ISO-10303-21;
HEADER;
FILE_DESCRIPTION ((), '1');
FILE_NAME ('C:\\TDMTemp\\Tools\\SMLIB\\inserts\\ARNO\\step\\PE15 HSS5_TIALN.stp', '2010-04-26T08:29:40', ('Unknown'), ('Unknown'), 'HarmonyWare STEP v1.4.3', 'HarmonyWare Translators', '');
FILE_SCHEMA (('CONFIG_CONTROL_DESIGN'));
ENDSEC;

DATA;
#10 = CARTESIAN_POINT ('', (0., 0., 0.));
#20 = VERTEX_POINT ('', #10);
#30 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, 1.585));
#40 = VERTEX_POINT ('', #30);
#50 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, 0.));
#60 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, 1.585));
#70 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#50, #60), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#80 = EDGE_CURVE ('', #20, #40, #70, .T.);
#90 = ORIENTED_EDGE ('', *, *, #80, .F.);
#100 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, -1.585));
#110 = VERTEX_POINT ('', #100);
#120 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, 0.));
#130 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, -1.585));
#140 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#120, #130), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#150 = EDGE_CURVE ('', #20, #110, #140, .T.);
#160 = ORIENTED_EDGE ('', *, *, #150, .T.);
#170 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, -1.585));
#180 = VERTEX_POINT ('', #170);
#190 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, -1.585));
#200 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, -1.585));
#210 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#190, #200), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#220 = EDGE_CURVE ('', #180, #110, #210, .T.);
#230 = ORIENTED_EDGE ('', *, *, #220, .F.);
#240 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, 0.));
#250 = VERTEX_POINT ('', #240);
#260 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, 0.));
#270 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, -1.585));
#280 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#260, #270), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#290 = EDGE_CURVE ('', #250, #180, #280, .T.);
#300 = ORIENTED_EDGE ('', *, *, #290, .F.);
#310 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, 1.585));
#320 = VERTEX_POINT ('', #310);
#330 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, 0.));
#340 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, 1.585));
#350 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#330, #340), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#360 = EDGE_CURVE ('', #250, #320, #350, .T.);
#370 = ORIENTED_EDGE ('', *, *, #360, .T.);
#380 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, 1.585));
#390 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, 1.585));
#400 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#380, #390), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#410 = EDGE_CURVE ('', #320, #40, #400, .T.);
#420 = ORIENTED_EDGE ('', *, *, #410, .T.);
#430 = EDGE_LOOP ('', (#90, #160, #230, #300, #370, #420));
#440 = FACE_OUTER_BOUND ('', #430, .T.);
#450 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, -1.585));
#460 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, -1.585));
#470 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, 1.585));
#480 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, 1.585));
#490 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#450, #460), (#470, #480)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1., 1.), (0., 1.), .UNSPECIFIED.);
#500 = ADVANCED_FACE ('', (#440), #490, .T.);
#510 = ORIENTED_EDGE ('', *, *, #360, .F.);
#520 = ORIENTED_EDGE ('', *, *, #290, .T.);
#530 = CARTESIAN_POINT ('', (7.5, 11., -1.585));
#540 = VERTEX_POINT ('', #530);
#550 = CARTESIAN_POINT ('', (7.5, 11., -1.585));
#560 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, -1.585));
#570 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#550, #560), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#580 = EDGE_CURVE ('', #540, #180, #570, .T.);
#590 = ORIENTED_EDGE ('', *, *, #580, .F.);
#600 = CARTESIAN_POINT ('', (7.5, 11., 0.));
#610 = VERTEX_POINT ('', #600);
#620 = CARTESIAN_POINT ('', (7.5, 11., 0.));
#630 = CARTESIAN_POINT ('', (7.5, 11., -1.585));
#640 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#620, #630), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#650 = EDGE_CURVE ('', #610, #540, #640, .T.);
#660 = ORIENTED_EDGE ('', *, *, #650, .F.);
#670 = CARTESIAN_POINT ('', (7.5, 11., 1.585));
#680 = VERTEX_POINT ('', #670);
#690 = CARTESIAN_POINT ('', (7.5, 11., 0.));
#700 = CARTESIAN_POINT ('', (7.5, 11., 1.585));
#710 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#690, #700), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#720 = EDGE_CURVE ('', #610, #680, #710, .T.);
#730 = ORIENTED_EDGE ('', *, *, #720, .T.);
#740 = CARTESIAN_POINT ('', (7.5, 11., 1.585));
#750 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, 1.585));
#760 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#740, #750), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#770 = EDGE_CURVE ('', #680, #320, #760, .T.);
#780 = ORIENTED_EDGE ('', *, *, #770, .T.);
#790 = EDGE_LOOP ('', (#510, #520, #590, #660, #730, #780));
#800 = FACE_OUTER_BOUND ('', #790, .T.);
#810 = CARTESIAN_POINT ('', (7.5, 11., -1.585));
#820 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, -1.585));
#830 = CARTESIAN_POINT ('', (7.5, 11., 1.585));
#840 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, 1.585));
#850 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#810, #820), (#830, #840)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1., 1.), (0., 1.), .UNSPECIFIED.);
#860 = ADVANCED_FACE ('', (#800), #850, .T.);
#870 = ORIENTED_EDGE ('', *, *, #720, .F.);
#880 = ORIENTED_EDGE ('', *, *, #650, .T.);
#890 = CARTESIAN_POINT ('', (-7.5, 11., -1.585));
#900 = VERTEX_POINT ('', #890);
#910 = CARTESIAN_POINT ('', (-7.5, 11., -1.585));
#920 = CARTESIAN_POINT ('', (7.5, 11., -1.585));
#930 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#910, #920), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#940 = EDGE_CURVE ('', #900, #540, #930, .T.);
#950 = ORIENTED_EDGE ('', *, *, #940, .F.);
#960 = CARTESIAN_POINT ('', (-7.5, 11., 0.));
#970 = VERTEX_POINT ('', #960);
#980 = CARTESIAN_POINT ('', (-7.5, 11., 0.));
#990 = CARTESIAN_POINT ('', (-7.5, 11., -1.585));
#1000 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#980, #990), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1010 = EDGE_CURVE ('', #970, #900, #1000, .T.);
#1020 = ORIENTED_EDGE ('', *, *, #1010, .F.);
#1030 = CARTESIAN_POINT ('', (-7.5, 11., 1.585));
#1040 = VERTEX_POINT ('', #1030);
#1050 = CARTESIAN_POINT ('', (-7.5, 11., 0.));
#1060 = CARTESIAN_POINT ('', (-7.5, 11., 1.585));
#1070 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1050, #1060), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1080 = EDGE_CURVE ('', #970, #1040, #1070, .T.);
#1090 = ORIENTED_EDGE ('', *, *, #1080, .T.);
#1100 = CARTESIAN_POINT ('', (-7.5, 11., 1.585));
#1110 = CARTESIAN_POINT ('', (7.5, 11., 1.585));
#1120 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1100, #1110), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1130 = EDGE_CURVE ('', #1040, #680, #1120, .T.);
#1140 = ORIENTED_EDGE ('', *, *, #1130, .T.);
#1150 = EDGE_LOOP ('', (#870, #880, #950, #1020, #1090, #1140));
#1160 = FACE_OUTER_BOUND ('', #1150, .T.);
#1170 = CARTESIAN_POINT ('', (-7.5, 11., -1.585));
#1180 = CARTESIAN_POINT ('', (7.5, 11., -1.585));
#1190 = CARTESIAN_POINT ('', (-7.5, 11., 1.585));
#1200 = CARTESIAN_POINT ('', (7.5, 11., 1.585));
#1210 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1170, #1180), (#1190, #1200)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1., 1.), (0., 1.), .UNSPECIFIED.);
#1220 = ADVANCED_FACE ('', (#1160), #1210, .T.);
#1230 = ORIENTED_EDGE ('', *, *, #1080, .F.);
#1240 = ORIENTED_EDGE ('', *, *, #1010, .T.);
#1250 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, -1.585));
#1260 = VERTEX_POINT ('', #1250);
#1270 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, -1.585));
#1280 = CARTESIAN_POINT ('', (-7.5, 11., -1.585));
#1290 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1270, #1280), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1300 = EDGE_CURVE ('', #1260, #900, #1290, .T.);
#1310 = ORIENTED_EDGE ('', *, *, #1300, .F.);
#1320 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, 0.));
#1330 = VERTEX_POINT ('', #1320);
#1340 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, 0.));
#1350 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, -1.585));
#1360 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1340, #1350), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1370 = EDGE_CURVE ('', #1330, #1260, #1360, .T.);
#1380 = ORIENTED_EDGE ('', *, *, #1370, .F.);
#1390 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, 1.585));
#1400 = VERTEX_POINT ('', #1390);
#1410 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, 0.));
#1420 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, 1.585));
#1430 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1410, #1420), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1440 = EDGE_CURVE ('', #1330, #1400, #1430, .T.);
#1450 = ORIENTED_EDGE ('', *, *, #1440, .T.);
#1460 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, 1.585));
#1470 = CARTESIAN_POINT ('', (-7.5, 11., 1.585));
#1480 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1460, #1470), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1490 = EDGE_CURVE ('', #1400, #1040, #1480, .T.);
#1500 = ORIENTED_EDGE ('', *, *, #1490, .T.);
#1510 = EDGE_LOOP ('', (#1230, #1240, #1310, #1380, #1450, #1500));
#1520 = FACE_OUTER_BOUND ('', #1510, .T.);
#1530 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, -1.585));
#1540 = CARTESIAN_POINT ('', (-7.5, 11., -1.585));
#1550 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, 1.585));
#1560 = CARTESIAN_POINT ('', (-7.5, 11., 1.585));
#1570 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1530, #1540), (#1550, #1560)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1., 1.), (0., 1.), .UNSPECIFIED.);
#1580 = ADVANCED_FACE ('', (#1520), #1570, .T.);
#1590 = ORIENTED_EDGE ('', *, *, #1440, .F.);
#1600 = ORIENTED_EDGE ('', *, *, #1370, .T.);
#1610 = CARTESIAN_POINT ('', (0., 0., -1.585));
#1620 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, -1.585));
#1630 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1610, #1620), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1640 = EDGE_CURVE ('', #110, #1260, #1630, .T.);
#1650 = ORIENTED_EDGE ('', *, *, #1640, .F.);
#1660 = ORIENTED_EDGE ('', *, *, #150, .F.);
#1670 = ORIENTED_EDGE ('', *, *, #80, .T.);
#1680 = CARTESIAN_POINT ('', (0., 0., 1.585));
#1690 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, 1.585));
#1700 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1680, #1690), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1710 = EDGE_CURVE ('', #40, #1400, #1700, .T.);
#1720 = ORIENTED_EDGE ('', *, *, #1710, .T.);
#1730 = EDGE_LOOP ('', (#1590, #1600, #1650, #1660, #1670, #1720));
#1740 = FACE_OUTER_BOUND ('', #1730, .T.);
#1750 = CARTESIAN_POINT ('', (0., 0., -1.585));
#1760 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, -1.585));
#1770 = CARTESIAN_POINT ('', (0., 0., 1.585));
#1780 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, 1.585));
#1790 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1750, #1760), (#1770, #1780)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1., 1.), (0., 1.), .UNSPECIFIED.);
#1800 = ADVANCED_FACE ('', (#1740), #1790, .T.);
#1810 = ORIENTED_EDGE ('', *, *, #410, .F.);
#1820 = ORIENTED_EDGE ('', *, *, #770, .F.);
#1830 = ORIENTED_EDGE ('', *, *, #1130, .F.);
#1840 = ORIENTED_EDGE ('', *, *, #1490, .F.);
#1850 = ORIENTED_EDGE ('', *, *, #1710, .F.);
#1860 = EDGE_LOOP ('', (#1810, #1820, #1830, #1840, #1850));
#1870 = FACE_OUTER_BOUND ('', #1860, .T.);
#1880 = CARTESIAN_POINT ('', (-7.5, 0., 1.585));
#1890 = CARTESIAN_POINT ('', (-7.5, 11., 1.585));
#1900 = CARTESIAN_POINT ('', (7.5, 0., 1.585));
#1910 = CARTESIAN_POINT ('', (7.5, 11., 1.585));
#1920 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1880, #1890), (#1900, #1910)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.133452274611043, 0.866547725388957), (0.231198334714765, 0.768801665285235), .UNSPECIFIED.);
#1930 = ADVANCED_FACE ('', (#1870), #1920, .T.);
#1940 = ORIENTED_EDGE ('', *, *, #220, .T.);
#1950 = ORIENTED_EDGE ('', *, *, #1640, .T.);
#1960 = ORIENTED_EDGE ('', *, *, #1300, .T.);
#1970 = ORIENTED_EDGE ('', *, *, #940, .T.);
#1980 = ORIENTED_EDGE ('', *, *, #580, .T.);
#1990 = EDGE_LOOP ('', (#1940, #1950, #1960, #1970, #1980));
#2000 = FACE_OUTER_BOUND ('', #1990, .T.);
#2010 = CARTESIAN_POINT ('', (-7.5, 0., -1.585));
#2020 = CARTESIAN_POINT ('', (7.5, 0., -1.585));
#2030 = CARTESIAN_POINT ('', (-7.5, 11., -1.585));
#2040 = CARTESIAN_POINT ('', (7.5, 11., -1.585));
#2050 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2010, #2020), (#2030, #2040)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.231198334714765, 0.768801665285235), (0.133452274611043, 0.866547725388957), .UNSPECIFIED.);
#2060 = ADVANCED_FACE ('', (#2000), #2050, .T.);
#2070 = CLOSED_SHELL ('', (#500, #860, #1220, #1580, #1800, #1930, #2060));
#2080 = MANIFOLD_SOLID_BREP ('', #2070);
#2090 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#2100 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#2110 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#2120 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #2090, 'DISTANCE_ACCURACY_VALUE', '');
#2130 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#2120))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#2090, #2100, #2110))
   REPRESENTATION_CONTEXT ('', '3D')
);
#2140 = COLOUR_RGB ('', 1., 0.74901960784314, 0.);
#2150 = FILL_AREA_STYLE_COLOUR ('', #2140);
#2160 = FILL_AREA_STYLE ('', (#2150));
#2170 = SURFACE_STYLE_FILL_AREA (#2160);
#2180 = SURFACE_SIDE_STYLE ('', (#2170));
#2190 = SURFACE_STYLE_USAGE (.POSITIVE., #2180);
#2200 = PRESENTATION_STYLE_ASSIGNMENT ((#2190));
#2210 = STYLED_ITEM ('', (#2200), #2080);
#2220 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#2080), #2130);
#2230 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#2240 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #2230);
#2250 = MECHANICAL_CONTEXT ('', #2230, 'mechanical');
#2260 = PRODUCT ('product-name', '', '', (#2250));
#2270 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#2280 = PERSON ('', '', $, $, $, $);
#2290 = ORGANIZATION ($, '', '');
#2300 = PERSON_AND_ORGANIZATION (#2280, #2290);
#2310 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#2300, #2270, (#2260));
#2320 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#2260));
#2330 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #2260, .NOT_KNOWN.);
#2340 = APPROVAL_STATUS ('approved');
#2350 = APPROVAL (#2340, '');
#2360 = CALENDAR_DATE (2010, 26, 4);
#2370 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#2380 = LOCAL_TIME (8, 29, 40., #2370);
#2390 = DATE_AND_TIME (#2360, #2380);
#2400 = APPROVAL_DATE_TIME (#2390, #2350);
#2410 = APPROVAL_ROLE ('');
#2420 = PERSON ('', '', $, $, $, $);
#2430 = ORGANIZATION ($, '', '');
#2440 = PERSON_AND_ORGANIZATION (#2420, #2430);
#2450 = APPROVAL_PERSON_ORGANIZATION (#2440, #2350, #2410);
#2460 = CC_DESIGN_APPROVAL (#2350, (#2330));
#2470 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#2480 = PERSON ('', '', $, $, $, $);
#2490 = ORGANIZATION ($, '', '');
#2500 = PERSON_AND_ORGANIZATION (#2480, #2490);
#2510 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#2500, #2470, (#2330));
#2520 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#2530 = PERSON ('', '', $, $, $, $);
#2540 = ORGANIZATION ($, '', '');
#2550 = PERSON_AND_ORGANIZATION (#2530, #2540);
#2560 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#2550, #2520, (#2330));
#2570 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#2580 = SECURITY_CLASSIFICATION ('', '', #2570);
#2590 = APPROVAL_STATUS ('approved');
#2600 = APPROVAL (#2590, '');
#2610 = CALENDAR_DATE (2010, 26, 4);
#2620 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#2630 = LOCAL_TIME (8, 29, 40., #2620);
#2640 = DATE_AND_TIME (#2610, #2630);
#2650 = APPROVAL_DATE_TIME (#2640, #2600);
#2660 = APPROVAL_ROLE ('');
#2670 = PERSON ('', '', $, $, $, $);
#2680 = ORGANIZATION ($, '', '');
#2690 = PERSON_AND_ORGANIZATION (#2670, #2680);
#2700 = APPROVAL_PERSON_ORGANIZATION (#2690, #2600, #2660);
#2710 = CC_DESIGN_APPROVAL (#2600, (#2580));
#2720 = DATE_TIME_ROLE ('classification_date');
#2730 = CALENDAR_DATE (2010, 26, 4);
#2740 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#2750 = LOCAL_TIME (8, 29, 40., #2740);
#2760 = DATE_AND_TIME (#2730, #2750);
#2770 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#2760, #2720, (#2580));
#2780 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#2790 = PERSON ('', '', $, $, $, $);
#2800 = ORGANIZATION ($, '', '');
#2810 = PERSON_AND_ORGANIZATION (#2790, #2800);
#2820 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#2810, #2780, (#2580));
#2830 = CC_DESIGN_SECURITY_CLASSIFICATION (#2580, (#2330));
#2840 = DESIGN_CONTEXT ('', #2230, 'design');
#2850 = PRODUCT_DEFINITION ('', '', #2330, #2840);
#2860 = APPROVAL_STATUS ('approved');
#2870 = APPROVAL (#2860, '');
#2880 = CALENDAR_DATE (2010, 26, 4);
#2890 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#2900 = LOCAL_TIME (8, 29, 40., #2890);
#2910 = DATE_AND_TIME (#2880, #2900);
#2920 = APPROVAL_DATE_TIME (#2910, #2870);
#2930 = APPROVAL_ROLE ('');
#2940 = PERSON ('', '', $, $, $, $);
#2950 = ORGANIZATION ($, '', '');
#2960 = PERSON_AND_ORGANIZATION (#2940, #2950);
#2970 = APPROVAL_PERSON_ORGANIZATION (#2960, #2870, #2930);
#2980 = CC_DESIGN_APPROVAL (#2870, (#2850));
#2990 = DATE_TIME_ROLE ('creation_date');
#3000 = CALENDAR_DATE (2010, 26, 4);
#3010 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#3020 = LOCAL_TIME (8, 29, 40., #3010);
#3030 = DATE_AND_TIME (#3000, #3020);
#3040 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#3030, #2990, (#2850));
#3050 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#3060 = PERSON ('', '', $, $, $, $);
#3070 = ORGANIZATION ($, '', '');
#3080 = PERSON_AND_ORGANIZATION (#3060, #3070);
#3090 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#3080, #3050, (#2850));
#3100 = PRODUCT_DEFINITION_SHAPE ('', '', #2850);
#3110 = SHAPE_DEFINITION_REPRESENTATION (#3100, #2220);
#3120 = CARTESIAN_POINT ('', (0., 0., 0.));
#3130 = VERTEX_POINT ('', #3120);
#3140 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, 1.585));
#3150 = VERTEX_POINT ('', #3140);
#3160 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, 0.));
#3170 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, 1.585));
#3180 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3160, #3170), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3190 = EDGE_CURVE ('', #3130, #3150, #3180, .T.);
#3200 = ORIENTED_EDGE ('', *, *, #3190, .F.);
#3210 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, -1.585));
#3220 = VERTEX_POINT ('', #3210);
#3230 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, 0.));
#3240 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, -1.585));
#3250 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3230, #3240), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3260 = EDGE_CURVE ('', #3130, #3220, #3250, .T.);
#3270 = ORIENTED_EDGE ('', *, *, #3260, .T.);
#3280 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, -1.585));
#3290 = VERTEX_POINT ('', #3280);
#3300 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, -1.585));
#3310 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, -1.585));
#3320 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3300, #3310), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3330 = EDGE_CURVE ('', #3290, #3220, #3320, .T.);
#3340 = ORIENTED_EDGE ('', *, *, #3330, .F.);
#3350 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, 0.));
#3360 = VERTEX_POINT ('', #3350);
#3370 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, 0.));
#3380 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, -1.585));
#3390 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3370, #3380), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3400 = EDGE_CURVE ('', #3360, #3290, #3390, .T.);
#3410 = ORIENTED_EDGE ('', *, *, #3400, .F.);
#3420 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, 1.585));
#3430 = VERTEX_POINT ('', #3420);
#3440 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, 0.));
#3450 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, 1.585));
#3460 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3440, #3450), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3470 = EDGE_CURVE ('', #3360, #3430, #3460, .T.);
#3480 = ORIENTED_EDGE ('', *, *, #3470, .T.);
#3490 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, 1.585));
#3500 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, 1.585));
#3510 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3490, #3500), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3520 = EDGE_CURVE ('', #3430, #3150, #3510, .T.);
#3530 = ORIENTED_EDGE ('', *, *, #3520, .T.);
#3540 = EDGE_LOOP ('', (#3200, #3270, #3340, #3410, #3480, #3530));
#3550 = FACE_OUTER_BOUND ('', #3540, .T.);
#3560 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, -1.585));
#3570 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, -1.585));
#3580 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, 1.585));
#3590 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, 1.585));
#3600 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3560, #3570), (#3580, #3590)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1., 1.), (0., 1.), .UNSPECIFIED.);
#3610 = ADVANCED_FACE ('', (#3550), #3600, .T.);
#3620 = ORIENTED_EDGE ('', *, *, #3470, .F.);
#3630 = ORIENTED_EDGE ('', *, *, #3400, .T.);
#3640 = CARTESIAN_POINT ('', (7.5, 11., -1.585));
#3650 = VERTEX_POINT ('', #3640);
#3660 = CARTESIAN_POINT ('', (7.5, 11., -1.585));
#3670 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, -1.585));
#3680 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3660, #3670), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3690 = EDGE_CURVE ('', #3650, #3290, #3680, .T.);
#3700 = ORIENTED_EDGE ('', *, *, #3690, .F.);
#3710 = CARTESIAN_POINT ('', (7.5, 11., 0.));
#3720 = VERTEX_POINT ('', #3710);
#3730 = CARTESIAN_POINT ('', (7.5, 11., 0.));
#3740 = CARTESIAN_POINT ('', (7.5, 11., -1.585));
#3750 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3730, #3740), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3760 = EDGE_CURVE ('', #3720, #3650, #3750, .T.);
#3770 = ORIENTED_EDGE ('', *, *, #3760, .F.);
#3780 = CARTESIAN_POINT ('', (7.5, 11., 1.585));
#3790 = VERTEX_POINT ('', #3780);
#3800 = CARTESIAN_POINT ('', (7.5, 11., 0.));
#3810 = CARTESIAN_POINT ('', (7.5, 11., 1.585));
#3820 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3800, #3810), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3830 = EDGE_CURVE ('', #3720, #3790, #3820, .T.);
#3840 = ORIENTED_EDGE ('', *, *, #3830, .T.);
#3850 = CARTESIAN_POINT ('', (7.5, 11., 1.585));
#3860 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, 1.585));
#3870 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3850, #3860), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3880 = EDGE_CURVE ('', #3790, #3430, #3870, .T.);
#3890 = ORIENTED_EDGE ('', *, *, #3880, .T.);
#3900 = EDGE_LOOP ('', (#3620, #3630, #3700, #3770, #3840, #3890));
#3910 = FACE_OUTER_BOUND ('', #3900, .T.);
#3920 = CARTESIAN_POINT ('', (7.5, 11., -1.585));
#3930 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, -1.585));
#3940 = CARTESIAN_POINT ('', (7.5, 11., 1.585));
#3950 = CARTESIAN_POINT ('', (7.5, 3.33921513981402, 1.585));
#3960 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3920, #3930), (#3940, #3950)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1., 1.), (0., 1.), .UNSPECIFIED.);
#3970 = ADVANCED_FACE ('', (#3910), #3960, .T.);
#3980 = ORIENTED_EDGE ('', *, *, #3830, .F.);
#3990 = ORIENTED_EDGE ('', *, *, #3760, .T.);
#4000 = CARTESIAN_POINT ('', (-7.5, 11., -1.585));
#4010 = VERTEX_POINT ('', #4000);
#4020 = CARTESIAN_POINT ('', (-7.5, 11., -1.585));
#4030 = CARTESIAN_POINT ('', (7.5, 11., -1.585));
#4040 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4020, #4030), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4050 = EDGE_CURVE ('', #4010, #3650, #4040, .T.);
#4060 = ORIENTED_EDGE ('', *, *, #4050, .F.);
#4070 = CARTESIAN_POINT ('', (-7.5, 11., 0.));
#4080 = VERTEX_POINT ('', #4070);
#4090 = CARTESIAN_POINT ('', (-7.5, 11., 0.));
#4100 = CARTESIAN_POINT ('', (-7.5, 11., -1.585));
#4110 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4090, #4100), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4120 = EDGE_CURVE ('', #4080, #4010, #4110, .T.);
#4130 = ORIENTED_EDGE ('', *, *, #4120, .F.);
#4140 = CARTESIAN_POINT ('', (-7.5, 11., 1.585));
#4150 = VERTEX_POINT ('', #4140);
#4160 = CARTESIAN_POINT ('', (-7.5, 11., 0.));
#4170 = CARTESIAN_POINT ('', (-7.5, 11., 1.585));
#4180 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4160, #4170), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4190 = EDGE_CURVE ('', #4080, #4150, #4180, .T.);
#4200 = ORIENTED_EDGE ('', *, *, #4190, .T.);
#4210 = CARTESIAN_POINT ('', (-7.5, 11., 1.585));
#4220 = CARTESIAN_POINT ('', (7.5, 11., 1.585));
#4230 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4210, #4220), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4240 = EDGE_CURVE ('', #4150, #3790, #4230, .T.);
#4250 = ORIENTED_EDGE ('', *, *, #4240, .T.);
#4260 = EDGE_LOOP ('', (#3980, #3990, #4060, #4130, #4200, #4250));
#4270 = FACE_OUTER_BOUND ('', #4260, .T.);
#4280 = CARTESIAN_POINT ('', (-7.5, 11., -1.585));
#4290 = CARTESIAN_POINT ('', (7.5, 11., -1.585));
#4300 = CARTESIAN_POINT ('', (-7.5, 11., 1.585));
#4310 = CARTESIAN_POINT ('', (7.5, 11., 1.585));
#4320 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4280, #4290), (#4300, #4310)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1., 1.), (0., 1.), .UNSPECIFIED.);
#4330 = ADVANCED_FACE ('', (#4270), #4320, .T.);
#4340 = ORIENTED_EDGE ('', *, *, #4190, .F.);
#4350 = ORIENTED_EDGE ('', *, *, #4120, .T.);
#4360 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, -1.585));
#4370 = VERTEX_POINT ('', #4360);
#4380 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, -1.585));
#4390 = CARTESIAN_POINT ('', (-7.5, 11., -1.585));
#4400 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4380, #4390), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4410 = EDGE_CURVE ('', #4370, #4010, #4400, .T.);
#4420 = ORIENTED_EDGE ('', *, *, #4410, .F.);
#4430 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, 0.));
#4440 = VERTEX_POINT ('', #4430);
#4450 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, 0.));
#4460 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, -1.585));
#4470 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4450, #4460), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4480 = EDGE_CURVE ('', #4440, #4370, #4470, .T.);
#4490 = ORIENTED_EDGE ('', *, *, #4480, .F.);
#4500 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, 1.585));
#4510 = VERTEX_POINT ('', #4500);
#4520 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, 0.));
#4530 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, 1.585));
#4540 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4520, #4530), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4550 = EDGE_CURVE ('', #4440, #4510, #4540, .T.);
#4560 = ORIENTED_EDGE ('', *, *, #4550, .T.);
#4570 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, 1.585));
#4580 = CARTESIAN_POINT ('', (-7.5, 11., 1.585));
#4590 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4570, #4580), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4600 = EDGE_CURVE ('', #4510, #4150, #4590, .T.);
#4610 = ORIENTED_EDGE ('', *, *, #4600, .T.);
#4620 = EDGE_LOOP ('', (#4340, #4350, #4420, #4490, #4560, #4610));
#4630 = FACE_OUTER_BOUND ('', #4620, .T.);
#4640 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, -1.585));
#4650 = CARTESIAN_POINT ('', (-7.5, 11., -1.585));
#4660 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, 1.585));
#4670 = CARTESIAN_POINT ('', (-7.5, 11., 1.585));
#4680 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4640, #4650), (#4660, #4670)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1., 1.), (0., 1.), .UNSPECIFIED.);
#4690 = ADVANCED_FACE ('', (#4630), #4680, .T.);
#4700 = ORIENTED_EDGE ('', *, *, #4550, .F.);
#4710 = ORIENTED_EDGE ('', *, *, #4480, .T.);
#4720 = CARTESIAN_POINT ('', (0., 0., -1.585));
#4730 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, -1.585));
#4740 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4720, #4730), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4750 = EDGE_CURVE ('', #3220, #4370, #4740, .T.);
#4760 = ORIENTED_EDGE ('', *, *, #4750, .F.);
#4770 = ORIENTED_EDGE ('', *, *, #3260, .F.);
#4780 = ORIENTED_EDGE ('', *, *, #3190, .T.);
#4790 = CARTESIAN_POINT ('', (0., 0., 1.585));
#4800 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, 1.585));
#4810 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4790, #4800), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4820 = EDGE_CURVE ('', #3150, #4510, #4810, .T.);
#4830 = ORIENTED_EDGE ('', *, *, #4820, .T.);
#4840 = EDGE_LOOP ('', (#4700, #4710, #4760, #4770, #4780, #4830));
#4850 = FACE_OUTER_BOUND ('', #4840, .T.);
#4860 = CARTESIAN_POINT ('', (0., 0., -1.585));
#4870 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, -1.585));
#4880 = CARTESIAN_POINT ('', (0., 0., 1.585));
#4890 = CARTESIAN_POINT ('', (-7.5, 3.33921513981402, 1.585));
#4900 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4860, #4870), (#4880, #4890)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1., 1.), (0., 1.), .UNSPECIFIED.);
#4910 = ADVANCED_FACE ('', (#4850), #4900, .T.);
#4920 = ORIENTED_EDGE ('', *, *, #3520, .F.);
#4930 = ORIENTED_EDGE ('', *, *, #3880, .F.);
#4940 = ORIENTED_EDGE ('', *, *, #4240, .F.);
#4950 = ORIENTED_EDGE ('', *, *, #4600, .F.);
#4960 = ORIENTED_EDGE ('', *, *, #4820, .F.);
#4970 = EDGE_LOOP ('', (#4920, #4930, #4940, #4950, #4960));
#4980 = FACE_OUTER_BOUND ('', #4970, .T.);
#4990 = CARTESIAN_POINT ('', (-7.5, 0., 1.585));
#5000 = CARTESIAN_POINT ('', (-7.5, 11., 1.585));
#5010 = CARTESIAN_POINT ('', (7.5, 0., 1.585));
#5020 = CARTESIAN_POINT ('', (7.5, 11., 1.585));
#5030 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4990, #5000), (#5010, #5020)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.133452274611043, 0.866547725388957), (0.231198334714765, 0.768801665285235), .UNSPECIFIED.);
#5040 = ADVANCED_FACE ('', (#4980), #5030, .T.);
#5050 = ORIENTED_EDGE ('', *, *, #3330, .T.);
#5060 = ORIENTED_EDGE ('', *, *, #4750, .T.);
#5070 = ORIENTED_EDGE ('', *, *, #4410, .T.);
#5080 = ORIENTED_EDGE ('', *, *, #4050, .T.);
#5090 = ORIENTED_EDGE ('', *, *, #3690, .T.);
#5100 = EDGE_LOOP ('', (#5050, #5060, #5070, #5080, #5090));
#5110 = FACE_OUTER_BOUND ('', #5100, .T.);
#5120 = CARTESIAN_POINT ('', (-7.5, 0., -1.585));
#5130 = CARTESIAN_POINT ('', (7.5, 0., -1.585));
#5140 = CARTESIAN_POINT ('', (-7.5, 11., -1.585));
#5150 = CARTESIAN_POINT ('', (7.5, 11., -1.585));
#5160 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5120, #5130), (#5140, #5150)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.231198334714765, 0.768801665285235), (0.133452274611043, 0.866547725388957), .UNSPECIFIED.);
#5170 = ADVANCED_FACE ('', (#5110), #5160, .T.);
#5180 = CLOSED_SHELL ('', (#3610, #3970, #4330, #4690, #4910, #5040, #5170));
#5190 = MANIFOLD_SOLID_BREP ('', #5180);
#5200 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#5210 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#5220 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#5230 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #5200, 'DISTANCE_ACCURACY_VALUE', '');
#5240 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#5230))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#5200, #5210, #5220))
   REPRESENTATION_CONTEXT ('', '3D')
);
#5250 = COLOUR_RGB ('', 1., 0.74901960784314, 0.);
#5260 = FILL_AREA_STYLE_COLOUR ('', #5250);
#5270 = FILL_AREA_STYLE ('', (#5260));
#5280 = SURFACE_STYLE_FILL_AREA (#5270);
#5290 = SURFACE_SIDE_STYLE ('', (#5280));
#5300 = SURFACE_STYLE_USAGE (.POSITIVE., #5290);
#5310 = PRESENTATION_STYLE_ASSIGNMENT ((#5300));
#5320 = STYLED_ITEM ('', (#5310), #5190);
#5330 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#5190), #5240);
#5340 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#5350 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #5340);
#5360 = MECHANICAL_CONTEXT ('', #5340, 'mechanical');
#5370 = PRODUCT ('product-name', '', '', (#5360));
#5380 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#5390 = PERSON ('', '', $, $, $, $);
#5400 = ORGANIZATION ($, '', '');
#5410 = PERSON_AND_ORGANIZATION (#5390, #5400);
#5420 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#5410, #5380, (#5370));
#5430 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#5370));
#5440 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #5370, .NOT_KNOWN.);
#5450 = APPROVAL_STATUS ('approved');
#5460 = APPROVAL (#5450, '');
#5470 = CALENDAR_DATE (2010, 26, 4);
#5480 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#5490 = LOCAL_TIME (8, 29, 40., #5480);
#5500 = DATE_AND_TIME (#5470, #5490);
#5510 = APPROVAL_DATE_TIME (#5500, #5460);
#5520 = APPROVAL_ROLE ('');
#5530 = PERSON ('', '', $, $, $, $);
#5540 = ORGANIZATION ($, '', '');
#5550 = PERSON_AND_ORGANIZATION (#5530, #5540);
#5560 = APPROVAL_PERSON_ORGANIZATION (#5550, #5460, #5520);
#5570 = CC_DESIGN_APPROVAL (#5460, (#5440));
#5580 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#5590 = PERSON ('', '', $, $, $, $);
#5600 = ORGANIZATION ($, '', '');
#5610 = PERSON_AND_ORGANIZATION (#5590, #5600);
#5620 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#5610, #5580, (#5440));
#5630 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#5640 = PERSON ('', '', $, $, $, $);
#5650 = ORGANIZATION ($, '', '');
#5660 = PERSON_AND_ORGANIZATION (#5640, #5650);
#5670 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#5660, #5630, (#5440));
#5680 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#5690 = SECURITY_CLASSIFICATION ('', '', #5680);
#5700 = APPROVAL_STATUS ('approved');
#5710 = APPROVAL (#5700, '');
#5720 = CALENDAR_DATE (2010, 26, 4);
#5730 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#5740 = LOCAL_TIME (8, 29, 40., #5730);
#5750 = DATE_AND_TIME (#5720, #5740);
#5760 = APPROVAL_DATE_TIME (#5750, #5710);
#5770 = APPROVAL_ROLE ('');
#5780 = PERSON ('', '', $, $, $, $);
#5790 = ORGANIZATION ($, '', '');
#5800 = PERSON_AND_ORGANIZATION (#5780, #5790);
#5810 = APPROVAL_PERSON_ORGANIZATION (#5800, #5710, #5770);
#5820 = CC_DESIGN_APPROVAL (#5710, (#5690));
#5830 = DATE_TIME_ROLE ('classification_date');
#5840 = CALENDAR_DATE (2010, 26, 4);
#5850 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#5860 = LOCAL_TIME (8, 29, 40., #5850);
#5870 = DATE_AND_TIME (#5840, #5860);
#5880 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#5870, #5830, (#5690));
#5890 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#5900 = PERSON ('', '', $, $, $, $);
#5910 = ORGANIZATION ($, '', '');
#5920 = PERSON_AND_ORGANIZATION (#5900, #5910);
#5930 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#5920, #5890, (#5690));
#5940 = CC_DESIGN_SECURITY_CLASSIFICATION (#5690, (#5440));
#5950 = DESIGN_CONTEXT ('', #5340, 'design');
#5960 = PRODUCT_DEFINITION ('', '', #5440, #5950);
#5970 = APPROVAL_STATUS ('approved');
#5980 = APPROVAL (#5970, '');
#5990 = CALENDAR_DATE (2010, 26, 4);
#6000 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#6010 = LOCAL_TIME (8, 29, 40., #6000);
#6020 = DATE_AND_TIME (#5990, #6010);
#6030 = APPROVAL_DATE_TIME (#6020, #5980);
#6040 = APPROVAL_ROLE ('');
#6050 = PERSON ('', '', $, $, $, $);
#6060 = ORGANIZATION ($, '', '');
#6070 = PERSON_AND_ORGANIZATION (#6050, #6060);
#6080 = APPROVAL_PERSON_ORGANIZATION (#6070, #5980, #6040);
#6090 = CC_DESIGN_APPROVAL (#5980, (#5960));
#6100 = DATE_TIME_ROLE ('creation_date');
#6110 = CALENDAR_DATE (2010, 26, 4);
#6120 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#6130 = LOCAL_TIME (8, 29, 40., #6120);
#6140 = DATE_AND_TIME (#6110, #6130);
#6150 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#6140, #6100, (#5960));
#6160 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#6170 = PERSON ('', '', $, $, $, $);
#6180 = ORGANIZATION ($, '', '');
#6190 = PERSON_AND_ORGANIZATION (#6170, #6180);
#6200 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#6190, #6160, (#5960));
#6210 = PRODUCT_DEFINITION_SHAPE ('', '', #5960);
#6220 = SHAPE_DEFINITION_REPRESENTATION (#6210, #5330);
ENDSEC;
END-ISO-10303-21;