12 Stk. an Lager
Tap VUSP Z-PRO ISO2X M12X1.75
CHF 54.29
Item original number:
3101101088
Item number:
826649
Technical documents:
Delivery time: 1-3 days
Product information "Tap VUSP Z-PRO ISO2X M12X1.75"
| Area of application: | K2 Nodular cast iron 150-350 HB M1 Stainless steel ≤700 N/mm² M2 Stainless steel ≤750 N/mm² N1 Aluminium alloys ≤ 12% Si N2 Aluminium alloys > 12% Si N3 Copper N4 Bronze and brass P1 Steel ≤500 N/mm² P2 Steel 500-700 N/mm² P3 Steel 600-800 N/mm² P4 Steel 800-1000 N/mm² |
|---|---|
|
Area of application (●ideal / ◌appropriate): |
◌ K2 Nodular cast iron 150-350 HB ◌ M2 Stainless steel ≤750 N/mm² ◌ N3 Copper ◌ N4 Bronze and brass ● M1 Stainless steel ≤700 N/mm² ● N1 Aluminium alloys ≤ 12% Si ● N2 Aluminium alloys > 12% Si ● P1 Steel ≤500 N/mm² ● P2 Steel 500-700 N/mm² ● P3 Steel 600-800 N/mm² ● P4 Steel 800-1000 N/mm² |
| Chamfer length: | 2.5 |
| Coating: | Yes |
| Coating / Suface: | Beschichtet |
| Coolant hole: | No |
| Direction of movement: | Right hand type |
| Hole type: | Blind-hole |
| K1 Grey cast iron 150-250 HB: | 10-20 m/min |
|
Length cutting edge (l1): |
15 |
| Length square: | 10 |
|
Length total (L): |
110 |
| M1 Stainless steel < 700 N/mm²: | 5-15 m/min |
| M2 Stainless steel < 750 N/mm²: | 5-10 m/min |
| Manufacturer: | Yamawa |
| N1 Aluminium alloys ≤ 12% Si: | 10-30 m/min |
| N2 Aluminium alloys > 12% Si: | 10-30 m/min |
| N3 Copper: | 10-25 m/min |
| N4 Bronze and brass: | 10-20 m/min |
|
No. of cutting edges (Z): |
3 |
| P1 Steel < 500 N/mm²: | 10-25 m/min |
| P2 Steel 500-700 N/mm²: | 10-25 m/min |
| P3 Steel 600-800 N/mm²: | 10-25 m/min |
| P4 Steel 800-1000 N/mm²: | 10-20 m/min |
| Product line: | VUSP |
| Shaft type: | Gew. Bohrer DIN 376 |
| Size: | M12 |
| Size square: | 7 |
| Substrate: | HSS-PM |
|
Thread pitch (P): |
1.75 |
| Thread size: | 12 |
| Thread standard: | M Metric ISO-thread |
| Tool tolerance: | ISO2X |
| Tool type: | Taps |
|
Ø Shaft (d): |
9 |
Login
No reviews found. Share your insights with others.
Recently Viewed
14 Stk. an Lager
EDM wire megacut plus 0.25 P10 900MPa
Gamma phase wire for all standard brass wire technologies; high cutting performance and precision; very good threading behaviour; considerable time and cost savings compared to pure brass eroding wire tasks.
