ISO-10303-21;
HEADER;
FILE_DESCRIPTION ((), '1');
FILE_NAME ('q:\\ahmed kadagan_c\\arno_sa\\rechte spiegeln\\SA35-3003L-M1 AP2240.stp', '2017-03-07T08:57:19', ('Unknown'), ('TDM'), 'HarmonyWare STEP v2.0.2.9', 'T3D tool generator', '');
FILE_SCHEMA (('CONFIG_CONTROL_DESIGN'));
ENDSEC;

DATA;
#10 = CARTESIAN_POINT ('', (-1.3269097223502, 1.25, -6.86870943090415));
#20 = VERTEX_POINT ('', #10);
#30 = CARTESIAN_POINT ('', (-33.2689505161499, 1.25, -6.86870943090415));
#40 = VERTEX_POINT ('', #30);
#50 = CARTESIAN_POINT ('', (-1.3269097223502, 1.25, -6.86870943090415));
#60 = CARTESIAN_POINT ('', (-33.2689505161499, 1.25, -6.86870943090415));
#70 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#50, #60), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#80 = EDGE_CURVE ('', #20, #40, #70, .T.);
#90 = ORIENTED_EDGE ('', *, *, #80, .T.);
#100 = CARTESIAN_POINT ('', (-34.2307365553686, 1.25, -2.16191498194662));
#110 = VERTEX_POINT ('', #100);
#120 = CARTESIAN_POINT ('', (-33.2689505161498, 1.25, -6.86870943090479));
#130 = CARTESIAN_POINT ('', (-33.7048624171716, 1.25, -4.78018159305621));
#140 = CARTESIAN_POINT ('', (-34.2307365553683, 1.25, -2.16191498194853));
#150 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#120, #130, #140), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (225.602102051616, 243.434000115499), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.987916761827595, 1.))
   REPRESENTATION_ITEM ('')
);
#160 = EDGE_CURVE ('', #40, #110, #150, .T.);
#170 = ORIENTED_EDGE ('', *, *, #160, .T.);
#180 = CARTESIAN_POINT ('', (-31.965, 1.25, -4.42765153731523));
#190 = VERTEX_POINT ('', #180);
#200 = CARTESIAN_POINT ('', (-34.2307365553686, 1.25, -2.16191498194662));
#210 = CARTESIAN_POINT ('', (-31.965, 1.25, -4.42765153731523));
#220 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#200, #210), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#230 = EDGE_CURVE ('', #110, #190, #220, .T.);
#240 = ORIENTED_EDGE ('', *, *, #230, .T.);
#250 = CARTESIAN_POINT ('', (-31.965, 1.25, -2.00605548681995E-14));
#260 = VERTEX_POINT ('', #250);
#270 = CARTESIAN_POINT ('', (-31.965, 1.25, -4.42765153731523));
#280 = CARTESIAN_POINT ('', (-31.965, 1.25, -2.00605548681995E-14));
#290 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#270, #280), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#300 = EDGE_CURVE ('', #190, #260, #290, .T.);
#310 = ORIENTED_EDGE ('', *, *, #300, .T.);
#320 = CARTESIAN_POINT ('', (-32.615, 1.25, -2.00605548681995E-14));
#330 = VERTEX_POINT ('', #320);
#340 = CARTESIAN_POINT ('', (-31.965, 1.25, -2.00605548681995E-14));
#350 = CARTESIAN_POINT ('', (-32.615, 1.25, -2.00605548681995E-14));
#360 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#340, #350), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#370 = EDGE_CURVE ('', #260, #330, #360, .T.);
#380 = ORIENTED_EDGE ('', *, *, #370, .T.);
#390 = CARTESIAN_POINT ('', (-32.1037094309041, 1.25, 0.51129056909586));
#400 = VERTEX_POINT ('', #390);
#410 = CARTESIAN_POINT ('', (-32.615, 1.25, -2.00605548681995E-14));
#420 = CARTESIAN_POINT ('', (-32.1037094309041, 1.25, 0.51129056909586));
#430 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#410, #420), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#440 = EDGE_CURVE ('', #330, #400, #430, .T.);
#450 = ORIENTED_EDGE ('', *, *, #440, .T.);
#460 = CARTESIAN_POINT ('', (-2.8262905690959, 1.25, 0.51129056909586));
#470 = VERTEX_POINT ('', #460);
#480 = CARTESIAN_POINT ('', (-32.1037094309041, 1.25, 0.51129056909586));
#490 = CARTESIAN_POINT ('', (-2.8262905690959, 1.25, 0.51129056909586));
#500 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#480, #490), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#510 = EDGE_CURVE ('', #400, #470, #500, .T.);
#520 = ORIENTED_EDGE ('', *, *, #510, .T.);
#530 = CARTESIAN_POINT ('', (-2.315, 1.25, -2.00605548681995E-14));
#540 = VERTEX_POINT ('', #530);
#550 = CARTESIAN_POINT ('', (-2.315, 1.25, -2.00605548681995E-14));
#560 = CARTESIAN_POINT ('', (-2.8262905690959, 1.25, 0.51129056909586));
#570 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#550, #560), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#580 = EDGE_CURVE ('', #540, #470, #570, .T.);
#590 = ORIENTED_EDGE ('', *, *, #580, .F.);
#600 = CARTESIAN_POINT ('', (-2.965, 1.25, -2.00605548681995E-14));
#610 = VERTEX_POINT ('', #600);
#620 = CARTESIAN_POINT ('', (-2.965, 1.25, -2.00605548681995E-14));
#630 = CARTESIAN_POINT ('', (-2.315, 1.25, -2.00605548681995E-14));
#640 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#620, #630), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#650 = EDGE_CURVE ('', #610, #540, #640, .T.);
#660 = ORIENTED_EDGE ('', *, *, #650, .F.);
#670 = CARTESIAN_POINT ('', (-2.965, 1.25, -4.42765153731523));
#680 = VERTEX_POINT ('', #670);
#690 = CARTESIAN_POINT ('', (-2.965, 1.25, -4.42765153731523));
#700 = CARTESIAN_POINT ('', (-2.965, 1.25, -2.00605548681995E-14));
#710 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#690, #700), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#720 = EDGE_CURVE ('', #680, #610, #710, .T.);
#730 = ORIENTED_EDGE ('', *, *, #720, .F.);
#740 = CARTESIAN_POINT ('', (-0.615000000000002, 1.25, -2.07765153731526));
#750 = VERTEX_POINT ('', #740);
#760 = CARTESIAN_POINT ('', (-0.615000000000002, 1.25, -2.07765153731526));
#770 = CARTESIAN_POINT ('', (-2.965, 1.25, -4.42765153731523));
#780 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#760, #770), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#790 = EDGE_CURVE ('', #750, #680, #780, .T.);
#800 = ORIENTED_EDGE ('', *, *, #790, .F.);
#810 = CARTESIAN_POINT ('', (-0.615000000000002, 1.25, -3.20625140977915));
#820 = VERTEX_POINT ('', #810);
#830 = CARTESIAN_POINT ('', (-0.615000000000002, 1.25, -3.20625140977915));
#840 = CARTESIAN_POINT ('', (-0.615000000000002, 1.25, -2.07765153731526));
#850 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#830, #840), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#860 = EDGE_CURVE ('', #820, #750, #850, .T.);
#870 = ORIENTED_EDGE ('', *, *, #860, .F.);
#880 = CARTESIAN_POINT ('', (-0.615000000000002, 1.25, -3.20625140977915));
#890 = CARTESIAN_POINT ('', (-1.3269097223502, 1.25, -6.86870943090415));
#900 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#880, #890), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#910 = EDGE_CURVE ('', #820, #20, #900, .T.);
#920 = ORIENTED_EDGE ('', *, *, #910, .T.);
#930 = EDGE_LOOP ('', (#90, #170, #240, #310, #380, #450, #520, #590, #660, #730, #800, #870, #920));
#940 = FACE_OUTER_BOUND ('', #930, .T.);
#950 = CARTESIAN_POINT ('', (-34.2317365553686, 1.25, 0.51229056909586));
#960 = CARTESIAN_POINT ('', (-34.2317365553686, 1.25, -6.86970943090479));
#970 = CARTESIAN_POINT ('', (-0.614000000000001, 1.25, 0.51229056909586));
#980 = CARTESIAN_POINT ('', (-0.614000000000001, 1.25, -6.86970943090479));
#990 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#950, #960), (#970, #980)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.649000000000001, 34.2667365553686), (-7.44435401270464, -0.0623540127039863), .UNSPECIFIED.);
#1000 = ADVANCED_FACE ('', (#940), #990, .T.);
#1010 = CARTESIAN_POINT ('', (-1.6610494838501, -1.25, -6.86870943090415));
#1020 = VERTEX_POINT ('', #1010);
#1030 = CARTESIAN_POINT ('', (-33.6030902776498, -1.25, -6.86870943090415));
#1040 = VERTEX_POINT ('', #1030);
#1050 = CARTESIAN_POINT ('', (-1.6610494838501, -1.25, -6.86870943090415));
#1060 = CARTESIAN_POINT ('', (-33.6030902776498, -1.25, -6.86870943090415));
#1070 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1050, #1060), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1080 = EDGE_CURVE ('', #1020, #1040, #1070, .T.);
#1090 = ORIENTED_EDGE ('', *, *, #1080, .F.);
#1100 = CARTESIAN_POINT ('', (-0.699263444631402, -1.25, -2.16191498194662));
#1110 = VERTEX_POINT ('', #1100);
#1120 = CARTESIAN_POINT ('', (-1.66104948385022, -1.25, -6.86870943090485));
#1130 = CARTESIAN_POINT ('', (-1.22513758282839, -1.25, -4.78018159305632));
#1140 = CARTESIAN_POINT ('', (-0.699263444631736, -1.25, -2.16191498194872));
#1150 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1120, #1130, #1140), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (225.602102051616, 243.434000115498), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.987916761827596, 1.))
   REPRESENTATION_ITEM ('')
);
#1160 = EDGE_CURVE ('', #1020, #1110, #1150, .T.);
#1170 = ORIENTED_EDGE ('', *, *, #1160, .T.);
#1180 = CARTESIAN_POINT ('', (-2.965, -1.25, -4.42765153731523));
#1190 = VERTEX_POINT ('', #1180);
#1200 = CARTESIAN_POINT ('', (-0.699263444631402, -1.25, -2.16191498194662));
#1210 = CARTESIAN_POINT ('', (-2.965, -1.25, -4.42765153731523));
#1220 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1200, #1210), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1230 = EDGE_CURVE ('', #1110, #1190, #1220, .T.);
#1240 = ORIENTED_EDGE ('', *, *, #1230, .T.);
#1250 = CARTESIAN_POINT ('', (-2.965, -1.25, -1.99074740183061E-14));
#1260 = VERTEX_POINT ('', #1250);
#1270 = CARTESIAN_POINT ('', (-2.965, -1.25, -4.42765153731523));
#1280 = CARTESIAN_POINT ('', (-2.965, -1.25, -1.99074740183061E-14));
#1290 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1270, #1280), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1300 = EDGE_CURVE ('', #1190, #1260, #1290, .T.);
#1310 = ORIENTED_EDGE ('', *, *, #1300, .T.);
#1320 = CARTESIAN_POINT ('', (-2.315, -1.25, -9.69342219175467E-15));
#1330 = VERTEX_POINT ('', #1320);
#1340 = CARTESIAN_POINT ('', (-2.965, -1.25, -1.99074740183061E-14));
#1350 = CARTESIAN_POINT ('', (-2.315, -1.25, -9.69342219175467E-15));
#1360 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1340, #1350), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1370 = EDGE_CURVE ('', #1260, #1330, #1360, .T.);
#1380 = ORIENTED_EDGE ('', *, *, #1370, .T.);
#1390 = CARTESIAN_POINT ('', (-2.8262905690959, -1.25, 0.51129056909586));
#1400 = VERTEX_POINT ('', #1390);
#1410 = CARTESIAN_POINT ('', (-2.8262905690959, -1.25, 0.51129056909586));
#1420 = CARTESIAN_POINT ('', (-2.315, -1.25, -9.69342219175467E-15));
#1430 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1410, #1420), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1440 = EDGE_CURVE ('', #1400, #1330, #1430, .T.);
#1450 = ORIENTED_EDGE ('', *, *, #1440, .F.);
#1460 = CARTESIAN_POINT ('', (-32.1037094309041, -1.25, 0.51129056909586));
#1470 = VERTEX_POINT ('', #1460);
#1480 = CARTESIAN_POINT ('', (-32.1037094309041, -1.25, 0.51129056909586));
#1490 = CARTESIAN_POINT ('', (-2.8262905690959, -1.25, 0.51129056909586));
#1500 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1480, #1490), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1510 = EDGE_CURVE ('', #1470, #1400, #1500, .T.);
#1520 = ORIENTED_EDGE ('', *, *, #1510, .F.);
#1530 = CARTESIAN_POINT ('', (-32.615, -1.25, -9.69342219175467E-15));
#1540 = VERTEX_POINT ('', #1530);
#1550 = CARTESIAN_POINT ('', (-32.1037094309041, -1.25, 0.51129056909586));
#1560 = CARTESIAN_POINT ('', (-32.615, -1.25, -9.69342219175467E-15));
#1570 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1550, #1560), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1580 = EDGE_CURVE ('', #1470, #1540, #1570, .T.);
#1590 = ORIENTED_EDGE ('', *, *, #1580, .T.);
#1600 = CARTESIAN_POINT ('', (-31.965, -1.25, -1.99074740183061E-14));
#1610 = VERTEX_POINT ('', #1600);
#1620 = CARTESIAN_POINT ('', (-31.965, -1.25, -1.99074740183061E-14));
#1630 = CARTESIAN_POINT ('', (-32.615, -1.25, -9.69342219175467E-15));
#1640 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1620, #1630), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1650 = EDGE_CURVE ('', #1610, #1540, #1640, .T.);
#1660 = ORIENTED_EDGE ('', *, *, #1650, .F.);
#1670 = CARTESIAN_POINT ('', (-31.965, -1.25, -4.42765153731523));
#1680 = VERTEX_POINT ('', #1670);
#1690 = CARTESIAN_POINT ('', (-31.965, -1.25, -4.42765153731523));
#1700 = CARTESIAN_POINT ('', (-31.965, -1.25, -1.99074740183061E-14));
#1710 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1690, #1700), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1720 = EDGE_CURVE ('', #1680, #1610, #1710, .T.);
#1730 = ORIENTED_EDGE ('', *, *, #1720, .F.);
#1740 = CARTESIAN_POINT ('', (-34.315, -1.25, -2.07765153731526));
#1750 = VERTEX_POINT ('', #1740);
#1760 = CARTESIAN_POINT ('', (-34.315, -1.25, -2.07765153731526));
#1770 = CARTESIAN_POINT ('', (-31.965, -1.25, -4.42765153731523));
#1780 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1760, #1770), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1790 = EDGE_CURVE ('', #1750, #1680, #1780, .T.);
#1800 = ORIENTED_EDGE ('', *, *, #1790, .F.);
#1810 = CARTESIAN_POINT ('', (-34.315, -1.25, -3.20625140977913));
#1820 = VERTEX_POINT ('', #1810);
#1830 = CARTESIAN_POINT ('', (-34.315, -1.25, -3.20625140977913));
#1840 = CARTESIAN_POINT ('', (-34.315, -1.25, -2.07765153731526));
#1850 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1830, #1840), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1860 = EDGE_CURVE ('', #1820, #1750, #1850, .T.);
#1870 = ORIENTED_EDGE ('', *, *, #1860, .F.);
#1880 = CARTESIAN_POINT ('', (-33.6030902776498, -1.25, -6.86870943090415));
#1890 = CARTESIAN_POINT ('', (-34.315, -1.25, -3.20625140977913));
#1900 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1880, #1890), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1910 = EDGE_CURVE ('', #1040, #1820, #1900, .T.);
#1920 = ORIENTED_EDGE ('', *, *, #1910, .F.);
#1930 = EDGE_LOOP ('', (#1090, #1170, #1240, #1310, #1380, #1450, #1520, #1590, #1660, #1730, #1800, #1870, #1920));
#1940 = FACE_OUTER_BOUND ('', #1930, .T.);
#1950 = CARTESIAN_POINT ('', (-0.698263444631401, -1.25, 0.51229056909586));
#1960 = CARTESIAN_POINT ('', (-0.698263444631401, -1.25, -6.86970943090485));
#1970 = CARTESIAN_POINT ('', (-34.316, -1.25, 0.51229056909586));
#1980 = CARTESIAN_POINT ('', (-34.316, -1.25, -6.86970943090485));
#1990 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1950, #1960), (#1970, #1980)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-34.351, -0.733263444631401), (-7.44435401270464, -0.0623540127039259), .UNSPECIFIED.);
#2000 = ADVANCED_FACE ('', (#1940), #1990, .T.);
#2010 = CARTESIAN_POINT ('', (-1.5754979398452, -1.07170426968103, -6.86870943090415));
#2020 = VERTEX_POINT ('', #2010);
#2030 = CARTESIAN_POINT ('', (-1.3269097223502, 1.25, -6.86870943090415));
#2040 = CARTESIAN_POINT ('', (-1.5754979398452, -1.07170426968103, -6.86870943090415));
#2050 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2030, #2040), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2060 = EDGE_CURVE ('', #20, #2020, #2050, .T.);
#2070 = ORIENTED_EDGE ('', *, *, #2060, .T.);
#2080 = CARTESIAN_POINT ('', (-1.57549793984512, -1.07170426968104, -6.86870943090415));
#2090 = CARTESIAN_POINT ('', (-1.58661945299766, -1.1755742955083, -6.86870943090415));
#2100 = CARTESIAN_POINT ('', (-1.66104948385009, -1.25000000000001, -6.86870943090415));
#2110 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2080, #2090, #2100), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (1.32332183074387, 39.7204714646065), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.94438455021935, 1.))
   REPRESENTATION_ITEM ('')
);
#2120 = EDGE_CURVE ('', #2020, #1020, #2110, .T.);
#2130 = ORIENTED_EDGE ('', *, *, #2120, .T.);
#2140 = ORIENTED_EDGE ('', *, *, #1080, .T.);
#2150 = CARTESIAN_POINT ('', (-33.3545020601548, 1.07170426968103, -6.86870943090415));
#2160 = VERTEX_POINT ('', #2150);
#2170 = CARTESIAN_POINT ('', (-33.3545020601548, 1.07170426968103, -6.86870943090415));
#2180 = CARTESIAN_POINT ('', (-33.6030902776498, -1.25, -6.86870943090415));
#2190 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2170, #2180), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2200 = EDGE_CURVE ('', #2160, #1040, #2190, .T.);
#2210 = ORIENTED_EDGE ('', *, *, #2200, .F.);
#2220 = CARTESIAN_POINT ('', (-33.3545020601549, 1.07170426968104, -6.86870943090415));
#2230 = CARTESIAN_POINT ('', (-33.3433805470023, 1.1755742955083, -6.86870943090415));
#2240 = CARTESIAN_POINT ('', (-33.2689505161499, 1.25000000000001, -6.86870943090415));
#2250 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2220, #2230, #2240), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (1.32332183074389, 39.7204714646067), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.944384550219349, 1.))
   REPRESENTATION_ITEM ('')
);
#2260 = EDGE_CURVE ('', #2160, #40, #2250, .T.);
#2270 = ORIENTED_EDGE ('', *, *, #2260, .T.);
#2280 = ORIENTED_EDGE ('', *, *, #80, .F.);
#2290 = EDGE_LOOP ('', (#2070, #2130, #2140, #2210, #2270, #2280));
#2300 = FACE_OUTER_BOUND ('', #2290, .T.);
#2310 = CARTESIAN_POINT ('', (-33.6040902776498, 1.25100000000001, -6.86870943090415));
#2320 = CARTESIAN_POINT ('', (-33.6040902776498, -1.25100000000001, -6.86870943090415));
#2330 = CARTESIAN_POINT ('', (-1.3259097223502, 1.25100000000001, -6.86870943090415));
#2340 = CARTESIAN_POINT ('', (-1.3259097223502, -1.25100000000001, -6.86870943090415));
#2350 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2310, #2320), (#2330, #2340)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-33.0880407495973, -0.809860194297698), (14.349, 16.851), .UNSPECIFIED.);
#2360 = ADVANCED_FACE ('', (#2300), #2350, .T.);
#2370 = CARTESIAN_POINT ('', (-34.9264524680039, -1.1399830590412, 6.98038302168506E-17));
#2380 = VERTEX_POINT ('', #2370);
#2390 = CARTESIAN_POINT ('', (-34.6778363141209, 1.18198212417821, -7.23755312512118E-17));
#2400 = VERTEX_POINT ('', #2390);
#2410 = CARTESIAN_POINT ('', (-34.9264524680039, -1.1399830590412, 6.98038302168506E-17));
#2420 = CARTESIAN_POINT ('', (-34.6778363141209, 1.18198212417821, -7.23755312512118E-17));
#2430 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2410, #2420), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2440 = EDGE_CURVE ('', #2380, #2400, #2430, .T.);
#2450 = ORIENTED_EDGE ('', *, *, #2440, .F.);
#2460 = CARTESIAN_POINT ('', (-34.9281276421366, -1.17135483562177, 2.73626005660587E-15));
#2470 = VERTEX_POINT ('', #2460);
#2480 = CARTESIAN_POINT ('', (-34.9264524680039, -1.13998305904119, 2.29024987946716E-15));
#2490 = CARTESIAN_POINT ('', (-34.9281276421366, -1.15562844632233, 2.29120788313993E-15));
#2500 = CARTESIAN_POINT ('', (-34.9281276421366, -1.17135483562177, 2.28544387354919E-15));
#2510 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2480, #2490, #2500), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (169.32484422624, 175.456963569193), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.988434278053052, 0.979686426581536))
   REPRESENTATION_ITEM ('')
);
#2520 = EDGE_CURVE ('', #2380, #2470, #2510, .T.);
#2530 = ORIENTED_EDGE ('', *, *, #2520, .T.);
#2540 = CARTESIAN_POINT ('', (-34.5974983808178, -1.46937486506815, 8.99732612626641E-17));
#2550 = VERTEX_POINT ('', #2540);
#2560 = CARTESIAN_POINT ('', (-34.9281276421366, -1.17135483562177, 2.28544387354919E-15));
#2570 = CARTESIAN_POINT ('', (-34.9281276421366, -1.29360532992791, 2.24063682927245E-15));
#2580 = CARTESIAN_POINT ('', (-34.8410732753358, -1.38077553458571, 1.86090495633882E-15));
#2590 = CARTESIAN_POINT ('', (-34.7406760636397, -1.48130633863663, 5.34793063158464E-16));
#2600 = CARTESIAN_POINT ('', (-34.5974983808178, -1.46937486506814, 8.99732612626639E-17));
#2610 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2560, #2570, #2580, #2590, #2600), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (175.456963569193, 219.662422113118, 269.999999999996), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.979686426581536, 0.916624577334118, 1., 0.905058855387169, 1.))
   REPRESENTATION_ITEM ('')
);
#2620 = EDGE_CURVE ('', #2470, #2550, #2610, .T.);
#2630 = ORIENTED_EDGE ('', *, *, #2620, .T.);
#2640 = CARTESIAN_POINT ('', (-34.5974983808178, -1.46937486506815, 8.99732612626641E-17));
#2650 = CARTESIAN_POINT ('', (-31.965, -1.25, -1.99074740183061E-14));
#2660 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2640, #2650), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2670 = EDGE_CURVE ('', #2550, #1610, #2660, .T.);
#2680 = ORIENTED_EDGE ('', *, *, #2670, .T.);
#2690 = ORIENTED_EDGE ('', *, *, #1650, .T.);
#2700 = CARTESIAN_POINT ('', (-32.615, -1.25, -9.69342219175467E-15));
#2710 = CARTESIAN_POINT ('', (-32.615, 1.25, -2.00605548681995E-14));
#2720 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2700, #2710), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2730 = EDGE_CURVE ('', #1540, #330, #2720, .T.);
#2740 = ORIENTED_EDGE ('', *, *, #2730, .T.);
#2750 = ORIENTED_EDGE ('', *, *, #370, .F.);
#2760 = CARTESIAN_POINT ('', (-34.3490797162863, 1.44867330969052, -8.87056565861349E-17));
#2770 = VERTEX_POINT ('', #2760);
#2780 = CARTESIAN_POINT ('', (-34.3490797162863, 1.44867330969052, -8.87056565861349E-17));
#2790 = CARTESIAN_POINT ('', (-31.965, 1.25, -2.00605548681995E-14));
#2800 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2780, #2790), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2810 = EDGE_CURVE ('', #2770, #260, #2800, .T.);
#2820 = ORIENTED_EDGE ('', *, *, #2810, .F.);
#2830 = CARTESIAN_POINT ('', (-34.3490797162863, 1.44867330969053, -9.85866827328751E-15));
#2840 = CARTESIAN_POINT ('', (-34.6466264090215, 1.47346886741844, -7.63974051405743E-15));
#2850 = CARTESIAN_POINT ('', (-34.6778363141209, 1.18198212417821, -7.62189209870228E-15));
#2860 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2830, #2840, #2850), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (270.000000000004, 358.676678169256), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.715225233631764, 1.))
   REPRESENTATION_ITEM ('')
);
#2870 = EDGE_CURVE ('', #2770, #2400, #2860, .T.);
#2880 = ORIENTED_EDGE ('', *, *, #2870, .T.);
#2890 = EDGE_LOOP ('', (#2450, #2530, #2630, #2680, #2690, #2740, #2750, #2820, #2880));
#2900 = FACE_OUTER_BOUND ('', #2890, .T.);
#2910 = CARTESIAN_POINT ('', (-34.942470487032, -1.48230633863663, 9.07650856483589E-17));
#2920 = CARTESIAN_POINT ('', (-34.942470487032, 1.47446886741844, -9.02851789463209E-17));
#2930 = CARTESIAN_POINT ('', (-31.964, -1.48230633863663, -2.07814277773046E-14));
#2940 = CARTESIAN_POINT ('', (-31.964, 1.47446886741844, -2.09624780418993E-14));
#2950 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2910, #2920), (#2930, #2940)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-3.001, -0.0225295129680489), (2.89417691902182, 5.85095212507689), .UNSPECIFIED.);
#2960 = ADVANCED_FACE ('', (#2900), #2950, .T.);
#2970 = ORIENTED_EDGE ('', *, *, #230, .F.);
#2980 = CARTESIAN_POINT ('', (-33.8614069250108, 1.40803391041756, -2.53124461230449));
#2990 = VERTEX_POINT ('', #2980);
#3000 = CARTESIAN_POINT ('', (-34.2307365553686, 1.25, -2.16191498194662));
#3010 = CARTESIAN_POINT ('', (-34.1163415621067, 1.42927846350888, -2.27630997520854));
#3020 = CARTESIAN_POINT ('', (-33.8614069250108, 1.40803391041757, -2.53124461230445));
#3030 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#3000, #3010, #3020), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (25.9546499597439, 94.0660765590195), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.828493432419429, 1.))
   REPRESENTATION_ITEM ('')
);
#3040 = EDGE_CURVE ('', #110, #2990, #3030, .T.);
#3050 = ORIENTED_EDGE ('', *, *, #3040, .T.);
#3060 = CARTESIAN_POINT ('', (-31.965, 1.25, -4.42765153731523));
#3070 = CARTESIAN_POINT ('', (-33.8614069250108, 1.40803391041756, -2.53124461230449));
#3080 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3060, #3070), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3090 = EDGE_CURVE ('', #190, #2990, #3080, .T.);
#3100 = ORIENTED_EDGE ('', *, *, #3090, .F.);
#3110 = EDGE_LOOP ('', (#2970, #3050, #3100));
#3120 = FACE_OUTER_BOUND ('', #3110, .T.);
#3130 = CARTESIAN_POINT ('', (-31.964, 1.249, -4.42865153731523));
#3140 = CARTESIAN_POINT ('', (-31.964, 1.43027846350888, -4.42865153731523));
#3150 = CARTESIAN_POINT ('', (-34.2317365553686, 1.249, -2.16091498194664));
#3160 = CARTESIAN_POINT ('', (-34.2317365553686, 1.43027846350888, -2.16091498194664));
#3170 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3130, #3140), (#3150, #3160)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.117752292647596, 3.32481608513912), (34.999, 35.1802784635089), .UNSPECIFIED.);
#3180 = ADVANCED_FACE ('', (#3120), #3170, .T.);
#3190 = CARTESIAN_POINT ('', (-34.159512051708, -1.432876004309, -2.2331394856072));
#3200 = VERTEX_POINT ('', #3190);
#3210 = CARTESIAN_POINT ('', (-31.965, -1.25, -4.42765153731523));
#3220 = CARTESIAN_POINT ('', (-34.159512051708, -1.432876004309, -2.2331394856072));
#3230 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3210, #3220), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3240 = EDGE_CURVE ('', #1680, #3200, #3230, .T.);
#3250 = ORIENTED_EDGE ('', *, *, #3240, .T.);
#3260 = CARTESIAN_POINT ('', (-34.5708091356787, -1.14157829341694, -1.82184240163652));
#3270 = VERTEX_POINT ('', #3260);
#3280 = CARTESIAN_POINT ('', (-34.159512051708, -1.432876004309, -2.23313948560722));
#3290 = CARTESIAN_POINT ('', (-34.3376226133668, -1.44771855111391, -2.05502892394842));
#3300 = CARTESIAN_POINT ('', (-34.4625150086881, -1.34922901236509, -1.93013652862715));
#3310 = CARTESIAN_POINT ('', (-34.5708091356787, -1.2638287877231, -1.82184240163652));
#3320 = CARTESIAN_POINT ('', (-34.5708091356787, -1.14157829341694, -1.82184240163652));
#3330 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#3280, #3290, #3300, #3310, #3320), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (85.9431006022158, 136.280678489096, 180.486137033025), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.90505885538716, 1., 0.916624577334106, 0.979686426581539))
   REPRESENTATION_ITEM ('')
);
#3340 = EDGE_CURVE ('', #3200, #3270, #3330, .T.);
#3350 = ORIENTED_EDGE ('', *, *, #3340, .T.);
#3360 = CARTESIAN_POINT ('', (-34.5687252480242, -1.11017245737622, -1.82392628929109));
#3370 = VERTEX_POINT ('', #3360);
#3380 = CARTESIAN_POINT ('', (-34.5708091356787, -1.14157829341694, -1.82184240163652));
#3390 = CARTESIAN_POINT ('', (-34.5708091356787, -1.12585190411752, -1.82184240163652));
#3400 = CARTESIAN_POINT ('', (-34.5687252480241, -1.11017245737622, -1.8239262892911));
#3410 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#3380, #3390, #3400), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (180.486137033025, 186.618256375977), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.979686426581539, 0.988434278053054, 1.))
   REPRESENTATION_ITEM ('')
);
#3420 = EDGE_CURVE ('', #3270, #3370, #3410, .T.);
#3430 = ORIENTED_EDGE ('', *, *, #3420, .T.);
#3440 = CARTESIAN_POINT ('', (-34.315, 0.79888991678194, -2.07765153731526));
#3450 = VERTEX_POINT ('', #3440);
#3460 = CARTESIAN_POINT ('', (-34.315, 0.79888991678194, -2.07765153731526));
#3470 = CARTESIAN_POINT ('', (-34.5687252480242, -1.11017245737622, -1.82392628929109));
#3480 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3460, #3470), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3490 = EDGE_CURVE ('', #3450, #3370, #3480, .T.);
#3500 = ORIENTED_EDGE ('', *, *, #3490, .F.);
#3510 = CARTESIAN_POINT ('', (-34.315, -1.25, -2.07765153731526));
#3520 = CARTESIAN_POINT ('', (-34.315, 0.79888991678194, -2.07765153731526));
#3530 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3510, #3520), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3540 = EDGE_CURVE ('', #1750, #3450, #3530, .T.);
#3550 = ORIENTED_EDGE ('', *, *, #3540, .F.);
#3560 = ORIENTED_EDGE ('', *, *, #1790, .T.);
#3570 = EDGE_LOOP ('', (#3250, #3350, #3430, #3500, #3550, #3560));
#3580 = FACE_OUTER_BOUND ('', #3570, .T.);
#3590 = CARTESIAN_POINT ('', (-31.964, -1.44871855111391, -4.42865153731523));
#3600 = CARTESIAN_POINT ('', (-31.964, 0.799889916781937, -4.42865153731523));
#3610 = CARTESIAN_POINT ('', (-34.5884074040094, -1.4487185511139, -1.8042441333059));
#3620 = CARTESIAN_POINT ('', (-34.5884074040094, 0.799889916781937, -1.8042441333059));
#3630 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3590, #3600), (#3610, #3620)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.386656458803266, 3.32481608513912), (32.3012814488861, 34.5498899167819), .UNSPECIFIED.);
#3640 = ADVANCED_FACE ('', (#3580), #3630, .T.);
#3650 = CARTESIAN_POINT ('', (-34.315, -1.25, -3.20625140977913));
#3660 = CARTESIAN_POINT ('', (-34.315, 0.798889916781941, -2.07765153731526));
#3670 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3650, #3660), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3680 = EDGE_CURVE ('', #1820, #3450, #3670, .T.);
#3690 = ORIENTED_EDGE ('', *, *, #3680, .F.);
#3700 = ORIENTED_EDGE ('', *, *, #1860, .T.);
#3710 = ORIENTED_EDGE ('', *, *, #3540, .T.);
#3720 = EDGE_LOOP ('', (#3690, #3700, #3710));
#3730 = FACE_OUTER_BOUND ('', #3720, .T.);
#3740 = CARTESIAN_POINT ('', (-34.315, 0.799889916781937, -3.20725140977913));
#3750 = CARTESIAN_POINT ('', (-34.315, 0.799889916781937, -2.07665153731526));
#3760 = CARTESIAN_POINT ('', (-34.315, -1.251, -3.20725140977913));
#3770 = CARTESIAN_POINT ('', (-34.315, -1.251, -2.07665153731526));
#3780 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3740, #3750), (#3760, #3770)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (32.499, 34.5498899167819), (3.87040012753613, 5.001), .UNSPECIFIED.);
#3790 = ADVANCED_FACE ('', (#3730), #3780, .T.);
#3800 = ORIENTED_EDGE ('', *, *, #3090, .T.);
#3810 = CARTESIAN_POINT ('', (-33.8614069250108, 1.40803391041756, -2.53124461230449));
#3820 = CARTESIAN_POINT ('', (-34.3490797162863, 1.44867330969052, 3.55383553263928E-16));
#3830 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3810, #3820), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3840 = EDGE_CURVE ('', #2990, #2770, #3830, .T.);
#3850 = ORIENTED_EDGE ('', *, *, #3840, .T.);
#3860 = ORIENTED_EDGE ('', *, *, #2810, .T.);
#3870 = ORIENTED_EDGE ('', *, *, #300, .F.);
#3880 = EDGE_LOOP ('', (#3800, #3850, #3860, #3870));
#3890 = FACE_OUTER_BOUND ('', #3880, .T.);
#3900 = CARTESIAN_POINT ('', (-31.963924137931, 1.24991034482758, -4.42865153731523));
#3910 = CARTESIAN_POINT ('', (-31.963924137931, 1.24991034482758, 0.000999999999999813));
#3920 = CARTESIAN_POINT ('', (-34.3501555783553, 1.44876296486293, -4.42865153731523));
#3930 = CARTESIAN_POINT ('', (-34.3501555783553, 1.44876296486294, 0.000999999999999801));
#3940 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3900, #3910), (#3920, #3930)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-3.01147823593627, -0.616975604539924), (2.13287261808979, 6.56252415540502), .UNSPECIFIED.);
#3950 = ADVANCED_FACE ('', (#3890), #3940, .T.);
#3960 = ORIENTED_EDGE ('', *, *, #2670, .F.);
#3970 = CARTESIAN_POINT ('', (-34.5974983808178, -1.46937486506815, 8.99732612626641E-17));
#3980 = CARTESIAN_POINT ('', (-34.159512051708, -1.432876004309, -2.2331394856072));
#3990 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3970, #3980), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4000 = EDGE_CURVE ('', #2550, #3200, #3990, .T.);
#4010 = ORIENTED_EDGE ('', *, *, #4000, .T.);
#4020 = ORIENTED_EDGE ('', *, *, #3240, .F.);
#4030 = ORIENTED_EDGE ('', *, *, #1720, .T.);
#4040 = EDGE_LOOP ('', (#3960, #4010, #4020, #4030));
#4050 = FACE_OUTER_BOUND ('', #4040, .T.);
#4060 = CARTESIAN_POINT ('', (-34.5985742428868, -1.46946452024056, -4.42865153731523));
#4070 = CARTESIAN_POINT ('', (-34.5985742428868, -1.46946452024056, 0.00099999999999998));
#4080 = CARTESIAN_POINT ('', (-31.963924137931, -1.24991034482758, -4.42865153731523));
#4090 = CARTESIAN_POINT ('', (-31.963924137931, -1.24991034482758, 0.000999999999999966));
#4100 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4060, #4070), (#4080, #4090)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-3.01147823593627, -0.367695867532149), (2.13287261808979, 6.56252415540502), .UNSPECIFIED.);
#4110 = ADVANCED_FACE ('', (#4050), #4100, .T.);
#4120 = CARTESIAN_POINT ('', (-0.770487948291901, 1.432876004309, -2.2331394856072));
#4130 = VERTEX_POINT ('', #4120);
#4140 = CARTESIAN_POINT ('', (-2.965, 1.25, -4.42765153731523));
#4150 = CARTESIAN_POINT ('', (-0.770487948291901, 1.432876004309, -2.2331394856072));
#4160 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4140, #4150), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4170 = EDGE_CURVE ('', #680, #4130, #4160, .T.);
#4180 = ORIENTED_EDGE ('', *, *, #4170, .T.);
#4190 = CARTESIAN_POINT ('', (-0.361274751975799, 1.11017245737622, -1.82392628929109));
#4200 = VERTEX_POINT ('', #4190);
#4210 = CARTESIAN_POINT ('', (-0.77048794829194, 1.432876004309, -2.23313948560716));
#4220 = CARTESIAN_POINT ('', (-0.592377386633153, 1.44771855111389, -2.05502892394837));
#4230 = CARTESIAN_POINT ('', (-0.467484991311903, 1.34922901236507, -1.93013652862712));
#4240 = CARTESIAN_POINT ('', (-0.342592595990649, 1.25073947361626, -1.80524413330587));
#4250 = CARTESIAN_POINT ('', (-0.361274751975866, 1.11017245737622, -1.82392628929109));
#4260 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#4210, #4220, #4230, #4240, #4250), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (85.9431006022235, 136.2806784891, 186.618256375977), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.905058855387174, 1., 0.905058855387174, 1.))
   REPRESENTATION_ITEM ('')
);
#4270 = EDGE_CURVE ('', #4130, #4200, #4260, .T.);
#4280 = ORIENTED_EDGE ('', *, *, #4270, .T.);
#4290 = CARTESIAN_POINT ('', (-0.615000000000002, -0.798889916781982, -2.07765153731526));
#4300 = VERTEX_POINT ('', #4290);
#4310 = CARTESIAN_POINT ('', (-0.361274751975799, 1.11017245737622, -1.82392628929109));
#4320 = CARTESIAN_POINT ('', (-0.615000000000002, -0.798889916781982, -2.07765153731526));
#4330 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4310, #4320), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4340 = EDGE_CURVE ('', #4200, #4300, #4330, .T.);
#4350 = ORIENTED_EDGE ('', *, *, #4340, .T.);
#4360 = CARTESIAN_POINT ('', (-0.615000000000002, -0.798889916781982, -2.07765153731526));
#4370 = CARTESIAN_POINT ('', (-0.615000000000002, 1.25, -2.07765153731526));
#4380 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4360, #4370), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4390 = EDGE_CURVE ('', #4300, #750, #4380, .T.);
#4400 = ORIENTED_EDGE ('', *, *, #4390, .T.);
#4410 = ORIENTED_EDGE ('', *, *, #790, .T.);
#4420 = EDGE_LOOP ('', (#4180, #4280, #4350, #4400, #4410));
#4430 = FACE_OUTER_BOUND ('', #4420, .T.);
#4440 = CARTESIAN_POINT ('', (-2.966, 1.44871855111389, -4.42865153731523));
#4450 = CARTESIAN_POINT ('', (-2.966, -0.79988991678198, -4.42865153731523));
#4460 = CARTESIAN_POINT ('', (-0.34159259599063, 1.44871855111389, -1.80424413330589));
#4470 = CARTESIAN_POINT ('', (-0.34159259599063, -0.79988991678198, -1.80424413330589));
#4480 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4440, #4450), (#4460, #4470)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.386656458803271, 3.32481608513912), (-35.1987185511139, -32.950110083218), .UNSPECIFIED.);
#4490 = ADVANCED_FACE ('', (#4430), #4480, .T.);
#4500 = ORIENTED_EDGE ('', *, *, #510, .F.);
#4510 = CARTESIAN_POINT ('', (-32.1037094309041, 1.25, 0.51129056909586));
#4520 = CARTESIAN_POINT ('', (-32.1037094309041, -1.25, 0.51129056909586));
#4530 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4510, #4520), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4540 = EDGE_CURVE ('', #400, #1470, #4530, .T.);
#4550 = ORIENTED_EDGE ('', *, *, #4540, .T.);
#4560 = ORIENTED_EDGE ('', *, *, #1510, .T.);
#4570 = CARTESIAN_POINT ('', (-2.8262905690959, 1.25, 0.51129056909586));
#4580 = CARTESIAN_POINT ('', (-2.8262905690959, -1.25, 0.51129056909586));
#4590 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4570, #4580), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4600 = EDGE_CURVE ('', #470, #1400, #4590, .T.);
#4610 = ORIENTED_EDGE ('', *, *, #4600, .F.);
#4620 = EDGE_LOOP ('', (#4500, #4550, #4560, #4610));
#4630 = FACE_OUTER_BOUND ('', #4620, .T.);
#4640 = CARTESIAN_POINT ('', (-2.8252905690959, 1.251, 0.51129056909586));
#4650 = CARTESIAN_POINT ('', (-2.8252905690959, -1.251, 0.51129056909586));
#4660 = CARTESIAN_POINT ('', (-32.1047094309041, 1.251, 0.51129056909586));
#4670 = CARTESIAN_POINT ('', (-32.1047094309041, -1.251, 0.51129056909586));
#4680 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4640, #4650), (#4660, #4670)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (2.5366702673959, 31.8160891292041), (14.349, 16.851), .UNSPECIFIED.);
#4690 = ADVANCED_FACE ('', (#4630), #4680, .T.);
#4700 = ORIENTED_EDGE ('', *, *, #580, .T.);
#4710 = ORIENTED_EDGE ('', *, *, #4600, .T.);
#4720 = ORIENTED_EDGE ('', *, *, #1440, .T.);
#4730 = CARTESIAN_POINT ('', (-2.315, -1.25, -9.69342219175467E-15));
#4740 = CARTESIAN_POINT ('', (-2.315, 1.25, -2.00605548681995E-14));
#4750 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4730, #4740), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4760 = EDGE_CURVE ('', #1330, #540, #4750, .T.);
#4770 = ORIENTED_EDGE ('', *, *, #4760, .T.);
#4780 = EDGE_LOOP ('', (#4700, #4710, #4720, #4770));
#4790 = FACE_OUTER_BOUND ('', #4780, .T.);
#4800 = CARTESIAN_POINT ('', (-2.314, 1.251, -0.00100000000002039));
#4810 = CARTESIAN_POINT ('', (-2.314, -1.251, -0.00100000000002024));
#4820 = CARTESIAN_POINT ('', (-2.8272905690959, 1.251, 0.512290569095867));
#4830 = CARTESIAN_POINT ('', (-2.8272905690959, -1.251, 0.512290569095867));
#4840 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4800, #4810), (#4820, #4830)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.724488270691238, 0.00141421356237359), (-5.62748325765845, -3.12548325765845), .UNSPECIFIED.);
#4850 = ADVANCED_FACE ('', (#4790), #4840, .T.);
#4860 = CARTESIAN_POINT ('', (-0.252163685879101, -1.18198212417821, 7.23755312512118E-17));
#4870 = VERTEX_POINT ('', #4860);
#4880 = CARTESIAN_POINT ('', (-0.00354753199610158, 1.13998305904121, -6.98038302168512E-17));
#4890 = VERTEX_POINT ('', #4880);
#4900 = CARTESIAN_POINT ('', (-0.252163685879101, -1.18198212417821, 7.23755312512118E-17));
#4910 = CARTESIAN_POINT ('', (-0.00354753199610158, 1.13998305904121, -6.98038302168512E-17));
#4920 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4900, #4910), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4930 = EDGE_CURVE ('', #4870, #4890, #4920, .T.);
#4940 = ORIENTED_EDGE ('', *, *, #4930, .T.);
#4950 = CARTESIAN_POINT ('', (-0.332501619182199, 1.46937486506815, -8.99732612626641E-17));
#4960 = VERTEX_POINT ('', #4950);
#4970 = CARTESIAN_POINT ('', (-0.0035475319960554, 1.1399830590412, 2.15064221903346E-15));
#4980 = CARTESIAN_POINT ('', (0.0114704870319464, 1.28024473053481, 2.14205366868158E-15));
#4990 = CARTESIAN_POINT ('', (-0.0889267246641765, 1.38077553458572, 1.69180872246168E-15));
#5000 = CARTESIAN_POINT ('', (-0.189323936360303, 1.48130633863663, 3.53385356541661E-16));
#5010 = CARTESIAN_POINT ('', (-0.332501619182199, 1.46937486506814, -8.99732612626639E-17));
#5020 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#4970, #4980, #4990, #5000, #5010), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (169.324844226241, 219.662422113119, 269.999999999996), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.905058855387173, 1., 0.905058855387173, 1.))
   REPRESENTATION_ITEM ('')
);
#5030 = EDGE_CURVE ('', #4890, #4960, #5020, .T.);
#5040 = ORIENTED_EDGE ('', *, *, #5030, .T.);
#5050 = CARTESIAN_POINT ('', (-0.332501619182199, 1.46937486506815, -8.99732612626641E-17));
#5060 = CARTESIAN_POINT ('', (-2.965, 1.25, -2.00605548681995E-14));
#5070 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5050, #5060), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5080 = EDGE_CURVE ('', #4960, #610, #5070, .T.);
#5090 = ORIENTED_EDGE ('', *, *, #5080, .T.);
#5100 = ORIENTED_EDGE ('', *, *, #650, .T.);
#5110 = ORIENTED_EDGE ('', *, *, #4760, .F.);
#5120 = ORIENTED_EDGE ('', *, *, #1370, .F.);
#5130 = CARTESIAN_POINT ('', (-0.580920283713702, -1.44867330969052, 8.87056565861349E-17));
#5140 = VERTEX_POINT ('', #5130);
#5150 = CARTESIAN_POINT ('', (-0.580920283713702, -1.44867330969052, 8.87056565861349E-17));
#5160 = CARTESIAN_POINT ('', (-2.965, -1.25, -1.99074740183061E-14));
#5170 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5150, #5160), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5180 = EDGE_CURVE ('', #5140, #1260, #5170, .T.);
#5190 = ORIENTED_EDGE ('', *, *, #5180, .F.);
#5200 = CARTESIAN_POINT ('', (-0.580920283713702, -1.44867330969053, -9.68125696011524E-15));
#5210 = CARTESIAN_POINT ('', (-0.283373590978474, -1.47346886741844, -7.01520341099464E-15));
#5220 = CARTESIAN_POINT ('', (-0.252163685879122, -1.18198212417821, -7.47714103619985E-15));
#5230 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5200, #5210, #5220), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (270.000000000004, 358.676678169256), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.715225233631763, 1.))
   REPRESENTATION_ITEM ('')
);
#5240 = EDGE_CURVE ('', #5140, #4870, #5230, .T.);
#5250 = ORIENTED_EDGE ('', *, *, #5240, .T.);
#5260 = EDGE_LOOP ('', (#4940, #5040, #5090, #5100, #5110, #5120, #5190, #5250));
#5270 = FACE_OUTER_BOUND ('', #5260, .T.);
#5280 = CARTESIAN_POINT ('', (0.0124704870319476, 1.48230633863663, -9.07650856483589E-17));
#5290 = CARTESIAN_POINT ('', (0.0124704870319476, -1.47446886741844, 9.02851789463209E-17));
#5300 = CARTESIAN_POINT ('', (-2.966, 1.48230633863663, -2.09629579486013E-14));
#5310 = CARTESIAN_POINT ('', (-2.966, -1.47446886741844, -2.07819076840066E-14));
#5320 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5280, #5290), (#5300, #5310)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-3.001, -0.0225295129680525), (-5.85878959629508, -2.90201439024001), .UNSPECIFIED.);
#5330 = ADVANCED_FACE ('', (#5270), #5320, .T.);
#5340 = ORIENTED_EDGE ('', *, *, #1230, .F.);
#5350 = CARTESIAN_POINT ('', (-1.0685930749892, -1.40803391041756, -2.53124461230448));
#5360 = VERTEX_POINT ('', #5350);
#5370 = CARTESIAN_POINT ('', (-0.699263444631409, -1.25, -2.16191498194661));
#5380 = CARTESIAN_POINT ('', (-0.813658437893331, -1.42927846350888, -2.27630997520853));
#5390 = CARTESIAN_POINT ('', (-1.06859307498924, -1.40803391041757, -2.53124461230444));
#5400 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5370, #5380, #5390), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (25.9546499597441, 94.0660765590195), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.82849343241943, 1.))
   REPRESENTATION_ITEM ('')
);
#5410 = EDGE_CURVE ('', #1110, #5360, #5400, .T.);
#5420 = ORIENTED_EDGE ('', *, *, #5410, .T.);
#5430 = CARTESIAN_POINT ('', (-2.965, -1.25, -4.42765153731523));
#5440 = CARTESIAN_POINT ('', (-1.0685930749892, -1.40803391041756, -2.53124461230448));
#5450 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5430, #5440), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5460 = EDGE_CURVE ('', #1190, #5360, #5450, .T.);
#5470 = ORIENTED_EDGE ('', *, *, #5460, .F.);
#5480 = EDGE_LOOP ('', (#5340, #5420, #5470));
#5490 = FACE_OUTER_BOUND ('', #5480, .T.);
#5500 = CARTESIAN_POINT ('', (-2.966, -1.249, -4.42865153731523));
#5510 = CARTESIAN_POINT ('', (-2.966, -1.43027846350888, -4.42865153731523));
#5520 = CARTESIAN_POINT ('', (-0.698263444631383, -1.249, -2.16091498194664));
#5530 = CARTESIAN_POINT ('', (-0.698263444631383, -1.43027846350888, -2.16091498194664));
#5540 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5500, #5510), (#5520, #5530)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.117752292647593, 3.32481608513912), (-32.501, -32.3197215364911), .UNSPECIFIED.);
#5550 = ADVANCED_FACE ('', (#5490), #5540, .T.);
#5560 = ORIENTED_EDGE ('', *, *, #4390, .F.);
#5570 = CARTESIAN_POINT ('', (-0.615000000000002, -0.798889916781982, -2.07765153731526));
#5580 = CARTESIAN_POINT ('', (-0.615000000000002, 1.25, -3.20625140977915));
#5590 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5570, #5580), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5600 = EDGE_CURVE ('', #4300, #820, #5590, .T.);
#5610 = ORIENTED_EDGE ('', *, *, #5600, .T.);
#5620 = ORIENTED_EDGE ('', *, *, #860, .T.);
#5630 = EDGE_LOOP ('', (#5560, #5610, #5620));
#5640 = FACE_OUTER_BOUND ('', #5630, .T.);
#5650 = CARTESIAN_POINT ('', (-0.615000000000002, 1.251, -2.07665153731526));
#5660 = CARTESIAN_POINT ('', (-0.615000000000002, 1.251, -3.20725140977915));
#5670 = CARTESIAN_POINT ('', (-0.615000000000002, -0.79988991678198, -2.07665153731526));
#5680 = CARTESIAN_POINT ('', (-0.615000000000002, -0.79988991678198, -3.20725140977915));
#5690 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5650, #5660), (#5670, #5680)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (32.950110083218, 35.001), (-5.001, -3.87040012753611), .UNSPECIFIED.);
#5700 = ADVANCED_FACE ('', (#5640), #5690, .T.);
#5710 = ORIENTED_EDGE ('', *, *, #5080, .F.);
#5720 = CARTESIAN_POINT ('', (-0.332501619182199, 1.46937486506815, -8.99732612626641E-17));
#5730 = CARTESIAN_POINT ('', (-0.770487948291901, 1.432876004309, -2.2331394856072));
#5740 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5720, #5730), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5750 = EDGE_CURVE ('', #4960, #4130, #5740, .T.);
#5760 = ORIENTED_EDGE ('', *, *, #5750, .T.);
#5770 = ORIENTED_EDGE ('', *, *, #4170, .F.);
#5780 = ORIENTED_EDGE ('', *, *, #720, .T.);
#5790 = EDGE_LOOP ('', (#5710, #5760, #5770, #5780));
#5800 = FACE_OUTER_BOUND ('', #5790, .T.);
#5810 = CARTESIAN_POINT ('', (-2.96607586206897, 1.24991034482758, 0.00100000000000026));
#5820 = CARTESIAN_POINT ('', (-2.96607586206897, 1.24991034482758, -4.42865153731523));
#5830 = CARTESIAN_POINT ('', (-0.331425757113234, 1.46946452024056, 0.00100000000000024));
#5840 = CARTESIAN_POINT ('', (-0.331425757113234, 1.46946452024056, -4.42865153731523));
#5850 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5810, #5820), (#5830, #5840)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-3.01147823593627, -0.367695867532149), (-6.56252415540502, -2.13287261808979), .UNSPECIFIED.);
#5860 = ADVANCED_FACE ('', (#5800), #5850, .T.);
#5870 = ORIENTED_EDGE ('', *, *, #5460, .T.);
#5880 = CARTESIAN_POINT ('', (-1.0685930749892, -1.40803391041756, -2.53124461230448));
#5890 = CARTESIAN_POINT ('', (-0.580920283713702, -1.44867330969052, -3.55383553263928E-16));
#5900 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5880, #5890), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5910 = EDGE_CURVE ('', #5360, #5140, #5900, .T.);
#5920 = ORIENTED_EDGE ('', *, *, #5910, .T.);
#5930 = ORIENTED_EDGE ('', *, *, #5180, .T.);
#5940 = ORIENTED_EDGE ('', *, *, #1300, .F.);
#5950 = EDGE_LOOP ('', (#5870, #5920, #5930, #5940));
#5960 = FACE_OUTER_BOUND ('', #5950, .T.);
#5970 = CARTESIAN_POINT ('', (-0.579844421644736, -1.44876296486294, 0.00100000000000042));
#5980 = CARTESIAN_POINT ('', (-0.579844421644736, -1.44876296486293, -4.42865153731523));
#5990 = CARTESIAN_POINT ('', (-2.96607586206897, -1.24991034482758, 0.00100000000000041));
#6000 = CARTESIAN_POINT ('', (-2.96607586206897, -1.24991034482758, -4.42865153731523));
#6010 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5970, #5980), (#5990, #6000)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-3.01147823593627, -0.616975604539928), (-6.56252415540502, -2.13287261808979), .UNSPECIFIED.);
#6020 = ADVANCED_FACE ('', (#5960), #6010, .T.);
#6030 = ORIENTED_EDGE ('', *, *, #440, .F.);
#6040 = ORIENTED_EDGE ('', *, *, #2730, .F.);
#6050 = ORIENTED_EDGE ('', *, *, #1580, .F.);
#6060 = ORIENTED_EDGE ('', *, *, #4540, .F.);
#6070 = EDGE_LOOP ('', (#6030, #6040, #6050, #6060));
#6080 = FACE_OUTER_BOUND ('', #6070, .T.);
#6090 = CARTESIAN_POINT ('', (-32.616, -1.251, -0.00100000000001935));
#6100 = CARTESIAN_POINT ('', (-32.616, 1.251, -0.00100000000001951));
#6110 = CARTESIAN_POINT ('', (-32.1027094309041, -1.251, 0.512290569095867));
#6120 = CARTESIAN_POINT ('', (-32.1027094309041, 1.251, 0.512290569095866));
#6130 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#6090, #6100), (#6110, #6120)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.724488270691238, 0.00141421356237181), (3.12548325765845, 5.62748325765845), .UNSPECIFIED.);
#6140 = ADVANCED_FACE ('', (#6080), #6130, .T.);
#6150 = ORIENTED_EDGE ('', *, *, #4340, .F.);
#6160 = CARTESIAN_POINT ('', (-0.361274751975799, 1.11017245737622, -1.82392628929109));
#6170 = CARTESIAN_POINT ('', (-0.00354753199610158, 1.13998305904121, 3.74285379633211E-16));
#6180 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6160, #6170), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6190 = EDGE_CURVE ('', #4200, #4890, #6180, .T.);
#6200 = ORIENTED_EDGE ('', *, *, #6190, .T.);
#6210 = ORIENTED_EDGE ('', *, *, #4930, .F.);
#6220 = CARTESIAN_POINT ('', (-0.252163685879101, -1.18198212417821, 7.23755312512118E-17));
#6230 = CARTESIAN_POINT ('', (-1.5754979398452, -1.07170426968103, -6.86870943090415));
#6240 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6220, #6230), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6250 = EDGE_CURVE ('', #4870, #2020, #6240, .T.);
#6260 = ORIENTED_EDGE ('', *, *, #6250, .T.);
#6270 = ORIENTED_EDGE ('', *, *, #2060, .F.);
#6280 = ORIENTED_EDGE ('', *, *, #910, .F.);
#6290 = ORIENTED_EDGE ('', *, *, #5600, .F.);
#6300 = EDGE_LOOP ('', (#6150, #6200, #6210, #6260, #6270, #6280, #6290));
#6310 = FACE_OUTER_BOUND ('', #6300, .T.);
#6320 = CARTESIAN_POINT ('', (-0.256935549693605, -1.31813389299105, 0.0504480215209689));
#6330 = CARTESIAN_POINT ('', (0.0220744807317708, 1.38615461960625, -0.00378603444563872));
#6340 = CARTESIAN_POINT ('', (-1.60114657772566, -1.31813389299105, -6.86491822105312));
#6350 = CARTESIAN_POINT ('', (-1.32213654730028, 1.38615461960624, -6.91915227701973));
#6360 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#6320, #6330), (#6340, #6350)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (2.94901817728447, 9.9938172203244), (-2.83365696232107, -0.114472472575977), .UNSPECIFIED.);
#6370 = ADVANCED_FACE ('', (#6310), #6360, .T.);
#6380 = ORIENTED_EDGE ('', *, *, #3490, .T.);
#6390 = CARTESIAN_POINT ('', (-34.5687252480242, -1.11017245737622, -1.82392628929109));
#6400 = CARTESIAN_POINT ('', (-34.9264524680039, -1.1399830590412, 6.98038302168506E-17));
#6410 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6390, #6400), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6420 = EDGE_CURVE ('', #3370, #2380, #6410, .T.);
#6430 = ORIENTED_EDGE ('', *, *, #6420, .T.);
#6440 = ORIENTED_EDGE ('', *, *, #2440, .T.);
#6450 = CARTESIAN_POINT ('', (-34.6778363141209, 1.18198212417821, -7.23755312512118E-17));
#6460 = CARTESIAN_POINT ('', (-33.3545020601548, 1.07170426968103, -6.86870943090415));
#6470 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6450, #6460), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6480 = EDGE_CURVE ('', #2400, #2160, #6470, .T.);
#6490 = ORIENTED_EDGE ('', *, *, #6480, .T.);
#6500 = ORIENTED_EDGE ('', *, *, #2200, .T.);
#6510 = ORIENTED_EDGE ('', *, *, #1910, .T.);
#6520 = ORIENTED_EDGE ('', *, *, #3680, .T.);
#6530 = EDGE_LOOP ('', (#6380, #6430, #6440, #6490, #6500, #6510, #6520));
#6540 = FACE_OUTER_BOUND ('', #6530, .T.);
#6550 = CARTESIAN_POINT ('', (-33.6078634526997, -1.38615461960624, -6.91915227701973));
#6560 = CARTESIAN_POINT ('', (-33.3288534222744, 1.31813389299105, -6.86491822105313));
#6570 = CARTESIAN_POINT ('', (-34.9520744807318, -1.38615461960624, -0.00378603444564121));
#6580 = CARTESIAN_POINT ('', (-34.6730644503064, 1.31813389299105, 0.0504480215209656));
#6590 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#6550, #6560), (#6570, #6580)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (2.94901817728447, 9.9938172203244), (-5.28552752742402, -2.56634303767894), .UNSPECIFIED.);
#6600 = ADVANCED_FACE ('', (#6540), #6590, .T.);
#6610 = ORIENTED_EDGE ('', *, *, #4270, .F.);
#6620 = ORIENTED_EDGE ('', *, *, #5750, .F.);
#6630 = ORIENTED_EDGE ('', *, *, #5030, .F.);
#6640 = ORIENTED_EDGE ('', *, *, #6190, .F.);
#6650 = EDGE_LOOP ('', (#6610, #6620, #6630, #6640));
#6660 = FACE_OUTER_BOUND ('', #6650, .T.);
#6670 = CARTESIAN_POINT ('', (-0.543753745383391, 1.17526326016805, 0.354610406055596));
#6680 = CARTESIAN_POINT ('', (-1.08641187233881, 1.13004174958843, -2.41221405842733));
#6690 = CARTESIAN_POINT ('', (-0.544679681076246, 1.47522468199496, 0.349889383002079));
#6700 = CARTESIAN_POINT ('', (-1.08733780803167, 1.43000317141533, -2.41693508148085));
#6710 = CARTESIAN_POINT ('', (-0.250288440038581, 1.47522468199496, 0.292150339017069));
#6720 = CARTESIAN_POINT ('', (-0.792946566994004, 1.43000317141533, -2.47467412546586));
#6730 = CARTESIAN_POINT ('', (0.0441028009990845, 1.47522468199496, 0.234411295032059));
#6740 = CARTESIAN_POINT ('', (-0.498555325956339, 1.43000317141533, -2.53241316945087));
#6750 = CARTESIAN_POINT ('', (0.0450287366919397, 1.17526326016805, 0.239132318085576));
#6760 = CARTESIAN_POINT ('', (-0.497629390263484, 1.13004174958843, -2.52769214639735));
#6770 = CARTESIAN_POINT ('', (0.045954672384795, 0.875301838341142, 0.243853341139093));
#6780 = CARTESIAN_POINT ('', (-0.496703454570628, 0.830080327761516, -2.52297112334383));
#6790 = CARTESIAN_POINT ('', (-0.24843656865287, 0.875301838341142, 0.301592385124103));
#6800 = CARTESIAN_POINT ('', (-0.791094695608294, 0.830080327761517, -2.46523207935882));
#6810 = CARTESIAN_POINT ('', (-0.542827809690536, 0.875301838341143, 0.359331429109113));
#6820 = CARTESIAN_POINT ('', (-1.08548593664596, 0.830080327761517, -2.40749303537381));
#6830 = CARTESIAN_POINT ('', (-0.543753745383391, 1.17526326016805, 0.354610406055596));
#6840 = CARTESIAN_POINT ('', (-1.08641187233881, 1.13004174958843, -2.41221405842733));
#6850 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#6670, #6680), (#6690, #6700), (#6710, #6720), (#6730, #6740), (#6750, #6760), (#6770, #6780), (#6790, #6800), (#6810, #6820), (#6830, #6840)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.750000000000001, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#6860 = ADVANCED_FACE ('', (#6660), #6850, .T.);
#6870 = ORIENTED_EDGE ('', *, *, #2120, .F.);
#6880 = ORIENTED_EDGE ('', *, *, #6250, .F.);
#6890 = ORIENTED_EDGE ('', *, *, #5240, .F.);
#6900 = ORIENTED_EDGE ('', *, *, #5910, .F.);
#6910 = ORIENTED_EDGE ('', *, *, #5410, .F.);
#6920 = ORIENTED_EDGE ('', *, *, #1160, .F.);
#6930 = EDGE_LOOP ('', (#6870, #6880, #6890, #6900, #6910, #6920));
#6940 = FACE_OUTER_BOUND ('', #6930, .T.);
#6950 = CARTESIAN_POINT ('', (-1.70984720778937, -1.02900765144835, -7.57473271309727));
#6960 = CARTESIAN_POINT ('', (-0.116591031442354, -1.16177899947728, 0.694994826655461));
#6970 = CARTESIAN_POINT ('', (-1.70895257143864, -0.729044925647067, -7.57008914166313));
#6980 = CARTESIAN_POINT ('', (-0.115696395091618, -0.861816273675993, 0.699638398089597));
#6990 = CARTESIAN_POINT ('', (-2.00353517263122, -0.729044925647066, -7.51333448480917));
#7000 = CARTESIAN_POINT ('', (-0.410278996284202, -0.861816273675993, 0.756393054943562));
#7010 = CARTESIAN_POINT ('', (-2.29811777382381, -0.729044925647066, -7.4565798279552));
#7020 = CARTESIAN_POINT ('', (-0.704861597476786, -0.861816273675993, 0.813147711797528));
#7030 = CARTESIAN_POINT ('', (-2.29901241017454, -1.02900765144835, -7.46122339938933));
#7040 = CARTESIAN_POINT ('', (-0.705756233827522, -1.16177899947728, 0.808504140363393));
#7050 = CARTESIAN_POINT ('', (-2.29990704652528, -1.32897037724963, -7.46586697082347));
#7060 = CARTESIAN_POINT ('', (-0.706650870178258, -1.46174172527856, 0.803860568929258));
#7070 = CARTESIAN_POINT ('', (-2.0053244453327, -1.32897037724963, -7.52262162767743));
#7080 = CARTESIAN_POINT ('', (-0.412068268985674, -1.46174172527856, 0.747105912075292));
#7090 = CARTESIAN_POINT ('', (-1.71074184414011, -1.32897037724963, -7.5793762845314));
#7100 = CARTESIAN_POINT ('', (-0.11748566779309, -1.46174172527856, 0.690351255221327));
#7110 = CARTESIAN_POINT ('', (-1.70984720778937, -1.02900765144835, -7.57473271309727));
#7120 = CARTESIAN_POINT ('', (-0.116591031442354, -1.16177899947728, 0.694994826655461));
#7130 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#6950, #6960), (#6970, #6980), (#6990, #7000), (#7010, #7020), (#7030, #7040), (#7050, #7060), (#7070, #7080), (#7090, #7100), (#7110, #7120)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.749999999999999, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#7140 = ADVANCED_FACE ('', (#6940), #7130, .T.);
#7150 = CARTESIAN_POINT ('', (-34.5708091356787, -1.14157829341694, -1.82184240163652));
#7160 = CARTESIAN_POINT ('', (-34.9281276421366, -1.17135483562177, 9.39759820435681E-15));
#7170 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7150, #7160), .UNSPECIFIED., .F., .U., (2, 2), (0.25511186337322, 0.913571561493961), .UNSPECIFIED.);
#7180 = EDGE_CURVE ('', #3270, #2470, #7170, .T.);
#7190 = ORIENTED_EDGE ('', *, *, #7180, .T.);
#7200 = ORIENTED_EDGE ('', *, *, #2520, .F.);
#7210 = ORIENTED_EDGE ('', *, *, #6420, .F.);
#7220 = ORIENTED_EDGE ('', *, *, #3420, .F.);
#7230 = EDGE_LOOP ('', (#7190, #7200, #7210, #7220));
#7240 = FACE_OUTER_BOUND ('', #7230, .T.);
#7250 = CARTESIAN_POINT ('', (-34.9750287366919, -1.17526326016805, 0.239132318085579));
#7260 = CARTESIAN_POINT ('', (-34.4323706097365, -1.13004174958843, -2.52769214639738));
#7270 = CARTESIAN_POINT ('', (-34.9759546723848, -0.875301838341138, 0.243853341139094));
#7280 = CARTESIAN_POINT ('', (-34.4332965454294, -0.830080327761517, -2.52297112334387));
#7290 = CARTESIAN_POINT ('', (-34.6815634313471, -0.875301838341139, 0.301592385124106));
#7300 = CARTESIAN_POINT ('', (-34.1389053043917, -0.830080327761518, -2.46523207935886));
#7310 = CARTESIAN_POINT ('', (-34.3871721903095, -0.87530183834114, 0.359331429109117));
#7320 = CARTESIAN_POINT ('', (-33.844514063354, -0.83008032776152, -2.40749303537385));
#7330 = CARTESIAN_POINT ('', (-34.3862462546166, -1.17526326016805, 0.3546104060556));
#7340 = CARTESIAN_POINT ('', (-33.8435881276612, -1.13004174958843, -2.41221405842736));
#7350 = CARTESIAN_POINT ('', (-34.3853203189237, -1.47522468199496, 0.349889383002084));
#7360 = CARTESIAN_POINT ('', (-33.8426621919683, -1.43000317141534, -2.41693508148088));
#7370 = CARTESIAN_POINT ('', (-34.6797115599614, -1.47522468199496, 0.292150339017073));
#7380 = CARTESIAN_POINT ('', (-34.137053433006, -1.43000317141534, -2.47467412546589));
#7390 = CARTESIAN_POINT ('', (-34.9741028009991, -1.47522468199496, 0.234411295032062));
#7400 = CARTESIAN_POINT ('', (-34.4314446740436, -1.43000317141533, -2.5324131694509));
#7410 = CARTESIAN_POINT ('', (-34.9750287366919, -1.17526326016805, 0.239132318085579));
#7420 = CARTESIAN_POINT ('', (-34.4323706097365, -1.13004174958843, -2.52769214639738));
#7430 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#7250, #7260), (#7270, #7280), (#7290, #7300), (#7310, #7320), (#7330, #7340), (#7350, #7360), (#7370, #7380), (#7390, #7400), (#7410, #7420)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.250000000000001, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#7440 = ADVANCED_FACE ('', (#7240), #7430, .T.);
#7450 = ORIENTED_EDGE ('', *, *, #2260, .F.);
#7460 = ORIENTED_EDGE ('', *, *, #6480, .F.);
#7470 = ORIENTED_EDGE ('', *, *, #2870, .F.);
#7480 = ORIENTED_EDGE ('', *, *, #3840, .F.);
#7490 = ORIENTED_EDGE ('', *, *, #3040, .F.);
#7500 = ORIENTED_EDGE ('', *, *, #160, .F.);
#7510 = EDGE_LOOP ('', (#7450, #7460, #7470, #7480, #7490, #7500));
#7520 = FACE_OUTER_BOUND ('', #7510, .T.);
#7530 = CARTESIAN_POINT ('', (-32.6309875898254, 1.02900765144835, -7.46122339938925));
#7540 = CARTESIAN_POINT ('', (-34.2242437661724, 1.16177899947727, 0.808504140363408));
#7550 = CARTESIAN_POINT ('', (-32.6300929534746, 1.32897037724964, -7.46586697082338));
#7560 = CARTESIAN_POINT ('', (-34.2233491298216, 1.46174172527856, 0.803860568929273));
#7570 = CARTESIAN_POINT ('', (-32.9246755546672, 1.32897037724964, -7.52262162767735));
#7580 = CARTESIAN_POINT ('', (-34.5179317310142, 1.46174172527856, 0.747105912075309));
#7590 = CARTESIAN_POINT ('', (-33.2192581558598, 1.32897037724964, -7.57937628453131));
#7600 = CARTESIAN_POINT ('', (-34.8125143322068, 1.46174172527856, 0.690351255221345));
#7610 = CARTESIAN_POINT ('', (-33.2201527922105, 1.02900765144835, -7.57473271309718));
#7620 = CARTESIAN_POINT ('', (-34.8134089685575, 1.16177899947727, 0.69499482665548));
#7630 = CARTESIAN_POINT ('', (-33.2210474285613, 0.729044925647068, -7.57008914166305));
#7640 = CARTESIAN_POINT ('', (-34.8143036049083, 0.861816273675986, 0.699638398089615));
#7650 = CARTESIAN_POINT ('', (-32.9264648273687, 0.729044925647068, -7.51333448480908));
#7660 = CARTESIAN_POINT ('', (-34.5197210037157, 0.861816273675985, 0.756393054943578));
#7670 = CARTESIAN_POINT ('', (-32.6318822261761, 0.729044925647067, -7.45657982795512));
#7680 = CARTESIAN_POINT ('', (-34.2251384025231, 0.861816273675984, 0.813147711797542));
#7690 = CARTESIAN_POINT ('', (-32.6309875898254, 1.02900765144835, -7.46122339938925));
#7700 = CARTESIAN_POINT ('', (-34.2242437661724, 1.16177899947727, 0.808504140363408));
#7710 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#7530, #7540), (#7550, #7560), (#7570, #7580), (#7590, #7600), (#7610, #7620), (#7630, #7640), (#7650, #7660), (#7670, #7680), (#7690, #7700)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#7720 = ADVANCED_FACE ('', (#7520), #7710, .T.);
#7730 = ORIENTED_EDGE ('', *, *, #7180, .F.);
#7740 = ORIENTED_EDGE ('', *, *, #3340, .F.);
#7750 = ORIENTED_EDGE ('', *, *, #4000, .F.);
#7760 = ORIENTED_EDGE ('', *, *, #2620, .F.);
#7770 = EDGE_LOOP ('', (#7730, #7740, #7750, #7760));
#7780 = FACE_OUTER_BOUND ('', #7770, .T.);
#7790 = CARTESIAN_POINT ('', (-34.9750287366919, -1.17526326016805, 0.239132318085579));
#7800 = CARTESIAN_POINT ('', (-34.4323706097365, -1.13004174958843, -2.52769214639738));
#7810 = CARTESIAN_POINT ('', (-34.9759546723848, -0.875301838341138, 0.243853341139094));
#7820 = CARTESIAN_POINT ('', (-34.4332965454294, -0.830080327761517, -2.52297112334387));
#7830 = CARTESIAN_POINT ('', (-34.6815634313471, -0.875301838341139, 0.301592385124106));
#7840 = CARTESIAN_POINT ('', (-34.1389053043917, -0.830080327761518, -2.46523207935886));
#7850 = CARTESIAN_POINT ('', (-34.3871721903095, -0.87530183834114, 0.359331429109117));
#7860 = CARTESIAN_POINT ('', (-33.844514063354, -0.83008032776152, -2.40749303537385));
#7870 = CARTESIAN_POINT ('', (-34.3862462546166, -1.17526326016805, 0.3546104060556));
#7880 = CARTESIAN_POINT ('', (-33.8435881276612, -1.13004174958843, -2.41221405842736));
#7890 = CARTESIAN_POINT ('', (-34.3853203189237, -1.47522468199496, 0.349889383002084));
#7900 = CARTESIAN_POINT ('', (-33.8426621919683, -1.43000317141534, -2.41693508148088));
#7910 = CARTESIAN_POINT ('', (-34.6797115599614, -1.47522468199496, 0.292150339017073));
#7920 = CARTESIAN_POINT ('', (-34.137053433006, -1.43000317141534, -2.47467412546589));
#7930 = CARTESIAN_POINT ('', (-34.9741028009991, -1.47522468199496, 0.234411295032062));
#7940 = CARTESIAN_POINT ('', (-34.4314446740436, -1.43000317141533, -2.5324131694509));
#7950 = CARTESIAN_POINT ('', (-34.9750287366919, -1.17526326016805, 0.239132318085579));
#7960 = CARTESIAN_POINT ('', (-34.4323706097365, -1.13004174958843, -2.52769214639738));
#7970 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#7790, #7800), (#7810, #7820), (#7830, #7840), (#7850, #7860), (#7870, #7880), (#7890, #7900), (#7910, #7920), (#7930, #7940), (#7950, #7960)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.250000000000001, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#7980 = ADVANCED_FACE ('', (#7780), #7970, .T.);
#7990 = CLOSED_SHELL ('', (#1000, #2000, #2360, #2960, #3180, #3640, #3790, #3950, #4110, #4490, #4690, #4850, #5330, #5550, #5700, #5860, #6020, #6140, #6370, #6600, #6860, #7140, #7440, #7720, #7980));
#8000 = MANIFOLD_SOLID_BREP ('CUT', #7990);
#8010 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#8020 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#8030 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#8040 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #8010, 'DISTANCE_ACCURACY_VALUE', '');
#8050 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#8040))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#8010, #8020, #8030))
   REPRESENTATION_CONTEXT ('', '3D')
);
#8060 = COLOUR_RGB ('', 1., 0.74901960784314, 0.);
#8070 = FILL_AREA_STYLE_COLOUR ('', #8060);
#8080 = FILL_AREA_STYLE ('', (#8070));
#8090 = SURFACE_STYLE_FILL_AREA (#8080);
#8100 = SURFACE_SIDE_STYLE ('', (#8090));
#8110 = SURFACE_STYLE_USAGE (.POSITIVE., #8100);
#8120 = PRESENTATION_STYLE_ASSIGNMENT ((#8110));
#8130 = STYLED_ITEM ('', (#8120), #8000);
#8140 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#8000), #8050);
#8150 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#8160 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #8150);
#8170 = MECHANICAL_CONTEXT ('', #8150, 'mechanical');
#8180 = PRODUCT ('NONE', '', '', (#8170));
#8190 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#8200 = PERSON ('', '', $, $, $, $);
#8210 = ORGANIZATION ($, '', '');
#8220 = PERSON_AND_ORGANIZATION (#8200, #8210);
#8230 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#8220, #8190, (#8180));
#8240 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#8180));
#8250 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #8180, .NOT_KNOWN.);
#8260 = APPROVAL_STATUS ('approved');
#8270 = APPROVAL (#8260, '');
#8280 = CALENDAR_DATE (2017, 7, 3);
#8290 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#8300 = LOCAL_TIME (8, 57, 19., #8290);
#8310 = DATE_AND_TIME (#8280, #8300);
#8320 = APPROVAL_DATE_TIME (#8310, #8270);
#8330 = APPROVAL_ROLE ('');
#8340 = PERSON ('', '', $, $, $, $);
#8350 = ORGANIZATION ($, '', '');
#8360 = PERSON_AND_ORGANIZATION (#8340, #8350);
#8370 = APPROVAL_PERSON_ORGANIZATION (#8360, #8270, #8330);
#8380 = CC_DESIGN_APPROVAL (#8270, (#8250));
#8390 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#8400 = PERSON ('', '', $, $, $, $);
#8410 = ORGANIZATION ($, '', '');
#8420 = PERSON_AND_ORGANIZATION (#8400, #8410);
#8430 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#8420, #8390, (#8250));
#8440 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#8450 = PERSON ('', '', $, $, $, $);
#8460 = ORGANIZATION ($, '', '');
#8470 = PERSON_AND_ORGANIZATION (#8450, #8460);
#8480 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#8470, #8440, (#8250));
#8490 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#8500 = SECURITY_CLASSIFICATION ('', '', #8490);
#8510 = APPROVAL_STATUS ('approved');
#8520 = APPROVAL (#8510, '');
#8530 = CALENDAR_DATE (2017, 7, 3);
#8540 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#8550 = LOCAL_TIME (8, 57, 19., #8540);
#8560 = DATE_AND_TIME (#8530, #8550);
#8570 = APPROVAL_DATE_TIME (#8560, #8520);
#8580 = APPROVAL_ROLE ('');
#8590 = PERSON ('', '', $, $, $, $);
#8600 = ORGANIZATION ($, '', '');
#8610 = PERSON_AND_ORGANIZATION (#8590, #8600);
#8620 = APPROVAL_PERSON_ORGANIZATION (#8610, #8520, #8580);
#8630 = CC_DESIGN_APPROVAL (#8520, (#8500));
#8640 = DATE_TIME_ROLE ('classification_date');
#8650 = CALENDAR_DATE (2017, 7, 3);
#8660 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#8670 = LOCAL_TIME (8, 57, 19., #8660);
#8680 = DATE_AND_TIME (#8650, #8670);
#8690 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#8680, #8640, (#8500));
#8700 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#8710 = PERSON ('', '', $, $, $, $);
#8720 = ORGANIZATION ($, '', '');
#8730 = PERSON_AND_ORGANIZATION (#8710, #8720);
#8740 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#8730, #8700, (#8500));
#8750 = CC_DESIGN_SECURITY_CLASSIFICATION (#8500, (#8250));
#8760 = DESIGN_CONTEXT ('', #8150, 'design');
#8770 = PRODUCT_DEFINITION ('', '', #8250, #8760);
#8780 = APPROVAL_STATUS ('approved');
#8790 = APPROVAL (#8780, '');
#8800 = CALENDAR_DATE (2017, 7, 3);
#8810 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#8820 = LOCAL_TIME (8, 57, 19., #8810);
#8830 = DATE_AND_TIME (#8800, #8820);
#8840 = APPROVAL_DATE_TIME (#8830, #8790);
#8850 = APPROVAL_ROLE ('');
#8860 = PERSON ('', '', $, $, $, $);
#8870 = ORGANIZATION ($, '', '');
#8880 = PERSON_AND_ORGANIZATION (#8860, #8870);
#8890 = APPROVAL_PERSON_ORGANIZATION (#8880, #8790, #8850);
#8900 = CC_DESIGN_APPROVAL (#8790, (#8770));
#8910 = DATE_TIME_ROLE ('creation_date');
#8920 = CALENDAR_DATE (2017, 7, 3);
#8930 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#8940 = LOCAL_TIME (8, 57, 19., #8930);
#8950 = DATE_AND_TIME (#8920, #8940);
#8960 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#8950, #8910, (#8770));
#8970 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#8980 = PERSON ('', '', $, $, $, $);
#8990 = ORGANIZATION ($, '', '');
#9000 = PERSON_AND_ORGANIZATION (#8980, #8990);
#9010 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#9000, #8970, (#8770));
#9020 = PRODUCT_DEFINITION_SHAPE ('', '', #8770);
#9030 = SHAPE_DEFINITION_REPRESENTATION (#9020, #8140);
ENDSEC;
END-ISO-10303-21;