14.9086490845694));
#7700 = CARTESIAN_POINT ('', (-39.7, -13.983839246877, 14.2986796564404));
#7710 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#7670, #7680, #7690, #7700), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#7720 = EDGE_CURVE ('', #7660, #7570, #7710, .T.);
#7730 = ORIENTED_EDGE ('', *, *, #7720, .F.);
#7740 = CARTESIAN_POINT ('', (-41.9986796564404, -12., 16.));
#7750 = VERTEX_POINT ('', #7740);
#7760 = CARTESIAN_POINT ('', (-41.9986796564404, -12., 16.));
#7770 = CARTESIAN_POINT ('', (-41.4013203435596, -12., 16.));
#7780 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7760, #7770), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#7790 = EDGE_CURVE ('', #7750, #7660, #7780, .T.);
#7800 = ORIENTED_EDGE ('', *, *, #7790, .F.);
#7810 = CARTESIAN_POINT ('', (-43.7, -13.983839246877, 14.2986796564404));
#7820 = VERTEX_POINT ('', #7810);
#7830 = CARTESIAN_POINT ('', (-43.7, -13.983839246877, 14.2986796564404));
#7840 = CARTESIAN_POINT ('', (-43.0900305718709, -13.360136607061, 14.9086490845694));
#7850 = CARTESIAN_POINT ('', (-42.5221148167225, -12.6979135470429, 15.4765648397178));
#7860 = CARTESIAN_POINT ('', (-41.9986796564404, -12., 16.));
#7870 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#7830, #7840, #7850, #7860), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#7880 = EDGE_CURVE ('', #7820, #7750, #7870, .T.);
#7890 = ORIENTED_EDGE ('', *, *, #7880, .F.);
#7900 = CARTESIAN_POINT ('', (-45.4013203435596, -12., 16.));
#7910 = VERTEX_POINT ('', #7900);
#7920 = CARTESIAN_POINT ('', (-45.4013203435596, -12., 16.));
#7930 = CARTESIAN_POINT ('', (-44.8778851832775, -12.6979135470429, 15.4765648397178));
#7940 = CARTESIAN_POINT ('', (-44.3099694281291, -13.360136607061, 14.9086490845694));
#7950 = CARTESIAN_POINT ('', (-43.7, -13.983839246877, 14.2986796564404));
#7960 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#7920, #7930, #7940, #7950), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#7970 = EDGE_CURVE ('', #7910, #7820, #7960, .T.);
#7980 = ORIENTED_EDGE ('', *, *, #7970, .F.);
#7990 = CARTESIAN_POINT ('', (-45.9986796564404, -12., 16.));
#8000 = VERTEX_POINT ('', #7990);
#8010 = CARTESIAN_POINT ('', (-45.9986796564404, -12., 16.));
#8020 = CARTESIAN_POINT ('', (-45.4013203435596, -12., 16.));
#8030 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8010, #8020), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#8040 = EDGE_CURVE ('', #8000, #7910, #8030, .T.);
#8050 = ORIENTED_EDGE ('', *, *, #8040, .F.);
#8060 = CARTESIAN_POINT ('', (-47.7, -13.983839246877, 14.2986796564404));
#8070 = VERTEX_POINT ('', #8060);
#8080 = CARTESIAN_POINT ('', (-47.7, -13.983839246877, 14.2986796564404));
#8090 = CARTESIAN_POINT ('', (-47.0900305718709, -13.360136607061, 14.9086490845694));
#8100 = CARTESIAN_POINT ('', (-46.5221148167225, -12.6979135470429, 15.4765648397178));
#8110 = CARTESIAN_POINT ('', (-45.9986796564404, -12., 16.));
#8120 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#8080, #8090, #8100, #8110), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#8130 = EDGE_CURVE ('', #8070, #8000, #8120, .T.);
#8140 = ORIENTED_EDGE ('', *, *, #8130, .F.);
#8150 = CARTESIAN_POINT ('', (-49.4013203435596, -12., 16.));
#8160 = VERTEX_POINT ('', #8150);
#8170 = CARTESIAN_POINT ('', (-49.4013203435596, -12., 16.));
#8180 = CARTESIAN_POINT ('', (-48.8778851832775, -12.6979135470429, 15.4765648397178));
#8190 = CARTESIAN_POINT ('', (-48.3099694281291, -13.360136607061, 14.9086490845694));
#8200 = CARTESIAN_POINT ('', (-47.7, -13.983839246877, 14.2986796564404));
#8210 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#8170, #8180, #8190, #8200), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.998575538793357, 0.998575538793357, 1.))
   REPRESENTATION_ITEM ('')
);
#8220 = EDGE_CURVE ('', #8160, #8070, #8210, .T.);
#8230 = ORIENTED_EDGE ('', *, *, #8220, .F.);
#8240 = CARTESIAN_POINT ('', (-59.500000274339, -12., 16.));
#8250 = VERTEX_POINT ('', #8240);
#8260 = CARTESIAN_POINT ('', (-59.500000274339, -12., 16.));
#8270 = CARTESIAN_POINT ('', (-49.4013203435596, -12., 16.));
#8280 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8260, #8270), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#8290 = EDGE_CURVE ('', #8250, #8160, #8280, .T.);
#8300 = ORIENTED_EDGE ('', *, *, #8290, .F.);
#8310 = CARTESIAN_POINT ('', (-59.500000274339, -12., 16.));
#8320 = CARTESIAN_POINT ('', (-59.500000274339, -20., 10.));
#8330 = CARTESIAN_POINT ('', (-59.500000274339, -20., -6.70904052638622E-15));
#8340 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#8310, #8320, #8330), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (126.869897645844, 179.561835621107), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.861021337825003, 0.926697180237448))
   REPRESENTATION_ITEM ('')
);
#8350 = EDGE_CURVE ('', #8250, #2360, #8340, .T.);
#8360 = ORIENTED_EDGE ('', *, *, #8350, .T.);
#8370 = ORIENTED_EDGE ('', *, *, #3060, .F.);
#8380 = CARTESIAN_POINT ('', (0., 20., 3.67394039744206E-15));
#8390 = VERTEX_POINT ('', #8380);
#8400 = CARTESIAN_POINT ('', (0., 20., 3.67394039744206E-15));
#8410 = CARTESIAN_POINT ('', (0., 20., 20.));
#8420 = CARTESIAN_POINT ('', (0., -2.44929359829471E-15, 20.));
#8430 = CARTESIAN_POINT ('', (0., -20., 20.));
#8440 = CARTESIAN_POINT ('', (0., -20., -1.22464679914735E-15));
#8450 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#8400, #8410, #8420, #8430, #8440), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 90., 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#8460 = EDGE_CURVE ('', #8390, #3020, #8450, .T.);
#8470 = ORIENTED_EDGE ('', *, *, #8460, .F.);
#8480 = CARTESIAN_POINT ('', (0., -20., -1.22464679914735E-15));
#8490 = CARTESIAN_POINT ('', (0., -20., -20.));
#8500 = CARTESIAN_POINT ('', (0., 3.94430452610506E-31, -20.));
#8510 = CARTESIAN_POINT ('', (0., 20., -20.));
#8520 = CARTESIAN_POINT ('', (0., 20., 3.67394039744206E-15));
#8530 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#8480, #8490, #8500, #8510, #8520), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#8540 = EDGE_CURVE ('', #3020, #8390, #8530, .T.);
#8550 = ORIENTED_EDGE ('', *, *, #8540, .F.);
#8560 = EDGE_LOOP ('', (#3070, #3080, #3150, #3240, #3330, #3400, #3490, #3580, #3650, #3740, #3830, #3900, #3990, #4080, #4150, #4240, #4330, #4400, #4490, #4580, #4650, #4740, #4830, #4900, #4990, #5080, #5150, #5240, #5330, #5400, #5490, #5580, #5650, #5730, #5800, #5890, #5980, #6050, #6140, #6230, #6300, #6390, #6480, #6550, #6640, #6730, #6800, #6890, #6980, #7050, #7140, #7230, #7300, #7390, #7480, #7550, #7640, #7730, #7800, #7890, #7980, #8050, #8140, #8230, #8300, #8360, #8370, #8470, #8550));
#8570 = FACE_OUTER_BOUND ('', #8560, .T.);
#8580 = CARTESIAN_POINT ('', (-65.4512003017729, -20., -3.67394039744206E-15));
#8590 = CARTESIAN_POINT ('', (5.9512000274339, -20., -3.67394039744206E-15));
#8600 = CARTESIAN_POINT ('', (-65.4512003017729, -20., -20.));
#8610 = CARTESIAN_POINT ('', (5.9512000274339, -20., -20.));
#8620 = CARTESIAN_POINT ('', (-65.4512003017729, -2.15241660805669E-16, -20.));
#8630 = CARTESIAN_POINT ('', (5.9512000274339, -2.15241660805669E-16, -20.));
#8640 = CARTESIAN_POINT ('', (-65.4512003017729, 20., -20.));
#8650 = CARTESIAN_POINT ('', (5.9512000274339, 20., -20.));
#8660 = CARTESIAN_POINT ('', (-65.4512003017729, 20., -2.32806687965315E-15));
#8670 = CARTESIAN_POINT ('', (5.9512000274339, 20., -2.32806687965315E-15));
#8680 = CARTESIAN_POINT ('', (-65.4512003017729, 20., 20.));
#8690 = CARTESIAN_POINT ('', (5.9512000274339, 20., 20.));
#8700 = CARTESIAN_POINT ('', (-65.4512003017729, 8.88178419700125E-16, 20.));
#8710 = CARTESIAN_POINT ('', (5.9512000274339, 8.88178419700125E-16, 20.));
#8720 = CARTESIAN_POINT ('', (-65.4512003017729, -20., 20.));
#8730 = CARTESIAN_POINT ('', (5.9512000274339, -20., 20.));
#8740 = CARTESIAN_POINT ('', (-65.4512003017729, -20., -3.67394039744206E-15));
#8750 = CARTESIAN_POINT ('', (5.9512000274339, -20., -3.67394039744206E-15));
#8760 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#8580, #8590), (#8600, #8610), (#8620, #8630), (#8640, #8650), (#8660, #8670), (#8680, #8690), (#8700, #8710), (#8720, #8730), (#8740, #8750)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#8770 = ADVANCED_FACE ('', (#8570), #8760, .T.);
#8780 = CARTESIAN_POINT ('', (34.5, 9.50000000000002, -25.));
#8790 = VERTEX_POINT ('', #8780);
#8800 = CARTESIAN_POINT ('', (34.5, 9.50000000000001, -48.));
#8810 = CARTESIAN_POINT ('', (34.5, 9.50000000000001, -25.));
#8820 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8800, #8810), .UNSPECIFIED., .F., .U., (2, 2), (0.0833695620670665, 0.916630437932933), .UNSPECIFIED.);
#8830 = EDGE_CURVE ('', #980, #8790, #8820, .T.);
#8840 = ORIENTED_EDGE ('', *, *, #8830, .T.);
#8850 = CARTESIAN_POINT ('', (34.5, 9.50000000000001, -25.));
#8860 = CARTESIAN_POINT ('', (32., 9.50000000000001, -25.));
#8870 = CARTESIAN_POINT ('', (32., 12., -25.));
#8880 = CARTESIAN_POINT ('', (32., 14.5, -25.));
#8890 = CARTESIAN_POINT ('', (34.5, 14.5, -25.));
#8900 = CARTESIAN_POINT ('', (37., 14.5, -25.));
#8910 = CARTESIAN_POINT ('', (37., 12., -25.));
#8920 = CARTESIAN_POINT ('', (37., 9.50000000000001, -25.));
#8930 = CARTESIAN_POINT ('', (34.5, 9.50000000000001, -25.));
#8940 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#8850, #8860, #8870, #8880, #8890, #8900, #8910, #8920, #8930), .UNSPECIFIED., .T., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 2, 3), (0., 90., 180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#8950 = EDGE_CURVE ('', #8790, #8790, #8940, .T.);
#8960 = ORIENTED_EDGE ('', *, *, #8950, .F.);
#8970 = ORIENTED_EDGE ('', *, *, #8830, .F.);
#8980 = ORIENTED_EDGE ('', *, *, #1090, .F.);
#8990 = EDGE_LOOP ('', (#8840, #8960, #8970, #8980));
#9000 = FACE_OUTER_BOUND ('', #8990, .T.);
#9010 = CARTESIAN_POINT ('', (34.5, 9.50000000000001, -22.6988));
#9020 = CARTESIAN_POINT ('', (34.5, 9.50000000000001, -50.3012));
#9030 = CARTESIAN_POINT ('', (37., 9.50000000000001, -22.6988));
#9040 = CARTESIAN_POINT ('', (37., 9.50000000000001, -50.3012));
#9050 = CARTESIAN_POINT ('', (37., 12., -22.6988));
#9060 = CARTESIAN_POINT ('', (37., 12., -50.3012));
#9070 = CARTESIAN_POINT ('', (37., 14.5, -22.6988));
#9080 = CARTESIAN_POINT ('', (37., 14.5, -50.3012));
#9090 = CARTESIAN_POINT ('', (34.5, 14.5, -22.6988));
#9100 = CARTESIAN_POINT ('', (34.5, 14.5, -50.3012));
#9110 = CARTESIAN_POINT ('', (32., 14.5, -22.6988));
#9120 = CARTESIAN_POINT ('', (32., 14.5, -50.3012));
#9130 = CARTESIAN_POINT ('', (32., 12., -22.6988));
#9140 = CARTESIAN_POINT ('', (32., 12., -50.3012));
#9150 = CARTESIAN_POINT ('', (32., 9.50000000000001, -22.6988));
#9160 = CARTESIAN_POINT ('', (32., 9.50000000000001, -50.3012));
#9170 = CARTESIAN_POINT ('', (34.5, 9.50000000000001, -22.6988));
#9180 = CARTESIAN_POINT ('', (34.5, 9.50000000000001, -50.3012));
#9190 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#9010, #9020), (#9030, #9040), (#9050, #9060), (#9070, #9080), (#9090, #9100), (#9110, #9120), (#9130, #9140), (#9150, #9160), (#9170, #9180)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#9200 = ADVANCED_FACE ('', (#9000), #9190, .T.);
#9210 = CARTESIAN_POINT ('', (44., 42.5, -26.));
#9220 = VERTEX_POINT ('', #9210);
#9230 = CARTESIAN_POINT ('', (44., 42.5, -48.));
#9240 = CARTESIAN_POINT ('', (44., 42.5, -26.));
#9250 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9230, #9240), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9260 = EDGE_CURVE ('', #770, #9220, #9250, .T.);
#9270 = ORIENTED_EDGE ('', *, *, #9260, .T.);
#9280 = CARTESIAN_POINT ('', (44., -42.5, -26.));
#9290 = VERTEX_POINT ('', #9280);
#9300 = CARTESIAN_POINT ('', (44., 42.5, -26.));
#9310 = CARTESIAN_POINT ('', (44., -42.5, -26.));
#9320 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9300, #9310), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9330 = EDGE_CURVE ('', #9220, #9290, #9320, .T.);
#9340 = ORIENTED_EDGE ('', *, *, #9330, .T.);
#9350 = CARTESIAN_POINT ('', (44., -42.5, -35.));
#9360 = VERTEX_POINT ('', #9350);
#9370 = CARTESIAN_POINT ('', (44., -42.5, -26.));
#9380 = CARTESIAN_POINT ('', (44., -42.5, -35.));
#9390 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9370, #9380), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9400 = EDGE_CURVE ('', #9290, #9360, #9390, .T.);
#9410 = ORIENTED_EDGE ('', *, *, #9400, .T.);
#9420 = CARTESIAN_POINT ('', (44., -42.5, -35.));
#9430 = CARTESIAN_POINT ('', (44., 6.0166604983953, -48.));
#9440 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9420, #9430), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9450 = EDGE_CURVE ('', #9360, #840, #9440, .T.);
#9460 = ORIENTED_EDGE ('', *, *, #9450, .T.);
#9470 = ORIENTED_EDGE ('', *, *, #880, .T.);
#9480 = EDGE_LOOP ('', (#9270, #9340, #9410, #9460, #9470));
#9490 = FACE_OUTER_BOUND ('', #9480, .T.);
#9500 = CARTESIAN_POINT ('', (44., 42.501, -25.999));
#9510 = CARTESIAN_POINT ('', (44., 42.501, -48.001));
#9520 = CARTESIAN_POINT ('', (44., -42.501, -25.999));
#9530 = CARTESIAN_POINT ('', (44., -42.501, -48.001));
#9540 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#9500, #9510), (#9520, #9530)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-72.501, 12.501), (-22.001, 0.000999999999997669), .UNSPECIFIED.);
#9550 = ADVANCED_FACE ('', (#9490), #9540, .T.);
#9560 = ORIENTED_EDGE ('', *, *, #9330, .F.);
#9570 = CARTESIAN_POINT ('', (43., 42.5, -25.));
#9580 = VERTEX_POINT ('', #9570);
#9590 = CARTESIAN_POINT ('', (43., 42.5, -25.));
#9600 = CARTESIAN_POINT ('', (44., 42.5, -26.));
#9610 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9590, #9600), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9620 = EDGE_CURVE ('', #9580, #9220, #9610, .T.);
#9630 = ORIENTED_EDGE ('', *, *, #9620, .F.);
#9640 = CARTESIAN_POINT ('', (43., -42.5, -25.));
#9650 = VERTEX_POINT ('', #9640);
#9660 = CARTESIAN_POINT ('', (43., -42.5, -25.));
#9670 = CARTESIAN_POINT ('', (43., 42.5, -25.));
#9680 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9660, #9670), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9690 = EDGE_CURVE ('', #9650, #9580, #9680, .T.);
#9700 = ORIENTED_EDGE ('', *, *, #9690, .F.);
#9710 = CARTESIAN_POINT ('', (44., -42.5, -26.));
#9720 = CARTESIAN_POINT ('', (43., -42.5, -25.));
#9730 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9710, #9720), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9740 = EDGE_CURVE ('', #9290, #9650, #9730, .T.);
#9750 = ORIENTED_EDGE ('', *, *, #9740, .F.);
#9760 = EDGE_LOOP ('', (#9560, #9630, #9700, #9750));
#9770 = FACE_OUTER_BOUND ('', #9760, .T.);
#9780 = CARTESIAN_POINT ('', (42.999, -42.501, -24.999));
#9790 = CARTESIAN_POINT ('', (42.999, 42.501, -24.999));
#9800 = CARTESIAN_POINT ('', (44.001, -42.501, -26.001));
#9810 = CARTESIAN_POINT ('', (44.001, 42.501, -26.001));
#9820 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#9780, #9790), (#9800, #9810)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1.41562777593547, 0.00141421356237714), (-72.501, 12.501), .UNSPECIFIED.);
#9830 = ADVANCED_FACE ('', (#9770), #9820, .T.);
#9840 = CARTESIAN_POINT ('', (24., -42.5, -25.));
#9850 = VERTEX_POINT ('', #9840);
#9860 = CARTESIAN_POINT ('', (43., -42.5, -25.));
#9870 = CARTESIAN_POINT ('', (24., -42.5, -25.));
#9880 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9860, #9870), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9890 = EDGE_CURVE ('', #9650, #9850, #9880, .T.);
#9900 = ORIENTED_EDGE ('', *, *, #9890, .F.);
#9910 = ORIENTED_EDGE ('', *, *, #9690, .T.);
#9920 = CARTESIAN_POINT ('', (24., 42.5, -25.));
#9930 = VERTEX_POINT ('', #9920);
#9940 = CARTESIAN_POINT ('', (43., 42.5, -25.));
#9950 = CARTESIAN_POINT ('', (24., 42.5, -25.));
#9960 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9940, #9950), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9970 = EDGE_CURVE ('', #9580, #9930, #9960, .T.);
#9980 = ORIENTED_EDGE ('', *, *, #9970, .T.);
#9990 = CARTESIAN_POINT ('', (24., 42.5, -25.));
#10000 = CARTESIAN_POINT ('', (24., -42.5, -25.));
#10010 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9990, #10000), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10020 = EDGE_CURVE ('', #9930, #9850, #10010, .T.);
#10030 = ORIENTED_EDGE ('', *, *, #10020, .T.);
#10040 = EDGE_LOOP ('', (#9900, #9910, #9980, #10030));
#10050 = FACE_OUTER_BOUND ('', #10040, .T.);
#10060 = ORIENTED_EDGE ('', *, *, #8950, .T.);
#10070 = EDGE_LOOP ('', (#10060));
#10080 = FACE_BOUND ('', #10070, .T.);
#10090 = CARTESIAN_POINT ('', (43.001, -42.501, -25.));
#10100 = CARTESIAN_POINT ('', (23.999, -42.501, -25.));
#10110 = CARTESIAN_POINT ('', (43.001, 42.501, -25.));
#10120 = CARTESIAN_POINT ('', (23.999, 42.501, -25.));
#10130 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#10090, #10100), (#10110, #10120)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-85.001, 0.000999999999997669), (92.546801721287, 111.548801721287), .UNSPECIFIED.);
#10140 = ADVANCED_FACE ('', (#10050, #10080), #10130, .T.);
#10150 = CARTESIAN_POINT ('', (0.300000000000002, 30., 32.5));
#10160 = VERTEX_POINT ('', #10150);
#10170 = CARTESIAN_POINT ('', (0.3, 30., 28.6749019178793));
#10180 = VERTEX_POINT ('', #10170);
#10190 = CARTESIAN_POINT ('', (0.300000000000002, 30., 32.5));
#10200 = CARTESIAN_POINT ('', (0.3, 30., 28.6749019178793));
#10210 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10190, #10200), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10220 = EDGE_CURVE ('', #10160, #10180, #10210, .T.);
#10230 = ORIENTED_EDGE ('', *, *, #10220, .F.);
#10240 = CARTESIAN_POINT ('', (44., 30., 32.5));
#10250 = VERTEX_POINT ('', #10240);
#10260 = CARTESIAN_POINT ('', (44., 30., 32.5));
#10270 = CARTESIAN_POINT ('', (0.300000000000004, 30., 32.5));
#10280 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10260, #10270), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10290 = EDGE_CURVE ('', #10250, #10160, #10280, .T.);
#10300 = ORIENTED_EDGE ('', *, *, #10290, .F.);
#10310 = CARTESIAN_POINT ('', (44., 30., 30.7499127341847));
#10320 = VERTEX_POINT ('', #10310);
#10330 = CARTESIAN_POINT ('', (44., 30., 30.7499127341847));
#10340 = CARTESIAN_POINT ('', (44., 30., 32.5));
#10350 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10330, #10340), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10360 = EDGE_CURVE ('', #10320, #10250, #10350, .T.);
#10370 = ORIENTED_EDGE ('', *, *, #10360, .F.);
#10380 = CARTESIAN_POINT ('', (36.5, 30., 30.7499127341847));
#10390 = VERTEX_POINT ('', #10380);
#10400 = CARTESIAN_POINT ('', (44., 30., 30.7499127341847));
#10410 = CARTESIAN_POINT ('', (36.5, 30., 30.7499127341847));
#10420 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10400, #10410), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10430 = EDGE_CURVE ('', #10320, #10390, #10420, .T.);
#10440 = ORIENTED_EDGE ('', *, *, #10430, .T.);
#10450 = CARTESIAN_POINT ('', (36.5, 30., 11.9496110848997));
#10460 = VERTEX_POINT ('', #10450);
#10470 = CARTESIAN_POINT ('', (36.5, 30., 11.9496110848997));
#10480 = CARTESIAN_POINT ('', (36.5, 30., 30.7499127341847));
#10490 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10470, #10480), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10500 = EDGE_CURVE ('', #10460, #10390, #10490, .T.);
#10510 = ORIENTED_EDGE ('', *, *, #10500, .F.);
#10520 = CARTESIAN_POINT ('', (44., 30., 11.9496110848997));
#10530 = VERTEX_POINT ('', #10520);
#10540 = CARTESIAN_POINT ('', (44., 30., 11.9496110848997));
#10550 = CARTESIAN_POINT ('', (36.5, 30., 11.9496110848997));
#10560 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10540, #10550), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10570 = EDGE_CURVE ('', #10530, #10460, #10560, .T.);
#10580 = ORIENTED_EDGE ('', *, *, #10570, .F.);
#10590 = CARTESIAN_POINT ('', (44., 30., 9.00000000000002));
#10600 = CARTESIAN_POINT ('', (44., 30., 11.9496110848997));
#10610 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10590, #10600), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10620 = EDGE_CURVE ('', #40, #10530, #10610, .T.);
#10630 = ORIENTED_EDGE ('', *, *, #10620, .F.);
#10640 = ORIENTED_EDGE ('', *, *, #80, .F.);
#10650 = CARTESIAN_POINT ('', (22., 30., -1.99999999999999));
#10660 = VERTEX_POINT ('', #10650);
#10670 = CARTESIAN_POINT ('', (22., 30., -1.99999999999999));
#10680 = CARTESIAN_POINT ('', (22., 30., 9.00000000000002));
#10690 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10670, #10680), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10700 = EDGE_CURVE ('', #10660, #20, #10690, .T.);
#10710 = ORIENTED_EDGE ('', *, *, #10700, .F.);
#10720 = CARTESIAN_POINT ('', (0., 30., -1.99999999999999));
#10730 = VERTEX_POINT ('', #10720);
#10740 = CARTESIAN_POINT ('', (22., 30., -1.99999999999999));
#10750 = CARTESIAN_POINT ('', (0., 30., -1.99999999999999));
#10760 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10740, #10750), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10770 = EDGE_CURVE ('', #10660, #10730, #10760, .T.);
#10780 = ORIENTED_EDGE ('', *, *, #10770, .T.);
#10790 = CARTESIAN_POINT ('', (0., 30., 28.6749019178793));
#10800 = VERTEX_POINT ('', #10790);
#10810 = CARTESIAN_POINT ('', (0., 30., -1.99999999999999));
#10820 = CARTESIAN_POINT ('', (0., 30., 28.6749019178793));
#10830 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10810, #10820), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10840 = EDGE_CURVE ('', #10730, #10800, #10830, .T.);
#10850 = ORIENTED_EDGE ('', *, *, #10840, .T.);
#10860 = CARTESIAN_POINT ('', (0.3, 30., 28.6749019178793));
#10870 = CARTESIAN_POINT ('', (0., 30., 28.6749019178793));
#10880 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10860, #10870), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10890 = EDGE_CURVE ('', #10180, #10800, #10880, .T.);
#10900 = ORIENTED_EDGE ('', *, *, #10890, .F.);
#10910 = EDGE_LOOP ('', (#10230, #10300, #10370, #10440, #10510, #10580, #10630, #10640, #10710, #10780, #10850, #10900));
#10920 = FACE_OUTER_BOUND ('', #10910, .T.);
#10930 = CARTESIAN_POINT ('', (44.001, 30., 32.501));
#10940 = CARTESIAN_POINT ('', (-0.000999999999997669, 30., 32.501));
#10950 = CARTESIAN_POINT ('', (44.001, 30., -2.001));
#10960 = CARTESIAN_POINT ('', (-0.000999999999997669, 30., -2.001));
#10970 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#10930, #10940), (#10950, #10960)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-34.501, 0.000999999999997669), (-0.000999999999997669, 44.001), .UNSPECIFIED.);
#10980 = ADVANCED_FACE ('', (#10920), #10970, .T.);
#10990 = ORIENTED_EDGE ('', *, *, #9400, .F.);
#11000 = ORIENTED_EDGE ('', *, *, #9740, .T.);
#11010 = ORIENTED_EDGE ('', *, *, #9890, .T.);
#11020 = CARTESIAN_POINT ('', (24., -42.5, -25.3));
#11030 = VERTEX_POINT ('', #11020);
#11040 = CARTESIAN_POINT ('', (24., -42.5, -25.3));
#11050 = CARTESIAN_POINT ('', (24., -42.5, -25.));
#11060 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11040, #11050), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11070 = EDGE_CURVE ('', #11030, #9850, #11060, .T.);
#11080 = ORIENTED_EDGE ('', *, *, #11070, .F.);
#11090 = CARTESIAN_POINT ('', (22., -42.5, -25.3));
#11100 = VERTEX_POINT ('', #11090);
#11110 = CARTESIAN_POINT ('', (22., -42.5, -25.3));
#11120 = CARTESIAN_POINT ('', (24., -42.5, -25.3));
#11130 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11110, #11120), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11140 = EDGE_CURVE ('', #11100, #11030, #11130, .T.);
#11150 = ORIENTED_EDGE ('', *, *, #11140, .F.);
#11160 = CARTESIAN_POINT ('', (22., -42.5, 8.99999999999999));
#11170 = CARTESIAN_POINT ('', (22., -42.5, -25.3));
#11180 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11160, #11170), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11190 = EDGE_CURVE ('', #180, #11100, #11180, .T.);
#11200 = ORIENTED_EDGE ('', *, *, #11190, .F.);
#11210 = ORIENTED_EDGE ('', *, *, #220, .F.);
#11220 = CARTESIAN_POINT ('', (44., -42.5, 30.));
#11230 = VERTEX_POINT ('', #11220);
#11240 = CARTESIAN_POINT ('', (44., -42.5, 30.));
#11250 = CARTESIAN_POINT ('', (44., -42.5, 8.99999999999998));
#11260 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11240, #11250), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11270 = EDGE_CURVE ('', #11230, #110, #11260, .T.);
#11280 = ORIENTED_EDGE ('', *, *, #11270, .F.);
#11290 = CARTESIAN_POINT ('', (0.300000000000002, -42.5, 30.));
#11300 = VERTEX_POINT ('', #11290);
#11310 = CARTESIAN_POINT ('', (44., -42.5, 30.));
#11320 = CARTESIAN_POINT ('', (0.300000000000004, -42.5, 30.));
#11330 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11310, #11320), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11340 = EDGE_CURVE ('', #11230, #11300, #11330, .T.);
#11350 = ORIENTED_EDGE ('', *, *, #11340, .T.);
#11360 = CARTESIAN_POINT ('', (0.300000000000002, -42.5, -35.));
#11370 = VERTEX_POINT ('', #11360);
#11380 = CARTESIAN_POINT ('', (0.300000000000002, -42.5, -35.));
#11390 = CARTESIAN_POINT ('', (0.300000000000002, -42.5, 30.));
#11400 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11380, #11390), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11410 = EDGE_CURVE ('', #11370, #11300, #11400, .T.);
#11420 = ORIENTED_EDGE ('', *, *, #11410, .F.);
#11430 = CARTESIAN_POINT ('', (44., -42.5, -35.));
#11440 = CARTESIAN_POINT ('', (0.300000000000004, -42.5, -35.));
#11450 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11430, #11440), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11460 = EDGE_CURVE ('', #9360, #11370, #11450, .T.);
#11470 = ORIENTED_EDGE ('', *, *, #11460, .F.);
#11480 = EDGE_LOOP ('', (#10990, #11000, #11010, #11080, #11150, #11200, #11210, #11280, #11350, #11420, #11470));
#11490 = FACE_OUTER_BOUND ('', #11480, .T.);
#11500 = CARTESIAN_POINT ('', (44.001, -42.5, 30.001));
#11510 = CARTESIAN_POINT ('', (44.001, -42.5, -35.001));
#11520 = CARTESIAN_POINT ('', (0.298999999999999, -42.5, 30.001));
#11530 = CARTESIAN_POINT ('', (0.298999999999999, -42.5, -35.001));
#11540 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#11500, #11510), (#11520, #11530)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-43.701, 0.000999999999997669), (-65.001, 0.000999999999997669), .UNSPECIFIED.);
#11550 = ADVANCED_FACE ('', (#11490), #11540, .T.);
#11560 = ORIENTED_EDGE ('', *, *, #9970, .F.);
#11570 = ORIENTED_EDGE ('', *, *, #9620, .T.);
#11580 = ORIENTED_EDGE ('', *, *, #9260, .F.);
#11590 = ORIENTED_EDGE ('', *, *, #810, .T.);
#11600 = CARTESIAN_POINT ('', (0.300000000000002, 42.5, -1.99999999999999));
#11610 = VERTEX_POINT ('', #11600);
#11620 = CARTESIAN_POINT ('', (0.300000000000002, 42.5, -1.99999999999999));
#11630 = CARTESIAN_POINT ('', (0.300000000000002, 42.5, -48.));
#11640 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11620, #11630), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11650 = EDGE_CURVE ('', #11610, #680, #11640, .T.);
#11660 = ORIENTED_EDGE ('', *, *, #11650, .F.);
#11670 = CARTESIAN_POINT ('', (22., 42.5, -1.99999999999999));
#11680 = VERTEX_POINT ('', #11670);
#11690 = CARTESIAN_POINT ('', (22., 42.5, -1.99999999999999));
#11700 = CARTESIAN_POINT ('', (0.300000000000001, 42.5, -1.99999999999999));
#11710 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11690, #11700), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11720 = EDGE_CURVE ('', #11680, #11610, #11710, .T.);
#11730 = ORIENTED_EDGE ('', *, *, #11720, .F.);
#11740 = CARTESIAN_POINT ('', (22., 42.5, -25.3));
#11750 = VERTEX_POINT ('', #11740);
#11760 = CARTESIAN_POINT ('', (22., 42.5, -25.3));
#11770 = CARTESIAN_POINT ('', (22., 42.5, -1.99999999999999));
#11780 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11760, #11770), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11790 = EDGE_CURVE ('', #11750, #11680, #11780, .T.);
#11800 = ORIENTED_EDGE ('', *, *, #11790, .F.);
#11810 = CARTESIAN_POINT ('', (24., 42.5, -25.3));
#11820 = VERTEX_POINT ('', #11810);
#11830 = CARTESIAN_POINT ('', (24., 42.5, -25.3));
#11840 = CARTESIAN_POINT ('', (22., 42.5, -25.3));
#11850 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11830, #11840), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11860 = EDGE_CURVE ('', #11820, #11750, #11850, .T.);
#11870 = ORIENTED_EDGE ('', *, *, #11860, .F.);
#11880 = CARTESIAN_POINT ('', (24., 42.5, -25.));
#11890 = CARTESIAN_POINT ('', (24., 42.5, -25.3));
#11900 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11880, #11890), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11910 = EDGE_CURVE ('', #9930, #11820, #11900, .T.);
#11920 = ORIENTED_EDGE ('', *, *, #11910, .F.);
#11930 = EDGE_LOOP ('', (#11560, #11570, #11580, #11590, #11660, #11730, #11800, #11870, #11920));
#11940 = FACE_OUTER_BOUND ('', #11930, .T.);
#11950 = CARTESIAN_POINT ('', (44.001, 42.5, -1.99899999999999));
#11960 = CARTESIAN_POINT ('', (0.298999999999999, 42.5, -1.99899999999999));
#11970 = CARTESIAN_POINT ('', (44.001, 42.5, -48.001));
#11980 = CARTESIAN_POINT ('', (0.298999999999999, 42.5, -48.001));
#11990 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#11950, #11960), (#11970, #11980)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-46.001, 0.00100000000000011), (-0.000999999999997669, 43.701), .UNSPECIFIED.);
#12000 = ADVANCED_FACE ('', (#11940), #11990, .T.);
#12010 = CARTESIAN_POINT ('', (0.3, 41.4517792139252, -1.99999999999999));
#12020 = CARTESIAN_POINT ('', (0.300000000000002, 42.5, -1.99999999999999));
#12030 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#12010, #12020), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#12040 = EDGE_CURVE ('', #1200, #11610, #12030, .T.);
#12050 = ORIENTED_EDGE ('', *, *, #12040, .F.);
#12060 = ORIENTED_EDGE ('', *, *, #1550, .F.);
#12070 = CARTESIAN_POINT ('', (0., 41.4517792139252, -1.99999999999999));
#12080 = CARTESIAN_POINT ('', (0., 30., -1.99999999999999));
#12090 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#12070, #12080), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#12100 = EDGE_CURVE ('', #1410, #10730, #12090, .T.);
#12110 = ORIENTED_EDGE ('', *, *, #12100, .T.);
#12120 = ORIENTED_EDGE ('', *, *, #10770, .F.);
#12130 = CARTESIAN_POINT ('', (22., 42.5, -1.99999999999999));
#12140 = CARTESIAN_POINT ('', (22., 30., -1.99999999999999));
#12150 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#12130, #12140), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#12160 = EDGE_CURVE ('', #11680, #10660, #12150, .T.);
#12170 = ORIENTED_EDGE ('', *, *, #12160, .F.);
#12180 = ORIENTED_EDGE ('', *, *, #11720, .T.);
#12190 = EDGE_LOOP ('', (#12050, #12060, #12110, #12120, #12170, #12180));
#12200 = FACE_OUTER_BOUND ('', #12190, .T.);
#12210 = CARTESIAN_POINT ('', (22.001, 29.999, -1.99999999999999));
#12220 = CARTESIAN_POINT ('', (-0.000999999999997669, 29.999, -1.99999999999999));
#12230 = CARTESIAN_POINT ('', (22.001, 42.501, -1.99999999999999));
#12240 = CARTESIAN_POINT ('', (-0.000999999999997669, 42.501, -1.99999999999999));
#12250 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#12210, #12220), (#12230, #12240)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-12.501, 0.00100000000000122), (21.999, 44.001), .UNSPECIFIED.);
#12260 = ADVANCED_FACE ('', (#12200), #12250, .T.);
#12270 = CARTESIAN_POINT ('', (0.300000000000002, -33.1698729810778, 32.5));
#12280 = VERTEX_POINT ('', #12270);
#12290 = CARTESIAN_POINT ('', (0.300000000000002, -33.1698729810778, 32.5));
#12300 = CARTESIAN_POINT ('', (0.3, -25.8069758011279, 32.5));
#12310 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#12290, #12300), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#12320 = EDGE_CURVE ('', #12280, #1220, #12310, .T.);
#12330 = ORIENTED_EDGE ('', *, *, #12320, .F.);
#12340 = CARTESIAN_POINT ('', (44., -33.1698729810778, 32.5));
#12350 = VERTEX_POINT ('', #12340);
#12360 = CARTESIAN_POINT ('', (44., -33.1698729810778, 32.5));
#12370 = CARTESIAN_POINT ('', (0.300000000000004, -33.1698729810778, 32.5));
#12380 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#12360, #12370), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#12390 = EDGE_CURVE ('', #12350, #12280, #12380, .T.);
#12400 = ORIENTED_EDGE ('', *, *, #12390, .F.);
#12410 = CARTESIAN_POINT ('', (44., 30., 32.5));
#12420 = CARTESIAN_POINT ('', (44., -33.1698729810778, 32.5));
#12430 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#12410, #12420), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#12440 = EDGE_CURVE ('', #10250, #12350, #12430, .T.);
#12450 = ORIENTED_EDGE ('', *, *, #12440, .F.);
#12460 = ORIENTED_EDGE ('', *, *, #10290, .T.);
#12470 = CARTESIAN_POINT ('', (0.3, 25.8069758011279, 32.5));
#12480 = VERTEX_POINT ('', #12470);
#12490 = CARTESIAN_POINT ('', (0.3, 25.8069758011279, 32.5));
#12500 = CARTESIAN_POINT ('', (0.300000000000002, 30., 32.5));
#12510 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#12490, #12500), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#12520 = EDGE_CURVE ('', #12480, #10160, #12510, .T.);
#12530 = ORIENTED_EDGE ('', *, *, #12520, .F.);
#12540 = CARTESIAN_POINT ('', (0., 25.8069758011279, 32.5));
#12550 = VERTEX_POINT ('', #12540);
#12560 = CARTESIAN_POINT ('', (0., 25.8069758011279, 32.5));
#12570 = CARTESIAN_POINT ('', (0.3, 25.8069758011279, 32.5));
#12580 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#12560, #12570), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#12590 = EDGE_CURVE ('', #12550, #12480, #12580, .T.);
#12600 = ORIENTED_EDGE ('', *, *, #12590, .F.);
#12610 = CARTESIAN_POINT ('', (0., 25.8069758011279, 32.5));
#12620 = CARTESIAN_POINT ('', (0., -25.8069758011279, 32.5));
#12630 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#12610, #12620), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#12640 = EDGE_CURVE ('', #12550, #1340, #12630, .T.);
#12650 = ORIENTED_EDGE ('', *, *, #12640, .T.);
#12660 = ORIENTED_EDGE ('', *, *, #1380, .F.);
#12670 = EDGE_LOOP ('', (#12330, #12400, #12450, #12460, #12530, #12600, #12650, #12660));
#12680 = FACE_OUTER_BOUND ('', #12670, .T.);
#12690 = CARTESIAN_POINT ('', (44.001, -33.1708729810778, 32.5));
#12700 = CARTESIAN_POINT ('', (-0.000999999999997669, -33.1708729810778, 32.5));
#12710 = CARTESIAN_POINT ('', (44.001, 30.001, 32.5));
#12720 = CARTESIAN_POINT ('', (-0.000999999999997669, 30.001, 32.5));
#12730 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#12690, #12700), (#12710, #12720)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-63.1708729810778, 0.000999999999997669), (-0.000999999999997669, 44.001), .UNSPECIFIED.);
#12740 = ADVANCED_FACE ('', (#12680), #12730, .T.);
#12750 = CARTESIAN_POINT ('', (44., -33.1698729810778, 32.5));
#12760 = CARTESIAN_POINT ('', (44., -42.5, 30.));
#12770 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#12750, #12760), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#12780 = EDGE_CURVE ('', #12350, #11230, #12770, .T.);
#12790 = ORIENTED_EDGE ('', *, *, #12780, .F.);
#12800 = ORIENTED_EDGE ('', *, *, #12390, .T.);
#12810 = CARTESIAN_POINT ('', (0.300000000000002, -42.5, 30.));
#12820 = CARTESIAN_POINT ('', (0.300000000000002, -33.1698729810778, 32.5));
#12830 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#12810, #12820), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#12840 = EDGE_CURVE ('', #11300, #12280, #12830, .T.);
#12850 = ORIENTED_EDGE ('', *, *, #12840, .F.);
#12860 = ORIENTED_EDGE ('', *, *, #11340, .F.);
#12870 = EDGE_LOOP ('', (#12790, #12800, #12850, #12860));
#12880 = FACE_OUTER_BOUND ('', #12870, .T.);
#12890 = CARTESIAN_POINT ('', (44.001, -42.5011830127019, 29.9996830127019));
#12900 = CARTESIAN_POINT ('', (0.298999999999999, -42.5011830127019, 29.9996830127019));
#12910 = CARTESIAN_POINT ('', (44.001, -33.1686899683759, 32.5003169872981));
#12920 = CARTESIAN_POINT ('', (0.298999999999999, -33.1686899683759, 32.5003169872981));
#12930 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#12890, #12900), (#12910, #12920)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-9.66048300776208, 0.00122474487138646), (-0.000999999999997669, 43.701), .UNSPECIFIED.);
#12940 = ADVANCED_FACE ('', (#12880), #12930, .T.);
#12950 = CARTESIAN_POINT ('', (0.300000000000002, 6.0166604983953, -48.));
#12960 = CARTESIAN_POINT ('', (0.300000000000002, -42.5, -35.));
#12970 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#12950, #12960), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#12980 = EDGE_CURVE ('', #700, #11370, #12970, .T.);
#12990 = ORIENTED_EDGE ('', *, *, #12980, .F.);
#13000 = ORIENTED_EDGE ('', *, *, #930, .F.);
#13010 = ORIENTED_EDGE ('', *, *, #9450, .F.);
#13020 = ORIENTED_EDGE ('', *, *, #11460, .T.);
#13030 = EDGE_LOOP ('', (#12990, #13000, #13010, #13020));
#13040 = FACE_OUTER_BOUND ('', #13030, .T.);
#13050 = CARTESIAN_POINT ('', (44.001, 6.01784351109719, -48.0003169872981));
#13060 = CARTESIAN_POINT ('', (0.298999999999999, 6.01784351109719, -48.0003169872981));
#13070 = CARTESIAN_POINT ('', (44.001, -42.5011830127019, -34.9996830127019));
#13080 = CARTESIAN_POINT ('', (0.298999999999999, -42.5011830127019, -34.9996830127019));
#13090 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#13050, #13060), (#13070, #13080)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-50.2293677119028, 0.00122474487139357), (-0.000999999999997669, 43.701), .UNSPECIFIED.);
#13100 = ADVANCED_FACE ('', (#13040), #13090, .T.);
#13110 = ORIENTED_EDGE ('', *, *, #12640, .F.);
#13120 = CARTESIAN_POINT ('', (0., 25.8069758011279, 32.5));
#13130 = CARTESIAN_POINT ('', (0., 28.0345770263211, 30.7311492026731));
#13140 = CARTESIAN_POINT ('', (0., 30., 28.6749019178793));
#13150 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#13120, #13130, #13140), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (128.451711490888, 136.293732440208), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.997659270416287, 1.))
   REPRESENTATION_ITEM ('')
);
#13160 = EDGE_CURVE ('', #12550, #10800, #13150, .T.);
#13170 = ORIENTED_EDGE ('', *, *, #13160, .T.);
#13180 = ORIENTED_EDGE ('', *, *, #10840, .F.);
#13190 = ORIENTED_EDGE ('', *, *, #12100, .F.);
#13200 = ORIENTED_EDGE ('', *, *, #1500, .T.);
#13210 = EDGE_LOOP ('', (#13110, #13170, #13180, #13190, #13200));
#13220 = FACE_OUTER_BOUND ('', #13210, .T.);
#13230 = ORIENTED_EDGE ('', *, *, #8540, .T.);
#13240 = ORIENTED_EDGE ('', *, *, #8460, .T.);
#13250 = EDGE_LOOP ('', (#13230, #13240));
#13260 = FACE_BOUND ('', #13250, .T.);
#13270 = CARTESIAN_POINT ('', (0., -51.319634533523, 32.501));
#13280 = CARTESIAN_POINT ('', (0., -51.319634533523, -46.9441931882234));
#13290 = CARTESIAN_POINT ('', (0., 41.4527792139252, 32.501));
#13300 = CARTESIAN_POINT ('', (0., 41.4527792139252, -46.9441931882234));
#13310 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#13270, #13280), (#13290, #13300)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-81.319634533523, 11.4527792139252), (-80.501, -1.05580681177662), .UNSPECIFIED.);
#13320 = ADVANCED_FACE ('', (#13220, #13260), #13310, .T.);
#13330 = CARTESIAN_POINT ('', (36.5, 30., 11.9496110848997));
#13340 = CARTESIAN_POINT ('', (36.5, 21.5186038117718, 24.0623001455081));
#13350 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#13330, #13340), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#13360 = EDGE_CURVE ('', #10460, #1920, #13350, .T.);
#13370 = ORIENTED_EDGE ('', *, *, #13360, .F.);
#13380 = ORIENTED_EDGE ('', *, *, #10500, .T.);
#13390 = CARTESIAN_POINT ('', (36.5, 25.0000741764932, 30.7499999993527));
#13400 = CARTESIAN_POINT ('', (36.5, 30., 30.7499127341847));
#13410 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#13390, #13400), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#13420 = EDGE_CURVE ('', #1990, #10390, #13410, .T.);
#13430 = ORIENTED_EDGE ('', *, *, #13420, .F.);
#13440 = ORIENTED_EDGE ('', *, *, #2060, .F.);
#13450 = EDGE_LOOP ('', (#13370, #13380, #13430, #13440));
#13460 = FACE_OUTER_BOUND ('', #13450, .T.);
#13470 = CARTESIAN_POINT ('', (36.5, 21., 26.5));
#13480 = VERTEX_POINT ('', #13470);
#13490 = CARTESIAN_POINT ('', (36.5, 28.8252190238521, 25.330513181109));
#13500 = VERTEX_POINT ('', #13490);
#13510 = CARTESIAN_POINT ('', (36.5, 21., 26.5));
#13520 = CARTESIAN_POINT ('', (36.5, 21., 30.5));
#13530 = CARTESIAN_POINT ('', (36.5, 25., 30.5));
#13540 = CARTESIAN_POINT ('', (36.5, 29., 30.5));
#13550 = CARTESIAN_POINT ('', (36.5, 29., 26.5));
#13560 = CARTESIAN_POINT ('', (36.5, 29., 25.9021959946035));
#13570 = CARTESIAN_POINT ('', (36.5, 28.8252190238521, 25.330513181109));
#13580 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#13510, #13520, #13530, #13540, #13550, #13560, #13570), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 3), (0., 90., 180., 197.913102932547), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1., 0.941704151368329, 0.906614070227309))
   REPRESENTATION_ITEM ('')
);
#13590 = EDGE_CURVE ('', #13480, #13500, #13580, .T.);
#13600 = ORIENTED_EDGE ('', *, *, #13590, .T.);
#13610 = CARTESIAN_POINT ('', (36.5, 28.8252190238521, 25.330513181109));
#13620 = CARTESIAN_POINT ('', (36.5, 27.9598443001139, 22.5));
#13630 = CARTESIAN_POINT ('', (36.5, 25., 22.5));
#13640 = CARTESIAN_POINT ('', (36.5, 21., 22.5));
#13650 = CARTESIAN_POINT ('', (36.5, 21., 26.5));
#13660 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#13610, #13620, #13630, #13640, #13650), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (197.913102932547, 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.906614070227309, 0.765402629818219, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#13670 = EDGE_CURVE ('', #13500, #13480, #13660, .T.);
#13680 = ORIENTED_EDGE ('', *, *, #13670, .T.);
#13690 = EDGE_LOOP ('', (#13600, #13680));
#13700 = FACE_BOUND ('', #13690, .T.);
#13710 = CARTESIAN_POINT ('', (36.5, 30.001, 30.7510450111966));
#13720 = CARTESIAN_POINT ('', (36.5, 30.001, 11.9486110848997));
#13730 = CARTESIAN_POINT ('', (36.5, 20.0383566742037, 30.7510450111966));
#13740 = CARTESIAN_POINT ('', (36.5, 20.0383566742037, 11.9486110848997));
#13750 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#13710, #13720), (#13730, #13740)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-9.96164332579625, 0.00100000000000122), (-21.7510450111966, -2.9486110848997), .UNSPECIFIED.);
#13760 = ADVANCED_FACE ('', (#13460, #13700), #13750, .T.);
#13770 = ORIENTED_EDGE ('', *, *, #150, .T.);
#13780 = ORIENTED_EDGE ('', *, *, #10620, .T.);
#13790 = CARTESIAN_POINT ('', (44., 30., 11.9496110848997));
#13800 = CARTESIAN_POINT ('', (44., 21.5186038117718, 24.0623001455081));
#13810 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#13790, #13800), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#13820 = EDGE_CURVE ('', #10530, #1800, #13810, .T.);
#13830 = ORIENTED_EDGE ('', *, *, #13820, .T.);
#13840 = ORIENTED_EDGE ('', *, *, #1890, .T.);
#13850 = CARTESIAN_POINT ('', (44., 25.0000741764932, 30.7499999993527));
#13860 = CARTESIAN_POINT ('', (44., 30., 30.7499127341847));
#13870 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#13850, #13860), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#13880 = EDGE_CURVE ('', #1820, #10320, #13870, .T.);
#13890 = ORIENTED_EDGE ('', *, *, #13880, .T.);
#13900 = ORIENTED_EDGE ('', *, *, #10360, .T.);
#13910 = ORIENTED_EDGE ('', *, *, #12440, .T.);
#13920 = ORIENTED_EDGE ('', *, *, #12780, .T.);
#13930 = ORIENTED_EDGE ('', *, *, #11270, .T.);
#13940 = EDGE_LOOP ('', (#13770, #13780, #13830, #13840, #13890, #13900, #13910, #13920, #13930));
#13950 = FACE_OUTER_BOUND ('', #13940, .T.);
#13960 = CARTESIAN_POINT ('', (44., 30.001, 32.501));
#13970 = CARTESIAN_POINT ('', (44., 30.001, 8.99899999999999));
#13980 = CARTESIAN_POINT ('', (44., -42.501, 32.501));
#13990 = CARTESIAN_POINT ('', (44., -42.501, 8.99899999999998));
#14000 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#13960, #13970), (#13980, #13990)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-72.501, 0.00100000000000122), (-80.501, -56.999), .UNSPECIFIED.);
#14010 = ADVANCED_FACE ('', (#13950), #14000, .T.);
#14020 = ORIENTED_EDGE ('', *, *, #5640, .T.);
#14030 = CARTESIAN_POINT ('', (-9.99867965644037, 12., 16.));
#14040 = CARTESIAN_POINT ('', (-9.99867965644037, -12., 16.));
#14050 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#14030, #14040), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#14060 = EDGE_CURVE ('', #5510, #5750, #14050, .T.);
#14070 = ORIENTED_EDGE ('', *, *, #14060, .T.);
#14080 = ORIENTED_EDGE ('', *, *, #5790, .T.);
#14090 = CARTESIAN_POINT ('', (-7., 12., 16.));
#14100 = CARTESIAN_POINT ('', (-7., -12., 16.));
#14110 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#14090, #14100), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#14120 = EDGE_CURVE ('', #5600, #5670, #14110, .T.);
#14130 = ORIENTED_EDGE ('', *, *, #14120, .F.);
#14140 = EDGE_LOOP ('', (#14020, #14070, #14080, #14130));
#14150 = FACE_OUTER_BOUND ('', #14140, .T.);
#14160 = CARTESIAN_POINT ('', (-6.999, -12.001, 16.));
#14170 = CARTESIAN_POINT ('', (-9.99967965644037, -12.001, 16.));
#14180 = CARTESIAN_POINT ('', (-6.999, 12.001, 16.));
#14190 = CARTESIAN_POINT ('', (-9.99967965644037, 12.001, 16.));
#14200 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#14160, #14170), (#14180, #14190)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (27.999, 52.001), (-56.001, -53.0003203435596), .UNSPECIFIED.);
#14210 = ADVANCED_FACE ('', (#14150), #14200, .T.);
#14220 = ORIENTED_EDGE ('', *, *, #6040, .T.);
#14230 = CARTESIAN_POINT ('', (-13.4013203435596, 12., 16.));
#14240 = CARTESIAN_POINT ('', (-13.4013203435596, -12., 16.));
#14250 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#14230, #14240), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#14260 = EDGE_CURVE ('', #5350, #5910, #14250, .T.);
#14270 = ORIENTED_EDGE ('', *, *, #14260, .F.);
#14280 = ORIENTED_EDGE ('', *, *, #5390, .T.);
#14290 = CARTESIAN_POINT ('', (-13.9986796564404, 12., 16.));
#14300 = CARTESIAN_POINT ('', (-13.9986796564404, -12., 16.));
#14310 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#14290, #14300), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#14320 = EDGE_CURVE ('', #5260, #6000, #14310, .T.);
#14330 = ORIENTED_EDGE ('', *, *, #14320, .T.);
#14340 = EDGE_LOOP ('', (#14220, #14270, #14280, #14330));
#14350 = FACE_OUTER_BOUND ('', #14340, .T.);
#14360 = CARTESIAN_POINT ('', (-13.4003203435596, -12.001, 16.));
#14370 = CARTESIAN_POINT ('', (-13.9996796564404, -12.001, 16.));
#14380 = CARTESIAN_POINT ('', (-13.4003203435596, 12.001, 16.));
#14390 = CARTESIAN_POINT ('', (-13.9996796564404, 12.001, 16.));
#14400 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#14360, #14370), (#14380, #14390)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (27.999, 52.001), (-49.5996796564404, -49.0003203435596), .UNSPECIFIED.);
#14410 = ADVANCED_FACE ('', (#14350), #14400, .T.);
#14420 = ORIENTED_EDGE ('', *, *, #6290, .T.);
#14430 = CARTESIAN_POINT ('', (-17.4013203435596, 12., 16.));
#14440 = CARTESIAN_POINT ('', (-17.4013203435596, -12., 16.));
#14450 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#14430, #14440), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#14460 = EDGE_CURVE ('', #5100, #6160, #14450, .T.);
#14470 = ORIENTED_EDGE ('', *, *, #14460, .F.);
#14480 = ORIENTED_EDGE ('', *, *, #5140, .T.);
#14490 = CARTESIAN_POINT ('', (-17.9986796564404, 12., 16.));
#14500 = CARTESIAN_POINT ('', (-17.9986796564404, -12., 16.));
#14510 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#14490, #14500), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#14520 = EDGE_CURVE ('', #5010, #6250, #14510, .T.);
#14530 = ORIENTED_EDGE ('', *, *, #14520, .T.);
#14540 = EDGE_LOOP ('', (#14420, #14470, #14480, #14530));
#14550 = FACE_OUTER_BOUND ('', #14540, .T.);
#14560 = CARTESIAN_POINT ('', (-17.4003203435596, -12.001, 16.));
#14570 = CARTESIAN_POINT ('', (-17.9996796564404, -12.001, 16.));
#14580 = CARTESIAN_POINT ('', (-17.4003203435596, 12.001, 16.));
#14590 = CARTESIAN_POINT ('', (-17.9996796564404, 12.001, 16.));
#14600 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#14560, #14570), (#14580, #14590)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (27.999, 52.001), (-45.5996796564404, -45.0003203435596), .UNSPECIFIED.);
#14610 = ADVANCED_FACE ('', (#14550), #14600, .T.);
#14620 = ORIENTED_EDGE ('', *, *, #6540, .T.);
#14630 = CARTESIAN_POINT ('', (-21.4013203435596, 12., 16.));
#14640 = CARTESIAN_POINT ('', (-21.4013203435596, -12., 16.));
#14650 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#14630, #14640), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#14660 = EDGE_CURVE ('', #4850, #6410, #14650, .T.);
#14670 = ORIENTED_EDGE ('', *, *, #14660, .F.);
#14680 = ORIENTED_EDGE ('', *, *, #4890, .T.);
#14690 = CARTESIAN_POINT ('', (-21.9986796564404, 12., 16.));
#14700 = CARTESIAN_POINT ('', (-21.9986796564404, -12., 16.));
#14710 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#14690, #14700), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#14720 = EDGE_CURVE ('', #4760, #6500, #14710, .T.);
#14730 = ORIENTED_EDGE ('', *, *, #14720, .T.);
#14740 = EDGE_LOOP ('', (#14620, #14670, #14680, #14730));
#14750 = FACE_OUTER_BOUND ('', #14740, .T.);
#14760 = CARTESIAN_POINT ('', (-21.4003203435596, -12.001, 16.));
#14770 = CARTESIAN_POINT ('', (-21.9996796564404, -12.001, 16.));
#14780 = CARTESIAN_POINT ('', (-21.4003203435596, 12.001, 16.));
#14790 = CARTESIAN_POINT ('', (-21.9996796564404, 12.001, 16.));
#14800 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#14760, #14770), (#14780, #14790)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (27.999, 52.001), (-41.5996796564404, -41.0003203435596), .UNSPECIFIED.);
#14810 = ADVANCED_FACE ('', (#14750), #14800, .T.);
#14820 = ORIENTED_EDGE ('', *, *, #3390, .T.);
#14830 = CARTESIAN_POINT ('', (-45.9986796564404, 12., 16.));
#14840 = CARTESIAN_POINT ('', (-45.9986796564404, -12., 16.));
#14850 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#14830, #14840), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#14860 = EDGE_CURVE ('', #3260, #8000, #14850, .T.);
#14870 = ORIENTED_EDGE ('', *, *, #14860, .T.);
#14880 = ORIENTED_EDGE ('', *, *, #8040, .T.);
#14890 = CARTESIAN_POINT ('', (-45.4013203435596, -12., 16.));
#14900 = CARTESIAN_POINT ('', (-45.4013203435596, 12., 16.));
#14910 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#14890, #14900), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#14920 = EDGE_CURVE ('', #7910, #3350, #14910, .T.);
#14930 = ORIENTED_EDGE ('', *, *, #14920, .T.);
#14940 = EDGE_LOOP ('', (#14820, #14870, #14880, #14930));
#14950 = FACE_OUTER_BOUND ('', #14940, .T.);
#14960 = CARTESIAN_POINT ('', (-45.4003203435596, -12.001, 16.));
#14970 = CARTESIAN_POINT ('', (-45.9996796564404, -12.001, 16.));
#14980 = CARTESIAN_POINT ('', (-45.4003203435596, 12.001, 16.));
#14990 = CARTESIAN_POINT ('', (-45.9996796564404, 12.001, 16.));
#15000 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#14960, #14970), (#14980, #14990)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (27.999, 52.001), (-17.5996796564404, -17.0003203435596), .UNSPECIFIED.);
#15010 = ADVANCED_FACE ('', (#14950), #15000, .T.);
#15020 = ORIENTED_EDGE ('', *, *, #3640, .T.);
#15030 = CARTESIAN_POINT ('', (-41.9986796564404, 12., 16.));
#15040 = CARTESIAN_POINT ('', (-41.9986796564404, -12., 16.));
#15050 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#15030, #15040), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#15060 = EDGE_CURVE ('', #3510, #7750, #15050, .T.);
#15070 = ORIENTED_EDGE ('', *, *, #15060, .T.);
#15080 = ORIENTED_EDGE ('', *, *, #7790, .T.);
#15090 = CARTESIAN_POINT ('', (-41.4013203435596, -12., 16.));
#15100 = CARTESIAN_POINT ('', (-41.4013203435596, 12., 16.));
#15110 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#15090, #15100), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#15120 = EDGE_CURVE ('', #7660, #3600, #15110, .T.);
#15130 = ORIENTED_EDGE ('', *, *, #15120, .T.);
#15140 = EDGE_LOOP ('', (#15020, #15070, #15080, #15130));
#15150 = FACE_OUTER_BOUND ('', #15140, .T.);
#15160 = CARTESIAN_POINT ('', (-41.4003203435596, -12.001, 16.));
#15170 = CARTESIAN_POINT ('', (-41.9996796564404, -12.001, 16.));
#15180 = CARTESIAN_POINT ('', (-41.4003203435596, 12.001, 16.));
#15190 = CARTESIAN_POINT ('', (-41.9996796564404, 12.001, 16.));
#15200 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#15160, #15170), (#15180, #15190)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (27.999, 52.001), (-21.5996796564404, -21.0003203435596), .UNSPECIFIED.);
#15210 = ADVANCED_FACE ('', (#15150), #15200, .T.);
#15220 = ORIENTED_EDGE ('', *, *, #3890, .T.);
#15230 = CARTESIAN_POINT ('', (-37.9986796564404, 12., 16.));
#15240 = CARTESIAN_POINT ('', (-37.9986796564404, -12., 16.));
#15250 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#15230, #15240), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#15260 = EDGE_CURVE ('', #3760, #7500, #15250, .T.);
#15270 = ORIENTED_EDGE ('', *, *, #15260, .T.);
#15280 = ORIENTED_EDGE ('', *, *, #7540, .T.);
#15290 = CARTESIAN_POINT ('', (-37.4013203435596, -12., 16.));
#15300 = CARTESIAN_POINT ('', (-37.4013203435596, 12., 16.));
#15310 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#15290, #15300), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#15320 = EDGE_CURVE ('', #7410, #3850, #15310, .T.);
#15330 = ORIENTED_EDGE ('', *, *, #15320, .T.);
#15340 = EDGE_LOOP ('', (#15220, #15270, #15280, #15330));
#15350 = FACE_OUTER_BOUND ('', #15340, .T.);
#15360 = CARTESIAN_POINT ('', (-37.4003203435596, -12.001, 16.));
#15370 = CARTESIAN_POINT ('', (-37.9996796564404, -12.001, 16.));
#15380 = CARTESIAN_POINT ('', (-37.4003203435596, 12.001, 16.));
#15390 = CARTESIAN_POINT ('', (-37.9996796564404, 12.001, 16.));
#15400 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#15360, #15370), (#15380, #15390)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (27.999, 52.001), (-25.5996796564404, -25.0003203435596), .UNSPECIFIED.);
#15410 = ADVANCED_FACE ('', (#15350), #15400, .T.);
#15420 = ORIENTED_EDGE ('', *, *, #4140, .T.);
#15430 = CARTESIAN_POINT ('', (-33.9986796564404, 12., 16.));
#15440 = CARTESIAN_POINT ('', (-33.9986796564404, -12., 16.));
#15450 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#15430, #15440), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#15460 = EDGE_CURVE ('', #4010, #7250, #15450, .T.);
#15470 = ORIENTED_EDGE ('', *, *, #15460, .T.);
#15480 = ORIENTED_EDGE ('', *, *, #7290, .T.);
#15490 = CARTESIAN_POINT ('', (-33.4013203435596, -12., 16.));
#15500 = CARTESIAN_POINT ('', (-33.4013203435596, 12., 16.));
#15510 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#15490, #15500), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#15520 = EDGE_CURVE ('', #7160, #4100, #15510, .T.);
#15530 = ORIENTED_EDGE ('', *, *, #15520, .T.);
#15540 = EDGE_LOOP ('', (#15420, #15470, #15480, #15530));
#15550 = FACE_OUTER_BOUND ('', #15540, .T.);
#15560 = CARTESIAN_POINT ('', (-33.4003203435596, -12.001, 16.));
#15570 = CARTESIAN_POINT ('', (-33.9996796564404, -12.001, 16.));
#15580 = CARTESIAN_POINT ('', (-33.4003203435596, 12.001, 16.));
#15590 = CARTESIAN_POINT ('', (-33.9996796564404, 12.001, 16.));
#15600 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#15560, #15570), (#15580, #15590)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (27.999, 52.001), (-29.5996796564404, -29.0003203435596), .UNSPECIFIED.);
#15610 = ADVANCED_FACE ('', (#15550), #15600, .T.);
#15620 = ORIENTED_EDGE ('', *, *, #4390, .T.);
#15630 = CARTESIAN_POINT ('', (-29.9986796564404, 12., 16.));
#15640 = CARTESIAN_POINT ('', (-29.9986796564404, -12., 16.));
#15650 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#15630, #15640), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#15660 = EDGE_CURVE ('', #4260, #7000, #15650, .T.);
#15670 = ORIENTED_EDGE ('', *, *, #15660, .T.);
#15680 = ORIENTED_EDGE ('', *, *, #7040, .T.);
#15690 = CARTESIAN_POINT ('', (-29.4013203435596, -12., 16.));
#15700 = CARTESIAN_POINT ('', (-29.4013203435596, 12., 16.));
#15710 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#15690, #15700), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#15720 = EDGE_CURVE ('', #6910, #4350, #15710, .T.);
#15730 = ORIENTED_EDGE ('', *, *, #15720, .T.);
#15740 = EDGE_LOOP ('', (#15620, #15670, #15680, #15730));
#15750 = FACE_OUTER_BOUND ('', #15740, .T.);
#15760 = CARTESIAN_POINT ('', (-29.4003203435596, -12.001, 16.));
#15770 = CARTESIAN_POINT ('', (-29.9996796564404, -12.001, 16.));
#15780 = CARTESIAN_POINT ('', (-29.4003203435596, 12.001, 16.));
#15790 = CARTESIAN_POINT ('', (-29.9996796564404, 12.001, 16.));
#15800 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#15760, #15770), (#15780, #15790)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (27.999, 52.001), (-33.5996796564404, -33.0003203435596), .UNSPECIFIED.);
#15810 = ADVANCED_FACE ('', (#15750), #15800, .T.);
#15820 = ORIENTED_EDGE ('', *, *, #6790, .T.);
#15830 = CARTESIAN_POINT ('', (-25.4013203435596, 12., 16.));
#15840 = CARTESIAN_POINT ('', (-25.4013203435596, -12., 16.));
#15850 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#15830, #15840), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#15860 = EDGE_CURVE ('', #4600, #6660, #15850, .T.);
#15870 = ORIENTED_EDGE ('', *, *, #15860, .F.);
#15880 = ORIENTED_EDGE ('', *, *, #4640, .T.);
#15890 = CARTESIAN_POINT ('', (-25.9986796564404, 12., 16.));
#15900 = CARTESIAN_POINT ('', (-25.9986796564404, -12., 16.));
#15910 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#15890, #15900), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#15920 = EDGE_CURVE ('', #4510, #6750, #15910, .T.);
#15930 = ORIENTED_EDGE ('', *, *, #15920, .T.);
#15940 = EDGE_LOOP ('', (#15820, #15870, #15880, #15930));
#15950 = FACE_OUTER_BOUND ('', #15940, .T.);
#15960 = CARTESIAN_POINT ('', (-25.4003203435596, -12.001, 16.));
#15970 = CARTESIAN_POINT ('', (-25.9996796564404, -12.001, 16.));
#15980 = CARTESIAN_POINT ('', (-25.4003203435596, 12.001, 16.));
#15990 = CARTESIAN_POINT ('', (-25.9996796564404, 12.001, 16.));
#16000 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#15960, #15970), (#15980, #15990)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (27.999, 52.001), (-37.5996796564404, -37.0003203435596), .UNSPECIFIED.);
#16010 = ADVANCED_FACE ('', (#15950), #16000, .T.);
#16020 = CARTESIAN_POINT ('', (-63., -10.3617868290777, 16.));
#16030 = VERTEX_POINT ('', #16020);
#16040 = CARTESIAN_POINT ('', (-63., -10.3617868290777, 16.));
#16050 = CARTESIAN_POINT ('', (-63., 10.3617868290777, 16.));
#16060 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#16040, #16050), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#16070 = EDGE_CURVE ('', #16030, #2450, #16060, .T.);
#16080 = ORIENTED_EDGE ('', *, *, #16070, .T.);
#16090 = ORIENTED_EDGE ('', *, *, #2560, .T.);
#16100 = CARTESIAN_POINT ('', (-63., -19.0621779, -2.43687976764454E-14));
#16110 = CARTESIAN_POINT ('', (-63., -19.0621779, 10.3655251495933));
#16120 = CARTESIAN_POINT ('', (-63., -10.3617868290777, 16.));
#16130 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#16100, #16110, #16120), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (540.49386709157, 597.07243487688), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.929407761641234, 0.846939691065666, 1.))
   REPRESENTATION_ITEM ('')
);
#16140 = EDGE_CURVE ('', #2380, #16030, #16130, .T.);
#16150 = ORIENTED_EDGE ('', *, *, #16140, .T.);
#16160 = EDGE_LOOP ('', (#16080, #16090, #16150));
#16170 = FACE_OUTER_BOUND ('', #16160, .T.);
#16180 = CARTESIAN_POINT ('', (-63., -22.3184320835041, 16.001));
#16190 = CARTESIAN_POINT ('', (-63., -22.3184320835041, -19.0631779));
#16200 = CARTESIAN_POINT ('', (-63., 22.3184320835041, 16.001));
#16210 = CARTESIAN_POINT ('', (-63., 22.3184320835041, -19.0631779));
#16220 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#16180, #16190), (#16200, #16210)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-22.3184320835041, 22.3184320835041), (-16.001, 19.0631779), .UNSPECIFIED.);
#16230 = ADVANCED_FACE ('', (#16170), #16220, .T.);
#16240 = ORIENTED_EDGE ('', *, *, #5720, .T.);
#16250 = ORIENTED_EDGE ('', *, *, #14120, .T.);
#16260 = EDGE_LOOP ('', (#16240, #16250));
#16270 = FACE_OUTER_BOUND ('', #16260, .T.);
#16280 = CARTESIAN_POINT ('', (-7., -12.001, 25.001));
#16290 = CARTESIAN_POINT ('', (-7., -12.001, 15.999));
#16300 = CARTESIAN_POINT ('', (-7., 12.001, 25.001));
#16310 = CARTESIAN_POINT ('', (-7., 12.001, 15.999));
#16320 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#16280, #16290), (#16300, #16310)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (27.999, 52.001), (-5.001, 4.001), .UNSPECIFIED.);
#16330 = ADVANCED_FACE ('', (#16270), #16320, .T.);
#16340 = ORIENTED_EDGE ('', *, *, #3140, .T.);
#16350 = ORIENTED_EDGE ('', *, *, #2650, .T.);
#16360 = ORIENTED_EDGE ('', *, *, #16070, .F.);
#16370 = CARTESIAN_POINT ('', (-63., -10.3617868290777, 16.));
#16380 = CARTESIAN_POINT ('', (-61.8446063220679, -10.9313216796317, 16.));
#16390 = CARTESIAN_POINT ('', (-60.6761824698201, -11.474738217615, 16.));
#16400 = CARTESIAN_POINT ('', (-59.500000274339, -12., 16.));
#16410 = B_SPLINE_CURVE_WITH_KNOTS ('', 3, (#16370, #16380, #16390, #16400), .UNSPECIFIED., .F., .U., (4, 4), (0., 1.), .UNSPECIFIED.);
#16420 = EDGE_CURVE ('', #16030, #8250, #16410, .T.);
#16430 = ORIENTED_EDGE ('', *, *, #16420, .T.);
#16440 = ORIENTED_EDGE ('', *, *, #8290, .T.);
#16450 = CARTESIAN_POINT ('', (-49.4013203435596, -12., 16.));
#16460 = CARTESIAN_POINT ('', (-49.4013203435596, 12., 16.));
#16470 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#16450, #16460), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#16480 = EDGE_CURVE ('', #8160, #3100, #16470, .T.);
#16490 = ORIENTED_EDGE ('', *, *, #16480, .T.);
#16500 = EDGE_LOOP ('', (#16340, #16350, #16360, #16430, #16440, #16490));
#16510 = FACE_OUTER_BOUND ('', #16500, .T.);
#16520 = CARTESIAN_POINT ('', (-49.4003203435596, -12.001, 16.));
#16530 = CARTESIAN_POINT ('', (-63.001, -12.001, 16.));
#16540 = CARTESIAN_POINT ('', (-49.4003203435596, 12.001, 16.));
#16550 = CARTESIAN_POINT ('', (-63.001, 12.001, 16.));
#16560 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#16520, #16530), (#16540, #16550)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (27.999, 52.001), (-13.5996796564404, 0.000999999999997669), .UNSPECIFIED.);
#16570 = ADVANCED_FACE ('', (#16510), #16560, .T.);
#16580 = ORIENTED_EDGE ('', *, *, #4570, .T.);
#16590 = CARTESIAN_POINT ('', (-27.7, 13.983839246877, 14.2986796564404));
#16600 = CARTESIAN_POINT ('', (-27.7, -13.983839246877, 14.2986796564404));
#16610 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#16590, #16600), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#16620 = EDGE_CURVE ('', #4420, #6820, #16610, .T.);
#16630 = ORIENTED_EDGE ('', *, *, #16620, .T.);
#16640 = ORIENTED_EDGE ('', *, *, #6880, .T.);
#16650 = ORIENTED_EDGE ('', *, *, #15920, .F.);
#16660 = EDGE_LOOP ('', (#16580, #16630, #16640, #16650));
#16670 = FACE_OUTER_BOUND ('', #16660, .T.);
#16680 = CARTESIAN_POINT ('', (-27.701, -13.984839246877, 14.2976796564404));
#16690 = CARTESIAN_POINT ('', (-27.701, 13.984839246877, 14.2976796564404));
#16700 = CARTESIAN_POINT ('', (-25.9976796564404, -13.984839246877, 16.001));
#16710 = CARTESIAN_POINT ('', (-25.9976796564404, 13.984839246877, 16.001));
#16720 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#16680, #16690), (#16700, #16710)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.40744451736561, 0.00141421356237359), (-53.984839246877, -26.015160753123), .UNSPECIFIED.);
#16730 = ADVANCED_FACE ('', (#16670), #16720, .T.);
#16740 = ORIENTED_EDGE ('', *, *, #4480, .T.);
#16750 = ORIENTED_EDGE ('', *, *, #15720, .F.);
#16760 = ORIENTED_EDGE ('', *, *, #6970, .T.);
#16770 = ORIENTED_EDGE ('', *, *, #16620, .F.);
#16780 = EDGE_LOOP ('', (#16740, #16750, #16760, #16770));
#16790 = FACE_OUTER_BOUND ('', #16780, .T.);
#16800 = CARTESIAN_POINT ('', (-29.4023203435596, -13.984839246877, 16.001));
#16810 = CARTESIAN_POINT ('', (-29.4023203435596, 13.984839246877, 16.001));
#16820 = CARTESIAN_POINT ('', (-27.699, -13.984839246877, 14.2976796564404));
#16830 = CARTESIAN_POINT ('', (-27.699, 13.984839246877, 14.2976796564404));
#16840 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#16800, #16810), (#16820, #16830)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.40744451736562, 0.00141421356237004), (-53.984839246877, -26.015160753123), .UNSPECIFIED.);
#16850 = ADVANCED_FACE ('', (#16790), #16840, .T.);
#16860 = ORIENTED_EDGE ('', *, *, #4320, .T.);
#16870 = CARTESIAN_POINT ('', (-31.7, 13.9838392468771, 14.2986796564404));
#16880 = CARTESIAN_POINT ('', (-31.7, -13.983839246877, 14.2986796564404));
#16890 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#16870, #16880), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#16900 = EDGE_CURVE ('', #4170, #7070, #16890, .T.);
#16910 = ORIENTED_EDGE ('', *, *, #16900, .T.);
#16920 = ORIENTED_EDGE ('', *, *, #7130, .T.);
#16930 = ORIENTED_EDGE ('', *, *, #15660, .F.);
#16940 = EDGE_LOOP ('', (#16860, #16910, #16920, #16930));
#16950 = FACE_OUTER_BOUND ('', #16940, .T.);
#16960 = CARTESIAN_POINT ('', (-31.701, -13.984839246877, 14.2976796564404));
#16970 = CARTESIAN_POINT ('', (-31.701, 13.9848392468771, 14.2976796564404));
#16980 = CARTESIAN_POINT ('', (-29.9976796564404, -13.984839246877, 16.001));
#16990 = CARTESIAN_POINT ('', (-29.9976796564404, 13.9848392468771, 16.001));
#17000 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#16960, #16970), (#16980, #16990)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.40744451736561, 0.00141421356237359), (-53.984839246877, -26.0151607531229), .UNSPECIFIED.);
#17010 = ADVANCED_FACE ('', (#16950), #17000, .T.);
#17020 = ORIENTED_EDGE ('', *, *, #4230, .T.);
#17030 = ORIENTED_EDGE ('', *, *, #15520, .F.);
#17040 = ORIENTED_EDGE ('', *, *, #7220, .T.);
#17050 = ORIENTED_EDGE ('', *, *, #16900, .F.);
#17060 = EDGE_LOOP ('', (#17020, #17030, #17040, #17050));
#17070 = FACE_OUTER_BOUND ('', #17060, .T.);
#17080 = CARTESIAN_POINT ('', (-33.4023203435596, -13.984839246877, 16.001));
#17090 = CARTESIAN_POINT ('', (-33.4023203435596, 13.9848392468771, 16.001));
#17100 = CARTESIAN_POINT ('', (-31.699, -13.984839246877, 14.2976796564404));
#17110 = CARTESIAN_POINT ('', (-31.699, 13.9848392468771, 14.2976796564404));
#17120 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#17080, #17090), (#17100, #17110)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.40744451736561, 0.00141421356237004), (-53.984839246877, -26.0151607531229), .UNSPECIFIED.);
#17130 = ADVANCED_FACE ('', (#17070), #17120, .T.);
#17140 = ORIENTED_EDGE ('', *, *, #4070, .T.);
#17150 = CARTESIAN_POINT ('', (-35.7, 13.9838392468771, 14.2986796564404));
#17160 = CARTESIAN_POINT ('', (-35.7, -13.983839246877, 14.2986796564404));
#17170 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#17150, #17160), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#17180 = EDGE_CURVE ('', #3920, #7320, #17170, .T.);
#17190 = ORIENTED_EDGE ('', *, *, #17180, .T.);
#17200 = ORIENTED_EDGE ('', *, *, #7380, .T.);
#17210 = ORIENTED_EDGE ('', *, *, #15460, .F.);
#17220 = EDGE_LOOP ('', (#17140, #17190, #17200, #17210));
#17230 = FACE_OUTER_BOUND ('', #17220, .T.);
#17240 = CARTESIAN_POINT ('', (-35.701, -13.984839246877, 14.2976796564404));
#17250 = CARTESIAN_POINT ('', (-35.701, 13.9848392468771, 14.2976796564404));
#17260 = CARTESIAN_POINT ('', (-33.9976796564404, -13.984839246877, 16.001));
#17270 = CARTESIAN_POINT ('', (-33.9976796564404, 13.9848392468771, 16.001));
#17280 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#17240, #17250), (#17260, #17270)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.40744451736561, 0.00141421356237004), (-53.984839246877, -26.0151607531229), .UNSPECIFIED.);
#17290 = ADVANCED_FACE ('', (#17230), #17280, .T.);
#17300 = ORIENTED_EDGE ('', *, *, #3980, .T.);
#17310 = ORIENTED_EDGE ('', *, *, #15320, .F.);
#17320 = ORIENTED_EDGE ('', *, *, #7470, .T.);
#17330 = ORIENTED_EDGE ('', *, *, #17180, .F.);
#17340 = EDGE_LOOP ('', (#17300, #17310, #17320, #17330));
#17350 = FACE_OUTER_BOUND ('', #17340, .T.);
#17360 = CARTESIAN_POINT ('', (-37.4023203435596, -13.984839246877, 16.001));
#17370 = CARTESIAN_POINT ('', (-37.4023203435596, 13.9848392468771, 16.001));
#17380 = CARTESIAN_POINT ('', (-35.699, -13.984839246877, 14.2976796564404));
#17390 = CARTESIAN_POINT ('', (-35.699, 13.9848392468771, 14.2976796564404));
#17400 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#17360, #17370), (#17380, #17390)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.4074445173656, 0.00141421356237714), (-53.984839246877, -26.0151607531229), .UNSPECIFIED.);
#17410 = ADVANCED_FACE ('', (#17350), #17400, .T.);
#17420 = ORIENTED_EDGE ('', *, *, #3820, .T.);
#17430 = CARTESIAN_POINT ('', (-39.7, 13.9838392468771, 14.2986796564404));
#17440 = CARTESIAN_POINT ('', (-39.7, -13.983839246877, 14.2986796564404));
#17450 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#17430, #17440), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#17460 = EDGE_CURVE ('', #3670, #7570, #17450, .T.);
#17470 = ORIENTED_EDGE ('', *, *, #17460, .T.);
#17480 = ORIENTED_EDGE ('', *, *, #7630, .T.);
#17490 = ORIENTED_EDGE ('', *, *, #15260, .F.);
#17500 = EDGE_LOOP ('', (#17420, #17470, #17480, #17490));
#17510 = FACE_OUTER_BOUND ('', #17500, .T.);
#17520 = CARTESIAN_POINT ('', (-39.701, -13.984839246877, 14.2976796564404));
#17530 = CARTESIAN_POINT ('', (-39.701, 13.9848392468771, 14.2976796564404));
#17540 = CARTESIAN_POINT ('', (-37.9976796564404, -13.984839246877, 16.001));
#17550 = CARTESIAN_POINT ('', (-37.9976796564404, 13.9848392468771, 16.001));
#17560 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#17520, #17530), (#17540, #17550)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.40744451736561, 0.00141421356237004), (-53.984839246877, -26.0151607531229), .UNSPECIFIED.);
#17570 = ADVANCED_FACE ('', (#17510), #17560, .T.);
#17580 = ORIENTED_EDGE ('', *, *, #3730, .T.);
#17590 = ORIENTED_EDGE ('', *, *, #15120, .F.);
#17600 = ORIENTED_EDGE ('', *, *, #7720, .T.);
#17610 = ORIENTED_EDGE ('', *, *, #17460, .F.);
#17620 = EDGE_LOOP ('', (#17580, #17590, #17600, #17610));
#17630 = FACE_OUTER_BOUND ('', #17620, .T.);
#17640 = CARTESIAN_POINT ('', (-41.4023203435596, -13.984839246877, 16.001));
#17650 = CARTESIAN_POINT ('', (-41.4023203435596, 13.9848392468771, 16.001));
#17660 = CARTESIAN_POINT ('', (-39.699, -13.984839246877, 14.2976796564404));
#17670 = CARTESIAN_POINT ('', (-39.699, 13.9848392468771, 14.2976796564404));
#17680 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#17640, #17650), (#17660, #17670)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.4074445173656, 0.00141421356237004), (-53.984839246877, -26.0151607531229), .UNSPECIFIED.);
#17690 = ADVANCED_FACE ('', (#17630), #17680, .T.);
#17700 = ORIENTED_EDGE ('', *, *, #3570, .T.);
#17710 = CARTESIAN_POINT ('', (-43.7, 13.9838392468771, 14.2986796564404));
#17720 = CARTESIAN_POINT ('', (-43.7, -13.983839246877, 14.2986796564404));
#17730 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#17710, #17720), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#17740 = EDGE_CURVE ('', #3420, #7820, #17730, .T.);
#17750 = ORIENTED_EDGE ('', *, *, #17740, .T.);
#17760 = ORIENTED_EDGE ('', *, *, #7880, .T.);
#17770 = ORIENTED_EDGE ('', *, *, #15060, .F.);
#17780 = EDGE_LOOP ('', (#17700, #17750, #17760, #17770));
#17790 = FACE_OUTER_BOUND ('', #17780, .T.);
#17800 = CARTESIAN_POINT ('', (-43.701, -13.984839246877, 14.2976796564404));
#17810 = CARTESIAN_POINT ('', (-43.701, 13.9848392468771, 14.2976796564404));
#17820 = CARTESIAN_POINT ('', (-41.9976796564404, -13.984839246877, 16.001));
#17830 = CARTESIAN_POINT ('', (-41.9976796564404, 13.9848392468771, 16.001));
#17840 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#17800, #17810), (#17820, #17830)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.40744451736561, 0.00141421356237004), (-53.984839246877, -26.0151607531229), .UNSPECIFIED.);
#17850 = ADVANCED_FACE ('', (#17790), #17840, .T.);
#17860 = ORIENTED_EDGE ('', *, *, #3480, .T.);
#17870 = ORIENTED_EDGE ('', *, *, #14920, .F.);
#17880 = ORIENTED_EDGE ('', *, *, #7970, .T.);
#17890 = ORIENTED_EDGE ('', *, *, #17740, .F.);
#17900 = EDGE_LOOP ('', (#17860, #17870, #17880, #17890));
#17910 = FACE_OUTER_BOUND ('', #17900, .T.);
#17920 = CARTESIAN_POINT ('', (-45.4023203435596, -13.984839246877, 16.001));
#17930 = CARTESIAN_POINT ('', (-45.4023203435596, 13.9848392468771, 16.001));
#17940 = CARTESIAN_POINT ('', (-43.699, -13.984839246877, 14.2976796564404));
#17950 = CARTESIAN_POINT ('', (-43.699, 13.9848392468771, 14.2976796564404));
#17960 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#17920, #17930), (#17940, #17950)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.4074445173656, 0.00141421356237004), (-53.984839246877, -26.0151607531229), .UNSPECIFIED.);
#17970 = ADVANCED_FACE ('', (#17910), #17960, .T.);
#17980 = ORIENTED_EDGE ('', *, *, #3320, .T.);
#17990 = CARTESIAN_POINT ('', (-47.7, 13.9838392468771, 14.2986796564404));
#18000 = CARTESIAN_POINT ('', (-47.7, -13.983839246877, 14.2986796564404));
#18010 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#17990, #18000), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#18020 = EDGE_CURVE ('', #3170, #8070, #18010, .T.);
#18030 = ORIENTED_EDGE ('', *, *, #18020, .T.);
#18040 = ORIENTED_EDGE ('', *, *, #8130, .T.);
#18050 = ORIENTED_EDGE ('', *, *, #14860, .F.);
#18060 = EDGE_LOOP ('', (#17980, #18030, #18040, #18050));
#18070 = FACE_OUTER_BOUND ('', #18060, .T.);
#18080 = CARTESIAN_POINT ('', (-47.701, -13.984839246877, 14.2976796564404));
#18090 = CARTESIAN_POINT ('', (-47.701, 13.9848392468771, 14.2976796564404));
#18100 = CARTESIAN_POINT ('', (-45.9976796564404, -13.984839246877, 16.001));
#18110 = CARTESIAN_POINT ('', (-45.9976796564404, 13.9848392468771, 16.001));
#18120 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#18080, #18090), (#18100, #18110)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.40744451736561, 0.00141421356237004), (-53.984839246877, -26.0151607531229), .UNSPECIFIED.);
#18130 = ADVANCED_FACE ('', (#18070), #18120, .T.);
#18140 = ORIENTED_EDGE ('', *, *, #3230, .T.);
#18150 = ORIENTED_EDGE ('', *, *, #16480, .F.);
#18160 = ORIENTED_EDGE ('', *, *, #8220, .T.);
#18170 = ORIENTED_EDGE ('', *, *, #18020, .F.);
#18180 = EDGE_LOOP ('', (#18140, #18150, #18160, #18170));
#18190 = FACE_OUTER_BOUND ('', #18180, .T.);
#18200 = CARTESIAN_POINT ('', (-49.4023203435596, -13.984839246877, 16.001));
#18210 = CARTESIAN_POINT ('', (-49.4023203435596, 13.9848392468771, 16.001));
#18220 = CARTESIAN_POINT ('', (-47.699, -13.984839246877, 14.2976796564404));
#18230 = CARTESIAN_POINT ('', (-47.699, 13.9848392468771, 14.2976796564404));
#18240 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#18200, #18210), (#18220, #18230)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.4074445173656, 0.00141421356237004), (-53.984839246877, -26.0151607531229), .UNSPECIFIED.);
#18250 = ADVANCED_FACE ('', (#18190), #18240, .T.);
#18260 = ORIENTED_EDGE ('', *, *, #4820, .T.);
#18270 = CARTESIAN_POINT ('', (-23.7, 13.9838392468771, 14.2986796564404));
#18280 = CARTESIAN_POINT ('', (-23.7, -13.983839246877, 14.2986796564404));
#18290 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#18270, #18280), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#18300 = EDGE_CURVE ('', #4670, #6570, #18290, .T.);
#18310 = ORIENTED_EDGE ('', *, *, #18300, .T.);
#18320 = ORIENTED_EDGE ('', *, *, #6630, .T.);
#18330 = ORIENTED_EDGE ('', *, *, #14720, .F.);
#18340 = EDGE_LOOP ('', (#18260, #18310, #18320, #18330));
#18350 = FACE_OUTER_BOUND ('', #18340, .T.);
#18360 = CARTESIAN_POINT ('', (-23.701, -13.984839246877, 14.2976796564404));
#18370 = CARTESIAN_POINT ('', (-23.701, 13.9848392468771, 14.2976796564404));
#18380 = CARTESIAN_POINT ('', (-21.9976796564404, -13.984839246877, 16.001));
#18390 = CARTESIAN_POINT ('', (-21.9976796564404, 13.9848392468771, 16.001));
#18400 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#18360, #18370), (#18380, #18390)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.40744451736561, 0.00141421356237004), (-53.984839246877, -26.0151607531229), .UNSPECIFIED.);
#18410 = ADVANCED_FACE ('', (#18350), #18400, .T.);
#18420 = ORIENTED_EDGE ('', *, *, #4730, .T.);
#18430 = ORIENTED_EDGE ('', *, *, #15860, .T.);
#18440 = ORIENTED_EDGE ('', *, *, #6720, .T.);
#18450 = ORIENTED_EDGE ('', *, *, #18300, .F.);
#18460 = EDGE_LOOP ('', (#18420, #18430, #18440, #18450));
#18470 = FACE_OUTER_BOUND ('', #18460, .T.);
#18480 = CARTESIAN_POINT ('', (-25.4023203435596, -13.984839246877, 16.001));
#18490 = CARTESIAN_POINT ('', (-25.4023203435596, 13.9848392468771, 16.001));
#18500 = CARTESIAN_POINT ('', (-23.699, -13.984839246877, 14.2976796564404));
#18510 = CARTESIAN_POINT ('', (-23.699, 13.9848392468771, 14.2976796564404));
#18520 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#18480, #18490), (#18500, #18510)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.40744451736561, 0.00141421356237359), (-53.984839246877, -26.0151607531229), .UNSPECIFIED.);
#18530 = ADVANCED_FACE ('', (#18470), #18520, .T.);
#18540 = ORIENTED_EDGE ('', *, *, #5070, .T.);
#18550 = CARTESIAN_POINT ('', (-19.7, 13.9838392468771, 14.2986796564404));
#18560 = CARTESIAN_POINT ('', (-19.7, -13.983839246877, 14.2986796564404));
#18570 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#18550, #18560), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#18580 = EDGE_CURVE ('', #4920, #6320, #18570, .T.);
#18590 = ORIENTED_EDGE ('', *, *, #18580, .T.);
#18600 = ORIENTED_EDGE ('', *, *, #6380, .T.);
#18610 = ORIENTED_EDGE ('', *, *, #14520, .F.);
#18620 = EDGE_LOOP ('', (#18540, #18590, #18600, #18610));
#18630 = FACE_OUTER_BOUND ('', #18620, .T.);
#18640 = CARTESIAN_POINT ('', (-19.701, -13.984839246877, 14.2976796564404));
#18650 = CARTESIAN_POINT ('', (-19.701, 13.9848392468771, 14.2976796564404));
#18660 = CARTESIAN_POINT ('', (-17.9976796564404, -13.984839246877, 16.001));
#18670 = CARTESIAN_POINT ('', (-17.9976796564404, 13.9848392468771, 16.001));
#18680 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#18640, #18650), (#18660, #18670)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.40744451736561, 0.00141421356237359), (-53.984839246877, -26.0151607531229), .UNSPECIFIED.);
#18690 = ADVANCED_FACE ('', (#18630), #18680, .T.);
#18700 = ORIENTED_EDGE ('', *, *, #4980, .T.);
#18710 = ORIENTED_EDGE ('', *, *, #14660, .T.);
#18720 = ORIENTED_EDGE ('', *, *, #6470, .T.);
#18730 = ORIENTED_EDGE ('', *, *, #18580, .F.);
#18740 = EDGE_LOOP ('', (#18700, #18710, #18720, #18730));
#18750 = FACE_OUTER_BOUND ('', #18740, .T.);
#18760 = CARTESIAN_POINT ('', (-21.4023203435596, -13.984839246877, 16.001));
#18770 = CARTESIAN_POINT ('', (-21.4023203435596, 13.9848392468771, 16.001));
#18780 = CARTESIAN_POINT ('', (-19.699, -13.984839246877, 14.2976796564404));
#18790 = CARTESIAN_POINT ('', (-19.699, 13.9848392468771, 14.2976796564404));
#18800 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#18760, #18770), (#18780, #18790)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.40744451736562, 0.00141421356237359), (-53.984839246877, -26.0151607531229), .UNSPECIFIED.);
#18810 = ADVANCED_FACE ('', (#18750), #18800, .T.);
#18820 = ORIENTED_EDGE ('', *, *, #5320, .T.);
#18830 = CARTESIAN_POINT ('', (-15.7, 13.9838392468771, 14.2986796564404));
#18840 = CARTESIAN_POINT ('', (-15.7, -13.983839246877, 14.2986796564404));
#18850 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#18830, #18840), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#18860 = EDGE_CURVE ('', #5170, #6070, #18850, .T.);
#18870 = ORIENTED_EDGE ('', *, *, #18860, .T.);
#18880 = ORIENTED_EDGE ('', *, *, #6130, .T.);
#18890 = ORIENTED_EDGE ('', *, *, #14320, .F.);
#18900 = EDGE_LOOP ('', (#18820, #18870, #18880, #18890));
#18910 = FACE_OUTER_BOUND ('', #18900, .T.);
#18920 = CARTESIAN_POINT ('', (-15.701, -13.984839246877, 14.2976796564404));
#18930 = CARTESIAN_POINT ('', (-15.701, 13.9848392468771, 14.2976796564404));
#18940 = CARTESIAN_POINT ('', (-13.9976796564404, -13.984839246877, 16.001));
#18950 = CARTESIAN_POINT ('', (-13.9976796564404, 13.9848392468771, 16.001));
#18960 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#18920, #18930), (#18940, #18950)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.40744451736561, 0.00141421356237181), (-53.984839246877, -26.0151607531229), .UNSPECIFIED.);
#18970 = ADVANCED_FACE ('', (#18910), #18960, .T.);
#18980 = ORIENTED_EDGE ('', *, *, #5230, .T.);
#18990 = ORIENTED_EDGE ('', *, *, #14460, .T.);
#19000 = ORIENTED_EDGE ('', *, *, #6220, .T.);
#19010 = ORIENTED_EDGE ('', *, *, #18860, .F.);
#19020 = EDGE_LOOP ('', (#18980, #18990, #19000, #19010));
#19030 = FACE_OUTER_BOUND ('', #19020, .T.);
#19040 = CARTESIAN_POINT ('', (-17.4023203435596, -13.984839246877, 16.001));
#19050 = CARTESIAN_POINT ('', (-17.4023203435596, 13.9848392468771, 16.001));
#19060 = CARTESIAN_POINT ('', (-15.699, -13.984839246877, 14.2976796564404));
#19070 = CARTESIAN_POINT ('', (-15.699, 13.9848392468771, 14.2976796564404));
#19080 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#19040, #19050), (#19060, #19070)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.40744451736561, 0.00141421356237359), (-53.984839246877, -26.0151607531229), .UNSPECIFIED.);
#19090 = ADVANCED_FACE ('', (#19030), #19080, .T.);
#19100 = ORIENTED_EDGE ('', *, *, #5570, .T.);
#19110 = CARTESIAN_POINT ('', (-11.7, 13.983839246877, 14.2986796564404));
#19120 = CARTESIAN_POINT ('', (-11.7, -13.983839246877, 14.2986796564404));
#19130 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#19110, #19120), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#19140 = EDGE_CURVE ('', #5420, #5820, #19130, .T.);
#19150 = ORIENTED_EDGE ('', *, *, #19140, .T.);
#19160 = ORIENTED_EDGE ('', *, *, #5880, .T.);
#19170 = ORIENTED_EDGE ('', *, *, #14060, .F.);
#19180 = EDGE_LOOP ('', (#19100, #19150, #19160, #19170));
#19190 = FACE_OUTER_BOUND ('', #19180, .T.);
#19200 = CARTESIAN_POINT ('', (-11.701, -13.984839246877, 14.2976796564404));
#19210 = CARTESIAN_POINT ('', (-11.701, 13.984839246877, 14.2976796564404));
#19220 = CARTESIAN_POINT ('', (-9.99767965644039, -13.984839246877, 16.001));
#19230 = CARTESIAN_POINT ('', (-9.99767965644039, 13.984839246877, 16.001));
#19240 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#19200, #19210), (#19220, #19230)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.40744451736563, 0.00141421356237004), (-53.984839246877, -26.015160753123), .UNSPECIFIED.);
#19250 = ADVANCED_FACE ('', (#19190), #19240, .T.);
#19260 = ORIENTED_EDGE ('', *, *, #5480, .T.);
#19270 = ORIENTED_EDGE ('', *, *, #14260, .T.);
#19280 = ORIENTED_EDGE ('', *, *, #5970, .T.);
#19290 = ORIENTED_EDGE ('', *, *, #19140, .F.);
#19300 = EDGE_LOOP ('', (#19260, #19270, #19280, #19290));
#19310 = FACE_OUTER_BOUND ('', #19300, .T.);
#19320 = CARTESIAN_POINT ('', (-13.4023203435596, -13.984839246877, 16.001));
#19330 = CARTESIAN_POINT ('', (-13.4023203435596, 13.984839246877, 16.001));
#19340 = CARTESIAN_POINT ('', (-11.699, -13.984839246877, 14.2976796564404));
#19350 = CARTESIAN_POINT ('', (-11.699, 13.984839246877, 14.2976796564404));
#19360 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#19320, #19330), (#19340, #19350)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.40744451736561, 0.00141421356237359), (-53.984839246877, -26.015160753123), .UNSPECIFIED.);
#19370 = ADVANCED_FACE ('', (#19310), #19360, .T.);
#19380 = ORIENTED_EDGE ('', *, *, #10700, .T.);
#19390 = ORIENTED_EDGE ('', *, *, #270, .T.);
#19400 = ORIENTED_EDGE ('', *, *, #11190, .T.);
#19410 = CARTESIAN_POINT ('', (22., 42.5, -25.3));
#19420 = CARTESIAN_POINT ('', (22., -42.5, -25.3));
#19430 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#19410, #19420), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#19440 = EDGE_CURVE ('', #11750, #11100, #19430, .T.);
#19450 = ORIENTED_EDGE ('', *, *, #19440, .F.);
#19460 = ORIENTED_EDGE ('', *, *, #11790, .T.);
#19470 = ORIENTED_EDGE ('', *, *, #12160, .T.);
#19480 = EDGE_LOOP ('', (#19380, #19390, #19400, #19450, #19460, #19470));
#19490 = FACE_OUTER_BOUND ('', #19480, .T.);
#19500 = CARTESIAN_POINT ('', (22., 42.501, 9.00100000000002));
#19510 = CARTESIAN_POINT ('', (22., 42.501, -25.301));
#19520 = CARTESIAN_POINT ('', (22., -42.501, 9.001));
#19530 = CARTESIAN_POINT ('', (22., -42.501, -25.301));
#19540 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#19500, #19510), (#19520, #19530)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.000999999999997669, 85.001), (-0.000999999999999446, 34.301), .UNSPECIFIED.);
#19550 = ADVANCED_FACE ('', (#19490), #19540, .T.);
#19560 = ORIENTED_EDGE ('', *, *, #13360, .T.);
#19570 = ORIENTED_EDGE ('', *, *, #1960, .F.);
#19580 = ORIENTED_EDGE ('', *, *, #13820, .F.);
#19590 = ORIENTED_EDGE ('', *, *, #10570, .T.);
#19600 = EDGE_LOOP ('', (#19560, #19570, #19580, #19590));
#19610 = FACE_OUTER_BOUND ('', #19600, .T.);
#19620 = CARTESIAN_POINT ('', (44.001, 21.517804975533, 24.0634410018901));
#19630 = CARTESIAN_POINT ('', (36.499, 21.517804975533, 24.0634410018901));
#19640 = CARTESIAN_POINT ('', (44.001, 30.0007988362387, 11.9484702285176));
#19650 = CARTESIAN_POINT ('', (36.499, 30.0007988362387, 11.9484702285176));
#19660 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#19620, #19630), (#19640, #19650)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00139272848063676, 14.7882557352402), (-0.000999999999997669, 7.501), .UNSPECIFIED.);
#19670 = ADVANCED_FACE ('', (#19610), #19660, .T.);
#19680 = ORIENTED_EDGE ('', *, *, #13420, .T.);
#19690 = ORIENTED_EDGE ('', *, *, #10430, .F.);
#19700 = ORIENTED_EDGE ('', *, *, #13880, .F.);
#19710 = ORIENTED_EDGE ('', *, *, #2110, .T.);
#19720 = EDGE_LOOP ('', (#19680, #19690, #19700, #19710));
#19730 = FACE_OUTER_BOUND ('', #19720, .T.);
#19740 = CARTESIAN_POINT ('', (44.001, 30.001000017453, 30.7499127167312));
#19750 = CARTESIAN_POINT ('', (36.499, 30.001000017453, 30.7499127167312));
#19760 = CARTESIAN_POINT ('', (44.001, 24.9990741590402, 30.7500000168063));
#19770 = CARTESIAN_POINT ('', (36.499, 24.9990741590402, 30.7500000168063));
#19780 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#19740, #19750), (#19760, #19770)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.0010000174531406, 5.00092584172148), (-0.000999999999997669, 7.501), .UNSPECIFIED.);
#19790 = ADVANCED_FACE ('', (#19730), #19780, .T.);
#19800 = ORIENTED_EDGE ('', *, *, #12040, .T.);
#19810 = ORIENTED_EDGE ('', *, *, #11650, .T.);
#19820 = ORIENTED_EDGE ('', *, *, #740, .T.);
#19830 = ORIENTED_EDGE ('', *, *, #12980, .T.);
#19840 = ORIENTED_EDGE ('', *, *, #11410, .T.);
#19850 = ORIENTED_EDGE ('', *, *, #12840, .T.);
#19860 = ORIENTED_EDGE ('', *, *, #12320, .T.);
#19870 = ORIENTED_EDGE ('', *, *, #1310, .F.);
#19880 = EDGE_LOOP ('', (#19800, #19810, #19820, #19830, #19840, #19850, #19860, #19870));
#19890 = FACE_OUTER_BOUND ('', #19880, .T.);
#19900 = CARTESIAN_POINT ('', (0.3, -51.319634533523, 32.501));
#19910 = CARTESIAN_POINT ('', (0.3, -51.319634533523, -48.001));
#19920 = CARTESIAN_POINT ('', (0.3, 42.501, 32.501));
#19930 = CARTESIAN_POINT ('', (0.3, 42.501, -48.001));
#19940 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#19900, #19910), (#19920, #19930)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-51.319634533523, 42.501), (-32.501, 48.001), .UNSPECIFIED.);
#19950 = ADVANCED_FACE ('', (#19890), #19940, .T.);
#19960 = ORIENTED_EDGE ('', *, *, #10220, .T.);
#19970 = CARTESIAN_POINT ('', (0.3, 25.8069758011279, 32.5));
#19980 = CARTESIAN_POINT ('', (0.3, 28.0345770263211, 30.7311492026731));
#19990 = CARTESIAN_POINT ('', (0.3, 30., 28.6749019178793));
#20000 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#19970, #19980, #19990), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (128.451711490888, 136.293732440208), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.997659270416287, 1.))
   REPRESENTATION_ITEM ('')
);
#20010 = EDGE_CURVE ('', #12480, #10180, #20000, .T.);
#20020 = ORIENTED_EDGE ('', *, *, #20010, .F.);
#20030 = ORIENTED_EDGE ('', *, *, #12520, .T.);
#20040 = EDGE_LOOP ('', (#19960, #20020, #20030));
#20050 = FACE_OUTER_BOUND ('', #20040, .T.);
#20060 = CARTESIAN_POINT ('', (0.3, 25.8059758011279, 32.501));
#20070 = CARTESIAN_POINT ('', (0.3, 25.8059758011279, 28.6739019178793));
#20080 = CARTESIAN_POINT ('', (0.3, 30.001, 32.501));
#20090 = CARTESIAN_POINT ('', (0.3, 30.001, 28.6739019178793));
#20100 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#20060, #20070), (#20080, #20090)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (25.8059758011279, 30.001), (-32.501, -28.6739019178793), .UNSPECIFIED.);
#20110 = ADVANCED_FACE ('', (#20050), #20100, .T.);
#20120 = ORIENTED_EDGE ('', *, *, #10890, .T.);
#20130 = ORIENTED_EDGE ('', *, *, #13160, .F.);
#20140 = ORIENTED_EDGE ('', *, *, #12590, .T.);
#20150 = ORIENTED_EDGE ('', *, *, #20010, .T.);
#20160 = EDGE_LOOP ('', (#20120, #20130, #20140, #20150));
#20170 = FACE_OUTER_BOUND ('', #20160, .T.);
#20180 = CARTESIAN_POINT ('', (0.3312, 41.5, 7.62342632469227E-15));
#20190 = CARTESIAN_POINT ('', (-0.0312000000000001, 41.5, 7.62342632469227E-15));
#20200 = CARTESIAN_POINT ('', (0.3312, 41.5, -41.5));
#20210 = CARTESIAN_POINT ('', (-0.0312000000000001, 41.5, -41.5));
#20220 = CARTESIAN_POINT ('', (0.3312, -2.04788483795369E-15, -41.5));
#20230 = CARTESIAN_POINT ('', (-0.0312, -2.04836959075384E-15, -41.5));
#20240 = CARTESIAN_POINT ('', (0.3312, -41.5, -41.5));
#20250 = CARTESIAN_POINT ('', (-0.0312, -41.5, -41.5));
#20260 = CARTESIAN_POINT ('', (0.3312, -41.5, -5.60028318355279E-15));
#20270 = CARTESIAN_POINT ('', (-0.0312, -41.5, -5.60028318355279E-15));
#20280 = CARTESIAN_POINT ('', (0.3312, -41.5, 41.5));
#20290 = CARTESIAN_POINT ('', (-0.0312, -41.5, 41.5));
#20300 = CARTESIAN_POINT ('', (0.3312, -2.03538785626603E-14, 41.5));
#20310 = CARTESIAN_POINT ('', (-0.0312, -2.03543633154604E-14, 41.5));
#20320 = CARTESIAN_POINT ('', (0.3312, 41.5, 41.5));
#20330 = CARTESIAN_POINT ('', (-0.0312000000000001, 41.5, 41.5));
#20340 = CARTESIAN_POINT ('', (0.3312, 41.5, 7.62342632469227E-15));
#20350 = CARTESIAN_POINT ('', (-0.0312000000000001, 41.5, 7.62342632469227E-15));
#20360 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#20180, #20190), (#20200, #20210), (#20220, #20230), (#20240, #20250), (#20260, #20270), (#20280, #20290), (#20300, #20310), (#20320, #20330), (#20340, #20350)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#20370 = ADVANCED_FACE ('', (#20170), #20360, .T.);
#20380 = ORIENTED_EDGE ('', *, *, #11860, .T.);
#20390 = ORIENTED_EDGE ('', *, *, #19440, .T.);
#20400 = ORIENTED_EDGE ('', *, *, #11140, .T.);
#20410 = CARTESIAN_POINT ('', (24., 42.5, -25.3));
#20420 = CARTESIAN_POINT ('', (24., -42.5, -25.3));
#20430 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#20410, #20420), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#20440 = EDGE_CURVE ('', #11820, #11030, #20430, .T.);
#20450 = ORIENTED_EDGE ('', *, *, #20440, .F.);
#20460 = EDGE_LOOP ('', (#20380, #20390, #20400, #20450));
#20470 = FACE_OUTER_BOUND ('', #20460, .T.);
#20480 = CARTESIAN_POINT ('', (24.001, -42.501, -25.3));
#20490 = CARTESIAN_POINT ('', (21.999, -42.501, -25.3));
#20500 = CARTESIAN_POINT ('', (24.001, 42.501, -25.3));
#20510 = CARTESIAN_POINT ('', (21.999, 42.501, -25.3));
#20520 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#20480, #20490), (#20500, #20510)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (2.02137484161571, 87.0233748416157), (-0.00100000000000122, 2.001), .UNSPECIFIED.);
#20530 = ADVANCED_FACE ('', (#20470), #20520, .T.);
#20540 = ORIENTED_EDGE ('', *, *, #11910, .T.);
#20550 = ORIENTED_EDGE ('', *, *, #20440, .T.);
#20560 = ORIENTED_EDGE ('', *, *, #11070, .T.);
#20570 = ORIENTED_EDGE ('', *, *, #10020, .F.);
#20580 = EDGE_LOOP ('', (#20540, #20550, #20560, #20570));
#20590 = FACE_OUTER_BOUND ('', #20580, .T.);
#20600 = CARTESIAN_POINT ('', (24., -42.501, -24.999));
#20610 = CARTESIAN_POINT ('', (24., -42.501, -25.301));
#20620 = CARTESIAN_POINT ('', (24., 42.501, -24.999));
#20630 = CARTESIAN_POINT ('', (24., 42.501, -25.301));
#20640 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#20600, #20610), (#20620, #20630)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (2.02137484161571, 87.0233748416157), (-0.301000000000002, 0.00100000000000122), .UNSPECIFIED.);
#20650 = ADVANCED_FACE ('', (#20590), #20640, .T.);
#20660 = CARTESIAN_POINT ('', (22.5, -42.2, 2.29999999999998));
#20670 = VERTEX_POINT ('', #20660);
#20680 = CARTESIAN_POINT ('', (22.5, -42.2, 8.69999999999999));
#20690 = VERTEX_POINT ('', #20680);
#20700 = CARTESIAN_POINT ('', (22.5, -42.2, 2.29999999999998));
#20710 = CARTESIAN_POINT ('', (22.5, -42.2, 8.69999999999999));
#20720 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#20700, #20710), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#20730 = EDGE_CURVE ('', #20670, #20690, #20720, .T.);
#20740 = ORIENTED_EDGE ('', *, *, #20730, .T.);
#20750 = CARTESIAN_POINT ('', (22.5, 29.7, 8.7));
#20760 = VERTEX_POINT ('', #20750);
#20770 = CARTESIAN_POINT ('', (22.5, -42.2, 8.69999999999999));
#20780 = CARTESIAN_POINT ('', (22.5, 29.7, 8.7));
#20790 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#20770, #20780), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#20800 = EDGE_CURVE ('', #20690, #20760, #20790, .T.);
#20810 = ORIENTED_EDGE ('', *, *, #20800, .T.);
#20820 = CARTESIAN_POINT ('', (22.5, 29.7, 2.3));
#20830 = VERTEX_POINT ('', #20820);
#20840 = CARTESIAN_POINT ('', (22.5, 29.7, 8.7));
#20850 = CARTESIAN_POINT ('', (22.5, 29.7, 2.3));
#20860 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#20840, #20850), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#20870 = EDGE_CURVE ('', #20760, #20830, #20860, .T.);
#20880 = ORIENTED_EDGE ('', *, *, #20870, .T.);
#20890 = CARTESIAN_POINT ('', (22.5, 29.7, 2.3));
#20900 = CARTESIAN_POINT ('', (22.5, -42.2, 2.29999999999998));
#20910 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#20890, #20900), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#20920 = EDGE_CURVE ('', #20830, #20670, #20910, .T.);
#20930 = ORIENTED_EDGE ('', *, *, #20920, .T.);
#20940 = EDGE_LOOP ('', (#20740, #20810, #20880, #20930));
#20950 = FACE_OUTER_BOUND ('', #20940, .T.);
#20960 = CARTESIAN_POINT ('', (22.5, -42.201, 2.29899999999998));
#20970 = CARTESIAN_POINT ('', (22.5, 29.701, 2.299));
#20980 = CARTESIAN_POINT ('', (22.5, -42.201, 8.70099999999998));
#20990 = CARTESIAN_POINT ('', (22.5, 29.701, 8.701));
#21000 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#20960, #20970), (#20980, #20990)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-6.701, -0.299), (-72.201, -0.298999999999996), .UNSPECIFIED.);
#21010 = ADVANCED_FACE ('', (#20950), #21000, .T.);
#21020 = CARTESIAN_POINT ('', (22.8, 30., 2.3));
#21030 = VERTEX_POINT ('', #21020);
#21040 = CARTESIAN_POINT ('', (22.8, 30., 8.7));
#21050 = VERTEX_POINT ('', #21040);
#21060 = CARTESIAN_POINT ('', (22.8, 30., 2.3));
#21070 = CARTESIAN_POINT ('', (22.8, 30., 8.7));
#21080 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#21060, #21070), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#21090 = EDGE_CURVE ('', #21030, #21050, #21080, .T.);
#21100 = ORIENTED_EDGE ('', *, *, #21090, .T.);
#21110 = CARTESIAN_POINT ('', (43.2, 30., 8.7));
#21120 = VERTEX_POINT ('', #21110);
#21130 = CARTESIAN_POINT ('', (22.8, 30., 8.7));
#21140 = CARTESIAN_POINT ('', (43.2, 30., 8.7));
#21150 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#21130, #21140), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#21160 = EDGE_CURVE ('', #21050, #21120, #21150, .T.);
#21170 = ORIENTED_EDGE ('', *, *, #21160, .T.);
#21180 = CARTESIAN_POINT ('', (43.2, 30., 2.3));
#21190 = VERTEX_POINT ('', #21180);
#21200 = CARTESIAN_POINT ('', (43.2, 30., 8.7));
#21210 = CARTESIAN_POINT ('', (43.2, 30., 2.3));
#21220 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#21200, #21210), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#21230 = EDGE_CURVE ('', #21120, #21190, #21220, .T.);
#21240 = ORIENTED_EDGE ('', *, *, #21230, .T.);
#21250 = CARTESIAN_POINT ('', (43.2, 30., 2.3));
#21260 = CARTESIAN_POINT ('', (22.8, 30., 2.3));
#21270 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#21250, #21260), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#21280 = EDGE_CURVE ('', #21190, #21030, #21270, .T.);
#21290 = ORIENTED_EDGE ('', *, *, #21280, .T.);
#21300 = EDGE_LOOP ('', (#21100, #21170, #21240, #21290));
#21310 = FACE_OUTER_BOUND ('', #21300, .T.);
#21320 = CARTESIAN_POINT ('', (43.201, 30., 8.701));
#21330 = CARTESIAN_POINT ('', (22.799, 30., 8.701));
#21340 = CARTESIAN_POINT ('', (43.201, 30., 2.299));
#21350 = CARTESIAN_POINT ('', (22.799, 30., 2.299));
#21360 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#21320, #21330), (#21340, #21350)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.299, 6.701), (-20.701, -0.298999999999999), .UNSPECIFIED.);
#21370 = ADVANCED_FACE ('', (#21310), #21360, .T.);
#21380 = CARTESIAN_POINT ('', (43.5, 29.7, 2.3));
#21390 = VERTEX_POINT ('', #21380);
#21400 = CARTESIAN_POINT ('', (43.5, 29.7, 8.7));
#21410 = VERTEX_POINT ('', #21400);
#21420 = CARTESIAN_POINT ('', (43.5, 29.7, 2.3));
#21430 = CARTESIAN_POINT ('', (43.5, 29.7, 8.7));
#21440 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#21420, #21430), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#21450 = EDGE_CURVE ('', #21390, #21410, #21440, .T.);
#21460 = ORIENTED_EDGE ('', *, *, #21450, .T.);
#21470 = CARTESIAN_POINT ('', (43.5, -42.2, 8.69999999999999));
#21480 = VERTEX_POINT ('', #21470);
#21490 = CARTESIAN_POINT ('', (43.5, 29.7, 8.7));
#21500 = CARTESIAN_POINT ('', (43.5, -42.2, 8.69999999999999));
#21510 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#21490, #21500), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#21520 = EDGE_CURVE ('', #21410, #21480, #21510, .T.);
#21530 = ORIENTED_EDGE ('', *, *, #21520, .T.);
#21540 = CARTESIAN_POINT ('', (43.5, -42.2, 2.29999999999998));
#21550 = VERTEX_POINT ('', #21540);
#21560 = CARTESIAN_POINT ('', (43.5, -42.2, 8.69999999999999));
#21570 = CARTESIAN_POINT ('', (43.5, -42.2, 2.29999999999998));
#21580 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#21560, #21570), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#21590 = EDGE_CURVE ('', #21480, #21550, #21580, .T.);
#21600 = ORIENTED_EDGE ('', *, *, #21590, .T.);
#21610 = CARTESIAN_POINT ('', (43.5, -42.2, 2.29999999999998));
#21620 = CARTESIAN_POINT ('', (43.5, 29.7, 2.3));
#21630 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#21610, #21620), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#21640 = EDGE_CURVE ('', #21550, #21390, #21630, .T.);
#21650 = ORIENTED_EDGE ('', *, *, #21640, .T.);
#21660 = EDGE_LOOP ('', (#21460, #21530, #21600, #21650));
#21670 = FACE_OUTER_BOUND ('', #21660, .T.);
#21680 = CARTESIAN_POINT ('', (43.5, -42.201, 8.70099999999998));
#21690 = CARTESIAN_POINT ('', (43.5, 29.701, 8.701));
#21700 = CARTESIAN_POINT ('', (43.5, -42.201, 2.29899999999998));
#21710 = CARTESIAN_POINT ('', (43.5, 29.701, 2.299));
#21720 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#21680, #21690), (#21700, #21710)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.299, 6.701), (-72.201, -0.298999999999996), .UNSPECIFIED.);
#21730 = ADVANCED_FACE ('', (#21670), #21720, .T.);
#21740 = CARTESIAN_POINT ('', (43.2, -42.5, 2.29999999999998));
#21750 = VERTEX_POINT ('', #21740);
#21760 = CARTESIAN_POINT ('', (43.2, -42.5, 8.69999999999999));
#21770 = VERTEX_POINT ('', #21760);
#21780 = CARTESIAN_POINT ('', (43.2, -42.5, 2.29999999999998));
#21790 = CARTESIAN_POINT ('', (43.2, -42.5, 8.69999999999999));
#21800 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#21780, #21790), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#21810 = EDGE_CURVE ('', #21750, #21770, #21800, .T.);
#21820 = ORIENTED_EDGE ('', *, *, #21810, .T.);
#21830 = CARTESIAN_POINT ('', (22.8, -42.5, 8.69999999999999));
#21840 = VERTEX_POINT ('', #21830);
#21850 = CARTESIAN_POINT ('', (43.2, -42.5, 8.69999999999999));
#21860 = CARTESIAN_POINT ('', (22.8, -42.5, 8.69999999999999));
#21870 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#21850, #21860), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#21880 = EDGE_CURVE ('', #21770, #21840, #21870, .T.);
#21890 = ORIENTED_EDGE ('', *, *, #21880, .T.);
#21900 = CARTESIAN_POINT ('', (22.8, -42.5, 2.29999999999998));
#21910 = VERTEX_POINT ('', #21900);
#21920 = CARTESIAN_POINT ('', (22.8, -42.5, 8.69999999999999));
#21930 = CARTESIAN_POINT ('', (22.8, -42.5, 2.29999999999998));
#21940 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#21920, #21930), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#21950 = EDGE_CURVE ('', #21840, #21910, #21940, .T.);
#21960 = ORIENTED_EDGE ('', *, *, #21950, .T.);
#21970 = CARTESIAN_POINT ('', (22.8, -42.5, 2.29999999999998));
#21980 = CARTESIAN_POINT ('', (43.2, -42.5, 2.29999999999998));
#21990 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#21970, #21980), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#22000 = EDGE_CURVE ('', #21910, #21750, #21990, .T.);
#22010 = ORIENTED_EDGE ('', *, *, #22000, .T.);
#22020 = EDGE_LOOP ('', (#21820, #21890, #21960, #22010));
#22030 = FACE_OUTER_BOUND ('', #22020, .T.);
#22040 = CARTESIAN_POINT ('', (43.201, -42.5, 2.29899999999998));
#22050 = CARTESIAN_POINT ('', (22.799, -42.5, 2.29899999999998));
#22060 = CARTESIAN_POINT ('', (43.201, -42.5, 8.70099999999998));
#22070 = CARTESIAN_POINT ('', (22.799, -42.5, 8.70099999999998));
#22080 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#22040, #22050), (#22060, #22070)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-6.701, -0.299), (-20.701, -0.298999999999999), .UNSPECIFIED.);
#22090 = ADVANCED_FACE ('', (#22030), #22080, .T.);
#22100 = CARTESIAN_POINT ('', (22.8, -42.2, 1.99999999999998));
#22110 = VERTEX_POINT ('', #22100);
#22120 = CARTESIAN_POINT ('', (22.8, 29.7, 2.));
#22130 = VERTEX_POINT ('', #22120);
#22140 = CARTESIAN_POINT ('', (22.8, -42.2, 1.99999999999998));
#22150 = CARTESIAN_POINT ('', (22.8, 29.7, 2.));
#22160 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#22140, #22150), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#22170 = EDGE_CURVE ('', #22110, #22130, #22160, .T.);
#22180 = ORIENTED_EDGE ('', *, *, #22170, .T.);
#22190 = CARTESIAN_POINT ('', (43.2, 29.7, 2.));
#22200 = VERTEX_POINT ('', #22190);
#22210 = CARTESIAN_POINT ('', (22.8, 29.7, 2.));
#22220 = CARTESIAN_POINT ('', (43.2, 29.7, 2.));
#22230 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#22210, #22220), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#22240 = EDGE_CURVE ('', #22130, #22200, #22230, .T.);
#22250 = ORIENTED_EDGE ('', *, *, #22240, .T.);
#22260 = CARTESIAN_POINT ('', (43.2, -42.2, 1.99999999999998));
#22270 = VERTEX_POINT ('', #22260);
#22280 = CARTESIAN_POINT ('', (43.2, 29.7, 2.));
#22290 = CARTESIAN_POINT ('', (43.2, -42.2, 1.99999999999998));
#22300 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#22280, #22290), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#22310 = EDGE_CURVE ('', #22200, #22270, #22300, .T.);
#22320 = ORIENTED_EDGE ('', *, *, #22310, .T.);
#22330 = CARTESIAN_POINT ('', (43.2, -42.2, 1.99999999999998));
#22340 = CARTESIAN_POINT ('', (22.8, -42.2, 1.99999999999998));
#22350 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#22330, #22340), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#22360 = EDGE_CURVE ('', #22270, #22110, #22350, .T.);
#22370 = ORIENTED_EDGE ('', *, *, #22360, .T.);
#22380 = EDGE_LOOP ('', (#22180, #22250, #22320, #22370));
#22390 = FACE_OUTER_BOUND ('', #22380, .T.);
#22400 = CARTESIAN_POINT ('', (43.201, -42.201, 1.99999999999998));
#22410 = CARTESIAN_POINT ('', (43.201, 29.701, 2.));
#22420 = CARTESIAN_POINT ('', (22.799, -42.201, 1.99999999999998));
#22430 = CARTESIAN_POINT ('', (22.799, 29.701, 2.));
#22440 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#22400, #22410), (#22420, #22430)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.298999999999999, 20.701), (0.298999999999999, 72.201), .UNSPECIFIED.);
#22450 = ADVANCED_FACE ('', (#22390), #22440, .T.);
#22460 = CARTESIAN_POINT ('', (22.8, -42.2, 1.99999999999998));
#22470 = CARTESIAN_POINT ('', (22.8, -42.5, 2.29999999999998));
#22480 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#22460, #22470), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#22490 = EDGE_CURVE ('', #22110, #21910, #22480, .T.);
#22500 = ORIENTED_EDGE ('', *, *, #22490, .F.);
#22510 = ORIENTED_EDGE ('', *, *, #22360, .F.);
#22520 = CARTESIAN_POINT ('', (43.2, -42.5, 2.29999999999998));
#22530 = CARTESIAN_POINT ('', (43.2, -42.2, 1.99999999999998));
#22540 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#22520, #22530), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#22550 = EDGE_CURVE ('', #21750, #22270, #22540, .T.);
#22560 = ORIENTED_EDGE ('', *, *, #22550, .F.);
#22570 = ORIENTED_EDGE ('', *, *, #22000, .F.);
#22580 = EDGE_LOOP ('', (#22500, #22510, #22560, #22570));
#22590 = FACE_OUTER_BOUND ('', #22580, .T.);
#22600 = CARTESIAN_POINT ('', (43.201, -42.199, 1.99899999999998));
#22610 = CARTESIAN_POINT ('', (22.799, -42.199, 1.99899999999998));
#22620 = CARTESIAN_POINT ('', (43.201, -42.501, 2.30099999999998));
#22630 = CARTESIAN_POINT ('', (22.799, -42.501, 2.30099999999998));
#22640 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#22600, #22610), (#22620, #22630)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.425678282274298, 0.00141421356237004), (-20.701, -0.298999999999999), .UNSPECIFIED.);
#22650 = ADVANCED_FACE ('', (#22590), #22640, .T.);
#22660 = CARTESIAN_POINT ('', (22.8, -42.2, 1.99999999999998));
#22670 = CARTESIAN_POINT ('', (22.5, -42.2, 2.29999999999998));
#22680 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#22660, #22670), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#22690 = EDGE_CURVE ('', #22110, #20670, #22680, .T.);
#22700 = ORIENTED_EDGE ('', *, *, #22690, .F.);
#22710 = ORIENTED_EDGE ('', *, *, #22490, .T.);
#22720 = CARTESIAN_POINT ('', (22.5, -42.2, 2.29999999999998));
#22730 = CARTESIAN_POINT ('', (22.8, -42.5, 2.29999999999998));
#22740 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#22720, #22730), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#22750 = EDGE_CURVE ('', #20670, #21910, #22740, .T.);
#22760 = ORIENTED_EDGE ('', *, *, #22750, .F.);
#22770 = EDGE_LOOP ('', (#22700, #22710, #22760));
#22780 = FACE_OUTER_BOUND ('', #22770, .T.);
#22790 = CARTESIAN_POINT ('', (22.6496666666667, -42.0483333333333, 1.99866666666665));
#22800 = CARTESIAN_POINT ('', (22.4483333333333, -42.2496666666667, 2.40133333333331));
#22810 = CARTESIAN_POINT ('', (22.9516666666667, -42.3503333333333, 1.99866666666665));
#22820 = CARTESIAN_POINT ('', (22.7503333333333, -42.5516666666667, 2.40133333333331));
#22830 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#22790, #22800), (#22810, #22820)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.425678282274298, 0.00141421356237004), (-0.369056454579333, 0.12410748030101), .UNSPECIFIED.);
#22840 = ADVANCED_FACE ('', (#22780), #22830, .T.);
#22850 = CARTESIAN_POINT ('', (43.2, -42.5, 2.29999999999998));
#22860 = CARTESIAN_POINT ('', (43.5, -42.2, 2.29999999999998));
#22870 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#22850, #22860), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#22880 = EDGE_CURVE ('', #21750, #21550, #22870, .T.);
#22890 = ORIENTED_EDGE ('', *, *, #22880, .F.);
#22900 = ORIENTED_EDGE ('', *, *, #22550, .T.);
#22910 = CARTESIAN_POINT ('', (43.5, -42.2, 2.29999999999998));
#22920 = CARTESIAN_POINT ('', (43.2, -42.2, 1.99999999999998));
#22930 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#22910, #22920), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#22940 = EDGE_CURVE ('', #21550, #22270, #22930, .T.);
#22950 = ORIENTED_EDGE ('', *, *, #22940, .F.);
#22960 = EDGE_LOOP ('', (#22890, #22900, #22950));
#22970 = FACE_OUTER_BOUND ('', #22960, .T.);
#22980 = CARTESIAN_POINT ('', (43.0483333333333, -42.3503333333333, 1.99866666666665));
#22990 = CARTESIAN_POINT ('', (43.2496666666667, -42.5516666666667, 2.40133333333331));
#23000 = CARTESIAN_POINT ('', (43.3503333333333, -42.0483333333333, 1.99866666666665));
#23010 = CARTESIAN_POINT ('', (43.5516666666666, -42.2496666666667, 2.40133333333331));
#23020 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#22980, #22990), (#23000, #23010)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.425678282274294, 0.00141421356237004), (-0.369056454579329, 0.124107480301006), .UNSPECIFIED.);
#23030 = ADVANCED_FACE ('', (#22970), #23020, .T.);
#23040 = ORIENTED_EDGE ('', *, *, #22750, .T.);
#23050 = ORIENTED_EDGE ('', *, *, #21950, .F.);
#23060 = CARTESIAN_POINT ('', (22.5, -42.2, 8.69999999999999));
#23070 = CARTESIAN_POINT ('', (22.8, -42.5, 8.69999999999999));
#23080 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#23060, #23070), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#23090 = EDGE_CURVE ('', #20690, #21840, #23080, .T.);
#23100 = ORIENTED_EDGE ('', *, *, #23090, .F.);
#23110 = ORIENTED_EDGE ('', *, *, #20730, .F.);
#23120 = EDGE_LOOP ('', (#23040, #23050, #23100, #23110));
#23130 = FACE_OUTER_BOUND ('', #23120, .T.);
#23140 = CARTESIAN_POINT ('', (22.499, -42.199, 2.29899999999998));
#23150 = CARTESIAN_POINT ('', (22.499, -42.199, 8.70099999999998));
#23160 = CARTESIAN_POINT ('', (22.801, -42.501, 2.29899999999998));
#23170 = CARTESIAN_POINT ('', (22.801, -42.501, 8.70099999999998));
#23180 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#23140, #23150), (#23160, #23170)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.425678282274291, 0.00141421356237714), (0.299, 6.701), .UNSPECIFIED.);
#23190 = ADVANCED_FACE ('', (#23130), #23180, .T.);
#23200 = ORIENTED_EDGE ('', *, *, #22690, .T.);
#23210 = ORIENTED_EDGE ('', *, *, #20920, .F.);
#23220 = CARTESIAN_POINT ('', (22.8, 29.7, 2.));
#23230 = CARTESIAN_POINT ('', (22.5, 29.7, 2.3));
#23240 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#23220, #23230), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#23250 = EDGE_CURVE ('', #22130, #20830, #23240, .T.);
#23260 = ORIENTED_EDGE ('', *, *, #23250, .F.);
#23270 = ORIENTED_EDGE ('', *, *, #22170, .F.);
#23280 = EDGE_LOOP ('', (#23200, #23210, #23260, #23270));
#23290 = FACE_OUTER_BOUND ('', #23280, .T.);
#23300 = CARTESIAN_POINT ('', (22.801, -42.201, 1.99899999999998));
#23310 = CARTESIAN_POINT ('', (22.801, 29.701, 1.99899999999999));
#23320 = CARTESIAN_POINT ('', (22.499, -42.201, 2.30099999999998));
#23330 = CARTESIAN_POINT ('', (22.499, 29.701, 2.301));
#23340 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#23300, #23310), (#23320, #23330)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.425678282274303, 0.00141421356237537), (0.298999999999999, 72.201), .UNSPECIFIED.);
#23350 = ADVANCED_FACE ('', (#23290), #23340, .T.);
#23360 = CARTESIAN_POINT ('', (43.2, 29.7, 2.));
#23370 = CARTESIAN_POINT ('', (43.2, 30., 2.3));
#23380 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#23360, #23370), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#23390 = EDGE_CURVE ('', #22200, #21190, #23380, .T.);
#23400 = ORIENTED_EDGE ('', *, *, #23390, .F.);
#23410 = ORIENTED_EDGE ('', *, *, #22240, .F.);
#23420 = CARTESIAN_POINT ('', (22.8, 30., 2.3));
#23430 = CARTESIAN_POINT ('', (22.8, 29.7, 2.));
#23440 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#23420, #23430), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#23450 = EDGE_CURVE ('', #21030, #22130, #23440, .T.);
#23460 = ORIENTED_EDGE ('', *, *, #23450, .F.);
#23470 = ORIENTED_EDGE ('', *, *, #21280, .F.);
#23480 = EDGE_LOOP ('', (#23400, #23410, #23460, #23470));
#23490 = FACE_OUTER_BOUND ('', #23480, .T.);
#23500 = CARTESIAN_POINT ('', (43.201, 30.001, 2.301));
#23510 = CARTESIAN_POINT ('', (22.799, 30.001, 2.301));
#23520 = CARTESIAN_POINT ('', (43.201, 29.699, 1.999));
#23530 = CARTESIAN_POINT ('', (22.799, 29.699, 1.999));
#23540 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#23500, #23510), (#23520, #23530)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00141421356237359, 0.425678282274301), (-20.701, -0.298999999999999), .UNSPECIFIED.);
#23550 = ADVANCED_FACE ('', (#23490), #23540, .T.);
#23560 = ORIENTED_EDGE ('', *, *, #22940, .T.);
#23570 = ORIENTED_EDGE ('', *, *, #22310, .F.);
#23580 = CARTESIAN_POINT ('', (43.5, 29.7, 2.3));
#23590 = CARTESIAN_POINT ('', (43.2, 29.7, 2.));
#23600 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#23580, #23590), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#23610 = EDGE_CURVE ('', #21390, #22200, #23600, .T.);
#23620 = ORIENTED_EDGE ('', *, *, #23610, .F.);
#23630 = ORIENTED_EDGE ('', *, *, #21640, .F.);
#23640 = EDGE_LOOP ('', (#23560, #23570, #23620, #23630));
#23650 = FACE_OUTER_BOUND ('', #23640, .T.);
#23660 = CARTESIAN_POINT ('', (43.501, -42.201, 2.30099999999998));
#23670 = CARTESIAN_POINT ('', (43.501, 29.701, 2.30099999999999));
#23680 = CARTESIAN_POINT ('', (43.199, -42.201, 1.99899999999998));
#23690 = CARTESIAN_POINT ('', (43.199, 29.701, 1.999));
#23700 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#23660, #23670), (#23680, #23690)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00141421356237359, 0.425678282274298), (0.298999999999999, 72.201), .UNSPECIFIED.);
#23710 = ADVANCED_FACE ('', (#23650), #23700, .T.);
#23720 = ORIENTED_EDGE ('', *, *, #22880, .T.);
#23730 = ORIENTED_EDGE ('', *, *, #21590, .F.);
#23740 = CARTESIAN_POINT ('', (43.2, -42.5, 8.69999999999999));
#23750 = CARTESIAN_POINT ('', (43.5, -42.2, 8.69999999999999));
#23760 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#23740, #23750), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#23770 = EDGE_CURVE ('', #21770, #21480, #23760, .T.);
#23780 = ORIENTED_EDGE ('', *, *, #23770, .F.);
#23790 = ORIENTED_EDGE ('', *, *, #21810, .F.);
#23800 = EDGE_LOOP ('', (#23720, #23730, #23780, #23790));
#23810 = FACE_OUTER_BOUND ('', #23800, .T.);
#23820 = CARTESIAN_POINT ('', (43.199, -42.501, 2.29899999999998));
#23830 = CARTESIAN_POINT ('', (43.199, -42.501, 8.70099999999998));
#23840 = CARTESIAN_POINT ('', (43.501, -42.199, 2.29899999999998));
#23850 = CARTESIAN_POINT ('', (43.501, -42.199, 8.70099999999998));
#23860 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#23820, #23830), (#23840, #23850)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.425678282274294, 0.00141421356237004), (0.299, 6.701), .UNSPECIFIED.);
#23870 = ADVANCED_FACE ('', (#23810), #23860, .T.);
#23880 = CARTESIAN_POINT ('', (22.8, -42.5, 8.69999999999999));
#23890 = CARTESIAN_POINT ('', (22.8, -42.2, 8.99999999999998));
#23900 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#23880, #23890), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#23910 = EDGE_CURVE ('', #21840, #320, #23900, .T.);
#23920 = ORIENTED_EDGE ('', *, *, #23910, .F.);
#23930 = ORIENTED_EDGE ('', *, *, #21880, .F.);
#23940 = CARTESIAN_POINT ('', (43.2, -42.2, 8.99999999999999));
#23950 = CARTESIAN_POINT ('', (43.2, -42.5, 8.69999999999999));
#23960 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#23940, #23950), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#23970 = EDGE_CURVE ('', #340, #21770, #23960, .T.);
#23980 = ORIENTED_EDGE ('', *, *, #23970, .F.);
#23990 = ORIENTED_EDGE ('', *, *, #380, .F.);
#24000 = EDGE_LOOP ('', (#23920, #23930, #23980, #23990));
#24010 = FACE_OUTER_BOUND ('', #24000, .T.);
#24020 = CARTESIAN_POINT ('', (43.201, -42.501, 8.69899999999999));
#24030 = CARTESIAN_POINT ('', (22.799, -42.501, 8.69899999999999));
#24040 = CARTESIAN_POINT ('', (43.201, -42.199, 9.00099999999999));
#24050 = CARTESIAN_POINT ('', (22.799, -42.199, 9.00099999999999));
#24060 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#24020, #24030), (#24040, #24050)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00141421356237004, 0.425678282274305), (-20.701, -0.298999999999999), .UNSPECIFIED.);
#24070 = ADVANCED_FACE ('', (#24010), #24060, .T.);
#24080 = ORIENTED_EDGE ('', *, *, #23090, .T.);
#24090 = ORIENTED_EDGE ('', *, *, #23910, .T.);
#24100 = CARTESIAN_POINT ('', (22.5, -42.2, 8.69999999999999));
#24110 = CARTESIAN_POINT ('', (22.8, -42.2, 8.99999999999998));
#24120 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#24100, #24110), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#24130 = EDGE_CURVE ('', #20690, #320, #24120, .T.);
#24140 = ORIENTED_EDGE ('', *, *, #24130, .F.);
#24150 = EDGE_LOOP ('', (#24080, #24090, #24140));
#24160 = FACE_OUTER_BOUND ('', #24150, .T.);
#24170 = CARTESIAN_POINT ('', (22.4483333333333, -42.2496666666667, 8.59866666666665));
#24180 = CARTESIAN_POINT ('', (22.6496666666667, -42.0483333333333, 9.00133333333332));
#24190 = CARTESIAN_POINT ('', (22.7503333333333, -42.5516666666667, 8.59866666666665));
#24200 = CARTESIAN_POINT ('', (22.9516666666667, -42.3503333333333, 9.00133333333332));
#24210 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#24170, #24180), (#24190, #24200)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.213546247918337, 0.213546247918337), (-0.491530941718487, 0.00163299316185572), .UNSPECIFIED.);
#24220 = ADVANCED_FACE ('', (#24160), #24210, .T.);
#24230 = ORIENTED_EDGE ('', *, *, #23450, .T.);
#24240 = ORIENTED_EDGE ('', *, *, #23250, .T.);
#24250 = CARTESIAN_POINT ('', (22.8, 30., 2.3));
#24260 = CARTESIAN_POINT ('', (22.5, 29.7, 2.3));
#24270 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#24250, #24260), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#24280 = EDGE_CURVE ('', #21030, #20830, #24270, .T.);
#24290 = ORIENTED_EDGE ('', *, *, #24280, .F.);
#24300 = EDGE_LOOP ('', (#24230, #24240, #24290));
#24310 = FACE_OUTER_BOUND ('', #24300, .T.);
#24320 = CARTESIAN_POINT ('', (22.9516666666667, 29.8503333333333, 1.99866666666666));
#24330 = CARTESIAN_POINT ('', (22.7503333333333, 30.0516666666667, 2.40133333333333));
#24340 = CARTESIAN_POINT ('', (22.6496666666667, 29.5483333333333, 1.99866666666666));
#24350 = CARTESIAN_POINT ('', (22.4483333333333, 29.7496666666667, 2.40133333333333));
#24360 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#24320, #24330), (#24340, #24350)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.425678282274305, 0.00141421356237714), (-0.369056454579335, 0.124107480301012), .UNSPECIFIED.);
#24370 = ADVANCED_FACE ('', (#24310), #24360, .T.);
#24380 = ORIENTED_EDGE ('', *, *, #23610, .T.);
#24390 = ORIENTED_EDGE ('', *, *, #23390, .T.);
#24400 = CARTESIAN_POINT ('', (43.5, 29.7, 2.3));
#24410 = CARTESIAN_POINT ('', (43.2, 30., 2.3));
#24420 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#24400, #24410), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#24430 = EDGE_CURVE ('', #21390, #21190, #24420, .T.);
#24440 = ORIENTED_EDGE ('', *, *, #24430, .F.);
#24450 = EDGE_LOOP ('', (#24380, #24390, #24440));
#24460 = FACE_OUTER_BOUND ('', #24450, .T.);
#24470 = CARTESIAN_POINT ('', (43.3503333333333, 29.5483333333333, 1.99866666666666));
#24480 = CARTESIAN_POINT ('', (43.5516666666667, 29.7496666666667, 2.40133333333332));
#24490 = CARTESIAN_POINT ('', (43.0483333333333, 29.8503333333333, 1.99866666666666));
#24500 = CARTESIAN_POINT ('', (43.2496666666667, 30.0516666666667, 2.40133333333332));
#24510 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#24470, #24480), (#24490, #24500)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.425678282274301, 0.00141421356237004), (-0.369056454579329, 0.124107480301006), .UNSPECIFIED.);
#24520 = ADVANCED_FACE ('', (#24460), #24510, .T.);
#24530 = ORIENTED_EDGE ('', *, *, #23970, .T.);
#24540 = ORIENTED_EDGE ('', *, *, #23770, .T.);
#24550 = CARTESIAN_POINT ('', (43.2, -42.2, 8.99999999999999));
#24560 = CARTESIAN_POINT ('', (43.5, -42.2, 8.69999999999999));
#24570 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#24550, #24560), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#24580 = EDGE_CURVE ('', #340, #21480, #24570, .T.);
#24590 = ORIENTED_EDGE ('', *, *, #24580, .F.);
#24600 = EDGE_LOOP ('', (#24530, #24540, #24590));
#24610 = FACE_OUTER_BOUND ('', #24600, .T.);
#24620 = CARTESIAN_POINT ('', (43.5013333333333, -42.3503333333333, 8.54833333333332));
#24630 = CARTESIAN_POINT ('', (43.0986666666667, -42.5516666666667, 8.74966666666665));
#24640 = CARTESIAN_POINT ('', (43.5013333333333, -42.0483333333333, 8.85033333333332));
#24650 = CARTESIAN_POINT ('', (43.0986666666667, -42.2496666666667, 9.05166666666665));
#24660 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#24620, #24630), (#24640, #24650)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.425678282274301, 0.00141421356237714), (-0.369056454579329, 0.12410748030101), .UNSPECIFIED.);
#24670 = ADVANCED_FACE ('', (#24610), #24660, .T.);
#24680 = ORIENTED_EDGE ('', *, *, #24130, .T.);
#24690 = ORIENTED_EDGE ('', *, *, #570, .F.);
#24700 = CARTESIAN_POINT ('', (22.5, 29.7, 8.7));
#24710 = CARTESIAN_POINT ('', (22.8, 29.7, 8.99999999999999));
#24720 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#24700, #24710), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#24730 = EDGE_CURVE ('', #20760, #480, #24720, .T.);
#24740 = ORIENTED_EDGE ('', *, *, #24730, .F.);
#24750 = ORIENTED_EDGE ('', *, *, #20800, .F.);
#24760 = EDGE_LOOP ('', (#24680, #24690, #24740, #24750));
#24770 = FACE_OUTER_BOUND ('', #24760, .T.);
#24780 = CARTESIAN_POINT ('', (22.499, -42.201, 8.69899999999998));
#24790 = CARTESIAN_POINT ('', (22.499, 29.701, 8.69899999999999));
#24800 = CARTESIAN_POINT ('', (22.801, -42.201, 9.00099999999999));
#24810 = CARTESIAN_POINT ('', (22.801, 29.701, 9.001));
#24820 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#24780, #24790), (#24800, #24810)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00141421356237359, 0.425678282274301), (-72.201, -0.298999999999996), .UNSPECIFIED.);
#24830 = ADVANCED_FACE ('', (#24770), #24820, .T.);
#24840 = ORIENTED_EDGE ('', *, *, #24280, .T.);
#24850 = ORIENTED_EDGE ('', *, *, #20870, .F.);
#24860 = CARTESIAN_POINT ('', (22.8, 30., 8.7));
#24870 = CARTESIAN_POINT ('', (22.5, 29.7, 8.7));
#24880 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#24860, #24870), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#24890 = EDGE_CURVE ('', #21050, #20760, #24880, .T.);
#24900 = ORIENTED_EDGE ('', *, *, #24890, .F.);
#24910 = ORIENTED_EDGE ('', *, *, #21090, .F.);
#24920 = EDGE_LOOP ('', (#24840, #24850, #24900, #24910));
#24930 = FACE_OUTER_BOUND ('', #24920, .T.);
#24940 = CARTESIAN_POINT ('', (22.801, 30.001, 2.299));
#24950 = CARTESIAN_POINT ('', (22.801, 30.001, 8.701));
#24960 = CARTESIAN_POINT ('', (22.499, 29.699, 2.299));
#24970 = CARTESIAN_POINT ('', (22.499, 29.699, 8.701));
#24980 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#24940, #24950), (#24960, #24970)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.425678282274305, 0.00141421356237714), (0.299, 6.701), .UNSPECIFIED.);
#24990 = ADVANCED_FACE ('', (#24930), #24980, .T.);
#25000 = ORIENTED_EDGE ('', *, *, #24430, .T.);
#25010 = ORIENTED_EDGE ('', *, *, #21230, .F.);
#25020 = CARTESIAN_POINT ('', (43.5, 29.7, 8.7));
#25030 = CARTESIAN_POINT ('', (43.2, 30., 8.7));
#25040 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#25020, #25030), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#25050 = EDGE_CURVE ('', #21410, #21120, #25040, .T.);
#25060 = ORIENTED_EDGE ('', *, *, #25050, .F.);
#25070 = ORIENTED_EDGE ('', *, *, #21450, .F.);
#25080 = EDGE_LOOP ('', (#25000, #25010, #25060, #25070));
#25090 = FACE_OUTER_BOUND ('', #25080, .T.);
#25100 = CARTESIAN_POINT ('', (43.501, 29.699, 2.299));
#25110 = CARTESIAN_POINT ('', (43.501, 29.699, 8.701));
#25120 = CARTESIAN_POINT ('', (43.199, 30.001, 2.299));
#25130 = CARTESIAN_POINT ('', (43.199, 30.001, 8.701));
#25140 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#25100, #25110), (#25120, #25130)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.425678282274298, 0.00141421356237359), (0.299, 6.701), .UNSPECIFIED.);
#25150 = ADVANCED_FACE ('', (#25090), #25140, .T.);
#25160 = ORIENTED_EDGE ('', *, *, #24580, .T.);
#25170 = ORIENTED_EDGE ('', *, *, #21520, .F.);
#25180 = CARTESIAN_POINT ('', (43.2, 29.7, 8.99999999999999));
#25190 = CARTESIAN_POINT ('', (43.5, 29.7, 8.7));
#25200 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#25180, #25190), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#25210 = EDGE_CURVE ('', #410, #21410, #25200, .T.);
#25220 = ORIENTED_EDGE ('', *, *, #25210, .F.);
#25230 = ORIENTED_EDGE ('', *, *, #450, .F.);
#25240 = EDGE_LOOP ('', (#25160, #25170, #25220, #25230));
#25250 = FACE_OUTER_BOUND ('', #25240, .T.);
#25260 = CARTESIAN_POINT ('', (43.199, -42.201, 9.00099999999999));
#25270 = CARTESIAN_POINT ('', (43.199, 29.701, 9.001));
#25280 = CARTESIAN_POINT ('', (43.501, -42.201, 8.69899999999999));
#25290 = CARTESIAN_POINT ('', (43.501, 29.701, 8.699));
#25300 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#25260, #25270), (#25280, #25290)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.425678282274308, 0.00141421356237004), (-72.201, -0.298999999999996), .UNSPECIFIED.);
#25310 = ADVANCED_FACE ('', (#25250), #25300, .T.);
#25320 = ORIENTED_EDGE ('', *, *, #24890, .T.);
#25330 = ORIENTED_EDGE ('', *, *, #24730, .T.);
#25340 = CARTESIAN_POINT ('', (22.8, 30., 8.7));
#25350 = CARTESIAN_POINT ('', (22.8, 29.7, 8.99999999999999));
#25360 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#25340, #25350), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#25370 = EDGE_CURVE ('', #21050, #480, #25360, .T.);
#25380 = ORIENTED_EDGE ('', *, *, #25370, .F.);
#25390 = EDGE_LOOP ('', (#25320, #25330, #25380));
#25400 = FACE_OUTER_BOUND ('', #25390, .T.);
#25410 = CARTESIAN_POINT ('', (22.7503333333333, 30.0516666666667, 8.59866666666666));
#25420 = CARTESIAN_POINT ('', (22.9516666666667, 29.8503333333333, 9.00133333333333));
#25430 = CARTESIAN_POINT ('', (22.4483333333333, 29.7496666666667, 8.59866666666666));
#25440 = CARTESIAN_POINT ('', (22.6496666666667, 29.5483333333333, 9.00133333333333));
#25450 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#25410, #25420), (#25430, #25440)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.213546247918337, 0.213546247918337), (-0.491530941718489, 0.0016329931618575), .UNSPECIFIED.);
#25460 = ADVANCED_FACE ('', (#25400), #25450, .T.);
#25470 = ORIENTED_EDGE ('', *, *, #25210, .T.);
#25480 = ORIENTED_EDGE ('', *, *, #25050, .T.);
#25490 = CARTESIAN_POINT ('', (43.2, 29.7, 8.99999999999999));
#25500 = CARTESIAN_POINT ('', (43.2, 30., 8.7));
#25510 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#25490, #25500), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#25520 = EDGE_CURVE ('', #410, #21120, #25510, .T.);
#25530 = ORIENTED_EDGE ('', *, *, #25520, .F.);
#25540 = EDGE_LOOP ('', (#25470, #25480, #25530));
#25550 = FACE_OUTER_BOUND ('', #25540, .T.);
#25560 = CARTESIAN_POINT ('', (43.5516666666667, 29.7496666666667, 8.59866666666666));
#25570 = CARTESIAN_POINT ('', (43.3503333333333, 29.5483333333333, 9.00133333333333));
#25580 = CARTESIAN_POINT ('', (43.2496666666667, 30.0516666666667, 8.59866666666666));
#25590 = CARTESIAN_POINT ('', (43.0483333333333, 29.8503333333333, 9.00133333333333));
#25600 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#25560, #25570), (#25580, #25590)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.425678282274301, 0.00141421356237004), (-0.12410748030101, 0.369056454579333), .UNSPECIFIED.);
#25610 = ADVANCED_FACE ('', (#25550), #25600, .T.);
#25620 = ORIENTED_EDGE ('', *, *, #25370, .T.);
#25630 = ORIENTED_EDGE ('', *, *, #520, .F.);
#25640 = ORIENTED_EDGE ('', *, *, #25520, .T.);
#25650 = ORIENTED_EDGE ('', *, *, #21160, .F.);
#25660 = EDGE_LOOP ('', (#25620, #25630, #25640, #25650));
#25670 = FACE_OUTER_BOUND ('', #25660, .T.);
#25680 = CARTESIAN_POINT ('', (43.201, 29.699, 9.001));
#25690 = CARTESIAN_POINT ('', (22.799, 29.699, 9.001));
#25700 = CARTESIAN_POINT ('', (43.201, 30.001, 8.69899999999999));
#25710 = CARTESIAN_POINT ('', (22.799, 30.001, 8.69899999999999));
#25720 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#25680, #25690), (#25700, #25710)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.425678282274303, 0.00141421356237537), (-20.701, -0.298999999999999), .UNSPECIFIED.);
#25730 = ADVANCED_FACE ('', (#25670), #25720, .T.);
#25740 = CARTESIAN_POINT ('', (37.7, 28.8252190238521, 25.3305131811091));
#25750 = VERTEX_POINT ('', #25740);
#25760 = CARTESIAN_POINT ('', (36.5, 28.8252190238521, 25.330513181109));
#25770 = CARTESIAN_POINT ('', (37.7, 28.8252190238521, 25.330513181109));
#25780 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#25760, #25770), .UNSPECIFIED., .F., .U., (2, 2), (0.0834444148227145, 0.216742202079446), .UNSPECIFIED.);
#25790 = EDGE_CURVE ('', #13500, #25750, #25780, .T.);
#25800 = ORIENTED_EDGE ('', *, *, #25790, .T.);
#25810 = CARTESIAN_POINT ('', (37.7, 23.8305131811091, 22.6747809761478));
#25820 = VERTEX_POINT ('', #25810);
#25830 = CARTESIAN_POINT ('', (37.7, 28.8252190238521, 25.3305131811091));
#25840 = CARTESIAN_POINT ('', (37.7, 27.6557322049612, 21.505294157257));
#25850 = CARTESIAN_POINT ('', (37.7, 23.8305131811091, 22.6747809761478));
#25860 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#25830, #25840, #25850), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (89.9999999999996, 179.999999999999), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186553, 1.))
   REPRESENTATION_ITEM ('')
);
#25870 = EDGE_CURVE ('', #25750, #25820, #25860, .T.);
#25880 = ORIENTED_EDGE ('', *, *, #25870, .T.);
#25890 = CARTESIAN_POINT ('', (44., 23.830513181109, 22.6747809761478));
#25900 = VERTEX_POINT ('', #25890);
#25910 = CARTESIAN_POINT ('', (37.7, 23.8305131811091, 22.6747809761478));
#25920 = CARTESIAN_POINT ('', (44., 23.830513181109, 22.6747809761478));
#25930 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#25910, #25920), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#25940 = EDGE_CURVE ('', #25820, #25900, #25930, .T.);
#25950 = ORIENTED_EDGE ('', *, *, #25940, .T.);
#25960 = CARTESIAN_POINT ('', (43.9999999999999, 26.1694868188909, 30.3252190238521));
#25970 = VERTEX_POINT ('', #25960);
#25980 = CARTESIAN_POINT ('', (44., 26.1694868188909, 30.3252190238521));
#25990 = CARTESIAN_POINT ('', (44., 22.3442677950388, 31.4947058427431));
#26000 = CARTESIAN_POINT ('', (44., 21.1747809761479, 27.6694868188909));
#26010 = CARTESIAN_POINT ('', (44., 20.0052941572569, 23.8442677950388));
#26020 = CARTESIAN_POINT ('', (44., 23.830513181109, 22.6747809761479));
#26030 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#25980, #25990, #26000, #26010, #26020), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (90.0000000000009, 180., 270.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.70710678118655, 1., 0.70710678118655, 1.))
   REPRESENTATION_ITEM ('')
);
#26040 = EDGE_CURVE ('', #25970, #25900, #26030, .T.);
#26050 = ORIENTED_EDGE ('', *, *, #26040, .F.);
#26060 = CARTESIAN_POINT ('', (37.7, 26.169486818891, 30.3252190238521));
#26070 = VERTEX_POINT ('', #26060);
#26080 = CARTESIAN_POINT ('', (37.7, 26.169486818891, 30.3252190238521));
#26090 = CARTESIAN_POINT ('', (43.9999999999999, 26.1694868188909, 30.3252190238521));
#26100 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#26080, #26090), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#26110 = EDGE_CURVE ('', #26070, #25970, #26100, .T.);
#26120 = ORIENTED_EDGE ('', *, *, #26110, .F.);
#26130 = CARTESIAN_POINT ('', (37.7, 26.169486818891, 30.3252190238521));
#26140 = CARTESIAN_POINT ('', (37.7, 29.9947058427431, 29.1557322049611));
#26150 = CARTESIAN_POINT ('', (37.7, 28.8252190238521, 25.3305131811091));
#26160 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#26130, #26140, #26150), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (5.08888749034166E-13, 89.9999999999996), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186553, 1.))
   REPRESENTATION_ITEM ('')
);
#26170 = EDGE_CURVE ('', #26070, #25750, #26160, .T.);
#26180 = ORIENTED_EDGE ('', *, *, #26170, .T.);
#26190 = ORIENTED_EDGE ('', *, *, #25790, .F.);
#26200 = ORIENTED_EDGE ('', *, *, #13590, .F.);
#26210 = ORIENTED_EDGE ('', *, *, #13670, .F.);
#26220 = EDGE_LOOP ('', (#25800, #25880, #25950, #26050, #26120, #26180, #26190, #26200, #26210));
#26230 = FACE_OUTER_BOUND ('', #26220, .T.);
#26240 = CARTESIAN_POINT ('', (44.7512, 28.8252190238521, 25.330513181109));
#26250 = CARTESIAN_POINT ('', (35.7488, 28.8252190238521, 25.330513181109));
#26260 = CARTESIAN_POINT ('', (44.7512, 27.6557322049612, 21.5052941572569));
#26270 = CARTESIAN_POINT ('', (35.7488, 27.6557322049612, 21.5052941572569));
#26280 = CARTESIAN_POINT ('', (44.7512, 23.830513181109, 22.6747809761479));
#26290 = CARTESIAN_POINT ('', (35.7488, 23.830513181109, 22.6747809761479));
#26300 = CARTESIAN_POINT ('', (44.7512, 20.0052941572569, 23.8442677950388));
#26310 = CARTESIAN_POINT ('', (35.7488, 20.0052941572569, 23.8442677950388));
#26320 = CARTESIAN_POINT ('', (44.7512, 21.1747809761479, 27.669486818891));
#26330 = CARTESIAN_POINT ('', (35.7488, 21.1747809761479, 27.669486818891));
#26340 = CARTESIAN_POINT ('', (44.7512, 22.3442677950388, 31.4947058427431));
#26350 = CARTESIAN_POINT ('', (35.7488, 22.3442677950388, 31.4947058427431));
#26360 = CARTESIAN_POINT ('', (44.7512, 26.169486818891, 30.3252190238521));
#26370 = CARTESIAN_POINT ('', (35.7488, 26.169486818891, 30.3252190238521));
#26380 = CARTESIAN_POINT ('', (44.7512, 29.9947058427431, 29.1557322049612));
#26390 = CARTESIAN_POINT ('', (35.7488, 29.9947058427431, 29.1557322049612));
#26400 = CARTESIAN_POINT ('', (44.7512, 28.8252190238521, 25.330513181109));
#26410 = CARTESIAN_POINT ('', (35.7488, 28.8252190238521, 25.330513181109));
#26420 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#26240, #26250), (#26260, #26270), (#26280, #26290), (#26300, #26310), (#26320, #26330), (#26340, #26350), (#26360, #26370), (#26380, #26390), (#26400, #26410)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#26430 = ADVANCED_FACE ('', (#26230), #26420, .T.);
#26440 = CARTESIAN_POINT ('', (38., 33.8794622473887, 27.9680429820679));
#26450 = VERTEX_POINT ('', #26440);
#26460 = CARTESIAN_POINT ('', (44., 33.8794622473887, 27.9680429820679));
#26470 = VERTEX_POINT ('', #26460);
#26480 = CARTESIAN_POINT ('', (38., 33.8794622473887, 27.9680429820679));
#26490 = CARTESIAN_POINT ('', (44., 33.8794622473887, 27.9680429820679));
#26500 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#26480, #26490), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#26510 = EDGE_CURVE ('', #26450, #26470, #26500, .T.);
#26520 = ORIENTED_EDGE ('', *, *, #26510, .T.);
#26530 = CARTESIAN_POINT ('', (44., 31.5404886096067, 20.3176049343636));
#26540 = VERTEX_POINT ('', #26530);
#26550 = CARTESIAN_POINT ('', (44., 31.5404886096067, 20.3176049343636));
#26560 = CARTESIAN_POINT ('', (44., 34.6078155339741, 23.5625960094689));
#26570 = CARTESIAN_POINT ('', (44., 33.8794622473887, 27.9680429820679));
#26580 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#26550, #26560, #26570), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (333.612200038757, 386.387799961243), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.895806416477616, 1.))
   REPRESENTATION_ITEM ('')
);
#26590 = EDGE_CURVE ('', #26540, #26470, #26580, .T.);
#26600 = ORIENTED_EDGE ('', *, *, #26590, .F.);
#26610 = CARTESIAN_POINT ('', (38., 31.5404886096067, 20.3176049343636));
#26620 = VERTEX_POINT ('', #26610);
#26630 = CARTESIAN_POINT ('', (38., 31.5404886096067, 20.3176049343636));
#26640 = CARTESIAN_POINT ('', (44., 31.5404886096067, 20.3176049343636));
#26650 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#26630, #26640), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#26660 = EDGE_CURVE ('', #26620, #26540, #26650, .T.);
#26670 = ORIENTED_EDGE ('', *, *, #26660, .F.);
#26680 = CARTESIAN_POINT ('', (38., 33.8794622473887, 27.9680429820679));
#26690 = CARTESIAN_POINT ('', (38., 34.6078155339741, 23.5625960094689));
#26700 = CARTESIAN_POINT ('', (38., 31.5404886096067, 20.3176049343636));
#26710 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#26680, #26690, #26700), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (153.612200038757, 206.387799961244), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.895806416477616, 1.))
   REPRESENTATION_ITEM ('')
);
#26720 = EDGE_CURVE ('', #26450, #26620, #26710, .T.);
#26730 = ORIENTED_EDGE ('', *, *, #26720, .F.);
#26740 = EDGE_LOOP ('', (#26520, #26600, #26670, #26730));
#26750 = FACE_OUTER_BOUND ('', #26740, .T.);
#26760 = CARTESIAN_POINT ('', (37.3988, 16.3932571963327, 29.1313453425047));
#26770 = CARTESIAN_POINT ('', (44.6012, 16.3932571963327, 29.1313453425047));
#26780 = CARTESIAN_POINT ('', (37.3988, 13.761911853828, 20.5246025388374));
#26790 = CARTESIAN_POINT ('', (44.6012, 13.761911853828, 20.5246025388374));
#26800 = CARTESIAN_POINT ('', (37.3988, 22.3686546574953, 17.8932571963327));
#26810 = CARTESIAN_POINT ('', (44.6012, 22.3686546574953, 17.8932571963327));
#26820 = CARTESIAN_POINT ('', (37.3988, 30.9753974611626, 15.261911853828));
#26830 = CARTESIAN_POINT ('', (44.6012, 30.9753974611626, 15.261911853828));
#26840 = CARTESIAN_POINT ('', (37.3988, 33.6067428036673, 23.8686546574953));
#26850 = CARTESIAN_POINT ('', (44.6012, 33.6067428036673, 23.8686546574953));
#26860 = CARTESIAN_POINT ('', (37.3988, 36.238088146172, 32.4753974611626));
#26870 = CARTESIAN_POINT ('', (44.6012, 36.238088146172, 32.4753974611626));
#26880 = CARTESIAN_POINT ('', (37.3988, 27.6313453425047, 35.1067428036673));
#26890 = CARTESIAN_POINT ('', (44.6012, 27.6313453425047, 35.1067428036673));
#26900 = CARTESIAN_POINT ('', (37.3988, 19.0246025388374, 37.738088146172));
#26910 = CARTESIAN_POINT ('', (44.6012, 19.0246025388374, 37.738088146172));
#26920 = CARTESIAN_POINT ('', (37.3988, 16.3932571963327, 29.1313453425047));
#26930 = CARTESIAN_POINT ('', (44.6012, 16.3932571963327, 29.1313453425047));
#26940 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#26760, #26770), (#26780, #26790), (#26800, #26810), (#26820, #26830), (#26840, #26850), (#26860, #26870), (#26880, #26890), (#26900, #26910), (#26920, #26930)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#26950 = ADVANCED_FACE ('', (#26750), #26940, .T.);
#26960 = CARTESIAN_POINT ('', (43.9999999999999, 26.1694868188909, 30.3252190238521));
#26970 = CARTESIAN_POINT ('', (44., 33.8794622473887, 27.9680429820679));
#26980 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#26960, #26970), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#26990 = EDGE_CURVE ('', #25970, #26470, #26980, .T.);
#27000 = ORIENTED_EDGE ('', *, *, #26990, .F.);
#27010 = ORIENTED_EDGE ('', *, *, #26040, .T.);
#27020 = CARTESIAN_POINT ('', (44., 23.830513181109, 22.6747809761478));
#27030 = CARTESIAN_POINT ('', (44., 31.5404886096067, 20.3176049343636));
#27040 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#27020, #27030), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#27050 = EDGE_CURVE ('', #25900, #26540, #27040, .T.);
#27060 = ORIENTED_EDGE ('', *, *, #27050, .T.);
#27070 = ORIENTED_EDGE ('', *, *, #26590, .T.);
#27080 = EDGE_LOOP ('', (#27000, #27010, #27060, #27070));
#27090 = FACE_OUTER_BOUND ('', #27080, .T.);
#27100 = CARTESIAN_POINT ('', (44., 37.7344524815487, 30.5401027287687));
#27110 = CARTESIAN_POINT ('', (44., 33.3604033208563, 16.23323257814));
#27120 = CARTESIAN_POINT ('', (44., 21.2527063703746, 35.5790781989667));
#27130 = CARTESIAN_POINT ('', (44., 16.8786572096823, 21.272208048338));
#27140 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#27100, #27110), (#27120, #27130)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-10.9968057506252, 6.23802029034368), (-7.58676303484189, 7.37381314280261), .UNSPECIFIED.);
#27150 = ADVANCED_FACE ('', (#27090), #27140, .T.);
#27160 = CARTESIAN_POINT ('', (38., 25.3395366328256, 22.2134262079174));
#27170 = VERTEX_POINT ('', #27160);
#27180 = CARTESIAN_POINT ('', (38., 25.3395366328256, 22.2134262079174));
#27190 = CARTESIAN_POINT ('', (38., 31.5404886096067, 20.3176049343636));
#27200 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#27180, #27190), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#27210 = EDGE_CURVE ('', #27170, #26620, #27200, .T.);
#27220 = ORIENTED_EDGE ('', *, *, #27210, .F.);
#27230 = CARTESIAN_POINT ('', (38., 27.6785102706077, 29.8638642556217));
#27240 = VERTEX_POINT ('', #27230);
#27250 = CARTESIAN_POINT ('', (38., 25.3395366328256, 22.2134262079174));
#27260 = CARTESIAN_POINT ('', (38., 28.2565786214078, 22.4444831458484));
#27270 = CARTESIAN_POINT ('', (38., 29.112110450641, 25.2428016696922));
#27280 = CARTESIAN_POINT ('', (38., 29.9676422798742, 28.0411201935358));
#27290 = CARTESIAN_POINT ('', (38., 27.6785102706077, 29.8638642556217));
#27300 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#27250, #27260, #27270, #27280, #27290), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (201.52890440557, 269.999999999999, 338.471095594428), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.826731683913669, 1., 0.826731683913669, 1.))
   REPRESENTATION_ITEM ('')
);
#27310 = EDGE_CURVE ('', #27170, #27240, #27300, .T.);
#27320 = ORIENTED_EDGE ('', *, *, #27310, .T.);
#27330 = CARTESIAN_POINT ('', (38., 27.6785102706077, 29.8638642556217));
#27340 = CARTESIAN_POINT ('', (38., 33.8794622473887, 27.9680429820679));
#27350 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#27330, #27340), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#27360 = EDGE_CURVE ('', #27240, #26450, #27350, .T.);
#27370 = ORIENTED_EDGE ('', *, *, #27360, .T.);
#27380 = ORIENTED_EDGE ('', *, *, #26720, .T.);
#27390 = EDGE_LOOP ('', (#27220, #27320, #27370, #27380));
#27400 = FACE_OUTER_BOUND ('', #27390, .T.);
#27410 = CARTESIAN_POINT ('', (38., 26.1309713248417, 32.4568013429802));
#27420 = CARTESIAN_POINT ('', (38., 22.6688772063526, 21.1328017300817));
#27430 = CARTESIAN_POINT ('', (38., 37.2784749604471, 29.0486674599035));
#27440 = CARTESIAN_POINT ('', (38., 33.816380841958, 17.7246678470051));
#27450 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#27410, #27420), (#27430, #27440)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.660046906537916, 10.9968057506252), (-6.02718146885543, 5.81423157681612), .UNSPECIFIED.);
#27460 = ADVANCED_FACE ('', (#27400), #27450, .T.);
#27470 = ORIENTED_EDGE ('', *, *, #26110, .T.);
#27480 = ORIENTED_EDGE ('', *, *, #26990, .T.);
#27490 = ORIENTED_EDGE ('', *, *, #26510, .F.);
#27500 = ORIENTED_EDGE ('', *, *, #27360, .F.);
#27510 = CARTESIAN_POINT ('', (38., 27.6785102706077, 29.8638642556217));
#27520 = CARTESIAN_POINT ('', (38., 27.4862422976533, 29.9226464740157));
#27530 = CARTESIAN_POINT ('', (37.9742589975513, 27.2939036447068, 29.9814503014519));
#27540 = CARTESIAN_POINT ('', (37.9383485311608, 27.1047274170299, 30.0392872784553));
#27550 = CARTESIAN_POINT ('', (37.8791711187418, 26.792980988471, 30.1345977265009));
#27560 = CARTESIAN_POINT ('', (37.7908497718387, 26.4867436690991, 30.2282238708406));
#27570 = CARTESIAN_POINT ('', (37.703341026853, 26.1811536406918, 30.3216521184725));
#27580 = CARTESIAN_POINT ('', (37.7022273873148, 26.1772646906428, 30.3228410898211));
#27590 = CARTESIAN_POINT ('', (37.7011136756177, 26.1733757594913, 30.3240300553923));
#27600 = CARTESIAN_POINT ('', (37.7, 26.169486818891, 30.3252190238521));
#27610 = B_SPLINE_CURVE_WITH_KNOTS ('', 3, (#27510, #27520, #27530, #27540, #27550, #27560, #27570, #27580, #27590, #27600), .UNSPECIFIED., .F., .U., (4, 3, 3, 4), (0., 0.374973301709973, 0.99213627244311, 1.), .UNSPECIFIED.);
#27620 = EDGE_CURVE ('', #27240, #26070, #27610, .T.);
#27630 = ORIENTED_EDGE ('', *, *, #27620, .T.);
#27640 = EDGE_LOOP ('', (#27470, #27480, #27490, #27500, #27630));
#27650 = FACE_OUTER_BOUND ('', #27640, .T.);
#27660 = CARTESIAN_POINT ('', (44.001, 33.8806563626267, 27.9676779044025));
#27670 = CARTESIAN_POINT ('', (44.001, 26.1682927036529, 30.3255841015176));
#27680 = CARTESIAN_POINT ('', (37.699, 33.8806563626267, 27.9676779044025));
#27690 = CARTESIAN_POINT ('', (37.699, 26.1682927036529, 30.3255841015176));
#27700 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#27660, #27670), (#27680, #27690)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (24.5006257424665, 30.8026257424665), (-8.06350642475923, 0.00124867646078286), .UNSPECIFIED.);
#27710 = ADVANCED_FACE ('', (#27650), #27700, .T.);
#27720 = ORIENTED_EDGE ('', *, *, #25940, .F.);
#27730 = CARTESIAN_POINT ('', (37.7, 23.830513181109, 22.6747809761479));
#27740 = CARTESIAN_POINT ('', (37.8422666039366, 24.3273066599299, 22.5228959673237));
#27750 = CARTESIAN_POINT ('', (38., 24.825429523962, 22.370604524653));
#27760 = CARTESIAN_POINT ('', (38., 25.3395366328256, 22.2134262079174));
#27770 = B_SPLINE_CURVE_WITH_KNOTS ('', 3, (#27730, #27740, #27750, #27760), .UNSPECIFIED., .F., .U., (4, 4), (0., 1.), .UNSPECIFIED.);
#27780 = EDGE_CURVE ('', #25820, #27170, #27770, .T.);
#27790 = ORIENTED_EDGE ('', *, *, #27780, .T.);
#27800 = ORIENTED_EDGE ('', *, *, #27210, .T.);
#27810 = ORIENTED_EDGE ('', *, *, #26660, .T.);
#27820 = ORIENTED_EDGE ('', *, *, #27050, .F.);
#27830 = EDGE_LOOP ('', (#27720, #27790, #27800, #27810, #27820));
#27840 = FACE_OUTER_BOUND ('', #27830, .T.);
#27850 = CARTESIAN_POINT ('', (37.699, 31.5416827248447, 20.3172398566982));
#27860 = CARTESIAN_POINT ('', (37.699, 23.829319065871, 22.6751460538133));
#27870 = CARTESIAN_POINT ('', (44.001, 31.5416827248447, 20.3172398566982));
#27880 = CARTESIAN_POINT ('', (44.001, 23.829319065871, 22.6751460538133));
#27890 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#27850, #27860), (#27870, #27880)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (24.5006257424665, 30.8026257424665), (-8.06350642475912, 0.00124867646078286), .UNSPECIFIED.);
#27900 = ADVANCED_FACE ('', (#27840), #27890, .T.);
#27910 = ORIENTED_EDGE ('', *, *, #27620, .F.);
#27920 = ORIENTED_EDGE ('', *, *, #27310, .F.);
#27930 = ORIENTED_EDGE ('', *, *, #27780, .F.);
#27940 = ORIENTED_EDGE ('', *, *, #25870, .F.);
#27950 = ORIENTED_EDGE ('', *, *, #26170, .F.);
#27960 = EDGE_LOOP ('', (#27910, #27920, #27930, #27940, #27950));
#27970 = FACE_OUTER_BOUND ('', #27960, .T.);
#27980 = CARTESIAN_POINT ('', (37.7, 23.6550901582754, 22.10099812257));
#27990 = CARTESIAN_POINT ('', (37.4, 23.6550901582754, 22.10099812257));
#28000 = CARTESIAN_POINT ('', (37.4, 23.7428016696922, 22.387889549359));
#28010 = CARTESIAN_POINT ('', (37.4, 23.830513181109, 22.6747809761479));
#28020 = CARTESIAN_POINT ('', (37.7, 23.830513181109, 22.6747809761479));
#28030 = CARTESIAN_POINT ('', (38., 23.830513181109, 22.6747809761479));
#28040 = CARTESIAN_POINT ('', (38., 23.7428016696922, 22.387889549359));
#28050 = CARTESIAN_POINT ('', (38., 23.6550901582754, 22.10099812257));
#28060 = CARTESIAN_POINT ('', (37.7, 23.6550901582754, 22.10099812257));
#28070 = CARTESIAN_POINT ('', (37.7, 28.0540920357053, 20.7560882808454));
#28080 = CARTESIAN_POINT ('', (37.4, 28.0540920357053, 20.7560882808454));
#28090 = CARTESIAN_POINT ('', (37.4, 27.8549121203333, 21.1306912190512));
#28100 = CARTESIAN_POINT ('', (37.4, 27.6557322049612, 21.5052941572569));
#28110 = CARTESIAN_POINT ('', (37.7, 27.6557322049612, 21.5052941572569));
#28120 = CARTESIAN_POINT ('', (38., 27.6557322049612, 21.5052941572569));
#28130 = CARTESIAN_POINT ('', (38., 27.8549121203333, 21.1306912190512));
#28140 = CARTESIAN_POINT ('', (38., 28.0540920357053, 20.7560882808454));
#28150 = CARTESIAN_POINT ('', (37.7, 28.0540920357053, 20.7560882808454));
#28160 = CARTESIAN_POINT ('', (37.7, 29.39900187743, 25.1550901582754));
#28170 = CARTESIAN_POINT ('', (37.4, 29.39900187743, 25.1550901582754));
#28180 = CARTESIAN_POINT ('', (37.4, 29.112110450641, 25.2428016696922));
#28190 = CARTESIAN_POINT ('', (37.4, 28.8252190238521, 25.330513181109));
#28200 = CARTESIAN_POINT ('', (37.7, 28.8252190238521, 25.330513181109));
#28210 = CARTESIAN_POINT ('', (38., 28.8252190238521, 25.330513181109));
#28220 = CARTESIAN_POINT ('', (38., 29.112110450641, 25.2428016696922));
#28230 = CARTESIAN_POINT ('', (38., 29.39900187743, 25.1550901582754));
#28240 = CARTESIAN_POINT ('', (37.7, 29.39900187743, 25.1550901582754));
#28250 = CARTESIAN_POINT ('', (37.7, 30.7439117191546, 29.5540920357053));
#28260 = CARTESIAN_POINT ('', (37.4, 30.7439117191546, 29.5540920357053));
#28270 = CARTESIAN_POINT ('', (37.4, 30.3693087809488, 29.3549121203333));
#28280 = CARTESIAN_POINT ('', (37.4, 29.9947058427431, 29.1557322049612));
#28290 = CARTESIAN_POINT ('', (37.7, 29.9947058427431, 29.1557322049612));
#28300 = CARTESIAN_POINT ('', (38., 29.9947058427431, 29.1557322049612));
#28310 = CARTESIAN_POINT ('', (38., 30.3693087809488, 29.3549121203333));
#28320 = CARTESIAN_POINT ('', (38., 30.7439117191546, 29.5540920357053));
#28330 = CARTESIAN_POINT ('', (37.7, 30.7439117191546, 29.5540920357053));
#28340 = CARTESIAN_POINT ('', (37.7, 26.3449098417246, 30.89900187743));
#28350 = CARTESIAN_POINT ('', (37.4, 26.3449098417246, 30.89900187743));
#28360 = CARTESIAN_POINT ('', (37.4, 26.2571983303078, 30.6121104506411));
#28370 = CARTESIAN_POINT ('', (37.4, 26.169486818891, 30.3252190238521));
#28380 = CARTESIAN_POINT ('', (37.7, 26.169486818891, 30.3252190238521));
#28390 = CARTESIAN_POINT ('', (38., 26.169486818891, 30.3252190238521));
#28400 = CARTESIAN_POINT ('', (38., 26.2571983303078, 30.6121104506411));
#28410 = CARTESIAN_POINT ('', (38., 26.3449098417246, 30.89900187743));
#28420 = CARTESIAN_POINT ('', (37.7, 26.3449098417246, 30.89900187743));
#28430 = CARTESIAN_POINT ('', (37.7, 21.9459079642947, 32.2439117191546));
#28440 = CARTESIAN_POINT ('', (37.4, 21.9459079642947, 32.2439117191546));
#28450 = CARTESIAN_POINT ('', (37.4, 22.1450878796667, 31.8693087809488));
#28460 = CARTESIAN_POINT ('', (37.4, 22.3442677950388, 31.4947058427431));
#28470 = CARTESIAN_POINT ('', (37.7, 22.3442677950388, 31.4947058427431));
#28480 = CARTESIAN_POINT ('', (38., 22.3442677950388, 31.4947058427431));
#28490 = CARTESIAN_POINT ('', (38., 22.1450878796667, 31.8693087809488));
#28500 = CARTESIAN_POINT ('', (38., 21.9459079642947, 32.2439117191546));
#28510 = CARTESIAN_POINT ('', (37.7, 21.9459079642947, 32.2439117191546));
#28520 = CARTESIAN_POINT ('', (37.7, 20.60099812257, 27.8449098417246));
#28530 = CARTESIAN_POINT ('', (37.4, 20.60099812257, 27.8449098417246));
#28540 = CARTESIAN_POINT ('', (37.4, 20.887889549359, 27.7571983303078));
#28550 = CARTESIAN_POINT ('', (37.4, 21.1747809761479, 27.669486818891));
#28560 = CARTESIAN_POINT ('', (37.7, 21.1747809761479, 27.669486818891));
#28570 = CARTESIAN_POINT ('', (38., 21.1747809761479, 27.669486818891));
#28580 = CARTESIAN_POINT ('', (38., 20.887889549359, 27.7571983303078));
#28590 = CARTESIAN_POINT ('', (38., 20.60099812257, 27.8449098417246));
#28600 = CARTESIAN_POINT ('', (37.7, 20.60099812257, 27.8449098417246));
#28610 = CARTESIAN_POINT ('', (37.7, 19.2560882808454, 23.4459079642947));
#28620 = CARTESIAN_POINT ('', (37.4, 19.2560882808454, 23.4459079642947));
#28630 = CARTESIAN_POINT ('', (37.4, 19.6306912190512, 23.6450878796668));
#28640 = CARTESIAN_POINT ('', (37.4, 20.0052941572569, 23.8442677950388));
#28650 = CARTESIAN_POINT ('', (37.7, 20.0052941572569, 23.8442677950388));
#28660 = CARTESIAN_POINT ('', (38., 20.0052941572569, 23.8442677950388));
#28670 = CARTESIAN_POINT ('', (38., 19.6306912190512, 23.6450878796668));
#28680 = CARTESIAN_POINT ('', (38., 19.2560882808454, 23.4459079642947));
#28690 = CARTESIAN_POINT ('', (37.7, 19.2560882808454, 23.4459079642947));
#28700 = CARTESIAN_POINT ('', (37.7, 23.6550901582754, 22.10099812257));
#28710 = CARTESIAN_POINT ('', (37.4, 23.6550901582754, 22.10099812257));
#28720 = CARTESIAN_POINT ('', (37.4, 23.7428016696922, 22.387889549359));
#28730 = CARTESIAN_POINT ('', (37.4, 23.830513181109, 22.6747809761479));
#28740 = CARTESIAN_POINT ('', (37.7, 23.830513181109, 22.6747809761479));
#28750 = CARTESIAN_POINT ('', (38., 23.830513181109, 22.6747809761479));
#28760 = CARTESIAN_POINT ('', (38., 23.7428016696922, 22.387889549359));
#28770 = CARTESIAN_POINT ('', (38., 23.6550901582754, 22.10099812257));
#28780 = CARTESIAN_POINT ('', (37.7, 23.6550901582754, 22.10099812257));
#28790 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 2, ((#27980, #27990, #28000, #28010, #28020, #28030, #28040, #28050, #28060), (#28070, #28080, #28090, #28100, #28110, #28120, #28130, #28140, #28150), (#28160, #28170, #28180, #28190, #28200, #28210, #28220, #28230, #28240), (#28250, #28260, #28270, #28280, #28290, #28300, #28310, #28320, #28330), (#28340, #28350, #28360, #28370, #28380, #28390, #28400, #28410, #28420), (#28430, #28440, #28450, #28460, #28470, #28480, #28490, #28500, #28510), (#28520, #28530, #28540, #28550, #28560, #28570, #28580, #28590, #28600), (#28610, #28620, #28630, #28640, #28650, #28660, #28670, #28680, #28690), (#28700, #28710, #28720, #28730, #28740, #28750, #28760, #28770, #28780)), .UNSPECIFIED., .T., .T., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (3, 2, 2, 2, 3), (0., 0.25, 0.5, 0.75, 1.), (0., 0.25, 0.5, 0.75, 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.), (0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548), (1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.), (0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548), (1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.), (0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548), (1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.), (0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548), (1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.)))
   REPRESENTATION_ITEM ('')
);
#28800 = ADVANCED_FACE ('', (#27970), #28790, .T.);
#28810 = ORIENTED_EDGE ('', *, *, #2420, .F.);
#28820 = ORIENTED_EDGE ('', *, *, #8350, .F.);
#28830 = ORIENTED_EDGE ('', *, *, #16420, .F.);
#28840 = ORIENTED_EDGE ('', *, *, #16140, .F.);
#28850 = EDGE_LOOP ('', (#28810, #28820, #28830, #28840));
#28860 = FACE_OUTER_BOUND ('', #28850, .T.);
#28870 = CARTESIAN_POINT ('', (-63.001, -19.0619099508076, -3.50161605103373E-15));
#28880 = CARTESIAN_POINT ('', (-59.499000274339, -20.0002679491924, -2.21055528157428E-15));
#28890 = CARTESIAN_POINT ('', (-63.001, -19.0619099508076, -19.0619099508076));
#28900 = CARTESIAN_POINT ('', (-59.499000274339, -20.0002679491924, -20.0002679491924));
#28910 = CARTESIAN_POINT ('', (-63.001, 5.22099056471457E-15, -19.0619099508076));
#28920 = CARTESIAN_POINT ('', (-59.499000274339, 5.20473956884648E-15, -20.0002679491924));
#28930 = CARTESIAN_POINT ('', (-63.001, 19.0619099508076, -19.0619099508076));
#28940 = CARTESIAN_POINT ('', (-59.499000274339, 20.0002679491924, -20.0002679491924));
#28950 = CARTESIAN_POINT ('', (-63.001, 19.0619099508076, -4.16186516785617E-15));
#28960 = CARTESIAN_POINT ('', (-59.499000274339, 20.0002679491924, -2.90330639013289E-15));
#28970 = CARTESIAN_POINT ('', (-63.001, 19.0619099508076, 19.0619099508076));
#28980 = CARTESIAN_POINT ('', (-59.499000274339, 20.0002679491924, 20.0002679491924));
#28990 = CARTESIAN_POINT ('', (-63.001, 8.21565038222616E-15, 19.0619099508076));
#29000 = CARTESIAN_POINT ('', (-59.499000274339, 8.34681709001188E-15, 20.0002679491924));
#29010 = CARTESIAN_POINT ('', (-63.001, -19.0619099508076, 19.0619099508076));
#29020 = CARTESIAN_POINT ('', (-59.499000274339, -20.0002679491924, 20.0002679491924));
#29030 = CARTESIAN_POINT ('', (-63.001, -19.0619099508076, -3.50161605103373E-15));
#29040 = CARTESIAN_POINT ('', (-59.499000274339, -20.0002679491924, -2.21055528157428E-15));
#29050 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#28870, #28880), (#28890, #28900), (#28910, #28920), (#28930, #28940), (#28950, #28960), (#28970, #28980), (#28990, #29000), (#29010, #29020), (#29030, #29040)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#29060 = ADVANCED_FACE ('', (#28860), #29050, .T.);
#29070 = CLOSED_SHELL ('', (#660, #1180, #1780, #2340, #3000, #8770, #9200, #9550, #9830, #10140, #10980, #11550, #12000, #12260, #12740, #12940, #13100, #13320, #13760, #14010, #14210, #14410, #14610, #14810, #15010, #15210, #15410, #15610, #15810, #16010, #16230, #16330, #16570, #16730, #16850, #17010, #17130, #17290, #17410, #17570, #17690, #17850, #17970, #18130, #18250, #18410, #18530, #18690, #18810, #18970, #19090, #19250, #19370, #19550, #19670, #19790, #19950, #20110, #20370, #20530, #20650, #21010, #21370, #21730, #22090, #22450, #22650, #22840, #23030, #23190, #23350, #23550, #23710, #23870, #24070, #24220, #24370, #24520, #24670, #24830, #24990, #25150, #25310, #25460, #25610, #25730, #26430, #26950, #27150, #27460, #27710, #27900, #28800, #29060));
#29080 = MANIFOLD_SOLID_BREP ('NOCUT', #29070);
#29090 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#29100 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#29110 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#29120 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #29090, 'DISTANCE_ACCURACY_VALUE', '');
#29130 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#29120))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#29090, #29100, #29110))
   REPRESENTATION_CONTEXT ('', '3D')
);
#29140 = COLOUR_RGB ('', 0.75294117647059, 0.75294117647059, 0.75294117647059);
#29150 = FILL_AREA_STYLE_COLOUR ('', #29140);
#29160 = FILL_AREA_STYLE ('', (#29150));
#29170 = SURFACE_STYLE_FILL_AREA (#29160);
#29180 = SURFACE_SIDE_STYLE ('', (#29170));
#29190 = SURFACE_STYLE_USAGE (.POSITIVE., #29180);
#29200 = PRESENTATION_STYLE_ASSIGNMENT ((#29190));
#29210 = STYLED_ITEM ('', (#29200), #29080);
#29220 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#29080), #29130);
#29230 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#29240 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #29230);
#29250 = MECHANICAL_CONTEXT ('', #29230, 'mechanical');
#29260 = PRODUCT ('NONE', '', '', (#29250));
#29270 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#29280 = PERSON ('', '', $, $, $, $);
#29290 = ORGANIZATION ($, '', '');
#29300 = PERSON_AND_ORGANIZATION (#29280, #29290);
#29310 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#29300, #29270, (#29260));
#29320 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#29260));
#29330 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #29260, .NOT_KNOWN.);
#29340 = APPROVAL_STATUS ('approved');
#29350 = APPROVAL (#29340, '');
#29360 = CALENDAR_DATE (2017, 17, 11);
#29370 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#29380 = LOCAL_TIME (13, 23, 20., #29370);
#29390 = DATE_AND_TIME (#29360, #29380);
#29400 = APPROVAL_DATE_TIME (#29390, #29350);
#29410 = APPROVAL_ROLE ('');
#29420 = PERSON ('', '', $, $, $, $);
#29430 = ORGANIZATION ($, '', '');
#29440 = PERSON_AND_ORGANIZATION (#29420, #29430);
#29450 = APPROVAL_PERSON_ORGANIZATION (#29440, #29350, #29410);
#29460 = CC_DESIGN_APPROVAL (#29350, (#29330));
#29470 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#29480 = PERSON ('', '', $, $, $, $);
#29490 = ORGANIZATION ($, '', '');
#29500 = PERSON_AND_ORGANIZATION (#29480, #29490);
#29510 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#29500, #29470, (#29330));
#29520 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#29530 = PERSON ('', '', $, $, $, $);
#29540 = ORGANIZATION ($, '', '');
#29550 = PERSON_AND_ORGANIZATION (#29530, #29540);
#29560 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#29550, #29520, (#29330));
#29570 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#29580 = SECURITY_CLASSIFICATION ('', '', #29570);
#29590 = APPROVAL_STATUS ('approved');
#29600 = APPROVAL (#29590, '');
#29610 = CALENDAR_DATE (2017, 17, 11);
#29620 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#29630 = LOCAL_TIME (13, 23, 20., #29620);
#29640 = DATE_AND_TIME (#29610, #29630);
#29650 = APPROVAL_DATE_TIME (#29640, #29600);
#29660 = APPROVAL_ROLE ('');
#29670 = PERSON ('', '', $, $, $, $);
#29680 = ORGANIZATION ($, '', '');
#29690 = PERSON_AND_ORGANIZATION (#29670, #29680);
#29700 = APPROVAL_PERSON_ORGANIZATION (#29690, #29600, #29660);
#29710 = CC_DESIGN_APPROVAL (#29600, (#29580));
#29720 = DATE_TIME_ROLE ('classification_date');
#29730 = CALENDAR_DATE (2017, 17, 11);
#29740 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#29750 = LOCAL_TIME (13, 23, 20., #29740);
#29760 = DATE_AND_TIME (#29730, #29750);
#29770 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#29760, #29720, (#29580));
#29780 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#29790 = PERSON ('', '', $, $, $, $);
#29800 = ORGANIZATION ($, '', '');
#29810 = PERSON_AND_ORGANIZATION (#29790, #29800);
#29820 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#29810, #29780, (#29580));
#29830 = CC_DESIGN_SECURITY_CLASSIFICATION (#29580, (#29330));
#29840 = DESIGN_CONTEXT ('', #29230, 'design');
#29850 = PRODUCT_DEFINITION ('', '', #29330, #29840);
#29860 = APPROVAL_STATUS ('approved');
#29870 = APPROVAL (#29860, '');
#29880 = CALENDAR_DATE (2017, 17, 11);
#29890 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#29900 = LOCAL_TIME (13, 23, 20., #29890);
#29910 = DATE_AND_TIME (#29880, #29900);
#29920 = APPROVAL_DATE_TIME (#29910, #29870);
#29930 = APPROVAL_ROLE ('');
#29940 = PERSON ('', '', $, $, $, $);
#29950 = ORGANIZATION ($, '', '');
#29960 = PERSON_AND_ORGANIZATION (#29940, #29950);
#29970 = APPROVAL_PERSON_ORGANIZATION (#29960, #29870, #29930);
#29980 = CC_DESIGN_APPROVAL (#29870, (#29850));
#29990 = DATE_TIME_ROLE ('creation_date');
#30000 = CALENDAR_DATE (2017, 17, 11);
#30010 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#30020 = LOCAL_TIME (13, 23, 20., #30010);
#30030 = DATE_AND_TIME (#30000, #30020);
#30040 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#30030, #29990, (#29850));
#30050 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#30060 = PERSON ('', '', $, $, $, $);
#30070 = ORGANIZATION ($, '', '');
#30080 = PERSON_AND_ORGANIZATION (#30060, #30070);
#30090 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#30080, #30050, (#29850));
#30100 = PRODUCT_DEFINITION_SHAPE ('', '', #29850);
#30110 = SHAPE_DEFINITION_REPRESENTATION (#30100, #29220);
ENDSEC;
END-ISO-10303-21;