ISO-10303-21;
HEADER;
FILE_DESCRIPTION ((), '1');
FILE_NAME ('SCLCR 2525 M12.stp', '2018-06-29T08:54:05', ('TDM Systems GmbH'), ('TDM Systems GmbH'), 'HarmonyWare STEP v2.0.2.9', 'TDM', '');
FILE_SCHEMA (('CONFIG_CONTROL_DESIGN'));
ENDSEC;

DATA;
#10 = CARTESIAN_POINT ('', (-130.25, -12.5, 25.));
#20 = VERTEX_POINT ('', #10);
#30 = CARTESIAN_POINT ('', (-130.25, 12.5, 25.));
#40 = VERTEX_POINT ('', #30);
#50 = CARTESIAN_POINT ('', (-130.25, -12.5, 25.));
#60 = CARTESIAN_POINT ('', (-130.25, 12.5, 25.));
#70 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#50, #60), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#80 = EDGE_CURVE ('', #20, #40, #70, .T.);
#90 = ORIENTED_EDGE ('', *, *, #80, .F.);
#100 = CARTESIAN_POINT ('', (4.031953552082, -12.5, 25.));
#110 = VERTEX_POINT ('', #100);
#120 = CARTESIAN_POINT ('', (4.031953552082, -12.5, 25.));
#130 = CARTESIAN_POINT ('', (-130.25, -12.5, 25.));
#140 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#120, #130), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#150 = EDGE_CURVE ('', #110, #20, #140, .T.);
#160 = ORIENTED_EDGE ('', *, *, #150, .F.);
#170 = CARTESIAN_POINT ('', (18.231953552082, 1.7, 25.));
#180 = VERTEX_POINT ('', #170);
#190 = CARTESIAN_POINT ('', (4.031953552082, -12.5, 25.));
#200 = CARTESIAN_POINT ('', (18.231953552082, 1.7, 25.));
#210 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#190, #200), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#220 = EDGE_CURVE ('', #110, #180, #210, .T.);
#230 = ORIENTED_EDGE ('', *, *, #220, .T.);
#240 = CARTESIAN_POINT ('', (18.684440515611, 6.8719496594509, 25.));
#250 = VERTEX_POINT ('', #240);
#260 = CARTESIAN_POINT ('', (18.231953552082, 1.7, 25.));
#270 = CARTESIAN_POINT ('', (18.684440515611, 6.8719496594509, 25.));
#280 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#260, #270), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#290 = EDGE_CURVE ('', #180, #250, #280, .T.);
#300 = ORIENTED_EDGE ('', *, *, #290, .T.);
#310 = CARTESIAN_POINT ('', (8.05902676354401, 5.9423464108726, 25.));
#320 = VERTEX_POINT ('', #310);
#330 = CARTESIAN_POINT ('', (18.684440515611, 6.8719496594509, 25.));
#340 = CARTESIAN_POINT ('', (8.05902676354401, 5.9423464108726, 25.));
#350 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#330, #340), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#360 = EDGE_CURVE ('', #250, #320, #350, .T.);
#370 = ORIENTED_EDGE ('', *, *, #360, .T.);
#380 = CARTESIAN_POINT ('', (7.192346410873, 6.8090267635441, 25.));
#390 = VERTEX_POINT ('', #380);
#400 = CARTESIAN_POINT ('', (8.05902676354398, 5.9423464108726, 25.));
#410 = CARTESIAN_POINT ('', (7.68740019015715, 5.90983329863631, 25.));
#420 = CARTESIAN_POINT ('', (7.4236167443967, 6.1736167443968, 25.));
#430 = CARTESIAN_POINT ('', (7.15983329863627, 6.43740019015727, 25.));
#440 = CARTESIAN_POINT ('', (7.1923464108726, 6.80902676354413, 25.));
#450 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#400, #410, #420, #430, #440), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (80.0000000000076, 130.000000000004, 180.000000000001), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.906307787036663, 1., 0.906307787036663, 1.))
   REPRESENTATION_ITEM ('')
);
#460 = EDGE_CURVE ('', #320, #390, #450, .T.);
#470 = ORIENTED_EDGE ('', *, *, #460, .T.);
#480 = CARTESIAN_POINT ('', (8.149008187421, 17.7437209055465, 25.));
#490 = VERTEX_POINT ('', #480);
#500 = CARTESIAN_POINT ('', (7.192346410873, 6.8090267635441, 25.));
#510 = CARTESIAN_POINT ('', (8.149008187421, 17.7437209055465, 25.));
#520 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#500, #510), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#530 = EDGE_CURVE ('', #390, #490, #520, .T.);
#540 = ORIENTED_EDGE ('', *, *, #530, .T.);
#550 = CARTESIAN_POINT ('', (2.11356479932499, 17.2156880297356, 25.));
#560 = VERTEX_POINT ('', #550);
#570 = CARTESIAN_POINT ('', (8.149008187421, 17.7437209055465, 25.));
#580 = CARTESIAN_POINT ('', (2.11356479932499, 17.2156880297356, 25.));
#590 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#570, #580), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#600 = EDGE_CURVE ('', #490, #560, #590, .T.);
#610 = ORIENTED_EDGE ('', *, *, #600, .T.);
#620 = CARTESIAN_POINT ('', (0.849999999999994, 12.5, 25.));
#630 = VERTEX_POINT ('', #620);
#640 = CARTESIAN_POINT ('', (2.11356479932499, 17.2156880297356, 25.));
#650 = CARTESIAN_POINT ('', (0.849999999999994, 12.5, 25.));
#660 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#640, #650), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#670 = EDGE_CURVE ('', #560, #630, #660, .T.);
#680 = ORIENTED_EDGE ('', *, *, #670, .T.);
#690 = CARTESIAN_POINT ('', (0.849999999999994, 12.5, 25.));
#700 = CARTESIAN_POINT ('', (-130.25, 12.5, 25.));
#710 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#690, #700), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#720 = EDGE_CURVE ('', #630, #40, #710, .T.);
#730 = ORIENTED_EDGE ('', *, *, #720, .T.);
#740 = EDGE_LOOP ('', (#90, #160, #230, #300, #370, #470, #540, #610, #680, #730));
#750 = FACE_OUTER_BOUND ('', #740, .T.);
#760 = CARTESIAN_POINT ('', (18.685440515611, 17.7447209055465, 25.));
#770 = CARTESIAN_POINT ('', (18.685440515611, -12.501, 25.));
#780 = CARTESIAN_POINT ('', (-130.251, 17.7447209055465, 25.));
#790 = CARTESIAN_POINT ('', (-130.251, -12.501, 25.));
#800 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#760, #770), (#780, #790)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-72.935440515611, 76.001), (-13.7447209055465, 16.501), .UNSPECIFIED.);
#810 = ADVANCED_FACE ('', (#750), #800, .T.);
#820 = CARTESIAN_POINT ('', (-130.25, -12.5, 0.));
#830 = VERTEX_POINT ('', #820);
#840 = CARTESIAN_POINT ('', (-130.25, -12.5, 0.));
#850 = CARTESIAN_POINT ('', (-130.25, -12.5, 25.));
#860 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#840, #850), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#870 = EDGE_CURVE ('', #830, #20, #860, .T.);
#880 = ORIENTED_EDGE ('', *, *, #870, .F.);
#890 = CARTESIAN_POINT ('', (4.031953552082, -12.5, 0.));
#900 = VERTEX_POINT ('', #890);
#910 = CARTESIAN_POINT ('', (-130.25, -12.5, 0.));
#920 = CARTESIAN_POINT ('', (4.031953552082, -12.5, 0.));
#930 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#910, #920), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#940 = EDGE_CURVE ('', #830, #900, #930, .T.);
#950 = ORIENTED_EDGE ('', *, *, #940, .T.);
#960 = CARTESIAN_POINT ('', (4.031953552082, -12.5, 0.));
#970 = CARTESIAN_POINT ('', (4.031953552082, -12.5, 25.));
#980 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#960, #970), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#990 = EDGE_CURVE ('', #900, #110, #980, .T.);
#1000 = ORIENTED_EDGE ('', *, *, #990, .T.);
#1010 = ORIENTED_EDGE ('', *, *, #150, .T.);
#1020 = EDGE_LOOP ('', (#880, #950, #1000, #1010));
#1030 = FACE_OUTER_BOUND ('', #1020, .T.);
#1040 = CARTESIAN_POINT ('', (4.03295355208198, -12.5, -0.001));
#1050 = CARTESIAN_POINT ('', (-130.251, -12.5, -0.001));
#1060 = CARTESIAN_POINT ('', (4.03295355208198, -12.5, 25.001));
#1070 = CARTESIAN_POINT ('', (-130.251, -12.5, 25.001));
#1080 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1040, #1050), (#1060, #1070)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.001, 25.001), (17.717046447918, 152.001), .UNSPECIFIED.);
#1090 = ADVANCED_FACE ('', (#1030), #1080, .T.);
#1100 = ORIENTED_EDGE ('', *, *, #940, .F.);
#1110 = CARTESIAN_POINT ('', (-130.25, 12.5, 0.));
#1120 = VERTEX_POINT ('', #1110);
#1130 = CARTESIAN_POINT ('', (-130.25, -12.5, 0.));
#1140 = CARTESIAN_POINT ('', (-130.25, 12.5, 0.));
#1150 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1130, #1140), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1160 = EDGE_CURVE ('', #830, #1120, #1150, .T.);
#1170 = ORIENTED_EDGE ('', *, *, #1160, .T.);
#1180 = CARTESIAN_POINT ('', (0.849999999999994, 12.5, 0.));
#1190 = VERTEX_POINT ('', #1180);
#1200 = CARTESIAN_POINT ('', (-130.25, 12.5, 0.));
#1210 = CARTESIAN_POINT ('', (0.849999999999994, 12.5, 0.));
#1220 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1200, #1210), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1230 = EDGE_CURVE ('', #1120, #1190, #1220, .T.);
#1240 = ORIENTED_EDGE ('', *, *, #1230, .T.);
#1250 = CARTESIAN_POINT ('', (2.11356479932499, 17.2156880297356, 0.));
#1260 = VERTEX_POINT ('', #1250);
#1270 = CARTESIAN_POINT ('', (0.849999999999994, 12.5, 0.));
#1280 = CARTESIAN_POINT ('', (2.11356479932499, 17.2156880297356, 0.));
#1290 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1270, #1280), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1300 = EDGE_CURVE ('', #1190, #1260, #1290, .T.);
#1310 = ORIENTED_EDGE ('', *, *, #1300, .T.);
#1320 = CARTESIAN_POINT ('', (19.1305875226, 18.7044846049852, 0.));
#1330 = VERTEX_POINT ('', #1320);
#1340 = CARTESIAN_POINT ('', (2.11356479932499, 17.2156880297356, 0.));
#1350 = CARTESIAN_POINT ('', (19.1305875226, 18.7044846049852, 0.));
#1360 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1340, #1350), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1370 = EDGE_CURVE ('', #1260, #1330, #1360, .T.);
#1380 = ORIENTED_EDGE ('', *, *, #1370, .T.);
#1390 = CARTESIAN_POINT ('', (19.672262743019, 18.1628093845655, -2.220446E-15));
#1400 = VERTEX_POINT ('', #1390);
#1410 = CARTESIAN_POINT ('', (19.6722627430199, 18.1628093845654, 0.));
#1420 = CARTESIAN_POINT ('', (19.6925834381676, 18.3950759929323, 0.));
#1430 = CARTESIAN_POINT ('', (19.5277187845672, 18.5599406465326, 0.));
#1440 = CARTESIAN_POINT ('', (19.3628541309668, 18.724805300133, 0.));
#1450 = CARTESIAN_POINT ('', (19.1305875226, 18.7044846049852, 0.));
#1460 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1410, #1420, #1430, #1440, #1450), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (309.999999999996, 360.000000000008, 410.00000000002), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.906307787036606, 1., 0.906307787036606, 1.))
   REPRESENTATION_ITEM ('')
);
#1470 = EDGE_CURVE ('', #1400, #1330, #1460, .T.);
#1480 = ORIENTED_EDGE ('', *, *, #1470, .F.);
#1490 = CARTESIAN_POINT ('', (18.231953552082, 1.7, 0.));
#1500 = VERTEX_POINT ('', #1490);
#1510 = CARTESIAN_POINT ('', (19.672262743019, 18.1628093845655, -2.220446E-15));
#1520 = CARTESIAN_POINT ('', (18.231953552082, 1.7, 0.));
#1530 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1510, #1520), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1540 = EDGE_CURVE ('', #1400, #1500, #1530, .T.);
#1550 = ORIENTED_EDGE ('', *, *, #1540, .T.);
#1560 = CARTESIAN_POINT ('', (18.231953552082, 1.7, 0.));
#1570 = CARTESIAN_POINT ('', (4.031953552082, -12.5, 0.));
#1580 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1560, #1570), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1590 = EDGE_CURVE ('', #1500, #900, #1580, .T.);
#1600 = ORIENTED_EDGE ('', *, *, #1590, .T.);
#1610 = EDGE_LOOP ('', (#1100, #1170, #1240, #1310, #1380, #1480, #1550, #1600));
#1620 = FACE_OUTER_BOUND ('', #1610, .T.);
#1630 = CARTESIAN_POINT ('', (-130.251, 18.725805300133, 0.));
#1640 = CARTESIAN_POINT ('', (-130.251, -12.501, 0.));
#1650 = CARTESIAN_POINT ('', (19.6935834381676, 18.725805300133, 0.));
#1660 = CARTESIAN_POINT ('', (19.6935834381676, -12.501, 0.));
#1670 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1630, #1640), (#1650, #1660)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-73.9435834381676, 76.001), (-14.725805300133, 16.501), .UNSPECIFIED.);
#1680 = ADVANCED_FACE ('', (#1620), #1670, .T.);
#1690 = ORIENTED_EDGE ('', *, *, #870, .T.);
#1700 = ORIENTED_EDGE ('', *, *, #80, .T.);
#1710 = CARTESIAN_POINT ('', (-130.25, 12.5, 0.));
#1720 = CARTESIAN_POINT ('', (-130.25, 12.5, 25.));
#1730 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1710, #1720), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1740 = EDGE_CURVE ('', #1120, #40, #1730, .T.);
#1750 = ORIENTED_EDGE ('', *, *, #1740, .F.);
#1760 = ORIENTED_EDGE ('', *, *, #1160, .F.);
#1770 = EDGE_LOOP ('', (#1690, #1700, #1750, #1760));
#1780 = FACE_OUTER_BOUND ('', #1770, .T.);
#1790 = CARTESIAN_POINT ('', (-130.25, 12.501, 25.001));
#1800 = CARTESIAN_POINT ('', (-130.25, -12.501, 25.001));
#1810 = CARTESIAN_POINT ('', (-130.25, 12.501, -0.001));
#1820 = CARTESIAN_POINT ('', (-130.25, -12.501, -0.001));
#1830 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1790, #1800), (#1810, #1820)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-25.001, 0.001), (-25.001, 0.001), .UNSPECIFIED.);
#1840 = ADVANCED_FACE ('', (#1780), #1830, .T.);
#1850 = ORIENTED_EDGE ('', *, *, #1230, .F.);
#1860 = ORIENTED_EDGE ('', *, *, #1740, .T.);
#1870 = ORIENTED_EDGE ('', *, *, #720, .F.);
#1880 = CARTESIAN_POINT ('', (0.849999999999994, 12.5, 0.));
#1890 = CARTESIAN_POINT ('', (0.849999999999994, 12.5, 25.));
#1900 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1880, #1890), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1910 = EDGE_CURVE ('', #1190, #630, #1900, .T.);
#1920 = ORIENTED_EDGE ('', *, *, #1910, .F.);
#1930 = EDGE_LOOP ('', (#1850, #1860, #1870, #1920));
#1940 = FACE_OUTER_BOUND ('', #1930, .T.);
#1950 = CARTESIAN_POINT ('', (0.850999999999971, 12.5, 25.001));
#1960 = CARTESIAN_POINT ('', (-130.251, 12.5, 25.001));
#1970 = CARTESIAN_POINT ('', (0.850999999999971, 12.5, -0.00100000000000122));
#1980 = CARTESIAN_POINT ('', (-130.251, 12.5, -0.00100000000000122));
#1990 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1950, #1960), (#1970, #1980)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-25.001, 0.00100000000000122), (-0.00100000000000477, 131.101), .UNSPECIFIED.);
#2000 = ADVANCED_FACE ('', (#1940), #1990, .T.);
#2010 = CARTESIAN_POINT ('', (19.1305875226, 18.7044846049852, 20.24));
#2020 = VERTEX_POINT ('', #2010);
#2030 = CARTESIAN_POINT ('', (19.1305875226, 18.7044846049852, 0.));
#2040 = CARTESIAN_POINT ('', (19.1305875226, 18.7044846049852, 20.24));
#2050 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2030, #2040), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2060 = EDGE_CURVE ('', #1330, #2020, #2050, .T.);
#2070 = ORIENTED_EDGE ('', *, *, #2060, .T.);
#2080 = CARTESIAN_POINT ('', (19.672262743019, 18.1628093845655, 20.24));
#2090 = VERTEX_POINT ('', #2080);
#2100 = CARTESIAN_POINT ('', (19.1305875226, 18.7044846049852, 20.24));
#2110 = CARTESIAN_POINT ('', (19.3628541309668, 18.724805300133, 20.24));
#2120 = CARTESIAN_POINT ('', (19.5277187845672, 18.5599406465326, 20.24));
#2130 = CARTESIAN_POINT ('', (19.6925834381676, 18.3950759929323, 20.24));
#2140 = CARTESIAN_POINT ('', (19.6722627430199, 18.1628093845654, 20.24));
#2150 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2100, #2110, #2120, #2130, #2140), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (264.999999999981, 314.999999999993, 365.000000000006), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.906307787036604, 1., 0.906307787036604, 1.))
   REPRESENTATION_ITEM ('')
);
#2160 = EDGE_CURVE ('', #2020, #2090, #2150, .T.);
#2170 = ORIENTED_EDGE ('', *, *, #2160, .T.);
#2180 = CARTESIAN_POINT ('', (19.672262743019, 18.1628093845655, 20.24));
#2190 = CARTESIAN_POINT ('', (19.672262743019, 18.1628093845655, -3.5527136788005E-15));
#2200 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2180, #2190), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2210 = EDGE_CURVE ('', #2090, #1400, #2200, .T.);
#2220 = ORIENTED_EDGE ('', *, *, #2210, .T.);
#2230 = ORIENTED_EDGE ('', *, *, #1470, .T.);
#2240 = EDGE_LOOP ('', (#2070, #2170, #2220, #2230));
#2250 = FACE_OUTER_BOUND ('', #2240, .T.);
#2260 = CARTESIAN_POINT ('', (18.8206120033807, 17.852833865346, -2.02520000000001));
#2270 = CARTESIAN_POINT ('', (18.8206120033807, 17.852833865346, 22.2652));
#2280 = CARTESIAN_POINT ('', (19.174165393974, 17.4992804747528, -2.02520000000001));
#2290 = CARTESIAN_POINT ('', (19.174165393974, 17.4992804747528, 22.2652));
#2300 = CARTESIAN_POINT ('', (19.5277187845673, 17.8528338653461, -2.02520000000001));
#2310 = CARTESIAN_POINT ('', (19.5277187845673, 17.8528338653461, 22.2652));
#2320 = CARTESIAN_POINT ('', (19.8812721751605, 18.2063872559394, -2.02520000000001));
#2330 = CARTESIAN_POINT ('', (19.8812721751605, 18.2063872559394, 22.2652));
#2340 = CARTESIAN_POINT ('', (19.5277187845672, 18.5599406465326, -2.02520000000001));
#2350 = CARTESIAN_POINT ('', (19.5277187845672, 18.5599406465326, 22.2652));
#2360 = CARTESIAN_POINT ('', (19.1741653939739, 18.9134940371259, -2.02520000000001));
#2370 = CARTESIAN_POINT ('', (19.1741653939739, 18.9134940371259, 22.2652));
#2380 = CARTESIAN_POINT ('', (18.8206120033807, 18.5599406465326, -2.02520000000001));
#2390 = CARTESIAN_POINT ('', (18.8206120033807, 18.5599406465326, 22.2652));
#2400 = CARTESIAN_POINT ('', (18.4670586127874, 18.2063872559393, -2.02520000000001));
#2410 = CARTESIAN_POINT ('', (18.4670586127874, 18.2063872559393, 22.2652));
#2420 = CARTESIAN_POINT ('', (18.8206120033807, 17.852833865346, -2.02520000000001));
#2430 = CARTESIAN_POINT ('', (18.8206120033807, 17.852833865346, 22.2652));
#2440 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#2260, #2270), (#2280, #2290), (#2300, #2310), (#2320, #2330), (#2340, #2350), (#2360, #2370), (#2380, #2390), (#2400, #2410), (#2420, #2430)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.250000000000003, 0.5, 0.750000000000006, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#2450 = ADVANCED_FACE ('', (#2250), #2440, .T.);
#2460 = ORIENTED_EDGE ('', *, *, #600, .F.);
#2470 = CARTESIAN_POINT ('', (8.74022051516201, 17.7954452819607, 20.24));
#2480 = VERTEX_POINT ('', #2470);
#2490 = CARTESIAN_POINT ('', (8.149008187421, 17.7437209055465, 25.));
#2500 = CARTESIAN_POINT ('', (8.74022051516201, 17.7954452819607, 20.24));
#2510 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2490, #2500), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2520 = EDGE_CURVE ('', #490, #2480, #2510, .T.);
#2530 = ORIENTED_EDGE ('', *, *, #2520, .T.);
#2540 = CARTESIAN_POINT ('', (19.1305875226, 18.7044846049852, 20.24));
#2550 = CARTESIAN_POINT ('', (8.74022051516201, 17.7954452819607, 20.24));
#2560 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2540, #2550), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2570 = EDGE_CURVE ('', #2020, #2480, #2560, .T.);
#2580 = ORIENTED_EDGE ('', *, *, #2570, .F.);
#2590 = ORIENTED_EDGE ('', *, *, #2060, .F.);
#2600 = ORIENTED_EDGE ('', *, *, #1370, .F.);
#2610 = CARTESIAN_POINT ('', (2.11356479932499, 17.2156880297356, 0.));
#2620 = CARTESIAN_POINT ('', (2.11356479932499, 17.2156880297356, 25.));
#2630 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2610, #2620), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2640 = EDGE_CURVE ('', #1260, #560, #2630, .T.);
#2650 = ORIENTED_EDGE ('', *, *, #2640, .T.);
#2660 = EDGE_LOOP ('', (#2460, #2530, #2580, #2590, #2600, #2650));
#2670 = FACE_OUTER_BOUND ('', #2660, .T.);
#2680 = CARTESIAN_POINT ('', (19.1316667505653, 18.7045790251976, 25.001));
#2690 = CARTESIAN_POINT ('', (2.11248557135957, 17.2155936095233, 25.001));
#2700 = CARTESIAN_POINT ('', (19.1316667505653, 18.7045790251976, -0.00100000000000122));
#2710 = CARTESIAN_POINT ('', (2.11248557135957, 17.2155936095233, -0.00100000000000122));
#2720 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2680, #2690), (#2700, #2710)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-25.001, 0.00100000000000122), (0.594793445856197, 17.6789851322873), .UNSPECIFIED.);
#2730 = ADVANCED_FACE ('', (#2670), #2720, .T.);
#2740 = ORIENTED_EDGE ('', *, *, #220, .F.);
#2750 = ORIENTED_EDGE ('', *, *, #990, .F.);
#2760 = ORIENTED_EDGE ('', *, *, #1590, .F.);
#2770 = CARTESIAN_POINT ('', (18.231953552082, 1.7, 0.));
#2780 = CARTESIAN_POINT ('', (18.231953552082, 1.7, 25.));
#2790 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2770, #2780), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2800 = EDGE_CURVE ('', #1500, #180, #2790, .T.);
#2810 = ORIENTED_EDGE ('', *, *, #2800, .T.);
#2820 = EDGE_LOOP ('', (#2740, #2750, #2760, #2810));
#2830 = FACE_OUTER_BOUND ('', #2820, .T.);
#2840 = CARTESIAN_POINT ('', (18.232953552082, 1.701, -0.00100000000000122));
#2850 = CARTESIAN_POINT ('', (4.03095355208197, -12.501, -0.00100000000000122));
#2860 = CARTESIAN_POINT ('', (18.232953552082, 1.701, 25.001));
#2870 = CARTESIAN_POINT ('', (4.03095355208197, -12.501, 25.001));
#2880 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2840, #2850), (#2860, #2870)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00100000000000122, 25.001), (-20.0832467992603, 0.00141421356238425), .UNSPECIFIED.);
#2890 = ADVANCED_FACE ('', (#2830), #2880, .T.);
#2900 = CARTESIAN_POINT ('', (18.736164892025, 7.4631619871922, 20.24));
#2910 = VERTEX_POINT ('', #2900);
#2920 = CARTESIAN_POINT ('', (18.736164892025, 7.4631619871922, 20.24));
#2930 = CARTESIAN_POINT ('', (19.672262743019, 18.1628093845655, 20.24));
#2940 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2920, #2930), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2950 = EDGE_CURVE ('', #2910, #2090, #2940, .T.);
#2960 = ORIENTED_EDGE ('', *, *, #2950, .F.);
#2970 = CARTESIAN_POINT ('', (18.736164892025, 7.4631619871922, 20.24));
#2980 = CARTESIAN_POINT ('', (18.684440515611, 6.8719496594509, 25.));
#2990 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2970, #2980), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3000 = EDGE_CURVE ('', #2910, #250, #2990, .T.);
#3010 = ORIENTED_EDGE ('', *, *, #3000, .T.);
#3020 = ORIENTED_EDGE ('', *, *, #290, .F.);
#3030 = ORIENTED_EDGE ('', *, *, #2800, .F.);
#3040 = ORIENTED_EDGE ('', *, *, #1540, .F.);
#3050 = ORIENTED_EDGE ('', *, *, #2210, .F.);
#3060 = EDGE_LOOP ('', (#2960, #3010, #3020, #3030, #3040, #3050));
#3070 = FACE_OUTER_BOUND ('', #3060, .T.);
#3080 = CARTESIAN_POINT ('', (19.672357163232, 18.1638886125308, -0.00100000000000477));
#3090 = CARTESIAN_POINT ('', (18.2318591318697, 1.69892077203466, -0.00100000000000477));
#3100 = CARTESIAN_POINT ('', (19.672357163232, 18.1638886125308, 25.001));
#3110 = CARTESIAN_POINT ('', (18.2318591318697, 1.69892077203466, 25.001));
#3120 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3080, #3090), (#3100, #3110)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00100000000000122, 25.001), (-16.5267779923624, 0.00108335044084029), .UNSPECIFIED.);
#3130 = ADVANCED_FACE ('', (#3070), #3120, .T.);
#3140 = ORIENTED_EDGE ('', *, *, #1300, .F.);
#3150 = ORIENTED_EDGE ('', *, *, #1910, .T.);
#3160 = ORIENTED_EDGE ('', *, *, #670, .F.);
#3170 = ORIENTED_EDGE ('', *, *, #2640, .F.);
#3180 = EDGE_LOOP ('', (#3140, #3150, #3160, #3170));
#3190 = FACE_OUTER_BOUND ('', #3180, .T.);
#3200 = CARTESIAN_POINT ('', (2.11388178662307, 17.2168710424375, 25.001));
#3210 = CARTESIAN_POINT ('', (0.849683012702087, 12.498816987298, 25.001));
#3220 = CARTESIAN_POINT ('', (2.11388178662307, 17.2168710424375, -0.00100000000000122));
#3230 = CARTESIAN_POINT ('', (0.849683012702087, 12.498816987298, -0.00100000000000122));
#3240 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3200, #3210), (#3220, #3230)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-25.001, 0.00100000000000122), (-0.00122474487139357, 4.88326423630168), .UNSPECIFIED.);
#3250 = ADVANCED_FACE ('', (#3190), #3240, .T.);
#3260 = ORIENTED_EDGE ('', *, *, #2570, .T.);
#3270 = CARTESIAN_POINT ('', (7.77457689490899, 6.7580881966318, 20.24));
#3280 = VERTEX_POINT ('', #3270);
#3290 = CARTESIAN_POINT ('', (7.77457689490899, 6.7580881966318, 20.24));
#3300 = CARTESIAN_POINT ('', (8.74022051516201, 17.7954452819607, 20.24));
#3310 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3290, #3300), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3320 = EDGE_CURVE ('', #3280, #2480, #3310, .T.);
#3330 = ORIENTED_EDGE ('', *, *, #3320, .F.);
#3340 = CARTESIAN_POINT ('', (8.008088196632, 6.5245768949086, 20.24));
#3350 = VERTEX_POINT ('', #3340);
#3360 = CARTESIAN_POINT ('', (8.008088196632, 6.52457689490865, 20.24));
#3370 = CARTESIAN_POINT ('', (7.90796015676233, 6.51581682651887, 20.24));
#3380 = CARTESIAN_POINT ('', (7.83688849164062, 6.58688849164051, 20.24));
#3390 = CARTESIAN_POINT ('', (7.76581682651891, 6.65796015676216, 20.24));
#3400 = CARTESIAN_POINT ('', (7.77457689490862, 6.75808819663183, 20.24));
#3410 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#3360, #3370, #3380, #3390, #3400), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (79.9999999999354, 129.999999999977, 180.000000000018), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.906307787036498, 1., 0.906307787036498, 1.))
   REPRESENTATION_ITEM ('')
);
#3420 = EDGE_CURVE ('', #3350, #3280, #3410, .T.);
#3430 = ORIENTED_EDGE ('', *, *, #3420, .F.);
#3440 = CARTESIAN_POINT ('', (18.736164892025, 7.4631619871922, 20.24));
#3450 = CARTESIAN_POINT ('', (8.008088196632, 6.5245768949086, 20.24));
#3460 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3440, #3450), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3470 = EDGE_CURVE ('', #2910, #3350, #3460, .T.);
#3480 = ORIENTED_EDGE ('', *, *, #3470, .F.);
#3490 = ORIENTED_EDGE ('', *, *, #2950, .T.);
#3500 = ORIENTED_EDGE ('', *, *, #2160, .F.);
#3510 = EDGE_LOOP ('', (#3260, #3330, #3430, #3480, #3490, #3500));
#3520 = FACE_OUTER_BOUND ('', #3510, .T.);
#3530 = CARTESIAN_POINT ('', (19.6029710538556, 19.7615095920964, 20.24));
#3540 = CARTESIAN_POINT ('', (20.7537913861451, 6.60757300294697, 20.24));
#3550 = CARTESIAN_POINT ('', (6.70460887854139, 18.6330491237048, 20.24));
#3560 = CARTESIAN_POINT ('', (7.85542921083086, 5.47911253455539, 20.24));
#3570 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3530, #3540), (#3550, #3560)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-6.09020308938761, 6.85742873401159), (-6.41045605434012, 6.79372643563537), .UNSPECIFIED.);
#3580 = ADVANCED_FACE ('', (#3520), #3570, .T.);
#3590 = ORIENTED_EDGE ('', *, *, #3470, .T.);
#3600 = CARTESIAN_POINT ('', (8.008088196632, 6.5245768949086, 20.24));
#3610 = CARTESIAN_POINT ('', (8.05902676354401, 5.9423464108726, 25.));
#3620 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3600, #3610), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3630 = EDGE_CURVE ('', #3350, #320, #3620, .T.);
#3640 = ORIENTED_EDGE ('', *, *, #3630, .T.);
#3650 = ORIENTED_EDGE ('', *, *, #360, .F.);
#3660 = ORIENTED_EDGE ('', *, *, #3000, .F.);
#3670 = EDGE_LOOP ('', (#3590, #3640, #3650, #3660));
#3680 = FACE_OUTER_BOUND ('', #3670, .T.);
#3690 = CARTESIAN_POINT ('', (18.7360218479083, 7.47722704123027, 20.1257836907653));
#3700 = CARTESIAN_POINT ('', (18.7893992121635, 6.86712097600913, 25.1136792923858));
#3710 = CARTESIAN_POINT ('', (7.95523506531708, 6.53403041386342, 20.1257836907653));
#3720 = CARTESIAN_POINT ('', (8.00861242957234, 5.92392434864227, 25.1136792923858));
#3730 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3690, #3700), (#3710, #3720)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.051828080727006, 10.7701395559631), (-4.91082082296575, 0.114533004029859), .UNSPECIFIED.);
#3740 = ADVANCED_FACE ('', (#3680), #3730, .T.);
#3750 = ORIENTED_EDGE ('', *, *, #530, .F.);
#3760 = CARTESIAN_POINT ('', (7.77457689490899, 6.7580881966318, 20.24));
#3770 = CARTESIAN_POINT ('', (7.192346410873, 6.8090267635441, 25.));
#3780 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3760, #3770), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3790 = EDGE_CURVE ('', #3280, #390, #3780, .T.);
#3800 = ORIENTED_EDGE ('', *, *, #3790, .F.);
#3810 = ORIENTED_EDGE ('', *, *, #3320, .T.);
#3820 = ORIENTED_EDGE ('', *, *, #2520, .F.);
#3830 = EDGE_LOOP ('', (#3750, #3800, #3810, #3820));
#3840 = FACE_OUTER_BOUND ('', #3830, .T.);
#3850 = CARTESIAN_POINT ('', (7.78442923811693, 6.70520017271604, 20.122523120425));
#3860 = CARTESIAN_POINT ('', (7.17352552438845, 6.75864732217316, 25.116939862726));
#3870 = CARTESIAN_POINT ('', (8.75468439345403, 17.795267345243, 20.122523120425));
#3880 = CARTESIAN_POINT ('', (8.14378067972555, 17.8487144947002, 25.116939862726));
#3890 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3850, #3860), (#3870, #3880)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.190634045188155, 11.323063472659), (-4.91410587962022, 0.117818060684293), .UNSPECIFIED.);
#3900 = ADVANCED_FACE ('', (#3840), #3890, .T.);
#3910 = ORIENTED_EDGE ('', *, *, #3420, .T.);
#3920 = ORIENTED_EDGE ('', *, *, #3790, .T.);
#3930 = ORIENTED_EDGE ('', *, *, #460, .F.);
#3940 = ORIENTED_EDGE ('', *, *, #3630, .F.);
#3950 = EDGE_LOOP ('', (#3910, #3920, #3930, #3940));
#3960 = FACE_OUTER_BOUND ('', #3950, .T.);
#3970 = CARTESIAN_POINT ('', (7.77469921223724, 6.75807749525215, 20.239));
#3980 = CARTESIAN_POINT ('', (7.19222409354401, 6.80903746492373, 25.001));
#3990 = CARTESIAN_POINT ('', (7.79347453814342, 6.97268045236093, 20.239));
#4000 = CARTESIAN_POINT ('', (7.26195938912176, 7.60611554072571, 25.001));
#4010 = CARTESIAN_POINT ('', (8.00807749525219, 6.95390512645477, 20.239));
#4020 = CARTESIAN_POINT ('', (8.05903746492373, 7.53638024514796, 25.001));
#4030 = CARTESIAN_POINT ('', (8.22268045236098, 6.9351298005486, 20.239));
#4040 = CARTESIAN_POINT ('', (8.85611554072571, 7.46664494957021, 25.001));
#4050 = CARTESIAN_POINT ('', (8.2039051264548, 6.72052684343982, 20.239));
#4060 = CARTESIAN_POINT ('', (8.78638024514797, 6.66956687376824, 25.001));
#4070 = CARTESIAN_POINT ('', (8.18512980054862, 6.50592388633104, 20.239));
#4080 = CARTESIAN_POINT ('', (8.71664494957022, 5.87248879796626, 25.001));
#4090 = CARTESIAN_POINT ('', (7.97052684343984, 6.52469921223721, 20.239));
#4100 = CARTESIAN_POINT ('', (7.91956687376825, 5.94222409354401, 25.001));
#4110 = CARTESIAN_POINT ('', (7.75592388633106, 6.54347453814337, 20.239));
#4120 = CARTESIAN_POINT ('', (7.12248879796627, 6.01195938912175, 25.001));
#4130 = CARTESIAN_POINT ('', (7.77469921223724, 6.75807749525215, 20.239));
#4140 = CARTESIAN_POINT ('', (7.19222409354401, 6.80903746492373, 25.001));
#4150 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#3970, #3980), (#3990, #4000), (#4010, #4020), (#4030, #4040), (#4050, #4060), (#4070, #4080), (#4090, #4100), (#4110, #4120), (#4130, #4140)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#4160 = ADVANCED_FACE ('', (#3960), #4150, .T.);
#4170 = CLOSED_SHELL ('', (#810, #1090, #1680, #1840, #2000, #2450, #2730, #2890, #3130, #3250, #3580, #3740, #3900, #4160));
#4180 = MANIFOLD_SOLID_BREP ('NOCUT', #4170);
#4190 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#4200 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#4210 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#4220 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #4190, 'DISTANCE_ACCURACY_VALUE', '');
#4230 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#4220))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#4190, #4200, #4210))
   REPRESENTATION_CONTEXT ('', '3D')
);
#4240 = COLOUR_RGB ('', 0.75294117647059, 0.75294117647059, 0.75294117647059);
#4250 = FILL_AREA_STYLE_COLOUR ('', #4240);
#4260 = FILL_AREA_STYLE ('', (#4250));
#4270 = SURFACE_STYLE_FILL_AREA (#4260);
#4280 = SURFACE_SIDE_STYLE ('', (#4270));
#4290 = SURFACE_STYLE_USAGE (.POSITIVE., #4280);
#4300 = PRESENTATION_STYLE_ASSIGNMENT ((#4290));
#4310 = STYLED_ITEM ('', (#4300), #4180);
#4320 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#4180), #4230);
#4330 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#4340 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #4330);
#4350 = MECHANICAL_CONTEXT ('', #4330, 'mechanical');
#4360 = PRODUCT ('NONE', '', '', (#4350));
#4370 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#4380 = PERSON ('', '', $, $, $, $);
#4390 = ORGANIZATION ($, '', '');
#4400 = PERSON_AND_ORGANIZATION (#4380, #4390);
#4410 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#4400, #4370, (#4360));
#4420 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#4360));
#4430 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #4360, .NOT_KNOWN.);
#4440 = APPROVAL_STATUS ('approved');
#4450 = APPROVAL (#4440, '');
#4460 = CALENDAR_DATE (2018, 29, 6);
#4470 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#4480 = LOCAL_TIME (8, 54, 5., #4470);
#4490 = DATE_AND_TIME (#4460, #4480);
#4500 = APPROVAL_DATE_TIME (#4490, #4450);
#4510 = APPROVAL_ROLE ('');
#4520 = PERSON ('', '', $, $, $, $);
#4530 = ORGANIZATION ($, '', '');
#4540 = PERSON_AND_ORGANIZATION (#4520, #4530);
#4550 = APPROVAL_PERSON_ORGANIZATION (#4540, #4450, #4510);
#4560 = CC_DESIGN_APPROVAL (#4450, (#4430));
#4570 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#4580 = PERSON ('', '', $, $, $, $);
#4590 = ORGANIZATION ($, '', '');
#4600 = PERSON_AND_ORGANIZATION (#4580, #4590);
#4610 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#4600, #4570, (#4430));
#4620 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#4630 = PERSON ('', '', $, $, $, $);
#4640 = ORGANIZATION ($, '', '');
#4650 = PERSON_AND_ORGANIZATION (#4630, #4640);
#4660 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#4650, #4620, (#4430));
#4670 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#4680 = SECURITY_CLASSIFICATION ('', '', #4670);
#4690 = APPROVAL_STATUS ('approved');
#4700 = APPROVAL (#4690, '');
#4710 = CALENDAR_DATE (2018, 29, 6);
#4720 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#4730 = LOCAL_TIME (8, 54, 5., #4720);
#4740 = DATE_AND_TIME (#4710, #4730);
#4750 = APPROVAL_DATE_TIME (#4740, #4700);
#4760 = APPROVAL_ROLE ('');
#4770 = PERSON ('', '', $, $, $, $);
#4780 = ORGANIZATION ($, '', '');
#4790 = PERSON_AND_ORGANIZATION (#4770, #4780);
#4800 = APPROVAL_PERSON_ORGANIZATION (#4790, #4700, #4760);
#4810 = CC_DESIGN_APPROVAL (#4700, (#4680));
#4820 = DATE_TIME_ROLE ('classification_date');
#4830 = CALENDAR_DATE (2018, 29, 6);
#4840 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#4850 = LOCAL_TIME (8, 54, 5., #4840);
#4860 = DATE_AND_TIME (#4830, #4850);
#4870 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#4860, #4820, (#4680));
#4880 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#4890 = PERSON ('', '', $, $, $, $);
#4900 = ORGANIZATION ($, '', '');
#4910 = PERSON_AND_ORGANIZATION (#4890, #4900);
#4920 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#4910, #4880, (#4680));
#4930 = CC_DESIGN_SECURITY_CLASSIFICATION (#4680, (#4430));
#4940 = DESIGN_CONTEXT ('', #4330, 'design');
#4950 = PRODUCT_DEFINITION ('', '', #4430, #4940);
#4960 = APPROVAL_STATUS ('approved');
#4970 = APPROVAL (#4960, '');
#4980 = CALENDAR_DATE (2018, 29, 6);
#4990 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#5000 = LOCAL_TIME (8, 54, 5., #4990);
#5010 = DATE_AND_TIME (#4980, #5000);
#5020 = APPROVAL_DATE_TIME (#5010, #4970);
#5030 = APPROVAL_ROLE ('');
#5040 = PERSON ('', '', $, $, $, $);
#5050 = ORGANIZATION ($, '', '');
#5060 = PERSON_AND_ORGANIZATION (#5040, #5050);
#5070 = APPROVAL_PERSON_ORGANIZATION (#5060, #4970, #5030);
#5080 = CC_DESIGN_APPROVAL (#4970, (#4950));
#5090 = DATE_TIME_ROLE ('creation_date');
#5100 = CALENDAR_DATE (2018, 29, 6);
#5110 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#5120 = LOCAL_TIME (8, 54, 5., #5110);
#5130 = DATE_AND_TIME (#5100, #5120);
#5140 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#5130, #5090, (#4950));
#5150 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#5160 = PERSON ('', '', $, $, $, $);
#5170 = ORGANIZATION ($, '', '');
#5180 = PERSON_AND_ORGANIZATION (#5160, #5170);
#5190 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#5180, #5150, (#4950));
#5200 = PRODUCT_DEFINITION_SHAPE ('', '', #4950);
#5210 = SHAPE_DEFINITION_REPRESENTATION (#5200, #4320);
#5220 = CARTESIAN_POINT ('', (11.7611987067572, 15.1781034625884, 20.24));
#5230 = VERTEX_POINT ('', #5220);
#5240 = CARTESIAN_POINT ('', (11.9733307411132, 14.9659714282324, 20.54));
#5250 = VERTEX_POINT ('', #5240);
#5260 = CARTESIAN_POINT ('', (11.7611987067574, 15.1781034625886, 20.24));
#5270 = CARTESIAN_POINT ('', (11.9733307411134, 14.9659714282327, 20.54));
#5280 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5260, #5270), .UNSPECIFIED., .F., .U., (2, 2), (0.00331125827816237, 0.996688741721843), .UNSPECIFIED.);
#5290 = EDGE_CURVE ('', #5230, #5250, #5280, .T.);
#5300 = ORIENTED_EDGE ('', *, *, #5290, .T.);
#5310 = CARTESIAN_POINT ('', (16.215971428233, 10.7233307411134, 20.54));
#5320 = VERTEX_POINT ('', #5310);
#5330 = CARTESIAN_POINT ('', (11.9733307411132, 14.9659714282324, 20.54));
#5340 = CARTESIAN_POINT ('', (9.8520103975537, 12.8446510846726, 20.54));
#5350 = CARTESIAN_POINT ('', (11.9733307411135, 10.7233307411132, 20.54));
#5360 = CARTESIAN_POINT ('', (14.0946510846734, 8.60201039755371, 20.54));
#5370 = CARTESIAN_POINT ('', (16.2159714282328, 10.7233307411136, 20.54));
#5380 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5330, #5340, #5350, #5360, #5370), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180.000000000005, 270.000000000005, 360.000000000005), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#5390 = EDGE_CURVE ('', #5250, #5320, #5380, .T.);
#5400 = ORIENTED_EDGE ('', *, *, #5390, .T.);
#5410 = CARTESIAN_POINT ('', (16.2159714282328, 10.7233307411136, 20.54));
#5420 = CARTESIAN_POINT ('', (18.3372917717923, 12.8446510846734, 20.54));
#5430 = CARTESIAN_POINT ('', (16.2159714282325, 14.9659714282328, 20.54));
#5440 = CARTESIAN_POINT ('', (14.0946510846726, 17.0872917717923, 20.54));
#5450 = CARTESIAN_POINT ('', (11.9733307411132, 14.9659714282324, 20.54));
#5460 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5410, #5420, #5430, #5440, #5450), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (4.88533199072759E-12, 90.0000000000049, 180.000000000005), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#5470 = EDGE_CURVE ('', #5320, #5250, #5460, .T.);
#5480 = ORIENTED_EDGE ('', *, *, #5470, .T.);
#5490 = ORIENTED_EDGE ('', *, *, #5290, .F.);
#5500 = CARTESIAN_POINT ('', (16.428103462589, 10.5111987067574, 20.24));
#5510 = VERTEX_POINT ('', #5500);
#5520 = CARTESIAN_POINT ('', (16.4281034625888, 10.5111987067576, 20.24));
#5530 = CARTESIAN_POINT ('', (18.7615558405042, 12.8446510846734, 20.24));
#5540 = CARTESIAN_POINT ('', (16.4281034625884, 15.1781034625888, 20.24));
#5550 = CARTESIAN_POINT ('', (14.0946510846726, 17.5115558405042, 20.24));
#5560 = CARTESIAN_POINT ('', (11.7611987067572, 15.1781034625884, 20.24));
#5570 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5520, #5530, #5540, #5550, #5560), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (4.68794483958704E-12, 90.0000000000047, 180.000000000005), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#5580 = EDGE_CURVE ('', #5510, #5230, #5570, .T.);
#5590 = ORIENTED_EDGE ('', *, *, #5580, .F.);
#5600 = CARTESIAN_POINT ('', (11.7611987067572, 15.1781034625884, 20.24));
#5610 = CARTESIAN_POINT ('', (9.42774632884178, 12.8446510846726, 20.24));
#5620 = CARTESIAN_POINT ('', (11.7611987067576, 10.5111987067572, 20.24));
#5630 = CARTESIAN_POINT ('', (14.0946510846734, 8.17774632884178, 20.24));
#5640 = CARTESIAN_POINT ('', (16.4281034625888, 10.5111987067576, 20.24));
#5650 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5600, #5610, #5620, #5630, #5640), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180.000000000005, 270.000000000005, 360.000000000005), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#5660 = EDGE_CURVE ('', #5230, #5510, #5650, .T.);
#5670 = ORIENTED_EDGE ('', *, *, #5660, .F.);
#5680 = EDGE_LOOP ('', (#5300, #5400, #5480, #5490, #5590, #5670));
#5690 = FACE_OUTER_BOUND ('', #5680, .T.);
#5700 = CARTESIAN_POINT ('', (11.9740378478946, 14.9652643214515, 20.541));
#5710 = CARTESIAN_POINT ('', (11.7604915999762, 15.1788105693698, 20.239));
#5720 = CARTESIAN_POINT ('', (9.85342461111608, 12.844651084673, 20.5410000000004));
#5730 = CARTESIAN_POINT ('', (9.42633211527939, 12.844651084673, 20.2390000000005));
#5740 = CARTESIAN_POINT ('', (11.9740378478945, 10.7240378478946, 20.5410000000004));
#5750 = CARTESIAN_POINT ('', (11.7604915999762, 10.5104915999762, 20.2390000000005));
#5760 = CARTESIAN_POINT ('', (14.094651084673, 8.60342461111613, 20.5410000000004));
#5770 = CARTESIAN_POINT ('', (14.094651084673, 8.17633211527943, 20.2390000000005));
#5780 = CARTESIAN_POINT ('', (16.2152643214514, 10.7240378478946, 20.541));
#5790 = CARTESIAN_POINT ('', (16.4288105693697, 10.5104915999762, 20.239));
#5800 = CARTESIAN_POINT ('', (18.3358775582299, 12.844651084673, 20.5409999999996));
#5810 = CARTESIAN_POINT ('', (18.7629700540665, 12.844651084673, 20.2389999999995));
#5820 = CARTESIAN_POINT ('', (16.2152643214515, 14.9652643214515, 20.5409999999996));
#5830 = CARTESIAN_POINT ('', (16.4288105693697, 15.1788105693698, 20.2389999999995));
#5840 = CARTESIAN_POINT ('', (14.094651084673, 17.0858775582299, 20.5409999999996));
#5850 = CARTESIAN_POINT ('', (14.094651084673, 17.5129700540666, 20.2389999999995));
#5860 = CARTESIAN_POINT ('', (11.9740378478946, 14.9652643214515, 20.541));
#5870 = CARTESIAN_POINT ('', (11.7604915999762, 15.1788105693698, 20.239));
#5880 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#5700, #5710), (#5720, #5730), (#5740, #5750), (#5760, #5770), (#5780, #5790), (#5800, #5810), (#5820, #5830), (#5840, #5850), (#5860, #5870)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#5890 = ADVANCED_FACE ('', (#5690), #5880, .T.);
#5900 = ORIENTED_EDGE ('', *, *, #5470, .F.);
#5910 = ORIENTED_EDGE ('', *, *, #5390, .F.);
#5920 = EDGE_LOOP ('', (#5900, #5910));
#5930 = FACE_OUTER_BOUND ('', #5920, .T.);
#5940 = CARTESIAN_POINT ('', (16.039194732936, 10.90010743641, 20.54));
#5950 = VERTEX_POINT ('', #5940);
#5960 = CARTESIAN_POINT ('', (12.15010743641, 14.789194732936, 20.54));
#5970 = VERTEX_POINT ('', #5960);
#5980 = CARTESIAN_POINT ('', (16.039194732936, 10.90010743641, 20.54));
#5990 = CARTESIAN_POINT ('', (17.983738381199, 12.844651084673, 20.54));
#6000 = CARTESIAN_POINT ('', (16.039194732936, 14.789194732936, 20.54));
#6010 = CARTESIAN_POINT ('', (14.094651084673, 16.733738381199, 20.54));
#6020 = CARTESIAN_POINT ('', (12.15010743641, 14.789194732936, 20.54));
#6030 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5980, #5990, #6000, #6010, #6020), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 90., 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#6040 = EDGE_CURVE ('', #5950, #5970, #6030, .T.);
#6050 = ORIENTED_EDGE ('', *, *, #6040, .T.);
#6060 = CARTESIAN_POINT ('', (12.15010743641, 14.789194732936, 20.54));
#6070 = CARTESIAN_POINT ('', (10.205563788147, 12.844651084673, 20.54));
#6080 = CARTESIAN_POINT ('', (12.15010743641, 10.90010743641, 20.54));
#6090 = CARTESIAN_POINT ('', (14.094651084673, 8.95556378814699, 20.54));
#6100 = CARTESIAN_POINT ('', (16.039194732936, 10.90010743641, 20.54));
#6110 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#6060, #6070, #6080, #6090, #6100), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#6120 = EDGE_CURVE ('', #5970, #5950, #6110, .T.);
#6130 = ORIENTED_EDGE ('', *, *, #6120, .T.);
#6140 = EDGE_LOOP ('', (#6050, #6130));
#6150 = FACE_BOUND ('', #6140, .T.);
#6160 = CARTESIAN_POINT ('', (9.11410992556216, 17.0238213343461, 20.54));
#6170 = CARTESIAN_POINT ('', (9.91548083499984, 7.8641099255622, 20.54));
#6180 = CARTESIAN_POINT ('', (18.2738213343461, 17.8251922437838, 20.54));
#6190 = CARTESIAN_POINT ('', (19.0751922437838, 8.66548083499987, 20.54));
#6200 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#6160, #6170), (#6180, #6190)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.74933563130622, 6.44536438700322), (-6.79972778312173, 2.3949722351877), .UNSPECIFIED.);
#6210 = ADVANCED_FACE ('', (#5930, #6150), #6200, .T.);
#6220 = CARTESIAN_POINT ('', (12.15010743641, 14.789194732936, 21.9444400873833));
#6230 = VERTEX_POINT ('', #6220);
#6240 = CARTESIAN_POINT ('', (12.15010743641, 14.789194732936, 21.9444400873833));
#6250 = CARTESIAN_POINT ('', (12.15010743641, 14.789194732936, 20.54));
#6260 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6240, #6250), .UNSPECIFIED., .F., .U., (2, 2), (0.0839258458340864, 0.916074154165914), .UNSPECIFIED.);
#6270 = EDGE_CURVE ('', #6230, #5970, #6260, .T.);
#6280 = ORIENTED_EDGE ('', *, *, #6270, .T.);
#6290 = ORIENTED_EDGE ('', *, *, #6040, .F.);
#6300 = ORIENTED_EDGE ('', *, *, #6120, .F.);
#6310 = ORIENTED_EDGE ('', *, *, #6270, .F.);
#6320 = CARTESIAN_POINT ('', (14.3343293772291, 10.1051156649207, 21.9444400873833));
#6330 = VERTEX_POINT ('', #6320);
#6340 = CARTESIAN_POINT ('', (12.15010743641, 14.789194732936, 21.9444400873833));
#6350 = CARTESIAN_POINT ('', (10.205563788147, 12.844651084673, 21.9444400873833));
#6360 = CARTESIAN_POINT ('', (12.15010743641, 10.90010743641, 21.9444400873833));
#6370 = CARTESIAN_POINT ('', (13.0568630312117, 9.99335184160827, 21.9444400873833));
#6380 = CARTESIAN_POINT ('', (14.3343293772291, 10.1051156649207, 21.9444400873833));
#6390 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#6340, #6350, #6360, #6370, #6380), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 270., 319.743307823209), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.838116916191467, 0.85518050058867))
   REPRESENTATION_ITEM ('')
);
#6400 = EDGE_CURVE ('', #6230, #6330, #6390, .T.);
#6410 = ORIENTED_EDGE ('', *, *, #6400, .T.);
#6420 = CARTESIAN_POINT ('', (16.039194732936, 10.90010743641, 21.9444400873833));
#6430 = VERTEX_POINT ('', #6420);
#6440 = CARTESIAN_POINT ('', (14.3343293772291, 10.1051156649207, 21.9444400873833));
#6450 = CARTESIAN_POINT ('', (15.3314387257369, 10.1923514292109, 21.9444400873833));
#6460 = CARTESIAN_POINT ('', (16.039194732936, 10.90010743641, 21.9444400873833));
#6470 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#6440, #6450, #6460), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (319.743307823209, 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.85518050058867, 0.868989864995081, 1.))
   REPRESENTATION_ITEM ('')
);
#6480 = EDGE_CURVE ('', #6330, #6430, #6470, .T.);
#6490 = ORIENTED_EDGE ('', *, *, #6480, .T.);
#6500 = CARTESIAN_POINT ('', (16.039194732936, 10.90010743641, 21.9444400873833));
#6510 = CARTESIAN_POINT ('', (17.983738381199, 12.844651084673, 21.9444400873833));
#6520 = CARTESIAN_POINT ('', (16.039194732936, 14.789194732936, 21.9444400873833));
#6530 = CARTESIAN_POINT ('', (14.094651084673, 16.733738381199, 21.9444400873833));
#6540 = CARTESIAN_POINT ('', (12.15010743641, 14.789194732936, 21.9444400873833));
#6550 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#6500, #6510, #6520, #6530, #6540), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 90., 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#6560 = EDGE_CURVE ('', #6430, #6230, #6550, .T.);
#6570 = ORIENTED_EDGE ('', *, *, #6560, .T.);
#6580 = EDGE_LOOP ('', (#6280, #6290, #6300, #6310, #6410, #6490, #6570));
#6590 = FACE_OUTER_BOUND ('', #6580, .T.);
#6600 = CARTESIAN_POINT ('', (12.15010743641, 14.789194732936, 20.3983559912617));
#6610 = CARTESIAN_POINT ('', (12.15010743641, 14.789194732936, 22.0860840961216));
#6620 = CARTESIAN_POINT ('', (14.094651084673, 16.733738381199, 20.3983559912617));
#6630 = CARTESIAN_POINT ('', (14.094651084673, 16.733738381199, 22.0860840961216));
#6640 = CARTESIAN_POINT ('', (16.039194732936, 14.789194732936, 20.3983559912617));
#6650 = CARTESIAN_POINT ('', (16.039194732936, 14.789194732936, 22.0860840961216));
#6660 = CARTESIAN_POINT ('', (17.983738381199, 12.844651084673, 20.3983559912617));
#6670 = CARTESIAN_POINT ('', (17.983738381199, 12.844651084673, 22.0860840961216));
#6680 = CARTESIAN_POINT ('', (16.039194732936, 10.90010743641, 20.3983559912617));
#6690 = CARTESIAN_POINT ('', (16.039194732936, 10.90010743641, 22.0860840961216));
#6700 = CARTESIAN_POINT ('', (14.094651084673, 8.95556378814696, 20.3983559912617));
#6710 = CARTESIAN_POINT ('', (14.094651084673, 8.95556378814696, 22.0860840961216));
#6720 = CARTESIAN_POINT ('', (12.15010743641, 10.90010743641, 20.3983559912617));
#6730 = CARTESIAN_POINT ('', (12.15010743641, 10.90010743641, 22.0860840961216));
#6740 = CARTESIAN_POINT ('', (10.205563788147, 12.844651084673, 20.3983559912617));
#6750 = CARTESIAN_POINT ('', (10.205563788147, 12.844651084673, 22.0860840961216));
#6760 = CARTESIAN_POINT ('', (12.15010743641, 14.789194732936, 20.3983559912617));
#6770 = CARTESIAN_POINT ('', (12.15010743641, 14.789194732936, 22.0860840961216));
#6780 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#6600, #6610), (#6620, #6630), (#6640, #6650), (#6660, #6670), (#6680, #6690), (#6700, #6710), (#6720, #6730), (#6740, #6750), (#6760, #6770)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.750000000000001, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#6790 = ADVANCED_FACE ('', (#6590), #6780, .T.);
#6800 = CARTESIAN_POINT ('', (14.4024289128539, 9.32673441093622, 23.76));
#6810 = VERTEX_POINT ('', #6800);
#6820 = CARTESIAN_POINT ('', (14.3343293772291, 10.1051156649207, 21.9444400873833));
#6830 = CARTESIAN_POINT ('', (14.3343293772291, 10.1051156649207, 23.0203541049981));
#6840 = CARTESIAN_POINT ('', (14.4024289128538, 9.3267344109362, 23.76));
#6850 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#6820, #6830, #6840), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0.5, 0.629136860396751), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.848706757163729, 0.853713789360412))
   REPRESENTATION_ITEM ('')
);
#6860 = EDGE_CURVE ('', #6330, #6810, #6850, .T.);
#6870 = ORIENTED_EDGE ('', *, *, #6860, .T.);
#6880 = CARTESIAN_POINT ('', (16.591695829454, 10.3476063398922, 23.76));
#6890 = VERTEX_POINT ('', #6880);
#6900 = CARTESIAN_POINT ('', (14.402428912854, 9.32673441093622, 23.76));
#6910 = CARTESIAN_POINT ('', (15.6828458687229, 9.43875637916119, 23.76));
#6920 = CARTESIAN_POINT ('', (16.5916958294539, 10.3476063398923, 23.76));
#6930 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#6900, #6910, #6920), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (319.74330782321, 360.000000000002), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.85518050058867, 0.868989864995078, 1.))
   REPRESENTATION_ITEM ('')
);
#6940 = EDGE_CURVE ('', #6810, #6890, #6930, .T.);
#6950 = ORIENTED_EDGE ('', *, *, #6940, .T.);
#6960 = CARTESIAN_POINT ('', (11.5976063398921, 15.3416958294537, 23.76));
#6970 = VERTEX_POINT ('', #6960);
#6980 = CARTESIAN_POINT ('', (16.5916958294539, 10.3476063398923, 23.76));
#6990 = CARTESIAN_POINT ('', (19.0887405742346, 12.8446510846732, 23.76));
#7000 = CARTESIAN_POINT ('', (16.5916958294537, 15.3416958294539, 23.76));
#7010 = CARTESIAN_POINT ('', (14.0946510846728, 17.8387405742346, 23.76));
#7020 = CARTESIAN_POINT ('', (11.5976063398921, 15.3416958294537, 23.76));
#7030 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#6980, #6990, #7000, #7010, #7020), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (2.07512383561297E-12, 90.0000000000021, 180.000000000002), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#7040 = EDGE_CURVE ('', #6890, #6970, #7030, .T.);
#7050 = ORIENTED_EDGE ('', *, *, #7040, .T.);
#7060 = CARTESIAN_POINT ('', (11.5976063398921, 15.3416958294537, 23.76));
#7070 = CARTESIAN_POINT ('', (9.10056159511135, 12.8446510846728, 23.76));
#7080 = CARTESIAN_POINT ('', (11.5976063398923, 10.3476063398921, 23.76));
#7090 = CARTESIAN_POINT ('', (12.7619974271393, 9.18321525264512, 23.76));
#7100 = CARTESIAN_POINT ('', (14.402428912854, 9.32673441093622, 23.76));
#7110 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#7060, #7070, #7080, #7090, #7100), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180.000000000002, 270.000000000002, 319.74330782321), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.838116916191469, 0.85518050058867))
   REPRESENTATION_ITEM ('')
);
#7120 = EDGE_CURVE ('', #6970, #6810, #7110, .T.);
#7130 = ORIENTED_EDGE ('', *, *, #7120, .T.);
#7140 = ORIENTED_EDGE ('', *, *, #6860, .F.);
#7150 = ORIENTED_EDGE ('', *, *, #6400, .F.);
#7160 = ORIENTED_EDGE ('', *, *, #6560, .F.);
#7170 = ORIENTED_EDGE ('', *, *, #6480, .F.);
#7180 = EDGE_LOOP ('', (#6870, #6950, #7050, #7130, #7140, #7150, #7160, #7170));
#7190 = FACE_OUTER_BOUND ('', #7180, .T.);
#7200 = CARTESIAN_POINT ('', (14.7701080909673, 5.12414217446196, 21.9444400873833));
#7210 = CARTESIAN_POINT ('', (14.7701080909673, 5.12414217446196, 24.4444400873833));
#7220 = CARTESIAN_POINT ('', (14.5522187340982, 7.61462891969133, 24.4444400873833));
#7230 = CARTESIAN_POINT ('', (14.3343293772291, 10.1051156649207, 24.4444400873833));
#7240 = CARTESIAN_POINT ('', (14.3343293772291, 10.1051156649207, 21.9444400873833));
#7250 = CARTESIAN_POINT ('', (14.3343293772291, 10.1051156649207, 19.4444400873833));
#7260 = CARTESIAN_POINT ('', (14.5522187340982, 7.61462891969133, 19.4444400873833));
#7270 = CARTESIAN_POINT ('', (14.7701080909673, 5.12414217446196, 19.4444400873833));
#7280 = CARTESIAN_POINT ('', (14.7701080909673, 5.12414217446196, 21.9444400873833));
#7290 = CARTESIAN_POINT ('', (22.4906170011784, 5.79959918075631, 21.9444400873833));
#7300 = CARTESIAN_POINT ('', (22.4906170011784, 5.79959918075631, 24.4444400873833));
#7310 = CARTESIAN_POINT ('', (19.7822408990799, 8.07219656911654, 24.4444400873833));
#7320 = CARTESIAN_POINT ('', (17.0738647969814, 10.3447939574768, 24.4444400873833));
#7330 = CARTESIAN_POINT ('', (17.0738647969814, 10.3447939574768, 21.9444400873833));
#7340 = CARTESIAN_POINT ('', (17.0738647969814, 10.3447939574768, 19.4444400873833));
#7350 = CARTESIAN_POINT ('', (19.7822408990799, 8.07219656911654, 19.4444400873833));
#7360 = CARTESIAN_POINT ('', (22.4906170011784, 5.79959918075631, 19.4444400873833));
#7370 = CARTESIAN_POINT ('', (22.4906170011784, 5.79959918075631, 21.9444400873833));
#7380 = CARTESIAN_POINT ('', (21.815159994884, 13.5201080909674, 21.9444400873833));
#7390 = CARTESIAN_POINT ('', (21.815159994884, 13.5201080909674, 24.4444400873833));
#7400 = CARTESIAN_POINT ('', (19.3246732496547, 13.3022187340982, 24.4444400873833));
#7410 = CARTESIAN_POINT ('', (16.8341865044253, 13.0843293772291, 24.4444400873833));
#7420 = CARTESIAN_POINT ('', (16.8341865044253, 13.0843293772291, 21.9444400873833));
#7430 = CARTESIAN_POINT ('', (16.8341865044253, 13.0843293772291, 19.4444400873833));
#7440 = CARTESIAN_POINT ('', (19.3246732496547, 13.3022187340982, 19.4444400873833));
#7450 = CARTESIAN_POINT ('', (21.815159994884, 13.5201080909674, 19.4444400873833));
#7460 = CARTESIAN_POINT ('', (21.815159994884, 13.5201080909674, 21.9444400873833));
#7470 = CARTESIAN_POINT ('', (21.1397029885897, 21.2406170011784, 21.9444400873833));
#7480 = CARTESIAN_POINT ('', (21.1397029885897, 21.2406170011784, 24.4444400873833));
#7490 = CARTESIAN_POINT ('', (18.8671056002295, 18.5322408990799, 24.4444400873833));
#7500 = CARTESIAN_POINT ('', (16.5945082118692, 15.8238647969814, 24.4444400873833));
#7510 = CARTESIAN_POINT ('', (16.5945082118692, 15.8238647969814, 21.9444400873833));
#7520 = CARTESIAN_POINT ('', (16.5945082118692, 15.8238647969814, 19.4444400873833));
#7530 = CARTESIAN_POINT ('', (18.8671056002295, 18.5322408990799, 19.4444400873833));
#7540 = CARTESIAN_POINT ('', (21.1397029885897, 21.2406170011784, 19.4444400873833));
#7550 = CARTESIAN_POINT ('', (21.1397029885897, 21.2406170011784, 21.9444400873833));
#7560 = CARTESIAN_POINT ('', (13.4191940783786, 20.5651599948841, 21.9444400873833));
#7570 = CARTESIAN_POINT ('', (13.4191940783786, 20.5651599948841, 24.4444400873833));
#7580 = CARTESIAN_POINT ('', (13.6370834352478, 18.0746732496547, 24.4444400873833));
#7590 = CARTESIAN_POINT ('', (13.8549727921169, 15.5841865044253, 24.4444400873833));
#7600 = CARTESIAN_POINT ('', (13.8549727921169, 15.5841865044253, 21.9444400873833));
#7610 = CARTESIAN_POINT ('', (13.8549727921169, 15.5841865044253, 19.4444400873833));
#7620 = CARTESIAN_POINT ('', (13.6370834352478, 18.0746732496547, 19.4444400873833));
#7630 = CARTESIAN_POINT ('', (13.4191940783786, 20.5651599948841, 19.4444400873833));
#7640 = CARTESIAN_POINT ('', (13.4191940783786, 20.5651599948841, 21.9444400873833));
#7650 = CARTESIAN_POINT ('', (5.6986851681676, 19.8897029885897, 21.9444400873833));
#7660 = CARTESIAN_POINT ('', (5.6986851681676, 19.8897029885897, 24.4444400873833));
#7670 = CARTESIAN_POINT ('', (8.4070612702661, 17.6171056002295, 24.4444400873833));
#7680 = CARTESIAN_POINT ('', (11.1154373723646, 15.3445082118692, 24.4444400873833));
#7690 = CARTESIAN_POINT ('', (11.1154373723646, 15.3445082118692, 21.9444400873833));
#7700 = CARTESIAN_POINT ('', (11.1154373723646, 15.3445082118692, 19.4444400873833));
#7710 = CARTESIAN_POINT ('', (8.4070612702661, 17.6171056002295, 19.4444400873833));
#7720 = CARTESIAN_POINT ('', (5.6986851681676, 19.8897029885897, 19.4444400873833));
#7730 = CARTESIAN_POINT ('', (5.6986851681676, 19.8897029885897, 21.9444400873833));
#7740 = CARTESIAN_POINT ('', (6.37414217446195, 12.1691940783787, 21.9444400873833));
#7750 = CARTESIAN_POINT ('', (6.37414217446195, 12.1691940783787, 24.4444400873833));
#7760 = CARTESIAN_POINT ('', (8.86462891969131, 12.3870834352478, 24.4444400873833));
#7770 = CARTESIAN_POINT ('', (11.3551156649207, 12.6049727921169, 24.4444400873833));
#7780 = CARTESIAN_POINT ('', (11.3551156649207, 12.6049727921169, 21.9444400873833));
#7790 = CARTESIAN_POINT ('', (11.3551156649207, 12.6049727921169, 19.4444400873833));
#7800 = CARTESIAN_POINT ('', (8.86462891969131, 12.3870834352478, 19.4444400873833));
#7810 = CARTESIAN_POINT ('', (6.37414217446195, 12.1691940783787, 19.4444400873833));
#7820 = CARTESIAN_POINT ('', (6.37414217446195, 12.1691940783787, 21.9444400873833));
#7830 = CARTESIAN_POINT ('', (7.0495991807563, 4.44868516816761, 21.9444400873833));
#7840 = CARTESIAN_POINT ('', (7.0495991807563, 4.44868516816761, 24.4444400873833));
#7850 = CARTESIAN_POINT ('', (9.32219656911653, 7.15706127026611, 24.4444400873833));
#7860 = CARTESIAN_POINT ('', (11.5947939574768, 9.86543737236461, 24.4444400873833));
#7870 = CARTESIAN_POINT ('', (11.5947939574768, 9.86543737236461, 21.9444400873833));
#7880 = CARTESIAN_POINT ('', (11.5947939574768, 9.86543737236461, 19.4444400873833));
#7890 = CARTESIAN_POINT ('', (9.32219656911653, 7.15706127026611, 19.4444400873833));
#7900 = CARTESIAN_POINT ('', (7.0495991807563, 4.44868516816761, 19.4444400873833));
#7910 = CARTESIAN_POINT ('', (7.0495991807563, 4.44868516816761, 21.9444400873833));
#7920 = CARTESIAN_POINT ('', (14.7701080909673, 5.12414217446196, 21.9444400873833));
#7930 = CARTESIAN_POINT ('', (14.7701080909673, 5.12414217446196, 24.4444400873833));
#7940 = CARTESIAN_POINT ('', (14.5522187340982, 7.61462891969133, 24.4444400873833));
#7950 = CARTESIAN_POINT ('', (14.3343293772291, 10.1051156649207, 24.4444400873833));
#7960 = CARTESIAN_POINT ('', (14.3343293772291, 10.1051156649207, 21.9444400873833));
#7970 = CARTESIAN_POINT ('', (14.3343293772291, 10.1051156649207, 19.4444400873833));
#7980 = CARTESIAN_POINT ('', (14.5522187340982, 7.61462891969133, 19.4444400873833));
#7990 = CARTESIAN_POINT ('', (14.7701080909673, 5.12414217446196, 19.4444400873833));
#8000 = CARTESIAN_POINT ('', (14.7701080909673, 5.12414217446196, 21.9444400873833));
#8010 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 2, ((#7200, #7210, #7220, #7230, #7240, #7250, #7260, #7270, #7280), (#7290, #7300, #7310, #7320, #7330, #7340, #7350, #7360, #7370), (#7380, #7390, #7400, #7410, #7420, #7430, #7440, #7450, #7460), (#7470, #7480, #7490, #7500, #7510, #7520, #7530, #7540, #7550), (#7560, #7570, #7580, #7590, #7600, #7610, #7620, #7630, #7640), (#7650, #7660, #7670, #7680, #7690, #7700, #7710, #7720, #7730), (#7740, #7750, #7760, #7770, #7780, #7790, #7800, #7810, #7820), (#7830, #7840, #7850, #7860, #7870, #7880, #7890, #7900, #7910), (#7920, #7930, #7940, #7950, #7960, #7970, #7980, #7990, #8000)), .UNSPECIFIED., .T., .T., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (3, 2, 2, 2, 3), (0., 0.25, 0.5, 0.75, 1.), (0., 0.25, 0.5, 0.75, 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.), (0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548), (1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.), (0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548), (1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.), (0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548), (1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.), (0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548), (1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.)))
   REPRESENTATION_ITEM ('')
);
#8020 = ADVANCED_FACE ('', (#7190), #8010, .T.);
#8030 = CARTESIAN_POINT ('', (11.4430006552234, 15.4963015141225, 25.));
#8040 = VERTEX_POINT ('', #8030);
#8050 = CARTESIAN_POINT ('', (11.4430006552234, 15.4963015141225, 25.));
#8060 = CARTESIAN_POINT ('', (11.5976063398921, 15.3416958294538, 23.76));
#8070 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8050, #8060), .UNSPECIFIED., .F., .U., (2, 2), (0.00080515297906858, 0.999194847020934), .UNSPECIFIED.);
#8080 = EDGE_CURVE ('', #8040, #6970, #8070, .T.);
#8090 = ORIENTED_EDGE ('', *, *, #8080, .T.);
#8100 = ORIENTED_EDGE ('', *, *, #7040, .F.);
#8110 = ORIENTED_EDGE ('', *, *, #6940, .F.);
#8120 = ORIENTED_EDGE ('', *, *, #7120, .F.);
#8130 = ORIENTED_EDGE ('', *, *, #8080, .F.);
#8140 = CARTESIAN_POINT ('', (16.746301514123, 10.1930006552235, 25.));
#8150 = VERTEX_POINT ('', #8140);
#8160 = CARTESIAN_POINT ('', (16.7463015141226, 10.1930006552235, 25.));
#8170 = CARTESIAN_POINT ('', (14.094651084673, 7.54135022577389, 25.));
#8180 = CARTESIAN_POINT ('', (11.4430006552234, 10.1930006552234, 25.));
#8190 = CARTESIAN_POINT ('', (8.79135022577387, 12.844651084673, 25.));
#8200 = CARTESIAN_POINT ('', (11.4430006552234, 15.4963015141225, 25.));
#8210 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#8160, #8170, #8180, #8190, #8200), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 90., 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#8220 = EDGE_CURVE ('', #8150, #8040, #8210, .T.);
#8230 = ORIENTED_EDGE ('', *, *, #8220, .F.);
#8240 = CARTESIAN_POINT ('', (11.4430006552234, 15.4963015141225, 25.));
#8250 = CARTESIAN_POINT ('', (14.094651084673, 18.1479519435721, 25.));
#8260 = CARTESIAN_POINT ('', (16.7463015141225, 15.4963015141226, 25.));
#8270 = CARTESIAN_POINT ('', (19.3979519435721, 12.844651084673, 25.));
#8280 = CARTESIAN_POINT ('', (16.7463015141226, 10.1930006552235, 25.));
#8290 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#8240, #8250, #8260, #8270, #8280), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#8300 = EDGE_CURVE ('', #8040, #8150, #8290, .T.);
#8310 = ORIENTED_EDGE ('', *, *, #8300, .F.);
#8320 = EDGE_LOOP ('', (#8090, #8100, #8110, #8120, #8130, #8230, #8310));
#8330 = FACE_OUTER_BOUND ('', #8320, .T.);
#8340 = CARTESIAN_POINT ('', (11.5977310218959, 15.34157114745, 23.759));
#8350 = CARTESIAN_POINT ('', (11.4428759732197, 15.4964261961263, 25.001));
#8360 = CARTESIAN_POINT ('', (14.0946510846729, 17.8384912102271, 23.7589999999999));
#8370 = CARTESIAN_POINT ('', (14.094651084673, 18.1482013075796, 25.0009999999999));
#8380 = CARTESIAN_POINT ('', (16.59157114745, 15.34157114745, 23.7589999999999));
#8390 = CARTESIAN_POINT ('', (16.7464261961263, 15.4964261961263, 25.0009999999999));
#8400 = CARTESIAN_POINT ('', (19.0884912102271, 12.844651084673, 23.7589999999999));
#8410 = CARTESIAN_POINT ('', (19.3982013075796, 12.8446510846731, 25.0009999999999));
#8420 = CARTESIAN_POINT ('', (16.59157114745, 10.347731021896, 23.759));
#8430 = CARTESIAN_POINT ('', (16.7464261961263, 10.1928759732197, 25.001));
#8440 = CARTESIAN_POINT ('', (14.094651084673, 7.85081095911888, 23.7590000000001));
#8450 = CARTESIAN_POINT ('', (14.094651084673, 7.54110086176637, 25.0010000000001));
#8460 = CARTESIAN_POINT ('', (11.5977310218959, 10.3477310218959, 23.7590000000001));
#8470 = CARTESIAN_POINT ('', (11.4428759732197, 10.1928759732197, 25.0010000000001));
#8480 = CARTESIAN_POINT ('', (9.10081095911886, 12.8446510846729, 23.7590000000001));
#8490 = CARTESIAN_POINT ('', (8.79110086176635, 12.844651084673, 25.0010000000001));
#8500 = CARTESIAN_POINT ('', (11.5977310218959, 15.34157114745, 23.759));
#8510 = CARTESIAN_POINT ('', (11.4428759732197, 15.4964261961263, 25.001));
#8520 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#8340, #8350), (#8360, #8370), (#8380, #8390), (#8400, #8410), (#8420, #8430), (#8440, #8450), (#8460, #8470), (#8480, #8490), (#8500, #8510)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#8530 = ADVANCED_FACE ('', (#8330), #8520, .T.);
#8540 = CARTESIAN_POINT ('', (8.008088196632, 6.5245768949086, 20.24));
#8550 = VERTEX_POINT ('', #8540);
#8560 = CARTESIAN_POINT ('', (19.236433135018, 7.5069297871762, 20.24));
#8570 = VERTEX_POINT ('', #8560);
#8580 = CARTESIAN_POINT ('', (8.008088196632, 6.5245768949086, 20.24));
#8590 = CARTESIAN_POINT ('', (19.236433135018, 7.5069297871762, 20.24));
#8600 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8580, #8590), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#8610 = EDGE_CURVE ('', #8550, #8570, #8600, .T.);
#8620 = ORIENTED_EDGE ('', *, *, #8610, .T.);
#8630 = CARTESIAN_POINT ('', (19.287371701931, 6.9246993031401, 25.));
#8640 = VERTEX_POINT ('', #8630);
#8650 = CARTESIAN_POINT ('', (19.287371701931, 6.9246993031401, 25.));
#8660 = CARTESIAN_POINT ('', (19.236433135018, 7.5069297871762, 20.24));
#8670 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8650, #8660), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#8680 = EDGE_CURVE ('', #8640, #8570, #8670, .T.);
#8690 = ORIENTED_EDGE ('', *, *, #8680, .F.);
#8700 = CARTESIAN_POINT ('', (8.05902676354401, 5.9423464108726, 25.));
#8710 = VERTEX_POINT ('', #8700);
#8720 = CARTESIAN_POINT ('', (19.287371701931, 6.9246993031401, 25.));
#8730 = CARTESIAN_POINT ('', (8.05902676354401, 5.9423464108726, 25.));
#8740 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8720, #8730), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#8750 = EDGE_CURVE ('', #8640, #8710, #8740, .T.);
#8760 = ORIENTED_EDGE ('', *, *, #8750, .T.);
#8770 = CARTESIAN_POINT ('', (8.05902676354401, 5.9423464108726, 25.));
#8780 = CARTESIAN_POINT ('', (8.008088196632, 6.5245768949086, 20.24));
#8790 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8770, #8780), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#8800 = EDGE_CURVE ('', #8710, #8550, #8790, .T.);
#8810 = ORIENTED_EDGE ('', *, *, #8800, .T.);
#8820 = EDGE_LOOP ('', (#8620, #8690, #8760, #8810));
#8830 = FACE_OUTER_BOUND ('', #8820, .T.);
#8840 = CARTESIAN_POINT ('', (7.9551786257214, 6.53467552139413, 20.1205096422048));
#8850 = CARTESIAN_POINT ('', (8.00867461598921, 5.92321355464519, 25.1194903577952));
#8860 = CARTESIAN_POINT ('', (19.2867852825738, 7.52606264340361, 20.1205096422048));
#8870 = CARTESIAN_POINT ('', (19.3402812728416, 6.91460067665468, 25.1194903577952));
#8880 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#8840, #8850), (#8860, #8870)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.051828080727006, 11.3230634726596), (-4.91613447871039, 0.12038770952627), .UNSPECIFIED.);
#8890 = ADVANCED_FACE ('', (#8830), #8880, .T.);
#8900 = CARTESIAN_POINT ('', (19.43237238217, 7.7028690343278, 20.24));
#8910 = VERTEX_POINT ('', #8900);
#8920 = CARTESIAN_POINT ('', (19.236433135018, 7.50692978717606, 20.24));
#8930 = CARTESIAN_POINT ('', (19.4166090336036, 7.52269313574226, 20.24));
#8940 = CARTESIAN_POINT ('', (19.4323723821704, 7.70286903432777, 20.24));
#8950 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#8920, #8930, #8940), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (179.999999999804, 260.000000000012), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.76604444311781, 1.))
   REPRESENTATION_ITEM ('')
);
#8960 = EDGE_CURVE ('', #8570, #8910, #8950, .T.);
#8970 = ORIENTED_EDGE ('', *, *, #8960, .T.);
#8980 = CARTESIAN_POINT ('', (20.014602866206, 7.6519304674154, 25.));
#8990 = VERTEX_POINT ('', #8980);
#9000 = CARTESIAN_POINT ('', (20.014602866206, 7.6519304674154, 25.));
#9010 = CARTESIAN_POINT ('', (19.43237238217, 7.7028690343278, 20.24));
#9020 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9000, #9010), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9030 = EDGE_CURVE ('', #8990, #8910, #9020, .T.);
#9040 = ORIENTED_EDGE ('', *, *, #9030, .F.);
#9050 = CARTESIAN_POINT ('', (20.0146028662064, 7.65193046741537, 25.));
#9060 = CARTESIAN_POINT ('', (19.9560969849308, 6.98320518441562, 25.));
#9070 = CARTESIAN_POINT ('', (19.287371701931, 6.92469930314009, 25.));
#9080 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#9050, #9060, #9070), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (100., 180.00000000001), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.766044443118924, 1.))
   REPRESENTATION_ITEM ('')
);
#9090 = EDGE_CURVE ('', #8990, #8640, #9080, .T.);
#9100 = ORIENTED_EDGE ('', *, *, #9090, .T.);
#9110 = ORIENTED_EDGE ('', *, *, #8680, .T.);
#9120 = EDGE_LOOP ('', (#8970, #9040, #9100, #9110));
#9130 = FACE_OUTER_BOUND ('', #9120, .T.);
#9140 = CARTESIAN_POINT ('', (19.0791760617659, 7.55663169511202, 20.239));
#9150 = CARTESIAN_POINT ('', (18.7033380955891, 7.10872544868794, 25.001));
#9160 = CARTESIAN_POINT ('', (19.2303921169325, 7.42974635899353, 20.239));
#9170 = CARTESIAN_POINT ('', (19.2649846073912, 6.63744806778241, 25.001));
#9180 = CARTESIAN_POINT ('', (19.3699739636427, 7.56932820570366, 20.239));
#9190 = CARTESIAN_POINT ('', (19.7834193544776, 7.1558828148684, 25.001));
#9200 = CARTESIAN_POINT ('', (19.509555810353, 7.7089100524138, 20.239));
#9210 = CARTESIAN_POINT ('', (20.3018541015641, 7.67431756195441, 25.001));
#9220 = CARTESIAN_POINT ('', (19.3826704742346, 7.86012610758052, 20.239));
#9230 = CARTESIAN_POINT ('', (19.830576720659, 8.2359640737569, 25.001));
#9240 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#9140, #9150), (#9160, #9170), (#9180, #9190), (#9200, #9210), (#9220, #9230)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 3), (2, 2), (0., 0.5, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.73727733681013, 0.73727733681013), (1., 1.), (0.73727733681013, 0.73727733681013), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#9250 = ADVANCED_FACE ('', (#9130), #9240, .T.);
#9260 = CARTESIAN_POINT ('', (20.414725274437, 18.9312139727142, 20.24));
#9270 = VERTEX_POINT ('', #9260);
#9280 = CARTESIAN_POINT ('', (19.43237238217, 7.7028690343278, 20.24));
#9290 = CARTESIAN_POINT ('', (20.414725274437, 18.9312139727142, 20.24));
#9300 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9280, #9290), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9310 = EDGE_CURVE ('', #8910, #9270, #9300, .T.);
#9320 = ORIENTED_EDGE ('', *, *, #9310, .T.);
#9330 = CARTESIAN_POINT ('', (20.996955758473, 18.8802754058019, 25.));
#9340 = VERTEX_POINT ('', #9330);
#9350 = CARTESIAN_POINT ('', (20.996955758473, 18.8802754058019, 25.));
#9360 = CARTESIAN_POINT ('', (20.414725274437, 18.9312139727142, 20.24));
#9370 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9350, #9360), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9380 = EDGE_CURVE ('', #9340, #9270, #9370, .T.);
#9390 = ORIENTED_EDGE ('', *, *, #9380, .F.);
#9400 = CARTESIAN_POINT ('', (20.996955758473, 18.8802754058019, 25.));
#9410 = CARTESIAN_POINT ('', (20.014602866206, 7.6519304674154, 25.));
#9420 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9400, #9410), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9430 = EDGE_CURVE ('', #9340, #8990, #9420, .T.);
#9440 = ORIENTED_EDGE ('', *, *, #9430, .T.);
#9450 = ORIENTED_EDGE ('', *, *, #9030, .T.);
#9460 = EDGE_LOOP ('', (#9320, #9390, #9440, #9450));
#9470 = FACE_OUTER_BOUND ('', #9460, .T.);
#9480 = CARTESIAN_POINT ('', (19.4132395259425, 7.65251688677265, 20.1205096422048));
#9490 = CARTESIAN_POINT ('', (20.0247014926915, 7.59902089650485, 25.1194903577951));
#9500 = CARTESIAN_POINT ('', (20.4046266479519, 18.9841235436247, 20.1205096422048));
#9510 = CARTESIAN_POINT ('', (21.0160886147009, 18.9306275533569, 25.1194903577951));
#9520 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#9480, #9490), (#9500, #9510)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.0518280807273186, 11.323063472659), (-4.91613447871038, 0.120387709526206), .UNSPECIFIED.);
#9530 = ADVANCED_FACE ('', (#9470), #9520, .T.);
#9540 = CARTESIAN_POINT ('', (20.181213972714, 19.1647252744374, 20.24));
#9550 = VERTEX_POINT ('', #9540);
#9560 = CARTESIAN_POINT ('', (20.4147252744374, 18.9312139727142, 20.24));
#9570 = CARTESIAN_POINT ('', (20.4234853428271, 19.0313420125838, 20.24));
#9580 = CARTESIAN_POINT ('', (20.3524136777054, 19.1024136777055, 20.24));
#9590 = CARTESIAN_POINT ('', (20.2813420125837, 19.1734853428271, 20.24));
#9600 = CARTESIAN_POINT ('', (20.181213972714, 19.1647252744374, 20.24));
#9610 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#9560, #9570, #9580, #9590, #9600), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (179.999999999983, 230.00000000002, 280.000000000057), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.906307787036513, 1., 0.906307787036513, 1.))
   REPRESENTATION_ITEM ('')
);
#9620 = EDGE_CURVE ('', #9270, #9550, #9610, .T.);
#9630 = ORIENTED_EDGE ('', *, *, #9620, .T.);
#9640 = CARTESIAN_POINT ('', (20.130275405802, 19.7469557584734, 25.));
#9650 = VERTEX_POINT ('', #9640);
#9660 = CARTESIAN_POINT ('', (20.130275405802, 19.7469557584734, 25.));
#9670 = CARTESIAN_POINT ('', (20.181213972714, 19.1647252744374, 20.24));
#9680 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9660, #9670), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9690 = EDGE_CURVE ('', #9650, #9550, #9680, .T.);
#9700 = ORIENTED_EDGE ('', *, *, #9690, .F.);
#9710 = CARTESIAN_POINT ('', (20.130275405802, 19.7469557584734, 25.));
#9720 = CARTESIAN_POINT ('', (20.5019019791888, 19.7794688707097, 25.));
#9730 = CARTESIAN_POINT ('', (20.7656854249493, 19.5156854249492, 25.));
#9740 = CARTESIAN_POINT ('', (21.0294688707097, 19.2519019791887, 25.));
#9750 = CARTESIAN_POINT ('', (20.9969557584734, 18.8802754058019, 25.));
#9760 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#9710, #9720, #9730, #9740, #9750), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (80.0000000000096, 130.000000000005, 180.000000000001), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.906307787036667, 1., 0.906307787036667, 1.))
   REPRESENTATION_ITEM ('')
);
#9770 = EDGE_CURVE ('', #9650, #9340, #9760, .T.);
#9780 = ORIENTED_EDGE ('', *, *, #9770, .T.);
#9790 = ORIENTED_EDGE ('', *, *, #9380, .T.);
#9800 = EDGE_LOOP ('', (#9630, #9700, #9780, #9790));
#9810 = FACE_OUTER_BOUND ('', #9800, .T.);
#9820 = CARTESIAN_POINT ('', (20.4146029571088, 18.9312246740938, 20.239));
#9830 = CARTESIAN_POINT ('', (20.997078075802, 18.8802647044224, 25.001));
#9840 = CARTESIAN_POINT ('', (20.4333782830149, 19.1458276312026, 20.239));
#9850 = CARTESIAN_POINT ('', (21.0668133713796, 19.6773427802244, 25.001));
#9860 = CARTESIAN_POINT ('', (20.2187753259061, 19.1646029571087, 20.239));
#9870 = CARTESIAN_POINT ('', (20.2697352955776, 19.747078075802, 25.001));
#9880 = CARTESIAN_POINT ('', (20.0041723687973, 19.1833782830149, 20.239));
#9890 = CARTESIAN_POINT ('', (19.4726572197756, 19.8168133713796, 25.001));
#9900 = CARTESIAN_POINT ('', (19.9853970428912, 18.9687753259061, 20.239));
#9910 = CARTESIAN_POINT ('', (19.402921924198, 19.0197352955776, 25.001));
#9920 = CARTESIAN_POINT ('', (19.9666217169851, 18.7541723687973, 20.239));
#9930 = CARTESIAN_POINT ('', (19.3331866286204, 18.2226572197756, 25.001));
#9940 = CARTESIAN_POINT ('', (20.1812246740939, 18.7353970428912, 20.239));
#9950 = CARTESIAN_POINT ('', (20.1302647044224, 18.152921924198, 25.001));
#9960 = CARTESIAN_POINT ('', (20.3958276312027, 18.7166217169851, 20.239));
#9970 = CARTESIAN_POINT ('', (20.9273427802244, 18.0831866286204, 25.001));
#9980 = CARTESIAN_POINT ('', (20.4146029571088, 18.9312246740938, 20.239));
#9990 = CARTESIAN_POINT ('', (20.997078075802, 18.8802647044224, 25.001));
#10000 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#9820, #9830), (#9840, #9850), (#9860, #9870), (#9880, #9890), (#9900, #9910), (#9920, #9930), (#9940, #9950), (#9960, #9970), (#9980, #9990)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#10010 = ADVANCED_FACE ('', (#9810), #10000, .T.);
#10020 = CARTESIAN_POINT ('', (8.95286903432799, 18.1823723821699, 20.24));
#10030 = VERTEX_POINT ('', #10020);
#10040 = CARTESIAN_POINT ('', (20.181213972714, 19.1647252744374, 20.24));
#10050 = CARTESIAN_POINT ('', (8.95286903432799, 18.1823723821699, 20.24));
#10060 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10040, #10050), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10070 = EDGE_CURVE ('', #9550, #10030, #10060, .T.);
#10080 = ORIENTED_EDGE ('', *, *, #10070, .T.);
#10090 = CARTESIAN_POINT ('', (8.90193046741501, 18.7646028662059, 25.));
#10100 = VERTEX_POINT ('', #10090);
#10110 = CARTESIAN_POINT ('', (8.90193046741501, 18.7646028662059, 25.));
#10120 = CARTESIAN_POINT ('', (8.95286903432799, 18.1823723821699, 20.24));
#10130 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10110, #10120), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10140 = EDGE_CURVE ('', #10100, #10030, #10130, .T.);
#10150 = ORIENTED_EDGE ('', *, *, #10140, .F.);
#10160 = CARTESIAN_POINT ('', (8.90193046741501, 18.7646028662059, 25.));
#10170 = CARTESIAN_POINT ('', (20.130275405802, 19.7469557584734, 25.));
#10180 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10160, #10170), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10190 = EDGE_CURVE ('', #10100, #9650, #10180, .T.);
#10200 = ORIENTED_EDGE ('', *, *, #10190, .T.);
#10210 = ORIENTED_EDGE ('', *, *, #9690, .T.);
#10220 = EDGE_LOOP ('', (#10080, #10150, #10200, #10210));
#10230 = FACE_OUTER_BOUND ('', #10220, .T.);
#10240 = CARTESIAN_POINT ('', (20.2341235436246, 19.1546266479519, 20.1205096422048));
#10250 = CARTESIAN_POINT ('', (20.1806275533568, 19.7660886147008, 25.1194903577952));
#10260 = CARTESIAN_POINT ('', (8.90251688677225, 18.1632395259424, 20.1205096422048));
#10270 = CARTESIAN_POINT ('', (8.84902089650444, 18.7747014926913, 25.1194903577952));
#10280 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#10240, #10250), (#10260, #10270)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.0518280807269775, 11.3230634726596), (-4.91613447871038, 0.12038770952627), .UNSPECIFIED.);
#10290 = ADVANCED_FACE ('', (#10230), #10280, .T.);
#10300 = CARTESIAN_POINT ('', (8.75692978717601, 17.9864331350182, 20.24));
#10310 = VERTEX_POINT ('', #10300);
#10320 = CARTESIAN_POINT ('', (8.95286903432799, 18.1823723821699, 20.24));
#10330 = CARTESIAN_POINT ('', (8.77269313574328, 18.1666090336029, 20.24));
#10340 = CARTESIAN_POINT ('', (8.75692978717663, 17.9864331350181, 20.24));
#10350 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#10320, #10330, #10340), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (180.000000000068, 260.000000000036), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.766044443119159, 1.))
   REPRESENTATION_ITEM ('')
);
#10360 = EDGE_CURVE ('', #10030, #10310, #10350, .T.);
#10370 = ORIENTED_EDGE ('', *, *, #10360, .T.);
#10380 = CARTESIAN_POINT ('', (8.17469930313999, 18.0373717019306, 25.));
#10390 = VERTEX_POINT ('', #10380);
#10400 = CARTESIAN_POINT ('', (8.17469930313999, 18.0373717019306, 25.));
#10410 = CARTESIAN_POINT ('', (8.75692978717601, 17.9864331350182, 20.24));
#10420 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10400, #10410), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10430 = EDGE_CURVE ('', #10390, #10310, #10420, .T.);
#10440 = ORIENTED_EDGE ('', *, *, #10430, .F.);
#10450 = CARTESIAN_POINT ('', (8.17469930314059, 18.0373717019305, 25.));
#10460 = CARTESIAN_POINT ('', (8.23320518441608, 18.7060969849295, 25.));
#10470 = CARTESIAN_POINT ('', (8.90193046741501, 18.7646028662058, 25.));
#10480 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#10450, #10460, #10470), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (99.9999999999941, 179.999999999939), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.766044443119288, 1.))
   REPRESENTATION_ITEM ('')
);
#10490 = EDGE_CURVE ('', #10390, #10100, #10480, .T.);
#10500 = ORIENTED_EDGE ('', *, *, #10490, .T.);
#10510 = ORIENTED_EDGE ('', *, *, #10140, .T.);
#10520 = EDGE_LOOP ('', (#10370, #10440, #10500, #10510));
#10530 = FACE_OUTER_BOUND ('', #10520, .T.);
#10540 = CARTESIAN_POINT ('', (9.11012610758104, 18.1326704742341, 20.239));
#10550 = CARTESIAN_POINT ('', (9.48596407375749, 18.5805767206584, 25.001));
#10560 = CARTESIAN_POINT ('', (8.95891005241436, 18.2595558103525, 20.239));
#10570 = CARTESIAN_POINT ('', (8.92431756195506, 19.0518541015636, 25.001));
#10580 = CARTESIAN_POINT ('', (8.81932820570418, 18.1199739636422, 20.239));
#10590 = CARTESIAN_POINT ('', (8.40588281486899, 18.5334193544772, 25.001));
#10600 = CARTESIAN_POINT ('', (8.67974635899404, 17.980392116932, 20.239));
#10610 = CARTESIAN_POINT ('', (7.88744806778294, 18.0149846073909, 25.001));
#10620 = CARTESIAN_POINT ('', (8.80663169511251, 17.8291760617654, 20.239));
#10630 = CARTESIAN_POINT ('', (8.3587254486884, 17.4533380955887, 25.001));
#10640 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#10540, #10550), (#10560, #10570), (#10580, #10590), (#10600, #10610), (#10620, #10630)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 3), (2, 2), (0., 0.5, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.737277336810122, 0.737277336810122), (1., 1.), (0.737277336810122, 0.737277336810122), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#10650 = ADVANCED_FACE ('', (#10530), #10640, .T.);
#10660 = CARTESIAN_POINT ('', (7.77457689490899, 6.7580881966318, 20.24));
#10670 = VERTEX_POINT ('', #10660);
#10680 = CARTESIAN_POINT ('', (8.75692978717601, 17.9864331350182, 20.24));
#10690 = CARTESIAN_POINT ('', (7.77457689490899, 6.7580881966318, 20.24));
#10700 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10680, #10690), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10710 = EDGE_CURVE ('', #10310, #10670, #10700, .T.);
#10720 = ORIENTED_EDGE ('', *, *, #10710, .T.);
#10730 = CARTESIAN_POINT ('', (7.192346410873, 6.8090267635441, 25.));
#10740 = VERTEX_POINT ('', #10730);
#10750 = CARTESIAN_POINT ('', (7.192346410873, 6.8090267635441, 25.));
#10760 = CARTESIAN_POINT ('', (7.77457689490899, 6.7580881966318, 20.24));
#10770 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10750, #10760), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10780 = EDGE_CURVE ('', #10740, #10670, #10770, .T.);
#10790 = ORIENTED_EDGE ('', *, *, #10780, .F.);
#10800 = CARTESIAN_POINT ('', (7.192346410873, 6.8090267635441, 25.));
#10810 = CARTESIAN_POINT ('', (8.17469930313999, 18.0373717019306, 25.));
#10820 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10800, #10810), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10830 = EDGE_CURVE ('', #10740, #10390, #10820, .T.);
#10840 = ORIENTED_EDGE ('', *, *, #10830, .T.);
#10850 = ORIENTED_EDGE ('', *, *, #10430, .T.);
#10860 = EDGE_LOOP ('', (#10720, #10790, #10840, #10850));
#10870 = FACE_OUTER_BOUND ('', #10860, .T.);
#10880 = CARTESIAN_POINT ('', (8.77606264340341, 18.0367852825734, 20.1205096422048));
#10890 = CARTESIAN_POINT ('', (8.16460067665452, 18.0902812728412, 25.1194903577951));
#10900 = CARTESIAN_POINT ('', (7.78467552139398, 6.70517862572128, 20.1205096422048));
#10910 = CARTESIAN_POINT ('', (7.17321355464509, 6.75867461598908, 25.1194903577951));
#10920 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#10880, #10890), (#10900, #10910)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.0518280807273328, 11.323063472659), (-4.91613447871038, 0.120387709526199), .UNSPECIFIED.);
#10930 = ADVANCED_FACE ('', (#10870), #10920, .T.);
#10940 = CARTESIAN_POINT ('', (7.77457689490862, 6.75808819663183, 20.24));
#10950 = CARTESIAN_POINT ('', (7.76581682651891, 6.65796015676216, 20.24));
#10960 = CARTESIAN_POINT ('', (7.83688849164062, 6.58688849164051, 20.24));
#10970 = CARTESIAN_POINT ('', (7.90796015676233, 6.51581682651887, 20.24));
#10980 = CARTESIAN_POINT ('', (8.008088196632, 6.52457689490865, 20.24));
#10990 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#10940, #10950, #10960, #10970, #10980), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (179.999999999982, 230.000000000023, 280.000000000065), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.906307787036498, 1., 0.906307787036498, 1.))
   REPRESENTATION_ITEM ('')
);
#11000 = EDGE_CURVE ('', #10670, #8550, #10990, .T.);
#11010 = ORIENTED_EDGE ('', *, *, #11000, .T.);
#11020 = ORIENTED_EDGE ('', *, *, #8800, .F.);
#11030 = CARTESIAN_POINT ('', (8.05902676354398, 5.9423464108726, 25.));
#11040 = CARTESIAN_POINT ('', (7.68740019015715, 5.90983329863631, 25.));
#11050 = CARTESIAN_POINT ('', (7.4236167443967, 6.1736167443968, 25.));
#11060 = CARTESIAN_POINT ('', (7.15983329863627, 6.43740019015727, 25.));
#11070 = CARTESIAN_POINT ('', (7.1923464108726, 6.80902676354413, 25.));
#11080 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#11030, #11040, #11050, #11060, #11070), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (80.0000000000076, 130.000000000004, 180.000000000001), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.906307787036663, 1., 0.906307787036663, 1.))
   REPRESENTATION_ITEM ('')
);
#11090 = EDGE_CURVE ('', #8710, #10740, #11080, .T.);
#11100 = ORIENTED_EDGE ('', *, *, #11090, .T.);
#11110 = ORIENTED_EDGE ('', *, *, #10780, .T.);
#11120 = EDGE_LOOP ('', (#11010, #11020, #11100, #11110));
#11130 = FACE_OUTER_BOUND ('', #11120, .T.);
#11140 = CARTESIAN_POINT ('', (7.77469921223721, 6.75807749525216, 20.239));
#11150 = CARTESIAN_POINT ('', (7.19222409354401, 6.80903746492364, 25.001));
#11160 = CARTESIAN_POINT ('', (7.75592388633109, 6.54347453814338, 20.239));
#11170 = CARTESIAN_POINT ('', (7.12248879796638, 6.01195938912166, 25.001));
#11180 = CARTESIAN_POINT ('', (7.97052684343987, 6.52469921223724, 20.239));
#11190 = CARTESIAN_POINT ('', (7.91956687376836, 5.94222409354402, 25.001));
#11200 = CARTESIAN_POINT ('', (8.18512980054865, 6.50592388633111, 20.239));
#11210 = CARTESIAN_POINT ('', (8.71664494957034, 5.87248879796638, 25.001));
#11220 = CARTESIAN_POINT ('', (8.20390512645477, 6.72052684343989, 20.239));
#11230 = CARTESIAN_POINT ('', (8.78638024514797, 6.66956687376836, 25.001));
#11240 = CARTESIAN_POINT ('', (8.22268045236089, 6.93512980054867, 20.239));
#11250 = CARTESIAN_POINT ('', (8.8561155407256, 7.46664494957034, 25.001));
#11260 = CARTESIAN_POINT ('', (8.00807749525211, 6.95390512645481, 20.239));
#11270 = CARTESIAN_POINT ('', (8.05903746492362, 7.53638024514798, 25.001));
#11280 = CARTESIAN_POINT ('', (7.79347453814333, 6.97268045236094, 20.239));
#11290 = CARTESIAN_POINT ('', (7.26195938912164, 7.60611554072562, 25.001));
#11300 = CARTESIAN_POINT ('', (7.77469921223721, 6.75807749525216, 20.239));
#11310 = CARTESIAN_POINT ('', (7.19222409354401, 6.80903746492364, 25.001));
#11320 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#11140, #11150), (#11160, #11170), (#11180, #11190), (#11200, #11210), (#11220, #11230), (#11240, #11250), (#11260, #11270), (#11280, #11290), (#11300, #11310)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#11330 = ADVANCED_FACE ('', (#11130), #11320, .T.);
#11340 = ORIENTED_EDGE ('', *, *, #11090, .F.);
#11350 = ORIENTED_EDGE ('', *, *, #8750, .F.);
#11360 = ORIENTED_EDGE ('', *, *, #9090, .F.);
#11370 = ORIENTED_EDGE ('', *, *, #9430, .F.);
#11380 = ORIENTED_EDGE ('', *, *, #9770, .F.);
#11390 = ORIENTED_EDGE ('', *, *, #10190, .F.);
#11400 = ORIENTED_EDGE ('', *, *, #10490, .F.);
#11410 = ORIENTED_EDGE ('', *, *, #10830, .F.);
#11420 = EDGE_LOOP ('', (#11340, #11350, #11360, #11370, #11380, #11390, #11400, #11410));
#11430 = FACE_OUTER_BOUND ('', #11420, .T.);
#11440 = ORIENTED_EDGE ('', *, *, #8300, .T.);
#11450 = ORIENTED_EDGE ('', *, *, #8220, .T.);
#11460 = EDGE_LOOP ('', (#11440, #11450));
#11470 = FACE_BOUND ('', #11460, .T.);
#11480 = CARTESIAN_POINT ('', (20.9250982138419, 20.9848609898848, 25.));
#11490 = CARTESIAN_POINT ('', (22.2348609898849, 6.0142039555041, 25.));
#11500 = CARTESIAN_POINT ('', (5.95444117946113, 19.6750982138419, 25.));
#11510 = CARTESIAN_POINT ('', (7.26420395550406, 4.70444117946115, 25.));
#11520 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#11480, #11490), (#11500, #11510)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-7.51392125608467, 7.51392125608464), (-7.51392125608461, 7.51392125608464), .UNSPECIFIED.);
#11530 = ADVANCED_FACE ('', (#11430, #11470), #11520, .T.);
#11540 = ORIENTED_EDGE ('', *, *, #8610, .F.);
#11550 = ORIENTED_EDGE ('', *, *, #11000, .F.);
#11560 = ORIENTED_EDGE ('', *, *, #10710, .F.);
#11570 = ORIENTED_EDGE ('', *, *, #10360, .F.);
#11580 = ORIENTED_EDGE ('', *, *, #10070, .F.);
#11590 = ORIENTED_EDGE ('', *, *, #9620, .F.);
#11600 = ORIENTED_EDGE ('', *, *, #9310, .F.);
#11610 = ORIENTED_EDGE ('', *, *, #8960, .F.);
#11620 = EDGE_LOOP ('', (#11540, #11550, #11560, #11570, #11580, #11590, #11600, #11610));
#11630 = FACE_OUTER_BOUND ('', #11620, .T.);
#11640 = ORIENTED_EDGE ('', *, *, #5660, .T.);
#11650 = ORIENTED_EDGE ('', *, *, #5580, .T.);
#11660 = EDGE_LOOP ('', (#11640, #11650));
#11670 = FACE_BOUND ('', #11660, .T.);
#11680 = CARTESIAN_POINT ('', (6.66565264265671, 19.0783209373854, 20.24));
#11690 = CARTESIAN_POINT ('', (7.86098123196058, 5.41565264265669, 20.24));
#11700 = CARTESIAN_POINT ('', (20.3283209373854, 20.2736495266893, 20.24));
#11710 = CARTESIAN_POINT ('', (21.5236495266893, 6.61098123196052, 20.24));
#11720 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#11680, #11690), (#11700, #11710)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-6.85742873401159, 6.85742873401159), (-6.85742873401162, 6.85742873401164), .UNSPECIFIED.);
#11730 = ADVANCED_FACE ('', (#11630, #11670), #11720, .T.);
#11740 = CLOSED_SHELL ('', (#5890, #6210, #6790, #8020, #8530, #8890, #9250, #9530, #10010, #10290, #10650, #10930, #11330, #11530, #11730));
#11750 = MANIFOLD_SOLID_BREP ('CUT', #11740);
#11760 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#11770 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#11780 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#11790 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #11760, 'DISTANCE_ACCURACY_VALUE', '');
#11800 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#11790))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#11760, #11770, #11780))
   REPRESENTATION_CONTEXT ('', '3D')
);
#11810 = COLOUR_RGB ('', 1., 0.74901960784314, 0.);
#11820 = FILL_AREA_STYLE_COLOUR ('', #11810);
#11830 = FILL_AREA_STYLE ('', (#11820));
#11840 = SURFACE_STYLE_FILL_AREA (#11830);
#11850 = SURFACE_SIDE_STYLE ('', (#11840));
#11860 = SURFACE_STYLE_USAGE (.POSITIVE., #11850);
#11870 = PRESENTATION_STYLE_ASSIGNMENT ((#11860));
#11880 = STYLED_ITEM ('', (#11870), #11750);
#11890 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#11750), #11800);
#11900 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#11910 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #11900);
#11920 = MECHANICAL_CONTEXT ('', #11900, 'mechanical');
#11930 = PRODUCT ('NONE', '', '', (#11920));
#11940 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#11950 = PERSON ('', '', $, $, $, $);
#11960 = ORGANIZATION ($, '', '');
#11970 = PERSON_AND_ORGANIZATION (#11950, #11960);
#11980 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#11970, #11940, (#11930));
#11990 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#11930));
#12000 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #11930, .NOT_KNOWN.);
#12010 = APPROVAL_STATUS ('approved');
#12020 = APPROVAL (#12010, '');
#12030 = CALENDAR_DATE (2018, 29, 6);
#12040 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#12050 = LOCAL_TIME (8, 54, 5., #12040);
#12060 = DATE_AND_TIME (#12030, #12050);
#12070 = APPROVAL_DATE_TIME (#12060, #12020);
#12080 = APPROVAL_ROLE ('');
#12090 = PERSON ('', '', $, $, $, $);
#12100 = ORGANIZATION ($, '', '');
#12110 = PERSON_AND_ORGANIZATION (#12090, #12100);
#12120 = APPROVAL_PERSON_ORGANIZATION (#12110, #12020, #12080);
#12130 = CC_DESIGN_APPROVAL (#12020, (#12000));
#12140 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#12150 = PERSON ('', '', $, $, $, $);
#12160 = ORGANIZATION ($, '', '');
#12170 = PERSON_AND_ORGANIZATION (#12150, #12160);
#12180 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#12170, #12140, (#12000));
#12190 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#12200 = PERSON ('', '', $, $, $, $);
#12210 = ORGANIZATION ($, '', '');
#12220 = PERSON_AND_ORGANIZATION (#12200, #12210);
#12230 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#12220, #12190, (#12000));
#12240 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#12250 = SECURITY_CLASSIFICATION ('', '', #12240);
#12260 = APPROVAL_STATUS ('approved');
#12270 = APPROVAL (#12260, '');
#12280 = CALENDAR_DATE (2018, 29, 6);
#12290 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#12300 = LOCAL_TIME (8, 54, 5., #12290);
#12310 = DATE_AND_TIME (#12280, #12300);
#12320 = APPROVAL_DATE_TIME (#12310, #12270);
#12330 = APPROVAL_ROLE ('');
#12340 = PERSON ('', '', $, $, $, $);
#12350 = ORGANIZATION ($, '', '');
#12360 = PERSON_AND_ORGANIZATION (#12340, #12350);
#12370 = APPROVAL_PERSON_ORGANIZATION (#12360, #12270, #12330);
#12380 = CC_DESIGN_APPROVAL (#12270, (#12250));
#12390 = DATE_TIME_ROLE ('classification_date');
#12400 = CALENDAR_DATE (2018, 29, 6);
#12410 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#12420 = LOCAL_TIME (8, 54, 5., #12410);
#12430 = DATE_AND_TIME (#12400, #12420);
#12440 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#12430, #12390, (#12250));
#12450 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#12460 = PERSON ('', '', $, $, $, $);
#12470 = ORGANIZATION ($, '', '');
#12480 = PERSON_AND_ORGANIZATION (#12460, #12470);
#12490 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#12480, #12450, (#12250));
#12500 = CC_DESIGN_SECURITY_CLASSIFICATION (#12250, (#12000));
#12510 = DESIGN_CONTEXT ('', #11900, 'design');
#12520 = PRODUCT_DEFINITION ('', '', #12000, #12510);
#12530 = APPROVAL_STATUS ('approved');
#12540 = APPROVAL (#12530, '');
#12550 = CALENDAR_DATE (2018, 29, 6);
#12560 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#12570 = LOCAL_TIME (8, 54, 5., #12560);
#12580 = DATE_AND_TIME (#12550, #12570);
#12590 = APPROVAL_DATE_TIME (#12580, #12540);
#12600 = APPROVAL_ROLE ('');
#12610 = PERSON ('', '', $, $, $, $);
#12620 = ORGANIZATION ($, '', '');
#12630 = PERSON_AND_ORGANIZATION (#12610, #12620);
#12640 = APPROVAL_PERSON_ORGANIZATION (#12630, #12540, #12600);
#12650 = CC_DESIGN_APPROVAL (#12540, (#12520));
#12660 = DATE_TIME_ROLE ('creation_date');
#12670 = CALENDAR_DATE (2018, 29, 6);
#12680 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#12690 = LOCAL_TIME (8, 54, 5., #12680);
#12700 = DATE_AND_TIME (#12670, #12690);
#12710 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#12700, #12660, (#12520));
#12720 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#12730 = PERSON ('', '', $, $, $, $);
#12740 = ORGANIZATION ($, '', '');
#12750 = PERSON_AND_ORGANIZATION (#12730, #12740);
#12760 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#12750, #12720, (#12520));
#12770 = PRODUCT_DEFINITION_SHAPE ('', '', #12520);
#12780 = SHAPE_DEFINITION_REPRESENTATION (#12770, #11890);
ENDSEC;
END-ISO-10303-21;