ISO-10303-21;
HEADER;
FILE_DESCRIPTION ((), '1');
FILE_NAME ('SCLCR 2020 K09.stp', '2018-06-28T17:02:42', ('TDM Systems GmbH'), ('TDM Systems GmbH'), 'HarmonyWare STEP v2.0.2.9', 'TDM', '');
FILE_SCHEMA (('CONFIG_CONTROL_DESIGN'));
ENDSEC;

DATA;
#10 = CARTESIAN_POINT ('', (-106.25, -10., 0.));
#20 = VERTEX_POINT ('', #10);
#30 = CARTESIAN_POINT ('', (-106.25, -10., 20.));
#40 = VERTEX_POINT ('', #30);
#50 = CARTESIAN_POINT ('', (-106.25, -10., 0.));
#60 = CARTESIAN_POINT ('', (-106.25, -10., 20.));
#70 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#50, #60), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#80 = EDGE_CURVE ('', #20, #40, #70, .T.);
#90 = ORIENTED_EDGE ('', *, *, #80, .T.);
#100 = CARTESIAN_POINT ('', (-106.25, 10., 20.));
#110 = VERTEX_POINT ('', #100);
#120 = CARTESIAN_POINT ('', (-106.25, -10., 20.));
#130 = CARTESIAN_POINT ('', (-106.25, 10., 20.));
#140 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#120, #130), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#150 = EDGE_CURVE ('', #40, #110, #140, .T.);
#160 = ORIENTED_EDGE ('', *, *, #150, .T.);
#170 = CARTESIAN_POINT ('', (-106.25, 10., 0.));
#180 = VERTEX_POINT ('', #170);
#190 = CARTESIAN_POINT ('', (-106.25, 10., 20.));
#200 = CARTESIAN_POINT ('', (-106.25, 10., 0.));
#210 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#190, #200), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#220 = EDGE_CURVE ('', #110, #180, #210, .T.);
#230 = ORIENTED_EDGE ('', *, *, #220, .T.);
#240 = CARTESIAN_POINT ('', (-106.25, -10., 0.));
#250 = CARTESIAN_POINT ('', (-106.25, 10., 0.));
#260 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#240, #250), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#270 = EDGE_CURVE ('', #20, #180, #260, .T.);
#280 = ORIENTED_EDGE ('', *, *, #270, .F.);
#290 = EDGE_LOOP ('', (#90, #160, #230, #280));
#300 = FACE_OUTER_BOUND ('', #290, .T.);
#310 = CARTESIAN_POINT ('', (-106.25, 10.001, 20.001));
#320 = CARTESIAN_POINT ('', (-106.25, -10.001, 20.001));
#330 = CARTESIAN_POINT ('', (-106.25, 10.001, -0.001));
#340 = CARTESIAN_POINT ('', (-106.25, -10.001, -0.001));
#350 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#310, #320), (#330, #340)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-20.001, 0.001), (-20.001, 0.001), .UNSPECIFIED.);
#360 = ADVANCED_FACE ('', (#300), #350, .T.);
#370 = CARTESIAN_POINT ('', (18.920572783703, 14.3872428718712, 0.));
#380 = VERTEX_POINT ('', #370);
#390 = CARTESIAN_POINT ('', (18.920572783703, 14.3872428718712, 16.03));
#400 = VERTEX_POINT ('', #390);
#410 = CARTESIAN_POINT ('', (18.920572783703, 14.3872428718712, 0.));
#420 = CARTESIAN_POINT ('', (18.920572783703, 14.3872428718712, 16.03));
#430 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#410, #420), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#440 = EDGE_CURVE ('', #380, #400, #430, .T.);
#450 = ORIENTED_EDGE ('', *, *, #440, .T.);
#460 = CARTESIAN_POINT ('', (19.137242871871, 14.1705727837033, 16.03));
#470 = VERTEX_POINT ('', #460);
#480 = CARTESIAN_POINT ('', (18.920572783703, 14.3872428718712, 16.03));
#490 = CARTESIAN_POINT ('', (19.0134794270498, 14.3953711499305, 16.03));
#500 = CARTESIAN_POINT ('', (19.0794252884902, 14.3294252884903, 16.03));
#510 = CARTESIAN_POINT ('', (19.1453711499305, 14.2634794270502, 16.03));
#520 = CARTESIAN_POINT ('', (19.1372428718713, 14.1705727837033, 16.03));
#530 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#480, #490, #500, #510, #520), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (264.999999999864, 314.999999999946, 365.000000000029), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.906307787036347, 1., 0.906307787036347, 1.))
   REPRESENTATION_ITEM ('')
);
#540 = EDGE_CURVE ('', #400, #470, #530, .T.);
#550 = ORIENTED_EDGE ('', *, *, #540, .T.);
#560 = CARTESIAN_POINT ('', (19.137242871871, 14.1705727837033, 0.));
#570 = VERTEX_POINT ('', #560);
#580 = CARTESIAN_POINT ('', (19.137242871871, 14.1705727837033, 16.03));
#590 = CARTESIAN_POINT ('', (19.137242871871, 14.1705727837033, 0.));
#600 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#580, #590), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#610 = EDGE_CURVE ('', #470, #570, #600, .T.);
#620 = ORIENTED_EDGE ('', *, *, #610, .T.);
#630 = CARTESIAN_POINT ('', (19.1372428718713, 14.1705727837033, 0.));
#640 = CARTESIAN_POINT ('', (19.1453711499305, 14.2634794270502, 0.));
#650 = CARTESIAN_POINT ('', (19.0794252884902, 14.3294252884903, 0.));
#660 = CARTESIAN_POINT ('', (19.0134794270499, 14.3953711499305, 0.));
#670 = CARTESIAN_POINT ('', (18.920572783703, 14.3872428718712, 0.));
#680 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#630, #640, #650, #660, #670), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (309.999999999969, 360.000000000049, 410.00000000013), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.906307787036354, 1., 0.906307787036354, 1.))
   REPRESENTATION_ITEM ('')
);
#690 = EDGE_CURVE ('', #570, #380, #680, .T.);
#700 = ORIENTED_EDGE ('', *, *, #690, .T.);
#710 = EDGE_LOOP ('', (#450, #550, #620, #700));
#720 = FACE_OUTER_BOUND ('', #710, .T.);
#730 = CARTESIAN_POINT ('', (18.7965825760157, 14.0465825760156, -1.6042));
#740 = CARTESIAN_POINT ('', (18.7965825760157, 14.0465825760156, 17.6342));
#750 = CARTESIAN_POINT ('', (18.938003932253, 13.9051612197783, -1.6042));
#760 = CARTESIAN_POINT ('', (18.938003932253, 13.9051612197783, 17.6342));
#770 = CARTESIAN_POINT ('', (19.0794252884903, 14.0465825760156, -1.6042));
#780 = CARTESIAN_POINT ('', (19.0794252884903, 14.0465825760156, 17.6342));
#790 = CARTESIAN_POINT ('', (19.2208466447276, 14.1880039322529, -1.6042));
#800 = CARTESIAN_POINT ('', (19.2208466447276, 14.1880039322529, 17.6342));
#810 = CARTESIAN_POINT ('', (19.0794252884903, 14.3294252884902, -1.6042));
#820 = CARTESIAN_POINT ('', (19.0794252884903, 14.3294252884902, 17.6342));
#830 = CARTESIAN_POINT ('', (18.9380039322529, 14.4708466447275, -1.6042));
#840 = CARTESIAN_POINT ('', (18.9380039322529, 14.4708466447275, 17.6342));
#850 = CARTESIAN_POINT ('', (18.7965825760157, 14.3294252884902, -1.6042));
#860 = CARTESIAN_POINT ('', (18.7965825760157, 14.3294252884902, 17.6342));
#870 = CARTESIAN_POINT ('', (18.6551612197784, 14.1880039322529, -1.6042));
#880 = CARTESIAN_POINT ('', (18.6551612197784, 14.1880039322529, 17.6342));
#890 = CARTESIAN_POINT ('', (18.7965825760157, 14.0465825760156, -1.6042));
#900 = CARTESIAN_POINT ('', (18.7965825760157, 14.0465825760156, 17.6342));
#910 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#730, #740), (#750, #760), (#770, #780), (#790, #800), (#810, #820), (#830, #840), (#850, #860), (#870, #880), (#890, #900)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.249999999999997, 0.499999999999999, 0.749999999999999, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#920 = ADVANCED_FACE ('', (#720), #910, .T.);
#930 = ORIENTED_EDGE ('', *, *, #150, .F.);
#940 = CARTESIAN_POINT ('', (17.022591762369, -10., 20.));
#950 = VERTEX_POINT ('', #940);
#960 = CARTESIAN_POINT ('', (17.022591762369, -10., 20.));
#970 = CARTESIAN_POINT ('', (-106.25, -10., 20.));
#980 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#960, #970), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#990 = EDGE_CURVE ('', #950, #40, #980, .T.);
#1000 = ORIENTED_EDGE ('', *, *, #990, .F.);
#1010 = CARTESIAN_POINT ('', (18.389229312204, 5.6207386735331, 20.));
#1020 = VERTEX_POINT ('', #1010);
#1030 = CARTESIAN_POINT ('', (18.389229312204, 5.6207386735331, 20.));
#1040 = CARTESIAN_POINT ('', (17.022591762369, -10., 20.));
#1050 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1030, #1040), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1060 = EDGE_CURVE ('', #1020, #950, #1050, .T.);
#1070 = ORIENTED_EDGE ('', *, *, #1060, .F.);
#1080 = CARTESIAN_POINT ('', (10.551726368258, 4.9350460155867, 20.));
#1090 = VERTEX_POINT ('', #1080);
#1100 = CARTESIAN_POINT ('', (18.389229312204, 5.6207386735331, 20.));
#1110 = CARTESIAN_POINT ('', (10.551726368258, 4.9350460155867, 20.));
#1120 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1100, #1110), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1130 = EDGE_CURVE ('', #1020, #1090, #1120, .T.);
#1140 = ORIENTED_EDGE ('', *, *, #1130, .T.);
#1150 = CARTESIAN_POINT ('', (9.68504601558701, 5.8017263682583, 20.));
#1160 = VERTEX_POINT ('', #1150);
#1170 = CARTESIAN_POINT ('', (10.551726368258, 4.93504601558669, 20.));
#1180 = CARTESIAN_POINT ('', (10.1800997948711, 4.90253290335041, 20.));
#1190 = CARTESIAN_POINT ('', (9.91631634911069, 5.16631634911094, 20.));
#1200 = CARTESIAN_POINT ('', (9.65253290335022, 5.43009979487147, 20.));
#1210 = CARTESIAN_POINT ('', (9.68504601558661, 5.80172636825833, 20.));
#1220 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1170, #1180, #1190, #1200, #1210), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (80.0000000000076, 130.000000000008, 180.000000000008), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.906307787036649, 1., 0.906307787036649, 1.))
   REPRESENTATION_ITEM ('')
);
#1230 = EDGE_CURVE ('', #1090, #1160, #1220, .T.);
#1240 = ORIENTED_EDGE ('', *, *, #1230, .T.);
#1250 = CARTESIAN_POINT ('', (10.370738673533, 13.6392293122041, 20.));
#1260 = VERTEX_POINT ('', #1250);
#1270 = CARTESIAN_POINT ('', (9.68504601558701, 5.8017263682583, 20.));
#1280 = CARTESIAN_POINT ('', (10.370738673533, 13.6392293122041, 20.));
#1290 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1270, #1280), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1300 = EDGE_CURVE ('', #1160, #1260, #1290, .T.);
#1310 = ORIENTED_EDGE ('', *, *, #1300, .T.);
#1320 = CARTESIAN_POINT ('', (2.54159369302199, 12.9542678813084, 20.));
#1330 = VERTEX_POINT ('', #1320);
#1340 = CARTESIAN_POINT ('', (2.54159369302199, 12.9542678813084, 20.));
#1350 = CARTESIAN_POINT ('', (10.370738673533, 13.6392293122041, 20.));
#1360 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1340, #1350), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1370 = EDGE_CURVE ('', #1330, #1260, #1360, .T.);
#1380 = ORIENTED_EDGE ('', *, *, #1370, .F.);
#1390 = CARTESIAN_POINT ('', (1.75, 10., 20.));
#1400 = VERTEX_POINT ('', #1390);
#1410 = CARTESIAN_POINT ('', (1.75, 10., 20.));
#1420 = CARTESIAN_POINT ('', (2.54159369302199, 12.9542678813084, 20.));
#1430 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1410, #1420), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1440 = EDGE_CURVE ('', #1400, #1330, #1430, .T.);
#1450 = ORIENTED_EDGE ('', *, *, #1440, .F.);
#1460 = CARTESIAN_POINT ('', (-106.25, 10., 20.));
#1470 = CARTESIAN_POINT ('', (1.75, 10., 20.));
#1480 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1460, #1470), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1490 = EDGE_CURVE ('', #110, #1400, #1480, .T.);
#1500 = ORIENTED_EDGE ('', *, *, #1490, .F.);
#1510 = EDGE_LOOP ('', (#930, #1000, #1070, #1140, #1240, #1310, #1380, #1450, #1500));
#1520 = FACE_OUTER_BOUND ('', #1510, .T.);
#1530 = CARTESIAN_POINT ('', (18.390229312204, 13.6402293122041, 20.));
#1540 = CARTESIAN_POINT ('', (18.390229312204, -10.001, 20.));
#1550 = CARTESIAN_POINT ('', (-106.251, 13.6402293122041, 20.));
#1560 = CARTESIAN_POINT ('', (-106.251, -10.001, 20.));
#1570 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1530, #1540), (#1550, #1560)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-61.140229312204, 63.501), (-10.6402293122041, 13.001), .UNSPECIFIED.);
#1580 = ADVANCED_FACE ('', (#1520), #1570, .T.);
#1590 = CARTESIAN_POINT ('', (10.863829627553, 13.6823691807679, 16.03));
#1600 = VERTEX_POINT ('', #1590);
#1610 = CARTESIAN_POINT ('', (10.863829627553, 13.6823691807679, 16.03));
#1620 = CARTESIAN_POINT ('', (10.370738673533, 13.6392293122041, 20.));
#1630 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1610, #1620), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1640 = EDGE_CURVE ('', #1600, #1260, #1630, .T.);
#1650 = ORIENTED_EDGE ('', *, *, #1640, .F.);
#1660 = CARTESIAN_POINT ('', (10.863829627553, 13.6823691807679, 16.03));
#1670 = CARTESIAN_POINT ('', (18.920572783703, 14.3872428718712, 16.03));
#1680 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1660, #1670), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1690 = EDGE_CURVE ('', #1600, #400, #1680, .T.);
#1700 = ORIENTED_EDGE ('', *, *, #1690, .T.);
#1710 = ORIENTED_EDGE ('', *, *, #440, .F.);
#1720 = CARTESIAN_POINT ('', (2.54159369302199, 12.9542678813084, 0.));
#1730 = VERTEX_POINT ('', #1720);
#1740 = CARTESIAN_POINT ('', (18.920572783703, 14.3872428718712, 0.));
#1750 = CARTESIAN_POINT ('', (2.54159369302199, 12.9542678813084, 0.));
#1760 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1740, #1750), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1770 = EDGE_CURVE ('', #380, #1730, #1760, .T.);
#1780 = ORIENTED_EDGE ('', *, *, #1770, .T.);
#1790 = CARTESIAN_POINT ('', (2.54159369302199, 12.9542678813084, 0.));
#1800 = CARTESIAN_POINT ('', (2.54159369302199, 12.9542678813084, 20.));
#1810 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1790, #1800), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1820 = EDGE_CURVE ('', #1730, #1330, #1810, .T.);
#1830 = ORIENTED_EDGE ('', *, *, #1820, .T.);
#1840 = ORIENTED_EDGE ('', *, *, #1370, .T.);
#1850 = EDGE_LOOP ('', (#1650, #1700, #1710, #1780, #1830, #1840));
#1860 = FACE_OUTER_BOUND ('', #1850, .T.);
#1870 = CARTESIAN_POINT ('', (18.9216520116683, 14.3873372920835, 20.001));
#1880 = CARTESIAN_POINT ('', (2.54051446505666, 12.9541734610961, 20.001));
#1890 = CARTESIAN_POINT ('', (18.9216520116683, 14.3873372920835, -0.00100000000000122));
#1900 = CARTESIAN_POINT ('', (2.54051446505666, 12.9541734610961, -0.00100000000000122));
#1910 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1870, #1880), (#1890, #1900)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00100000000000122, 20.001), (-16.4426274803741, 0.00108335044083674), .UNSPECIFIED.);
#1920 = ADVANCED_FACE ('', (#1860), #1910, .T.);
#1930 = CARTESIAN_POINT ('', (17.022591762369, -10., 0.));
#1940 = VERTEX_POINT ('', #1930);
#1950 = CARTESIAN_POINT ('', (-106.25, -10., 0.));
#1960 = CARTESIAN_POINT ('', (17.022591762369, -10., 0.));
#1970 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1950, #1960), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1980 = EDGE_CURVE ('', #20, #1940, #1970, .T.);
#1990 = ORIENTED_EDGE ('', *, *, #1980, .F.);
#2000 = ORIENTED_EDGE ('', *, *, #270, .T.);
#2010 = CARTESIAN_POINT ('', (1.75, 10., 0.));
#2020 = VERTEX_POINT ('', #2010);
#2030 = CARTESIAN_POINT ('', (1.75, 10., 0.));
#2040 = CARTESIAN_POINT ('', (-106.25, 10., 0.));
#2050 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2030, #2040), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2060 = EDGE_CURVE ('', #2020, #180, #2050, .T.);
#2070 = ORIENTED_EDGE ('', *, *, #2060, .F.);
#2080 = CARTESIAN_POINT ('', (2.54159369302199, 12.9542678813084, 0.));
#2090 = CARTESIAN_POINT ('', (1.75, 10., 0.));
#2100 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2080, #2090), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2110 = EDGE_CURVE ('', #1730, #2020, #2100, .T.);
#2120 = ORIENTED_EDGE ('', *, *, #2110, .F.);
#2130 = ORIENTED_EDGE ('', *, *, #1770, .F.);
#2140 = ORIENTED_EDGE ('', *, *, #690, .F.);
#2150 = CARTESIAN_POINT ('', (17.022591762369, -10., 0.));
#2160 = CARTESIAN_POINT ('', (19.137242871871, 14.1705727837033, 0.));
#2170 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2150, #2160), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2180 = EDGE_CURVE ('', #1940, #570, #2170, .T.);
#2190 = ORIENTED_EDGE ('', *, *, #2180, .F.);
#2200 = EDGE_LOOP ('', (#1990, #2000, #2070, #2120, #2130, #2140, #2190));
#2210 = FACE_OUTER_BOUND ('', #2200, .T.);
#2220 = CARTESIAN_POINT ('', (-106.251, 14.3963711499305, 0.));
#2230 = CARTESIAN_POINT ('', (-106.251, -10.001, 0.));
#2240 = CARTESIAN_POINT ('', (19.1463711499305, 14.3963711499305, 0.));
#2250 = CARTESIAN_POINT ('', (19.1463711499305, -10.001, 0.));
#2260 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2220, #2230), (#2240, #2250)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-61.8963711499305, 63.501), (-11.3963711499305, 13.001), .UNSPECIFIED.);
#2270 = ADVANCED_FACE ('', (#2210), #2260, .T.);
#2280 = ORIENTED_EDGE ('', *, *, #80, .F.);
#2290 = ORIENTED_EDGE ('', *, *, #1980, .T.);
#2300 = CARTESIAN_POINT ('', (17.022591762369, -10., 20.));
#2310 = CARTESIAN_POINT ('', (17.022591762369, -10., 0.));
#2320 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2300, #2310), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2330 = EDGE_CURVE ('', #950, #1940, #2320, .T.);
#2340 = ORIENTED_EDGE ('', *, *, #2330, .F.);
#2350 = ORIENTED_EDGE ('', *, *, #990, .T.);
#2360 = EDGE_LOOP ('', (#2280, #2290, #2340, #2350));
#2370 = FACE_OUTER_BOUND ('', #2360, .T.);
#2380 = CARTESIAN_POINT ('', (17.023591762369, -10., -0.001));
#2390 = CARTESIAN_POINT ('', (-106.251, -10., -0.001));
#2400 = CARTESIAN_POINT ('', (17.023591762369, -10., 20.001));
#2410 = CARTESIAN_POINT ('', (-106.251, -10., 20.001));
#2420 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2380, #2390), (#2400, #2410)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.001, 20.001), (3.72640823763099, 127.001), .UNSPECIFIED.);
#2430 = ADVANCED_FACE ('', (#2370), #2420, .T.);
#2440 = CARTESIAN_POINT ('', (18.432369180768, 6.1138296275526, 16.03));
#2450 = VERTEX_POINT ('', #2440);
#2460 = CARTESIAN_POINT ('', (18.389229312204, 5.6207386735331, 20.));
#2470 = CARTESIAN_POINT ('', (18.432369180768, 6.1138296275526, 16.03));
#2480 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2460, #2470), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2490 = EDGE_CURVE ('', #1020, #2450, #2480, .T.);
#2500 = ORIENTED_EDGE ('', *, *, #2490, .F.);
#2510 = ORIENTED_EDGE ('', *, *, #1060, .T.);
#2520 = ORIENTED_EDGE ('', *, *, #2330, .T.);
#2530 = ORIENTED_EDGE ('', *, *, #2180, .T.);
#2540 = ORIENTED_EDGE ('', *, *, #610, .F.);
#2550 = CARTESIAN_POINT ('', (19.137242871871, 14.1705727837033, 16.03));
#2560 = CARTESIAN_POINT ('', (18.432369180768, 6.1138296275526, 16.03));
#2570 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2550, #2560), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2580 = EDGE_CURVE ('', #470, #2450, #2570, .T.);
#2590 = ORIENTED_EDGE ('', *, *, #2580, .T.);
#2600 = EDGE_LOOP ('', (#2500, #2510, #2520, #2530, #2540, #2590));
#2610 = FACE_OUTER_BOUND ('', #2600, .T.);
#2620 = CARTESIAN_POINT ('', (19.1373372920834, 14.1716520116686, -0.00100000000000122));
#2630 = CARTESIAN_POINT ('', (17.0224973421564, -10.0010792279653, -0.00100000000000122));
#2640 = CARTESIAN_POINT ('', (19.1373372920834, 14.1716520116686, 20.001));
#2650 = CARTESIAN_POINT ('', (17.0224973421564, -10.0010792279653, 20.001));
#2660 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2620, #2630), (#2640, #2650)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-20.001, 0.00100000000000122), (0.237267368078072, 24.5023345140264), .UNSPECIFIED.);
#2670 = ADVANCED_FACE ('', (#2610), #2660, .T.);
#2680 = ORIENTED_EDGE ('', *, *, #220, .F.);
#2690 = ORIENTED_EDGE ('', *, *, #1490, .T.);
#2700 = CARTESIAN_POINT ('', (1.75, 10., 0.));
#2710 = CARTESIAN_POINT ('', (1.75, 10., 20.));
#2720 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2700, #2710), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2730 = EDGE_CURVE ('', #2020, #1400, #2720, .T.);
#2740 = ORIENTED_EDGE ('', *, *, #2730, .F.);
#2750 = ORIENTED_EDGE ('', *, *, #2060, .T.);
#2760 = EDGE_LOOP ('', (#2680, #2690, #2740, #2750));
#2770 = FACE_OUTER_BOUND ('', #2760, .T.);
#2780 = CARTESIAN_POINT ('', (1.75099999999999, 10., 20.001));
#2790 = CARTESIAN_POINT ('', (-106.251, 10., 20.001));
#2800 = CARTESIAN_POINT ('', (1.75099999999999, 10., -0.00100000000000122));
#2810 = CARTESIAN_POINT ('', (-106.251, 10., -0.00100000000000122));
#2820 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2780, #2790), (#2800, #2810)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00100000000000122, 20.001), (-108.001, 0.000999999999993877), .UNSPECIFIED.);
#2830 = ADVANCED_FACE ('', (#2770), #2820, .T.);
#2840 = ORIENTED_EDGE ('', *, *, #1440, .T.);
#2850 = ORIENTED_EDGE ('', *, *, #1820, .F.);
#2860 = ORIENTED_EDGE ('', *, *, #2110, .T.);
#2870 = ORIENTED_EDGE ('', *, *, #2730, .T.);
#2880 = EDGE_LOOP ('', (#2840, #2850, #2860, #2870));
#2890 = FACE_OUTER_BOUND ('', #2880, .T.);
#2900 = CARTESIAN_POINT ('', (2.54191068031989, 12.9554508940104, 20.001));
#2910 = CARTESIAN_POINT ('', (1.74968301270189, 9.9988169872981, 20.001));
#2920 = CARTESIAN_POINT ('', (2.54191068031989, 12.9554508940104, -0.00100000000000122));
#2930 = CARTESIAN_POINT ('', (1.74968301270189, 9.9988169872981, -0.00100000000000122));
#2940 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2900, #2910), (#2920, #2930)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00100000000000122, 20.001), (-3.0597079129406, 0.00122474487139357), .UNSPECIFIED.);
#2950 = ADVANCED_FACE ('', (#2890), #2940, .T.);
#2960 = ORIENTED_EDGE ('', *, *, #1640, .T.);
#2970 = ORIENTED_EDGE ('', *, *, #1300, .F.);
#2980 = CARTESIAN_POINT ('', (10.170645810045, 5.7592418912326, 16.03));
#2990 = VERTEX_POINT ('', #2980);
#3000 = CARTESIAN_POINT ('', (10.170645810045, 5.7592418912326, 16.03));
#3010 = CARTESIAN_POINT ('', (9.68504601558701, 5.8017263682583, 20.));
#3020 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3000, #3010), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3030 = EDGE_CURVE ('', #2990, #1160, #3020, .T.);
#3040 = ORIENTED_EDGE ('', *, *, #3030, .F.);
#3050 = CARTESIAN_POINT ('', (10.170645810045, 5.7592418912326, 16.03));
#3060 = CARTESIAN_POINT ('', (10.863829627553, 13.6823691807679, 16.03));
#3070 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3050, #3060), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3080 = EDGE_CURVE ('', #2990, #1600, #3070, .T.);
#3090 = ORIENTED_EDGE ('', *, *, #3080, .T.);
#3100 = EDGE_LOOP ('', (#2960, #2970, #3040, #3090));
#3110 = FACE_OUTER_BOUND ('', #3100, .T.);
#3120 = CARTESIAN_POINT ('', (10.1772163001773, 5.7150950821431, 15.9453547050828));
#3130 = CARTESIAN_POINT ('', (9.67096411773743, 5.75938640899185, 20.0841974048142));
#3140 = CARTESIAN_POINT ('', (10.8742776341164, 13.6825425873007, 15.9453547050828));
#3150 = CARTESIAN_POINT ('', (10.3680254516766, 13.7268339141494, 20.0841974048142));
#3160 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3120, #3130), (#3140, #3150)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.0927802001371418, 8.09066206039957), (-4.08509497337954, 0.0848297126284141), .UNSPECIFIED.);
#3170 = ADVANCED_FACE ('', (#3110), #3160, .T.);
#3180 = CARTESIAN_POINT ('', (10.509241891233, 5.4206458100453, 16.03));
#3190 = VERTEX_POINT ('', #3180);
#3200 = CARTESIAN_POINT ('', (10.509241891233, 5.42064581004537, 16.03));
#3210 = CARTESIAN_POINT ('', (10.3640542208005, 5.40794353479854, 16.03));
#3220 = CARTESIAN_POINT ('', (10.2609988777996, 5.51099887779932, 16.03));
#3230 = CARTESIAN_POINT ('', (10.1579435347986, 5.61405422080011, 16.03));
#3240 = CARTESIAN_POINT ('', (10.1706458100452, 5.75924189123258, 16.03));
#3250 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#3200, #3210, #3220, #3230, #3240), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (79.9999999999041, 129.999999999952, 180.000000000001), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.906307787036472, 1., 0.906307787036472, 1.))
   REPRESENTATION_ITEM ('')
);
#3260 = EDGE_CURVE ('', #3190, #2990, #3250, .T.);
#3270 = ORIENTED_EDGE ('', *, *, #3260, .T.);
#3280 = ORIENTED_EDGE ('', *, *, #3030, .T.);
#3290 = ORIENTED_EDGE ('', *, *, #1230, .F.);
#3300 = CARTESIAN_POINT ('', (10.509241891233, 5.4206458100453, 16.03));
#3310 = CARTESIAN_POINT ('', (10.551726368258, 4.9350460155867, 20.));
#3320 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3300, #3310), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3330 = EDGE_CURVE ('', #3190, #1090, #3320, .T.);
#3340 = ORIENTED_EDGE ('', *, *, #3330, .F.);
#3350 = EDGE_LOOP ('', (#3270, #3280, #3290, #3340));
#3360 = FACE_OUTER_BOUND ('', #3350, .T.);
#3370 = CARTESIAN_POINT ('', (10.1707681273738, 5.75923118985298, 16.029));
#3380 = CARTESIAN_POINT ('', (9.68492369825803, 5.80173706963783, 20.001));
#3390 = CARTESIAN_POINT ('', (10.1979975431667, 6.07046483653917, 16.029));
#3400 = CARTESIAN_POINT ('', (9.75465899383576, 6.5988151454398, 20.001));
#3410 = CARTESIAN_POINT ('', (10.5092311898529, 6.04323542074629, 16.029));
#3420 = CARTESIAN_POINT ('', (10.5517370696377, 6.52907984986208, 20.001));
#3430 = CARTESIAN_POINT ('', (10.8204648365391, 6.01600600495342, 16.029));
#3440 = CARTESIAN_POINT ('', (11.3488151454397, 6.45934455428435, 20.001));
#3450 = CARTESIAN_POINT ('', (10.7932354207462, 5.70477235826723, 16.029));
#3460 = CARTESIAN_POINT ('', (11.279079849862, 5.66226647848238, 20.001));
#3470 = CARTESIAN_POINT ('', (10.7660060049534, 5.39353871158104, 16.029));
#3480 = CARTESIAN_POINT ('', (11.2093445542843, 4.8651884026804, 20.001));
#3490 = CARTESIAN_POINT ('', (10.4547723582671, 5.42076812737391, 16.029));
#3500 = CARTESIAN_POINT ('', (10.4122664784823, 4.93492369825812, 20.001));
#3510 = CARTESIAN_POINT ('', (10.143538711581, 5.44799754316679, 16.029));
#3520 = CARTESIAN_POINT ('', (9.61518840268029, 5.00465899383585, 20.001));
#3530 = CARTESIAN_POINT ('', (10.1707681273738, 5.75923118985298, 16.029));
#3540 = CARTESIAN_POINT ('', (9.68492369825803, 5.80173706963783, 20.001));
#3550 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#3370, #3380), (#3390, #3400), (#3410, #3420), (#3430, #3440), (#3450, #3460), (#3470, #3480), (#3490, #3500), (#3510, #3520), (#3530, #3540)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#3560 = ADVANCED_FACE ('', (#3360), #3550, .T.);
#3570 = ORIENTED_EDGE ('', *, *, #2490, .T.);
#3580 = CARTESIAN_POINT ('', (18.432369180768, 6.1138296275526, 16.03));
#3590 = CARTESIAN_POINT ('', (10.509241891233, 5.4206458100453, 16.03));
#3600 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3580, #3590), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3610 = EDGE_CURVE ('', #2450, #3190, #3600, .T.);
#3620 = ORIENTED_EDGE ('', *, *, #3610, .T.);
#3630 = ORIENTED_EDGE ('', *, *, #3330, .T.);
#3640 = ORIENTED_EDGE ('', *, *, #1130, .F.);
#3650 = EDGE_LOOP ('', (#3570, #3620, #3630, #3640));
#3660 = FACE_OUTER_BOUND ('', #3650, .T.);
#3670 = CARTESIAN_POINT ('', (18.4325425873008, 6.12427763411596, 15.9453547050828));
#3680 = CARTESIAN_POINT ('', (18.4768339141496, 5.61802545167613, 20.0841974048141));
#3690 = CARTESIAN_POINT ('', (10.4650950821435, 5.42721630017678, 15.9453547050828));
#3700 = CARTESIAN_POINT ('', (10.5093864089922, 4.92096411773696, 20.0841974048141));
#3710 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3670, #3680), (#3690, #3700)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.043406161204345, 7.9544756990578), (-4.08509497337955, 0.084829712628391), .UNSPECIFIED.);
#3720 = ADVANCED_FACE ('', (#3660), #3710, .T.);
#3730 = ORIENTED_EDGE ('', *, *, #3080, .F.);
#3740 = ORIENTED_EDGE ('', *, *, #3260, .F.);
#3750 = ORIENTED_EDGE ('', *, *, #3610, .F.);
#3760 = ORIENTED_EDGE ('', *, *, #2580, .F.);
#3770 = ORIENTED_EDGE ('', *, *, #540, .F.);
#3780 = ORIENTED_EDGE ('', *, *, #1690, .F.);
#3790 = EDGE_LOOP ('', (#3730, #3740, #3750, #3760, #3770, #3780));
#3800 = FACE_OUTER_BOUND ('', #3790, .T.);
#3810 = CARTESIAN_POINT ('', (10.2252283371026, 4.62644467298033, 16.03));
#3820 = CARTESIAN_POINT ('', (9.37644467298041, 14.3280863476265, 16.03));
#3830 = CARTESIAN_POINT ('', (19.9268700117487, 5.47522833710253, 16.03));
#3840 = CARTESIAN_POINT ('', (19.0780863476265, 15.1768700117487, 16.03));
#3850 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3810, #3820), (#3830, #3840)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-5.07447559745691, 4.6642247722901), (-5.04147084291751, 4.69722952682963), .UNSPECIFIED.);
#3860 = ADVANCED_FACE ('', (#3800), #3850, .T.);
#3870 = CLOSED_SHELL ('', (#360, #920, #1580, #1920, #2270, #2430, #2670, #2830, #2950, #3170, #3560, #3720, #3860));
#3880 = MANIFOLD_SOLID_BREP ('NOCUT', #3870);
#3890 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#3900 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#3910 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#3920 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #3890, 'DISTANCE_ACCURACY_VALUE', '');
#3930 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#3920))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#3890, #3900, #3910))
   REPRESENTATION_CONTEXT ('', '3D')
);
#3940 = COLOUR_RGB ('', 0.75294117647059, 0.75294117647059, 0.75294117647059);
#3950 = FILL_AREA_STYLE_COLOUR ('', #3940);
#3960 = FILL_AREA_STYLE ('', (#3950));
#3970 = SURFACE_STYLE_FILL_AREA (#3960);
#3980 = SURFACE_SIDE_STYLE ('', (#3970));
#3990 = SURFACE_STYLE_USAGE (.POSITIVE., #3980);
#4000 = PRESENTATION_STYLE_ASSIGNMENT ((#3990));
#4010 = STYLED_ITEM ('', (#4000), #3880);
#4020 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#3880), #3930);
#4030 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#4040 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #4030);
#4050 = MECHANICAL_CONTEXT ('', #4030, 'mechanical');
#4060 = PRODUCT ('NONE', '', '', (#4050));
#4070 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#4080 = PERSON ('', '', $, $, $, $);
#4090 = ORGANIZATION ($, '', '');
#4100 = PERSON_AND_ORGANIZATION (#4080, #4090);
#4110 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#4100, #4070, (#4060));
#4120 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#4060));
#4130 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #4060, .NOT_KNOWN.);
#4140 = APPROVAL_STATUS ('approved');
#4150 = APPROVAL (#4140, '');
#4160 = CALENDAR_DATE (2018, 28, 6);
#4170 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#4180 = LOCAL_TIME (17, 2, 42., #4170);
#4190 = DATE_AND_TIME (#4160, #4180);
#4200 = APPROVAL_DATE_TIME (#4190, #4150);
#4210 = APPROVAL_ROLE ('');
#4220 = PERSON ('', '', $, $, $, $);
#4230 = ORGANIZATION ($, '', '');
#4240 = PERSON_AND_ORGANIZATION (#4220, #4230);
#4250 = APPROVAL_PERSON_ORGANIZATION (#4240, #4150, #4210);
#4260 = CC_DESIGN_APPROVAL (#4150, (#4130));
#4270 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#4280 = PERSON ('', '', $, $, $, $);
#4290 = ORGANIZATION ($, '', '');
#4300 = PERSON_AND_ORGANIZATION (#4280, #4290);
#4310 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#4300, #4270, (#4130));
#4320 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#4330 = PERSON ('', '', $, $, $, $);
#4340 = ORGANIZATION ($, '', '');
#4350 = PERSON_AND_ORGANIZATION (#4330, #4340);
#4360 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#4350, #4320, (#4130));
#4370 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#4380 = SECURITY_CLASSIFICATION ('', '', #4370);
#4390 = APPROVAL_STATUS ('approved');
#4400 = APPROVAL (#4390, '');
#4410 = CALENDAR_DATE (2018, 28, 6);
#4420 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#4430 = LOCAL_TIME (17, 2, 42., #4420);
#4440 = DATE_AND_TIME (#4410, #4430);
#4450 = APPROVAL_DATE_TIME (#4440, #4400);
#4460 = APPROVAL_ROLE ('');
#4470 = PERSON ('', '', $, $, $, $);
#4480 = ORGANIZATION ($, '', '');
#4490 = PERSON_AND_ORGANIZATION (#4470, #4480);
#4500 = APPROVAL_PERSON_ORGANIZATION (#4490, #4400, #4460);
#4510 = CC_DESIGN_APPROVAL (#4400, (#4380));
#4520 = DATE_TIME_ROLE ('classification_date');
#4530 = CALENDAR_DATE (2018, 28, 6);
#4540 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#4550 = LOCAL_TIME (17, 2, 42., #4540);
#4560 = DATE_AND_TIME (#4530, #4550);
#4570 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#4560, #4520, (#4380));
#4580 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#4590 = PERSON ('', '', $, $, $, $);
#4600 = ORGANIZATION ($, '', '');
#4610 = PERSON_AND_ORGANIZATION (#4590, #4600);
#4620 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#4610, #4580, (#4380));
#4630 = CC_DESIGN_SECURITY_CLASSIFICATION (#4380, (#4130));
#4640 = DESIGN_CONTEXT ('', #4030, 'design');
#4650 = PRODUCT_DEFINITION ('', '', #4130, #4640);
#4660 = APPROVAL_STATUS ('approved');
#4670 = APPROVAL (#4660, '');
#4680 = CALENDAR_DATE (2018, 28, 6);
#4690 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#4700 = LOCAL_TIME (17, 2, 42., #4690);
#4710 = DATE_AND_TIME (#4680, #4700);
#4720 = APPROVAL_DATE_TIME (#4710, #4670);
#4730 = APPROVAL_ROLE ('');
#4740 = PERSON ('', '', $, $, $, $);
#4750 = ORGANIZATION ($, '', '');
#4760 = PERSON_AND_ORGANIZATION (#4740, #4750);
#4770 = APPROVAL_PERSON_ORGANIZATION (#4760, #4670, #4730);
#4780 = CC_DESIGN_APPROVAL (#4670, (#4650));
#4790 = DATE_TIME_ROLE ('creation_date');
#4800 = CALENDAR_DATE (2018, 28, 6);
#4810 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#4820 = LOCAL_TIME (17, 2, 42., #4810);
#4830 = DATE_AND_TIME (#4800, #4820);
#4840 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#4830, #4790, (#4650));
#4850 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#4860 = PERSON ('', '', $, $, $, $);
#4870 = ORGANIZATION ($, '', '');
#4880 = PERSON_AND_ORGANIZATION (#4860, #4870);
#4890 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#4880, #4850, (#4650));
#4900 = PRODUCT_DEFINITION_SHAPE ('', '', #4650);
#4910 = SHAPE_DEFINITION_REPRESENTATION (#4900, #4020);
#4920 = CARTESIAN_POINT ('', (16.6087678399964, 8.32323393406374, 16.03));
#4930 = VERTEX_POINT ('', #4920);
#4940 = CARTESIAN_POINT ('', (16.4673464837591, 8.46465529030105, 16.23));
#4950 = VERTEX_POINT ('', #4940);
#4960 = CARTESIAN_POINT ('', (16.6087678399964, 8.32323393406374, 16.03));
#4970 = CARTESIAN_POINT ('', (16.4673464837591, 8.46465529030106, 16.23));
#4980 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4960, #4970), .UNSPECIFIED., .F., .U., (2, 2), (0.00495049504952094, 0.995049504950455), .UNSPECIFIED.);
#4990 = EDGE_CURVE ('', #4930, #4950, #4980, .T.);
#5000 = ORIENTED_EDGE ('', *, *, #4990, .T.);
#5010 = CARTESIAN_POINT ('', (13.214655290301, 11.7173464837591, 16.23));
#5020 = VERTEX_POINT ('', #5010);
#5030 = CARTESIAN_POINT ('', (16.4673464837591, 8.46465529030105, 16.23));
#5040 = CARTESIAN_POINT ('', (18.0936920804881, 10.0910008870301, 16.23));
#5050 = CARTESIAN_POINT ('', (16.4673464837591, 11.7173464837592, 16.23));
#5060 = CARTESIAN_POINT ('', (14.84100088703, 13.3436920804882, 16.23));
#5070 = CARTESIAN_POINT ('', (13.2146552903009, 11.7173464837591, 16.23));
#5080 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5030, #5040, #5050, #5060, #5070), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#5090 = EDGE_CURVE ('', #4950, #5020, #5080, .T.);
#5100 = ORIENTED_EDGE ('', *, *, #5090, .T.);
#5110 = CARTESIAN_POINT ('', (13.2146552903009, 11.7173464837591, 16.23));
#5120 = CARTESIAN_POINT ('', (11.5883096935719, 10.0910008870301, 16.23));
#5130 = CARTESIAN_POINT ('', (13.214655290301, 8.46465529030103, 16.23));
#5140 = CARTESIAN_POINT ('', (14.84100088703, 6.83830969357198, 16.23));
#5150 = CARTESIAN_POINT ('', (16.4673464837591, 8.46465529030105, 16.23));
#5160 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5110, #5120, #5130, #5140, #5150), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 90., 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#5170 = EDGE_CURVE ('', #5020, #4950, #5160, .T.);
#5180 = ORIENTED_EDGE ('', *, *, #5170, .T.);
#5190 = ORIENTED_EDGE ('', *, *, #4990, .F.);
#5200 = CARTESIAN_POINT ('', (13.073233934064, 11.8587678399964, 16.03));
#5210 = VERTEX_POINT ('', #5200);
#5220 = CARTESIAN_POINT ('', (13.0732339340636, 11.8587678399965, 16.03));
#5230 = CARTESIAN_POINT ('', (11.3054669810973, 10.0910008870301, 16.03));
#5240 = CARTESIAN_POINT ('', (13.0732339340636, 8.32323393406372, 16.03));
#5250 = CARTESIAN_POINT ('', (14.84100088703, 6.55546698109736, 16.03));
#5260 = CARTESIAN_POINT ('', (16.6087678399964, 8.32323393406374, 16.03));
#5270 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5220, #5230, #5240, #5250, #5260), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 90., 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#5280 = EDGE_CURVE ('', #5210, #4930, #5270, .T.);
#5290 = ORIENTED_EDGE ('', *, *, #5280, .F.);
#5300 = CARTESIAN_POINT ('', (16.6087678399964, 8.32323393406374, 16.03));
#5310 = CARTESIAN_POINT ('', (18.3765347929627, 10.0910008870301, 16.03));
#5320 = CARTESIAN_POINT ('', (16.6087678399964, 11.8587678399965, 16.03));
#5330 = CARTESIAN_POINT ('', (14.84100088703, 13.6265347929628, 16.03));
#5340 = CARTESIAN_POINT ('', (13.0732339340636, 11.8587678399965, 16.03));
#5350 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5300, #5310, #5320, #5330, #5340), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#5360 = EDGE_CURVE ('', #4930, #5210, #5350, .T.);
#5370 = ORIENTED_EDGE ('', *, *, #5360, .F.);
#5380 = EDGE_LOOP ('', (#5000, #5100, #5180, #5190, #5290, #5370));
#5390 = FACE_OUTER_BOUND ('', #5380, .T.);
#5400 = CARTESIAN_POINT ('', (16.4666393769779, 8.46536239708226, 16.231));
#5410 = CARTESIAN_POINT ('', (16.6094749467776, 8.32252682728256, 16.029));
#5420 = CARTESIAN_POINT ('', (18.0922778669257, 10.0910008870301, 16.2309999999998));
#5430 = CARTESIAN_POINT ('', (18.3779490065251, 10.0910008870301, 16.0289999999998));
#5440 = CARTESIAN_POINT ('', (16.4666393769779, 11.716639376978, 16.2309999999998));
#5450 = CARTESIAN_POINT ('', (16.6094749467775, 11.8594749467777, 16.0289999999998));
#5460 = CARTESIAN_POINT ('', (14.84100088703, 13.3422778669258, 16.2309999999998));
#5470 = CARTESIAN_POINT ('', (14.84100088703, 13.6279490065252, 16.0289999999998));
#5480 = CARTESIAN_POINT ('', (13.2153623970821, 11.716639376978, 16.231));
#5490 = CARTESIAN_POINT ('', (13.0725268272824, 11.8594749467776, 16.029));
#5500 = CARTESIAN_POINT ('', (11.5897239071343, 10.0910008870301, 16.2310000000002));
#5510 = CARTESIAN_POINT ('', (11.3040527675349, 10.0910008870301, 16.0290000000002));
#5520 = CARTESIAN_POINT ('', (13.2153623970821, 8.46536239708224, 16.2310000000002));
#5530 = CARTESIAN_POINT ('', (13.0725268272824, 8.32252682728254, 16.0290000000002));
#5540 = CARTESIAN_POINT ('', (14.84100088703, 6.83972390713438, 16.2310000000002));
#5550 = CARTESIAN_POINT ('', (14.84100088703, 6.55405276753499, 16.0290000000002));
#5560 = CARTESIAN_POINT ('', (16.4666393769779, 8.46536239708226, 16.231));
#5570 = CARTESIAN_POINT ('', (16.6094749467776, 8.32252682728256, 16.029));
#5580 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#5400, #5410), (#5420, #5430), (#5440, #5450), (#5460, #5470), (#5480, #5490), (#5500, #5510), (#5520, #5530), (#5540, #5550), (#5560, #5570)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#5590 = ADVANCED_FACE ('', (#5390), #5580, .T.);
#5600 = ORIENTED_EDGE ('', *, *, #5170, .F.);
#5610 = ORIENTED_EDGE ('', *, *, #5090, .F.);
#5620 = EDGE_LOOP ('', (#5600, #5610));
#5630 = FACE_OUTER_BOUND ('', #5620, .T.);
#5640 = CARTESIAN_POINT ('', (13.28536596842, 11.6466358056405, 16.23));
#5650 = VERTEX_POINT ('', #5640);
#5660 = CARTESIAN_POINT ('', (16.3966358056404, 8.5353659684197, 16.23));
#5670 = VERTEX_POINT ('', #5660);
#5680 = CARTESIAN_POINT ('', (13.2853659684196, 11.6466358056405, 16.23));
#5690 = CARTESIAN_POINT ('', (11.7297310498092, 10.0910008870301, 16.23));
#5700 = CARTESIAN_POINT ('', (13.2853659684196, 8.53536596841969, 16.23));
#5710 = CARTESIAN_POINT ('', (14.84100088703, 6.9797310498093, 16.23));
#5720 = CARTESIAN_POINT ('', (16.3966358056404, 8.5353659684197, 16.23));
#5730 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5680, #5690, #5700, #5710, #5720), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 90., 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#5740 = EDGE_CURVE ('', #5650, #5670, #5730, .T.);
#5750 = ORIENTED_EDGE ('', *, *, #5740, .T.);
#5760 = CARTESIAN_POINT ('', (16.3966358056404, 8.5353659684197, 16.23));
#5770 = CARTESIAN_POINT ('', (17.9522707242508, 10.0910008870301, 16.23));
#5780 = CARTESIAN_POINT ('', (16.3966358056404, 11.6466358056405, 16.23));
#5790 = CARTESIAN_POINT ('', (14.84100088703, 13.2022707242509, 16.23));
#5800 = CARTESIAN_POINT ('', (13.2853659684196, 11.6466358056405, 16.23));
#5810 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5760, #5770, #5780, #5790, #5800), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#5820 = EDGE_CURVE ('', #5670, #5650, #5810, .T.);
#5830 = ORIENTED_EDGE ('', *, *, #5820, .T.);
#5840 = EDGE_LOOP ('', (#5750, #5830));
#5850 = FACE_BOUND ('', #5840, .T.);
#5860 = CARTESIAN_POINT ('', (18.6596896269231, 6.886740573805, 16.23));
#5870 = CARTESIAN_POINT ('', (18.0452612002551, 13.9096896269232, 16.23));
#5880 = CARTESIAN_POINT ('', (11.6367405738049, 6.27231214713704, 16.23));
#5890 = CARTESIAN_POINT ('', (11.0223121471369, 13.2952612002552, 16.23));
#5900 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5860, #5870), (#5880, #5890)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.07861566699317, 4.97115991058313), (-5.24848778580583, 1.80128779177045), .UNSPECIFIED.);
#5910 = ADVANCED_FACE ('', (#5630, #5850), #5900, .T.);
#5920 = CARTESIAN_POINT ('', (16.3966358056404, 8.5353659684197, 17.782604820577));
#5930 = VERTEX_POINT ('', #5920);
#5940 = CARTESIAN_POINT ('', (16.3966358056404, 8.5353659684197, 17.782604820577));
#5950 = CARTESIAN_POINT ('', (16.3966358056404, 8.5353659684197, 16.23));
#5960 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5940, #5950), .UNSPECIFIED., .F., .U., (2, 2), (0.0838693752407721, 0.916130624759228), .UNSPECIFIED.);
#5970 = EDGE_CURVE ('', #5930, #5670, #5960, .T.);
#5980 = ORIENTED_EDGE ('', *, *, #5970, .T.);
#5990 = ORIENTED_EDGE ('', *, *, #5740, .F.);
#6000 = ORIENTED_EDGE ('', *, *, #5820, .F.);
#6010 = ORIENTED_EDGE ('', *, *, #5970, .F.);
#6020 = CARTESIAN_POINT ('', (13.28536596842, 11.6466358056405, 17.782604820577));
#6030 = VERTEX_POINT ('', #6020);
#6040 = CARTESIAN_POINT ('', (16.3966358056404, 8.5353659684197, 17.782604820577));
#6050 = CARTESIAN_POINT ('', (17.9522707242508, 10.0910008870301, 17.782604820577));
#6060 = CARTESIAN_POINT ('', (16.3966358056404, 11.6466358056405, 17.782604820577));
#6070 = CARTESIAN_POINT ('', (14.84100088703, 13.2022707242509, 17.782604820577));
#6080 = CARTESIAN_POINT ('', (13.2853659684196, 11.6466358056405, 17.782604820577));
#6090 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#6040, #6050, #6060, #6070, #6080), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#6100 = EDGE_CURVE ('', #5930, #6030, #6090, .T.);
#6110 = ORIENTED_EDGE ('', *, *, #6100, .T.);
#6120 = CARTESIAN_POINT ('', (12.6493725512282, 9.89925825298526, 17.782604820577));
#6130 = VERTEX_POINT ('', #6120);
#6140 = CARTESIAN_POINT ('', (13.2853659684196, 11.6466358056405, 17.782604820577));
#6150 = CARTESIAN_POINT ('', (12.5599614925782, 10.9212313297991, 17.782604820577));
#6160 = CARTESIAN_POINT ('', (12.6493725512282, 9.89925825298526, 17.782604820577));
#6170 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#6140, #6150, #6160), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 49.7433078232074), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.838116916191471, 0.85518050058867))
   REPRESENTATION_ITEM ('')
);
#6180 = EDGE_CURVE ('', #6030, #6130, #6170, .T.);
#6190 = ORIENTED_EDGE ('', *, *, #6180, .T.);
#6200 = CARTESIAN_POINT ('', (12.6493725512282, 9.89925825298526, 17.782604820577));
#6210 = CARTESIAN_POINT ('', (12.7191611626603, 9.10157077417901, 17.782604820577));
#6220 = CARTESIAN_POINT ('', (13.2853659684196, 8.53536596841969, 17.782604820577));
#6230 = CARTESIAN_POINT ('', (14.84100088703, 6.9797310498093, 17.782604820577));
#6240 = CARTESIAN_POINT ('', (16.3966358056404, 8.5353659684197, 17.782604820577));
#6250 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#6200, #6210, #6220, #6230, #6240), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (49.7433078232074, 90., 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.85518050058867, 0.868989864995076, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#6260 = EDGE_CURVE ('', #6130, #5930, #6250, .T.);
#6270 = ORIENTED_EDGE ('', *, *, #6260, .T.);
#6280 = EDGE_LOOP ('', (#5980, #5990, #6000, #6010, #6110, #6190, #6270));
#6290 = FACE_OUTER_BOUND ('', #6280, .T.);
#6300 = CARTESIAN_POINT ('', (16.3966358056404, 8.5353659684197, 16.0735395179423));
#6310 = CARTESIAN_POINT ('', (16.3966358056404, 8.5353659684197, 17.9390653026347));
#6320 = CARTESIAN_POINT ('', (14.84100088703, 6.97973104980931, 16.0735395179423));
#6330 = CARTESIAN_POINT ('', (14.84100088703, 6.97973104980931, 17.9390653026347));
#6340 = CARTESIAN_POINT ('', (13.2853659684196, 8.53536596841972, 16.0735395179423));
#6350 = CARTESIAN_POINT ('', (13.2853659684196, 8.53536596841971, 17.9390653026347));
#6360 = CARTESIAN_POINT ('', (11.7297310498092, 10.0910008870301, 16.0735395179423));
#6370 = CARTESIAN_POINT ('', (11.7297310498092, 10.0910008870301, 17.9390653026347));
#6380 = CARTESIAN_POINT ('', (13.2853659684196, 11.6466358056405, 16.0735395179423));
#6390 = CARTESIAN_POINT ('', (13.2853659684196, 11.6466358056405, 17.9390653026347));
#6400 = CARTESIAN_POINT ('', (14.84100088703, 13.2022707242509, 16.0735395179423));
#6410 = CARTESIAN_POINT ('', (14.84100088703, 13.2022707242509, 17.9390653026347));
#6420 = CARTESIAN_POINT ('', (16.3966358056404, 11.6466358056405, 16.0735395179423));
#6430 = CARTESIAN_POINT ('', (16.3966358056404, 11.6466358056405, 17.9390653026347));
#6440 = CARTESIAN_POINT ('', (17.9522707242508, 10.0910008870301, 16.0735395179423));
#6450 = CARTESIAN_POINT ('', (17.9522707242508, 10.0910008870301, 17.9390653026347));
#6460 = CARTESIAN_POINT ('', (16.3966358056404, 8.5353659684197, 16.0735395179423));
#6470 = CARTESIAN_POINT ('', (16.3966358056404, 8.5353659684197, 17.9390653026347));
#6480 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#6300, #6310), (#6320, #6330), (#6340, #6350), (#6360, #6370), (#6380, #6390), (#6400, #6410), (#6420, #6430), (#6440, #6450), (#6460, #6470)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.499999999999999, 0.749999999999999, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#6490 = ADVANCED_FACE ('', (#6290), #6480, .T.);
#6500 = CARTESIAN_POINT ('', (12.0280727960671, 9.84490156775723, 19.));
#6510 = VERTEX_POINT ('', #6500);
#6520 = CARTESIAN_POINT ('', (12.6493725512282, 9.89925825298525, 17.782604820577));
#6530 = CARTESIAN_POINT ('', (12.6493725512282, 9.89925825298525, 18.5510566304328));
#6540 = CARTESIAN_POINT ('', (12.0280727960671, 9.84490156775722, 19.));
#6550 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#6520, #6530, #6540), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0.5, 0.649418836533371), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.824944944065519, 0.859142070427153))
   REPRESENTATION_ITEM ('')
);
#6560 = EDGE_CURVE ('', #6130, #6510, #6550, .T.);
#6570 = ORIENTED_EDGE ('', *, *, #6560, .T.);
#6580 = CARTESIAN_POINT ('', (16.8376392268246, 8.09436254723557, 19.));
#6590 = VERTEX_POINT ('', #6580);
#6600 = CARTESIAN_POINT ('', (12.0280727960671, 9.84490156775723, 19.));
#6610 = CARTESIAN_POINT ('', (12.1176456229556, 8.82107947151545, 19.));
#6620 = CARTESIAN_POINT ('', (12.8443625472355, 8.09436254723555, 19.));
#6630 = CARTESIAN_POINT ('', (14.84100088703, 6.09772420744102, 19.));
#6640 = CARTESIAN_POINT ('', (16.8376392268246, 8.09436254723557, 19.));
#6650 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#6600, #6610, #6620, #6630, #6640), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (49.7433078232073, 90., 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.85518050058867, 0.868989864995076, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#6660 = EDGE_CURVE ('', #6510, #6590, #6650, .T.);
#6670 = ORIENTED_EDGE ('', *, *, #6660, .T.);
#6680 = CARTESIAN_POINT ('', (12.844362547236, 12.0876392268246, 19.));
#6690 = VERTEX_POINT ('', #6680);
#6700 = CARTESIAN_POINT ('', (16.8376392268246, 8.09436254723557, 19.));
#6710 = CARTESIAN_POINT ('', (18.8342775666191, 10.0910008870301, 19.));
#6720 = CARTESIAN_POINT ('', (16.8376392268245, 12.0876392268246, 19.));
#6730 = CARTESIAN_POINT ('', (14.84100088703, 14.0842775666192, 19.));
#6740 = CARTESIAN_POINT ('', (12.8443625472354, 12.0876392268246, 19.));
#6750 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#6700, #6710, #6720, #6730, #6740), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#6760 = EDGE_CURVE ('', #6590, #6690, #6750, .T.);
#6770 = ORIENTED_EDGE ('', *, *, #6760, .T.);
#6780 = CARTESIAN_POINT ('', (12.8443625472354, 12.0876392268246, 19.));
#6790 = CARTESIAN_POINT ('', (11.9133147988234, 11.1565914784126, 19.));
#6800 = CARTESIAN_POINT ('', (12.0280727960671, 9.84490156775723, 19.));
#6810 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#6780, #6790, #6800), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 49.7433078232073), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.838116916191471, 0.85518050058867))
   REPRESENTATION_ITEM ('')
);
#6820 = EDGE_CURVE ('', #6690, #6510, #6810, .T.);
#6830 = ORIENTED_EDGE ('', *, *, #6820, .T.);
#6840 = ORIENTED_EDGE ('', *, *, #6560, .F.);
#6850 = ORIENTED_EDGE ('', *, *, #6180, .F.);
#6860 = ORIENTED_EDGE ('', *, *, #6100, .F.);
#6870 = ORIENTED_EDGE ('', *, *, #6260, .F.);
#6880 = EDGE_LOOP ('', (#6570, #6670, #6770, #6830, #6840, #6850, #6860, #6870));
#6890 = FACE_OUTER_BOUND ('', #6880, .T.);
#6900 = CARTESIAN_POINT ('', (9.66078845695293, 9.63779102474227, 17.782604820577));
#6910 = CARTESIAN_POINT ('', (9.66078845695293, 9.63779102474227, 19.282604820577));
#6920 = CARTESIAN_POINT ('', (11.1550805040905, 9.76852463886376, 19.282604820577));
#6930 = CARTESIAN_POINT ('', (12.6493725512282, 9.89925825298525, 19.282604820577));
#6940 = CARTESIAN_POINT ('', (12.6493725512282, 9.89925825298525, 17.782604820577));
#6950 = CARTESIAN_POINT ('', (12.6493725512282, 9.89925825298525, 16.282604820577));
#6960 = CARTESIAN_POINT ('', (11.1550805040905, 9.76852463886376, 16.282604820577));
#6970 = CARTESIAN_POINT ('', (9.66078845695293, 9.63779102474227, 16.282604820577));
#6980 = CARTESIAN_POINT ('', (9.66078845695293, 9.63779102474227, 17.782604820577));
#6990 = CARTESIAN_POINT ('', (10.1139983192408, 4.45757859466518, 17.782604820577));
#7000 = CARTESIAN_POINT ('', (10.1139983192408, 4.45757859466518, 19.282604820577));
#7010 = CARTESIAN_POINT ('', (11.4775567522569, 6.08260425592429, 19.282604820577));
#7020 = CARTESIAN_POINT ('', (12.841115185273, 7.7076299171834, 19.282604820577));
#7030 = CARTESIAN_POINT ('', (12.841115185273, 7.7076299171834, 17.782604820577));
#7040 = CARTESIAN_POINT ('', (12.841115185273, 7.7076299171834, 16.282604820577));
#7050 = CARTESIAN_POINT ('', (11.4775567522569, 6.08260425592429, 16.282604820577));
#7060 = CARTESIAN_POINT ('', (10.1139983192408, 4.45757859466518, 16.282604820577));
#7070 = CARTESIAN_POINT ('', (10.1139983192408, 4.45757859466518, 17.782604820577));
#7080 = CARTESIAN_POINT ('', (15.2942107493178, 4.910788456953, 17.782604820577));
#7090 = CARTESIAN_POINT ('', (15.2942107493178, 4.910788456953, 19.282604820577));
#7100 = CARTESIAN_POINT ('', (15.1634771351964, 6.40508050409062, 19.282604820577));
#7110 = CARTESIAN_POINT ('', (15.0327435210749, 7.89937255122824, 19.282604820577));
#7120 = CARTESIAN_POINT ('', (15.0327435210749, 7.89937255122824, 17.782604820577));
#7130 = CARTESIAN_POINT ('', (15.0327435210749, 7.89937255122824, 16.282604820577));
#7140 = CARTESIAN_POINT ('', (15.1634771351964, 6.40508050409062, 16.282604820577));
#7150 = CARTESIAN_POINT ('', (15.2942107493178, 4.910788456953, 16.282604820577));
#7160 = CARTESIAN_POINT ('', (15.2942107493178, 4.910788456953, 17.782604820577));
#7170 = CARTESIAN_POINT ('', (20.4744231793949, 5.36399831924082, 17.782604820577));
#7180 = CARTESIAN_POINT ('', (20.4744231793949, 5.36399831924082, 19.282604820577));
#7190 = CARTESIAN_POINT ('', (18.8493975181358, 6.72755675225696, 19.282604820577));
#7200 = CARTESIAN_POINT ('', (17.2243718568767, 8.09111518527309, 19.282604820577));
#7210 = CARTESIAN_POINT ('', (17.2243718568767, 8.09111518527309, 17.782604820577));
#7220 = CARTESIAN_POINT ('', (17.2243718568767, 8.09111518527309, 16.282604820577));
#7230 = CARTESIAN_POINT ('', (18.8493975181358, 6.72755675225696, 16.282604820577));
#7240 = CARTESIAN_POINT ('', (20.4744231793949, 5.36399831924082, 16.282604820577));
#7250 = CARTESIAN_POINT ('', (20.4744231793949, 5.36399831924082, 17.782604820577));
#7260 = CARTESIAN_POINT ('', (20.0212133171071, 10.5442107493179, 17.782604820577));
#7270 = CARTESIAN_POINT ('', (20.0212133171071, 10.5442107493179, 19.282604820577));
#7280 = CARTESIAN_POINT ('', (18.5269212699695, 10.4134771351964, 19.282604820577));
#7290 = CARTESIAN_POINT ('', (17.0326292228319, 10.2827435210749, 19.282604820577));
#7300 = CARTESIAN_POINT ('', (17.0326292228319, 10.2827435210749, 17.782604820577));
#7310 = CARTESIAN_POINT ('', (17.0326292228319, 10.2827435210749, 16.282604820577));
#7320 = CARTESIAN_POINT ('', (18.5269212699695, 10.4134771351964, 16.282604820577));
#7330 = CARTESIAN_POINT ('', (20.0212133171071, 10.5442107493179, 16.282604820577));
#7340 = CARTESIAN_POINT ('', (20.0212133171071, 10.5442107493179, 17.782604820577));
#7350 = CARTESIAN_POINT ('', (19.5680034548193, 15.724423179395, 17.782604820577));
#7360 = CARTESIAN_POINT ('', (19.5680034548193, 15.724423179395, 19.282604820577));
#7370 = CARTESIAN_POINT ('', (18.2044450218032, 14.0993975181359, 19.282604820577));
#7380 = CARTESIAN_POINT ('', (16.840886588787, 12.4743718568768, 19.282604820577));
#7390 = CARTESIAN_POINT ('', (16.840886588787, 12.4743718568768, 17.782604820577));
#7400 = CARTESIAN_POINT ('', (16.840886588787, 12.4743718568768, 16.282604820577));
#7410 = CARTESIAN_POINT ('', (18.2044450218032, 14.0993975181359, 16.282604820577));
#7420 = CARTESIAN_POINT ('', (19.5680034548193, 15.724423179395, 16.282604820577));
#7430 = CARTESIAN_POINT ('', (19.5680034548193, 15.724423179395, 17.782604820577));
#7440 = CARTESIAN_POINT ('', (14.3877910247422, 15.2712133171072, 17.782604820577));
#7450 = CARTESIAN_POINT ('', (14.3877910247422, 15.2712133171072, 19.282604820577));
#7460 = CARTESIAN_POINT ('', (14.5185246388637, 13.7769212699696, 19.282604820577));
#7470 = CARTESIAN_POINT ('', (14.6492582529852, 12.2826292228319, 19.282604820577));
#7480 = CARTESIAN_POINT ('', (14.6492582529852, 12.2826292228319, 17.782604820577));
#7490 = CARTESIAN_POINT ('', (14.6492582529852, 12.2826292228319, 16.282604820577));
#7500 = CARTESIAN_POINT ('', (14.5185246388637, 13.7769212699696, 16.282604820577));
#7510 = CARTESIAN_POINT ('', (14.3877910247422, 15.2712133171072, 16.282604820577));
#7520 = CARTESIAN_POINT ('', (14.3877910247422, 15.2712133171072, 17.782604820577));
#7530 = CARTESIAN_POINT ('', (9.20757859466512, 14.8180034548194, 17.782604820577));
#7540 = CARTESIAN_POINT ('', (9.20757859466512, 14.8180034548194, 19.282604820577));
#7550 = CARTESIAN_POINT ('', (10.8326042559242, 13.4544450218032, 19.282604820577));
#7560 = CARTESIAN_POINT ('', (12.4576299171833, 12.0908865887871, 19.282604820577));
#7570 = CARTESIAN_POINT ('', (12.4576299171833, 12.0908865887871, 17.782604820577));
#7580 = CARTESIAN_POINT ('', (12.4576299171833, 12.0908865887871, 16.282604820577));
#7590 = CARTESIAN_POINT ('', (10.8326042559242, 13.4544450218032, 16.282604820577));
#7600 = CARTESIAN_POINT ('', (9.20757859466512, 14.8180034548194, 16.282604820577));
#7610 = CARTESIAN_POINT ('', (9.20757859466512, 14.8180034548194, 17.782604820577));
#7620 = CARTESIAN_POINT ('', (9.66078845695293, 9.63779102474227, 17.782604820577));
#7630 = CARTESIAN_POINT ('', (9.66078845695293, 9.63779102474227, 19.282604820577));
#7640 = CARTESIAN_POINT ('', (11.1550805040905, 9.76852463886376, 19.282604820577));
#7650 = CARTESIAN_POINT ('', (12.6493725512282, 9.89925825298525, 19.282604820577));
#7660 = CARTESIAN_POINT ('', (12.6493725512282, 9.89925825298525, 17.782604820577));
#7670 = CARTESIAN_POINT ('', (12.6493725512282, 9.89925825298525, 16.282604820577));
#7680 = CARTESIAN_POINT ('', (11.1550805040905, 9.76852463886376, 16.282604820577));
#7690 = CARTESIAN_POINT ('', (9.66078845695293, 9.63779102474227, 16.282604820577));
#7700 = CARTESIAN_POINT ('', (9.66078845695293, 9.63779102474227, 17.782604820577));
#7710 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 2, ((#6900, #6910, #6920, #6930, #6940, #6950, #6960, #6970, #6980), (#6990, #7000, #7010, #7020, #7030, #7040, #7050, #7060, #7070), (#7080, #7090, #7100, #7110, #7120, #7130, #7140, #7150, #7160), (#7170, #7180, #7190, #7200, #7210, #7220, #7230, #7240, #7250), (#7260, #7270, #7280, #7290, #7300, #7310, #7320, #7330, #7340), (#7350, #7360, #7370, #7380, #7390, #7400, #7410, #7420, #7430), (#7440, #7450, #7460, #7470, #7480, #7490, #7500, #7510, #7520), (#7530, #7540, #7550, #7560, #7570, #7580, #7590, #7600, #7610), (#7620, #7630, #7640, #7650, #7660, #7670, #7680, #7690, #7700)), .UNSPECIFIED., .T., .T., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (3, 2, 2, 2, 3), (0., 0.25, 0.5, 0.75, 1.), (0., 0.25, 0.5, 0.75, 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.), (0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548), (1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.), (0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548), (1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.), (0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548), (1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.), (0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548), (1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.)))
   REPRESENTATION_ITEM ('')
);
#7720 = ADVANCED_FACE ('', (#6890), #7710, .T.);
#7730 = CARTESIAN_POINT ('', (16.9623212305897, 7.96968054347046, 20.));
#7740 = VERTEX_POINT ('', #7730);
#7750 = CARTESIAN_POINT ('', (16.9623212305897, 7.96968054347046, 20.));
#7760 = CARTESIAN_POINT ('', (16.8376392268246, 8.09436254723557, 19.));
#7770 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7750, #7760), .UNSPECIFIED., .F., .U., (2, 2), (0.000998003992017882, 0.999001996007982), .UNSPECIFIED.);
#7780 = EDGE_CURVE ('', #7740, #6590, #7770, .T.);
#7790 = ORIENTED_EDGE ('', *, *, #7780, .T.);
#7800 = ORIENTED_EDGE ('', *, *, #6660, .F.);
#7810 = ORIENTED_EDGE ('', *, *, #6820, .F.);
#7820 = ORIENTED_EDGE ('', *, *, #6760, .F.);
#7830 = ORIENTED_EDGE ('', *, *, #7780, .F.);
#7840 = CARTESIAN_POINT ('', (12.71968054347, 12.2123212305897, 20.));
#7850 = VERTEX_POINT ('', #7840);
#7860 = CARTESIAN_POINT ('', (12.7196805434704, 12.2123212305897, 20.));
#7870 = CARTESIAN_POINT ('', (14.84100088703, 14.3336415741494, 20.));
#7880 = CARTESIAN_POINT ('', (16.9623212305896, 12.2123212305897, 20.));
#7890 = CARTESIAN_POINT ('', (19.0836415741493, 10.0910008870301, 20.));
#7900 = CARTESIAN_POINT ('', (16.9623212305897, 7.96968054347046, 20.));
#7910 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#7860, #7870, #7880, #7890, #7900), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 90., 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#7920 = EDGE_CURVE ('', #7850, #7740, #7910, .T.);
#7930 = ORIENTED_EDGE ('', *, *, #7920, .F.);
#7940 = CARTESIAN_POINT ('', (16.9623212305897, 7.96968054347046, 20.));
#7950 = CARTESIAN_POINT ('', (14.84100088703, 5.84836019991082, 20.));
#7960 = CARTESIAN_POINT ('', (12.7196805434704, 7.96968054347045, 20.));
#7970 = CARTESIAN_POINT ('', (10.5983601999107, 10.0910008870301, 20.));
#7980 = CARTESIAN_POINT ('', (12.7196805434704, 12.2123212305897, 20.));
#7990 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#7940, #7950, #7960, #7970, #7980), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#8000 = EDGE_CURVE ('', #7740, #7850, #7990, .T.);
#8010 = ORIENTED_EDGE ('', *, *, #8000, .F.);
#8020 = EDGE_LOOP ('', (#7790, #7800, #7810, #7820, #7830, #7930, #8010));
#8030 = FACE_OUTER_BOUND ('', #8020, .T.);
#8040 = CARTESIAN_POINT ('', (16.8375145448208, 8.09448722923933, 18.999));
#8050 = CARTESIAN_POINT ('', (16.9624459125934, 7.9695558614667, 20.001));
#8060 = CARTESIAN_POINT ('', (14.84100088703, 6.09797357144856, 18.999));
#8070 = CARTESIAN_POINT ('', (14.84100088703, 5.84811083590329, 20.001));
#8080 = CARTESIAN_POINT ('', (12.8444872292392, 8.09448722923933, 18.999));
#8090 = CARTESIAN_POINT ('', (12.7195558614666, 7.9695558614667, 20.001));
#8100 = CARTESIAN_POINT ('', (10.8479735714485, 10.0910008870301, 18.999));
#8110 = CARTESIAN_POINT ('', (10.5981108359032, 10.0910008870301, 20.001));
#8120 = CARTESIAN_POINT ('', (12.8444872292392, 12.0875145448209, 18.999));
#8130 = CARTESIAN_POINT ('', (12.7195558614666, 12.2124459125935, 20.001));
#8140 = CARTESIAN_POINT ('', (14.84100088703, 14.0840282026116, 18.999));
#8150 = CARTESIAN_POINT ('', (14.84100088703, 14.3338909381569, 20.001));
#8160 = CARTESIAN_POINT ('', (16.8375145448208, 12.0875145448209, 18.999));
#8170 = CARTESIAN_POINT ('', (16.9624459125934, 12.2124459125935, 20.001));
#8180 = CARTESIAN_POINT ('', (18.8340282026116, 10.0910008870301, 18.999));
#8190 = CARTESIAN_POINT ('', (19.0838909381568, 10.0910008870301, 20.001));
#8200 = CARTESIAN_POINT ('', (16.8375145448208, 8.09448722923933, 18.999));
#8210 = CARTESIAN_POINT ('', (16.9624459125934, 7.9695558614667, 20.001));
#8220 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#8040, #8050), (#8060, #8070), (#8080, #8090), (#8100, #8110), (#8120, #8130), (#8140, #8150), (#8160, #8170), (#8180, #8190), (#8200, #8210)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#8230 = ADVANCED_FACE ('', (#8030), #8220, .T.);
#8240 = CARTESIAN_POINT ('', (19.172759882828, 14.7613559640148, 16.03));
#8250 = VERTEX_POINT ('', #8240);
#8260 = CARTESIAN_POINT ('', (11.156126221862, 14.05999139904, 16.03));
#8270 = VERTEX_POINT ('', #8260);
#8280 = CARTESIAN_POINT ('', (19.172759882828, 14.7613559640148, 16.03));
#8290 = CARTESIAN_POINT ('', (11.156126221862, 14.05999139904, 16.03));
#8300 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8280, #8290), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#8310 = EDGE_CURVE ('', #8250, #8270, #8300, .T.);
#8320 = ORIENTED_EDGE ('', *, *, #8310, .T.);
#8330 = CARTESIAN_POINT ('', (11.113641744837, 14.5455911934986, 20.));
#8340 = VERTEX_POINT ('', #8330);
#8350 = CARTESIAN_POINT ('', (11.113641744837, 14.5455911934986, 20.));
#8360 = CARTESIAN_POINT ('', (11.156126221862, 14.05999139904, 16.03));
#8370 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8350, #8360), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#8380 = EDGE_CURVE ('', #8340, #8270, #8370, .T.);
#8390 = ORIENTED_EDGE ('', *, *, #8380, .F.);
#8400 = CARTESIAN_POINT ('', (19.130275405802, 15.2469557584734, 20.));
#8410 = VERTEX_POINT ('', #8400);
#8420 = CARTESIAN_POINT ('', (11.113641744837, 14.5455911934986, 20.));
#8430 = CARTESIAN_POINT ('', (19.130275405802, 15.2469557584734, 20.));
#8440 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8420, #8430), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#8450 = EDGE_CURVE ('', #8340, #8410, #8440, .T.);
#8460 = ORIENTED_EDGE ('', *, *, #8450, .T.);
#8470 = CARTESIAN_POINT ('', (19.130275405802, 15.2469557584734, 20.));
#8480 = CARTESIAN_POINT ('', (19.172759882828, 14.7613559640148, 16.03));
#8490 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8470, #8480), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#8500 = EDGE_CURVE ('', #8410, #8250, #8490, .T.);
#8510 = ORIENTED_EDGE ('', *, *, #8500, .T.);
#8520 = EDGE_LOOP ('', (#8320, #8390, #8460, #8510));
#8530 = FACE_OUTER_BOUND ('', #8520, .T.);
#8540 = CARTESIAN_POINT ('', (19.2169172411815, 14.7546648952434, 15.9443689196556));
#8550 = CARTESIAN_POINT ('', (19.1726000227627, 15.2612130196841, 20.0856310803444));
#8560 = CARTESIAN_POINT ('', (11.1138016049023, 14.0457341378293, 15.9443689196556));
#8570 = CARTESIAN_POINT ('', (11.0694843864835, 14.55228226227, 20.0856310803444));
#8580 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#8540, #8550), (#8560, #8570)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.043406161205354, 8.09066206039941), (-4.08608816188326, 0.086274154811619), .UNSPECIFIED.);
#8590 = ADVANCED_FACE ('', (#8530), #8580, .T.);
#8600 = CARTESIAN_POINT ('', (10.87201037502, 13.7758755521977, 16.03));
#8610 = VERTEX_POINT ('', #8600);
#8620 = CARTESIAN_POINT ('', (11.156126221862, 14.0599913990399, 16.03));
#8630 = CARTESIAN_POINT ('', (10.8948675472928, 14.0371342267669, 16.03));
#8640 = CARTESIAN_POINT ('', (10.8720103750202, 13.7758755521977, 16.03));
#8650 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#8620, #8630, #8640), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (180.000000000094, 260.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.766044443119503, 1.))
   REPRESENTATION_ITEM ('')
);
#8660 = EDGE_CURVE ('', #8270, #8610, #8650, .T.);
#8670 = ORIENTED_EDGE ('', *, *, #8660, .T.);
#8680 = CARTESIAN_POINT ('', (10.386410580562, 13.8183600292234, 20.));
#8690 = VERTEX_POINT ('', #8680);
#8700 = CARTESIAN_POINT ('', (10.386410580562, 13.8183600292234, 20.));
#8710 = CARTESIAN_POINT ('', (10.87201037502, 13.7758755521977, 16.03));
#8720 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8700, #8710), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#8730 = EDGE_CURVE ('', #8690, #8610, #8720, .T.);
#8740 = ORIENTED_EDGE ('', *, *, #8730, .F.);
#8750 = CARTESIAN_POINT ('', (10.3864105805616, 13.8183600292234, 20.));
#8760 = CARTESIAN_POINT ('', (10.4449164618373, 14.4870853122231, 20.));
#8770 = CARTESIAN_POINT ('', (11.113641744837, 14.5455911934986, 20.));
#8780 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#8750, #8760, #8770), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (100.000000000008, 180.000000000008), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.766044443118975, 1.))
   REPRESENTATION_ITEM ('')
);
#8790 = EDGE_CURVE ('', #8690, #8340, #8780, .T.);
#8800 = ORIENTED_EDGE ('', *, *, #8790, .T.);
#8810 = ORIENTED_EDGE ('', *, *, #8380, .T.);
#8820 = EDGE_LOOP ('', (#8670, #8740, #8800, #8810));
#8830 = FACE_OUTER_BOUND ('', #8820, .T.);
#8840 = CARTESIAN_POINT ('', (11.3841876565853, 13.9879649616854, 16.029));
#8850 = CARTESIAN_POINT ('', (11.6976753511784, 14.3615650479511, 20.001));
#8860 = CARTESIAN_POINT ('', (11.1648825504437, 14.1719837953639, 16.029));
#8870 = CARTESIAN_POINT ('', (11.136028839376, 14.8328424288563, 20.001));
#8880 = CARTESIAN_POINT ('', (10.96245026457, 13.9695515094901, 16.029));
#8890 = CARTESIAN_POINT ('', (10.6175940922899, 14.3144076817699, 20.001));
#8900 = CARTESIAN_POINT ('', (10.7600179786963, 13.7671192236162, 16.029));
#8910 = CARTESIAN_POINT ('', (10.0991593452039, 13.7959729346835, 20.001));
#8920 = CARTESIAN_POINT ('', (10.9440368123749, 13.5478141174748, 16.029));
#8930 = CARTESIAN_POINT ('', (10.5704367261094, 13.2343264228814, 20.001));
#8940 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#8840, #8850), (#8860, #8870), (#8880, #8890), (#8900, #8910), (#8920, #8930)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 3), (2, 2), (0., 0.5, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.737277336810136, 0.737277336810136), (1., 1.), (0.737277336810136, 0.737277336810136), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#8950 = ADVANCED_FACE ('', (#8830), #8940, .T.);
#8960 = CARTESIAN_POINT ('', (10.170645810045, 5.7592418912326, 16.03));
#8970 = VERTEX_POINT ('', #8960);
#8980 = CARTESIAN_POINT ('', (10.87201037502, 13.7758755521977, 16.03));
#8990 = CARTESIAN_POINT ('', (10.170645810045, 5.7592418912326, 16.03));
#9000 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8980, #8990), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9010 = EDGE_CURVE ('', #8610, #8970, #9000, .T.);
#9020 = ORIENTED_EDGE ('', *, *, #9010, .T.);
#9030 = CARTESIAN_POINT ('', (9.68504601558701, 5.8017263682583, 20.));
#9040 = VERTEX_POINT ('', #9030);
#9050 = CARTESIAN_POINT ('', (9.68504601558701, 5.8017263682583, 20.));
#9060 = CARTESIAN_POINT ('', (10.170645810045, 5.7592418912326, 16.03));
#9070 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9050, #9060), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9080 = EDGE_CURVE ('', #9040, #8970, #9070, .T.);
#9090 = ORIENTED_EDGE ('', *, *, #9080, .F.);
#9100 = CARTESIAN_POINT ('', (9.68504601558701, 5.8017263682583, 20.));
#9110 = CARTESIAN_POINT ('', (10.386410580562, 13.8183600292234, 20.));
#9120 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9100, #9110), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9130 = EDGE_CURVE ('', #9040, #8690, #9120, .T.);
#9140 = ORIENTED_EDGE ('', *, *, #9130, .T.);
#9150 = ORIENTED_EDGE ('', *, *, #8730, .T.);
#9160 = EDGE_LOOP ('', (#9020, #9090, #9140, #9150));
#9170 = FACE_OUTER_BOUND ('', #9160, .T.);
#9180 = CARTESIAN_POINT ('', (10.8862676362313, 13.818200169158, 15.9443689196557));
#9190 = CARTESIAN_POINT ('', (10.3797195117906, 13.8625173875769, 20.0856310803444));
#9200 = CARTESIAN_POINT ('', (10.1773368788173, 5.71508453287904, 15.9443689196557));
#9210 = CARTESIAN_POINT ('', (9.67078875437653, 5.75940175129792, 20.0856310803444));
#9220 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#9180, #9190), (#9200, #9210)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.0434061612049419, 8.09066206039957), (-4.08608816188317, 0.0862741548116475), .UNSPECIFIED.);
#9230 = ADVANCED_FACE ('', (#9170), #9220, .T.);
#9240 = CARTESIAN_POINT ('', (10.509241891233, 5.4206458100453, 16.03));
#9250 = VERTEX_POINT ('', #9240);
#9260 = CARTESIAN_POINT ('', (10.1706458100452, 5.75924189123258, 16.03));
#9270 = CARTESIAN_POINT ('', (10.1579435347986, 5.61405422080011, 16.03));
#9280 = CARTESIAN_POINT ('', (10.2609988777996, 5.51099887779932, 16.03));
#9290 = CARTESIAN_POINT ('', (10.3640542208005, 5.40794353479854, 16.03));
#9300 = CARTESIAN_POINT ('', (10.509241891233, 5.42064581004537, 16.03));
#9310 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#9260, #9270, #9280, #9290, #9300), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (179.999999999999, 230.000000000048, 280.000000000096), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.906307787036472, 1., 0.906307787036472, 1.))
   REPRESENTATION_ITEM ('')
);
#9320 = EDGE_CURVE ('', #8970, #9250, #9310, .T.);
#9330 = ORIENTED_EDGE ('', *, *, #9320, .T.);
#9340 = CARTESIAN_POINT ('', (10.551726368258, 4.9350460155867, 20.));
#9350 = VERTEX_POINT ('', #9340);
#9360 = CARTESIAN_POINT ('', (10.551726368258, 4.9350460155867, 20.));
#9370 = CARTESIAN_POINT ('', (10.509241891233, 5.4206458100453, 16.03));
#9380 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9360, #9370), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9390 = EDGE_CURVE ('', #9350, #9250, #9380, .T.);
#9400 = ORIENTED_EDGE ('', *, *, #9390, .F.);
#9410 = CARTESIAN_POINT ('', (10.551726368258, 4.93504601558669, 20.));
#9420 = CARTESIAN_POINT ('', (10.1800997948711, 4.90253290335041, 20.));
#9430 = CARTESIAN_POINT ('', (9.91631634911069, 5.16631634911094, 20.));
#9440 = CARTESIAN_POINT ('', (9.65253290335022, 5.43009979487147, 20.));
#9450 = CARTESIAN_POINT ('', (9.68504601558661, 5.80172636825833, 20.));
#9460 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#9410, #9420, #9430, #9440, #9450), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (80.0000000000076, 130.000000000008, 180.000000000008), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.906307787036649, 1., 0.906307787036649, 1.))
   REPRESENTATION_ITEM ('')
);
#9470 = EDGE_CURVE ('', #9350, #9040, #9460, .T.);
#9480 = ORIENTED_EDGE ('', *, *, #9470, .T.);
#9490 = ORIENTED_EDGE ('', *, *, #9080, .T.);
#9500 = EDGE_LOOP ('', (#9330, #9400, #9480, #9490));
#9510 = FACE_OUTER_BOUND ('', #9500, .T.);
#9520 = CARTESIAN_POINT ('', (10.1707681273738, 5.75923118985298, 16.029));
#9530 = CARTESIAN_POINT ('', (9.68492369825802, 5.80173706963781, 20.001));
#9540 = CARTESIAN_POINT ('', (10.1435387115809, 5.44799754316677, 16.029));
#9550 = CARTESIAN_POINT ('', (9.61518840268029, 5.00465899383584, 20.001));
#9560 = CARTESIAN_POINT ('', (10.4547723582671, 5.4207681273739, 16.029));
#9570 = CARTESIAN_POINT ('', (10.4122664784823, 4.93492369825812, 20.001));
#9580 = CARTESIAN_POINT ('', (10.7660060049533, 5.39353871158103, 16.029));
#9590 = CARTESIAN_POINT ('', (11.2093445542843, 4.86518840268041, 20.001));
#9600 = CARTESIAN_POINT ('', (10.7932354207462, 5.70477235826724, 16.029));
#9610 = CARTESIAN_POINT ('', (11.279079849862, 5.66226647848239, 20.001));
#9620 = CARTESIAN_POINT ('', (10.8204648365391, 6.01600600495345, 16.029));
#9630 = CARTESIAN_POINT ('', (11.3488151454397, 6.45934455428436, 20.001));
#9640 = CARTESIAN_POINT ('', (10.5092311898529, 6.04323542074631, 16.029));
#9650 = CARTESIAN_POINT ('', (10.5517370696377, 6.52907984986208, 20.001));
#9660 = CARTESIAN_POINT ('', (10.1979975431667, 6.07046483653918, 16.029));
#9670 = CARTESIAN_POINT ('', (9.75465899383575, 6.59881514543979, 20.001));
#9680 = CARTESIAN_POINT ('', (10.1707681273738, 5.75923118985298, 16.029));
#9690 = CARTESIAN_POINT ('', (9.68492369825802, 5.80173706963781, 20.001));
#9700 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#9520, #9530), (#9540, #9550), (#9560, #9570), (#9580, #9590), (#9600, #9610), (#9620, #9630), (#9640, #9650), (#9660, #9670), (#9680, #9690)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#9710 = ADVANCED_FACE ('', (#9510), #9700, .T.);
#9720 = CARTESIAN_POINT ('', (18.525875552198, 6.1220103750201, 16.03));
#9730 = VERTEX_POINT ('', #9720);
#9740 = CARTESIAN_POINT ('', (10.509241891233, 5.4206458100453, 16.03));
#9750 = CARTESIAN_POINT ('', (18.525875552198, 6.1220103750201, 16.03));
#9760 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9740, #9750), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9770 = EDGE_CURVE ('', #9250, #9730, #9760, .T.);
#9780 = ORIENTED_EDGE ('', *, *, #9770, .T.);
#9790 = CARTESIAN_POINT ('', (18.568360029223, 5.6364105805615, 20.));
#9800 = VERTEX_POINT ('', #9790);
#9810 = CARTESIAN_POINT ('', (18.568360029223, 5.6364105805615, 20.));
#9820 = CARTESIAN_POINT ('', (18.525875552198, 6.1220103750201, 16.03));
#9830 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9810, #9820), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9840 = EDGE_CURVE ('', #9800, #9730, #9830, .T.);
#9850 = ORIENTED_EDGE ('', *, *, #9840, .F.);
#9860 = CARTESIAN_POINT ('', (18.568360029223, 5.6364105805615, 20.));
#9870 = CARTESIAN_POINT ('', (10.551726368258, 4.9350460155867, 20.));
#9880 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9860, #9870), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9890 = EDGE_CURVE ('', #9800, #9350, #9880, .T.);
#9900 = ORIENTED_EDGE ('', *, *, #9890, .T.);
#9910 = ORIENTED_EDGE ('', *, *, #9390, .T.);
#9920 = EDGE_LOOP ('', (#9780, #9850, #9900, #9910));
#9930 = FACE_OUTER_BOUND ('', #9920, .T.);
#9940 = CARTESIAN_POINT ('', (10.4650845328794, 5.42733687881679, 15.9443689196556));
#9950 = CARTESIAN_POINT ('', (10.5094017512983, 4.92078875437605, 20.0856310803444));
#9960 = CARTESIAN_POINT ('', (18.5682001691577, 6.13626763623079, 15.9443689196556));
#9970 = CARTESIAN_POINT ('', (18.6125173875766, 5.62971951179005, 20.0856310803444));
#9980 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#9940, #9950), (#9960, #9970)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.043406161204345, 8.09066206039942), (-4.08608816188324, 0.0862741548116226), .UNSPECIFIED.);
#9990 = ADVANCED_FACE ('', (#9930), #9980, .T.);
#10000 = CARTESIAN_POINT ('', (18.80999139904, 6.4061262218624, 16.03));
#10010 = VERTEX_POINT ('', #10000);
#10020 = CARTESIAN_POINT ('', (18.525875552198, 6.12201037502016, 16.03));
#10030 = CARTESIAN_POINT ('', (18.7871342267671, 6.14486754729321, 16.03));
#10040 = CARTESIAN_POINT ('', (18.8099913990398, 6.40612622186242, 16.03));
#10050 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#10020, #10030, #10040), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (180.000000000094, 260.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.766044443119505, 1.))
   REPRESENTATION_ITEM ('')
);
#10060 = EDGE_CURVE ('', #9730, #10010, #10050, .T.);
#10070 = ORIENTED_EDGE ('', *, *, #10060, .T.);
#10080 = CARTESIAN_POINT ('', (19.295591193499, 6.3636417448368, 20.));
#10090 = VERTEX_POINT ('', #10080);
#10100 = CARTESIAN_POINT ('', (19.295591193499, 6.3636417448368, 20.));
#10110 = CARTESIAN_POINT ('', (18.80999139904, 6.4061262218624, 16.03));
#10120 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10100, #10110), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10130 = EDGE_CURVE ('', #10090, #10010, #10120, .T.);
#10140 = ORIENTED_EDGE ('', *, *, #10130, .F.);
#10150 = CARTESIAN_POINT ('', (19.2955911934984, 6.36364174483686, 20.));
#10160 = CARTESIAN_POINT ('', (19.2370853122228, 5.69491646183704, 20.));
#10170 = CARTESIAN_POINT ('', (18.568360029223, 5.63641058056149, 20.));
#10180 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#10150, #10160, #10170), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (99.9999999999942, 180.000000000009), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.766044443118894, 1.))
   REPRESENTATION_ITEM ('')
);
#10190 = EDGE_CURVE ('', #10090, #9800, #10180, .T.);
#10200 = ORIENTED_EDGE ('', *, *, #10190, .T.);
#10210 = ORIENTED_EDGE ('', *, *, #9840, .T.);
#10220 = EDGE_LOOP ('', (#10070, #10140, #10200, #10210));
#10230 = FACE_OUTER_BOUND ('', #10220, .T.);
#10240 = CARTESIAN_POINT ('', (18.2978141174748, 6.19403681237472, 16.029));
#10250 = CARTESIAN_POINT ('', (17.9843264228816, 5.82043672610897, 20.001));
#10260 = CARTESIAN_POINT ('', (18.5171192236163, 6.01001797869618, 16.029));
#10270 = CARTESIAN_POINT ('', (18.545972934684, 5.34915934520384, 20.001));
#10280 = CARTESIAN_POINT ('', (18.71955150949, 6.21245026457003, 16.029));
#10290 = CARTESIAN_POINT ('', (19.0644076817701, 5.86759409229023, 20.001));
#10300 = CARTESIAN_POINT ('', (18.9219837953638, 6.41488255044389, 16.029));
#10310 = CARTESIAN_POINT ('', (19.5828424288561, 6.38602883937661, 20.001));
#10320 = CARTESIAN_POINT ('', (18.7379649616851, 6.63418765658533, 16.029));
#10330 = CARTESIAN_POINT ('', (19.1115650479506, 6.94767535117876, 20.001));
#10340 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#10240, #10250), (#10260, #10270), (#10280, #10290), (#10300, #10310), (#10320, #10330)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 3), (2, 2), (0., 0.5, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.737277336810126, 0.737277336810126), (1., 1.), (0.737277336810126, 0.737277336810126), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#10350 = ADVANCED_FACE ('', (#10230), #10340, .T.);
#10360 = CARTESIAN_POINT ('', (19.511355964015, 14.4227598828275, 16.03));
#10370 = VERTEX_POINT ('', #10360);
#10380 = CARTESIAN_POINT ('', (18.80999139904, 6.4061262218624, 16.03));
#10390 = CARTESIAN_POINT ('', (19.511355964015, 14.4227598828275, 16.03));
#10400 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10380, #10390), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10410 = EDGE_CURVE ('', #10010, #10370, #10400, .T.);
#10420 = ORIENTED_EDGE ('', *, *, #10410, .T.);
#10430 = CARTESIAN_POINT ('', (19.996955758473, 14.3802754058019, 20.));
#10440 = VERTEX_POINT ('', #10430);
#10450 = CARTESIAN_POINT ('', (19.996955758473, 14.3802754058019, 20.));
#10460 = CARTESIAN_POINT ('', (19.511355964015, 14.4227598828275, 16.03));
#10470 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10450, #10460), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10480 = EDGE_CURVE ('', #10440, #10370, #10470, .T.);
#10490 = ORIENTED_EDGE ('', *, *, #10480, .F.);
#10500 = CARTESIAN_POINT ('', (19.996955758473, 14.3802754058019, 20.));
#10510 = CARTESIAN_POINT ('', (19.295591193499, 6.3636417448368, 20.));
#10520 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10500, #10510), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10530 = EDGE_CURVE ('', #10440, #10090, #10520, .T.);
#10540 = ORIENTED_EDGE ('', *, *, #10530, .T.);
#10550 = ORIENTED_EDGE ('', *, *, #10130, .T.);
#10560 = EDGE_LOOP ('', (#10420, #10490, #10540, #10550));
#10570 = FACE_OUTER_BOUND ('', #10560, .T.);
#10580 = CARTESIAN_POINT ('', (18.7957341378297, 6.3638016049021, 15.9443689196556));
#10590 = CARTESIAN_POINT ('', (19.3022822622704, 6.31948438648322, 20.0856310803443));
#10600 = CARTESIAN_POINT ('', (19.5046648952437, 14.466917241181, 15.9443689196556));
#10610 = CARTESIAN_POINT ('', (20.0112130196845, 14.4226000227621, 20.0856310803443));
#10620 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#10580, #10590), (#10600, #10610)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.0434061612050236, 8.0906620603994), (-4.08608816188329, 0.0862741548115338), .UNSPECIFIED.);
#10630 = ADVANCED_FACE ('', (#10570), #10620, .T.);
#10640 = CARTESIAN_POINT ('', (19.5113559640148, 14.4227598828275, 16.03));
#10650 = CARTESIAN_POINT ('', (19.5240582392613, 14.5679475532597, 16.03));
#10660 = CARTESIAN_POINT ('', (19.4210028962608, 14.6710028962604, 16.03));
#10670 = CARTESIAN_POINT ('', (19.3179475532602, 14.7740582392611, 16.03));
#10680 = CARTESIAN_POINT ('', (19.172759882828, 14.7613559640148, 16.03));
#10690 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#10640, #10650, #10660, #10670, #10680), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 229.999999999955, 279.999999999911), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.906307787036814, 1., 0.906307787036814, 1.))
   REPRESENTATION_ITEM ('')
);
#10700 = EDGE_CURVE ('', #10370, #8250, #10690, .T.);
#10710 = ORIENTED_EDGE ('', *, *, #10700, .T.);
#10720 = ORIENTED_EDGE ('', *, *, #8500, .F.);
#10730 = CARTESIAN_POINT ('', (19.130275405802, 15.2469557584734, 20.));
#10740 = CARTESIAN_POINT ('', (19.5019019791888, 15.2794688707097, 20.));
#10750 = CARTESIAN_POINT ('', (19.7656854249493, 15.0156854249492, 20.));
#10760 = CARTESIAN_POINT ('', (20.0294688707097, 14.7519019791887, 20.));
#10770 = CARTESIAN_POINT ('', (19.9969557584734, 14.3802754058019, 20.));
#10780 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#10730, #10740, #10750, #10760, #10770), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (80.0000000000077, 130.000000000004, 180.000000000001), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.906307787036663, 1., 0.906307787036663, 1.))
   REPRESENTATION_ITEM ('')
);
#10790 = EDGE_CURVE ('', #8410, #10440, #10780, .T.);
#10800 = ORIENTED_EDGE ('', *, *, #10790, .T.);
#10810 = ORIENTED_EDGE ('', *, *, #10480, .T.);
#10820 = EDGE_LOOP ('', (#10710, #10720, #10800, #10810));
#10830 = FACE_OUTER_BOUND ('', #10820, .T.);
#10840 = CARTESIAN_POINT ('', (19.5112336466862, 14.4227705842071, 16.029));
#10850 = CARTESIAN_POINT ('', (19.997078075802, 14.3802647044223, 20.001));
#10860 = CARTESIAN_POINT ('', (19.5384630624791, 14.7340042308933, 16.029));
#10870 = CARTESIAN_POINT ('', (20.0668133713797, 15.1773427802242, 20.001));
#10880 = CARTESIAN_POINT ('', (19.2272294157929, 14.7612336466862, 16.029));
#10890 = CARTESIAN_POINT ('', (19.2697352955778, 15.247078075802, 20.001));
#10900 = CARTESIAN_POINT ('', (18.9159957691067, 14.7884630624791, 16.029));
#10910 = CARTESIAN_POINT ('', (18.4726572197758, 15.3168133713797, 20.001));
#10920 = CARTESIAN_POINT ('', (18.8887663533138, 14.4772294157929, 16.029));
#10930 = CARTESIAN_POINT ('', (18.402921924198, 14.5197352955778, 20.001));
#10940 = CARTESIAN_POINT ('', (18.8615369375209, 14.1659957691067, 16.029));
#10950 = CARTESIAN_POINT ('', (18.3331866286203, 13.7226572197758, 20.001));
#10960 = CARTESIAN_POINT ('', (19.1727705842071, 14.1387663533138, 16.029));
#10970 = CARTESIAN_POINT ('', (19.1302647044222, 13.652921924198, 20.001));
#10980 = CARTESIAN_POINT ('', (19.4840042308933, 14.1115369375209, 16.029));
#10990 = CARTESIAN_POINT ('', (19.9273427802242, 13.5831866286203, 20.001));
#11000 = CARTESIAN_POINT ('', (19.5112336466862, 14.4227705842071, 16.029));
#11010 = CARTESIAN_POINT ('', (19.997078075802, 14.3802647044223, 20.001));
#11020 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#10840, #10850), (#10860, #10870), (#10880, #10890), (#10900, #10910), (#10920, #10930), (#10940, #10950), (#10960, #10970), (#10980, #10990), (#11000, #11010)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#11030 = ADVANCED_FACE ('', (#10830), #11020, .T.);
#11040 = ORIENTED_EDGE ('', *, *, #10790, .F.);
#11050 = ORIENTED_EDGE ('', *, *, #8450, .F.);
#11060 = ORIENTED_EDGE ('', *, *, #8790, .F.);
#11070 = ORIENTED_EDGE ('', *, *, #9130, .F.);
#11080 = ORIENTED_EDGE ('', *, *, #9470, .F.);
#11090 = ORIENTED_EDGE ('', *, *, #9890, .F.);
#11100 = ORIENTED_EDGE ('', *, *, #10190, .F.);
#11110 = ORIENTED_EDGE ('', *, *, #10530, .F.);
#11120 = EDGE_LOOP ('', (#11040, #11050, #11060, #11070, #11080, #11090, #11100, #11110));
#11130 = FACE_OUTER_BOUND ('', #11120, .T.);
#11140 = ORIENTED_EDGE ('', *, *, #8000, .T.);
#11150 = ORIENTED_EDGE ('', *, *, #7920, .T.);
#11160 = EDGE_LOOP ('', (#11140, #11150));
#11170 = FACE_BOUND ('', #11160, .T.);
#11180 = CARTESIAN_POINT ('', (9.73037258269352, 4.00039124492354, 20.));
#11190 = CARTESIAN_POINT ('', (8.75039124492335, 15.2016291913664, 20.));
#11200 = CARTESIAN_POINT ('', (20.9316105291366, 4.98037258269371, 20.));
#11210 = CARTESIAN_POINT ('', (19.9516291913664, 16.1816105291366, 20.));
#11220 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#11180, #11190), (#11200, #11210)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-5.62201242784147, 5.62201242784138), (-5.62201242784137, 5.62201242784127), .UNSPECIFIED.);
#11230 = ADVANCED_FACE ('', (#11130, #11170), #11220, .T.);
#11240 = ORIENTED_EDGE ('', *, *, #8310, .F.);
#11250 = ORIENTED_EDGE ('', *, *, #10700, .F.);
#11260 = ORIENTED_EDGE ('', *, *, #10410, .F.);
#11270 = ORIENTED_EDGE ('', *, *, #10060, .F.);
#11280 = ORIENTED_EDGE ('', *, *, #9770, .F.);
#11290 = ORIENTED_EDGE ('', *, *, #9320, .F.);
#11300 = ORIENTED_EDGE ('', *, *, #9010, .F.);
#11310 = ORIENTED_EDGE ('', *, *, #8660, .F.);
#11320 = EDGE_LOOP ('', (#11240, #11250, #11260, #11270, #11280, #11290, #11300, #11310));
#11330 = FACE_OUTER_BOUND ('', #11320, .T.);
#11340 = ORIENTED_EDGE ('', *, *, #5360, .T.);
#11350 = ORIENTED_EDGE ('', *, *, #5280, .T.);
#11360 = EDGE_LOOP ('', (#11340, #11350));
#11370 = FACE_BOUND ('', #11360, .T.);
#11380 = CARTESIAN_POINT ('', (20.3384362625637, 5.47810489099863, 16.03));
#11390 = CARTESIAN_POINT ('', (19.4538968830612, 15.5884362625635, 16.03));
#11400 = CARTESIAN_POINT ('', (10.2281048909987, 4.59356551149618, 16.03));
#11410 = CARTESIAN_POINT ('', (9.34356551149629, 14.7038968830611, 16.03));
#11420 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#11380, #11390), (#11400, #11410)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-5.07447559745691, 5.07447559745684), (-5.07447559745709, 5.07447559745659), .UNSPECIFIED.);
#11430 = ADVANCED_FACE ('', (#11330, #11370), #11420, .T.);
#11440 = CLOSED_SHELL ('', (#5590, #5910, #6490, #7720, #8230, #8590, #8950, #9230, #9710, #9990, #10350, #10630, #11030, #11230, #11430));
#11450 = MANIFOLD_SOLID_BREP ('CUT', #11440);
#11460 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#11470 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#11480 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#11490 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #11460, 'DISTANCE_ACCURACY_VALUE', '');
#11500 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#11490))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#11460, #11470, #11480))
   REPRESENTATION_CONTEXT ('', '3D')
);
#11510 = COLOUR_RGB ('', 1., 0.74901960784314, 0.);
#11520 = FILL_AREA_STYLE_COLOUR ('', #11510);
#11530 = FILL_AREA_STYLE ('', (#11520));
#11540 = SURFACE_STYLE_FILL_AREA (#11530);
#11550 = SURFACE_SIDE_STYLE ('', (#11540));
#11560 = SURFACE_STYLE_USAGE (.POSITIVE., #11550);
#11570 = PRESENTATION_STYLE_ASSIGNMENT ((#11560));
#11580 = STYLED_ITEM ('', (#11570), #11450);
#11590 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#11450), #11500);
#11600 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#11610 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #11600);
#11620 = MECHANICAL_CONTEXT ('', #11600, 'mechanical');
#11630 = PRODUCT ('NONE', '', '', (#11620));
#11640 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#11650 = PERSON ('', '', $, $, $, $);
#11660 = ORGANIZATION ($, '', '');
#11670 = PERSON_AND_ORGANIZATION (#11650, #11660);
#11680 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#11670, #11640, (#11630));
#11690 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#11630));
#11700 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #11630, .NOT_KNOWN.);
#11710 = APPROVAL_STATUS ('approved');
#11720 = APPROVAL (#11710, '');
#11730 = CALENDAR_DATE (2018, 28, 6);
#11740 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#11750 = LOCAL_TIME (17, 2, 42., #11740);
#11760 = DATE_AND_TIME (#11730, #11750);
#11770 = APPROVAL_DATE_TIME (#11760, #11720);
#11780 = APPROVAL_ROLE ('');
#11790 = PERSON ('', '', $, $, $, $);
#11800 = ORGANIZATION ($, '', '');
#11810 = PERSON_AND_ORGANIZATION (#11790, #11800);
#11820 = APPROVAL_PERSON_ORGANIZATION (#11810, #11720, #11780);
#11830 = CC_DESIGN_APPROVAL (#11720, (#11700));
#11840 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#11850 = PERSON ('', '', $, $, $, $);
#11860 = ORGANIZATION ($, '', '');
#11870 = PERSON_AND_ORGANIZATION (#11850, #11860);
#11880 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#11870, #11840, (#11700));
#11890 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#11900 = PERSON ('', '', $, $, $, $);
#11910 = ORGANIZATION ($, '', '');
#11920 = PERSON_AND_ORGANIZATION (#11900, #11910);
#11930 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#11920, #11890, (#11700));
#11940 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#11950 = SECURITY_CLASSIFICATION ('', '', #11940);
#11960 = APPROVAL_STATUS ('approved');
#11970 = APPROVAL (#11960, '');
#11980 = CALENDAR_DATE (2018, 28, 6);
#11990 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#12000 = LOCAL_TIME (17, 2, 42., #11990);
#12010 = DATE_AND_TIME (#11980, #12000);
#12020 = APPROVAL_DATE_TIME (#12010, #11970);
#12030 = APPROVAL_ROLE ('');
#12040 = PERSON ('', '', $, $, $, $);
#12050 = ORGANIZATION ($, '', '');
#12060 = PERSON_AND_ORGANIZATION (#12040, #12050);
#12070 = APPROVAL_PERSON_ORGANIZATION (#12060, #11970, #12030);
#12080 = CC_DESIGN_APPROVAL (#11970, (#11950));
#12090 = DATE_TIME_ROLE ('classification_date');
#12100 = CALENDAR_DATE (2018, 28, 6);
#12110 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#12120 = LOCAL_TIME (17, 2, 42., #12110);
#12130 = DATE_AND_TIME (#12100, #12120);
#12140 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#12130, #12090, (#11950));
#12150 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#12160 = PERSON ('', '', $, $, $, $);
#12170 = ORGANIZATION ($, '', '');
#12180 = PERSON_AND_ORGANIZATION (#12160, #12170);
#12190 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#12180, #12150, (#11950));
#12200 = CC_DESIGN_SECURITY_CLASSIFICATION (#11950, (#11700));
#12210 = DESIGN_CONTEXT ('', #11600, 'design');
#12220 = PRODUCT_DEFINITION ('', '', #11700, #12210);
#12230 = APPROVAL_STATUS ('approved');
#12240 = APPROVAL (#12230, '');
#12250 = CALENDAR_DATE (2018, 28, 6);
#12260 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#12270 = LOCAL_TIME (17, 2, 42., #12260);
#12280 = DATE_AND_TIME (#12250, #12270);
#12290 = APPROVAL_DATE_TIME (#12280, #12240);
#12300 = APPROVAL_ROLE ('');
#12310 = PERSON ('', '', $, $, $, $);
#12320 = ORGANIZATION ($, '', '');
#12330 = PERSON_AND_ORGANIZATION (#12310, #12320);
#12340 = APPROVAL_PERSON_ORGANIZATION (#12330, #12240, #12300);
#12350 = CC_DESIGN_APPROVAL (#12240, (#12220));
#12360 = DATE_TIME_ROLE ('creation_date');
#12370 = CALENDAR_DATE (2018, 28, 6);
#12380 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#12390 = LOCAL_TIME (17, 2, 42., #12380);
#12400 = DATE_AND_TIME (#12370, #12390);
#12410 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#12400, #12360, (#12220));
#12420 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#12430 = PERSON ('', '', $, $, $, $);
#12440 = ORGANIZATION ($, '', '');
#12450 = PERSON_AND_ORGANIZATION (#12430, #12440);
#12460 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#12450, #12420, (#12220));
#12470 = PRODUCT_DEFINITION_SHAPE ('', '', #12220);
#12480 = SHAPE_DEFINITION_REPRESENTATION (#12470, #11590);
ENDSEC;
END-ISO-10303-21;