ISO-10303-21;
HEADER;
FILE_DESCRIPTION ((), '1');
FILE_NAME ('C:\\TDMTemp\\Tools\\SMLIB\\inserts\\I02\\step\\LOMX 180404EN AM27C.stp', '2010-12-08T13:46:15', ('Unknown'), ('Unknown'), 'HarmonyWare STEP v1.4.4', 'HarmonyWare Translators', '');
FILE_SCHEMA (('CONFIG_CONTROL_DESIGN'));
ENDSEC;

DATA;
#10 = CARTESIAN_POINT ('', (-14.3079050769054, 0.14999999999995, -8.89629213294317));
#20 = VERTEX_POINT ('', #10);
#30 = CARTESIAN_POINT ('', (-15.2774940516086, 1.68999999999995, -7.56176739787348));
#40 = VERTEX_POINT ('', #30);
#50 = CARTESIAN_POINT ('', (-14.3079050769054, 0.149999999999949, -8.89629213294317));
#60 = CARTESIAN_POINT ('', (-15.2774940516086, 1.68999999999994, -7.56176739787348));
#70 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#50, #60), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.861307371286054), .UNSPECIFIED.);
#80 = EDGE_CURVE ('', #20, #40, #70, .T.);
#90 = ORIENTED_EDGE ('', *, *, #80, .F.);
#100 = CARTESIAN_POINT ('', (-14.3079050769054, -0.150000000000051, -8.89629213294317));
#110 = VERTEX_POINT ('', #100);
#120 = CARTESIAN_POINT ('', (-14.3079050769054, -0.150000000000051, -8.89629213294317));
#130 = CARTESIAN_POINT ('', (-14.3079050769054, 0.14999999999995, -8.89629213294317));
#140 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#120, #130), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#150 = EDGE_CURVE ('', #110, #20, #140, .T.);
#160 = ORIENTED_EDGE ('', *, *, #150, .F.);
#170 = CARTESIAN_POINT ('', (-15.2774940516086, -1.69000000000005, -7.56176739787347));
#180 = VERTEX_POINT ('', #170);
#190 = CARTESIAN_POINT ('', (-15.2774940516086, -1.69000000000005, -7.56176739787347));
#200 = CARTESIAN_POINT ('', (-14.3079050769054, -0.15000000000005, -8.89629213294317));
#210 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#190, #200), .UNSPECIFIED., .F., .U., (2, 2), (0.138692628711238, 1.), .UNSPECIFIED.);
#220 = EDGE_CURVE ('', #180, #110, #210, .T.);
#230 = ORIENTED_EDGE ('', *, *, #220, .F.);
#240 = CARTESIAN_POINT ('', (-15.3532693712234, -1.69000000000006, -7.45747161793778));
#250 = VERTEX_POINT ('', #240);
#260 = CARTESIAN_POINT ('', (-15.2774940516086, -1.69000000000005, -7.56176739787347));
#270 = CARTESIAN_POINT ('', (-15.3532693712234, -1.69000000000006, -7.45747161793778));
#280 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#260, #270), .UNSPECIFIED., .F., .U., (2, 2), (0.494001756805599, 0.512180549253324), .UNSPECIFIED.);
#290 = EDGE_CURVE ('', #180, #250, #280, .T.);
#300 = ORIENTED_EDGE ('', *, *, #290, .T.);
#310 = CARTESIAN_POINT ('', (-16.6998651206977, -1.93797958932567, -5.604041574178));
#320 = VERTEX_POINT ('', #310);
#330 = CARTESIAN_POINT ('', (-15.3532693712234, -1.69000000000006, -7.45747161793778));
#340 = CARTESIAN_POINT ('', (-16.6998651206977, -1.93797958932567, -5.60404157417799));
#350 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#330, #340), .UNSPECIFIED., .F., .U., (2, 2), (0.525906534952999, 0.847189080455548), .UNSPECIFIED.);
#360 = EDGE_CURVE ('', #250, #320, #350, .T.);
#370 = ORIENTED_EDGE ('', *, *, #360, .T.);
#380 = CARTESIAN_POINT ('', (-17.3755274873076, -1.69000000000006, -4.67407210843323));
#390 = VERTEX_POINT ('', #380);
#400 = CARTESIAN_POINT ('', (-17.3755274873077, -1.68999999999991, -4.67407210843311));
#410 = CARTESIAN_POINT ('', (-17.2935046104761, -1.83603226153865, -4.78696691316922));
#420 = CARTESIAN_POINT ('', (-16.6998651206977, -1.93797958932567, -5.60404157417799));
#430 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#400, #410, #420), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 0.500000000117209), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.881357264232055, 0.881357264259867))
   REPRESENTATION_ITEM ('')
);
#440 = EDGE_CURVE ('', #390, #320, #430, .T.);
#450 = ORIENTED_EDGE ('', *, *, #440, .F.);
#460 = CARTESIAN_POINT ('', (-17.3866648732032, -1.69000000000006, -4.65874281184526));
#470 = VERTEX_POINT ('', #460);
#480 = CARTESIAN_POINT ('', (-17.3755274873076, -1.69000000000006, -4.67407210843323));
#490 = CARTESIAN_POINT ('', (-17.3866648732032, -1.69000000000006, -4.65874281184524));
#500 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#480, #490), .UNSPECIFIED., .F., .U., (2, 2), (0.997328098018783, 1.), .UNSPECIFIED.);
#510 = EDGE_CURVE ('', #390, #470, #500, .T.);
#520 = ORIENTED_EDGE ('', *, *, #510, .T.);
#530 = CARTESIAN_POINT ('', (-17.3866648732032, -1.65024366918327, -4.65874281184526));
#540 = VERTEX_POINT ('', #530);
#550 = CARTESIAN_POINT ('', (-17.3866648732032, -1.65024366918327, -4.65874281184526));
#560 = CARTESIAN_POINT ('', (-17.3866648732032, -1.69000000000006, -4.65874281184526));
#570 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#550, #560), .UNSPECIFIED., .F., .U., (2, 2), (0.988237771947693, 1.), .UNSPECIFIED.);
#580 = EDGE_CURVE ('', #540, #470, #570, .T.);
#590 = ORIENTED_EDGE ('', *, *, #580, .F.);
#600 = CARTESIAN_POINT ('', (-17.3866648732032, 1.65024366918314, -4.65874281184523));
#610 = VERTEX_POINT ('', #600);
#620 = CARTESIAN_POINT ('', (-17.3866648732032, -1.65024366918327, -4.65874281184526));
#630 = CARTESIAN_POINT ('', (-17.3866648732033, 1.65024366918314, -4.65874281184527));
#640 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#620, #630), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#650 = EDGE_CURVE ('', #540, #610, #640, .T.);
#660 = ORIENTED_EDGE ('', *, *, #650, .T.);
#670 = CARTESIAN_POINT ('', (-17.3866648732033, 1.68999999999994, -4.65874281184527));
#680 = VERTEX_POINT ('', #670);
#690 = CARTESIAN_POINT ('', (-17.3866648732033, 1.68999999999994, -4.65874281184527));
#700 = CARTESIAN_POINT ('', (-17.3866648732033, 1.65024366918314, -4.65874281184527));
#710 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#690, #700), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.0117622280523066), .UNSPECIFIED.);
#720 = EDGE_CURVE ('', #680, #610, #710, .T.);
#730 = ORIENTED_EDGE ('', *, *, #720, .F.);
#740 = CARTESIAN_POINT ('', (-17.3755274873104, 1.68999999999994, -4.67407210842951));
#750 = VERTEX_POINT ('', #740);
#760 = CARTESIAN_POINT ('', (-17.3866648732032, 1.68999999999994, -4.65874281184525));
#770 = CARTESIAN_POINT ('', (-17.3755274873104, 1.68999999999994, -4.67407210842951));
#780 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#760, #770), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.00267190198056718), .UNSPECIFIED.);
#790 = EDGE_CURVE ('', #680, #750, #780, .T.);
#800 = ORIENTED_EDGE ('', *, *, #790, .T.);
#810 = CARTESIAN_POINT ('', (-16.6998651206966, 1.93797958933117, -5.60404157417954));
#820 = VERTEX_POINT ('', #810);
#830 = CARTESIAN_POINT ('', (-16.6998651206966, 1.93797958933117, -5.60404157417954));
#840 = CARTESIAN_POINT ('', (-17.2935046104881, 1.83603226154201, -4.78696691315278));
#850 = CARTESIAN_POINT ('', (-17.3755274873104, 1.68999999999994, -4.67407210842951));
#860 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#830, #840, #850), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0.499999999882903, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.881357264255279, 0.881357264227494, 1.))
   REPRESENTATION_ITEM ('')
);
#870 = EDGE_CURVE ('', #820, #750, #860, .T.);
#880 = ORIENTED_EDGE ('', *, *, #870, .F.);
#890 = CARTESIAN_POINT ('', (-15.3532693711929, 1.68999999999994, -7.45747161797981));
#900 = VERTEX_POINT ('', #890);
#910 = CARTESIAN_POINT ('', (-16.6998651206966, 1.93797958933118, -5.60404157417954));
#920 = CARTESIAN_POINT ('', (-15.3532693711929, 1.68999999999995, -7.45747161797981));
#930 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#910, #920), .UNSPECIFIED., .F., .U., (2, 2), (0.152810919546842, 0.474093465055603), .UNSPECIFIED.);
#940 = EDGE_CURVE ('', #820, #900, #930, .T.);
#950 = ORIENTED_EDGE ('', *, *, #940, .T.);
#960 = CARTESIAN_POINT ('', (-15.3532693711929, 1.68999999999994, -7.45747161797981));
#970 = CARTESIAN_POINT ('', (-15.2774940516086, 1.68999999999995, -7.56176739787348));
#980 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#960, #970), .UNSPECIFIED., .F., .U., (2, 2), (0.487819450754, 0.505998243194401), .UNSPECIFIED.);
#990 = EDGE_CURVE ('', #900, #40, #980, .T.);
#1000 = ORIENTED_EDGE ('', *, *, #990, .T.);
#1010 = EDGE_LOOP ('', (#90, #160, #230, #300, #370, #450, #520, #590, #660, #730, #800, #880, #950, #1000));
#1020 = FACE_OUTER_BOUND ('', #1010, .T.);
#1030 = CARTESIAN_POINT ('', (-17.3866648732032, -1.93797958932567, -4.65874281184523));
#1040 = CARTESIAN_POINT ('', (-14.3079050769054, -1.93797958932566, -8.89629213294317));
#1050 = CARTESIAN_POINT ('', (-17.3866648732032, 1.93797958933117, -4.65874281184524));
#1060 = CARTESIAN_POINT ('', (-14.3079050769054, 1.93797958933118, -8.89629213294318));
#1070 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1030, #1040), (#1050, #1060)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.475141165007457, 0.623783003432575), (0.275035023652072, 0.475906834670991), .UNSPECIFIED.);
#1080 = ADVANCED_FACE ('', (#1020), #1070, .T.);
#1090 = CARTESIAN_POINT ('', (-7.42770730605034, 0.15, -7.05274869647618));
#1100 = VERTEX_POINT ('', #1090);
#1110 = CARTESIAN_POINT ('', (-7.42770730605033, 0.149999999999999, -7.05274869647619));
#1120 = CARTESIAN_POINT ('', (-14.3079050769054, 0.14999999999995, -8.89629213294317));
#1130 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1110, #1120), .UNSPECIFIED., .F., .U., (2, 2), (2.08166817117217E-17, 0.359742670135193), .UNSPECIFIED.);
#1140 = EDGE_CURVE ('', #1100, #20, #1130, .T.);
#1150 = ORIENTED_EDGE ('', *, *, #1140, .F.);
#1160 = CARTESIAN_POINT ('', (-0.547509535195242, 0.15, -5.2092052600092));
#1170 = VERTEX_POINT ('', #1160);
#1180 = CARTESIAN_POINT ('', (-7.42770730605033, 0.149999999999999, -7.05274869647619));
#1190 = CARTESIAN_POINT ('', (-0.547509535195241, 0.149999999999999, -5.2092052600092));
#1200 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1180, #1190), .UNSPECIFIED., .F., .U., (2, 2), (2.08166817117217E-17, 0.359742670135193), .UNSPECIFIED.);
#1210 = EDGE_CURVE ('', #1100, #1170, #1200, .T.);
#1220 = ORIENTED_EDGE ('', *, *, #1210, .T.);
#1230 = CARTESIAN_POINT ('', (-0.547509535195242, -0.150000000000001, -5.2092052600092));
#1240 = VERTEX_POINT ('', #1230);
#1250 = CARTESIAN_POINT ('', (-0.547509535195242, 0.15, -5.2092052600092));
#1260 = CARTESIAN_POINT ('', (-0.547509535195242, -0.150000000000001, -5.2092052600092));
#1270 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1250, #1260), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1280 = EDGE_CURVE ('', #1170, #1240, #1270, .T.);
#1290 = ORIENTED_EDGE ('', *, *, #1280, .T.);
#1300 = CARTESIAN_POINT ('', (-7.42770730605034, -0.150000000000001, -7.05274869647618));
#1310 = VERTEX_POINT ('', #1300);
#1320 = CARTESIAN_POINT ('', (-7.42770730605033, -0.150000000000001, -7.05274869647619));
#1330 = CARTESIAN_POINT ('', (-0.547509535195241, -0.150000000000001, -5.2092052600092));
#1340 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1320, #1330), .UNSPECIFIED., .F., .U., (2, 2), (2.08166817117217E-17, 0.359742670135193), .UNSPECIFIED.);
#1350 = EDGE_CURVE ('', #1310, #1240, #1340, .T.);
#1360 = ORIENTED_EDGE ('', *, *, #1350, .F.);
#1370 = CARTESIAN_POINT ('', (-7.42770730605033, -0.150000000000001, -7.05274869647618));
#1380 = CARTESIAN_POINT ('', (-14.3079050769054, -0.15000000000005, -8.89629213294317));
#1390 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1370, #1380), .UNSPECIFIED., .F., .U., (2, 2), (2.08166817117217E-17, 0.359742670135193), .UNSPECIFIED.);
#1400 = EDGE_CURVE ('', #1310, #110, #1390, .T.);
#1410 = ORIENTED_EDGE ('', *, *, #1400, .T.);
#1420 = ORIENTED_EDGE ('', *, *, #150, .T.);
#1430 = EDGE_LOOP ('', (#1150, #1220, #1290, #1360, #1410, #1420));
#1440 = FACE_OUTER_BOUND ('', #1430, .T.);
#1450 = CARTESIAN_POINT ('', (-0.547509535195248, 0.150000000000049, -5.20920526000919));
#1460 = CARTESIAN_POINT ('', (-14.3079050769054, 0.14999999999995, -8.89629213294317));
#1470 = CARTESIAN_POINT ('', (-0.547509535195246, -0.149999999999988, -5.20920526000919));
#1480 = CARTESIAN_POINT ('', (-14.3079050769054, -0.150000000000087, -8.89629213294317));
#1490 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1450, #1460), (#1470, #1480)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.455621301775148, 0.544378698224863), (-0.791433874297425, 0.791433874297425), .UNSPECIFIED.);
#1500 = ADVANCED_FACE ('', (#1440), #1490, .T.);
#1510 = CARTESIAN_POINT ('', (-10.1834398594354, 1.68999999999999, -1.68590624879554));
#1520 = VERTEX_POINT ('', #1510);
#1530 = CARTESIAN_POINT ('', (-8.81756557825084, 1.69, -1.86572700930387));
#1540 = VERTEX_POINT ('', #1530);
#1550 = CARTESIAN_POINT ('', (-10.1834398594354, 1.68999999999999, -1.68590624879554));
#1560 = CARTESIAN_POINT ('', (-9.53774481774251, 1.68999999999999, -2.05869845493132));
#1570 = CARTESIAN_POINT ('', (-8.81756557825085, 1.69, -1.86572700930387));
#1580 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1550, #1560, #1570), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.923879532511287, 1.))
   REPRESENTATION_ITEM ('')
);
#1590 = EDGE_CURVE ('', #1520, #1540, #1580, .T.);
#1600 = ORIENTED_EDGE ('', *, *, #1590, .F.);
#1610 = CARTESIAN_POINT ('', (-10.1834398594354, -1.69000000000001, -1.68590624879553));
#1620 = VERTEX_POINT ('', #1610);
#1630 = CARTESIAN_POINT ('', (-10.1834398594354, 1.68999999999999, -1.68590624879554));
#1640 = CARTESIAN_POINT ('', (-10.1834398594354, -1.69000000000001, -1.68590624879553));
#1650 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#1630, #1640), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#1660 = EDGE_CURVE ('', #1520, #1620, #1650, .T.);
#1670 = ORIENTED_EDGE ('', *, *, #1660, .T.);
#1680 = CARTESIAN_POINT ('', (-8.81756557825084, -1.69, -1.86572700930387));
#1690 = VERTEX_POINT ('', #1680);
#1700 = CARTESIAN_POINT ('', (-10.1834398594354, -1.69000000000001, -1.68590624879553));
#1710 = CARTESIAN_POINT ('', (-9.53774481774249, -1.69000000000001, -2.05869845493132));
#1720 = CARTESIAN_POINT ('', (-8.81756557825083, -1.69, -1.86572700930387));
#1730 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1700, #1710, #1720), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.923879532511287, 1.))
   REPRESENTATION_ITEM ('')
);
#1740 = EDGE_CURVE ('', #1620, #1690, #1730, .T.);
#1750 = ORIENTED_EDGE ('', *, *, #1740, .T.);
#1760 = CARTESIAN_POINT ('', (-8.81756557825084, -1.69, -1.86572700930387));
#1770 = CARTESIAN_POINT ('', (-8.81756557825084, 1.69, -1.86572700930387));
#1780 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#1760, #1770), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#1790 = EDGE_CURVE ('', #1690, #1540, #1780, .T.);
#1800 = ORIENTED_EDGE ('', *, *, #1790, .T.);
#1810 = EDGE_LOOP ('', (#1600, #1670, #1750, #1800));
#1820 = FACE_OUTER_BOUND ('', #1810, .T.);
#1830 = CARTESIAN_POINT ('', (-10.1834398594354, 1.68999999999999, -1.68590624879554));
#1840 = CARTESIAN_POINT ('', (-9.53774481774251, 1.68999999999999, -2.05869845493132));
#1850 = CARTESIAN_POINT ('', (-8.81756557825085, 1.69, -1.86572700930387));
#1860 = CARTESIAN_POINT ('', (-10.1834398594354, -1.69000000000001, -1.68590624879553));
#1870 = CARTESIAN_POINT ('', (-9.53774481774249, -1.69000000000001, -2.05869845493132));
#1880 = CARTESIAN_POINT ('', (-8.81756557825083, -1.69, -1.86572700930387));
#1890 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#1830, #1840, #1850), (#1860, #1870, #1880)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 3), (0., 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.923879532511287, 1.), (1., 0.923879532511287, 1.)))
   REPRESENTATION_ITEM ('')
);
#1900 = ADVANCED_FACE ('', (#1820), #1890, .T.);
#1910 = CARTESIAN_POINT ('', (-11.2105003814189, 1.68999999999999, -1.09293257995428));
#1920 = VERTEX_POINT ('', #1910);
#1930 = CARTESIAN_POINT ('', (-11.2105003814189, 1.68999999999999, -1.09293257995428));
#1940 = CARTESIAN_POINT ('', (-10.1834398594354, 1.68999999999999, -1.68590624879554));
#1950 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1930, #1940), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1960 = EDGE_CURVE ('', #1920, #1520, #1950, .T.);
#1970 = ORIENTED_EDGE ('', *, *, #1960, .F.);
#1980 = CARTESIAN_POINT ('', (-11.2105003814189, -1.69000000000001, -1.09293257995428));
#1990 = VERTEX_POINT ('', #1980);
#2000 = CARTESIAN_POINT ('', (-11.2105003814189, 1.68999999999999, -1.09293257995428));
#2010 = CARTESIAN_POINT ('', (-11.2105003814189, -1.69000000000001, -1.09293257995428));
#2020 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2000, #2010), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2030 = EDGE_CURVE ('', #1920, #1990, #2020, .T.);
#2040 = ORIENTED_EDGE ('', *, *, #2030, .T.);
#2050 = CARTESIAN_POINT ('', (-11.2105003814189, -1.69000000000001, -1.09293257995428));
#2060 = CARTESIAN_POINT ('', (-10.1834398594354, -1.69000000000001, -1.68590624879553));
#2070 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2050, #2060), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2080 = EDGE_CURVE ('', #1990, #1620, #2070, .T.);
#2090 = ORIENTED_EDGE ('', *, *, #2080, .T.);
#2100 = ORIENTED_EDGE ('', *, *, #1660, .F.);
#2110 = EDGE_LOOP ('', (#1970, #2040, #2090, #2100));
#2120 = FACE_OUTER_BOUND ('', #2110, .T.);
#2130 = CARTESIAN_POINT ('', (-11.2105003814189, 1.68999999999999, -1.09293257995428));
#2140 = CARTESIAN_POINT ('', (-10.1834398594354, 1.68999999999999, -1.68590624879554));
#2150 = CARTESIAN_POINT ('', (-11.2105003814189, -1.69000000000001, -1.09293257995428));
#2160 = CARTESIAN_POINT ('', (-10.1834398594354, -1.69000000000001, -1.68590624879553));
#2170 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2130, #2140), (#2150, #2160)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#2180 = ADVANCED_FACE ('', (#2120), #2170, .T.);
#2190 = CARTESIAN_POINT ('', (-17.0281651713772, 2.05000000000232, -4.45176291249162));
#2200 = VERTEX_POINT ('', #2190);
#2210 = CARTESIAN_POINT ('', (-17.3849496139156, 1.68999999999994, -4.65775250643382));
#2220 = VERTEX_POINT ('', #2210);
#2230 = CARTESIAN_POINT ('', (-17.0281651713772, 2.05000000000232, -4.45176291249162));
#2240 = CARTESIAN_POINT ('', (-17.1751179867777, 2.05592558299332, -4.53660616002123));
#2250 = CARTESIAN_POINT ('', (-17.2808914299927, 1.93797958933587, -4.59767448593456));
#2260 = CARTESIAN_POINT ('', (-17.3723173407214, 1.83603226154583, -4.65045926010465));
#2270 = CARTESIAN_POINT ('', (-17.3849496139156, 1.68999999999994, -4.65775250643382));
#2280 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2230, #2240, #2250, #2260, #2270), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 0.5, 0.936888993299213), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.920504853442952, 1., 0.930538890897036, 0.982464957911835))
   REPRESENTATION_ITEM ('')
);
#2290 = EDGE_CURVE ('', #2200, #2220, #2280, .T.);
#2300 = ORIENTED_EDGE ('', *, *, #2290, .T.);
#2310 = CARTESIAN_POINT ('', (-17.3866648732033, 1.68999999999994, -4.65874281184527));
#2320 = CARTESIAN_POINT ('', (-17.3849496139156, 1.68999999999994, -4.65775250643382));
#2330 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2310, #2320), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.000277722410066823), .UNSPECIFIED.);
#2340 = EDGE_CURVE ('', #680, #2220, #2330, .T.);
#2350 = ORIENTED_EDGE ('', *, *, #2340, .F.);
#2360 = ORIENTED_EDGE ('', *, *, #720, .T.);
#2370 = ORIENTED_EDGE ('', *, *, #650, .F.);
#2380 = ORIENTED_EDGE ('', *, *, #580, .T.);
#2390 = CARTESIAN_POINT ('', (-17.3849496139152, -1.69000000000006, -4.65775250643358));
#2400 = VERTEX_POINT ('', #2390);
#2410 = CARTESIAN_POINT ('', (-17.3866648732032, -1.69000000000006, -4.65874281184526));
#2420 = CARTESIAN_POINT ('', (-17.3849496139152, -1.69000000000006, -4.65775250643358));
#2430 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2410, #2420), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.000277722410134423), .UNSPECIFIED.);
#2440 = EDGE_CURVE ('', #470, #2400, #2430, .T.);
#2450 = ORIENTED_EDGE ('', *, *, #2440, .T.);
#2460 = CARTESIAN_POINT ('', (-17.028165171398, -2.04999999999768, -4.45176291250358));
#2470 = VERTEX_POINT ('', #2460);
#2480 = CARTESIAN_POINT ('', (-17.3849496139152, -1.69000000000006, -4.65775250643358));
#2490 = CARTESIAN_POINT ('', (-17.3723173407199, -1.83603226153744, -4.6504592601038));
#2500 = CARTESIAN_POINT ('', (-17.2808914299985, -1.93797958932411, -4.59767448593789));
#2510 = CARTESIAN_POINT ('', (-17.1751179867912, -2.05592558297835, -4.53660616002904));
#2520 = CARTESIAN_POINT ('', (-17.028165171398, -2.04999999999781, -4.45176291250358));
#2530 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2480, #2490, #2500, #2510, #2520), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0.0631110067035896, 0.5, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.982464957912757, 0.930538890903775, 1., 0.920504853450154, 1.))
   REPRESENTATION_ITEM ('')
);
#2540 = EDGE_CURVE ('', #2400, #2470, #2530, .T.);
#2550 = ORIENTED_EDGE ('', *, *, #2540, .T.);
#2560 = CARTESIAN_POINT ('', (-11.3244870467121, -1.8200104082642, -1.15874281184533));
#2570 = VERTEX_POINT ('', #2560);
#2580 = CARTESIAN_POINT ('', (-17.028165171398, -2.04999999999768, -4.45176291250358));
#2590 = CARTESIAN_POINT ('', (-11.3244870467121, -1.8200104082642, -1.15874281184534));
#2600 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2580, #2590), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2610 = EDGE_CURVE ('', #2470, #2570, #2600, .T.);
#2620 = ORIENTED_EDGE ('', *, *, #2610, .T.);
#2630 = CARTESIAN_POINT ('', (-11.3244870467121, -1.69000000000002, -1.15874281184534));
#2640 = VERTEX_POINT ('', #2630);
#2650 = CARTESIAN_POINT ('', (-11.3244870467121, -1.69000000000002, -1.15874281184534));
#2660 = CARTESIAN_POINT ('', (-11.3244870467121, -1.8200104082642, -1.15874281184533));
#2670 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2650, #2660), .UNSPECIFIED., .F., .U., (2, 2), (0.964283059131464, 1.), .UNSPECIFIED.);
#2680 = EDGE_CURVE ('', #2640, #2570, #2670, .T.);
#2690 = ORIENTED_EDGE ('', *, *, #2680, .F.);
#2700 = CARTESIAN_POINT ('', (-11.3244870467121, -1.69000000000002, -1.15874281184533));
#2710 = CARTESIAN_POINT ('', (-11.2105003814189, -1.69000000000001, -1.09293257995428));
#2720 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2700, #2710), .UNSPECIFIED., .F., .U., (2, 2), (0.981544101449236, 1.), .UNSPECIFIED.);
#2730 = EDGE_CURVE ('', #2640, #1990, #2720, .T.);
#2740 = ORIENTED_EDGE ('', *, *, #2730, .T.);
#2750 = ORIENTED_EDGE ('', *, *, #2030, .F.);
#2760 = CARTESIAN_POINT ('', (-11.3244870467122, 1.68999999999998, -1.15874281184534));
#2770 = VERTEX_POINT ('', #2760);
#2780 = CARTESIAN_POINT ('', (-11.3244870467122, 1.68999999999998, -1.15874281184534));
#2790 = CARTESIAN_POINT ('', (-11.2105003814189, 1.68999999999999, -1.09293257995428));
#2800 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2780, #2790), .UNSPECIFIED., .F., .U., (2, 2), (0.981544101449236, 1.), .UNSPECIFIED.);
#2810 = EDGE_CURVE ('', #2770, #1920, #2800, .T.);
#2820 = ORIENTED_EDGE ('', *, *, #2810, .F.);
#2830 = CARTESIAN_POINT ('', (-11.3244870467122, 1.82001040826417, -1.15874281184534));
#2840 = VERTEX_POINT ('', #2830);
#2850 = CARTESIAN_POINT ('', (-11.3244870467122, 1.82001040826417, -1.15874281184534));
#2860 = CARTESIAN_POINT ('', (-11.3244870467122, 1.68999999999998, -1.15874281184534));
#2870 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2850, #2860), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.0357169408685375), .UNSPECIFIED.);
#2880 = EDGE_CURVE ('', #2840, #2770, #2870, .T.);
#2890 = ORIENTED_EDGE ('', *, *, #2880, .F.);
#2900 = CARTESIAN_POINT ('', (-17.0281651713772, 2.05000000000232, -4.45176291249162));
#2910 = CARTESIAN_POINT ('', (-11.3244870467122, 1.82001040826417, -1.15874281184534));
#2920 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2900, #2910), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2930 = EDGE_CURVE ('', #2200, #2840, #2920, .T.);
#2940 = ORIENTED_EDGE ('', *, *, #2930, .F.);
#2950 = EDGE_LOOP ('', (#2300, #2350, #2360, #2370, #2380, #2450, #2550, #2620, #2690, #2740, #2750, #2820, #2890, #2940));
#2960 = FACE_OUTER_BOUND ('', #2950, .T.);
#2970 = CARTESIAN_POINT ('', (-17.3866648732078, 2.05592558299332, -4.65874281184789));
#2980 = CARTESIAN_POINT ('', (-11.2105003814189, 2.05592558299337, -1.09293257995428));
#2990 = CARTESIAN_POINT ('', (-17.3866648732078, -2.05592558297836, -4.65874281184788));
#3000 = CARTESIAN_POINT ('', (-11.2105003814189, -2.05592558297831, -1.09293257995428));
#3010 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2970, #2980), (#2990, #3000)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.269777439678462, 0.730222560321538), (0.108069976951332, 0.906668883449744), .UNSPECIFIED.);
#3020 = ADVANCED_FACE ('', (#2960), #3010, .T.);
#3030 = ORIENTED_EDGE ('', *, *, #790, .F.);
#3040 = ORIENTED_EDGE ('', *, *, #2340, .T.);
#3050 = CARTESIAN_POINT ('', (-17.3755274873104, 1.68999999999994, -4.67407210842951));
#3060 = CARTESIAN_POINT ('', (-17.3849496139156, 1.68999999999994, -4.65775250643382));
#3070 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3050, #3060), .UNSPECIFIED., .F., .U., (2, 2), (0.995215451285129, 1.), .UNSPECIFIED.);
#3080 = EDGE_CURVE ('', #750, #2220, #3070, .T.);
#3090 = ORIENTED_EDGE ('', *, *, #3080, .F.);
#3100 = EDGE_LOOP ('', (#3030, #3040, #3090));
#3110 = FACE_OUTER_BOUND ('', #3100, .T.);
#3120 = CARTESIAN_POINT ('', (-17.377242746598, 1.68999999999994, -4.67506241384095));
#3130 = CARTESIAN_POINT ('', (-17.3755274873104, 1.68999999999994, -4.67407210842951));
#3140 = CARTESIAN_POINT ('', (-17.3866648732033, 1.68999999999994, -4.65874281184527));
#3150 = CARTESIAN_POINT ('', (-17.3849496139156, 1.68999999999994, -4.65775250643382));
#3160 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3120, #3130), (#3140, #3150)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.759136491327536, 0.760528705656814), (0.221031139104738, 0.221177466727145), .UNSPECIFIED.);
#3170 = ADVANCED_FACE ('', (#3110), #3160, .T.);
#3180 = ORIENTED_EDGE ('', *, *, #870, .T.);
#3190 = ORIENTED_EDGE ('', *, *, #3080, .T.);
#3200 = ORIENTED_EDGE ('', *, *, #2290, .F.);
#3210 = CARTESIAN_POINT ('', (-17.0281651713997, 2.05000000000322, -4.4517629125046));
#3220 = CARTESIAN_POINT ('', (-17.1751179867939, 2.05592558298293, -4.53660616003058));
#3230 = CARTESIAN_POINT ('', (-16.6998651206791, 1.93797958932684, -5.60404157421875));
#3240 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#3210, #3220, #3230), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 0.5), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.920504853449301, 1.))
   REPRESENTATION_ITEM ('')
);
#3250 = EDGE_CURVE ('', #2200, #820, #3240, .T.);
#3260 = ORIENTED_EDGE ('', *, *, #3250, .T.);
#3270 = EDGE_LOOP ('', (#3180, #3190, #3200, #3260));
#3280 = FACE_OUTER_BOUND ('', #3270, .T.);
#3290 = CARTESIAN_POINT ('', (-17.0281651713772, 2.05000000000232, -4.45176291249162));
#3300 = CARTESIAN_POINT ('', (-17.1751179867777, 2.05592558299332, -4.53660616002123));
#3310 = CARTESIAN_POINT ('', (-17.2808914299927, 1.93797958933587, -4.59767448593456));
#3320 = CARTESIAN_POINT ('', (-17.3723173407214, 1.83603226154583, -4.65045926010465));
#3330 = CARTESIAN_POINT ('', (-17.3849496139156, 1.68999999999994, -4.65775250643382));
#3340 = CARTESIAN_POINT ('', (-16.4471388620768, 2.05000000000232, -5.45813000073416));
#3350 = CARTESIAN_POINT ('', (-16.5940916774773, 2.05592558299333, -5.54297324826378));
#3360 = CARTESIAN_POINT ('', (-16.6998651206924, 1.93797958933587, -5.60404157417711));
#3370 = CARTESIAN_POINT ('', (-16.791291031421, 1.83603226154583, -5.6568263483472));
#3380 = CARTESIAN_POINT ('', (-16.8039233046152, 1.68999999999994, -5.66411959467637));
#3390 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#3290, #3300, #3310, #3320, #3330), (#3340, #3350, #3360, #3370, #3380)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 2, 3), (0., 0.162071494923406), (0., 0.5, 0.936888993299215), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.920504853442952, 1., 0.930538890897036, 0.982464957911835), (1., 0.920504853442952, 1., 0.930538890897036, 0.982464957911835)))
   REPRESENTATION_ITEM ('')
);
#3400 = ADVANCED_FACE ('', (#3280), #3390, .T.);
#3410 = ORIENTED_EDGE ('', *, *, #940, .F.);
#3420 = ORIENTED_EDGE ('', *, *, #3250, .F.);
#3430 = ORIENTED_EDGE ('', *, *, #2930, .T.);
#3440 = CARTESIAN_POINT ('', (-10.706380606435, 1.68999999999999, -2.22933457089088));
#3450 = VERTEX_POINT ('', #3440);
#3460 = CARTESIAN_POINT ('', (-11.3244870467122, 1.82001040826418, -1.15874281184534));
#3470 = CARTESIAN_POINT ('', (-10.706380606435, 1.68999999999999, -2.22933457089088));
#3480 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3460, #3470), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.172414627692365), .UNSPECIFIED.);
#3490 = EDGE_CURVE ('', #2840, #3450, #3480, .T.);
#3500 = ORIENTED_EDGE ('', *, *, #3490, .T.);
#3510 = CARTESIAN_POINT ('', (-15.3532693711929, 1.68999999999994, -7.45747161797981));
#3520 = CARTESIAN_POINT ('', (-10.706380606435, 1.68999999999999, -2.22933457089088));
#3530 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3510, #3520), .UNSPECIFIED., .F., .U., (2, 2), (0.0521109130760359, 0.996898499235325), .UNSPECIFIED.);
#3540 = EDGE_CURVE ('', #900, #3450, #3530, .T.);
#3550 = ORIENTED_EDGE ('', *, *, #3540, .F.);
#3560 = EDGE_LOOP ('', (#3410, #3420, #3430, #3500, #3550));
#3570 = FACE_OUTER_BOUND ('', #3560, .T.);
#3580 = CARTESIAN_POINT ('', (-17.2771999900645, 2.06004183879942, -4.59554323209828));
#3590 = CARTESIAN_POINT ('', (-15.5678951712409, 1.6986543628603, -7.5813858814126));
#3600 = CARTESIAN_POINT ('', (-11.3205600252337, 1.81985205885405, -1.15647554493765));
#3610 = CARTESIAN_POINT ('', (-9.61125520641017, 1.45846458291493, -4.14231819425198));
#3620 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3580, #3590), (#3600, #3610)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.244159781661783, 0.561866078905846), (0.231662220644812, 0.391358072707669), .UNSPECIFIED.);
#3630 = ADVANCED_FACE ('', (#3570), #3620, .T.);
#3640 = CARTESIAN_POINT ('', (-10.706380606435, 1.68999999999999, -2.22933457089088));
#3650 = CARTESIAN_POINT ('', (-11.3244870467122, 1.68999999999998, -1.15874281184534));
#3660 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3640, #3650), .UNSPECIFIED., .F., .U., (2, 2), (0.824718994854883, 1.), .UNSPECIFIED.);
#3670 = EDGE_CURVE ('', #3450, #2770, #3660, .T.);
#3680 = ORIENTED_EDGE ('', *, *, #3670, .F.);
#3690 = ORIENTED_EDGE ('', *, *, #3490, .F.);
#3700 = ORIENTED_EDGE ('', *, *, #2880, .T.);
#3710 = EDGE_LOOP ('', (#3680, #3690, #3700));
#3720 = FACE_OUTER_BOUND ('', #3710, .T.);
#3730 = CARTESIAN_POINT ('', (-11.3244870467122, 1.82001040826417, -1.15874281184534));
#3740 = CARTESIAN_POINT ('', (-10.706380606435, 1.82001040826418, -2.22933457089088));
#3750 = CARTESIAN_POINT ('', (-11.3244870467122, 1.68999999999998, -1.15874281184534));
#3760 = CARTESIAN_POINT ('', (-10.706380606435, 1.68999999999999, -2.22933457089088));
#3770 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3730, #3740), (#3750, #3760)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 0.0357169408685376), (0., 0.172414627692366), .UNSPECIFIED.);
#3780 = ADVANCED_FACE ('', (#3720), #3770, .T.);
#3790 = ORIENTED_EDGE ('', *, *, #510, .F.);
#3800 = CARTESIAN_POINT ('', (-17.3755274873076, -1.69000000000006, -4.67407210843323));
#3810 = CARTESIAN_POINT ('', (-17.3849496139152, -1.69000000000006, -4.65775250643358));
#3820 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3800, #3810), .UNSPECIFIED., .F., .U., (2, 2), (0.995215451283898, 1.), .UNSPECIFIED.);
#3830 = EDGE_CURVE ('', #390, #2400, #3820, .T.);
#3840 = ORIENTED_EDGE ('', *, *, #3830, .T.);
#3850 = ORIENTED_EDGE ('', *, *, #2440, .F.);
#3860 = EDGE_LOOP ('', (#3790, #3840, #3850));
#3870 = FACE_OUTER_BOUND ('', #3860, .T.);
#3880 = CARTESIAN_POINT ('', (-17.3772427465957, -1.69000000000006, -4.67506241384491));
#3890 = CARTESIAN_POINT ('', (-17.3866648732032, -1.69000000000006, -4.65874281184526));
#3900 = CARTESIAN_POINT ('', (-17.3755274873076, -1.69000000000006, -4.67407210843323));
#3910 = CARTESIAN_POINT ('', (-17.3849496139152, -1.69000000000006, -4.65775250643358));
#3920 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3880, #3890), (#3900, #3910)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.221031139104738, 0.22117746672718), (0.759136491327197, 0.760528705656814), .UNSPECIFIED.);
#3930 = ADVANCED_FACE ('', (#3870), #3920, .T.);
#3940 = ORIENTED_EDGE ('', *, *, #440, .T.);
#3950 = CARTESIAN_POINT ('', (-16.699865120688, -1.93797958932328, -5.60404157419957));
#3960 = CARTESIAN_POINT ('', (-17.1751179867933, -2.0559255829774, -4.53660616002886));
#3970 = CARTESIAN_POINT ('', (-17.0281651714006, -2.04999999999789, -4.45176291250373));
#3980 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#3950, #3960, #3970), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0.5, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.920504853450735, 1.))
   REPRESENTATION_ITEM ('')
);
#3990 = EDGE_CURVE ('', #320, #2470, #3980, .T.);
#4000 = ORIENTED_EDGE ('', *, *, #3990, .T.);
#4010 = ORIENTED_EDGE ('', *, *, #2540, .F.);
#4020 = ORIENTED_EDGE ('', *, *, #3830, .F.);
#4030 = EDGE_LOOP ('', (#3940, #4000, #4010, #4020));
#4040 = FACE_OUTER_BOUND ('', #4030, .T.);
#4050 = CARTESIAN_POINT ('', (-17.3849496139152, -1.68999999999991, -4.65775250643358));
#4060 = CARTESIAN_POINT ('', (-17.37231734072, -1.83603226153738, -4.65045926010383));
#4070 = CARTESIAN_POINT ('', (-17.2808914299985, -1.93797958932411, -4.59767448593789));
#4080 = CARTESIAN_POINT ('', (-17.1751179867912, -2.05592558297835, -4.53660616002904));
#4090 = CARTESIAN_POINT ('', (-17.028165171398, -2.04999999999781, -4.45176291250358));
#4100 = CARTESIAN_POINT ('', (-16.803923304604, -1.68999999999991, -5.66411959469484));
#4110 = CARTESIAN_POINT ('', (-16.7912910314088, -1.83603226153738, -5.65682634836509));
#4120 = CARTESIAN_POINT ('', (-16.6998651206873, -1.93797958932411, -5.60404157419915));
#4130 = CARTESIAN_POINT ('', (-16.59409167748, -2.05592558297835, -5.54297324829029));
#4140 = CARTESIAN_POINT ('', (-16.4471388620868, -2.04999999999781, -5.45813000076483));
#4150 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#4050, #4060, #4070, #4080, #4090), (#4100, #4110, #4120, #4130, #4140)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 2, 3), (0., 0.162071494926419), (0.0631110067033495, 0.5, 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((0.982464957912815, 0.930538890903737, 1., 0.920504853450154, 1.), (0.982464957912815, 0.930538890903737, 1., 0.920504853450155, 1.)))
   REPRESENTATION_ITEM ('')
);
#4160 = ADVANCED_FACE ('', (#4040), #4150, .T.);
#4170 = ORIENTED_EDGE ('', *, *, #360, .F.);
#4180 = CARTESIAN_POINT ('', (-10.706380606435, -1.69000000000001, -2.22933457089088));
#4190 = VERTEX_POINT ('', #4180);
#4200 = CARTESIAN_POINT ('', (-10.706380606435, -1.69000000000001, -2.22933457089087));
#4210 = CARTESIAN_POINT ('', (-15.3532693712234, -1.69000000000006, -7.45747161793778));
#4220 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4200, #4210), .UNSPECIFIED., .F., .U., (2, 2), (0.00310150076460181, 0.947889086925064), .UNSPECIFIED.);
#4230 = EDGE_CURVE ('', #4190, #250, #4220, .T.);
#4240 = ORIENTED_EDGE ('', *, *, #4230, .F.);
#4250 = CARTESIAN_POINT ('', (-10.706380606435, -1.69000000000001, -2.22933457089088));
#4260 = CARTESIAN_POINT ('', (-11.3244870467121, -1.8200104082642, -1.15874281184534));
#4270 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4250, #4260), .UNSPECIFIED., .F., .U., (2, 2), (0.827585372307634, 1.), .UNSPECIFIED.);
#4280 = EDGE_CURVE ('', #4190, #2570, #4270, .T.);
#4290 = ORIENTED_EDGE ('', *, *, #4280, .T.);
#4300 = ORIENTED_EDGE ('', *, *, #2610, .F.);
#4310 = ORIENTED_EDGE ('', *, *, #3990, .F.);
#4320 = EDGE_LOOP ('', (#4170, #4240, #4290, #4300, #4310));
#4330 = FACE_OUTER_BOUND ('', #4320, .T.);
#4340 = CARTESIAN_POINT ('', (-11.3205600252344, -1.81985205885421, -1.15647554493666));
#4350 = CARTESIAN_POINT ('', (-9.61125520643565, -1.45846458292037, -4.14231819420704));
#4360 = CARTESIAN_POINT ('', (-17.2771999900674, -2.06004183879393, -4.59554323209857));
#4370 = CARTESIAN_POINT ('', (-15.5678951712686, -1.69865436286009, -7.58138588136895));
#4380 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4340, #4350), (#4360, #4370)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.438133816365573, 0.755840289376554), (0.231662143110593, 0.391358083520727), .UNSPECIFIED.);
#4390 = ADVANCED_FACE ('', (#4330), #4380, .T.);
#4400 = ORIENTED_EDGE ('', *, *, #290, .F.);
#4410 = CARTESIAN_POINT ('', (-0.375083219407794, -1.69, -3.56867845010855));
#4420 = VERTEX_POINT ('', #4410);
#4430 = CARTESIAN_POINT ('', (-0.375083219407794, -1.69, -3.56867845010855));
#4440 = CARTESIAN_POINT ('', (-15.2774940516086, -1.69, -7.56176739787348));
#4450 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4430, #4440), .UNSPECIFIED., .F., .U., (2, 2), (0.04792606519852, 1.95207393480148), .UNSPECIFIED.);
#4460 = EDGE_CURVE ('', #4420, #180, #4450, .T.);
#4470 = ORIENTED_EDGE ('', *, *, #4460, .F.);
#4480 = CARTESIAN_POINT ('', (-0.361607757614795, -1.69, -3.440467995421));
#4490 = VERTEX_POINT ('', #4480);
#4500 = CARTESIAN_POINT ('', (-0.361607757614794, -1.69, -3.440467995421));
#4510 = CARTESIAN_POINT ('', (-0.375083219407794, -1.69, -3.56867845010855));
#4520 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4500, #4510), .UNSPECIFIED., .F., .U., (2, 2), (0.487819450754, 0.505998243194401), .UNSPECIFIED.);
#4530 = EDGE_CURVE ('', #4490, #4420, #4520, .T.);
#4540 = ORIENTED_EDGE ('', *, *, #4530, .F.);
#4550 = CARTESIAN_POINT ('', (-7., -1.69, -1.23621288055426));
#4560 = VERTEX_POINT ('', #4550);
#4570 = CARTESIAN_POINT ('', (-0.361607757614795, -1.69, -3.440467995421));
#4580 = CARTESIAN_POINT ('', (-7., -1.69, -1.23621288055426));
#4590 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4570, #4580), .UNSPECIFIED., .F., .U., (2, 2), (0.0521109130760359, 0.996898499235325), .UNSPECIFIED.);
#4600 = EDGE_CURVE ('', #4490, #4560, #4590, .T.);
#4610 = ORIENTED_EDGE ('', *, *, #4600, .T.);
#4620 = CARTESIAN_POINT ('', (-7., -1.69, 0.));
#4630 = VERTEX_POINT ('', #4620);
#4640 = CARTESIAN_POINT ('', (-7., -1.69, -1.23621288055426));
#4650 = CARTESIAN_POINT ('', (-7., -1.69, -1.77635683940025E-15));
#4660 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4640, #4650), .UNSPECIFIED., .F., .U., (2, 2), (0.824718994854883, 1.), .UNSPECIFIED.);
#4670 = EDGE_CURVE ('', #4560, #4630, #4660, .T.);
#4680 = ORIENTED_EDGE ('', *, *, #4670, .T.);
#4690 = CARTESIAN_POINT ('', (-7.13162046378212, -1.69, 8.7337E-16));
#4700 = VERTEX_POINT ('', #4690);
#4710 = CARTESIAN_POINT ('', (-7., -1.69, 8.57251171882719E-16));
#4720 = CARTESIAN_POINT ('', (-7.13162046378212, -1.69, 8.7337E-16));
#4730 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4710, #4720), .UNSPECIFIED., .F., .U., (2, 2), (0.981544101449236, 1.), .UNSPECIFIED.);
#4740 = EDGE_CURVE ('', #4630, #4700, #4730, .T.);
#4750 = ORIENTED_EDGE ('', *, *, #4740, .T.);
#4760 = CARTESIAN_POINT ('', (-7.72459413262338, -1.69, -1.02706052198356));
#4770 = VERTEX_POINT ('', #4760);
#4780 = CARTESIAN_POINT ('', (-7.13162046378212, -1.69, 8.7337E-16));
#4790 = CARTESIAN_POINT ('', (-7.72459413262338, -1.69, -1.02706052198356));
#4800 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4780, #4790), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4810 = EDGE_CURVE ('', #4700, #4770, #4800, .T.);
#4820 = ORIENTED_EDGE ('', *, *, #4810, .T.);
#4830 = CARTESIAN_POINT ('', (-7.72459413262338, -1.69, -1.02706052198356));
#4840 = CARTESIAN_POINT ('', (-8.09738633875917, -1.69, -1.67275556367643));
#4850 = CARTESIAN_POINT ('', (-8.81756557825084, -1.69, -1.86572700930387));
#4860 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#4830, #4840, #4850), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.923879532511287, 1.))
   REPRESENTATION_ITEM ('')
);
#4870 = EDGE_CURVE ('', #4770, #1690, #4860, .T.);
#4880 = ORIENTED_EDGE ('', *, *, #4870, .T.);
#4890 = ORIENTED_EDGE ('', *, *, #1740, .F.);
#4900 = ORIENTED_EDGE ('', *, *, #2080, .F.);
#4910 = ORIENTED_EDGE ('', *, *, #2730, .F.);
#4920 = CARTESIAN_POINT ('', (-11.3244870467121, -1.69000000000002, -1.15874281184534));
#4930 = CARTESIAN_POINT ('', (-10.706380606435, -1.69000000000001, -2.22933457089087));
#4940 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4920, #4930), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.172414627692366), .UNSPECIFIED.);
#4950 = EDGE_CURVE ('', #2640, #4190, #4940, .T.);
#4960 = ORIENTED_EDGE ('', *, *, #4950, .T.);
#4970 = ORIENTED_EDGE ('', *, *, #4230, .T.);
#4980 = EDGE_LOOP ('', (#4400, #4470, #4540, #4610, #4680, #4750, #4820, #4880, #4890, #4900, #4910, #4960, #4970));
#4990 = FACE_OUTER_BOUND ('', #4980, .T.);
#5000 = CARTESIAN_POINT ('', (-13.2926196699714, -1.69000000000005, -11.026621597108));
#5010 = CARTESIAN_POINT ('', (-17.073503368908, -1.69000000000006, -4.47793893304058));
#5020 = CARTESIAN_POINT ('', (-0.309459867667964, -1.68999999999995, -3.53079079031644));
#5030 = CARTESIAN_POINT ('', (-4.09034356660462, -1.68999999999996, 3.01789187375099));
#5040 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5000, #5010), (#5020, #5030)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.247746737547229, 1.35533141521576), (0.20186496831702, 0.760528705656814), .UNSPECIFIED.);
#5050 = ADVANCED_FACE ('', (#4990), #5040, .T.);
#5060 = ORIENTED_EDGE ('', *, *, #4950, .F.);
#5070 = ORIENTED_EDGE ('', *, *, #2680, .T.);
#5080 = ORIENTED_EDGE ('', *, *, #4280, .F.);
#5090 = EDGE_LOOP ('', (#5060, #5070, #5080));
#5100 = FACE_OUTER_BOUND ('', #5090, .T.);
#5110 = CARTESIAN_POINT ('', (-11.3244870467121, -1.69000000000002, -1.15874281184534));
#5120 = CARTESIAN_POINT ('', (-10.706380606435, -1.69000000000001, -2.22933457089087));
#5130 = CARTESIAN_POINT ('', (-11.3244870467121, -1.8200104082642, -1.15874281184534));
#5140 = CARTESIAN_POINT ('', (-10.706380606435, -1.8200104082642, -2.22933457089087));
#5150 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5110, #5120), (#5130, #5140)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.964283059131464, 1.), (0., 0.172414627692366), .UNSPECIFIED.);
#5160 = ADVANCED_FACE ('', (#5100), #5150, .T.);
#5170 = ORIENTED_EDGE ('', *, *, #4870, .F.);
#5180 = CARTESIAN_POINT ('', (-7.72459413262338, 1.69, -1.02706052198356));
#5190 = VERTEX_POINT ('', #5180);
#5200 = CARTESIAN_POINT ('', (-7.72459413262338, -1.69, -1.02706052198356));
#5210 = CARTESIAN_POINT ('', (-7.72459413262338, 1.69, -1.02706052198356));
#5220 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#5200, #5210), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#5230 = EDGE_CURVE ('', #4770, #5190, #5220, .T.);
#5240 = ORIENTED_EDGE ('', *, *, #5230, .T.);
#5250 = CARTESIAN_POINT ('', (-7.72459413262338, 1.69, -1.02706052198356));
#5260 = CARTESIAN_POINT ('', (-8.09738633875917, 1.69, -1.67275556367643));
#5270 = CARTESIAN_POINT ('', (-8.81756557825084, 1.69, -1.86572700930387));
#5280 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5250, #5260, #5270), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.923879532511287, 1.))
   REPRESENTATION_ITEM ('')
);
#5290 = EDGE_CURVE ('', #5190, #1540, #5280, .T.);
#5300 = ORIENTED_EDGE ('', *, *, #5290, .T.);
#5310 = ORIENTED_EDGE ('', *, *, #1790, .F.);
#5320 = EDGE_LOOP ('', (#5170, #5240, #5300, #5310));
#5330 = FACE_OUTER_BOUND ('', #5320, .T.);
#5340 = CARTESIAN_POINT ('', (-7.72459413262338, -1.69, -1.02706052198356));
#5350 = CARTESIAN_POINT ('', (-8.09738633875917, -1.69, -1.67275556367643));
#5360 = CARTESIAN_POINT ('', (-8.81756557825084, -1.69, -1.86572700930387));
#5370 = CARTESIAN_POINT ('', (-7.72459413262338, 1.69, -1.02706052198356));
#5380 = CARTESIAN_POINT ('', (-8.09738633875917, 1.69, -1.67275556367643));
#5390 = CARTESIAN_POINT ('', (-8.81756557825084, 1.69, -1.86572700930387));
#5400 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#5340, #5350, #5360), (#5370, #5380, #5390)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 3), (0., 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.923879532511287, 1.), (1., 0.923879532511287, 1.)))
   REPRESENTATION_ITEM ('')
);
#5410 = ADVANCED_FACE ('', (#5330), #5400, .T.);
#5420 = ORIENTED_EDGE ('', *, *, #4810, .F.);
#5430 = CARTESIAN_POINT ('', (-7.13162046378212, 1.69, 8.7337E-16));
#5440 = VERTEX_POINT ('', #5430);
#5450 = CARTESIAN_POINT ('', (-7.13162046378212, -1.69, 8.7337E-16));
#5460 = CARTESIAN_POINT ('', (-7.13162046378212, 1.69, 8.7337E-16));
#5470 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5450, #5460), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5480 = EDGE_CURVE ('', #4700, #5440, #5470, .T.);
#5490 = ORIENTED_EDGE ('', *, *, #5480, .T.);
#5500 = CARTESIAN_POINT ('', (-7.13162046378212, 1.69, 8.7337E-16));
#5510 = CARTESIAN_POINT ('', (-7.72459413262338, 1.69, -1.02706052198356));
#5520 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5500, #5510), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5530 = EDGE_CURVE ('', #5440, #5190, #5520, .T.);
#5540 = ORIENTED_EDGE ('', *, *, #5530, .T.);
#5550 = ORIENTED_EDGE ('', *, *, #5230, .F.);
#5560 = EDGE_LOOP ('', (#5420, #5490, #5540, #5550));
#5570 = FACE_OUTER_BOUND ('', #5560, .T.);
#5580 = CARTESIAN_POINT ('', (-7.13162046378212, -1.69, 8.7337E-16));
#5590 = CARTESIAN_POINT ('', (-7.72459413262338, -1.69, -1.02706052198356));
#5600 = CARTESIAN_POINT ('', (-7.13162046378212, 1.69, 8.7337E-16));
#5610 = CARTESIAN_POINT ('', (-7.72459413262338, 1.69, -1.02706052198356));
#5620 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5580, #5590), (#5600, #5610)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#5630 = ADVANCED_FACE ('', (#5570), #5620, .T.);
#5640 = CARTESIAN_POINT ('', (-0.122136651816551, -1.93797958933124, -1.16205261860082));
#5650 = VERTEX_POINT ('', #5640);
#5660 = CARTESIAN_POINT ('', (-0.00198061082288348, -1.69, -0.0188442532105575));
#5670 = VERTEX_POINT ('', #5660);
#5680 = CARTESIAN_POINT ('', (-0.122136651816551, -1.93797958933123, -1.16205261860082));
#5690 = CARTESIAN_POINT ('', (-0.0165671034808562, -1.83603226154207, -0.157625460467351));
#5700 = CARTESIAN_POINT ('', (-0.00198061082288358, -1.69, -0.0188442532105574));
#5710 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5680, #5690, #5700), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0.499999999882903, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.881357264255279, 0.881357264227494, 1.))
   REPRESENTATION_ITEM ('')
);
#5720 = EDGE_CURVE ('', #5650, #5670, #5710, .T.);
#5730 = ORIENTED_EDGE ('', *, *, #5720, .T.);
#5740 = CARTESIAN_POINT ('', (-0.00198061082288352, -1.69, 0.));
#5750 = VERTEX_POINT ('', #5740);
#5760 = CARTESIAN_POINT ('', (-0.00198061082288348, -1.69, -0.0188442532105575));
#5770 = CARTESIAN_POINT ('', (-0.00198061082288348, -1.69, 0.));
#5780 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5760, #5770), .UNSPECIFIED., .F., .U., (2, 2), (0.995215451285129, 1.), .UNSPECIFIED.);
#5790 = EDGE_CURVE ('', #5670, #5750, #5780, .T.);
#5800 = ORIENTED_EDGE ('', *, *, #5790, .T.);
#5810 = CARTESIAN_POINT ('', (-0.413959798707312, -2.05000000000238, 0.));
#5820 = VERTEX_POINT ('', #5810);
#5830 = CARTESIAN_POINT ('', (-0.413959798707312, -2.05000000000238, 0.));
#5840 = CARTESIAN_POINT ('', (-0.244273303648078, -2.05592558299339, 0.));
#5850 = CARTESIAN_POINT ('', (-0.122136651821416, -1.93797958933593, 0.));
#5860 = CARTESIAN_POINT ('', (-0.0165671034812377, -1.83603226154589, 0.));
#5870 = CARTESIAN_POINT ('', (-0.00198061082288352, -1.69, 0.));
#5880 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5830, #5840, #5850, #5860, #5870), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 0.5, 0.936888993299213), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.920504853442952, 1., 0.930538890897036, 0.982464957911835))
   REPRESENTATION_ITEM ('')
);
#5890 = EDGE_CURVE ('', #5820, #5750, #5880, .T.);
#5900 = ORIENTED_EDGE ('', *, *, #5890, .F.);
#5910 = CARTESIAN_POINT ('', (-0.413959798681329, -2.05000000000328, 1.77635683940025E-15));
#5920 = CARTESIAN_POINT ('', (-0.244273303629375, -2.055925582983, 2.65032601375981E-15));
#5930 = CARTESIAN_POINT ('', (-0.122136651812065, -1.9379795893269, -1.16205261864351));
#5940 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5910, #5920, #5930), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 0.5), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.920504853449301, 1.))
   REPRESENTATION_ITEM ('')
);
#5950 = EDGE_CURVE ('', #5820, #5650, #5940, .T.);
#5960 = ORIENTED_EDGE ('', *, *, #5950, .T.);
#5970 = EDGE_LOOP ('', (#5730, #5800, #5900, #5960));
#5980 = FACE_OUTER_BOUND ('', #5970, .T.);
#5990 = CARTESIAN_POINT ('', (-0.413959798707312, -2.05000000000238, 0.));
#6000 = CARTESIAN_POINT ('', (-0.244273303648078, -2.05592558299339, 0.));
#6010 = CARTESIAN_POINT ('', (-0.122136651821416, -1.93797958933593, 0.));
#6020 = CARTESIAN_POINT ('', (-0.0165671034812373, -1.83603226154589, 0.));
#6030 = CARTESIAN_POINT ('', (-0.00198061082288343, -1.69, 0.));
#6040 = CARTESIAN_POINT ('', (-0.413959798707312, -2.05000000000238, -1.16205261860082));
#6050 = CARTESIAN_POINT ('', (-0.244273303648078, -2.05592558299339, -1.16205261860082));
#6060 = CARTESIAN_POINT ('', (-0.122136651821416, -1.93797958933593, -1.16205261860082));
#6070 = CARTESIAN_POINT ('', (-0.0165671034812373, -1.83603226154589, -1.16205261860082));
#6080 = CARTESIAN_POINT ('', (-0.00198061082288343, -1.69, -1.16205261860082));
#6090 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#5990, #6000, #6010, #6020, #6030), (#6040, #6050, #6060, #6070, #6080)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 2, 3), (0., 0.162071494923406), (0., 0.5, 0.936888993299215), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.920504853442952, 1., 0.930538890897036, 0.982464957911835), (1., 0.920504853442952, 1., 0.930538890897036, 0.982464957911835)))
   REPRESENTATION_ITEM ('')
);
#6100 = ADVANCED_FACE ('', (#5980), #6090, .T.);
#6110 = ORIENTED_EDGE ('', *, *, #5890, .T.);
#6120 = CARTESIAN_POINT ('', (-2.22044604925031E-16, -1.69, 8.88178419700125E-16));
#6130 = VERTEX_POINT ('', #6120);
#6140 = CARTESIAN_POINT ('', (0., -1.69, 0.));
#6150 = CARTESIAN_POINT ('', (-0.00198061082288344, -1.69, 2.42554421280061E-19));
#6160 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6140, #6150), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.000277722410066823), .UNSPECIFIED.);
#6170 = EDGE_CURVE ('', #6130, #5750, #6160, .T.);
#6180 = ORIENTED_EDGE ('', *, *, #6170, .F.);
#6190 = CARTESIAN_POINT ('', (-7.03326286100037E-14, -1.6502436691832, 0.));
#6200 = VERTEX_POINT ('', #6190);
#6210 = CARTESIAN_POINT ('', (-2.22044604925031E-16, -1.69, 8.88178419700125E-16));
#6220 = CARTESIAN_POINT ('', (-2.22044604925031E-16, -1.6502436691832, 8.88178419700125E-16));
#6230 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6210, #6220), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.0117622280523066), .UNSPECIFIED.);
#6240 = EDGE_CURVE ('', #6130, #6200, #6230, .T.);
#6250 = ORIENTED_EDGE ('', *, *, #6240, .T.);
#6260 = CARTESIAN_POINT ('', (-1.0104828136392E-16, 1.6502436691832, 0.));
#6270 = VERTEX_POINT ('', #6260);
#6280 = CARTESIAN_POINT ('', (-1.0104828136392E-16, 1.6502436691832, 0.));
#6290 = CARTESIAN_POINT ('', (1.0104828136392E-16, -1.6502436691832, 0.));
#6300 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6280, #6290), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6310 = EDGE_CURVE ('', #6270, #6200, #6300, .T.);
#6320 = ORIENTED_EDGE ('', *, *, #6310, .F.);
#6330 = CARTESIAN_POINT ('', (-2.22044604925031E-16, 1.69, 8.88178419700125E-16));
#6340 = VERTEX_POINT ('', #6330);
#6350 = CARTESIAN_POINT ('', (-2.22044604925031E-16, 1.6502436691832, 8.88178419700125E-16));
#6360 = CARTESIAN_POINT ('', (-2.22044604925031E-16, 1.69, 8.88178419700125E-16));
#6370 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6350, #6360), .UNSPECIFIED., .F., .U., (2, 2), (0.988237771947693, 1.), .UNSPECIFIED.);
#6380 = EDGE_CURVE ('', #6270, #6340, #6370, .T.);
#6390 = ORIENTED_EDGE ('', *, *, #6380, .T.);
#6400 = CARTESIAN_POINT ('', (-0.00198061082336562, 1.69, 0.));
#6410 = VERTEX_POINT ('', #6400);
#6420 = CARTESIAN_POINT ('', (0., 1.69, 0.));
#6430 = CARTESIAN_POINT ('', (-0.00198061082336554, 1.69, 2.42554421339101E-19));
#6440 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6420, #6430), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.000277722410134423), .UNSPECIFIED.);
#6450 = EDGE_CURVE ('', #6340, #6410, #6440, .T.);
#6460 = ORIENTED_EDGE ('', *, *, #6450, .T.);
#6470 = CARTESIAN_POINT ('', (-0.413959798683365, 2.04999999999762, 0.));
#6480 = VERTEX_POINT ('', #6470);
#6490 = CARTESIAN_POINT ('', (-0.00198061082336562, 1.69, 0.));
#6500 = CARTESIAN_POINT ('', (-0.0165671034829172, 1.83603226153738, 0.));
#6510 = CARTESIAN_POINT ('', (-0.12213665181474, 1.93797958932405, 0.));
#6520 = CARTESIAN_POINT ('', (-0.244273303632447, 2.05592558297829, 0.));
#6530 = CARTESIAN_POINT ('', (-0.41395979868337, 2.04999999999775, 0.));
#6540 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#6490, #6500, #6510, #6520, #6530), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0.0631110067035896, 0.5, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.982464957912757, 0.930538890903775, 1., 0.920504853450154, 1.))
   REPRESENTATION_ITEM ('')
);
#6550 = EDGE_CURVE ('', #6410, #6480, #6540, .T.);
#6560 = ORIENTED_EDGE ('', *, *, #6550, .T.);
#6570 = CARTESIAN_POINT ('', (-7., 1.82001040826419, 0.));
#6580 = VERTEX_POINT ('', #6570);
#6590 = CARTESIAN_POINT ('', (-0.413959798683365, 2.04999999999762, 0.));
#6600 = CARTESIAN_POINT ('', (-7., 1.82001040826419, 0.));
#6610 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6590, #6600), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6620 = EDGE_CURVE ('', #6480, #6580, #6610, .T.);
#6630 = ORIENTED_EDGE ('', *, *, #6620, .T.);
#6640 = CARTESIAN_POINT ('', (-7., 1.69, 0.));
#6650 = VERTEX_POINT ('', #6640);
#6660 = CARTESIAN_POINT ('', (-7., 1.69, 0.));
#6670 = CARTESIAN_POINT ('', (-7., 1.82001040826419, 0.));
#6680 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6660, #6670), .UNSPECIFIED., .F., .U., (2, 2), (0.964283059131464, 1.), .UNSPECIFIED.);
#6690 = EDGE_CURVE ('', #6650, #6580, #6680, .T.);
#6700 = ORIENTED_EDGE ('', *, *, #6690, .F.);
#6710 = CARTESIAN_POINT ('', (-7., 1.69, 8.57251171882719E-16));
#6720 = CARTESIAN_POINT ('', (-7.13162046378212, 1.69, 8.7337E-16));
#6730 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6710, #6720), .UNSPECIFIED., .F., .U., (2, 2), (0.981544101449236, 1.), .UNSPECIFIED.);
#6740 = EDGE_CURVE ('', #6650, #5440, #6730, .T.);
#6750 = ORIENTED_EDGE ('', *, *, #6740, .T.);
#6760 = ORIENTED_EDGE ('', *, *, #5480, .F.);
#6770 = ORIENTED_EDGE ('', *, *, #4740, .F.);
#6780 = CARTESIAN_POINT ('', (-7., -1.82001040826419, 0.));
#6790 = VERTEX_POINT ('', #6780);
#6800 = CARTESIAN_POINT ('', (-7., -1.82001040826419, 0.));
#6810 = CARTESIAN_POINT ('', (-7., -1.69, 0.));
#6820 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6800, #6810), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.0357169408685375), .UNSPECIFIED.);
#6830 = EDGE_CURVE ('', #6790, #4630, #6820, .T.);
#6840 = ORIENTED_EDGE ('', *, *, #6830, .F.);
#6850 = CARTESIAN_POINT ('', (-0.413959798707312, -2.05000000000238, 0.));
#6860 = CARTESIAN_POINT ('', (-7., -1.82001040826419, 0.));
#6870 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6850, #6860), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6880 = EDGE_CURVE ('', #5820, #6790, #6870, .T.);
#6890 = ORIENTED_EDGE ('', *, *, #6880, .F.);
#6900 = EDGE_LOOP ('', (#6110, #6180, #6250, #6320, #6390, #6460, #6560, #6630, #6700, #6750, #6760, #6770, #6840, #6890));
#6910 = FACE_OUTER_BOUND ('', #6900, .T.);
#6920 = CARTESIAN_POINT ('', (5.24524867984155E-12, -2.05592558299339, 0.));
#6930 = CARTESIAN_POINT ('', (-7.13162046378212, -2.05592558299339, 0.));
#6940 = CARTESIAN_POINT ('', (5.24524867984155E-12, 2.05592558297829, 0.));
#6950 = CARTESIAN_POINT ('', (-7.13162046378212, 2.05592558297829, 0.));
#6960 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#6920, #6930), (#6940, #6950)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.269777439678462, 0.730222560321538), (0.108069976951332, 0.906668883449744), .UNSPECIFIED.);
#6970 = ADVANCED_FACE ('', (#6910), #6960, .T.);
#6980 = CARTESIAN_POINT ('', (-7., 1.69, -1.23621288055427));
#6990 = VERTEX_POINT ('', #6980);
#7000 = CARTESIAN_POINT ('', (-7., 1.69, -1.77635683940025E-15));
#7010 = CARTESIAN_POINT ('', (-7., 1.69, -1.23621288055427));
#7020 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7000, #7010), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.172414627692366), .UNSPECIFIED.);
#7030 = EDGE_CURVE ('', #6650, #6990, #7020, .T.);
#7040 = ORIENTED_EDGE ('', *, *, #7030, .F.);
#7050 = ORIENTED_EDGE ('', *, *, #6690, .T.);
#7060 = CARTESIAN_POINT ('', (-7., 1.69, -1.23621288055427));
#7070 = CARTESIAN_POINT ('', (-7., 1.82001040826419, 0.));
#7080 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7060, #7070), .UNSPECIFIED., .F., .U., (2, 2), (0.827585372307634, 1.), .UNSPECIFIED.);
#7090 = EDGE_CURVE ('', #6990, #6580, #7080, .T.);
#7100 = ORIENTED_EDGE ('', *, *, #7090, .F.);
#7110 = EDGE_LOOP ('', (#7040, #7050, #7100));
#7120 = FACE_OUTER_BOUND ('', #7110, .T.);
#7130 = CARTESIAN_POINT ('', (-7., -1.82001040826419, 0.));
#7140 = CARTESIAN_POINT ('', (-7., -1.82001040826419, -1.23621288055427));
#7150 = CARTESIAN_POINT ('', (-7., 1.82001040826419, 0.));
#7160 = CARTESIAN_POINT ('', (-7., 1.82001040826419, -1.23621288055427));
#7170 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#7130, #7140), (#7150, #7160)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 0.172414627692366), .UNSPECIFIED.);
#7180 = ADVANCED_FACE ('', (#7120), #7170, .T.);
#7190 = ORIENTED_EDGE ('', *, *, #4670, .F.);
#7200 = CARTESIAN_POINT ('', (-7., -1.82001040826419, -3.5527136788005E-15));
#7210 = CARTESIAN_POINT ('', (-7., -1.69, -1.23621288055426));
#7220 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7200, #7210), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.172414627692365), .UNSPECIFIED.);
#7230 = EDGE_CURVE ('', #6790, #4560, #7220, .T.);
#7240 = ORIENTED_EDGE ('', *, *, #7230, .F.);
#7250 = ORIENTED_EDGE ('', *, *, #6830, .T.);
#7260 = EDGE_LOOP ('', (#7190, #7240, #7250));
#7270 = FACE_OUTER_BOUND ('', #7260, .T.);
#7280 = CARTESIAN_POINT ('', (-7., -1.82001040826419, 0.));
#7290 = CARTESIAN_POINT ('', (-7., -1.82001040826419, -1.23621288055427));
#7300 = CARTESIAN_POINT ('', (-7., 1.82001040826419, 0.));
#7310 = CARTESIAN_POINT ('', (-7., 1.82001040826419, -1.23621288055427));
#7320 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#7280, #7290), (#7300, #7310)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 0.172414627692366), .UNSPECIFIED.);
#7330 = ADVANCED_FACE ('', (#7270), #7320, .T.);
#7340 = CARTESIAN_POINT ('', (-0.00198061082336554, 1.69, -0.0188442532151378));
#7350 = VERTEX_POINT ('', #7340);
#7360 = CARTESIAN_POINT ('', (-0.122136651816353, 1.93797958932561, -1.16205261859893));
#7370 = VERTEX_POINT ('', #7360);
#7380 = CARTESIAN_POINT ('', (-0.0019806108233505, 1.68999999999985, -0.0188442532149939));
#7390 = CARTESIAN_POINT ('', (-0.0165671034829816, 1.83603226153858, -0.157625460487566));
#7400 = CARTESIAN_POINT ('', (-0.122136651816353, 1.93797958932561, -1.16205261859893));
#7410 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#7380, #7390, #7400), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 0.500000000117209), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.881357264232055, 0.881357264259867))
   REPRESENTATION_ITEM ('')
);
#7420 = EDGE_CURVE ('', #7350, #7370, #7410, .T.);
#7430 = ORIENTED_EDGE ('', *, *, #7420, .T.);
#7440 = CARTESIAN_POINT ('', (-0.122136651813884, 1.93797958932322, -1.16205261862242));
#7450 = CARTESIAN_POINT ('', (-0.244273303630735, 2.05592558297734, 1.19898537226188E-12));
#7460 = CARTESIAN_POINT ('', (-0.413959798680992, 2.04999999999783, 1.19943853584236E-12));
#7470 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#7440, #7450, #7460), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0.5, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.920504853450735, 1.))
   REPRESENTATION_ITEM ('')
);
#7480 = EDGE_CURVE ('', #7370, #6480, #7470, .T.);
#7490 = ORIENTED_EDGE ('', *, *, #7480, .T.);
#7500 = ORIENTED_EDGE ('', *, *, #6550, .F.);
#7510 = CARTESIAN_POINT ('', (-0.00198061082336554, 1.69, -0.0188442532151378));
#7520 = CARTESIAN_POINT ('', (-0.00198061082336554, 1.69, 0.));
#7530 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7510, #7520), .UNSPECIFIED., .F., .U., (2, 2), (0.995215451283898, 1.), .UNSPECIFIED.);
#7540 = EDGE_CURVE ('', #7350, #6410, #7530, .T.);
#7550 = ORIENTED_EDGE ('', *, *, #7540, .F.);
#7560 = EDGE_LOOP ('', (#7430, #7490, #7500, #7550));
#7570 = FACE_OUTER_BOUND ('', #7560, .T.);
#7580 = CARTESIAN_POINT ('', (-0.00198061082335044, 1.68999999999985, 0.));
#7590 = CARTESIAN_POINT ('', (-0.0165671034828548, 1.83603226153732, 0.));
#7600 = CARTESIAN_POINT ('', (-0.12213665181474, 1.93797958932405, 0.));
#7610 = CARTESIAN_POINT ('', (-0.244273303632447, 2.05592558297829, 0.));
#7620 = CARTESIAN_POINT ('', (-0.41395979868337, 2.04999999999775, 0.));
#7630 = CARTESIAN_POINT ('', (-0.00198061082335044, 1.68999999999985, -1.16205261862242));
#7640 = CARTESIAN_POINT ('', (-0.0165671034828548, 1.83603226153732, -1.16205261862242));
#7650 = CARTESIAN_POINT ('', (-0.12213665181474, 1.93797958932405, -1.16205261862242));
#7660 = CARTESIAN_POINT ('', (-0.244273303632447, 2.05592558297829, -1.16205261862242));
#7670 = CARTESIAN_POINT ('', (-0.41395979868337, 2.04999999999775, -1.16205261862242));
#7680 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#7580, #7590, #7600, #7610, #7620), (#7630, #7640, #7650, #7660, #7670)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 2, 3), (0., 0.162071494926419), (0.0631110067033495, 0.5, 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((0.982464957912815, 0.930538890903737, 1., 0.920504853450154, 1.), (0.982464957912815, 0.930538890903737, 1., 0.920504853450155, 1.)))
   REPRESENTATION_ITEM ('')
);
#7690 = ADVANCED_FACE ('', (#7570), #7680, .T.);
#7700 = CARTESIAN_POINT ('', (-0.361607757609365, 1.69, -3.44046799536935));
#7710 = VERTEX_POINT ('', #7700);
#7720 = CARTESIAN_POINT ('', (-0.361607757609366, 1.69, -3.44046799536935));
#7730 = CARTESIAN_POINT ('', (-0.122136651816353, 1.93797958932561, -1.16205261859893));
#7740 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7720, #7730), .UNSPECIFIED., .F., .U., (2, 2), (0.525906534952999, 0.847189080455548), .UNSPECIFIED.);
#7750 = EDGE_CURVE ('', #7710, #7370, #7740, .T.);
#7760 = ORIENTED_EDGE ('', *, *, #7750, .F.);
#7770 = CARTESIAN_POINT ('', (-7., 1.69, -1.23621288055426));
#7780 = CARTESIAN_POINT ('', (-0.361607757609364, 1.69, -3.44046799536935));
#7790 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7770, #7780), .UNSPECIFIED., .F., .U., (2, 2), (0.00310150076460181, 0.947889086925064), .UNSPECIFIED.);
#7800 = EDGE_CURVE ('', #6990, #7710, #7790, .T.);
#7810 = ORIENTED_EDGE ('', *, *, #7800, .F.);
#7820 = ORIENTED_EDGE ('', *, *, #7090, .T.);
#7830 = ORIENTED_EDGE ('', *, *, #6620, .F.);
#7840 = ORIENTED_EDGE ('', *, *, #7480, .F.);
#7850 = EDGE_LOOP ('', (#7760, #7810, #7820, #7830, #7840));
#7860 = FACE_OUTER_BOUND ('', #7850, .T.);
#7870 = CARTESIAN_POINT ('', (-7.00453453381528, 1.8198520588542, 1.20170540185427E-12));
#7880 = CARTESIAN_POINT ('', (-6.99191460507099, 1.45846458292036, -3.44046799536935));
#7890 = CARTESIAN_POINT ('', (-0.126399159491297, 2.06004183879387, 1.20170540185427E-12));
#7900 = CARTESIAN_POINT ('', (-0.113779230747013, 1.69865436286003, -3.44046799536935));
#7910 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#7870, #7880), (#7890, #7900)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.438133816365573, 0.755840289376554), (0.231662143110593, 0.391358083520727), .UNSPECIFIED.);
#7920 = ADVANCED_FACE ('', (#7860), #7910, .T.);
#7930 = CARTESIAN_POINT ('', (-0.122136651816551, -1.93797958933124, -1.16205261860082));
#7940 = CARTESIAN_POINT ('', (-0.361607757614795, -1.69, -3.440467995421));
#7950 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7930, #7940), .UNSPECIFIED., .F., .U., (2, 2), (0.152810919546842, 0.474093465055603), .UNSPECIFIED.);
#7960 = EDGE_CURVE ('', #5650, #4490, #7950, .T.);
#7970 = ORIENTED_EDGE ('', *, *, #7960, .F.);
#7980 = ORIENTED_EDGE ('', *, *, #5950, .F.);
#7990 = ORIENTED_EDGE ('', *, *, #6880, .T.);
#8000 = ORIENTED_EDGE ('', *, *, #7230, .T.);
#8010 = ORIENTED_EDGE ('', *, *, #4600, .F.);
#8020 = EDGE_LOOP ('', (#7970, #7980, #7990, #8000, #8010));
#8030 = FACE_OUTER_BOUND ('', #8020, .T.);
#8040 = CARTESIAN_POINT ('', (-0.126399159493977, -2.06004183879948, 2.66453525910038E-15));
#8050 = CARTESIAN_POINT ('', (-0.113779230749202, -1.69865436286036, -3.44046799542101));
#8060 = CARTESIAN_POINT ('', (-7.00453453381538, -1.81985205885407, 2.66453525910038E-15));
#8070 = CARTESIAN_POINT ('', (-6.99191460507061, -1.45846458291494, -3.44046799542101));
#8080 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#8040, #8050), (#8060, #8070)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.244159781661783, 0.561866078905846), (0.231662220644812, 0.391358072707669), .UNSPECIFIED.);
#8090 = ADVANCED_FACE ('', (#8030), #8080, .T.);
#8100 = CARTESIAN_POINT ('', (-3.50830475781549E-14, -1.69, 0.));
#8110 = CARTESIAN_POINT ('', (-0.00198061082288348, -1.69, -0.0188442532105573));
#8120 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8100, #8110), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.00267190198056718), .UNSPECIFIED.);
#8130 = EDGE_CURVE ('', #6130, #5670, #8120, .T.);
#8140 = ORIENTED_EDGE ('', *, *, #8130, .F.);
#8150 = ORIENTED_EDGE ('', *, *, #6170, .T.);
#8160 = ORIENTED_EDGE ('', *, *, #5790, .F.);
#8170 = EDGE_LOOP ('', (#8140, #8150, #8160));
#8180 = FACE_OUTER_BOUND ('', #8170, .T.);
#8190 = CARTESIAN_POINT ('', (0., -1.69, -0.0188442532105579));
#8200 = CARTESIAN_POINT ('', (-0.00198061082288348, -1.69, -0.0188442532105579));
#8210 = CARTESIAN_POINT ('', (0., -1.69, 0.));
#8220 = CARTESIAN_POINT ('', (-0.00198061082288348, -1.69, 0.));
#8230 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#8190, #8200), (#8210, #8220)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.759136491327536, 0.760528705656814), (0.221031139104738, 0.221177466727145), .UNSPECIFIED.);
#8240 = ADVANCED_FACE ('', (#8180), #8230, .T.);
#8250 = CARTESIAN_POINT ('', (-0.00198061082336543, 1.69, -0.0188442532151374));
#8260 = CARTESIAN_POINT ('', (-3.56381590904675E-14, 1.69, 0.));
#8270 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8250, #8260), .UNSPECIFIED., .F., .U., (2, 2), (0.997328098018783, 1.), .UNSPECIFIED.);
#8280 = EDGE_CURVE ('', #7350, #6340, #8270, .T.);
#8290 = ORIENTED_EDGE ('', *, *, #8280, .F.);
#8300 = ORIENTED_EDGE ('', *, *, #7540, .T.);
#8310 = ORIENTED_EDGE ('', *, *, #6450, .F.);
#8320 = EDGE_LOOP ('', (#8290, #8300, #8310));
#8330 = FACE_OUTER_BOUND ('', #8320, .T.);
#8340 = CARTESIAN_POINT ('', (0., 1.69, -7.56176739787348));
#8350 = CARTESIAN_POINT ('', (0., 1.69, 0.));
#8360 = CARTESIAN_POINT ('', (-15.3532693711929, 1.69, -7.56176739787348));
#8370 = CARTESIAN_POINT ('', (-15.3532693711929, 1.69, 0.));
#8380 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#8340, #8350), (#8360, #8370)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.221031139104738, 1.35533141521576), (0.20186496831702, 0.760528705656814), .UNSPECIFIED.);
#8390 = ADVANCED_FACE ('', (#8330), #8380, .T.);
#8400 = CARTESIAN_POINT ('', (-0.375083219407795, 1.69, -3.56867845010855));
#8410 = VERTEX_POINT ('', #8400);
#8420 = CARTESIAN_POINT ('', (-0.375083219407795, 1.69, -3.56867845010855));
#8430 = CARTESIAN_POINT ('', (-0.361607757609366, 1.69, -3.44046799536935));
#8440 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8420, #8430), .UNSPECIFIED., .F., .U., (2, 2), (0.494001756805599, 0.512180549253324), .UNSPECIFIED.);
#8450 = EDGE_CURVE ('', #8410, #7710, #8440, .T.);
#8460 = ORIENTED_EDGE ('', *, *, #8450, .F.);
#8470 = CARTESIAN_POINT ('', (-15.2774940516086, 1.68999999999995, -7.56176739787348));
#8480 = CARTESIAN_POINT ('', (-0.375083219407802, 1.69000000000005, -3.56867845010855));
#8490 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8470, #8480), .UNSPECIFIED., .F., .U., (2, 2), (0.04792606519852, 1.95207393480148), .UNSPECIFIED.);
#8500 = EDGE_CURVE ('', #40, #8410, #8490, .T.);
#8510 = ORIENTED_EDGE ('', *, *, #8500, .F.);
#8520 = ORIENTED_EDGE ('', *, *, #990, .F.);
#8530 = ORIENTED_EDGE ('', *, *, #3540, .T.);
#8540 = ORIENTED_EDGE ('', *, *, #3670, .T.);
#8550 = ORIENTED_EDGE ('', *, *, #2810, .T.);
#8560 = ORIENTED_EDGE ('', *, *, #1960, .T.);
#8570 = ORIENTED_EDGE ('', *, *, #1590, .T.);
#8580 = ORIENTED_EDGE ('', *, *, #5290, .F.);
#8590 = ORIENTED_EDGE ('', *, *, #5530, .F.);
#8600 = ORIENTED_EDGE ('', *, *, #6740, .F.);
#8610 = ORIENTED_EDGE ('', *, *, #7030, .T.);
#8620 = ORIENTED_EDGE ('', *, *, #7800, .T.);
#8630 = EDGE_LOOP ('', (#8460, #8510, #8520, #8530, #8540, #8550, #8560, #8570, #8580, #8590, #8600, #8610, #8620));
#8640 = FACE_OUTER_BOUND ('', #8630, .T.);
#8650 = CARTESIAN_POINT ('', (0., 1.69, -7.56176739787348));
#8660 = CARTESIAN_POINT ('', (0., 1.69, 0.));
#8670 = CARTESIAN_POINT ('', (-15.3532693711929, 1.69, -7.56176739787348));
#8680 = CARTESIAN_POINT ('', (-15.3532693711929, 1.69, 0.));
#8690 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#8650, #8660), (#8670, #8680)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.221031139104738, 1.35533141521576), (0.20186496831702, 0.760528705656814), .UNSPECIFIED.);
#8700 = ADVANCED_FACE ('', (#8640), #8690, .T.);
#8710 = CARTESIAN_POINT ('', (-0.547509535195242, -0.15, -5.2092052600092));
#8720 = CARTESIAN_POINT ('', (-0.375083219407794, -1.69, -3.56867845010855));
#8730 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8710, #8720), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.861307371286054), .UNSPECIFIED.);
#8740 = EDGE_CURVE ('', #1240, #4420, #8730, .T.);
#8750 = ORIENTED_EDGE ('', *, *, #8740, .F.);
#8760 = ORIENTED_EDGE ('', *, *, #1280, .F.);
#8770 = CARTESIAN_POINT ('', (-0.375083219407795, 1.69, -3.56867845010855));
#8780 = CARTESIAN_POINT ('', (-0.547509535195242, 0.149999999999999, -5.2092052600092));
#8790 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8770, #8780), .UNSPECIFIED., .F., .U., (2, 2), (0.138692628711238, 1.), .UNSPECIFIED.);
#8800 = EDGE_CURVE ('', #8410, #1170, #8790, .T.);
#8810 = ORIENTED_EDGE ('', *, *, #8800, .F.);
#8820 = ORIENTED_EDGE ('', *, *, #8450, .T.);
#8830 = ORIENTED_EDGE ('', *, *, #7750, .T.);
#8840 = ORIENTED_EDGE ('', *, *, #7420, .F.);
#8850 = ORIENTED_EDGE ('', *, *, #8280, .T.);
#8860 = ORIENTED_EDGE ('', *, *, #6380, .F.);
#8870 = ORIENTED_EDGE ('', *, *, #6310, .T.);
#8880 = ORIENTED_EDGE ('', *, *, #6240, .F.);
#8890 = ORIENTED_EDGE ('', *, *, #8130, .T.);
#8900 = ORIENTED_EDGE ('', *, *, #5720, .F.);
#8910 = ORIENTED_EDGE ('', *, *, #7960, .T.);
#8920 = ORIENTED_EDGE ('', *, *, #4530, .T.);
#8930 = EDGE_LOOP ('', (#8750, #8760, #8810, #8820, #8830, #8840, #8850, #8860, #8870, #8880, #8890, #8900, #8910, #8920));
#8940 = FACE_OUTER_BOUND ('', #8930, .T.);
#8950 = CARTESIAN_POINT ('', (-3.49720252756924E-14, 1.93797958932561, 7.99360577730113E-15));
#8960 = CARTESIAN_POINT ('', (-0.547509535195242, 1.93797958932561, -5.2092052600092));
#8970 = CARTESIAN_POINT ('', (-3.43058914609173E-14, -1.93797958933123, 7.99360577730113E-15));
#8980 = CARTESIAN_POINT ('', (-0.547509535195242, -1.93797958933123, -5.2092052600092));
#8990 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#8950, #8960), (#8970, #8980)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.475141165007457, 0.623783003432575), (0.275035023652072, 0.475906834670991), .UNSPECIFIED.);
#9000 = ADVANCED_FACE ('', (#8940), #8990, .T.);
#9010 = ORIENTED_EDGE ('', *, *, #1210, .F.);
#9020 = ORIENTED_EDGE ('', *, *, #1140, .T.);
#9030 = ORIENTED_EDGE ('', *, *, #80, .T.);
#9040 = ORIENTED_EDGE ('', *, *, #8500, .T.);
#9050 = ORIENTED_EDGE ('', *, *, #8800, .T.);
#9060 = EDGE_LOOP ('', (#9010, #9020, #9030, #9040, #9050));
#9070 = FACE_OUTER_BOUND ('', #9060, .T.);
#9080 = CARTESIAN_POINT ('', (-15.2774940516086, 1.69, -7.56176739787348));
#9090 = CARTESIAN_POINT ('', (-14.8789127221507, 0.149999999999972, -9.04929317035868));
#9100 = CARTESIAN_POINT ('', (-0.375083219407794, 1.69, -3.56867845010855));
#9110 = CARTESIAN_POINT ('', (0.0234981100500872, 0.149999999999972, -5.05620422259375));
#9120 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#9080, #9090), (#9100, #9110)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.389598761749058, 0.389598761749058), (0.268408551068884, 1.00000000000001), .UNSPECIFIED.);
#9130 = ADVANCED_FACE ('', (#9070), #9120, .T.);
#9140 = ORIENTED_EDGE ('', *, *, #4460, .T.);
#9150 = ORIENTED_EDGE ('', *, *, #220, .T.);
#9160 = ORIENTED_EDGE ('', *, *, #1400, .F.);
#9170 = ORIENTED_EDGE ('', *, *, #1350, .T.);
#9180 = ORIENTED_EDGE ('', *, *, #8740, .T.);
#9190 = EDGE_LOOP ('', (#9140, #9150, #9160, #9170, #9180));
#9200 = FACE_OUTER_BOUND ('', #9190, .T.);
#9210 = CARTESIAN_POINT ('', (-14.8789127221507, -0.150000000000001, -9.04929317035865));
#9220 = CARTESIAN_POINT ('', (-15.2774940516086, -1.69000000000003, -7.56176739787345));
#9230 = CARTESIAN_POINT ('', (0.0234981100500766, -0.150000000000001, -5.05620422259372));
#9240 = CARTESIAN_POINT ('', (-0.375083219407804, -1.69000000000003, -3.56867845010853));
#9250 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#9210, #9220), (#9230, #9240)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.389598761749058, 0.389598761749058), (0., 0.731591448931129), .UNSPECIFIED.);
#9260 = ADVANCED_FACE ('', (#9200), #9250, .T.);
#9270 = CLOSED_SHELL ('', (#1080, #1500, #1900, #2180, #3020, #3170, #3400, #3630, #3780, #3930, #4160, #4390, #5050, #5160, #5410, #5630, #6100, #6970, #7180, #7330, #7690, #7920, #8090, #8240, #8390, #8700, #9000, #9130, #9260));
#9280 = MANIFOLD_SOLID_BREP ('', #9270);
#9290 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#9300 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#9310 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#9320 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #9290, 'DISTANCE_ACCURACY_VALUE', '');
#9330 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#9320))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#9290, #9300, #9310))
   REPRESENTATION_CONTEXT ('', '3D')
);
#9340 = COLOUR_RGB ('', 1., 0.74901960784314, 0.);
#9350 = FILL_AREA_STYLE_COLOUR ('', #9340);
#9360 = FILL_AREA_STYLE ('', (#9350));
#9370 = SURFACE_STYLE_FILL_AREA (#9360);
#9380 = SURFACE_SIDE_STYLE ('', (#9370));
#9390 = SURFACE_STYLE_USAGE (.POSITIVE., #9380);
#9400 = PRESENTATION_STYLE_ASSIGNMENT ((#9390));
#9410 = STYLED_ITEM ('', (#9400), #9280);
#9420 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#9280), #9330);
#9430 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#9440 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #9430);
#9450 = MECHANICAL_CONTEXT ('', #9430, 'mechanical');
#9460 = PRODUCT ('product-name', '', '', (#9450));
#9470 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#9480 = PERSON ('', '', $, $, $, $);
#9490 = ORGANIZATION ($, '', '');
#9500 = PERSON_AND_ORGANIZATION (#9480, #9490);
#9510 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#9500, #9470, (#9460));
#9520 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#9460));
#9530 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #9460, .NOT_KNOWN.);
#9540 = APPROVAL_STATUS ('approved');
#9550 = APPROVAL (#9540, '');
#9560 = CALENDAR_DATE (2010, 8, 12);
#9570 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#9580 = LOCAL_TIME (13, 46, 15., #9570);
#9590 = DATE_AND_TIME (#9560, #9580);
#9600 = APPROVAL_DATE_TIME (#9590, #9550);
#9610 = APPROVAL_ROLE ('');
#9620 = PERSON ('', '', $, $, $, $);
#9630 = ORGANIZATION ($, '', '');
#9640 = PERSON_AND_ORGANIZATION (#9620, #9630);
#9650 = APPROVAL_PERSON_ORGANIZATION (#9640, #9550, #9610);
#9660 = CC_DESIGN_APPROVAL (#9550, (#9530));
#9670 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#9680 = PERSON ('', '', $, $, $, $);
#9690 = ORGANIZATION ($, '', '');
#9700 = PERSON_AND_ORGANIZATION (#9680, #9690);
#9710 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#9700, #9670, (#9530));
#9720 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#9730 = PERSON ('', '', $, $, $, $);
#9740 = ORGANIZATION ($, '', '');
#9750 = PERSON_AND_ORGANIZATION (#9730, #9740);
#9760 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#9750, #9720, (#9530));
#9770 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#9780 = SECURITY_CLASSIFICATION ('', '', #9770);
#9790 = APPROVAL_STATUS ('approved');
#9800 = APPROVAL (#9790, '');
#9810 = CALENDAR_DATE (2010, 8, 12);
#9820 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#9830 = LOCAL_TIME (13, 46, 15., #9820);
#9840 = DATE_AND_TIME (#9810, #9830);
#9850 = APPROVAL_DATE_TIME (#9840, #9800);
#9860 = APPROVAL_ROLE ('');
#9870 = PERSON ('', '', $, $, $, $);
#9880 = ORGANIZATION ($, '', '');
#9890 = PERSON_AND_ORGANIZATION (#9870, #9880);
#9900 = APPROVAL_PERSON_ORGANIZATION (#9890, #9800, #9860);
#9910 = CC_DESIGN_APPROVAL (#9800, (#9780));
#9920 = DATE_TIME_ROLE ('classification_date');
#9930 = CALENDAR_DATE (2010, 8, 12);
#9940 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#9950 = LOCAL_TIME (13, 46, 15., #9940);
#9960 = DATE_AND_TIME (#9930, #9950);
#9970 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#9960, #9920, (#9780));
#9980 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#9990 = PERSON ('', '', $, $, $, $);
#10000 = ORGANIZATION ($, '', '');
#10010 = PERSON_AND_ORGANIZATION (#9990, #10000);
#10020 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#10010, #9980, (#9780));
#10030 = CC_DESIGN_SECURITY_CLASSIFICATION (#9780, (#9530));
#10040 = DESIGN_CONTEXT ('', #9430, 'design');
#10050 = PRODUCT_DEFINITION ('', '', #9530, #10040);
#10060 = APPROVAL_STATUS ('approved');
#10070 = APPROVAL (#10060, '');
#10080 = CALENDAR_DATE (2010, 8, 12);
#10090 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#10100 = LOCAL_TIME (13, 46, 15., #10090);
#10110 = DATE_AND_TIME (#10080, #10100);
#10120 = APPROVAL_DATE_TIME (#10110, #10070);
#10130 = APPROVAL_ROLE ('');
#10140 = PERSON ('', '', $, $, $, $);
#10150 = ORGANIZATION ($, '', '');
#10160 = PERSON_AND_ORGANIZATION (#10140, #10150);
#10170 = APPROVAL_PERSON_ORGANIZATION (#10160, #10070, #10130);
#10180 = CC_DESIGN_APPROVAL (#10070, (#10050));
#10190 = DATE_TIME_ROLE ('creation_date');
#10200 = CALENDAR_DATE (2010, 8, 12);
#10210 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#10220 = LOCAL_TIME (13, 46, 15., #10210);
#10230 = DATE_AND_TIME (#10200, #10220);
#10240 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#10230, #10190, (#10050));
#10250 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#10260 = PERSON ('', '', $, $, $, $);
#10270 = ORGANIZATION ($, '', '');
#10280 = PERSON_AND_ORGANIZATION (#10260, #10270);
#10290 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#10280, #10250, (#10050));
#10300 = PRODUCT_DEFINITION_SHAPE ('', '', #10050);
#10310 = SHAPE_DEFINITION_REPRESENTATION (#10300, #9420);
ENDSEC;
END-ISO-10303-21;