ISO-10303-21;
HEADER;
FILE_DESCRIPTION ((), '1');
FILE_NAME ('C:\\TDMTemp\\Tools\\SMLIB\\inserts\\W\\step\\WCGT 06T302FN-ALU AK10.stp', '2011-04-28T11:01:48', ('Unknown'), ('Unknown'), 'HarmonyWare STEP v1.4.6', 'HarmonyWare Translators', '');
FILE_SCHEMA (('CONFIG_CONTROL_DESIGN'));
ENDSEC;

DATA;
#10 = CARTESIAN_POINT ('', (0.580925898037422, 0.487454706784531, -3.97));
#20 = VERTEX_POINT ('', #10);
#30 = CARTESIAN_POINT ('', (6.42953231367454, 0.487454706784531, -3.97));
#40 = VERTEX_POINT ('', #30);
#50 = CARTESIAN_POINT ('', (0.580925898037422, 0.487454706784531, -3.97));
#60 = CARTESIAN_POINT ('', (6.42953231367455, 0.487454706784531, -3.97));
#70 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#50, #60), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#80 = EDGE_CURVE ('', #20, #40, #70, .T.);
#90 = ORIENTED_EDGE ('', *, *, #80, .F.);
#100 = CARTESIAN_POINT ('', (1.59652574400393, 6.24720764922091, -3.97));
#110 = VERTEX_POINT ('', #100);
#120 = CARTESIAN_POINT ('', (1.59652574400393, 6.24720764922091, -3.97));
#130 = CARTESIAN_POINT ('', (0.580925898037422, 0.487454706784531, -3.97));
#140 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#120, #130), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#150 = EDGE_CURVE ('', #110, #20, #140, .T.);
#160 = ORIENTED_EDGE ('', *, *, #150, .F.);
#170 = CARTESIAN_POINT ('', (4.52082895182249, 11.3122493818993, -3.97));
#180 = VERTEX_POINT ('', #170);
#190 = CARTESIAN_POINT ('', (4.52082895182249, 11.3122493818993, -3.97));
#200 = CARTESIAN_POINT ('', (1.59652574400393, 6.24720764922091, -3.97));
#210 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#190, #200), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#220 = EDGE_CURVE ('', #180, #110, #210, .T.);
#230 = ORIENTED_EDGE ('', *, *, #220, .F.);
#240 = CARTESIAN_POINT ('', (9.00112139651131, 7.55283764399456, -3.97));
#250 = VERTEX_POINT ('', #240);
#260 = CARTESIAN_POINT ('', (9.00112139651131, 7.55283764399456, -3.97));
#270 = CARTESIAN_POINT ('', (4.52082895182249, 11.3122493818993, -3.97));
#280 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#260, #270), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#290 = EDGE_CURVE ('', #250, #180, #280, .T.);
#300 = ORIENTED_EDGE ('', *, *, #290, .F.);
#310 = CARTESIAN_POINT ('', (11.9254246043299, 2.48779591131616, -3.97));
#320 = VERTEX_POINT ('', #310);
#330 = CARTESIAN_POINT ('', (11.9254246043299, 2.48779591131616, -3.97));
#340 = CARTESIAN_POINT ('', (9.00112139651131, 7.55283764399457, -3.97));
#350 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#330, #340), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#360 = EDGE_CURVE ('', #320, #250, #350, .T.);
#370 = ORIENTED_EDGE ('', *, *, #360, .F.);
#380 = CARTESIAN_POINT ('', (6.42953231367454, 0.487454706784531, -3.97));
#390 = CARTESIAN_POINT ('', (11.9254246043299, 2.48779591131616, -3.97));
#400 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#380, #390), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#410 = EDGE_CURVE ('', #40, #320, #400, .T.);
#420 = ORIENTED_EDGE ('', *, *, #410, .F.);
#430 = EDGE_LOOP ('', (#90, #160, #230, #300, #370, #420));
#440 = FACE_OUTER_BOUND ('', #430, .T.);
#450 = CARTESIAN_POINT ('', (11.9254246043299, 0.487454706784531, -3.97));
#460 = CARTESIAN_POINT ('', (11.9254246043299, 11.3122493818993, -3.97));
#470 = CARTESIAN_POINT ('', (0.580925898037423, 0.487454706784531, -3.97));
#480 = CARTESIAN_POINT ('', (0.580925898037423, 11.3122493818993, -3.97));
#490 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#450, #460), (#470, #480)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.171143465886143, 0.828856534113857), (0.186208747383622, 0.813791252616378), .UNSPECIFIED.);
#500 = ADVANCED_FACE ('', (#440), #490, .T.);
#510 = ORIENTED_EDGE ('', *, *, #150, .T.);
#520 = CARTESIAN_POINT ('', (0.0413891679164004, 0.234729635533386, 0.));
#530 = VERTEX_POINT ('', #520);
#540 = CARTESIAN_POINT ('', (0.580925898037422, 0.487454706784531, -3.97));
#550 = CARTESIAN_POINT ('', (0.0413891679164005, 0.234729635533387, 0.));
#560 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#540, #550), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#570 = EDGE_CURVE ('', #20, #530, #560, .T.);
#580 = ORIENTED_EDGE ('', *, *, #570, .T.);
#590 = CARTESIAN_POINT ('', (1.1314018763945, 6.41649889227752, 0.));
#600 = VERTEX_POINT ('', #590);
#610 = CARTESIAN_POINT ('', (1.1314018763945, 6.41649889227752, 0.));
#620 = CARTESIAN_POINT ('', (0.0413891679164005, 0.234729635533387, 0.));
#630 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#610, #620), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#640 = EDGE_CURVE ('', #600, #530, #630, .T.);
#650 = ORIENTED_EDGE ('', *, *, #640, .F.);
#660 = CARTESIAN_POINT ('', (1.59652574400393, 6.24720764922091, -3.97));
#670 = CARTESIAN_POINT ('', (1.1314018763945, 6.41649889227752, 0.));
#680 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#660, #670), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#690 = EDGE_CURVE ('', #110, #600, #680, .T.);
#700 = ORIENTED_EDGE ('', *, *, #690, .F.);
#710 = EDGE_LOOP ('', (#510, #580, #650, #700));
#720 = FACE_OUTER_BOUND ('', #710, .T.);
#730 = CARTESIAN_POINT ('', (1.59652574400393, 6.24720764922091, -3.97));
#740 = CARTESIAN_POINT ('', (1.1314018763945, 6.41649889227752, 0.));
#750 = CARTESIAN_POINT ('', (0.580925898037422, 0.487454706784531, -3.97));
#760 = CARTESIAN_POINT ('', (0.0413891679164005, 0.234729635533387, 0.));
#770 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#730, #740), (#750, #760)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#780 = ADVANCED_FACE ('', (#720), #770, .T.);
#790 = CARTESIAN_POINT ('', (0.238350718518842, -2.77555756156289E-17, 0.));
#800 = VERTEX_POINT ('', #790);
#810 = CARTESIAN_POINT ('', (0.0413891679164004, 0.234729635533386, 0.));
#820 = CARTESIAN_POINT ('', (0.0251944729022505, 0.142884956125384, 0.));
#830 = CARTESIAN_POINT ('', (0.0851418298950464, 0.0714424780626921, 0.));
#840 = CARTESIAN_POINT ('', (0.145089186887842, -1.51060599019475E-17, 0.));
#850 = CARTESIAN_POINT ('', (0.238350718518842, -2.77555756156289E-17, 0.));
#860 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#810, #820, #830, #840, #850), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 0.5, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.90630778703665, 1., 0.90630778703665, 1.))
   REPRESENTATION_ITEM ('')
);
#870 = EDGE_CURVE ('', #530, #800, #860, .T.);
#880 = ORIENTED_EDGE ('', *, *, #870, .F.);
#890 = ORIENTED_EDGE ('', *, *, #570, .F.);
#900 = CARTESIAN_POINT ('', (0.238350718518842, -2.77555756156289E-17, 0.));
#910 = CARTESIAN_POINT ('', (0.580925898037422, 0.487454706784531, -3.97));
#920 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#900, #910), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#930 = EDGE_CURVE ('', #800, #20, #920, .T.);
#940 = ORIENTED_EDGE ('', *, *, #930, .F.);
#950 = EDGE_LOOP ('', (#880, #890, #940));
#960 = FACE_OUTER_BOUND ('', #950, .T.);
#970 = CARTESIAN_POINT ('', (0.0413891679164004, 0.234729635533386, 0.));
#980 = CARTESIAN_POINT ('', (0.0251944729022505, 0.142884956125384, 0.));
#990 = CARTESIAN_POINT ('', (0.0851418298950464, 0.0714424780626921, 0.));
#1000 = CARTESIAN_POINT ('', (0.145089186887842, -1.51060599019475E-17, 0.));
#1010 = CARTESIAN_POINT ('', (0.238350718518842, -2.77555756156289E-17, 0.));
#1020 = CARTESIAN_POINT ('', (0.580925898037422, 0.487454706784531, -3.97));
#1030 = CARTESIAN_POINT ('', (0.580925898037422, 0.487454706784531, -3.97));
#1040 = CARTESIAN_POINT ('', (0.580925898037422, 0.487454706784531, -3.97));
#1050 = CARTESIAN_POINT ('', (0.580925898037422, 0.487454706784531, -3.97));
#1060 = CARTESIAN_POINT ('', (0.580925898037422, 0.487454706784531, -3.97));
#1070 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#970, #980, #990, #1000, #1010), (#1020, #1030, #1040, #1050, #1060)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 2, 3), (0., 1.), (0., 0.5, 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.90630778703665, 1., 0.90630778703665, 1.), (1., 0.90630778703665, 1., 0.90630778703665, 1.)))
   REPRESENTATION_ITEM ('')
);
#1080 = ADVANCED_FACE ('', (#960), #1070, .T.);
#1090 = ORIENTED_EDGE ('', *, *, #80, .T.);
#1100 = CARTESIAN_POINT ('', (6.51548373035399, 0., 0.));
#1110 = VERTEX_POINT ('', #1100);
#1120 = CARTESIAN_POINT ('', (6.42953231367454, 0.487454706784531, -3.97));
#1130 = CARTESIAN_POINT ('', (6.51548373035399, 0., 0.));
#1140 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1120, #1130), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1150 = EDGE_CURVE ('', #40, #1110, #1140, .T.);
#1160 = ORIENTED_EDGE ('', *, *, #1150, .T.);
#1170 = CARTESIAN_POINT ('', (0.238350718518842, 0., 0.));
#1180 = CARTESIAN_POINT ('', (6.51548373035399, 0., 0.));
#1190 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1170, #1180), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1200 = EDGE_CURVE ('', #800, #1110, #1190, .T.);
#1210 = ORIENTED_EDGE ('', *, *, #1200, .F.);
#1220 = ORIENTED_EDGE ('', *, *, #930, .T.);
#1230 = EDGE_LOOP ('', (#1090, #1160, #1210, #1220));
#1240 = FACE_OUTER_BOUND ('', #1230, .T.);
#1250 = CARTESIAN_POINT ('', (0.580925898037422, 0.487454706784531, -3.97));
#1260 = CARTESIAN_POINT ('', (0.238350718518842, 0., 0.));
#1270 = CARTESIAN_POINT ('', (6.42953231367455, 0.487454706784531, -3.97));
#1280 = CARTESIAN_POINT ('', (6.51548373035399, 0., 0.));
#1290 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1250, #1260), (#1270, #1280)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#1300 = ADVANCED_FACE ('', (#1240), #1290, .T.);
#1310 = ORIENTED_EDGE ('', *, *, #410, .T.);
#1320 = CARTESIAN_POINT ('', (12.4140593012671, 2.14690593238214, 0.));
#1330 = VERTEX_POINT ('', #1320);
#1340 = CARTESIAN_POINT ('', (12.4140593012671, 2.14690593238214, 0.));
#1350 = CARTESIAN_POINT ('', (11.9254246043299, 2.48779591131616, -3.97));
#1360 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#1340, #1350), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#1370 = EDGE_CURVE ('', #1330, #320, #1360, .T.);
#1380 = ORIENTED_EDGE ('', *, *, #1370, .F.);
#1390 = CARTESIAN_POINT ('', (6.51548373035399, 0., 0.));
#1400 = CARTESIAN_POINT ('', (12.4140593012671, 2.14690593238214, 0.));
#1410 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1390, #1400), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1420 = EDGE_CURVE ('', #1110, #1330, #1410, .T.);
#1430 = ORIENTED_EDGE ('', *, *, #1420, .F.);
#1440 = ORIENTED_EDGE ('', *, *, #1150, .F.);
#1450 = EDGE_LOOP ('', (#1310, #1380, #1430, #1440));
#1460 = FACE_OUTER_BOUND ('', #1450, .T.);
#1470 = CARTESIAN_POINT ('', (6.42953231367454, 0.487454706784531, -3.97));
#1480 = CARTESIAN_POINT ('', (6.51548373035399, 0., 0.));
#1490 = CARTESIAN_POINT ('', (11.9254246043299, 2.48779591131616, -3.97));
#1500 = CARTESIAN_POINT ('', (12.4140593012671, 2.14690593238214, 0.));
#1510 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1470, #1480), (#1490, #1500)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#1520 = ADVANCED_FACE ('', (#1460), #1510, .T.);
#1530 = CARTESIAN_POINT ('', (12.5188603533589, 2.43484445653932, 0.));
#1540 = VERTEX_POINT ('', #1530);
#1550 = CARTESIAN_POINT ('', (12.4140593012671, 2.14690593238214, 0.));
#1560 = CARTESIAN_POINT ('', (12.5016964743439, 2.17880325479735, 0.));
#1570 = CARTESIAN_POINT ('', (12.5335937967592, 2.26644042787419, 0.));
#1580 = CARTESIAN_POINT ('', (12.5654911191744, 2.35407760095103, 0.));
#1590 = CARTESIAN_POINT ('', (12.5188603533589, 2.43484445653932, 0.));
#1600 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1550, #1560, #1570, #1580, #1590), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 0.5, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.90630778703665, 1., 0.90630778703665, 1.))
   REPRESENTATION_ITEM ('')
);
#1610 = EDGE_CURVE ('', #1330, #1540, #1600, .T.);
#1620 = ORIENTED_EDGE ('', *, *, #1610, .F.);
#1630 = ORIENTED_EDGE ('', *, *, #1370, .T.);
#1640 = CARTESIAN_POINT ('', (12.5188603533589, 2.43484445653932, 0.));
#1650 = CARTESIAN_POINT ('', (11.9254246043299, 2.48779591131616, -3.97));
#1660 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#1640, #1650), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#1670 = EDGE_CURVE ('', #1540, #320, #1660, .T.);
#1680 = ORIENTED_EDGE ('', *, *, #1670, .F.);
#1690 = EDGE_LOOP ('', (#1620, #1630, #1680));
#1700 = FACE_OUTER_BOUND ('', #1690, .T.);
#1710 = CARTESIAN_POINT ('', (12.4140593012671, 2.14690593238214, 0.));
#1720 = CARTESIAN_POINT ('', (12.5016964743439, 2.17880325479735, 0.));
#1730 = CARTESIAN_POINT ('', (12.5335937967592, 2.26644042787419, 0.));
#1740 = CARTESIAN_POINT ('', (12.5654911191744, 2.35407760095103, 0.));
#1750 = CARTESIAN_POINT ('', (12.5188603533589, 2.43484445653932, 0.));
#1760 = CARTESIAN_POINT ('', (11.9254246043299, 2.48779591131616, -3.97));
#1770 = CARTESIAN_POINT ('', (11.9254246043299, 2.48779591131616, -3.97));
#1780 = CARTESIAN_POINT ('', (11.9254246043299, 2.48779591131616, -3.97));
#1790 = CARTESIAN_POINT ('', (11.9254246043299, 2.48779591131616, -3.97));
#1800 = CARTESIAN_POINT ('', (11.9254246043299, 2.48779591131616, -3.97));
#1810 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#1710, #1720, #1730, #1740, #1750), (#1760, #1770, #1780, #1790, #1800)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 2, 3), (0., 1.), (0., 0.5, 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.90630778703665, 1., 0.90630778703665, 1.), (1., 0.90630778703665, 1., 0.90630778703665, 1.)))
   REPRESENTATION_ITEM ('')
);
#1820 = ADVANCED_FACE ('', (#1700), #1810, .T.);
#1830 = ORIENTED_EDGE ('', *, *, #360, .T.);
#1840 = CARTESIAN_POINT ('', (9.38029384744129, 7.87100110772249, 0.));
#1850 = VERTEX_POINT ('', #1840);
#1860 = CARTESIAN_POINT ('', (9.00112139651131, 7.55283764399456, -3.97));
#1870 = CARTESIAN_POINT ('', (9.38029384744129, 7.87100110772249, 0.));
#1880 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1860, #1870), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1890 = EDGE_CURVE ('', #250, #1850, #1880, .T.);
#1900 = ORIENTED_EDGE ('', *, *, #1890, .T.);
#1910 = CARTESIAN_POINT ('', (12.5188603533589, 2.43484445653932, 0.));
#1920 = CARTESIAN_POINT ('', (9.38029384744129, 7.87100110772249, 0.));
#1930 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1910, #1920), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1940 = EDGE_CURVE ('', #1540, #1850, #1930, .T.);
#1950 = ORIENTED_EDGE ('', *, *, #1940, .F.);
#1960 = ORIENTED_EDGE ('', *, *, #1670, .T.);
#1970 = EDGE_LOOP ('', (#1830, #1900, #1950, #1960));
#1980 = FACE_OUTER_BOUND ('', #1970, .T.);
#1990 = CARTESIAN_POINT ('', (11.9254246043299, 2.48779591131616, -3.97));
#2000 = CARTESIAN_POINT ('', (12.5188603533589, 2.43484445653932, 0.));
#2010 = CARTESIAN_POINT ('', (9.00112139651131, 7.55283764399457, -3.97));
#2020 = CARTESIAN_POINT ('', (9.38029384744129, 7.87100110772249, 0.));
#2030 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1990, #2000), (#2010, #2020)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#2040 = ADVANCED_FACE ('', (#1980), #2030, .T.);
#2050 = ORIENTED_EDGE ('', *, *, #290, .T.);
#2060 = CARTESIAN_POINT ('', (4.57173098500628, 11.9058644320845, 0.));
#2070 = VERTEX_POINT ('', #2060);
#2080 = CARTESIAN_POINT ('', (4.57173098500628, 11.9058644320845, 0.));
#2090 = CARTESIAN_POINT ('', (4.52082895182249, 11.3122493818993, -3.97));
#2100 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#2080, #2090), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#2110 = EDGE_CURVE ('', #2070, #180, #2100, .T.);
#2120 = ORIENTED_EDGE ('', *, *, #2110, .F.);
#2130 = CARTESIAN_POINT ('', (9.38029384744129, 7.87100110772249, 0.));
#2140 = CARTESIAN_POINT ('', (4.57173098500628, 11.9058644320845, 0.));
#2150 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2130, #2140), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2160 = EDGE_CURVE ('', #1850, #2070, #2150, .T.);
#2170 = ORIENTED_EDGE ('', *, *, #2160, .F.);
#2180 = ORIENTED_EDGE ('', *, *, #1890, .F.);
#2190 = EDGE_LOOP ('', (#2050, #2120, #2170, #2180));
#2200 = FACE_OUTER_BOUND ('', #2190, .T.);
#2210 = CARTESIAN_POINT ('', (9.00112139651131, 7.55283764399456, -3.97));
#2220 = CARTESIAN_POINT ('', (9.38029384744129, 7.87100110772249, 0.));
#2230 = CARTESIAN_POINT ('', (4.52082895182249, 11.3122493818993, -3.97));
#2240 = CARTESIAN_POINT ('', (4.57173098500628, 11.9058644320845, 0.));
#2250 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2210, #2220), (#2230, #2240)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#2260 = ADVANCED_FACE ('', (#2200), #2250, .T.);
#2270 = CARTESIAN_POINT ('', (4.26996838231208, 11.8526555434607, 0.));
#2280 = VERTEX_POINT ('', #2270);
#2290 = CARTESIAN_POINT ('', (4.57173098500628, 11.9058644320845, 0.));
#2300 = CARTESIAN_POINT ('', (4.50028850694359, 11.9658117890773, 0.));
#2310 = CARTESIAN_POINT ('', (4.40844382753558, 11.9496170940631, 0.));
#2320 = CARTESIAN_POINT ('', (4.31659914812758, 11.933422399049, 0.));
#2330 = CARTESIAN_POINT ('', (4.26996838231208, 11.8526555434607, 0.));
#2340 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2290, #2300, #2310, #2320, #2330), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 0.5, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.90630778703665, 1., 0.90630778703665, 1.))
   REPRESENTATION_ITEM ('')
);
#2350 = EDGE_CURVE ('', #2070, #2280, #2340, .T.);
#2360 = ORIENTED_EDGE ('', *, *, #2350, .F.);
#2370 = ORIENTED_EDGE ('', *, *, #2110, .T.);
#2380 = CARTESIAN_POINT ('', (4.26996838231208, 11.8526555434607, 0.));
#2390 = CARTESIAN_POINT ('', (4.52082895182249, 11.3122493818993, -3.97));
#2400 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#2380, #2390), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#2410 = EDGE_CURVE ('', #2280, #180, #2400, .T.);
#2420 = ORIENTED_EDGE ('', *, *, #2410, .F.);
#2430 = EDGE_LOOP ('', (#2360, #2370, #2420));
#2440 = FACE_OUTER_BOUND ('', #2430, .T.);
#2450 = CARTESIAN_POINT ('', (4.57173098500628, 11.9058644320845, 0.));
#2460 = CARTESIAN_POINT ('', (4.50028850694359, 11.9658117890773, 0.));
#2470 = CARTESIAN_POINT ('', (4.40844382753558, 11.9496170940631, 0.));
#2480 = CARTESIAN_POINT ('', (4.31659914812758, 11.933422399049, 0.));
#2490 = CARTESIAN_POINT ('', (4.26996838231208, 11.8526555434607, 0.));
#2500 = CARTESIAN_POINT ('', (4.52082895182249, 11.3122493818993, -3.97));
#2510 = CARTESIAN_POINT ('', (4.52082895182249, 11.3122493818993, -3.97));
#2520 = CARTESIAN_POINT ('', (4.52082895182249, 11.3122493818993, -3.97));
#2530 = CARTESIAN_POINT ('', (4.52082895182249, 11.3122493818993, -3.97));
#2540 = CARTESIAN_POINT ('', (4.52082895182249, 11.3122493818993, -3.97));
#2550 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#2450, #2460, #2470, #2480, #2490), (#2500, #2510, #2520, #2530, #2540)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 2, 3), (0., 1.), (0., 0.5, 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.90630778703665, 1., 0.90630778703665, 1.), (1., 0.90630778703665, 1., 0.90630778703665, 1.)))
   REPRESENTATION_ITEM ('')
);
#2560 = ADVANCED_FACE ('', (#2440), #2550, .T.);
#2570 = ORIENTED_EDGE ('', *, *, #220, .T.);
#2580 = ORIENTED_EDGE ('', *, *, #690, .T.);
#2590 = CARTESIAN_POINT ('', (4.26996838231208, 11.8526555434607, 0.));
#2600 = CARTESIAN_POINT ('', (1.1314018763945, 6.41649889227752, 0.));
#2610 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2590, #2600), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2620 = EDGE_CURVE ('', #2280, #600, #2610, .T.);
#2630 = ORIENTED_EDGE ('', *, *, #2620, .F.);
#2640 = ORIENTED_EDGE ('', *, *, #2410, .T.);
#2650 = EDGE_LOOP ('', (#2570, #2580, #2630, #2640));
#2660 = FACE_OUTER_BOUND ('', #2650, .T.);
#2670 = CARTESIAN_POINT ('', (4.52082895182249, 11.3122493818993, -3.97));
#2680 = CARTESIAN_POINT ('', (4.26996838231208, 11.8526555434607, 0.));
#2690 = CARTESIAN_POINT ('', (1.59652574400393, 6.24720764922091, -3.97));
#2700 = CARTESIAN_POINT ('', (1.1314018763945, 6.41649889227752, 0.));
#2710 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2670, #2680), (#2690, #2700)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#2720 = ADVANCED_FACE ('', (#2660), #2710, .T.);
#2730 = ORIENTED_EDGE ('', *, *, #1200, .T.);
#2740 = ORIENTED_EDGE ('', *, *, #1420, .T.);
#2750 = ORIENTED_EDGE ('', *, *, #1610, .T.);
#2760 = ORIENTED_EDGE ('', *, *, #1940, .T.);
#2770 = ORIENTED_EDGE ('', *, *, #2160, .T.);
#2780 = ORIENTED_EDGE ('', *, *, #2350, .T.);
#2790 = ORIENTED_EDGE ('', *, *, #2620, .T.);
#2800 = ORIENTED_EDGE ('', *, *, #640, .T.);
#2810 = ORIENTED_EDGE ('', *, *, #870, .T.);
#2820 = EDGE_LOOP ('', (#2730, #2740, #2750, #2760, #2770, #2780, #2790, #2800, #2810));
#2830 = FACE_OUTER_BOUND ('', #2820, .T.);
#2840 = CARTESIAN_POINT ('', (12.5654911191744, 0., 0.));
#2850 = CARTESIAN_POINT ('', (0.0251944729022497, 0., 0.));
#2860 = CARTESIAN_POINT ('', (12.5654911191744, 11.9658117890773, 0.));
#2870 = CARTESIAN_POINT ('', (0.0251944729022497, 11.9658117890773, 0.));
#2880 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2840, #2850), (#2860, #2870)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.186208747383622, 0.813791252616378), (0.171143465886143, 0.828856534113857), .UNSPECIFIED.);
#2890 = ADVANCED_FACE ('', (#2830), #2880, .T.);
#2900 = CLOSED_SHELL ('', (#500, #780, #1080, #1300, #1520, #1820, #2040, #2260, #2560, #2720, #2890));
#2910 = MANIFOLD_SOLID_BREP ('', #2900);
#2920 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#2930 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#2940 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#2950 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #2920, 'DISTANCE_ACCURACY_VALUE', '');
#2960 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#2950))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#2920, #2930, #2940))
   REPRESENTATION_CONTEXT ('', '3D')
);
#2970 = COLOUR_RGB ('', 1., 0.75, 0.);
#2980 = FILL_AREA_STYLE_COLOUR ('', #2970);
#2990 = FILL_AREA_STYLE ('', (#2980));
#3000 = SURFACE_STYLE_FILL_AREA (#2990);
#3010 = SURFACE_SIDE_STYLE ('', (#3000));
#3020 = SURFACE_STYLE_USAGE (.POSITIVE., #3010);
#3030 = PRESENTATION_STYLE_ASSIGNMENT ((#3020));
#3040 = STYLED_ITEM ('', (#3030), #2910);
#3050 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#2910), #2960);
#3060 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#3070 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #3060);
#3080 = MECHANICAL_CONTEXT ('', #3060, 'mechanical');
#3090 = PRODUCT ('product-name', '', '', (#3080));
#3100 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#3110 = PERSON ('', '', $, $, $, $);
#3120 = ORGANIZATION ($, '', '');
#3130 = PERSON_AND_ORGANIZATION (#3110, #3120);
#3140 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#3130, #3100, (#3090));
#3150 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#3090));
#3160 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #3090, .NOT_KNOWN.);
#3170 = APPROVAL_STATUS ('approved');
#3180 = APPROVAL (#3170, '');
#3190 = CALENDAR_DATE (2011, 28, 4);
#3200 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#3210 = LOCAL_TIME (11, 1, 48., #3200);
#3220 = DATE_AND_TIME (#3190, #3210);
#3230 = APPROVAL_DATE_TIME (#3220, #3180);
#3240 = APPROVAL_ROLE ('');
#3250 = PERSON ('', '', $, $, $, $);
#3260 = ORGANIZATION ($, '', '');
#3270 = PERSON_AND_ORGANIZATION (#3250, #3260);
#3280 = APPROVAL_PERSON_ORGANIZATION (#3270, #3180, #3240);
#3290 = CC_DESIGN_APPROVAL (#3180, (#3160));
#3300 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#3310 = PERSON ('', '', $, $, $, $);
#3320 = ORGANIZATION ($, '', '');
#3330 = PERSON_AND_ORGANIZATION (#3310, #3320);
#3340 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#3330, #3300, (#3160));
#3350 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#3360 = PERSON ('', '', $, $, $, $);
#3370 = ORGANIZATION ($, '', '');
#3380 = PERSON_AND_ORGANIZATION (#3360, #3370);
#3390 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#3380, #3350, (#3160));
#3400 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#3410 = SECURITY_CLASSIFICATION ('', '', #3400);
#3420 = APPROVAL_STATUS ('approved');
#3430 = APPROVAL (#3420, '');
#3440 = CALENDAR_DATE (2011, 28, 4);
#3450 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#3460 = LOCAL_TIME (11, 1, 48., #3450);
#3470 = DATE_AND_TIME (#3440, #3460);
#3480 = APPROVAL_DATE_TIME (#3470, #3430);
#3490 = APPROVAL_ROLE ('');
#3500 = PERSON ('', '', $, $, $, $);
#3510 = ORGANIZATION ($, '', '');
#3520 = PERSON_AND_ORGANIZATION (#3500, #3510);
#3530 = APPROVAL_PERSON_ORGANIZATION (#3520, #3430, #3490);
#3540 = CC_DESIGN_APPROVAL (#3430, (#3410));
#3550 = DATE_TIME_ROLE ('classification_date');
#3560 = CALENDAR_DATE (2011, 28, 4);
#3570 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#3580 = LOCAL_TIME (11, 1, 48., #3570);
#3590 = DATE_AND_TIME (#3560, #3580);
#3600 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#3590, #3550, (#3410));
#3610 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#3620 = PERSON ('', '', $, $, $, $);
#3630 = ORGANIZATION ($, '', '');
#3640 = PERSON_AND_ORGANIZATION (#3620, #3630);
#3650 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#3640, #3610, (#3410));
#3660 = CC_DESIGN_SECURITY_CLASSIFICATION (#3410, (#3160));
#3670 = DESIGN_CONTEXT ('', #3060, 'design');
#3680 = PRODUCT_DEFINITION ('', '', #3160, #3670);
#3690 = APPROVAL_STATUS ('approved');
#3700 = APPROVAL (#3690, '');
#3710 = CALENDAR_DATE (2011, 28, 4);
#3720 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#3730 = LOCAL_TIME (11, 1, 48., #3720);
#3740 = DATE_AND_TIME (#3710, #3730);
#3750 = APPROVAL_DATE_TIME (#3740, #3700);
#3760 = APPROVAL_ROLE ('');
#3770 = PERSON ('', '', $, $, $, $);
#3780 = ORGANIZATION ($, '', '');
#3790 = PERSON_AND_ORGANIZATION (#3770, #3780);
#3800 = APPROVAL_PERSON_ORGANIZATION (#3790, #3700, #3760);
#3810 = CC_DESIGN_APPROVAL (#3700, (#3680));
#3820 = DATE_TIME_ROLE ('creation_date');
#3830 = CALENDAR_DATE (2011, 28, 4);
#3840 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#3850 = LOCAL_TIME (11, 1, 48., #3840);
#3860 = DATE_AND_TIME (#3830, #3850);
#3870 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#3860, #3820, (#3680));
#3880 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#3890 = PERSON ('', '', $, $, $, $);
#3900 = ORGANIZATION ($, '', '');
#3910 = PERSON_AND_ORGANIZATION (#3890, #3900);
#3920 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#3910, #3880, (#3680));
#3930 = PRODUCT_DEFINITION_SHAPE ('', '', #3680);
#3940 = SHAPE_DEFINITION_REPRESENTATION (#3930, #3050);
ENDSEC;
END-ISO-10303-21;